UTHM Institutional Repository

Items where Division is "Faculty of Mechanical and Manufacturing Engineering > Department of Engineering Mechanics" and Year is 2015

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type | No Grouping
Number of items: 25.

Article

Abd Rahman, Ramhuzaini and Liang, He and Sepehri, Nariman (2015) Design and experimental study of a dynamical adaptive backstepping–sliding mode control scheme for position tracking and regulating of a low-cost pneumatic cylinder. International Journal of Robust and Nonlinear Control, 26 (4). pp. 853-875.

Araby, Sherif and Meng, Qingshi and Zhang, Liqun and Zaman, Izzuddin and Majewski, Peter and Ma, Jun (2015) Elastomeric composites based on carbon nanomaterials. Nanotechnology, 26. pp. 1-23. ISSN 09574484

Ismail, Al Emran and Che Abdul Aziz, Mohd Aswadi (2015) Tensile strength of woven yarn kenaf fiber reinforced polyester composites. Journal of Mechanical Engineering and Sciences (JMES), 9. pp. 1695-1704. ISSN 2289-4659

Siswanto, Waluyo Adi and Nagentrau, M. and Mohd Tobi, Abd Latif and Tamin, M. N. (2015) Contact pressure prediction comparison using implicit and explicit finite element methods and the validation with hertzian theory. International Journal of Mechanical & Mechatronics Engineering, 15 (6). pp. 1-8. ISSN 2227-2771

Siswanto, Waluyo Adi and Nagentrau, M. and Mohd Tobi, Abdul Latif (2015) Prediction of residual stress using explicit finite element method. Journal of Mechanical Engineering and Sciences (JMES), 9 (Dec). pp. 1556-1570. ISSN 2289-4659

Conference or Workshop Item

Abdullah, N.A.Z. and Sani, M.S.M. and Rahman, M.M. and Zaman @ Bujang, Izzuddin (2015) A review on model updating in structural dynamics. In: International Conference on Mechanical Engineering Research (ICMER), 18-19 August 2015, Kuantan, Pahang.

Ali, M. H. and Azmir, Nor Azali and Ghazali, Mohd Imran and Yahya, Musli Nizam (2015) Predicting hand grip strength of hand held grass cutter workers : neural network vs regression. In: 2nd International Materials, Industrial & Manufacturing Engineering Conference (MIMEC 2015), 4-6 February 2015, Bali Nusa Dua Convention Center, Bali, Indonesia.

Hassan, A. and Md Salleh, Salihatun and Jafferi, Noormaziah (2015) The effects of sodium hydroxide content on mechanical and physical properties of rice straw paper. In: International Engineering Research and Innovation Symposium 2015 (IRIS), 12–13 September 2015, Putrajaya, Malaysia.

Ibrahim, Mohd Halim Irwan and Abdul Razak, M.I. and Selamat, M.A. and Mustafa, N. (2015) Carbon-copper (C-Cu) composites using local carbon material through warm compaction process for potential electrical and electronic applications. In: International Engineering Research and Innovation Symposium 2015 (IRIS), 12–13 September 2015, Putrajaya, Malaysia.

Ibrahim, Mohd Halim Irwan and Mohd Amin, Azriszul and Wahab, Md Saidin and Asmawi, Rosli and Mustafa, N. (2015) Solvent debinding variables on leaching fat, oil and grease (FOG) derivatives of green part stainless steel SS316L metal injection moulding. In: 2015 International Symposium on Technology Management and Emerging Technologies (ISTMET), 25-27 August 2015, Langkawi, Kedah, Malaysia.

Ibrahim, Mohd Halim Irwan and Mustafa, N. and Mohd Amin, Azriszul and Asmawi, Rosli (2015) Processability study of natural hydroxyapatite and SS316L via metal injection molding. In: 2015 International Symposium on Technology Management and Emerging Technologies (ISTMET), 25-27 August 2015, Langkawi, Kedah, Malaysia.

Ismail, Al Emran and Che Abdul Aziz, M.A. (2015) Fatigue strength of woven kenaf fiber reinforced composites. In: International Conference on Mechanical Engineering Research (ICMER), 18-19 August 2015, Kuantan, Pahang.

