UTHM Institutional Repository

Items where Author is "Alimin, Ahmad Jais"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Item Type | No Grouping
Number of items: 35.

Article

Mahal, Sabah K. and Alimin, Ahmad Jais (2016) A review of the hybrid solar chimney and water desalination systems for simultaneous production of electricity and fresh water. International Review of Mechanical Engineering (I.RE.M.E.), 10 (6). pp. 419-436. ISSN 19708734

Hushim, Mohd Faisal and Alimin, Ahmad Jais and Razali, Mohd Azahari and Mohammed, Akmal Nizam and Sapit, Azwan and Mendez Carvajal, Julio Cesar (2016) Air flow behaviour on different intake manifold angles for small 4-stroke PFI retrofit kit system. ARPN Journal of Engineering and Applied Sciences, 11 (12). pp. 7565-7571. ISSN 18196608

Muslim, Mohd Taufiq and Selamat, Hazlina and Alimin, Ahmad Jais and Mohd Rohi, Noorfaizah and Hushim, Mohd Faisal (2014) A review on retrofit fuel injection technology for small carburetted motorcycle engines towards lower fuel consumption and cleaner exhaust emission. Renewable and Sustainable Energy Reviews, 35. pp. 279-284. ISSN 13640321

Khalid , Amir and Manshoor, Bukhari and Alimin, Ahmad Jais and Mustafa, Norrizal and Basharie , Siti Mariam and Sadikin, Azmahani (2014) Performance and Emission of a Diesel Engine Fuelled With Preheated Palm Oil Biodiesel under High Load Conditions. Advanced Materials and Research Vols. 845 (2014), 845. pp. 61-65.

Osman, Shahrul Azmir and Alimin, Ahmad Jais and lsmail, Mohd Yusri and Koh, Wern Hui (2014) Performance and emission characteristics of direct injection C.I engine retrofitted with mono-CNG system. Applied Mechanics and Materials, 446. pp. 443-447. ISSN 16627482

Alimin, Ahmad Jais and Ismail, Muhammad Yusri and Osman, Shahrul Azmir (2014) Predicting the performance and emissions characteristics of a medium duty engine retrofitted with compressed natural gas system using 1-dimensional software. Applied Mechanics and Materials, 660. pp. 468-473. ISSN 1662-7482

Khalid , Amir and Mustafa, Norrizal and Manshoor, Bukhari and Zakaria, Hanis and Alimin, Ahmad Jais and Leman, Abd Mutalib and Sadikin, Azmahani (2014) The comparison of preheat fuel characteristics of biodiesel and straight vegetable oil. Applied Mechanics and Materials Vols. 465-466 (2014), 456. pp. 161-166.

Hushim, Mohd Faisal and Alimin, Ahmad Jais and Selamat, Hazlina and Muslim, Mohd Taufiq (2013) PFI system for retrofitting small 4-stroke gasoline engines. International Journal of Environmental Science and Development, 4 (4). pp. 375-378. ISSN 20100264

Amirnordin, Shahrin Hisham and Alimin, Ahmad Jais and Khalid , Amir (2013) Effects of palm oil biodiesel blends on the emissions of oil burner. Applied Mechanics and Materials , 315. pp. 956-959.

Book Section

Razali, Mohd Azahari and Alimin, Ahmad Jais and Mohd Ali, Mas Fazwi and Khalid, Amir and Sapit, Azwan and Manshoor, Bukhari and Hushim, Faisal and Mohamed, Akmal Nizam (2017) Exploration the effect of particle size in thermophoresis phenomenon under microgravity environment. In: Recent Research and Developments in Centre for Energy and Industrial Environment Studies. Series 1 . Penerbit UTHM, pp. 35-44. ISBN 9789670764955

Khalid , Amir and Abdul Wahab, Abas and Alimin, Ahmad Jais and Ariffin, Affirul Chairil and Omar, Rosli and Manshoor, Bukhari and Amirnordin, Shahrin Hisham and Mustafa, Norrizal (2017) Exploration the new concept of mixture formation during early stage of burning process in bio-diesel combustion. In: Recent Research and Developments in Centre for Energy and Industrial Environment Studies. Series 1 . Penerbit UTHM, pp. 1-12. ISBN 9789670764955

Amirnordin, Shahrin Hisham and Abd Rahman, Hamimah and Othman, Khairul Nor and Hassan, Mohd Fahrul and Alimin, Ahmad Jais (2008) Effects of porous ceramic/zeolite to the exhaust system of gasoline engine. In: International Conference on Mechanical and Manufacturing Engineering 2008 (ICME2008) : 21-23 May 200, Johor Baharu. Universiti Tun Hussein Onn Malaysia, Batu Pahat, Johor, pp. 1-6. ISBN 9789832963592

Conference or Workshop Item

Hushim, Mohd Faisal and Alimin, Ahmad Jais and Razali, Mohd Azahari and Mohammed, Akmal Nizam and Sapit, Azwan and Mendez Carvajal, Julio Cesar (2015) Air flow behaviour on different intake manifold angles for small 4-stroke PFI retrofit kit system. In: International Engineering Research and Innovation Symposium 2015 (IRIS), 12–13 September 2015, Putrajaya, Malaysia.

