UTHM Institutional Repository

Development of wood base material for rapid prototyping process

Wahab, Md Saidin (2009) Development of wood base material for rapid prototyping process. Other thesis, Universiti Tun Hussein Onn Malaysia.

[img]
Preview
PDF
0573.pdf

Download (757kB)

Abstract

This document presents initial development of wood-based composites with the aim to develop an alternative material at low cost for rapid prototyping process. Powder blends containing wood powder (90-120pm) with commercial ZP102 as a plaster powder material from ZCorporation were mechanically blended to produce different composition of (vol. %) 25:70, 5050 and 75:25 respectively. The blended material were successfully processed on 3D printers (2406) which was used as a rapid prototyping machine to produce three-dimensional components and followed by post-treatment with ZMax solution to improve the mechanical properties. The mechanical properties, dimensional accuracy and surface quality of the build components were evaluated and the results were compared with the unfilled ZP102 material. The result shows that the mechanical properties were improved with the increasing of wood powder content to 50 vol. %. However, dimensional accuracy and surface quality were decreased as the wood content increased. Further work on powder preparation is required in order to fully realize these performance benefits particularly for surface quality improvement.

Item Type: Thesis (Other)
Subjects: T Technology > TS Manufactures > TS155-194 Production management. Operations management
Divisions: Faculty of Mechanical and Manufacturing Engineering > Department of Manufacturing and Industrial Engineering
Depositing User: Normajihan Abd. Rahman
Date Deposited: 23 Jun 2014 08:24
Last Modified: 23 Jun 2014 08:24
URI: http://eprints.uthm.edu.my/id/eprint/5575
Statistic Details: View Download Statistic

Actions (login required)

View Item View Item

Downloads

Downloads per month over past year