UTHM Institutional Repository

Items where Division is "Faculty of Mechanical and Manufacturing Engineering > Department of Materials Engineering and Design" and Year is 2014

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type | No Grouping
Number of items: 73.

Ab Manaf, Nur Suliani and Ahmad, Sufizar and Ibrahim, Rosziati and Kamdi, Z. and Ismail, A. (2014) Producing of cobait chromium molybdenum (CoCrMo) foam by replication method. In: International Conference on X-Ray & Related Technique in Research and Industry (ICXRI2014), 11-13 August 2014 , Johor Bahru, Johor.

Abdullah, Hasan Zuhudi and Lee, Te Chuan and Idris, Maizlinda Izwana and Charles, Christopher Sorrell (2014) Effect of current density on anodised titanium in mixture of pglycerophosphate (P-GP) and calcium acetate (CA). In: International Conference on X-Ray & Related Technique in Research and Industry (ICXRI2014), 11-13 August 2014 , Johor Bahru, Johor.

Agun, Linda and Abd Rahman, Hamimah and Ahmad, Sufizar and Muchtar, Andanastuti (2014) Influence of binary carbonate on the properties of low temperature cathode composite SOFC. In: International Conference on X-Ray & Related Technique in Research and Industry (ICXRI2014), 11-13 August 2014 , Johor Bahru, Johor.

Agun, Linda and Abu Bakar, Muhammad Subri and Ahmad, Sufizar and Andanastuti, Muchtar and Abd Rahman, Hamimah (2014) Influence of Ag on the chemical and thermal compatibility of LSCF-SDCC for LT-SOFC. In: International Integrated Engineering Summit (IIES 2014), 1-4 December 2014, Universiti Tun Hussein Onn Malaysia, Johor.

Ahmad, Sufizar and Bakar, M. S. A. and Rahman, H. A. and Basri, Hatijah and Mukhtar, Affidah Mardziah (2014) XRD and EDS analysis of composite cathode powders LSCF-SDCC-Ag for low temperature solid oxide fuel cells (LTSOFC). In: International Conference on X-Ray & Related Technique in Research and Industry (ICXRI2014), 11-13 August 2014, Johor Bahru, Johor.

Ahmad, Sufizar and Muhamad, N. and Muchtar, Andanastuti and Sahari, J. and Jamaludin, K. R. and Ibrahim , Mohd Halim Irwan and Mohamad Nor, N. H. (2014) Influence of composition and sintering temperature on density for pure and titanium alloy foams. Jurnal Teknologi, 68 (4). pp. 83-86. ISSN 2180-3722

Ahmad, Sufizar and Halim, N.H. and Taib, Hariati and Harun, Zawati (2014) Effect of sintering temperature on the physical properties of titania-alumina-silver nitrate foam. Applied Mechanics and Materials , 465.

Ahmad Fara, Ahmad Norman Khalis and Yahya, Mohd Azha and Abdullah, Hasan Zuhudi (2014) Preparation and characterization of biological Hydroxyapatite (HAp) obtained from tilapia fish bone. In: International Conference on X-Ray & Related Technique in Research and Industry (ICXRI2014), 11-13 August 2014 , Johor Bahru, Johor.

Ainuddin, Ainun Rahmahwati and Husin, R. and Noorsyakir, S. Y. M. and Rosley, R. A. (2014) Calcinations effect on growth of zinc oxide films prepared via dip-coating technique. In: International Conference on X-Ray & Related Technique in Research and Industry (ICXRI2014), 11-13 August 2014 , Johor Bahru, Johor.

Aminudin, Nurul Nabilah and Basri, Hatijah and Yunos, Muhammad Zaini and Harun, Zawati and Goh, Pei Sean (2014) Effect of pH on Bovine Serum Albumin (BSA) solution to polysulfone-based membrane. Jurnal Teknologi, 70 (2). pp. 77-79. ISSN 21803722

Azlan , Mohd Azwir and Ismail, Al Emran (2014) Effect of mechanical mismatch on the stress intensity factors of inclined cracks under mode I tension loading. In: International Integrated Engineering Summit (IIES 2014), 1-4 December 2014, Universiti Tun Hussein Onn Malaysia, Johor.