Ismon, Maznan and Zaman @ Bujang, Izzuddin and Ng, Chee Seng (2015) Thermography analysis on welding defects and internal erosion of carbon steel pipeline. In: International Engineering Research and Innovation Symposium 2015 (IRIS), 12–13 September 2015, Putrajaya, Malaysia.

Jamian, Saifulnizan and Yutiman, Safwan and Hehsan, Haffidzudin (2015) AI LM6 hollow cylinder fabricated using centrifugal casting. In: International Engineering Research and Innovation Symposium 2015 (IRIS 2015), 12–13 September 2015, Putrajaya, Malaysia.

Jamian, Saifulnizan and Yutiman, Safwan and Hehsan, Haffidzudin (2015) AL LM6 hollow cylinder fabricated using centrifugal casting. In: International Engineering Research and Innovation Symposium (IRIS 2015), 12–13 September 2015, Putrajaya, Malaysia.

Manshoor, Bukhari and Khalid, Amir and Ibrahim, Nor Afizah and Zaman @ Bujang, Izzuddin (2015) Flow visualization of bubble structure in bubble column reactor for fluid mixing. In: International Engineering Research and Innovation Symposium 2015 (IRIS), 12–13 September 2015, Putrajaya, Malaysia.

Mohd Tobi, Abdul Latif and Zaman @ Bujang, Izzuddin and Ismail, Al Emran (2015) A review on carbon nanotubes reinforced ceramic composite. In: International Engineering Research and Innovation Symposium 2015 (IRIS), 12–13 September 2015, Putrajaya, Malaysia.

Ngali, Mohd Zamani and Abdul Razak, S. and Daud, N. A. and Md Salleh, Salihatun and Siswanto, Waluyo Adi (2015) Inlet-outlet arrangement effects on ice bath cooling system for athlete's injury recovery procedure. In: International Engineering Research and Innovation Symposium (IRIS 2015), 12–13 September 2015, Putrajaya, Malaysia.

Salleh, Muhammad Mohamed and Zaman @ Bujang, Izzuddin (2015) Modification of vibrating thin walled structure using dynamic vibration absorber. In: International Engineering Research and Innovation Symposium 2015 (IRIS), 12–13 September 2015, Putrajaya, Malaysia.

Zahari, S.N. and Zakaria, A.A.R. and Sani, M.S.M. and Bujang @ Zaman, Izzuddin (2015) A review on model updating of joint structure for dynamic analysis purpose. In: International Conference on Mechanical Engineering Research (ICMER), 18-19 August 2015, Kuantan, Pahang.

Zaman, Izzuddin and Abdurasad, Mohd Rajim and Manshoor, Bukhari and Khalid , Amir and Mohd Sani, Mohd Shahrir (2015) Study on dynamic behaviour of grass trimmer using finite element analysis. In: International Conference on Applications and Design in Mechanical Engineering 2015, 30-31 March 2015, Georgetown, Penang.

Zaman, Izzuddin and M. Nor, Fethma and Manshoor, Bukhari and Khalid , Amir and Araby, Sherif (2015) Influence of interface on epoxy/clay nanocomposites: 1. Morphology structure. In: International Materials, Industrial, and Manufacturing Engineering Conference (MIMEC), 4-6 February 2015, Bali, Indonesia.

Zaman, Izzuddin and M. Nor, Fethma and Manshoor, Bukhari and Khalid , Amir and Araby, Sherif (2015) Influence of interface on epoxy/clay nanocomposites: 2. Mechanical and thermal dynamic properties. In: International Materials, Industrial, and Manufacturing Engineering Conference (MIMEC), 4-6 February 2015, Bali, Indonesia.

Zaman, Izzuddin and Manshoor, Bukhari and Khalid , Amir (2015) Study of vibration absorbers using epoxy reinforced natural fibers. In: International Conference on Applications and Design in Mechanical Engineering 2015, 30-31 March 2015, Georgetown, Penang.

Book

Ismail, Al Emran (2015) Retak pada silinder padu. Penerbit UTHM. ISBN 978-967-0764-23-8

This list was generated on Sat Jun 6 16:58:58 2020 +08.