Items where Division is "Faculty of Mechanical and Manufacturing Engineering > Department of Aeronautical Engineering" and Year is 2020

A

A. Rahman, Abdul Hakim and Sies, M. Farid and Ismon, Maznan and Roslan, Mohd Nazrul and Idris, Ahmad Fu’ad (2020) Noise control in air conditioning system. In: Recent Development in Industrial and Indoor Environment Research Studies. Penerbit UTHM, pp. 93-97. ISBN 978-967-2916-43-7

Abd Rahman, Muhammad Faqhrurrazi and Asmuin, Nor Zelawati and Taib, Ishkrizat and Hidayat Mat, Mohamad Nur and Khairulfuaad, Riyadhthusollehan (2020) Influence of Actuator Nozzle Angle on the Flow Characteristics in Pressurized-Metered Dose Inhaler Using CFD. CFD Letters, 12 (6). pp. 67-79. ISSN 21801363

Abdullah, Aslam (2020) Condition for non-oscillatory solution for scalar convection-dominated equation. CFD Letters, 12 (4). pp. 24-34. ISSN 2180-1363

Al-Ghriybah, Mohanad and Zulkafli, Mohd Fadhli and Didane, Djamal Hissein and Mohd, Sofian (2020) Performance of the savonius wind rotor with two inner blades at low tip speed ratio. CFD Letters, 12 (3). pp. 11-21. ISSN 2180-1363

Andias, Rino and Ahmad, M.A. Haikal and Rahim, M. Zulafif and Haq, RHA and Sabri, A. M and Aziz, N. Hafizah and Tajul Ariffin, Ahmad Mubarak and Ismail, Al Emran and Ibrahim, Rasidi (2020) The influence of graphitization catalyst electrode in electrical discharge machining of polycrystalline diamond-finishing condition. The International Journal of Integrated Engineering, 12 (2). pp. 211-217. ISSN 2229-838X

Ariffin, Ahmad Hamdan and Ahmad, Kamarul Ariffin (2020) Computational fluid dynamic (CFD) simulation of synthetic jet cooling: a review. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 72 (2). pp. 103-112. ISSN 2289-7879

Ariffin, Ahmad Hamdan and Wan Hassan, W.A.S. and Ahmad, F. and Hamzah, N. and Rubani, Siti Nur Kamariah and Zakaria, Normah (2020) Students' self-directed learning readiness towards using the “SolveMe” Web in Technical and Vocational Education. International Journal of Advanced Trends in Computer Science and Engineering, 9 (3). pp. 3763-3768. ISSN 2278-3091

Asmuin, Norzelawati and Alimin, Ahmad Jais and Salleh, Hamidon and Ismail, Al-Emran and Mohd Ali, Mas Fawzi and Mat Isa, Norasikin and Manshoor, Bukhari and Sadikin, Azmahani (2020) Kitchen exhaust ventilation: promotion of the establishment on the integrated sustainable industry at R&D Halton Group Sdn. Bhd. In: Recent Development in Industrial and Indoor Environment Research Studies. Penerbit UTHM, pp. 116-123. ISBN 978-967-2916-43-7

Asmuin, Norzelawati and Khalid, Amir and Mohideen Batcha, Mohd Faizal (2020) Investigation on characteristic behaviour on developing atomizer for fine spray using PIV. In: Recent Development in Industrial and Indoor Environment Research Studies. Penerbit UTHM, pp. 133-144. ISBN 978-967-2916-43-7

Asmuin, Norzelawati and Osman, Kahar and Mohd Ali, Mas Fawzi and Mat Isa, Norasikin and Sies, Mohd Farid (2020) A new approach for improving cleaning system of air filtration in kitchen hood using liquid mist spray nozzles with non-volatile organic compound. In: Recent Development in Industrial and Indoor Environment Research Studies. Penerbit UTHM, pp. 124-132. ISBN 978-967-2916-43-7

C

Che Ibrahim, Che Intan Hartini and Abdullah, Aslam (2020) Flow topology around low reynolds number airfoils with vortex shedding. CFD Letters, 12 (12). pp. 85-103. ISSN 2180-1363

G

Guangxian, Li and Rahim, Mohammad Zulafif and Wencheng, Pan and Cuie, Wen and Songlin, Ding (2020) The manufacturing and the application of polycrystalline diamond tools – A comprehensive review. Journal of Manufacturing Processes, 56 (Part A). pp. 400-416. ISSN 1526-6125

H

Hadi, Muhammad Irfan and Nazri, Mohd. and Abdullah, Aslam (2020) Vortex formation in unsteady flow over NACA 4412 and NACA 4424 airfoils. ARPN Journal of Engineering and Applied Sciences, 15 (1). pp. 27-33. ISSN 1819-6608

Hariri, Azian and Idris, Ahmad Fu’ad and Nasir, Nurul Fitriah and Nordin, Normayati (2020) Association between thermal condition, thermal acceptability and student's performance in naturally ventilated classroom for school building enhancement. In: Recent Development in Industrial and Indoor Environment Research Studies. Penerbit UTHM, pp. 44-60. ISBN 978-967-2916-43-7