Azlan , Mohd Azwir and Buja, Andy Anak and Sia, Chee Kiong and Muhd Nor, Nik Hisyamudin and Azlis-Sani, Jalil (2014) Decision making of screw manufacturing for the best environmental and economic combination by using AHP. Applied Mechanics and Materials , 465. pp. 1065-1069. ISSN 1660-9336

Azmi, Mohd Azham and Yahya, S. M. and Ahmad, Sufizar and Taib, Hariati (2014) Tensile behaviour and fracture characteristics of polydimethylsiloxane (PDMS) filled silica composites. In: International Conference on X-Ray & Related Technique in Research and Industry (ICXRI2014), 11-13 August 2014, Johor Bahru, Johor.

Bakar, M. Subri A. and Ahmad, Sufizar and Abd Rahman, Hamimah and Basri, Hatijah and A., Muchtar (2014) EDS and TG analysis of composite cathode powders LSCF-SDCC for low temperature solid oxide fuel cells (LTSOFC). In: International Integrated Engineering Summit (IIES 2014), 1-4 December 2014, Universiti Tun Hussein Onn Malaysia, Johor.

Feriyanto, Dafit and Idris, Maizlinda Izwana and Sebayang, Darwin (2014) Effect of Cr to Fe on the solid solubility, lattice parameter and strain of Fe80Cr20 alloy powder. Applied Mechanics and Materials, 660. pp. 280-284. ISSN 1662-7482

Feriyanto, Dafit and Idris, Maizlinda Izwana and Sebayang, Darwin (2014) Effect of Cr to Fe on the solid solubility, lattice parameter and strain fabrication of Fe80Cr20 alloy powder. In: International Conference on X-Ray & Related Technique in Research and Industry (ICXRI2014), 11-13 August 2014 , Johor Bahru, Johor.

Feriyanto, Dafit and Idris, Maizlinda Izwana and Sebayang, Darwin (2014) The effect of ultrasonic treatment on the oxidation resistance and microstructure of Fe80Cr20 alloy powder at high temperature oxidation process. In: International Conference on X-Ray & Related Technique in Research and Industry (ICXRI2014), 11-13 August 2014, Johor Bahru, Johor.

Harun, Zawati and Hubadillah, Sitikhadijah and Hasan, Sulaiman and Yunos, Muhamad Zaini (2014) Effect of thermodynamic properties on porosity of ceramic membrane prepared by phase inversion. Applied Mechanics and Materials, 575. pp. 31-35. ISSN 16627482

Harun, Zawati and Kamarudin, Noor Hasliza and Ibrahim, Mustaffa and Idris, Maizlinda Izwana and Ahmad, Sufizar (2014) Reinforced green ceramic shell mould for investment casting process. In: International Conference on X-Ray & Related Technique in Research and Industry (ICXRI2014), 11-13 August 2014 , Johor Bahru, Johor.

Harun, Zawati and Shohur, Muhamad Fikri and Jamalludin, Mohd Riduan and Yunos, Muhamad Zaini and Basri, Hatijah (2014) Hydrophilicity effect of rice husk silica on mixed matrix PSF membrane properties. Jurnal Teknologi, 70 (2). pp. 15-18. ISSN 21803722

Harun, Zawati and Shohur, Muhamad Fikri and Jamalludin, Mohd Riduan and Yunos, Muhamad Zaini and Basri, Hatijah (2014) Hydrophilicity effect of rice husk silica on mixed matrix PSF membrane properties. Jurnal Teknologi, 70 (2). pp. 15-18. ISSN 21803722

Harun, Zawati and Tee , Tze Kiong (2014) Comparative studies of heat and mass transfer by convective and microwave-convective drying for nonhygroscopic ceramic. Australian Journal of Basic & Applied Science, 8 (15). pp. 218-225. ISSN 19918178

Harun, Zawati and Tze, Ching Ong and Ahmad, Rosli (2014) Drying comparison of nonhygroscopic and hygroscopic materials. Applied Mechanics and Materials, 456. pp. 637-641. ISSN 16627482

