Items where Author is "Mohd Ali, Mas Fawzi "

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Item Type | No Grouping
Number of items: 25.

Article

Ismail, Muammar Mukhsin and Zulkifli, Abd Fathul Hakim and Mohd Ali, Mas Fawzi and Osman, Shahrul Azmir (2016) Conversion method of a diesel engine to a CNG-diesel dual fuel engine and its financial savings. ARPN Journal of Engineering and Applied Sciences, 11 (8). ISSN 18196608

Khalid, Amir and Anuar, M. D. and Sapit, Azwan and Razali, Mohd Azahari and Manshoor, Bukhari and Mohd Ali, Mas Fawzi and Zaman @ Bujang, Izzuddin (2014) Experimental investigation of emissions characteristics of small diesel engine fuelled by blended crude palm oil. Applied Mechanics and Materials, 660 . pp. 462-467. ISSN 1662-7482

Razali, Mohd Azahari and Sapit, Azwan and Mohd Ali, Mas Fawzi and Khalid , Amir and Mohammed, Akmal Nizam (2014) Measurement of thermophoretic velocity in surrounding gas of nitrogen or carbon dioxide. Applied Mechanics and Materials, 554 . pp. 686-690. ISSN 1662-7482

Mohd Ali, Mas Fawzi and Hashim, Mohd Norfaiz and Zulkifli, Abd Fathul Hakim and Amirnordin, Shahrin Hisham (2014) Optimizing the ignition timing of a converted CNG mono-gas engine. Applied Mechanics and Materials, 554 . pp. 474-478. ISSN 16627482

Mohd Ali, Mas Fawzi and Kidoguchi, Yoshiyuki and Nada, Yuzuru (2013) Effect of gas-jet ignition technique on the extension of CNG lean combustion limit. Applied Mechanics and Materials , 315 (2013). pp. 288-292. ISSN 1660-9336

Khalid , Amir and Mohamad Jaat, Md Norrizam and Zaman, Izzuddin and Manshoor, Bukhari and Mohd Ali, Mas Fawzi (2013) Effect of pilot injection on mixture formation, ignition process and flame development in diesel combustion. Applied Mechanics and Materials , 390 . pp. 327-332.

Khalid , Amir and Mohamad Jaat, Md Norrizam and Zaman, Izzuddin and Manshoor, Bukhari and Mohd Ali, Mas Fawzi (2013) Effect of preheated fuel on mixture formation of biodiesel spray. Applied Mechanics and Materials , 393 . pp. 493-498.

Conference or Workshop Item

Mohmad Ja'at @ Mohd Noh, Md Norrizam and Khalid, Amir and Sapit, Azwan and Adibah, Adibah and Basharie, Siti Mariam and Mohd Ali, Mas Fawzi (2015) The influences of injection pressure and ambient temperature on ignition delay and emission. In: International Engineering Research and Innovation Symposium 2015 (IRIS), 12–13 September 2015, Putrajaya, Malaysia.

Mohd Ali, Mas Fawzi and Mustaffa, Norrizal and Hushim, Mohd Faisal and Osman, Shahrul Azmir (2014) Application of injector-volume ratio values in the development of a fuel injection controller. In: International Integrated Engineering Summit (IIES 2014), 1-4 December 2014, Universiti Tun Hussein Onn Malaysia, Johor.

Amirnordin, Shahrin Hisham and Ismail, Salwani and Yii, RONNY, Shi Chin and Mansor, Norani and Mohd Ali, Mas Fawzi and Khalid, Amir (2014) Effects of nozzle diameter on the spray characteristics of premix injector in burner system. In: International Integrated Engineering Summit (IIES 2014), 1-4 December 2014, Universiti Tun Hussein Onn Malaysia, Johor.

Madon, Rais Hanizam and M. Zamree, Muhammad Afiq and Amirnordin, Shahrin Hisham and Mohd Ali, Mas Fawzi (2014) Heating and cooling of an aluminium-cased parallel flow microreactor for steam-methane reforming. In: International Integrated Engineering Summit (IIES 2014), 1-4 December 2014, Universiti Tun Hussein Onn Malaysia, Johor.

Abdullah, Mohammad Kamil and Firdauz, Amon and Mohd Ali, Mas Fawzi (2014) Parametric study on geometrical arrangement of sister hole. In: International Integrated Engineering Summit (IIES 2014), 1-4 December 2014, Universiti Tun Hussein Onn Malaysia, Johor.

Zulkifli, Fathul Hakim and Mohd Ali, Mas Fawzi and Osman, Shahrul Azmir (2014) A review on knock phenomena in CNG-diesel dual fuel system. In: International Integrated Engineering Summit (IIES 2014), 1-4 December 2014, Universiti Tun Hussein Onn Malaysia, Johor.

