UTHM Institutional Repository

Items where Division is "Faculty of Electrical and Electronic Engineering > Department of Electronic Engineering" and Year is 2013

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type | No Grouping
Jump to: A | J | M | S | W | Z
Number of items: 20.

A

Abdullah, Muhammad Rosli and Salim, Safyzan and Abdul Jamil, M. Mahadi (2013) Telemedicine system: wireless healthcare units via RF, GSM, bluetooth and PDA. In: International Conference on Control System, Computing and Engineering, 29 November – 1 December 2013, Penang, Malaysia.

Adon, Mohamad Nazib and Dalimin, M. Noh and Abdul Jamil , Muhammad Mahadi and Mohd Kassim, Norazan and Hamdan, Salehuddin (2013) Electrofusion effect of induced transmembrane potential under a live - cell microscopy system. In: The 2013 Biomedical Engineering International Conference (BMEiCON-2013), 23 Oct - 25 Oct 2013, Pavilion Queen’s Bay, Krabi, Thailand.

Ahmad, M. Shukri and Ahmad Alabqari , Ma'radzi and Nuwairi, M. and Abdul Jamil , Muhammad Mahadi (2013) Foot rehabilitation monitoring device. In: 2013 IEEE International Conference on Control System, Computing and Engineering (ICCSCE 2013) , 29 November – 1 December 2013, Penang, Malaysia .

Ahmad, Mohd Khairul and Kenji, Murakami (2013) Effect of surface morphology of nanostructured rutile TiO2 nanorods/nanoflowers as photoelectrode on the performance of dye-sensitized solar cell. In: 2nd International Conference on Solar Energy Materials, Solar Cells and Solar Energy Applications , 22-24 Ogos 2013, Universiti Malaya.

J

Jill, Susana and S., Suzieyana and Ahmad Alabqari , Ma'radzi (2013) Design and simulation of mass-spring-dashpot system for RFMEMS switch. In: 2013 IEEE International Conference on Control System, Computing and Engineering (ICCSCE 2013) , 29 November – 1 December 2013, Penang, Malaysia .

Jumadi, Nur Anida and Gan, Kok Beng and Mohd Ali, Mohd Alauddin and Zahedi, Edmond (2013) Determination of the optode array representation using optical properties at systole and diastole. Optica Applicata, 43 (4). ISSN 0078-5466

M

Maksud, M. I. and Yusof, M. S. and Abdul Jamil, M. Mahadi (2013) Optimizing a polydimethylsiloxone (PDMS) into flexographic printing process for RFID biomedical devices and cell cultures. In: The 2013 Biomedical Engineering International Conference (BMEiCON-2013), 23 Oct - 25 Oct 2013, Pavilion Queen’s Bay, Krabi, Thailand.

Maksud, M. I. and Yusof, M. S. and Abdul Jamil, M. Mahadi (2013) An investigation of parameter effect on microcontact printing and feasibility study for application in microelectronic and biomedical. In: The 2013 Biomedical Engineering International Conference (BMEiCON-2013), 23 Oct - 25 Oct 2013, Pavilion Queen’s Bay, Krabi, Thailand.

Maksud, M. I. and Yusof, Mohd Sallehuddin and Abdul Jamil , Muhammad Mahadi (2013) A study on printed multiple solid line by combining microcontact and flexographic printing process for microelectronic and biomedical applications. International Journal of Integrated Engineering , 5 (3). pp. 36-39. ISSN 2229-838X

Malek, S. Nur Hidayah and Wan Zaki, W. Suhaimizan and Joret, A. and Abdul Jamil, M. Mahadi (2013) Design and development of wireless stethoscope with data logging function. In: 2013 IEEE International Conference on Control System, Computing and Engineering (ICCSCE 2013), 29 November – 1 December 2013, Penang, Malaysia.

Mohamad, Fariza and Anak Abang, Connie and Muhd Nor, Nik Hisyamudin and Izaki, Masanobu (2013) The effect of solution temperature on electrodeposit-ZnO thin film. In: Advanced Materials Engineering and Technology (ICAMET 2013) , 28-29 November 2013, Bandung, Indonesia .

Mohamed, Masnani and Lee, Chee Chuan and Ahmad, Ida Laila (2013) Feature extraction of speech signal and heartbeat detection in angry emotion identification. International Journal of Computer Science and Electronics Engineering (IJCSEE), 1 (1). ISSN 2320–4028

Mohamed, Masnani and Jusoh, Noordina Syazana and Ahmad, Ida Laila (2013) Anger mood detection based on face recognition and heartbeat. International Journal of Engineering Research & Technology (IJERT), 2 (2). pp. 1-6. ISSN 22780181

Mohd Ali, A. Malik and Abdul Jamil, M. Mahadi (2013) Biomechatronics design of a novel artificial arm. In: The 2013 Biomedical Engineering International Conference (BMEiCON-2013), 23 Oct - 25 Oct 2013, Pavilion Queen’s Bay, Krabi, Thailand.

S

Safyzan, S. and Badri, A. B. and Abdul Jamil , Muhammad Mahadi (2013) Exploitation of accelerometer for rehabilitation process. In: 2013 IEEE International Conference on Control System, Computing and Engineering (ICCSCE 2013), 29 November – 1 December 2013, Penang, Malaysia.

Sanudin, Rahmat and Sahdan, Mohd Zainizan and Mohd Tawil, Siti Nooraya and Sulong, Muhammad Suhaimi (2013) Implementing online assessment in electronic engineering course for undergraduate students in UTHM. In: 2nd Regional on Engineering Education (RCEE2007), 3-5 December 2007, Johor Bahru.

Soon , Chin Fhong and Khaghani, Seyed Ali and Youseffi, Mansour and Nayan, Nafarizal and Saim, Hashim and Stephen, Britland and Nick, Blagden and Clive, Morgan Thomas Denyer (2013) Interfacial study of cell adhesion to liquid crystals using widefield surface plasmon resonance microscopy. Colloids and Surfaces B: biointerfaces, 110. ISSN 0927-7765

Soon , Chin Fhong and Wan Omar, Wan Ibtisam and Nayan, Nafarizal and Basri, Hatijah and Narawi, Martha and Kian Sek , Tee (2013) A bespoke contact angle measurement software and experimental setup for determination of surface tension. In: 4th International Conference on Electrical Engineering and Informatics (ICEEI 2013), 24-25 June 2013, Universiti Kebangsaan Malaysia.

W

Wibawa, Pratama Jujur and Saim, Hashim and Agam, Mohd. Arif and Nur, Hadi (2013) Manufacturing and morphological analysis of composite material of polystyrene nanospheres/cadmium metal nanoparticles. Bulletin of Chemical Reaction Engineering & Catalysis, 7 (3). pp. 224-232. ISSN 19782993

Z

Zaltum, Mohamed A. Milad and Adon, Mohamad Nazib and Abdul Jamil , Muhammad Mahadi (2013) Electroporation effect on growth of HeLa cells. In: The 2013 Biomedical Engineering International Conference (BMEiCON-2013), 23 Oct - 25 Oct 2013, Pavilion Queen’s Bay, Krabi, Thailand.

This list was generated on Tue Jun 2 23:12:35 2020 +08.