Harun, Zawati and Tze, Ching Ong and Ahmad, Rosli (2014) Estimation of water desorption in drying of membrane structure system. Advanced Materials Research, 1004. pp. 405-408. ISSN 16628985

Harun, Zawati and Tze, Ching Ong and Ismail, Ahmad Fauzi (2014) Simulation of drying for multilayer membranes. Jurnal Teknologi, 69 (9). pp. 107-115. ISSN 21803722

Hubadillah, Siti Khadijah and Harun, Zawati and Aminudin, Nurul Nabilah and Rosman, Nurafiqah (2014) Ceramic membrane surface roughness induced by modified phase inversion: the effect of thermodynamic properties. Australian Journal of Basic and Applied Sciences, 8 (15). pp. 233-240. ISSN 19918178

Hubadillah, Siti Khadijah and Harun, Zawati and Aminudin, Nurul Nabilah and Rosman, Nurafiqah (2014) Ceramic membrane surface roughness induced by modified phase inversion: the effect of thermodynamic properties. In: International Conference on Material, Mechatronics, Manufacturing and Mechanical Engineering (ICMMMM 2014), 24-25 October 2014, Kuching, Sarawak, Malaysia.

Hussin, Rosniza and Kwang-Leong, Choy and Xiang , Hui Hou (2014) Fabrication of multilayer ZnO/Ti02/Zn0 thin films with enhancement of optical properties by atomic layer deposition (ALD). Applied Mechanics and Materials , 465 (2).

Hussin, Rosniza and Kwang-Leong, Choy and Xiang , Hui Hou (2014) The effect of substrate on Ti02 thin films deposited by atomic layer deposition (ALD). In: International Conference on X-Ray & Related Technique in Research and Industry (ICXRI2014), 11-13 August 2014, Johor Bahru, Johor.

Ibrahim, Mustaffa and Hafsa, M. N. (2014) Dimensional accuracy of additive manufacturing model with different internal structure for investment casting implementation. In: International Integrated Engineering Summit (IIES 2014), 1-4 December 2014, Universiti Tun Hussein Onn Malaysia, Johor.

Ibrahim, Siti Aida and Sreekantan, Srimala (2014) Effect of Fe incorporation on the photocatalytic activity of Ti02 by Sol-Gel Method. In: International Conference on X-Ray & Related Technique in Research and Industry (ICXRI2014), 11-13 August 2014 , Johor Bahru, Johor.

Ismail, Azzura (2014) Corrosion behavior of WC-Co in high sulphate content. In: 4th International Conference on Key Engineering Materials (ICKEM 2014) , 22-23 March 2014, Bali, Indonesia .

Ismail, Azzura (2014) Corrosion behavior of austenitic stainless steel in high sulphate content. Advanced Materials Research, 893. pp. 397-401. ISSN 1022-6680

Ismail, Azzura (2014) The corrosion attack on stainless steel 316L and WC-Co in high sulphate-chloride ratio. In: International Conference on X-Ray & Related Technique in Research and Industry (ICXRI2014), 11-13 August 2014, Johor Bahru, Johor.

Ismail, Azzura and Abd Aziz, Norhaslina (2014) Corrosion behavior of WC-Co and WC-Ni in 3.5% NaCl at increasing temperature. Applied Mechanics and Materials, 660. pp. 135-139. ISSN 1662-7482

Ismail, Azzura and Ahmad Fuad, M. F. (2014) Effect of immersion and green inhibitor to corrosion rate of carbon steel. In: International Conference on X-Ray & Related Technique in Research and Industry (ICXRI2014), 11-13 August 2014 , Johor Bahru, Johor.

Ismail, Azzura and Mat Nawi, A. N. (2014) Banana trunk as green corrosion inhibitor for carbon steel in subsea applications. In: International Conference on X-Ray & Related Technique in Research and Industry (ICXRI2014), 11-13 August 2014 , Johor Bahru, Johor.

Ismail, Azzura and Mohd Tajuddin, M. A. (2014) Banana peel as green corrosion inhibitor for stainless steel 304. In: International Conference on X-Ray & Related Technique in Research and Industry (ICXRI2014), 11-13 August 2014 , Johor Bahru, Johor.

