Abdul Hamid, Noor Azlina and Abdullah, Ramli and Adnan, Suraya Hani and Jamellodin, Zalipah and A. Majid, Masni and Salleh, Norhafizah and Md. Noor, Nurazuwa (2020) Performance of independent horizontal and inclined bars as shear reinforcement for reinforced concrete beams. Journal of Advanced Research In Dynamical and Control Systems, 12 (2). pp. 608-614. ISSN 1943023X
Text
AJ 2020 (235).pdf Restricted to Registered users only Download (308kB) | Request a copy |
Abstract
This paper presents an experimental results of concrete beams reinforced with new shear reinforcement design of using independent horizontal and inclined bars. A total of six beams, measuring 200 mm width x 250 mm height x 2300 mm length were tested up to failure under four-point loading. The effectiveness of using independent horizontal and inclined bars to the shear carrying capacity of the beam was investigated. The independent horizontal and inclined bars with reinforcement ratios between 1.0% and 2.9% were provided in reinforced concrete beams. All the beams were cast with normal grade of concrete compressive strength between 30 to 35 MPa. The performance of the tested beams in terms of ultimate load, mid-span deflection and crack patterns were recorded and compared. The test results showed that beams reinforced with independent horizontal and inclined bars of 1.9% and 2.9% experienced higher shear load capacities than beams with conventional shear reinforcement system. It can be concluded that the use of independent horizontal and inclined bars as shear reinforcement gives good shear resistant for the beams. Furthermore, these types of shear reinforcement system are more flexible, simple which significantly reduced the congestion of vertical links within shear span zone.
Item Type: | Article |
---|---|
Uncontrolled Keywords: | Shear Reinforcement; Concrete Beam; Shear Crack. |
Subjects: | T Technology > TH Building construction > TH1000-1725 Systems of building construction. Including fireproof construction, concrete construction |
Divisions: | Faculty of Civil Engineering and Built Environment > Department of Civil Engineering : Structural and Materials Engineering |
Depositing User: | Miss Afiqah Faiqah Mohd Hafiz |
Date Deposited: | 27 Jan 2022 04:57 |
Last Modified: | 27 Jan 2022 04:57 |
URI: | http://eprints.uthm.edu.my/id/eprint/6200 |
Actions (login required)
View Item |