Khalid , Amir and Tamaldin, N. and Jaat, M. and Mohd Ali, Mas Fawzi and Mansoor, Bukhari and Zaman, Izzuddin (2013) Impacts of biodiesel storage duration on fuel properties and emissions. In: MITC 2013 : Malaysian International Tribology Conference 2013, 18- 20 November 2013, Kota Kinabalu, Sabah, Malaysia .

Hushim, Mohd Faisal and Alimin, Ahmad Jais and Mohideen Batcha, Mohd Faizal and Mohd Ali, Mas Fawzi and Abdul Rashid, Lukman (2011) Port-fuel injection system for small 4-stroke single cylinder engine: an experimental framework. In: 2nd International Conference on Mechanical and Manufacturing Engineering (ICME 2011), 6th-7th June 2011, Putrajaya International Convention Centre, Putrajaya.

Amirnordin, Shahrin Hisham and Abd Rahman, Hamimah and Md Nor, Nor Azmah and Ahmad Hudin, Ahmad Sobri and Rahmat, Norwahdah and Mohd Ali, Mas Fawzi and Alimin, Ahmad Jais and Mohideen Batcha, Mohd Faizal and Wan Salim, Wan Saiful-Islam and Md Seri, Suzairin (2010) Pressure drop characteristic of alumina-zeolite porous Ceramic Filter and Its Effects in Engine Performance. In: The 2nd International Conference on Engineering and ICT (iCEi) 2010. , 18-20 February, 2010, Melaka.

Amirnordin, Shahrin Hisham and Abd Rahman, Hamimah and Ahmad Hudin, Ahmad Sobri and Rahmat, Norwahdah and Mohd Ali, Mas Fawzi and Md Seri, Suzairin and Alimin, Ahmad Jais and Mohideen Batcha, Mohd Faizal and Wan Salim, Wan Saiful-Islam (2009) Effects of alumina foam coated with stanum (IV) oxide on the emission of gasoline engine. In: 2nd International Conference on Engineering Technology 2009 (ICET 2009), 8-10, December 2009, Kuala Lumpur.

Wong, Jiung and Mohd Ali, Mas Fawzi and Mohamad, Mahmod Abd Hakim and Mohamad, Akmal Nizam (2009) Heat dissipation analysis of UTHM chassis dynamometer. In: Malaysian Technical Universities Conference on Engineering and Technology (MUCEET 2009), 20-22 June 2009, Kuantan, Pahang.

Amirnordin, Shahrin Hisham and Abd Rahman, Hamimah and Ahmad Hudin, Ahmad Sobri and Rahmat, Norwahdah and Mohd Ali, Mas Fawzi and Alimin, Ahmad Jais and Mohideen Batcha, Mohd Faizal and Wan Salim, Wan Saiful-Islam (2009) Porous alumina-zeolite as a hydrocarbon trap in SI engine. In: 4th International Conference on Recent Advances in Materials, Minerals and Environment and 2nd Symposium on Materials and Processing 2009, 1-3 June, 2009, Penang.

Mohd Taib, Mohsein and Alimin, Ahmad Jais and Amirnordin, Shahrin Hisham and Abd Rahman, Hamimah and Mohd Ali, Mas Fawzi (2009) Reduction of Soot Emission from Diesel Fuel Engine Using a Novel Diesel Particulate Filter. In: International Conference on Advances in Designs and Mechanical Engineering (ICADME) 2009., 11-13, October 2009, Universiti Malaysia Perlis, Kangar.

Abdul Ghafir, Mohammad Fahmi and Hasnan, Khalid and Khalid , Amir and Mohd Ali, Mas Fawzi (2007) Cub prix experience: a case study on implementation of POPBL in UTHM. In: 2nd Regional Conference on Engineering Education (RCEE 2007), 3-5 December 2007, Johor Bahru.

Thesis

Basharie, Siti Mariam and Mohamad Jaat, Md Norrizam and Khalid , Amir and Alimin, Ahmad Jais and Manshoor, Bukhari and Mohd Ali, Mas Fawzi and Salleh, Hamidon and Mohammad, Md Nor Anuar (2014) A new approach in exploration the air entrainment, endothermic and heat recovery process of biodiesel ignition. Other thesis, Universiti Tun Hussein Onn Malaysia.

Amirnordin, Shahrin Hisham and Abd. Rahman, Hamimah and Ainuddin @ Nordin, Ainun Rahmahwati and Alimin, Ahmad Jais and Mohd Ali, Mas Fawzi and Rahmat, Norwahdah and Triwahyono, Sugeng (2012) Porous ceramic/zeolite in engine exhaust treatment. Other thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Ali, Mas Fawzi (2012) Research on control of ignition and THC formation in CNG engines by the application of gas-jet direct-ignition technique. PhD thesis, University of Tokushima.

Mohd Ali, Mas Fawzi (2007) Development of a direct fuel injector for a two-stroke gasoline engine. Masters thesis, Universiti Teknologi Malaysia.

This list was generated on Fri Sep 22 13:29:18 2017 MYT.