Items where Division is "Faculty of Civil Engineering and Built Environment > Department of Civil Engineering : Building and Construction Engineering" and Year is 2017

A

Abdul Awal, A.S.M. and Wan Ibrahim, Mohd Haziman and Mohd Ali, Ahmad Zurisman and Hossain, M. Zakaria (2017) Mechanical properties and thermal behaviour of two-stage concrete containing palm oil fuel ash. International Journal of GEOMATE, 12 (32). pp. 166-175. ISSN 2186-2990

Abdul Samad, Abdul Aziz and Ali, Noorwirdawati and Mohamad, Noridah and Jayaprakash, J. and Kong, Fah Tee and Mendis, Priyan (2017) Shear strengthening and shear repair of 2-span continuous RC beams with CFRP strips. Journal of Composites for Construction, 21 (3). ISSN 1090-0268

Abdulameer Hussein, Ahmed and Putra Jaya, Ramadhansyah and Abdul Hassan, Norhidayah and Yaacob, Haryati and Huseien, Ghasan Fahim and Wan Ibrahim, Mohd Haziman (2017) Performance of nanoceramic powder on the chemical and physical properties of bitumen. Construction and Building Materials, 156. pp. 496-505. ISSN 0950-0618

Adeleke, A.O. and Ab. Latiff, Ab Aziz and Al-Gheethi, A.A. and Daud, Zawawi (2017) Optimization of operating parameters of novel composite adsorbent for organic pollutants removal from POME using response surface methodology. Chemosphere, 174 (NIL). pp. 232-242. ISSN 0045-6535

Ahmad, Kabiru Abdullahi and Abdullah, Mohd Ezree and Abdul Hassan, Norhidayah and Ahmad Daura, Hussaini and Ambak, Kamarudin (2017) A review of using porous ashalt pavement as an alternative to conventional pavement in stormwater treatment. World Journal of Engineering, 14 (5). pp. 355-362. ISSN 1708-5284

Alias, Ahmad Rizal (2017) Model ramalan permintaan perumahan mengikut kategori rumah di negeri Johor. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Asan, Amran (2017) Accident causation model for building construction sites. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

B

Batari, Ahmad and Aman, Mohamad Yusri and Saeed, Saeed Modibbo and Ahmed, Tijjani Yero (2017) Rutting assessment of crumb rubber modifier modified warm mix asphalt incorporating warm asphalt additive. International Research Journal of Engineering and Technology (IRJET), 4 (2). pp. 1239-1244. ISSN 2395-0072

D

Doraisamy, Sanitha V. (2017) Abandoned project restoration model (APRM) for residential construction projects. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

H

Hassen, Douread R. and Abdul Samad, Abdul Aziz and A. Azeez, Alyaa (2017) Strengthening of prism beam by using NSM technique with roots planted in concrete. International Journal of Engineering and Technology, 9 (5). pp. 383-386. ISSN 0975-4024

L

Lee, Yee Yong and Md Din, Mohd Fadhil and Ponraj, Mohanadoss and Noor, Zainura Zainon and Kenzo, Iwao and Chelliapan, Shreeshivadasan (2017) Overview of urban heat island (UHI) phenomenon towards human thermal comfort. Environmental Engineering and Management Journal, 16 (9). pp. 2097-2111. ISSN 1582-9596

M

Madun, Aziman and Wijeyesekera, Devapriya Chitral and Ahmad Tajuddin, Saiful Azhar and Zainalabidin, Mohd Hazreek and Yunus, Riduan and Tajul Baharudin, Mohamad Faizal (2017) Characterisation of lateral and vertical subsurface heterogeneity in the ground using sustainable seismic surface wave methodology. Journal of Physics: Conference Series, 25 (NIL). pp. 169-176. ISSN 1742-6588

Mangi, Sajjad Ali and Jamaluddin, Norwati and Wan Ibrahim, Mohd Haziman and Mohamad, Noridah and Sohu, Samiullah (2017) Utilization of sawdust ash as cement replacement for the concrete production: a review. Engineering Science Technology International Research Journal (ESTIRJ), 1 (3). pp. 11-15. ISSN 2521-5027

Mat Saman, Nor Sarwani (2017) Assessing low thermal conductivity of bricks which contain rice husk, corn cob and waste tea as an additive material. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Migat Omer, Megat Mohamad Zamer (2017) Influence of ureolytic bacteria (UB) on the engineering properties and microstructure behavior of interlocking compressed earth bricks (ICEB). Masters thesis, Universiti Tun Hussein Onn Malaysia.

