Items where Division is "Faculty of Mechanical and Manufacturing Engineering > FKMP" and Year is 2025

Group by: Creators | Item Type | No Grouping

Jump to: A | B | D | H | J | M | N | O | R | S | T | W | X | Z

Number of items: 62.

A

Abdul Haq, Reazul Haq and Manshoor, Bukhari and Abdul Ghafir, Mohammad Fahmi and Hassan, Mohd Fahrul and Syed Abu Bakar, Sharifah Adzila and Abdol Rahman, Mohd Nasrull and Abd Aziz, Izhar and Sugianto, Welly (2025) Mechanical Properties of Recycled PET/PC/MDI Composite Fabricated by 3D Printing. Journal of Advanced Research in Applied Mechanics, 133 (1). pp. 24-35. ISSN 2829-7895

Abdul Haq, Reazul Haq and Manshoor, Bukhari and Abdul Ghafir, Mohammad Fahmi and Mohd Fahrul Hassan, Mohd Fahrul Hassan and Syed Abu Bakar, Sharifah Adzila and Abdol Rahman, Mohd Nasrull and Abd Aziz, Izhar and Sugianto, Welly (2025) Mechanical Properties of Recycled PET/PC/MDI Composite Fabricated by 3D Printing. Journal of Advanced Research in Applied Mechanics, 135 (1). pp. 24-35. ISSN 2829-7895

Abdullah, H. and Talib, N. and Zakaria, M. S. (2025) Evaluation Of Stress And Displacement In Hip Prostheses With Incorporating Hole And Fin Features Using Finite Element Method. Journal of Engineering Science and Technology, 20 (1). pp. 151-164.

Abu Bakar, Anis Farhana and Ahmad Zainuddin, Ahmad Hazly and Ahmad, Aida Husna and Olawale, Kazeem Babalola and Osman, Shahrul Azmir (2025) Assessment of Energy Efficiency Index and Consumption Analysis in Malaysian Commercial Laundry Operations. Journal of Advanced Research Design, 128 (1). pp. 116-124. ISSN 2289-7984

Ahmad, Aida Husna and Abu Bakar, Anis Farhana and Osman, Shahrul Azmir (2025) CFD Analysis of Thermal Conditions and Airflow Patterns in Commercial Laundry Facility using ANSYS Fluent Simulation. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 126 (2). pp. 106-126. ISSN 2289-7879

Azis, Mohammad Ivan and Firman, Firman and Magdalena, Ikha and Widowat, Widowat and Solekhudin, Imam and M. Yusup, Eliza (2025) Numerical Solutions of DCR Problems for Anisotropic FGMs of SpatioTemporal Dependent Properties and a Source Inclusion. Journal of Advanced Research in Numerical Heat Transfer, 30 (1). pp. 82-107. ISSN 2735-0142

Azis, Mohammad Ivan and Firman, Firman and Magdalena, Ikha and Widowati, Widowati and Solekhudin, Imam and M. Yusup, Eliza (2025) Numerical Solutions of DCR Problems for Anisotropic FGMs of SpatioTemporal Dependent Properties and a Source Inclusion. Journal of Advanced Research in Numerical Heat Transfer, 30 (1). pp. 82-4107. ISSN 2735-0142

Azis, Mohammad Ivan and Firman, Firman and Muh. Nur, Muh. Nur and M. Yusup, Eliza (2025) A Numerical Simulation for Heat Conduction in Anisotropic FGMs of Space-time Dependent Conductivities with Arbitrary Initial Conditions and Source Terms. Journal of Advanced Research in Numerical Heat Transfer, 29 (1). pp. 41-61. ISSN 2735-0142

Azman, Nor Aziera and Farhan, Irfan Alias and Mohd Nor, Mohd Khir and Abdul Samad, Mohd Syazwan and Jamian, Saifulnizan and Lajis, Mohd Amri and Yusuf, Nur Kamilah (2025) Numerical Prediction of Fracture and Perforation Behaviours of Recycled Aluminium Alloy AA6061 Using Taylor Cylinder Impact and Perforation Tests. Journal of Advanced Research in Applied Mechanics, 132 (1). pp. 39-59. ISSN 2289-7895

