Fused deposition modeling of PCL/HA/MMT biocompatible polymer nano-composites

Wahab, Md Saidin and Wahid, M. U. and Abdul Haq, Reazul Haq (2015) Fused deposition modeling of PCL/HA/MMT biocompatible polymer nano-composites. In: International Conference on Advanced Computational Engineering and Experimenting (ACEX 2015)g, 29 June - 2 July 2015, Munich, Germany.

Full text not available from this repository.

Abstract

This paper presents the development of biocompatible polymer nano-composite material for Additive Manufacturing (AM) technology, particularly for Fused Deposition Modelling (FDM) process. The material was prepared by mechanical blending using single screw extruder nanomixer of Polycaprolactone (PCL), Montmorillonite (MMT) and Hydroxyapatite (HA). The amount of MMT material was varied from 2 - 4 (wt %) and the HA was fixed at 10 (wt %). Then, the blended material was crushed and fed into single screw extruder to produce a filament of 1.8 mm diameter. The material was characterized on mechanical properties, biocompatibility and manufacturability on fused deposition modeling machine. The results show an improvement in tensile and flexural properties by increasing the MMT. The SEM image shows the bulk formation of apatite layers on the composite surface which confirmed the bioactivity on the material. The material also was successfully tested on the fused deposition modeling machine, where rapid production of customize implant component can be produced

Item Type:Conference or Workshop Item (Paper)
Subjects:T Technology > TA Engineering (General). Civil engineering (General) > TA401-492 Materials of engineering and construction. Mechanics of materials
Divisions:Faculty of Mechanical and Manufacturing Engineering > Department of Manufacturing and Industrial Engineering
ID Code:6981
Deposited By:Mrs. Nurhayati Ali
Deposited On:12 Aug 2015 12:22
Last Modified:12 Aug 2015 12:22

Repository Staff Only: item control page