Misnon, Noor Aina and Che Osmi, Siti Khadijah and Shahidan, Shahiron and Chouw, N. (2017) Influence of coir random fibre length on concrete: mechanical properties. Malaysian Construction Research Journal, 22 (2). pp. 47-58. ISSN 1985-3807

Mohamad, Noridah and Goh, Wan Inn and Abdullah, Redzuan and Abdul Samad, Abdul Aziz and Mendis, Priyan and Sofi, Massoud (2017) Structural performance of FCS wall subjected to axial load. Construction and Building Materials, 134. pp. 185-198. ISSN 0950-0618

Mohamad, Noridah and Goh, Wan Inn and Samad, A.A.A. and Lockman, A. and Hadipramana, Josef (2017) Structural behaviour of beam with HDPE plastic balls subjected to flexure load. Materials Science Forum, 889 (NIL). pp. 270-274. ISSN 0255-5476

Mohd Ali, A.Z. and Sanjayan, Jay and Guerrieri, Maurice (2017) Performance of geopolymer high strength concrete wall panels and cylinders when exposed to a hydrocarbon fire. Construction and Building Materials, 137. pp. 195-207. ISSN 0950-0618

Mohd Nawi, Mohd Nasrun and Deraman, Rafikullah and Bamgbade, Jibril Adewale and Zulhumadi, Faisal and Mehdi Riazi, Salman Riazi (2017) E-Procurement in Malaysian construction industry: benefits and challenges in implementation. International Journal of Supply Chain Management, 6 (1). pp. 209-213. ISSN 2051-3771

Musa, S. and Abu Mansor, N.A. A. and Bujang, S. S. and Mohd Kamil, N. A. F. and Adnan, M. S. and Hamdan, R. (2017) Potential study of water extraction from selected plants. MATEC Web of Conferences, 103 (04023). pp. 1-7. ISSN 2261-236X

N

Nemmang, Mohd Shafie (2017) Development of vehicle lane changing model within u-turn facilities. Masters thesis, Universiti Tun Hussein Onn Malaysia.

R

Rahmat, Siti Nazahiyah and Jayasuriya, Niranjali and Bhuiyan, Muhammed (2017) Identification of homogeneous areas for drought frequency analysis. International Journal of Integrated Engineering, 9 (2). pp. 18-26. ISSN 2229-838X

S

Salim, Salman and Mat Nor, Ahmad Hakimi and Sanik, Mohd Erwan and Osman, Mohammad Hairi and Abdullah, Mohd Sufyan and Sarif, Abd Sukor and Kumil, Jenylex (2017) Bolts connection technique of bamboo in construction work. IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE), 14 (4). pp. 54-60. ISSN 2320-334X

Soon, C. K. and Zaini, Z. and Mohd Ujang, A. and Nagapan, S. and Abdullah, A. H. and Hasmori, M. F. and Rassiah, K. (2017) A case study of green building in Malaysia: cost saving analysis. Pertanika Journal of Science & Technology, 25 (S). pp. 191-196. ISSN 0128-7680

Subramaniam, Menega (2017) Comparative study on indoor fungi growth incorporated with different antifungal and wall finishings. Masters thesis, Universiti Tun Hussein Onn Malaysia.

W

Wijeyesekera, Devapriya Chitral and Ratha, Nurvin and Lim, Alvin John Meng Siang (2017) Critique on the conceptual developments of innovative practices with lightweight fills. MATEC Web of Conferences, 103 (07015). pp. 1-8. ISSN 2261-236X

Y

Yeo, S.W. and Ling, Felix Ngee Leh and Low, V. S. and Toh, K. L. (2017) Physico-chemical properties of Kaolin-organic acid. MATEC Web of Conferences, 103 (07012). pp. 1-6. ISSN 2261-236X

Z

Zhang, Wen and Ahmad Termida, Nursitihazlin and Susilo, Yusak O (2017) What construct one’s familiar area? A quantitative and longitudinal study. Environment and Planning B: Urban Analytics and City Science. pp. 1-19. ISSN 2399-8083