B

Bahrom, Mohd Zaki and Manshoor, Bukhari and Talib, Norfazillah and Zaman, Izzuddin and Didane, Djamal Hissein and Abdul Haq, Reazul Haq and Abdul Ghafir, Mohammad Fahmi and Kamarudin, Kamarul-Azhar and Abdul Murat, Noor Azammi and Mohamed, Zulkifli and Mondal, Mithun (2025) Tribological Performance of Hexagonal Boron Nitride (h-BN) Nanoparticle Additives in Multigrade Motorcycle Engine Oils. Journal of Advanced Research in Micro and Nano Engineering, 29 (1). pp. 91-103. ISSN 2756-8210

D

Darahman, Nur Husnina Dayana Maulad and M.Yusup, Eliza (2025) Evaluation Dye Penetration for Detecting Flaws in Aircraft Components. Journal of Mechanical and Sustainability Engineering Technology, 3 (1). pp. 1-14. ISSN 3083-8363

Daud, Aziah and Mohd Basri, Ijlal Syamim and Ahmad, Elyas and Mohd Hairon, Suhaily and Azmir, Nor Azali and Md Jalil, Azlis Sani and Nordin, Rusli (2025) Determinants of Work-Related Musculoskeletal Disorders Among Food Delivery Riders in Eastern Peninsular Malaysia: An Ergonomic Risk Assessment. Healthcare, 13 (645). pp. 1-15.

Didane, Djamal Hissein and Manshoor, Bukhari and Alimin, Ahmad Jais (2025) Bibliometric analysis of 50 years of energy research in Malaysia: Trends and opportunities. Renewable and Sustainable Energy Reviews, 214. pp. 1-14.

Didane, Djamal Hissein and Manshoor, Bukhari and Alimin, Ahmad Jais and A. Amin, Abdelazeem (2025) Bibliometric analysis of 50 years of energy research in Malaysia: Trends and opportunities. Renewable and Sustainable Energy Reviews, 214. pp. 1-14.

H

Hamidie, Aiman Haiqal Aizam and Adzila, Sharifah and Razak, Aisyah and Mat Isa, Najah (2025) Review of Biopolymer Composite Through 3D Printing Techniques. Biointerface Research in Applied Chemistry, 25 (1). pp. 1-18.

Hamidie, Aiman Haiqal Aizam Hamidie and Adzila, Sharifah and Razak, Aisyah and Mat Isa, Najah (2025) Review of Biopolymer Composite Through 3D Printing Techniques. Biointerface Research in Applied Chemistry, 15 (1). pp. 1-18.

Horng, Chia Zhi and Mohd Rosli, Mohd Afzanizam and Ponnaiyan, Jayaprakash and Salimen, Nurfarhana and Herawan, Safarudin Ghazali and Hussain, Faridah and Abdul Rashid, Azrin Hani (2025) Latent Heat Validation of Phase Change Material using T-History Method. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 127 (2). pp. 249-261. ISSN 2289-7879

J

Jaffar Sidek, Nur Izzah Atirah and Hussein, Siti Nurthoiyibatul Solehah and Osman, Shahrul Azmir and Ourdjini, Ali and Osman, Saliza Azlina (2025) A Case Study: Investigation of Untreated and Treated 304 Stainless Steel on Corrosion Behaviour. Journal of Advanced Research in Applied Mechanics, 128 (1). pp. 129-137. ISSN 2289-7895

M

M. Rus, Anika Zafah and Abd Wahab, Hanani and Saif, Yazid and Mars, Noraini and Zaliran, M. Taufq and Alamshah, M. Hafzh and Mariza, Ita and M. Rus, Shaiqah and Al‑Alimi, Sami and Zhou, Wenbin (2025) Morphological and acoustical characterization of UV‑irradiated foam composites from cooking oil and wood fake. Journal of Polymer Research, 32 (85). pp. 1-20.

M. Rus, Anika Zafah and Abd Wahab, Hanani and Saif, Yazid and Marsi, Noraini and Zaliran, M. Taufq and Alamshah, M. Hafzh and Ita Mariza, Ita Mariza and M. Rus, Shaiqah and Al‑Alimi, Sami and Zhou, Wenbin (2025) Morphological and acoustical characterization of UV‑irradiated foam composites from cooking oil and wood fake. Journal of Polymer Research. pp. 1-20.

M. Rus, Anika Zafiah and Abd Wahab, Hanani and Saif, Yazid and Marsi, Noraini and Zaliran, M. Taufiq and Alamshah, M. Hafizh and Ita Mariza, Ita Mariza and M. Rus, Shaiqah and Al‑Alimi, Sami and Zhou, Wenbin (2025) Morphological and acoustical characterization of UV‑irradiated foam composites from cooking oil and wood flake ) for photocatalytic application: a DFT study. Journal of Polymer Research, 32 (85).

