Removal of As(III) and As(V) from water using green, silica-based ceramic hollow fibre membranes via direct contact membrane distillation

Hubadillah, Siti Khadijah and Othman, Mohd Hafiz Dzarfan and Sheikh Abdul Kadir, Siti Hamimah and Jamalludin, Mohd Riduan and Harun, Zawati and Abd Aziz, Mohd Haiqal and A. Rahman, Mukhlis and Jaafar, Juhana and Mikihiro, Nomura and Sawao, Honda and Iwamoto, Yuji and Fansuri, Hamzah (2019) Removal of As(III) and As(V) from water using green, silica-based ceramic hollow fibre membranes via direct contact membrane distillation. RSC Advances, 9 (6). pp. 3367-3376. ISSN 2046-2069

[img] Text
AJ 2019 (5).pdf
Restricted to Registered users only

Download (1MB) | Request a copy

Abstract

Arsenite [As(III)] and arsenate [As(V)] removal by direct contact membrane distillation (DCMD) using novel hydrophobic green, silica-based ceramic hollow fibre membranes derived from agricultural rice husk was investigated in this work. The green ceramic hollow fibre membranes were prepared from amorphous (ASHFM) and crystalline (CSHFM) silica-based rice husk ash and modified to be hydrophobic via immersion fluoroalkylsilane (FAS) grafting of 1H,1H,2H,2H-perfluorodecyltriethoxysilane. Superhydrophobic contact angle values up to 157° and 161° were obtained for ASHFM and CSHFM, respectively. Remarkably, the membrane surface morphology mimicked a look-alike lotus-leaf structure with decrement in pore size after grafting via the silane agent for both membranes. The effect of arsenic pH (3–11), arsenic concentration (1–1000 ppm) and feed temperature (50–80 °C) were studied and it was found that feed temperature had a significant effect on the permeate flux. The hydrophobic CSHFM, with a flux of 50.4 kg m−2 h−1 for As(III) and 51.3 kg m−2 h−1 for As(V), was found to be the best of the tested membranes. In fact, this membrane can reject arsenic to the maximum contaminant level (MCL) limit of 10 ppb under any conditions, and no swelling mechanism of the membranes was observed after testing for 4 hours.

Item Type: Article
Uncontrolled Keywords: NIL
Subjects: T Technology > TP Chemical technology > TP155-156 Chemical engineering
Divisions: Faculty of Mechanical and Manufacturing Engineering > Department of Manufacturing Engineering
Depositing User: Miss Afiqah Faiqah Mohd Hafiz
Date Deposited: 18 Oct 2021 07:43
Last Modified: 18 Oct 2021 07:43
URI: http://eprints.uthm.edu.my/id/eprint/2253

Actions (login required)

View Item View Item