Hidayat Mat, Mohamad Nur and Asmuin, Nor Zelawati and Md Basir, Md Faisal and Goodarzi, Marjan and Abd Rahman, Muhammad Faqhrurrazi and Khairulfuaad, Riyadhthusollehan and Jabbar, Balasem Abdulameer and Mohd Kasihmuddin, Mohd Shareduwan (2020) Influence of divergent length on the gas-particle flowin dual hose dry ice blasting nozzle geometry. Powder Technology, 364. pp. 152-158. ISSN 0032-5910

J

Jol, P. Jose and Amin, A. M. and Ibrahim, M. H. I. and Zhong, Z.W. and Shamsudin, S. (2020) Debinding process of ss316L metal injection moulding under argon atmosphere. Journal of Advanced Manufacturing Technology, 14 (2). ISSN 1985-3157

L

Law, Mohd Syafiq Aidil and Ariffin, Ahmad Hamdan (2020) A review on the aerodrome standard in the aviation industry. Journal of Aviation and Aerospace Technology, 2 (2). pp. 1-4.

M

Mat, Mohamad Nur Hidayat and Asmuin, Nor Zelawati and Md. Basir, Md. Faisal and Goodarzi, Marjan and Hasan, Nor Halim (2020) Effect of impact force for dual-hose dry blasting nozzle geometry for various pressure and distance: an experimental work. European Physical Journal Plus (EPJ Plus), 135 (260). pp. 1-11. ISSN 2190-5444

Md Shah, Mohd Zarif and Basuno, Bambang and Abdullah, Aslam (2020) Comparative study on several type of turbulence model available in ANSYS-fluent software for ONERA M6 wing aerodynamic analysis. Journal of Advanced Mechanical Engineering Applications, 1 (1). pp. 9-19. ISSN 27166201

Mohd Jamail, Nor Akmal and Sies, Mohamad Farid (2020) Formulations of linear low-density polyethylene-natural rubber (LLDP-NR) nanocomposite with high mechanical and dielectric strength for electrical insulation. In: Recent Development in Industrial and Indoor Environment Research Studies. Penerbit UTHM, pp. 37-43. ISBN 978-967-2916-43-7

Muhamad Damanhuri, Amir Abdullah and Hariri, Azian and Nordin, Normayati (2020) Behavior and impact of polyamide nylon to the indoor air quality during SLS powder handling process. In: Recent Development in Industrial and Indoor Environment Research Studies. Penerbit UTHM, pp. 98-115. ISBN 978-967-2916-43-7

N

Najah, M. I. and Razak, Aisyah and Che Shukur Nekmat, Nor Aida and Adzila, Sharifah and Othman, Raudhah and Nordin, Normayati (2020) Characterization of calcium carbonate extracted from eggshell waste at various calcination temperature. International Journal of Emerging Trends in Engineering Research, 8 (10). pp. 6725-6731. ISSN 2347-3983

Najeeb, M.I. and Sultan, M.T.H. and Andou, Yoshito and Shah, A.U.M and Eksiler, Kubra and Jawaid, M. and Ariffin, A.H. (2020) Characterization of silane treated Malaysian Yankee Pineapple AC6 leaf fiber (PALF) towards industrial applications. Journal of Material Research and Technology, 9 (3). pp. 3128-3139. ISSN 2238-7854

S

Saim, Raudhah and Mohd, Sofian and Shamsudin, Syariful Syafiq and Zulkafli, Mohd Fadhli and Mohd Yunos, Siti Nur Mariani and Abd Rahman, Muhammad Riza (2020) Computational fluid dynamic (CFD) analysis of parachute canopies design for aludra SR-10 UAV as a parachute recovery systems (PRS). CFD Letters, 12 (2). pp. 46-57. ISSN 2180-1363

W

W.A.S., Wan Hassan and Ariffin, Ahmad Hamdan and F., Ahmad and S.N.M., Sharberi and M. I., Nor Azizi and Zulkiflee, S.N. (2020) COVID-19 Pandemic: Langkawi Vocational College Student Challenge in Using Google Classroom for Teaching and Learning (T&L). International Journal of Advanced Trends in Computer Science and Engineering, 9 (3). pp. 3299-3307. ISSN 2278-3091

Z

Zainal Bakri, Siti Farhana and Hariri, Azian and Nasir, Nurul Fitriah (2020) Development of welding lung assessment (WELA) as a prognosis tool of lung impairment from heavy metal exposure among Malaysian welder. In: Recent Development in Industrial and Indoor Environment Research Studies. Penerbit UTHM, pp. 61-92. ISBN 978-967-2916-43-7

Zakaria, Hanis and Hassan, Suhaimi and Azmi, Mohd Azham (2020) Evaluation on effect of abrasive blasting media to the environment and human safety and health. In: Recent Development in Industrial and Indoor Environment Research Studies. Penerbit UTHM, pp. 1-10. ISBN 978-967-2916-43-7

Zakaria, Hanis and Hassan, Suhaimi and Azmi, Mohd Azham (2020) Reducing air pollution and occupational health risk using palm olein abrasive blasting for metal surface cleaning applications. In: Recent Development in Industrial and Indoor Environment Research Studies. Penerbit UTHM, pp. 11-36. ISBN 978-967-2916-43-7

Zuhair, M. R. M. and Hamdan, A. and Irfan, A. R. (2020) Application of natural fibre composite in the aviation industry: a review. Journal of Aviation and Aerospace Technology, 2 (1). pp. 1-5.