Items where Author is "Shamsudin, Shazarel"

Article

Wagiman, Abdullah and Mustapa, Mohammad Sukri and Lajis, Mohd Amri and Shamsudin, Shazarel and Mohamad, Mahmod Abd Hakim and Rady, Mohammed Hussien (2024) Influence of Process Variables on The Density of Aluminium Chip-Base Feedstock Prepared for Non-Melted Hot Extrusion Recycling. Journal of Advanced Research in Applied Sciences and Engineering Technology, 33 (2). pp. 351-359. ISSN 2462-1943

Ikhwan Shah Tisadi Tukiat, Ikhwan Shah Tisadi Tukiat and Yusuf, Nur Kamilah and Khaireez, Haikal and Sami Al-Alimi, Sami Al-Alimi and Lajis, Mohd Amri and Shamsudin, Shazarel and Ruhaizat, Nasha Emieza (2024) Microstructure and Mechanical Properties of Magnesium ZRE1 (Mg-Zn-Zr) Alloy with Rare Earth Element (Samarium) Addition. International Journal of Technology, 15 (1). pp. 49-62.

M. Altharan, Yahya and Shamsudin, Shazarel and Lajis, Mohd Amri and Sami Al-Alimi, Sami Al-Alimi and Yusuf, Nur Kamilah Y and Mohammed Alduais, Nayef Abdulwahab and Atef M. Ghaleb, Atef M. Ghaleb and Wenbin Zhou, Wenbin Zhou (2024) Optimizing strength of directly recycled aluminum chip-based parts through a hybrid RSM-GA-ANN approach in sustainable hot forging. Optimizing strength of directly recycled aluminum chip-based parts through a hybrid RSM-GA-ANN approach. pp. 1-29.

M. Altharan, Yahya and Shamsudin, Shazarel and Lajis, Mohd Amri and Al-Alimi, Sami and Yusuf, Nur Kamilah and M. Ghaleb, Atef and Zhou, Wenbin (2024) Optimizing strength of directly recycled aluminum chip-based parts through a hybrid RSM-GA-ANN approach in sustainable hot forging. RESEARCH ARTICLE. pp. 1-29.

Al-Alimi, Sami. and Lajis, Mohd. Amri. and Shamsudin, Shazarel and Yusuf, Nur Kamilah and Altharan, Yahya and Didane, Djamal Hissein and Saif, Yazid and Sadeq, Safwan and M. Sabbar, Huda and S. Msebawi, Muntadher (2023) Effects of Preheating Temperature on Deformed AA6061 Aluminium Properties of Hot Equal Channel Angular Pressing (ECAP) by Using Deform-3D Software. Arabian Journal for Science and Engineering. pp. 1-9.

Al-Alimi, Sami and Lajis, Mohd. Amri and Shamsudin, Shazarel and Yusuf, Nur Kamilah and Altharan, Yahya and Djamal Hissein Didane, Djamal Hissein Didane and Saif, Yazid and Sadeq, Safwan and M. Sabbar, Huda and S. Msebawi, Muntadher (2023) Effects of Preheating Temperature on Deformed AA6061 Aluminium Properties of Hot Equal Channel Angular Pressing (ECAP) by Using Deform-3D Software. Arabian Journal for Science and Engineering. pp. 1-9.

Sami. Al-Alimi, Sami. Al-Alimi and Lajis, Mohd. Amri and Shamsudin, Shazarel and Yusuf, Nur Kamilah and Altharan, Yahya and Djamal Hissein Didane, Djamal Hissein Didane and Saif, Yazid and Safwan Sadeq, Safwan Sadeq and M. Sabbar, Huda and Muntadher S. Msebawi, Muntadher S. Msebawi (2023) Effects of Preheating Temperature on Deformed AA6061 Aluminium Properties of Hot Equal Channel Angular Pressing (ECAP) by Using Deform-3D Software. Arabian Journal for Science and Engineering. pp. 1-9.

Sami. Al-Alimi, Sami. Al-Alimi and Lajis, Mohd. Amri and Shamsudin, Shazarel and Yusuf, Nur Kamilah and Altharan, Yahya and Djamal Hissein Didane, Djamal Hissein Didane and Saif, Yazid and Sadeq, Safwan and M. Sabbar, Huda and S. Msebawi, Muntadher (2023) Effects of Preheating Temperature on Deformed AA6061 Aluminium Properties of Hot Equal Channel Angular Pressing (ECAP) by Using Deform-3D Software. Arabian Journal for Science and Engineering. pp. 1-9.

Al-Alimi, Sami. and Lajis, Mohd. Amri. and Shamsudin, Shazarel and Yusuf, Nur Kamilah and Altharan, Yahya and Didane, Djamal Hissein and Saif, Yazid and Sadeq, Safwan and M. Sabbar, Huda and S. Msebawi, Muntadher (2023) Effects of Preheating Temperature on Deformed AA6061 Aluminium,Properties of Hot Equal Channel Angular Pressing (ECAP) by Using Deform-3D Software. Arabian Journal for Science and Engineering. pp. 1-9.

