Abstract
Predicting the compressive strength of concrete is one of the complex problems in civil engineering because different parameters and factors must be considered. There is several research that have predicted the compressive strength of normal concrete using neuro-fuzzy systems. However, little research has been done to predict the strength of high strength concrete. Recently, machine learning techniques such as artificial neural networks (ANNs), fuzzy logic, and adaptive neuro-fuzzy inference system (ANFIS) are becoming extensively established in predicting complex problems. ANFIS has the advantages of both ANNs and fuzzy systems and is most suitable in engineering complicated applications. This study focuses on the development of ANFIS in predicting the compressive strength of high strength concrete. A total of 550 experimental datasets of concrete were used in this research. Each dataset was consisting of six input variables that were water, cement, fine and coarse aggregates, silica fume, and superplasticizer. The compressive strength of high strength concrete was considered as the output of the ANFIS model. In this study, 440 datasets were assigned as training datasets and 110 datasets were considered as testing sets to verify the ANFIS model. The mean square error (MSE) for the training set was 0.00573, and 0.00647 for the testing datasets. The ANFIS model was able to quickly predict the concrete compressive strength with high accuracy. Also, in this research, a sensitivity analysis was applied to study the contribution of input parameters to predict the compressive strength of concrete.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Ahmad, A., Ahmad, W., Aslam, F.: Compressive strength prediction of fly ash-based geopolymer concrete via advanced machine learning techniques. Case Stud Constr Mater 16, e00840 (2022)
Guçluer, K., Ozbeyaz, A., Goymen, S.: A comparative investigation using machine learning methods for concrete compressive strength estimation. Mater Today Commun 27, 102278 (2021)
Hakim, S.J.S., Abdul Razak, H: Frequency response function-based structural damage identification using artificial neural networks-a review. Res. J. Appl. Sci. Eng. Technol. 7(9), 1750–1764 (2014)
Akrami, S.A., Nourani, V.: Development of nonlinear model based on Wavelet-ANFIS for rainfall forecasting at Klang Gates Dam. Water Resour. Manage. 28(10), 2999–3018 (2014)
Akrami, S.A., Nourani, V., Hakim, S.J.S., Mohammadhassani, M: Using modified adaptive neural fuzzy and ANFIS-Wavelet for prediction of rainfall data. Environ. Eng. Manage. J. 13(9), 2201–2211 (2014)
Hakim, S.J.S., Abdul Razak, H: Application of artificial neural network on vibration test data for damage identification in bridge girder. Int. J. Physic. Sci. 6(35), 7991–8001 (2011)
Hakim, S.J.S., Irwan, J.M., Ibrahim, M.H.W., Ayop, S.S.: Structural damage identification employing hybrid Intelligence using artificial neural networks and vibration-based methods. J. Appl. Res. Technol. 20(2), 221–236 (2022)
Hakim, S.J.S., Ibrahim, M.H.W., Mohammadhassani, M., Yeoh, D., Jaini, Z.M., Chik, T.N.T.: Implementing fuzzy-based artificial intelligence approach for location of damage in structures. Civil Eng. Architect. 10(4), 1564–1573 (2022)
Kar, S., Pandit, A.R., Biswal, K.C: Prediction of FRP shear contribution for wrapped shear deficient RC beams using adaptive neuro-fuzzy inference system (ANFIS). Structures 23, 702–717 (2020)
Khademi, F., Akbari, M., Jamal, S.M: Prediction of compressive strength of concrete by data-driven models, i-manager's. J. Civil Eng. 5(2), 16–23 (2015).
Khademi, F., Jamal, S.M., Deshpande, N.: Londhe, S: Predicting strength of recycled aggregate concrete using artificial neural network, adaptive neuro-fuzzy inference system and multiple linear regression. Int. J. Sustain. Built Environ. 5(2), 355–369 (2016)
Noorzaei, J., Hakim, SJS., Jaafar, M.S., Abang Ali, A.A., Thanoon, W.A.M: An optimal architecture of artificial neural network for predicting compressive strength of concrete. Indian Concrete J. 81(8), 17–24 (2007)
Hakim, SJS., Noorzaei, J., Jaafar, M.S., Jameel, M., Mohammadhassani, M: Application of artificial neural networks to predict compressive strength of high strength concrete. Int. J. Physic. Sci. 6(5), 975–981 (2011)
Noorzaei, J., Hakim, S.J.S., Jaafar, M.S., Thanoon, W.A.M.: Development of artificial neural networks for predicting concrete compressive strength. Int. J. Eng. Technol. 4(2), 141–153 (2007)
Mansouri, I., Ozbakkaloglu, T., Kisi, O.: Xie, T: Predicting behavior of FRP-confined concrete using neuro fuzzy, neural network, multivariate adaptive regression splines and M5 model tree techniques. Mater. Struct. 49(10), 4319–4334 (2016)
Noorzaei, J., Jaafar, M.S., Thanoon, W.A.M.: Hakim, SJS: Development of an artificial neural network model for prediction of ultimate soil bearing capacity. Civil-Comp Proceed. 82, 102646 (2005)
Hakim, S.J.S., Razak, H.A: Damage identification using experimental modal analysis and adaptive neuro-fuzzy interface system (ANFIS). In: Conference Proceedings of the Society for Experimental Mechanics Series, 5, pp. 399–405 (2012)
Mohammadhassani, M., Nezamabadi-Pour, H., Jumaat, M., Jameel, M., Hakim, S.J.S.: Zargar, M: Application of the ANFIS model in deflection prediction of concrete deep beam. Struct. Eng. Mech. 45(3), 323–336 (2013)
Hakim, S.J.S.: Abdul Razak, H: Adaptive neuro fuzzy inference system (ANFIS) and artificial neural networks (ANNs) for structural damage identification. Struct. Eng. Mech. 45(6), 779–802 (2013)
Hakim, S.J.S., Abdul Razak, H., Ravanfar, S.A.: Ensemble neural networks for structural damage identification using modal data. Int. J. Damage Mechan. 25(3), 400–430 (2016).