Osman, Shahrul Azmir and Alimin, Ahmad Jais and Ismail, Mohd Yusri and Koh, Wern Hui (2013) Performance and emission characteristics of direct injection C.I engine retrofitted with mono-CNG system. In: Asia Conference on Mechanical and Materials Engineering (ACMME 2013) , 8-9 October 2013, Wuhan, China .

Hushim, Mohd Faisal and Alimin, Ahmad Jais and Mansor, Mohd Farris (2011) Effect of intake manifold angle of port-fuel injection retrofit-kit to the performances of an S.I. engine. In: Regional Conference on Automotive Research, 14th-15th December 2011, Kuala Lumpur.

Hushim, Mohd Faisal and Alimin, Ahmad Jais and Abdul Rashid, Lukman and Chamari, Mohd Firdaus (2011) Influence of fuel injector position of port-fuel injection retrofit-kit to the performances of small gasoline engine. In: 4th International Meeting on Advances in Thermofluids, 3rd-4th October 2011 , Melaka.

Hushim, Mohd Faisal and Alimin, Ahmad Jais and Mohammad, Md Nor Anuar and Madon, Rais Hanizam and Osman, Shahrul Azmir and Amirnordin, Shahrin Hisham and Salleh, Hamidon and Mohideen Batcha, Mohd Faizal (2011) Application of green technologies for UTHM in realizing the green campus concept. In: 2nd International Conference on Mechanical and Manufacturing Engineering (ICME 2011), 6th-7th June 2011, Putrajaya International Convention Centre, Putrajaya.

Hushim, Mohd Faisal and Osman, Shahrul Azmir and Alimin, Ahmad Jais and Mohamad, Akmal Nizam and Mustafa, Norrizal and Md Seri, Suzairin and Amirnordin, Shahrin Hisham and Wan Salim, Wan Saiful-Islam and Salleh, Hamidon and Azlan, Mohd Azwir (2011) Perodua Eco-Challenge 2010: ideas of modification from ARG UTHM. In: 2nd International Conference on Mechanical and Manufacturing Engineering (ICME 2011), 6th-7th June 2011, Putrajaya International Convention Centre, Putrajaya.

Hushim, Mohd Faisal and Alimin, Ahmad Jais and Mohideen Batcha, Mohd Faizal and Mohd Ali, Mas Fawzi and Abdul Rashid, Lukman (2011) Port-fuel injection system for small 4-stroke single cylinder engine: an experimental framework. In: 2nd International Conference on Mechanical and Manufacturing Engineering (ICME 2011), 6th-7th June 2011, Putrajaya International Convention Centre, Putrajaya.

Amirnordin, Shahrin Hisham and Wan Salim, Wan Saiful-Islam and Ariffin, Mohd Faiz and Md Seri, Suzairin and Mohamad, Akmal Nizam and Abd Rahman, Hamimah and Taib, Ishkrizat and Alimin, Ahmad Jais (2010) Numerical analysis on the effects of air flow in the wake of a large vehicle on trailing a passenger car. In: Malaysian Technical Universities Conference on Engineering and Technology (MUCET) 2010. .

Amirnordin, Shahrin Hisham and Abd Rahman, Hamimah and Md Nor, Nor Azmah and Ahmad Hudin, Ahmad Sobri and Rahmat, Norwahdah and Mohd Ali, Mas Fawzi and Alimin, Ahmad Jais and Mohideen Batcha, Mohd Faizal and Wan Salim, Wan Saiful-Islam and Md Seri, Suzairin (2010) Pressure drop characteristic of alumina-zeolite porous Ceramic Filter and Its Effects in Engine Performance. In: The 2nd International Conference on Engineering and ICT (iCEi) 2010. , 18-20 February, 2010, Melaka.

Hushim, Mohd Faisal and Alimin, Ahmad Jais (2010) A review and investigation framework on port-fuel injection for small 4-stroke single cylinder engine. In: Postgraduate Seminar 2010, 29th and 30th November 2010, Universiti Tun Hussein Onn Malaysia.

Amirnordin, Shahrin Hisham and Abd Rahman, Hamimah and Ahmad Hudin, Ahmad Sobri and Rahmat, Norwahdah and Mohd Ali, Mas Fawzi and Md Seri, Suzairin and Alimin, Ahmad Jais and Mohideen Batcha, Mohd Faizal and Wan Salim, Wan Saiful-Islam (2009) Effects of alumina foam coated with stanum (IV) oxide on the emission of gasoline engine. In: 2nd International Conference on Engineering Technology 2009 (ICET 2009), 8-10, December 2009, Kuala Lumpur.