Al-Alimi, Sami and Lajis, Mohd. Amri and Shamsudin, Shazarel and Yusuf, Nur Kamilah and Altharan, Yahya and Didane, Djamal Hissein and Saif, Yazid and Sadeq, Safwan and M. Sabbar, Huda and S. Msebawi, Muntadher (2022) Effects of Preheating Temperature on Deformed AA6061 Aluminium Properties of Hot Equal Channel Angular Pressing (ECAP) by Using Deform-3D Software. Arabian Journal for Science and Engineering. pp. 1-9.

Al-Alimi, Sami and Lajis, Mohd. Amri. and Shamsudin, Shazarel and Yusuf, Nur Kamilah and Altharan, Yahya and Didane, Djamal Hissein and Saif, Yazid and Sadeq, Safwan and M. Sabbar, Huda and S. Msebawi, Muntadher (2022) Effects of Preheating Temperature on Deformed AA6061 Aluminium Properties of Hot Equal Channel Angular Pressing (ECAP) by Using Deform-3D Software. Arabian Journal for Science and Engineering. pp. 1-9.

Al-Alim, Sami. and Lajis, Mohd. Amri and Shamsudin, Shazarel and Yusu, Nur Kamilah and Altharan, Yahya and Didane, Djamal Hissein and Sai, Yazid and Sadeq, Safwan and M. Sabbar, Huda and S. Msebawi, Muntadher (2022) Effects of Preheating Temperature on Deformed AA6061 Aluminium Properties of Hot Equal Channel Angular Pressing (ECAP) by Using Deform-3D Software. Arabian Journal for Science and Engineering. pp. 1-9. ISSN 3381–3389

Sami. Al-Alimi, Sami. Al-Alimi and Mohd. Amri. Lajis, Mohd. Amri. Lajis and Shamsudin, Shazarel and Yusuf, Nur Kamilah and Yahya Altharan, Yahya Altharan and Djamal Hissein Didane, Djamal Hissein Didane and Saif, Yazid and Sadeq, Safwan and M. Sabbar, Huda and S. Msebawi, Muntadher i (2022) Effects of Preheating Temperature on Deformed AA6061 Aluminium Properties of Hot Equal Channel Angular Pressing (ECAP) by Using Deform-3D Software. Arabian Journal for Science and Engineering. pp. 1-9.

Al-Alimia, Sami and Lajis, Mohd Amri and Shamsudin, Shazarel and Yusuf, Nur Kamilah and Boon, Loong Chan and Didane, Djamal Hissein and H. Rady, Mohammed and M. Sabbar, Huda and S. Msebawi, Munthader (2021) Development of Hot Equal Channel Angular Processing (ECAP) consolidation technique in the production of Boron Carbide(B4C)-Reinforced Aluminium Chip (AA6061)-based composite. Int. Journal of Renewable Energy Development (IJRED), 10 (3). pp. 607-621. ISSN 2252-4940

Al-Alimi, Sami and Lajis, Mohd Amri and Shamsudin, Shazarel and Yusuf, Nur Kamilah and Chan, B. L. and Hissein, Didane Djamal and H. Rady, Mohammed and Msebawi, Muntadher Sabah and Sabbar, Huda Mohammed (2021) Hot extrusion followed by a hot ecap consolidation combined technique in the production of Boron Carbide (B4C) reinforced with aluminium chips (AA6061) composite. Materials and technology, 55. pp. 347-354. ISSN 1582-2949

Al-Alimi, Sami and Lajis, Mohd Amri and Shamsudin, Shazarel and Chan, B.L. and Mohammed, Yahya and Ismail, Al Emran and Sultan, N. M. (2020) Development of metal matrix composites and related forming techniques by direct recycling of light metals: a review. International Journal of Integrated Engineering, 12 (1). pp. 144-171. ISSN 2600-7916

Rady, Mohammed Hussien and Mustapa, Mohammad Sukri and Wagiman, Abdullah and Shamsudin, Shazarel and Lajis, Mohd Amri and Sami Al Alimi2, Sami Al Alimi2 and Mansor, Mohamad Norani and Harimon, Mohd Azhar (2020) Effect of the heat treatment on mechanical and physical properties of direct recycled aluminium alloy (AA6061). International Journal of Integrated Engineering, 12 (3). pp. 82-89. ISSN 2229-838X

Nasir, Khairani and Abdul Rashid, Azrin Hani and Abd. Razak, Nurul Atikah and Shaari, Muhammad Farid and Roslan, Mohd Nazrul and Shamsudin, Shazarel and Ansar, Mohd Shukri and Husain, Siti Nor Hawanis and Dzulkefli, Syafiqah and Marsi, Noraini (2019) The tensile performance of r-PET bottle string: effects of different string sizes and cutting axes. Universal Journal of Mechanical Engineering, 7 (6C). pp. 1-6. ISSN 2332-3353

Ahmad, Azlan and Lajis, Mohd Amri and Shamsudin, Shazarel and Yusuf, Nur Kamilah (2018) Conjectured the behaviour of a recycled metal matrix composite (mmc–alr) developed through hot press forging by means of 3d fem simulation. materials, 11 (6). pp. 1-14. ISSN 1996-1944

Thesis

Shamsudin, Shazarel (2005) Development of the process planning for machining prismatic parts. Masters thesis, Universiti Putra Malaysia.