Effect of empty fruit bunch (EFB) fibre reinfoced low density polyethylena epoxy (LDPE) composites on mechanical propeties

Ahmad, Sufizar and Ismail, Al Emran (2005) Effect of empty fruit bunch (EFB) fibre reinfoced low density polyethylena epoxy (LDPE) composites on mechanical propeties. In: International Conference on Natural Resources and Environmental Management 2005 (NREM2005), 28-29 November 2005.

[img]
Preview
PDF
8Mb

Abstract

Polymers are materials with low strength and stiffness. Normally, fillers that act as strengthen medium are added to improve the mechanical properties of LDPE and composite LDPE reinforced EFB in different weight percentages, which are 1%, 2%, 3%, 4% and 5% were examined. EFB are residual organic fiber from oil palm processing and it is cheaper, light and recyclable. EFB that used were produced in the size between 1mm to 2mm. Previous research had been referring to identify the degradation temperature of LDPE and EFB. Specimens of this research were prepared through injection moldings method by using 160°C of barrel temperature, 80°C of mould temperature and 6.5 bar of pressure. Three mechanical tests had been done, included tensile tests (ISO R527) for Young's modulus and ultimate tensile strength, Charpy impact tests (ISO 179) to determine the impact strength and Shore durometer hardness tests (ASTM D2240) for hardness property. From the test result, mechanical properties were compared between LDPE and composites LDPE-EFB and the effects of increasing EFB content were also observed. Results indicated that Young's modulus and ultimate tensile strength increased after added EFB. Charpy impact strength for composite LDPE-EFB was lopwer that LDPE and decreasing with increasing weight fraction of EFB. Meanwhile, hardness for composites LDPE-EFB was greater than LDPE and increase with increasing weight fraction of EFB to 4%. When exceeded 4%, hardness of the composites decrease.

Item Type:Conference or Workshop Item (Paper)
Subjects:T Technology > TA Engineering (General). Civil engineering (General) > TA401-492 Materials of engineering and construction. Mechanics of materials
Divisions:Faculty of Mechanical and Manufacturing Engineering > Department of Materials Engineering and Design
ID Code:6785
Deposited By:En. Sharul Ahmad
Deposited On:15 Jun 2015 15:51
Last Modified:15 Jun 2015 15:51

Repository Staff Only: item control page