M. Rus, Anika Zafiah and M. Salim, Nurul Syamimi and Abd Wahab, Hanani and Marsi, Noraini and Mat Hassan, Nik Normunira and Ibrahim, Siti Aida and Sulong, Nurulsaidatulsyida and Saryanto, Hendi and Alamsyah, M. Hafizh and Mariza, Ita (2025) Spectroscopic Studies of Synthesized Biopolymer Blended with Thermoplastic Polymer. Journal of Advanced Research in Micro and Nano Engineering, 29 (1). pp. 114-123. ISSN 2756-8210

M. Rus, Anika Zafiah and M. Salim, Nurul Syamimi and Abd Wahab, Hanani and Marsi, Noraini and Mat Hassan, Nik Normunira and Ibrahim, Siti Aida and Sulong, Nurulsaidatulsyida and Saryanto, Hendi and Alamsyah, M. Hafizh A and Ita Mariza, Ita Mariza (2025) Spectroscopic Studies of Synthesized Biopolymer Blended with Thermoplastic Polymer. Journal of Advanced Research in Micro and Nano Engineering, 29 (1). pp. 114-123. ISSN 2756-8210

Mohammad Hisyammuden, Muhammad Syahmi and Hassan, Suhaimi and Zakaria, Syazwan and Mustaffa, Musfirah and Iqumal Jumari, Mohamad Zhairul and Mat Nadir, Mohamad Amirul and Mohd Yusof, Norbazlan (2025) Experimental Mechanical Testing on Signal Warning Detection (SWAD) System. Journal of Advanced Research in Applied Mechanics, 129 (1). pp. 144-152. ISSN 2289-7895

Mohammad Hisyammuden, Muhammad Syahmi and Hassan, Suhaimi and Zakaria, Syazwan and Mustaffa, Musfirah and Jumari, Mohamad Zhairul Iqumal and Mat Nadir, Mohamad Amirul and Mohd Yusof, Norbazlan and Ikhsan, Mohamad Shah and Ismon, Maznan and Zakaria, Hanis and Mohd Faizan Marwah, Omar (2025) Experimental Mechanical Testing on Signal Warning Detection (SWAD) System. Journal of Advanced Research in Applied Mechanics, 129 (1). pp. 144-152. ISSN 2289-7895

Mohd Rus, Anika Zafiah and Salim, Nurul Syamimi and Abd Wahab, Hanani and Marsi, Noraini and Mat Hassan, Nik Normunira and Saryanto, Hendi and Sulong, Nurulsaidatulsyida and Nik Yusuf, Nik Alnur Auli and Alamsyah, Muhammad Hafizh and Mariza, Ita (2025) Sustainable Waste Oils Polymer Doped with Titanium Dioxide as Ultraviolet Stabilizer. Journal of Advanced Research in Micro and Nano Engineering, 27 (1). pp. 58-75. ISSN 2756-8210

Muhamad Damanhuri, Amir Abdullah and Hariri, Azian and Ab Ghani, Sharin and Md Fauadi, Muhammad Hafidz Fazli and Mustafa, Mohd Syafiq Syazwan and Zakaria, Anies Faziehan and Subri, Ummu Sakinah (2025) Reducing aerosol formation from SLS PA12 powder using response surface methodology via optimization of refresh rate and powder handling activities. Multidisciplinary Science Journal. pp. 1-12. ISSN 2675-1240

Muhamad Damanhuri, Amir Abdullah and Mohd Ishak, Nur Nabilah and Tuan, Tee Boon and Mustafa, Mohd Syafiq Syazwan and Lubis, Abdul Munir Hidayat and Khean, Chang Choo (2025) Evaluation Thermal Comfort based on PMV and PPD using CBE Tool for Three Non-Air-Conditioned Pre School: A Case Study in Melaka Tengah, Malaysia District Area. Journal of Design and Built Environment. pp. 126-135. ISSN 2232-1500

Mun Kit, Fong and Abdul Haq, Reazul Haq and Singh, Yashvir and Abdul Ghafir, Mohammad Fahmi and Hassan, Mohd Fahrul and Syed Abu Bakar, Sharifah Adzila and Hoffmann, Jörg (2025) Optimization of Electroless Plating Solution Parameter for Coating PETG Electrode with Copper using Design of Experiment (DOE). Journal of Advanced Research in Applied Mechanics, 125 (1). pp. 1-13. ISSN 2829-7895

