Items where Division is "Faculty of Mechanical and Manufacturing Engineering > Department of Mechanical Engineering" and Year is 2022

Abd Rahman, Muhammad Faqhrurrazi (2022) The improvement of pressurized metered-dose inhaler and spacers for treating respiratory diseases. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Abdul Manap, Muhamad Zariq Imran (2022) Development of solar photovoltaic (PV) temperature control system for mushroom house. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdulkareem, Ali Nasr and Nasir, Nurul Fitriah (2022) Biodiesel production from canola oil using TiO2CaO as a heterogenous catalyst. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 93 (2). pp. 125-137. ISSN 2811-3950

Abdullah, Abdullah Ibrahim (2022) Design of a hybrid haptic wearable device for upper limb amputees to recover the missing sensation. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdulsalam, Najdat Hameed (2022) A framework of tqm and organizational performance with ISO 9001 and innovation as mediators in Iraqi Manufacturing Companies. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Adam, Daud (2022) Inter-rater reliability of the assessor hazard rating assessment for chemical hazardous to health in Malaysia (Klang Valley). Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ahmed Abo Mosali, Najm Addin Mohammed (2022) Reinforcement learning-based target tracking for unmanned aerial vehicle with achievement rewarding and multistage traning. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Ainuddin, Ainun Rahmahwati and Mohd Ismail, Siti Sarah and Kamdi, Zakiah and Hussin, Rosniza and Ibrahim, Siti Aida (2022) Growth of nanostructured zinc oxide on flexible conductive substrate: a review. Trans Tech Publications Ltd, Switzerland.

Al-Qaysi, Ali Abdulqader Mustafa (2022) Enhancing the cooling system of a residential building using integrated building information modelling with solar absorption system. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Anpalagan, Ranjhini (2022) Investigation on mechanical properties of cockle shell composite structure under temperature and aging influence. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Bakhuraisa, Yaser and Abd Aziz, Azlan and Tan, Kim Geok and Jamian, Saifulnizan and Mustakim, Fajaruddin (2022) A survey of ranging techniques for vehicle localization in intelligence transportation system: challenges and opportunities. International Journal of Electrical and Computer Engineering (IJECE), 12 (6). pp. 6248-6260. ISSN 2088-8708

Kamarudin, Noor Hasliza (2022) Fabrication and characterisation of ceramic hollow fibre membrane from metakaolin and corn cob ash for oil–water separation. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Kareem, M. W. and Habib, Khairul and A. Pasha, Amjad and Irshad, Kashif and Afolabi, L.O. and Saha, Bidyut Baran (2022) Experimental study of multi-pass solar air thermal collector system assisted with sensible energy-storing matrix. Energy, 245. pp. 1-12.

Khairu Razak, Siti Badriah (2022) Markerless motion capture system via kinematic analysis of angular lower limb. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Kholil, Muhammad (2022) A lean six sigma framework for identifying sources of waste in manufacturing sector in Indonesia. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Lai, Chee Fung (2022) The simulation study of preheating temperature and blank thickness on hot press forming of aluminium alloy 6061. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Lim, Shing Chee (2022) Development of electrospinning machine for the production of homogeneous and functionally graded multilayer polymeric nanofibers. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohamed Rasidi, Shamsuri (2022) Development of subsonic curved diffuser performance correlations integrated angle of turns using asymptotic computational fluid dynamics. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohammed Saif, Yazid Abdullsameea (2022) A smart vision inspection system on step-NC machine with IOT Environment. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Akhair, Siti Hajar (2022) The development of mixed-matrix membrane incorporated with reduced graphene oxide synthesized using murraya koenigii leaf for oil/water separation. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mondal, Mithun and Didane, Djamal Hissein and Ali, Alhadj Hisseine Issaka and Manshoor, Bukhari (2022) Technical assessment of wind energy potentials in Bangladesh. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 96 (2). pp. 10-21.

Mustafa Al-Qaysi, Ali Abdulqader (2022) Enhancing the cooling system of a residential building using integrated building information modelling with solar absorption system. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ng, Nicolas Yang Zu (2022) Performance evaluation of electrode fabricated by fused deposition modelling in die-sinking electrical discharge machining. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Samsudin, Sheikh Saiful Azam (2022) Potentials of energy efficiency in a public hospital: a case Study in Hospital Kajang. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Shoib, Abdul Rashid (2022) Study of wind energy potential at selected wind speed stations in Peninsular Malaysia using weibull distribution function. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Shoib, Abdul Rashid (2022) Study of wind energy potential at selected wind speed stations in Peninsular Malaysia using weibull distribution function. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Subramaniam, Kamalleswaran (2022) Prediction of an electrically turbocharged engine and performance prediction in an actual drive cycle. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Sulistyo, Budi (2022) Development of an enterprise excellence index for indonesian state-owned enterprises using anp method. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Sulong, Nurulsaidatulsyida (2022) Photo-degradation of renewable biopolymer blended with thermoplastic high density polyethylene (HDPE). Doctoral thesis, Universiti Tun Hussein Onn Malaysia.