XFEM modelling of multi-holes plate with single-row and staggered holes configurations

Supar, Khairi and Ahmad, Hilton (2016) XFEM modelling of multi-holes plate with single-row and staggered holes configurations. In: International Symposium on Civil and Environmental Engineering 2016, 5-6 December 2016, Novotel Melaka.

Full text not available from this repository.

Official URL: DOI:10.1051/matecconf/201710302031

Abstract

Joint efficiency is the key to composite structures assembly design, good structures response is dependent upon multi-holes behaviour as subjected to remote loading. Current benchmarking work were following experimental testing series taken from literature on multi-holes problem. Eleven multi-hole configurations were investigated with various pitch and gage distance of staggered holes and non-staggered holes (singlerow holes). Various failure modes were exhibited, most staggered holes demonstrates staggered crack path but non-staggered holes series displayed crack path along net-section plane. Stress distribution were carried out and good agreement were exhibited in experimental observation as reported in the respective literature. Consequently, strength prediction work were carried out under quasi-static loading, most showed discrepancy between 8% -31%, better prediction were exhibited in thicker and non-staggered holes plate combinations.

Item Type:Conference or Workshop Item (Paper)
Subjects:T Technology > TH Building construction > TH845-895 Architectural engineering. Structural engineering of buildings
Divisions:Faculty of Civil and Environmental Engineering > Department of Structural and Material Engineering
ID Code:9553
Deposited By:Mr. Mohammad Shaifulrip Ithnin
Deposited On:13 Aug 2018 11:23
Last Modified:13 Aug 2018 11:23

Repository Staff Only: item control page