N

Nasution, Fikri Fahlevi and Iman Mainil, Rahmat and Taib, Ishkrizat and Martin, Awaludin (2025) Experiment Investigation of Air Blast Freezer in a Cascade Refrigeration System with R290/R32 for Vannamei Shrimp. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 127 (2). pp. 234-248. ISSN 2289-7879

Noor Azman, Nur Eilyana Izzatie and Marsi, Noraini and Yusrianto, Efil and Tuan Ismail, Tuan Noor Hasanah and Mohd Rus, Anika Zafiah and Shariff, Hafizuddin Hakim and Zambri, Nur Farisyah Hidayah and Mohd Farid Wajdi, Siti Zulaiqha Wajdi and Ali, Akhtar (2025) Performance Autoclaved Aerated Concrete of Crushed Coconut Shell (AAC-CCS) for AAC Board Panels. Semarak International Journal of Material Research, 2 (1). pp. 52-65. ISSN 3083-8908

O

Othman, Nurul Atiqah and Che Zakaria, Noor Ayuni and Johar, Khairunnisa and Hanapiah, Fazah Akhtar and Mohamad Hashim, Natiara and Low, Cheng Yee and Yee, Jingye (2025) Quantifying Spasticity: Developing a Data-Driven Approach Through the Modified Ashworth Scale and Simulated Spasticity Model. Journal of Mechanical Engineering, 22 (1). 137 -153.

R

Rahman, Huzainie Hadi and Basri, Azizul Qayyum and Awang Zainal, Awangku Zaini and M. Yasir, Ahmad Shah Hizam and Zaini, Khazaila and Hussain, Mohd Amirul and Nelfiyanti, N and Othman, Muhammad Azri (2025) A Case Study: Innovation of Technology for Prototyping an Aquaponic Mobile Starter Pack in The TVET Syllabus Use Design Development & Research (DDR). -, 17 (1). pp. 27-53.

S

Saleman, Abdul Rafeq and Zakaria, Mohamad Shukri and Mohd Rosli, Mohd Afzanizam and Manshoor, Bukhari (2025) Adsorption Mechanism of Linear Alkane Liquid in Contact with Face Centred Cubic Lattice. CFD Letters, 17 (8). pp. 1-12. ISSN 2180-1363

Samian, Ain Zubaidah and Saleh, Aslinda and Talib, Norfazillah and Abdullah, Haslina and Kiow, Lee Woon (2025) Effect Of Flux Application During In-Situ Casting As A Direct Recycling Of Alsi7mg Aluminium Alloy Machining Chips. Jurnal Teknologi, 87 (2). pp. 231-238. ISSN 2180–3722

T

TALIB, NORFAZILLAH (2025) Developments and Trends in Welding Development. In: Advanced Welding Technologies. Scrivener Publishing, pp. 25-32. ISBN 9781394331895

Talib, Norfazillah (2025) Abrasive Flow Finishing. In: Advanced Machining and Micromachining Processes. Wiley, pp. 447-459. ISBN 9781394301690

Talib, Norfazillah (2025) Photochemical Machining. In: Advanced Machining and Micromachining Processes. Scrivener Publishing, pp. 203-213. ISBN 9781394301690

Talib, Norfazillah and Mandal, Gurudas and T, Jagadeesha and Kunar, Sandip (2025) Elastic Emission Machining. In: Advanced Machining and MIcromachining Processes. Wiley, pp. 463-465.

Talib, Norfazillah and Sandip, Kunar and Jagadeesha, T and Chika Oliver, Ujah and Gurudas Mandal, Gurudas Mandal and Akhilesh Kumar, Singh and Aezeden, Mohamed (2025) Introduction to Advanced Welding Processes. In: Advanced Welding Technologies. Scrivener Publishing, pp. 3-22.

Tukimon, Mohd Faizal and Abd Rahman, Hamimah and Amirnordin, Shahrin Hisham and Mohd Halil, Aiman and Salleh, Khairul Anuar and Huai, Tan Kang and Jaidi, Zolhafizi and Elshaikh, Mohamed Abdelghani Elsayed Abdelghani (2025) Influence of Laser Speed on the Area-Specific Resistance in Welded Stainless Steel for Solid Oxide Fuel Cell Interconnect. Journal of Advanced Research in Applied Mechanics, 134 (1). pp. 25-34. ISSN 2289-7895

W

Wai, Chew Kuew and Sadeq, Taha and Hau, Lee Cheun (2025) Advanced Adaptive Rule-Based Energy Management for Hybrid Energy Storage Systems (HESSs) to Enhance the Driving Range of Electric Vehicles. Vehicles, 7 (6). pp. 1-23.