Hakim, S.J.S., Razak, H.A., Ravanfar, S.A., Mohammadhassani, M.: Structural damage detection using soft computing method. Struct. Health Monitor. 5, 143–151 (2014).
Ozel, C.: Prediction of compressive strength of concrete from volume ratio and Bingham parameters using adaptive neuro-fuzzy inference system (ANFIS) and data mining. Int. J. Physic. Sci. 6(31), 7078–7094 (2011)
Vakhshouri, B.: Prediction of compressive strength of self-compacting concrete by ANFIS models. Neurocomputing 280, 13–22 (2018)
Golafshani, E.M., Behnood, A., Arashpour, M.: Predicting the compressive strength of normal and High-Performance Concretes using ANN and ANFIS hybridized with Grey Wolf Optimizer. Constr. Build. Mater. 232, 117266 (2020)
Pei, Z.: Prediction of the bond strength of FRP-to-concrete under direct tension by ACO-based ANFIS approach. Compos. Struct. 282, 115070 (2022)
Ahmad, M., Rashid, K., Tariq, Z.: Utilization of a novel artificial intelligence technique (ANFIS) to predict the compressive strength of fly ash-based geopolymer. Constr. Build. Mater. 301, 124251 (2021)
Dao, D.V., Ly, H.B., Trinh, S.H., Le, T.T., Pham, B.T.: Artificial intelligence approaches for prediction of compressive strength of geopolymer concrete. Materials 12 (2019)
Song, H., Ahmad, A., Farooq, F., Ostrowski, K.A., Maslak, M., Czarnecki, S.: Predicting the compressive strength of concrete with fly ash admixture using machine learning algorithms. Constr. Build. Mater. 308, 125021 (2021)
Nunez, I., Marani, A., Flah, M., Nehdi, M.L.: Estimating compressive strength of modern concrete mixtures using computational intelligence: a systematic review. Constr. Build. Mater. 310, 125279 (2021)
Chaabene, W.B., Flah, M., Nehdi, M.L.: Machine learning prediction of mechanical properties of concrete: critical review. Constr. Build. Mater. 260, 119889 (2020)
Nedushan, B.A.: Prediction of elastic modulus of normal and high strength concrete using ANFIS and optimal nonlinear regression models. Constr. Build. Mater. 36, 665–673 (2012)
Yusoff, A.R.M., Mokhatar, S.N., Budiea, A.M.A., Hakim, S.J.S.: A review: study on spent garnet as construction material. Int. J. Integrat. Eng. 14(5), 73–80 (2022).
Jang, J.S.R.: ANFIS: adaptive network-based fuzzy inference systems. IEEE Trans. Syst. Man Cybern. 23(3), 665–685 (1993)
Boga, A.R., Ozturk, M., Topcu, I.B.: Using ANN and ANFIS to predict the mechanical and chloride permeability properties of concrete containing GGBFS and CNI. Composites 45, 688–696 (2013)
Acknowledgements
Communication of this research is made possible through monetary assistance by Universiti Tun Hussein Onn Malaysia and the UTHM Publisher’s Office via Publication Fund E15216.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2024 The Author(s), under exclusive license to Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Hakim, S., Jamaluddin, N., Boon, K., Mokhatar, S., Khalifa, A., Jamellodin, Z. (2024). Development of Adaptive Neuro-Fuzzy Inference System to Predict Concrete Compressive Strength. In: Sabtu, N. (eds) Proceedings of AWAM International Conference on Civil Engineering 2022—Volume 2. AICCE 2022. Lecture Notes in Civil Engineering, vol 385. Springer, Singapore. https://doi.org/10.1007/978-981-99-6018-7_24
Download citation
DOI: https://doi.org/10.1007/978-981-99-6018-7_24
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-99-6017-0
Online ISBN: 978-981-99-6018-7
eBook Packages: EngineeringEngineering (R0)