Items where Author is "Ahmad, Sufizar "

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Item Type | No Grouping
Number of items: 23.

Article

Mat Noor, Fazimah and Jamaludin, K. R. and Ahmad, Sufizar and Ibrahim, Rosdi and Mat Rosip, Noor Idayu (2014) Development and characterization of SS316L foam prepared by powder metallurgy route. Applied Mechanics and Materials, 534 (1). pp. 31-37. ISSN 1662-7482

Ahmad, Sufizar and Halim, N.H. and Taib, Hariati and Harun, Zawati (2014) Effect of sintering temperature on the physical properties of titania-alumina-silver nitrate foam. Applied Mechanics and Materials , 465 .

Ahmad, Sufizar and Muhamad, N. and Muchtar, Andanastuti and Sahari, J. and Jamaludin, K. R. and Ibrahim , Mohd Halim Irwan and Mohamad Nor, N. H. (2014) Influence of composition and sintering temperature on density for pure and titanium alloy foams. Jurnal Teknologi, 68 (4). pp. 83-86. ISSN 2180-3722

Sulaiman, Syazwan Liyana and Harun, Zawati and Ahmad, Sufizar and Taib, Hariati (2013) Synthesis of poly(vinyl alcohol)/chitosan/titanium oxide beads. Jurnal Teknologi, 65 (4). pp. 25-28. ISSN 21803722

Conference or Workshop Item

Abdullah, Z. and Ahmad, Sufizar and Rafter, M. F. M. and Ab Manaf, Nur Suliani (2015) Fabrication of 316L stainless steel foams via powder metallurgy technique. In: International Engineering Research and Innovation Symposium 2015 (IRIS), 12–13 September 2015, Putrajaya, Malaysia.

Natrah, Siti and Hussin, Rosniza and Taib, Hariati and Ahmad, Sufizar and Abd Rahman, Hamimah and Hanapi, lkhmal and Mat Kasa, Nassari (2015) Investigate suitable slnterlng temperature to produce claytan porcelain ceramic with addition of feldspar. In: International Conference on Knowledge Transfer (ICKT 2015), 1-3 December 2015, Putrajaya, Malaysia.

Azmi, Mohd Azham and Ismail, S. Hajar and Mahzan, Shahruddin and Ahmad, Sufizar and Mohd Taib, Hariati (2015) Mechanical properties of polydimethylsiloxanes (PDMS) reinforced silica derived rice husk ash. In: Malaysian Polymer International Conference, 10-11 Jun 2015, Palm Garden Hotel, Putrajaya, Malaysia.

Rafter, M. F. M. and Ahmad, Sufizar and Ibrahim, R. and Hussin, R. (2014) Development of stainless steel (SS316L) foam with different composition using compaction method. In: International Conference on X-Ray & Related Technique in Research and Industry (ICXRI2014), 11-13 August 2014 , Johor Bahru, Johor.

Bakar, M. Subri A. and Ahmad, Sufizar and Abd Rahman, Hamimah and Basri, Hatijah and A., Muchtar (2014) EDS and TG analysis of composite cathode powders LSCF-SDCC for low temperature solid oxide fuel cells (LTSOFC). In: International Integrated Engineering Summit (IIES 2014), 1-4 December 2014, Universiti Tun Hussein Onn Malaysia, Johor.

Ismail, N. A. A. and Azmi, Mohd Azham and Ahmad, Sufizar and Mohd Taib, Hariati (2014) Effect of rice husk firing temperature on synthesis of silica (Si02). In: International Conference on X-Ray & Related Technique in Research and Industry (ICXRI2014), 11-13 August 2014 , Johor Bahru, Johor.

Mat Noor, Fazimah and Mat Rosip, N. I. and Jamaludin, Khairur Rijal and Ahmad, Sufizar (2014) Effects of sintering temperature on the properties of stainless steel foam. In: International Conference on X-Ray & Related Technique in Research and Industry (ICXRI2014), 11-13 August 2014 , Johor Bahru, Johor.

