Items where Author is "Wahab, Md Saidin"

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Item Type | No Grouping
Number of items: 31.

Article

Wahab, Md Saidin and Rejab, Muhammad Nazri and Saiman, Mohd Pahmi (2014) Analysis of mechanical properties for 2D woven kenaf composite. Applied Mechanics and Materials, 660 . pp. 125-129. ISSN 1662-7482

Md Zain, Badrul Aisham and Khasim, Muhammad Farhan and Md Salleh, Salihatun and Wahab, Md Saidin (2014) Design concept of two tank reservoirs to maintain pH value for tiger prawn. Applied Mechanics and Materials, 660 . pp. 851-856. ISSN 1662-7482

Mustapa, Mohammad Sukri and Sabdin, Saiful Din and Abd Rahim, Erween and Wahab, Md Saidin and Yusof, Yusri (2014) Effect of heat compression on the tensile strength of PALF/sugarcane bagasse for disposable plate. Applied Mechanics and Materials, 660 . pp. 362-366. ISSN 1662-7482

Md Salleh, Salihatun and Md Zain, Badrul Aisham and Yahya, Mohd Shahir and Wahab, Md Saidin and Che Ghazali, C. H. I. and Yusof, M. S. (2014) Implementation of PLC system in fish feeding rate determination. Applied Mechanics and Materials, 660 . pp. 841-845. ISSN 1662-7482

Md Zain, Badrul Aisham and Kamarrudin, Mohamad Harith and Omar, Zamri and Wahab, Md Saidin (2014) New design flexible link aerator to generate dissolved oxygen in water. Applied Mechanics and Materials, 660 . pp. 857-862. ISSN 1662-7482

Wahab, Md Saidin and Rahman, N. A. and Mohamed, M. A. S. and Abd Rahim, Erween (2014) Optimization of laser cutting parameters on the laminated carbon fibre reinforced plastics (CFRP) composites using DOE Technique. Applied Mechanics and Materials, 660 . pp. 60-64. ISSN 1662-7482

Rosman, Nurafiqah and Harun, Zawati and Wahab, Md Saidin and Hubadillah, Siti Khadijah and Aminudin, Nurul Nabilah (2014) Phase transformation of rice husk ash in the synthesis of NaY Zeolite: effect of ageing in short crystalline duration. Australian Journal of Basic and Applied Sciences, 8 (15). pp. 152-159. ISSN 19918178

Rosman, Nurafiqah and Harun, Zawati and Wahab, Md Saidin and Hubadillah, Siti Khadijah and Aminudin, Nurul Nabilah (2014) Phase transformation of rice husk ash in the synthesis of NaY zeolite: effect of ageing in short crystalline duration. Australian Journal of Basic and Applied Sciences, 8 (15). pp. 152-159. ISSN 19918178

Wahab, Md Saidin and Sidek, Kamsidi @ Abd Malek and Yahya, Mohd Shahir and Ahmat, Muhammad Mustaqim (2014) Production improvement in an aircraft manufacturing company using value stream mapping approach. Applied Mechanics and Materials, 660 . pp. 1038-1042. ISSN 1662-7482

Wagiman, Abdullah and Wahab, Md Saidin and Mohid, Zazuli and Mamat, Azuddin (2013) Effect of GMAW-CMT heat input on weld bead profile geometry for freeform fabrication of aluminium parts. Applied Mechanics and Materials , 465 . pp. 1370-1374. ISSN 1660-9336

Abdul Haq, Reazul Haq and Wahab, Md Saidin and Mat Uzir , Wahit (2013) Improvement of mechanical properties of polycaprolactone (PCL) by addition of nano-montmorillonite (MMT) and hydroxyapatite (HA). Applied Mechanics and Materials , 315 (1). pp. 815-819. ISSN 1660-7482

Yusof, Yusri and Ahmad, Mohd Rizal and Wahab, Md Saidin and Mustapa, Mohammad Sukri and Tahar, Mohd Salleh (2011) Producing paper using pineapple leaf fiber. Advanced Materials Research, 383 . pp. 3382-3386. ISSN 1022-6680

Harun, Zawati and Kamarudin, N. H. and Badarulzaman, Nur Azam and Wahab, Md Saidin (2011) Shell mould composite with rice husk. Key Engineering Materials, 471 . pp. 922-927. ISSN 1662-9795

Book Section

Wahab, Md Saidin A method of producing a dental prothesis. In: Inovasi di persada Institut Pengajian Tinggi Malaysia 2011/2012. Universiti Kebangsaan Malaysia, p. 295.

Conference or Workshop Item

Mustapha, M.A. and Wahab, Md Saidin and Abd Rahim, Erween (2015) Analysis of mouthguard design by using CFD approach. In: International Engineering Research and Innovation Symposium 2015 (IRIS), 12–13 September 2015, Putrajaya, Malaysia.

Kamarudin, Khairu and Wahab, Md Saidin and Ramli, M. H. (2015) Characteristic of cobalt chromium by Nd:Yag laser sintering process. In: 9th International Conference on Advanced Computational Engineering and Experimenting (ACEX 2015), 29 June - 2 July 2015, Munich, Germany.