Amirnordin, Shahrin Hisham and Abd Rahman, Hamimah and Ahmad Hudin, Ahmad Sobri and Rahmat, Norwahdah and Mohd Ali, Mas Fawzi and Alimin, Ahmad Jais and Mohideen Batcha, Mohd Faizal and Wan Salim, Wan Saiful-Islam (2009) Porous alumina-zeolite as a hydrocarbon trap in SI engine. In: 4th International Conference on Recent Advances in Materials, Minerals and Environment and 2nd Symposium on Materials and Processing 2009, 1-3 June, 2009, Penang.

Mohd Taib, Mohsein and Alimin, Ahmad Jais and Amirnordin, Shahrin Hisham and Abd Rahman, Hamimah and Mohd Ali, Mas Fawzi (2009) Reduction of Soot Emission from Diesel Fuel Engine Using a Novel Diesel Particulate Filter. In: International Conference on Advances in Designs and Mechanical Engineering (ICADME) 2009., 11-13, October 2009, Universiti Malaysia Perlis, Kangar.

Taib, Mohd Muhsein and Alimin, Ahmad Jais and Amirnordin, Shahrin Hisham and Abd Rahman, Hamimah (2009) Reduction of soot emission from diesel fuelled engine using a novel after treatment system. In: Malaysian Technical Universities Conference on Engineering and Technology (MUCEET 2009), 20-22 June 2009, Kuantan, Pahang.

Alimin, Ahmad Jais and Benjamin, Stephen F. and Roberts, Carol A. (2007) Fuel penalty from periodic rich combustion of a diesel fuelled engine during lean NOx trap purging. In: 1st Engineering Conference (EnCon 2007), 28 December 2007, Universiti Malaysia Sarawak, Sarawak.

Amirnordin, Shahrin Hisham and Abd Rahman, Hamimah and Mat Yusof, Mohamad Raddi and Md Seri, Suzairin and Mohideen Batcha, Mohd Faizal and Wan Salim, Wan Saiful-Islam and Alimin, Ahmad Jais Effects of catalytic muffler on the performance and emission of two-stroke motorcycle. In: Simposium Kebangsaan Sains Matematik 2010 (SKSM2010), 8 - 10 Disember 2010, Johor Bahru, Johor. (Submitted)

Rashid, L.A and Alimin, Ahmad Jais and Hushim, Mohd Faisal AN OVERVIEW ON DURABILITY STUDY ON A RETROFIT FUEL INJECTION KIT DURING ON-ROAD TESTING. In: Postgraduate Seminar 2010, 29 & 30 November 2010, UTHM.

Kamarudin, Kamarul-Azhar and Mohamad Sazali, Nor Shahida Akma and Mohd Ali, Mas Fauzi and Alimin, Ahmad Jais and Abdullah Khir, Saffiah Performance of diesel engine using blended crude jatropha oil. In: 10th Asian International Conference On Fluid Machinery, 21-23 October 2009, Kuala Lumpur Malaysia.

Thesis

Khalid, Amir and Alimin, Ahmad Jais and Mustaffa, Norrizal (2014) Development of constant volume chamber and high injection pressure system for bio-diesel combustion. Other thesis, Universiti Tun Hussein Onn Malaysia.

Basharie, Siti Mariam and Mohamad Jaat, Md Norrizam and Khalid, Amir and Alimin, Ahmad Jais and Manshoor, Bukhari and Mohd Ali, Mas Fawzi and Salleh, Hamidon and Mohammad, Md Nor Anuar (2014) A new approach in exploration the air entrainment, endothermic and heat recovery process of biodiesel ignition. Other thesis, Universiti Tun Hussein Onn Malaysia.

Salleh, Hamidon and R. Ragavan, Vijay and Kenichi, Funazaki and Alimin, Ahmad Jais and Md Seri, Suzairin and Mohideen Batcha, Mohd Faizal and Atan, Siti Rohila (2013) Hydrodynamic and thermal characteristics study of cooling structure (IIC) for eco-gas turbine engine blade. Other thesis, Universiti Tun Hussein Onn Malaysia.

Amirnordin, Shahrin Hisham and Abd Rahman, Hamimah and Ainuddin @ Nordin, Ainun Rahmahwati and Alimin, Ahmad Jais and Mohd Ali, Mas Fawzi and Rahmat, Norwahdah and Triwahyono, Sugeng (2012) Porous ceramic/zeolite in engine exhaust treatment. Other thesis, Universiti Tun Hussein Onn Malaysia.

Amirnordin, Shahrin Hisham and Wan Salim, Wan Saiful-Islam and Mohideen Batcha, Mohd Faizal and Md Seri, Suzairin and Mohamad, Akmal Nizam and Alimin, Ahmad Jais and Rhagavan, Vijay R. (2010) Optimal flow parameters of louvered fin heat exchangers for automotive and air-conditioning applications. Other thesis, Universiti Tun Hussein Onn Malaysia.

This list was generated on Tue Dec 1 13:55:48 2020 +08.