Items where Author is "Lajis, Mohd Amri"
 | Up a level |
Article
Supawi, Aiman and Ahmad, Said and Talib, Norfazillah and Lee Woon Kiow, Lee Woon Kiow and Ho Fu Haw, Ho Fu Haw and Lajis, Mohd Amri (2024) Electrode Wear Rate of RBD Palm Oil as Dielectric Fluids on Electrical Discharge Machining (EDM) at Different Peak Current and Pulse Duration of Titanium Alloys. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 112 (2). pp. 54-63. ISSN 2289-7879
Ikhwan Shah Tisadi Tukiat, Ikhwan Shah Tisadi Tukiat and Yusuf, Nur Kamilah and Khaireez, Haikal and Sami Al-Alimi, Sami Al-Alimi and Lajis, Mohd Amri and Shamsudin, Shazarel and Ruhaizat, Nasha Emieza (2024) Microstructure and Mechanical Properties of Magnesium ZRE1 (Mg-Zn-Zr) Alloy with Rare Earth Element (Samarium) Addition. International Journal of Technology, 15 (1). pp. 49-62.
M. Altharan, Yahya and Shamsudin, Shazarel and Lajis, Mohd Amri and Sami Al-Alimi, Sami Al-Alimi and Yusuf, Nur Kamilah Y and Mohammed Alduais, Nayef Abdulwahab and Atef M. Ghaleb, Atef M. Ghaleb and Wenbin Zhou, Wenbin Zhou (2024) Optimizing strength of directly recycled aluminum chip-based parts through a hybrid RSM-GA-ANN approach in sustainable hot forging. Optimizing strength of directly recycled aluminum chip-based parts through a hybrid RSM-GA-ANN approach. pp. 1-29.
M. Altharan, Yahya and Shamsudin, Shazarel and Lajis, Mohd Amri and Al-Alimi, Sami and Yusuf, Nur Kamilah and M. Ghaleb, Atef and Zhou, Wenbin (2024) Optimizing strength of directly recycled aluminum chip-based parts through a hybrid RSM-GA-ANN approach in sustainable hot forging. RESEARCH ARTICLE. pp. 1-29.
Al-Alimia, Sami and Lajis, Mohd Amri and Shamsudin, Shazarel and Yusuf, Nur Kamilah and Boon, Loong Chan and Didane, Djamal Hissein and H. Rady, Mohammed and M. Sabbar, Huda and S. Msebawi, Munthader (2021) Development of Hot Equal Channel Angular Processing (ECAP) consolidation technique in the production of Boron Carbide(B4C)-Reinforced Aluminium Chip (AA6061)-based composite. Int. Journal of Renewable Energy Development (IJRED), 10 (3). pp. 607-621. ISSN 2252-4940
Al-Alimi, Sami and Lajis, Mohd Amri and Shamsudin, Shazarel and Yusuf, Nur Kamilah and Chan, B. L. and Hissein, Didane Djamal and H. Rady, Mohammed and Msebawi, Muntadher Sabah and Sabbar, Huda Mohammed (2021) Hot extrusion followed by a hot ecap consolidation combined technique in the production of Boron Carbide (B4C) reinforced with aluminium chips (AA6061) composite. Materials and technology, 55. pp. 347-354. ISSN 1582-2949
Al-Alimi, Sami and Lajis, Mohd Amri and Shamsudin, Shazarel and Chan, B.L. and Mohammed, Yahya and Ismail, Al Emran and Sultan, N. M. (2020) Development of metal matrix composites and related forming techniques by direct recycling of light metals: a review. International Journal of Integrated Engineering, 12 (1). pp. 144-171. ISSN 2600-7916
Rady, Mohammed Hussien and Mustapa, Mohammad Sukri and Wagiman, Abdullah and Shamsudin, Shazarel and Lajis, Mohd Amri and Sami Al Alimi2, Sami Al Alimi2 and Mansor, Mohamad Norani and Harimon, Mohd Azhar (2020) Effect of the heat treatment on mechanical and physical properties of direct recycled aluminium alloy (AA6061). International Journal of Integrated Engineering, 12 (3). pp. 82-89. ISSN 2229-838X
Abbas, Mohammed Abdulridha and Lajis, Mohd Amri and Abdul Ridha, Ghassan Shaker (2019) A new methodology for predicting quantity of agglomeration between electrodes in PMEDM environment. International Journal of Mechanical Engineering and Technology (IJMET), 10 (2). pp. 1461-1480. ISSN 0976-6340
Ahmad, Azlan and Lajis, Mohd Amri and Shamsudin, Shazarel and Yusuf, Nur Kamilah (2018) Conjectured the behaviour of a recycled metal matrix composite (mmc–alr) developed through hot press forging by means of 3d fem simulation. materials, 11 (6). pp. 1-14. ISSN 1996-1944
Ahmad, Said and Lajis, Mohd Amri and Abdul Haq, Reazul Haq and Tajul Arifin, Ahmad Mubarak and Abdol Rahman, Mohd Nasrull and Ho, Fu Haw and Abdullah, Haslina and Hassan, Mohd Fahrul (2018) Surface roughness and surface topography of inconel 718 in powder mixed dielectric electrical discharge machining (PMEDM). International Journal of Integrated Engineering: Special issue 2018: Mechanical Engineering, 10 (5). pp. 181-186. ISSN 2229-838X
Yusuf, Nur Kamilah and Lajis, Mohd Amri and Ahmad, Azlan (2017) Hot press as a sustainable direct recycling technique of aluminium: mechanical properties and surface integrity. Materials, 10 (902). pp. 1-18. ISSN 1996-1944
Yusuf, Nur Kamilah and Lajis, Mohd Amri and Daud, M.I. and Noh, Mohamad Zaky (2014) Effect of operating temperature on direct recycling aluminium chips (AA6061) in hot press forging process. Advanced Materials Research, 315 (NIL). pp. 728-732. ISSN 1022-6680
Lajis, Mohd Amri and Khamis, Siti Salwa and Yusuf, Nur Kamilah (2014) Optimization of hot press forging parameters in direct recycling of aluminium chip (AA 6061). Key Engineering Materials, 622 (NIL). pp. 223-230. ISSN 1013-9826
Turnad, L. Ginta and A.K., M. Nurul Amin and Lajis, Mohd Amri and A.N., Mustafizul Karim and H.C.D., Mohd Radzi (2009) Improved tool life in end milling Ti-6Al-4V through workpiece preheating. European Journal of Scientific Research, 27 (3). pp. 384-391. ISSN 1450-216X
Turnad, L. Ginta and A.K., M. Nurul Amin and H.C.D., Mohd Radzi and Lajis, Mohd Amri (2009) Tool life prediction by response surface methodology in end milling titanium alloy Ti-6Al-4V using uncoated WC-Co inserts. European Journal of Scientific Research, 28 (4). pp. 533-541. ISSN 1450-216X
Lajis, Mohd Amri and Mohd Radzi, H.C.D. and Nurul Amin, A.K.M. (2009) The implementation of Taguchi method on EDM process of tungsten carbide. European Journal of Scientific Research, 26 (4). pp. 611-619. ISSN 1450-216X