Items where Author is "Salleh, Hamidon"

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Item Type | No Grouping
Number of items: 17.

Article

Noranai, Zamri and Mohamad, Mohd. Hafiz Haidar and Salleh, Hamidon and Md Yusof, Mohammad Zainal (2014) Energy saving measures for university public library: a case study of UTHM Library. Applied Mechanics and Materials, 660 . pp. 1072-1075. ISSN 1662-7482

Md Seri, Suzairin and Abdul Karim, Zainal Ambri and Salleh, Hamidon and Mohideen Batcha, Mohd Faizal and R. Raghavan, Vijay (2014) Hydrodynamic characteristics of flow around tube bank with integral wake splitter. Applied Mechanics and Materials, 660 . pp. 649-653. ISSN 1662-7482

Khalid , Amir and Amirnordin, Shahrin Hisham and Lambosi, Latip and Manshoor, Bukhari and Sies, Mohamad Farid and Salleh, Hamidon (2014) Spray characteristic of diesel-water injector for burner system. Advanced Materials Research, 845 . ISSN 1662-8985

Sies, Mohamad Farid and Mustaffa, Norrizal and Zakaria, Hanis and Salleh, Hamidon and Manshoor, Bukhari and Khalid , Amir (2014) A review of the concept of fuel-water internally rapid mixing injector in burner system. Applied Mechanics and Materials , 465 . pp. 296-301. ISSN 1660-9336

Takahashi, Toshihiko and Funazaki, Ken-ichi and Salleh, Hamidon and Sakai, Eiji and Watanabe, Kazunori (2011) Assessment of URANS and DES for prediction of leading edge film cooling. Journal of Turbomachinery .

Conference or Workshop Item

Salleh, Hamidon and Yee, Jingzu and Azahari, Razali (2014) Experimental study on film cooling effectiveness of shallow hole with upstream sister holes. In: International Integrated Engineering Summit (IIES 2014), 1-4 December 2014, Universiti Tun Hussein Onn Malaysia, Johor.

Md Yazid, Muhammad Haziq and Salleh, Hamidon and Azahari, Razali (2014) An experiment investigation of film cooling effectivenes of sister hole of cylindrical shaped hole film cooling geometry on a flat plate surface. In: International Integrated Engineering Summit (IIES 2014), 1-4 December 2014, Universiti Tun Hussein Onn Malaysia, Johor.

Mohammed Alakashi, Abobaker and Salleh, Hamidon and Basuno, Bambang (2013) The implementation of cell-centred finite volume method over five nozzle models. In: 3rd International Conference on Advanced in Mechanical Engineering (ICAME2013) , 27-29 August 2013, Melaka, Malaysia .

Hushim, Mohd Faisal and Alimin, Ahmad Jais and Mohammad, Md Nor Anuar and Madon, Rais Hanizam and Osman, Shahrul Azmir and Amirnordin, Shahrin Hisham and Salleh, Hamidon and Mohideen Batcha, Mohd Faizal (2011) Application of green technologies for UTHM in realizing the green campus concept. In: 2nd International Conference on Mechanical and Manufacturing Engineering (ICME 2011), 6th-7th June 2011, Putrajaya International Convention Centre, Putrajaya.

Hushim, Mohd Faisal and Osman, Shahrul Azmir and Alimin, Ahmad Jais and Mohamad, Akmal Nizam and Mustafa, Norrizal and Md Seri, Suzairin and Amirnordin, Shahrin Hisham and Wan Salim, Wan Saiful-Islam and Salleh, Hamidon and Azlan, Mohd Azwir (2011) Perodua Eco-Challenge 2010: ideas of modification from ARG UTHM. In: 2nd International Conference on Mechanical and Manufacturing Engineering (ICME 2011), 6th-7th June 2011, Putrajaya International Convention Centre, Putrajaya.

Noranai, Zamri and Salleh, Hamidon and Md Yusof, Mohammad Zainal (2011) Energy cost reduction by partially operation of thermal energy storage based on building load profile. In: International Conference on Environment Science and Engineering (ICESE 2011), 1-3, April 2011, Bali Island, Indonesia.

Taib, Ishkrizat and Osman, Kahar and Amirnordin, Shahrin Hisham and Salleh, Hamidon (2010) Flow analysis on fusiform aneurysm during exercise condition. In: Malaysian Technical Universities Conference on Engineering and Technology (MUCET) 2010. , 28 - 29 June, 2010, Melaka.

Mohideen Batcha, Mohd Faizal and Salleh, Hamidon and Raghavan, Vijay R. Studies on biomass drying apparatus using swirling fluidization technique. In: The 3rd Malaysian Technical Universities Conference on Engineering and Technology (MUCEET2009), 20-22 June 2009, Kuantan, Pahang.

Mohideen Batcha, Mohd Faizal and Salleh, Hamidon and Raghavan, Vijay R. Studies on biomass drying apparatus using swirling fluidization technique. In: The 3rd Malaysian Technical Universities Conference on Engineering and Technology (MUCEET2009), 20-22 June 2009, Kuantan, Pahang.

Thesis

Manshoor, Bukhari and Salleh, Hamidon and Khalid, Amir and Abdullah, Aslam and Zakaria, Hanis and Othman, Mohd Fahmi (2014) A new approach in determine of the coefficient of variation (COV) for internal rapid mixing using a space filling circle grid fractal for improving a combustion burning limits. Other thesis, Universiti Tun Hussein Onn Malaysia.

Basharie, Siti Mariam and Mohamad Jaat, Md Norrizam and Khalid , Amir and Alimin, Ahmad Jais and Manshoor, Bukhari and Mohd Ali, Mas Fawzi and Salleh, Hamidon and Mohammad, Md Nor Anuar (2014) A new approach in exploration the air entrainment, endothermic and heat recovery process of biodiesel ignition. Other thesis, Universiti Tun Hussein Onn Malaysia.

Salleh, Hamidon and R. Ragavan, Vijay and Kenichi, Funazaki and Alimin, Ahmad Jais and Md Seri, Suzairin and Mohideen Batcha, Mohd Faizal and Atan, Siti Rohila (2013) Hydrodynamic and thermal characteristics study of cooling structure (IIC) for eco-gas turbine engine blade. Other thesis, Universiti Tun Hussein Onn Malaysia.

This list was generated on Fri Nov 24 08:06:11 2017 MYT.