Extraction of volatile fatty acids from leachate via liquid-liquid extraction and adsorption method

Razali, Yasmin Syafikah and Tajarudin, Husnul Azan and Daud, Zawawi (2018) Extraction of volatile fatty acids from leachate via liquid-liquid extraction and adsorption method. International Journal of Integrated Engineering, 10 (9). pp. 79-84. ISSN 2229-838X

Text AJ 2018 (971) Extraction of volatile fatty acids from leachate via liquid-liquid extraction and adsorption method.pdf Restricted to Registered users only Download (188kB) | Request a copy

Abstract

Volatile fatty acids (VFAs) are used in wide range of commercially-important chemicals. Treatment of leachate at landfills by fermentation process will produce VFAs (butyric acid, acetic acid, propionic acid, isovaleric acid and isobutyric acid) can be considered as a replacement for petroleum-based VFA due to their degradability, renewability and sustainability. Therefore, separation of VFAs residue after the leachate treatment is important and essential from the point of view of pollution control and recovery of useful material. The aim of this study is to compare the percentage of VFAs extracted between liquid-liquid extraction and adsorption method. The VFAs extracted in this study were acetic and butyric acids produced from the fermentation of leachate using Clostridium butyricum. Response surface methodology (RSM) was used using central composite design (CCD) to optimize the parameters that affect the extraction of acetic and butyric acids. Liquid-liquid extraction using petroleum ether (69/80) with optimum parameters (temperature: 35 oC, pH: 4.8, agitation: 175.4 rpm, incubation time: 16.8 h and volume of treated leachate: 14.1 %) showed that the acetic acid and butyric acid extracted were 28.1% and 88.8% respectively. On the other hand, adsorption method using activated carbon showed the highest extraction percentage of acetic acid, 87.4% and butyric acid 94.1% with the optimum parameters of pH 3.0, 19.8 % activated carbon weight, 40 oC, 9.5 h incubation time and 179.9 rpm agitation speed

Item Type:	Article
Uncontrolled Keywords:	Acetic acid; adsorption; butyric acid; chemical extraction; leachate; liquid-liquid extraction
Subjects:	T Technology > TA Engineering (General). Civil engineering (General) > TA170-171 Environmental engineering
Divisions:	Faculty of Civil Engineering and Built Environment > Department of Civil Engineering : Water and Environmental Engineering
Depositing User:	UiTM Student Praktikal
Date Deposited:	26 Jan 2022 02:23
Last Modified:	26 Jan 2022 02:23
URI:	http://eprints.uthm.edu.my/id/eprint/6021

Actions (login required)

View Item