Wirawan, Willy Artha and Sabitah, Ayan and Sakti, Gunawan and Harianto, Bambang Bagus and Choiron, Moch. Agus and Ilyas, R.A. and Sapuan, S.M. and Prasetijo, Joewono (2025) Crashworthiness characteristic of aluminum/composite hybrid tubes under axial compression. Results in Engineering, 25. pp. 1-14.

X

Xuan, Yeo Yi and Ridzuan, M. J. M and Abdul Majid, M. S and Rahman, M. T. A and Marsi, Noraini and Sulaiman, Mohd Hafis (2025) Effect of elevated temperatures on wear and frictional performance of Pineapple Leaf Fiber-Reinforced natural rubber composites with the addition of multi-walled carbon nanotubes. Polymer Composites. pp. 1-12.

Xuan, Yeo Yi and Ridzuan, M. J. M. and Abdul Majid, M. S. and Rahman, M. T. A. and Marsi, Noraini and Sulaiman, Mohd Hafis (2025) Effect of elevated temperatures on wear and frictional performance of Pineapple Leaf Fiber-Reinforced natural rubber composites with the addition of multi-walled carbon nanotubes. Polymer Composites.. pp. 1-12.

Z

Zahar, Nuraqilah and Manshoo, Bukhari and Roslan, Mohamad Hafizuddin and Sapit, Azwan and Zaman, Izzuddin and Didane, Djamal Hissein and Abdul Haq, Reazul Haq and Kamarudin, Kamarul-Azhar and Saleman, Abdul Rafeq and Rathje, Rio Marco and Rothe, Christin and Ibrahim, Mohd Nizam (2025) Simulation of Liquid NH3 Spray Characteristics for Gasoline Direct Injection (GDI) under Engine-Relevant Conditions. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 126 (2). pp. 62-72. ISSN 2289-7879

Zahari, Nuraqilah and Manshoor, Bukhari and Roslan, Mohamad Hafizuddin and Sapit, Azwan and Zaman, Izzuddin and Didane, Djamal Hissein and Abdul Haq, Reazul Haq and Kamarudin, Kamarul-Azhar and Saleman, Abdul Rafeq and Rathje, Rio Marco and Rothe, Christin and Ibrahim, Mohd Nizam (2025) Simulation of Liquid NH3 Spray Characteristics for Gasoline Direct Injection (GDI) under Engine-Relevant Conditions. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 126 (2). pp. 62-72. ISSN 2289-7879

Zahari, Nuraqilah and Manshoor, Bukhari and Zaman, Izzuddin and Abdul Haq, Reazul Haq and Abdul Ghafir, Mohammad Fahmi and Salleh, Mohd Rosdi and Rathje, Rio Marco and Rothe, Christin and Ibrahim, Mohd Nizam (2025) Evaluation Of Gasoline Direct Injection Spray Morphology For Varies Injection Pressure Using Discrete Phase Model (Dpm) Approach. International Journal Of Innovation And Industrial Revolution (Ijirev), 7 (20). pp. 330-343. ISSN 2637-0972

Zambri, Nur Farisyah Hidayah and Marsi, Noraini and Yusrianto, Efil and Noor Azman, Nur Eilyana Izzatie and Mohd Farid Wajdi, Siti Zulaiqa Wajdi and Sadun, Amirul Syafiq and Main, Nor Mazlana and Shariff, Hafizuddin Hakim and Ali, Akhtar (2025) The Effects of Direct Fire and Strength on Autoclaved Aerated Concrete Containing Semiconductor Electronic Molding Resin Waste (AAC-SEMRW) on Partition Panel Application. Semarak International Journal of Material Research, 2 (1). pp. 25-37. ISSN 3083-8908

Zulkurnain, Muhammad Nasiruddin and Osman, Shahrul Azmir and Ourdjini, Ali and Osman, Saliza Azlina (2025) A Case Study on Ionic Compounds on the Aluminium 6061 Surface during Etching and Passivating Processes. Journal of Advanced Research in Applied Mechanics, 128 (1). pp. 152-161. ISSN 2289-7895

This list was generated on Tue Aug 11 22:16:02 2026 +08.

Export as	Atom RSS 1.0 RSS 2.0