Items where Author is "Ibrahim , Mohd Halim Irwan "

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Item Type | No Grouping
Number of items: 39.

Article

Masrol, Shaiful Rizal and Ibrahim , Mohd Halim Irwan and Adnan, Sharmiza and Talib, Mohd Rahmad and Lau , Lee Sian (2017) Effects of soda-anthraquinone pulping variables on the durian rind pulp and paper characteristics: a preliminary test. IOP Conference Series: Materials Science and Engineering, 226 (012175). pp. 1-10. ISSN 1757-899X

Masrol, Shaiful Rizal and Ibrahim , Mohd Halim Irwan and Adnan, Sharmiza and Sa’adon, Amir Mubarak and Sukarno, Khairil Ika and Yusoff, Mohd Fadrol Hisham (2017) Soda-anthraquinone durian (durio zibethinus murr.) rind linerboard and corrugated medium paper: a preliminary test. IOP Conference Series: Materials Science and Engineering, 226 (012174). pp. 1-10. ISSN 1757-899X

Masrol, Shaiful Rizal and Ibrahim, Mohd Halim Irwan and Adnan, Sharmiza and Ahmad Tajudin, Muhammad Syauqi Asyraf and Abdul Raub, Radhi and Abdul Razak, Siti Nurul Aqma and Md Zain, Siti Nur Faeza (2017) Effects of total chlorine free (TCF) bleaching on the characteristics of chemi mechanical (CMP) pulp and paper from Malaysian durian (DURIO ZIBETHINUS MURR.) rind. Jurnal Teknologi, 79 (4). pp. 55-64. ISSN 2180–3722

Ibrahim , Mohd Halim Irwan and Mohd Amin, Azriszul and Asmawi, Rosli and Mustafa, Najwa (2016) Influences of restaurantwaste fats and oils (RWFO) from grease trap as binder on rheological and solvent extraction behavior in SS316L metal injection molding. Metals, 6 (19).

Osman, Saliza Azlina and Kamarul Ariffin, C.M. and Kurniawan, Denni and Ibrahim , Mohd Halim Irwan (2015) Effect of cutting speed on bio-corrosion of AISI 316L stainless steel. ARPN Journal of Engineering and Applied Sciences, 11 (4). pp. 2496-2500. ISSN 18196608

Ahmad, Sufizar and Muhamad, N. and Muchtar, Andanastuti and Sahari, J. and Jamaludin, K. R. and Ibrahim , Mohd Halim Irwan and Mohamad Nor, N. H. (2014) Influence of composition and sintering temperature on density for pure and titanium alloy foams. Jurnal Teknologi, 68 (4). pp. 83-86. ISSN 2180-3722

Sa'ude, Nasuha and Ibrahim, Mustaffa and Ibrahim, Mohd Halim Irwan (2014) Melt flow behavior of metal filled in polymer matrix for fused deposition modeling (FDM) filament. Applied Mechanics and Materials , 660 . pp. 89-93. ISSN 1660-9336

Sa'ude, Nasuha and Ibrahim, Mustaffa and Ibrahim, Mohd Halim Irwan (2014) Melt flow behavior of polymer matrix extrusion for fused deposition modeling (FDM). Applied Mechanics and Materials , 660 . pp. 89-93. ISSN 1660-9336

Asmawi, Rosli and Ibrahim, Mohd Halim Irwan and Mohd Amin, Azriszul (2014) Mixing and characterisation of stainless steel 316L feedstock for waste polystyrene binder system in metal injection molding (MIM). Applied Mechanics and Materials Journal, 607 . pp. 83-86. ISSN 1660-9336

Mohd Amin, Azriszul and Ibrahim, Mohd Halim Irwan and Asmawi, Rosli (2014) Mixing homogeneity and rheological characterization for optimal binder formulation for metal injection moulding. Applied Mechanics and Materials , 607 . pp. 181-184. ISSN 1660-9336

Asmawi, Rosli and Ibrahim, Mohd Halim Irwan and Mohd Amin, Azriszul and Mustafa, N. and Alawi, N. (2014) Mixing study of aluminium waste as metal powder for waste polystyrene binder system in Metal Injection Molding (MIM). Applied Mechanics and Materials , 660 . pp. 239-243. ISSN 1660-9336

Ibrahim, Mohd Halim Irwan and Zainol, M. Z. R. and Othman, Mohd Hilmi and Mohd Amin, Azriszul and Asmawi, Rosli and Sa'ude, N. (2014) Optimisation of processing condition using Taguchi Method on strength of HDPE- natural fibres micro composite. Applied Mechanics and Materials, 660 . pp. 33-37. ISSN 1662-7482

Ibrahim, Mohd Halim Irwan and Manaf, M. H. A. and Othman, Mohd Hilmi and Mustafa, N. and Masrol, Shaiful Rizal and Rafai, Noor Hakim (2014) Optimisation of processing condition using Taguchi Method on warpage for HDPE- clay composite. Applied Mechanics and Materials , 660 . pp. 28-32. ISSN 1662-748