Wahab, Md Saidin and Wahid, M. U. and Abdul Haq, Reazul Haq (2015) Fused deposition modeling of PCL/HA/MMT biocompatible polymer nano-composites. In: International Conference on Advanced Computational Engineering and Experimenting (ACEX 2015)g, 29 June - 2 July 2015, Munich, Germany.

Ibrahim, Mohd Halim Irwan and Mohd Amin, Azriszul and Wahab, Md Saidin and Asmawi, Rosli and Mustafa, N. (2015) Solvent debinding variables on leaching fat, oil and grease (FOG) derivatives of green part stainless steel SS316L metal injection moulding. In: 2015 International Symposium on Technology Management and Emerging Technologies (ISTMET), 25-27 August 2015, Langkawi, Kedah, Malaysia.

Saiman, M. P. and Wahab, Md Saidin and Wahit, Mat Uzir (2014) The effect of fabric weave on tensile strength of woven kenaf reinforced unsaturated polyester composite. In: AAGBS International Conference on Business Management (AiCoBM 2014), 7-8 April 2014, Bayview Beach Resort, Penang Malaysia .

Mustapa, Mohammad Sukri and Sabdin, Saiful Din and Mohd Tobi, Abdul Latif and Wahab, Md Saidin and Mohamed Yunus, Mohd Radzi and Yusof, Yusri (2014) The effects of heat and compression on moisture content and water absorption of PALF/sugarcane bagasse composition in disposable plate production. In: International Integrated Engineering Summit (IIES 2014), 1-4 December 2014, Universiti Tun Hussein Onn Malaysia, Johor.

Md Salleh, Salihatun and Jafferi, Noormaziah and Md Zain, Badrul Aisham and lbrahim, Mohd Halim Irwan and Abd. Rahim , Erween and Wahab, Md Saidin and Mazlan, M. S. and Yong, M. H. and Samat, S. N. A. and Yusoff, M. F. M. (2013) Cabaran pembangunan sistem pemberi makanan ikan. In: Persidangan Kebangsaan Pertama Program Pemindahan Ilmu (KTP01), 21-23 Ogos 2013, Bangi. (Unpublished)

Abdul Haq, Reazul Haq and Wahab, Md Saidin and Wahit, Mat Uzir (2013) Impact test and bioactivity properties of polycaprolactone (PCL) by addition of nano-montmorillonite (MMT) and hydroxyapatite (HA). In: 2013 Asia Conference on Mechanical and Materials Engineering (ACMME), 8-9 October 2013, Wuhan, China.

Khairu, K. and Raman, I. and Mohamed, M. A. S. and Ibrahim , Mustafa and Wahab, Md Saidin (2012) Parameter optimerization for photo polymerization of microstereolithography. In: International Conference on Advanced Material Engineering & Technology (ICAMET 2012) , 28-30 November 2012, Penang, Malaysia.

Raman, I. and Syafiq, M. and Sa'ude, N. and Ibrahim , Mustafa and Wahab, Md Saidin (2012) Viscosity effect on piezoelectric actuated nozzle in generating micro droplet. In: International Conference on Advanced Material Engineering & Technology (ICAMET 2012) , 28-30 November 2012, Penang, Malaysia.

Kassim, Noraniah and Wahab, Md Saidin and Yusof, Yusri and Rajion, Zainul A. and Sahar, A. Jumali (2011) Physical properties and fracture surface of acrylic denture bases processed by conventional and vacuum casting fabrication technique. In: Proceeding of the 12th International Conference on QiR (Quality in Research), 4-7 July 2011, Bali, Indonesia.

Wahab, Md Saidin and Wagiman , Abdullah and Zuki, N. M. (2009) Rapid prototyping of wood-based material. In: Proceedings of MUCEET2009 Malaysian Technical Universities Conference on Engineering and Technology, June 20-22, 2009, MS Garden,Kuantan, Pahang, Malaysia.

Wahab, Md Saidin and Dalgarno, K.W. and Cochrane, R. F. (2008) Processing and properties of PA6/MMT clay nanocomposites produced using selective laser sintering. In: International Conference on Mechanical and Manufacturing Engineering 2008 (ICME 2008), 21-23 May 2008, Puteri Pacific Johor Bahru, Johor, Malaysia.

Wahab, Md Saidin and Wagiman , Abdullah and Zuki, N. M. Rapid prototyping of wood-based material. In: The 3rd Malaysian Technical Universities Conference on Engineering and Technology (MUCEET2009), 20-22 June 2009, Kuantan, Pahang.

Thesis

Wahab, Md Saidin (2009) Development of wood base material for rapid prototyping process. Other thesis, Universiti Tun Hussein Onn Malaysia.

Wahab, Md Saidin (2008) Selective laser sintering of polymer nanocomposites. PhD thesis, The University of Leeds.

Wahab, Md Saidin (2003) Defect detection in high pressure die casting product using image processing technology. Masters thesis, University of South Australia.

This list was generated on Mon Nov 20 20:08:08 2017 MYT.