Plasticisation effect on thermal, dynamic mechanical and tensile properties of injection-moulded glass-fibre/polyamide 6,6

Abd. Rahman, Nor Mas Mira and Hassan, Aziz and Yahya, Rosiyah (2010) Plasticisation effect on thermal, dynamic mechanical and tensile properties of injection-moulded glass-fibre/polyamide 6,6. Journal of Science and Technology, 3 (1). pp. 1-20. ISSN 1985-8809

[img]PDF - Published Version
482Kb

Official URL: http://penerbit.uthm.edu.my/ojs/index.php/JST

Abstract

Polymer composites of polyamide 6,6 reinforced with short glass fibre were prepared by injection moulding, conditioned under dry, 50% relative humidity and wet. Investigations by TGA, DSC, DMA and tensile tests were conducted. TGA results revealed that glass fibre loading in PA 6,6 improve the thermal stability of the composites. DSC analysis revealed that the incorporation of glass fibre and moisture into the PA 6,6 matrix resulted in a remarkable decrease in the degree of crystallinity. DMA results revealed the glass transition temperatures are sensitive to moisture absorption and their values move to a lower temperature upon exposure to moisture. Incorporation of glass fibre into the polyamide 6,6 gives rise to a significant improvement in tensile modulus and tensile strength, while tensile strain is reduced. Exposure to different environments from dry to wet conditions resulted in a decrease in the strength and modulus, while tensile strains decrease.

Item Type:Article
Uncontrolled Keywords:short-fibre composites; plasticisation effects; mechanical properties; thermal properties; dynamic mechanical analysis
Subjects:T Technology > TP Chemical technology > TP1080-1185 Polymers and polymer manufacture
ID Code:2084
Deposited By:Nurhafiza Hamzah
Deposited On:26 Jan 2012 10:56
Last Modified:26 Jan 2012 10:56

Repository Staff Only: item control page