Ibrahim, Mohd Halim Irwan and Manaf, M. H. A. and Othman, Mohd Hilmi and Mustafa, N. and Masrol, Shaiful Rizal and Rafai, Noor Hakim (2014) Optimisation of processing condition using Taguchi Method on warpage for HDPE-clay composite. Applied Mechanics and Materials, 660 . pp. 28-32. ISSN 1662-7482

Masrol, Shaiful Rizal and Ibrahim, Mohd Halim Irwan and Adnan, Sharmiza and Amir Shah, M. S. S. and Main, Nor Mazlana and Esa, Mohd Faizal and Othman, Mohd Hilmi (2014) Soda anthraquinone pulping of oil palm male flower spikes. Applied Mechanics and Materials, 660 . pp. 373-377. ISSN 1662-7482

Mohd Amin, Azriszul and Ibrahim, Mohd Halim Irwan and Asmawi, Rosli and Mustapha, N. (2014) The influence of sewage fat composition on rheological behavior of metal injection moulding. Applied Mechanics and Materials, 660 . pp. 38-42. ISSN 1662-7482

Sa'ude, Nasuha and Isa, N.M.A. and Ibrahim , Mustaffa and Ibrahim, Mohd Halim Irwan (2014) A study on contact angle and surface tension on copper-ABS for FDM feedstock. Applied Mechanics and Materials , 607 . pp. 747-751. ISSN 1660-9336

Sa'ude, Nasuha and Ibrahim, Mustaffa and Ibrahim, Mohd Halim Irwan (2013) Mechanical properties of highly filled iron-ABS composites in injection molding for FDM wire filament. Materials Science Forum, 773 . pp. 448-453. ISSN 0255-5476

Conference or Workshop Item

Ibrahim, Mohd Halim Irwan and Abdul Razak, M.I. and Selamat, M.A. and Mustafa, N. (2015) Carbon-copper (C-Cu) composites using local carbon material through warm compaction process for potential electrical and electronic applications. In: International Engineering Research and Innovation Symposium 2015 (IRIS), 12–13 September 2015, Putrajaya, Malaysia.

Masrol, Shaiful Rizal and Ibrahim, Mohd Halim Irwan and Adnan, Sharmiza (2015) Chemi-mechanical pulping of durian rinds. In: 2nd International Materials, Industrial & Manufacturing Engineering Conference (MIMEC 2015), 4-6 February 2015, Bali Nusa Dua Convention Center, Bali, Indonesia.

Masrol, Shaiful Rizal and Ibrahim, Mohd Halim Irwan and Adnan, Sharmiza (2015) Effect of TCF bleaching process to the characteristics of chemi-mechanical pulping (CMP)durian rinds pulp and paper. In: 4th International Conference on Advanced Manufacturing Technology (ICAMT 2015), 20-22 September 2015, Johor Bahru, Malaysia.

Sa'ude, Nasuha and Ibrahim, Mustaffa and Ibrahim, Mohd Halim Irwan and Mohd Amin, Azriszul (2015) Layered manufacturing (LM) of PMC filament by fused deposition modeling (FDM). In: 4th International Conference on Advanced Manufacturing Technology (ICAMT 2015), 20-22 September 2015, Johor Bahru, Malaysia.

Ibrahim, Mohd Halim Irwan and Mustafa, N. and Mohd Amin, Azriszul and Asmawi, Rosli (2015) Mechanical properties of SS316L and natural hydroxyapatite composite in metal injection molding. In: International Engineering Research and Innovation Symposium 2015 (IRIS), 12–13 September 2015, Putrajaya, Malaysia.

Ibrahim, Mohd Halim Irwan and Mustafa, N. and Mohd Amin, Azriszul and Asmawi, Rosli (2015) Processability study of natural hydroxyapatite and SS316L via metal injection molding. In: 2015 International Symposium on Technology Management and Emerging Technologies (ISTMET), 25-27 August 2015, Langkawi, Kedah, Malaysia.

Mohd Amin, Azriszul and Ibrahim, Mohd Halim Irwan and Asmawi, Rosli and Mustafa, N. and Sa'ude, Nasuha (2015) Solvent and thermal debinding of water atomised SS316L green compact with FOG derivatives as binder in MIM. In: 4th International Conference on Advanced Manufacturing Technology (ICAMT 2015), 20-22 September 2015, Johor Bahru, Malaysia.

Ibrahim, Mohd Halim Irwan and Mohd Amin, Azriszul and Wahab, Md Saidin and Asmawi, Rosli and Mustafa, N. (2015) Solvent debinding variables on leaching fat, oil and grease (FOG) derivatives of green part stainless steel SS316L metal injection moulding. In: 2015 International Symposium on Technology Management and Emerging Technologies (ISTMET), 25-27 August 2015, Langkawi, Kedah, Malaysia.