Agun, Linda and Abu Bakar, Muhammad Subri and Ahmad, Sufizar and Andanastuti, Muchtar and Abd Rahman, Hamimah (2014) Influence of Ag on the chemical and thermal compatibility of LSCF-SDCC for LT-SOFC. In: International Integrated Engineering Summit (IIES 2014), 1-4 December 2014, Universiti Tun Hussein Onn Malaysia, Johor.

Agun, Linda and Abd Rahman, Hamimah and Ahmad, Sufizar and Muchtar, Andanastuti (2014) Influence of binary carbonate on the properties of low temperature cathode composite SOFC. In: International Conference on X-Ray & Related Technique in Research and Industry (ICXRI2014), 11-13 August 2014 , Johor Bahru, Johor.

Mat Rosip, Noor Idayu and Ahmad, Sufizar and Jamaluddin, K. R. and Mat Noor, Fazimah and Mohd Taib, Hariati (2014) Morphological analysis of SS316L foam produced by using slurry method. In: International Conference on X-Ray & Related Technique in Research and Industry (ICXRI2014), 11-13 August 2014 , Johor Bahru, Johor.

Ab Manaf, Nur Suliani and Ahmad, Sufizar and Ibrahim, Rosziati and Kamdi, Z. and Ismail, A. (2014) Producing of cobait chromium molybdenum (CoCrMo) foam by replication method. In: International Conference on X-Ray & Related Technique in Research and Industry (ICXRI2014), 11-13 August 2014 , Johor Bahru, Johor.

Harun, Zawati and Kamarudin, Noor Hasliza and Ibrahim, Mustaffa and Idris, Maizlinda Izwana and Ahmad, Sufizar (2014) Reinforced green ceramic shell mould for investment casting process. In: International Conference on X-Ray & Related Technique in Research and Industry (ICXRI2014), 11-13 August 2014 , Johor Bahru, Johor.

Azmi, Mohd Azham and Yahya, S. M. and Ahmad, Sufizar and Taib, Hariati (2014) Tensile behaviour and fracture characteristics of polydimethylsiloxane (PDMS) filled silica composites. In: International Conference on X-Ray & Related Technique in Research and Industry (ICXRI2014), 11-13 August 2014, Johor Bahru, Johor.

Ahmad, Sufizar and Bakar, M. S. A. and Rahman, H. A. and Basri, Hatijah and Mukhtar, Affidah Mardziah (2014) XRD and EDS analysis of composite cathode powders LSCF-SDCC-Ag for low temperature solid oxide fuel cells (LTSOFC). In: International Conference on X-Ray & Related Technique in Research and Industry (ICXRI2014), 11-13 August 2014, Johor Bahru, Johor.

Mad Rosip, N. I. and Ahmad, Sufizar and Jamaludin, K. R. and Mat Noor, Fazimah (2013) Producing of 316L stainless steel (SS316L) foam via slurry method. In: International Conference on Mechanical Engineering Research (ICMER2013), 1-3 July 2013, Kuantan, Pahang.

Jamaludin, Khairur Rijal and Muhamad, Norhamidi and Ab. Rahman, Mohd Nizam and M. Amin, Sri Yulis and Ahmad, Sufizar and Ibrahim , Mohd Halim Irwan and Murtadhahadi, Murtadhahadi and Mohamad Nor, Nor Hafiez (2009) Moulding parameter optimisation for the best sintered density. In: Proceedings of the World Congress on Engineering 2009, 1-3 July 2009, London.

Ahmad, Sufizar and Ismail, Al Emran (2005) Effect of empty fruit bunch (EFB) fibre reinfoced low density polyethylena epoxy (LDPE) composites on mechanical propeties. In: International Conference on Natural Resources and Environmental Management 2005 (NREM2005), 28-29 November 2005.

Ahmad, Sufizar and Abu Kassim, Mohamad Azizi Fabrication of titanium foam by using compaction method. In: 26th Regional Conference on solid state science & technology 2011, 22 - 24 Nov 2011, Negeri Sembilan Malaysia.

Thesis

Ahmad, Sufizar (2012) Kesan parameter pensinteran terhadap sifat mekanikal dan fizikal aloi titanium berbusa menggunakan Kaedah Taguchi. Other thesis, Universiti Tun Hussein Onn Malaysia.

This list was generated on Wed Nov 22 12:48:22 2017 MYT.