UTHM Institutional Repository

Mixing and characterisation of stainless steel 316L feedstock for waste polystyrene binder system in metal injection molding (MIM)

Asmawi, Rosli and Ibrahim, Mohd Halim Irwan and Mohd Amin, Azriszul (2014) Mixing and characterisation of stainless steel 316L feedstock for waste polystyrene binder system in metal injection molding (MIM). Applied Mechanics and Materials Journal, 607. pp. 83-86. ISSN 1660-9336

[img]
Preview
PDF
rosli_asmawi_U.pdf

Download (369kB)

Abstract

This paper describes the mixing process and homogeneity analysis of a newly developed binder system based on waste polystyrene (PS) and palm kernel oil (PKO) to produce feedstock for metal injection molding (MIM). Since mixing is a critical step in MIM process, hence the mixture of powder and binder should be homogeneous and injectable. In this study, water atomised Stainless Steel powder was mixed with a new binder system consisting of waste polystyrene and palm kernel oil in a Brabender Plastograph EC rotary mixer. Several tests were performed to assess the homogeneity of the feedstock that was produced at 60 vol.% powder loadings. The 60 vol.% was chosen because the Critical Powder Volume Concentration (CPVC) of the SS316L powder was found to be 64.8 vol.%. The tests conducted were density, binder burn-out and SEM morphology observation. It was found that the feedstock shows good homogeneity and suitable for further processing in MIM.

Item Type: Article
Uncontrolled Keywords: homogeneity; metal injection molding (MIM); mixing
Subjects: T Technology > TN Mining engineering. Metallurgy
Divisions: Faculty of Mechanical and Manufacturing Engineering > Department of Engineering Mechanics
Depositing User: Normajihan Abd. Rahman
Date Deposited: 12 Mar 2015 06:51
Last Modified: 12 Mar 2015 06:51
URI: http://eprints.uthm.edu.my/id/eprint/6499
Statistic Details: View Download Statistic

Actions (login required)

View Item View Item

Downloads

Downloads per month over past year