Ibrahim, Mohd Halim Irwan and Said, M. N. and Asmawi, Rosli (2014) Characterization of carbon brush from coconut shell for railway application. In: International Integrated Engineering Summit (IIES 2014), 1-4 December 2014, Universiti Tun Hussein Onn Malaysia, Johor.

Osman, Saliza Azlina and Ourdjini, Ali and Ibrahim, Mohd Halim Irwan and Yusof, Mohd Sallehuddin (2014) Comparison between SAC405 lead-free solders and EN(P)EPIG and EN(B)EPIG surface finishes. In: International Integrated Engineering Summit (IIES 2014), 1-4 December 2014, Universiti Tun Hussein Onn Malaysia, Johor.

Masrol, Shaiful Rizal and Ibrahim, Mohd Halim Irwan and Adnan, Sharmiza and Amir Shah, Muhammad Safiuddin Syah and Main, Nor Mazlana and Esa, Mohd Faizal and Othman, Mohd Hilmi (2014) Effect of beating process to soda anthraquinone pulp of oil palm male flower spikes fibre. In: International Integrated Engineering Summit (IIES 2014), 1-4 December 2014, Universiti Tun Hussein Onn Malaysia, Johor.

Rahman, M. H. and Yusof, Mohd Sallehuddin and Ibrahim, Mohd Halim Irwan and Osman, Saliza Azlina (2014) Feasibility study: investigation of polymer nano-composites (PNC) material for biomedical application via fused deposition modelling (FDM) routes. In: International Integrated Engineering Summit (IIES 2014), 1-4 December 2014, Universiti Tun Hussein Onn Malaysia, Johor.

Mohd Amin, Azriszul and Ibrahim, Mohd Halim Irwan and Asmawi, Rosli and Mustapha, N. and Hashim, Mohd Yussni (2014) Green density optimisation with sustainable sewage fat as binder components in ss316l feedstock of metal injection moulding process(MIM) by taguchi method. In: International Integrated Engineering Summit (IIES 2014), 1-4 December 2014, Universiti Tun Hussein Onn Malaysia, Johor.

Mustafa, N. and Ibrahim, Mohd Halim Irwan and Asmawi, Rosli and Mohd Amin, Azriszul and Masrol, Shaiful Rizal (2014) Green strength optimization in metal injection molding applicable with a taguchi method L9 (3). In: International Integrated Engineering Summit (IIES 2014), 1-4 December 2014, Universiti Tun Hussein Onn Malaysia, Johor.

Mustafa, N. and Ibrahim, Mohd Halim Irwan and Asmawi, Rosli and Mohd Amin, Azriszul (2014) Hydroxyapatite extracted from waste fish bones and scales via calcination method. In: International Integrated Engineering Summit (IIES 2014), 1-4 December 2014, Universiti Tun Hussein Onn Malaysia, Johor.

Sa'ude, Nasuha and Kamarudin, Khairu and Ibrahim, Mustaffa and Ibrahim, Mohd Halim Irwan (2014) Melt flow index of recycle abs for fused deposition modeling (FDM) filament. In: International Integrated Engineering Summit (IIES 2014), 1-4 December 2014, Universiti Tun Hussein Onn Malaysia, Johor.

Asmawi, Rosli and Ibrahim , Mohd Halim Irwan and Amin, A. M. and Sopyan, Iis (2014) Synthesis and characterization of nanocrystalline hydroxyapatite powder. In: International Conference on X-Ray & Related Technique in Research and Industry (ICXRI2014), 11-13 August 2014 , Johor Bahru, Johor.

Jamaludin, Khairur Rijal and Muhamad, Norhamidi and Ab. Rahman, Mohd Nizam and M. Amin, Sri Yulis and Ahmad, Sufizar and Ibrahim , Mohd Halim Irwan and Murtadhahadi, Murtadhahadi and Mohamad Nor, Nor Hafiez (2009) Moulding parameter optimisation for the best sintered density. In: Proceedings of the World Congress on Engineering 2009, 1-3 July 2009, London.

Thesis

Ibrahim , Mohd Halim Irwan (2013) Characterization of waste polyethylene terephthalate (PET) as a sustainable binder for the application of green metal injection molding. Other thesis, Universiti Tun Hussein Onn Malaysia.

Ibrahim , Mohd Halim Irwan (2012) Kebolehacuanan suntikan logam mikro SS 316L menggunakan bahan pengikat PEG dan PMMA. PhD thesis, Universiti Kebangsaan Malaysia.

Ibrahim , Mohd Halim Irwan (2005) The effect of buckling in FRP members. Masters thesis, Universiti Teknologi Malaysia.

This list was generated on Sat Nov 25 00:59:32 2017 MYT.