UTHM Institutional Repository

Effects of runner diameter on the mechanical strength and porosity distribution of thin section castings

Hashim, Mohd Yussni and Mohd Amin, Azriszul and Vijay, R. Raghavan (2007) Effects of runner diameter on the mechanical strength and porosity distribution of thin section castings. In: Regional Conference on Engineering Mathematics, Mechanics, Manufacturing & Architecture (EM3ARC) 2007, 2007.

[img] PDF

Download (241kB)


This study was aimed to determine the effects of runner diameter on mechanical strength and porosity distribution pattern of thin section Al-12Si alloy castings which were casted through sand casting process. Computational fluid dynamic (CFD) modeling was used to identify the flow behavior during the filling process. X-ray radiography test was used to examine the general distribution of defects in the castings from different runner diameters. 3-point bending test was applied to measure the flexure strength. The scatter of flexure strength results was quantified by Weibull statistics. The casting defects existing on the fracture surface of the casting specimens were observed by scanning electron microscope (SEM). Simulation results show that predicted porosity location moved to ingate and runner area when the size of runner diameter is increased. This gives good agreement with experimental results, which showed that the casting product with a larger runner diameter leads to the improvement of average flexure strength and reduction of porosity defects. Both results support the conclusion that the use of runner with a larger diameter size can produce casting product with more reliable mechanical properties and fewer porosity defects. An area ratio of unity is recommended in some cases.`

Item Type: Conference or Workshop Item (Paper)
Uncontrolled Keywords: aluminum casting; runner system design; casting defect; weibull statistic
Subjects: T Technology > TA Engineering (General). Civil engineering (General) > TA401-492 Materials of engineering and construction. Mechanics of materials
Divisions: Faculty of Mechanical and Manufacturing Engineering > Department of Manufacturing and Industrial Engineering
Depositing User: Normajihan Abd. Rahman
Date Deposited: 09 Sep 2013 09:15
Last Modified: 21 Jan 2015 07:50
URI: http://eprints.uthm.edu.my/id/eprint/4125
Statistic Details: View Download Statistic

Actions (login required)

View Item View Item


Downloads per month over past year