Assessment of wind energy potential in the capital city of Chad, N’djamena

Didane, Djamal Hissein and Ab Wahab, Abas and Shamsudin, Syariful Syafiq and Rosly, Nurhayati and Zulkafli, Mohd Fadhli and Sofian, Mohd (2017) Assessment of wind energy potential in the capital city of Chad, N’djamena. AIP Conference Proceedings, 1831 (NIL). pp. 1-12. ISSN 0094-243X

[img] Text
AJ 2017 (723).pdf
Restricted to Registered users only

Download (1MB) | Request a copy

Abstract

In this study, statistical analysis of a long term meteorological data of 10 years have been presented to reveal the potential of wind power as a source of energy generation in the capital of Chad, N’Djamena. The recent ten-year period wind data were collected from the Hassan Djamous International Airport at N’Djamena. The wind characteristics and wind energy potential were analyzed using Weibull distribution function. The results show that the values of the shape parameter k, and scale parameter c, varied over a wide range. The annual highest values of the Weibull shape parameter k, and scale parameter c, were 1.59 and 4.12 m/s respectively. It was also found that higher wind speeds occurred during dry season, i.e. November to July and the lower wind speeds occurred during the wet season, i.e. August to October. The annual average of the most probable wind speed and wind speed carrying maximum energy were respectively 1.86 m/s and 6.48 m/s. Likewise, the wind power density was ranging between 55.96 W/m2 and 77.37 W/m2 and the corresponding annual energy density values ranged between 490 and 677 kWh/m2/year at 10 m height above ground. The highest wind power potential was found during the summer season which corresponds to the peak demand season of electricity in Chad. However, although the wind potential in this site is promising, it is concluded that it is adequate only for small-scale application.

Item Type: Article
Uncontrolled Keywords: NIL
Subjects: T Technology > TD Environmental technology. Sanitary engineering
Divisions: Faculty of Mechanical and Manufacturing Engineering > Department of Mechanical Engineering
Depositing User: Miss Nur Rasyidah Rosli
Date Deposited: 24 Jan 2022 08:25
Last Modified: 24 Jan 2022 08:25
URI: http://eprints.uthm.edu.my/id/eprint/5900

Actions (login required)

View Item View Item