Ismail, N. A. A. and Azmi, Mohd Azham and Ahmad, Sufizar and Mohd Taib, Hariati (2014) Effect of rice husk firing temperature on synthesis of silica (Si02). In: International Conference on X-Ray & Related Technique in Research and Industry (ICXRI2014), 11-13 August 2014 , Johor Bahru, Johor.

Jaibee, Shafizan and Abd Rahim, Abdul Khalil and Mohamad, Fariza and Jamian, Saifulnizan and Yokoyama, Seiji and Muhd Nor, Nik Hisyamudin (2014) Review on current status of waste electric and electronic product in Malaysia. In: International Integrated Engineering Summit (IIES 2014), 1-4 December 2014, Universiti Tun Hussein Onn Malaysia, Johor.

Kamardin, I. L. K. and Ainuddin, Ainun Rahmahwati (2014) Study on optimum low temperature for ZnO formation via hot water treatment. In: International Conference on X-Ray & Related Technique in Research and Industry (ICXRI2014), 11-13 August 2014 , Johor Bahru, Johor.

Kamdi, Zakiah and Phang, C.Y. and Ahmad, Herlin (2014) Corrosion behavior of WC-Co cermet coatings. In: International Conference on Functional Materials and Metallurgy (ICoFM 2014), 17-18 September 2014, Penang, Malaysia.

Kamdi, Zakiah and Voisey, K. T. (2014) Characterization of WC-Co coatings corrosion product by raman spectroscopy. In: International Conference on X-Ray & Related Technique in Research and Industry (ICXRI2014), 11-13 August 2014 , Johor Bahru, Johor.

Lee, Guang Beng and Omar, Badrul (2014) A sustainable product realization strategy using decomposition-based approach. Applied Mechanics and Materials, 660. pp. 1067-1071. ISSN 1662-7482

Lee, Te Chuan and Idris, Maizlinda Izwana and Abdullah, Hasan Zuhudi (2014) Effect of electrolyte concentration on anodised titanium in mixture of B-Glycerophosphate (B-Gp) and Calcium Acetate (Ca). In: International Conference on X-Ray & Related Technique in Research and Industry (ICXRI2014), 11-13 August 2014 , Johor Bahru, Johor.

Mat Nawi, A. and Badarulzaman, Nur Azam (2014) Ceramics pottery fabrication using Plaster of Paris as filler: effect of particle size distribution on porosity and modulus of rupture. In: International Conference on X-Ray & Related Technique in Research and Industry (ICXRI2014), 11-13 August 2014 , Johor Bahru, Johor.

Mat Rosip, Noor Idayu and Ahmad, Sufizar and Jamaluddin, K. R. and Mat Noor, Fazimah and Mohd Taib, Hariati (2014) Morphological analysis of SS316L foam produced by using slurry method. In: International Conference on X-Ray & Related Technique in Research and Industry (ICXRI2014), 11-13 August 2014 , Johor Bahru, Johor.

Mohd Hatta, Mohamed Nasrul and Kenji, Nagata and Takahashi, Kiyohisa (2014) Improvement on mechanical and dynamic properties of palm Fiber/Pla composites by fiber treatment. In: International Conference on X-Ray & Related Technique in Research and Industry (ICXRI2014), 11-13 August 2014 , Johor Bahru, Johor.

Mohd Turan, Faiz and Omar, Badrul (2014) Design evaluation method for design engineer in manufacturing industries using integrated rough-grey analysis approach. Applied Mechanics and Materials, 660. pp. 1052-1056. ISSN 1662-7482

Mokhtar, Mohd Faiz and Omar, Badrul and Muhd Nor, Nik Hisyamudin (2014) Recyclability index based on supply chain management: a review of literature. In: International Integrated Engineering Summit (IIES 2014), 1-4 December 2014, Universiti Tun Hussein Onn Malaysia, Johor.

Ng, Kei Hoa and Abdullah, Hasan Zuhudi (2014) Preliminary studies of the effects of polyethylene glycol/hydroxyapatite powder system for 3D printing application. In: International Conference on X-Ray & Related Technique in Research and Industry (ICXRI2014), 11-13 August 2014 , Johor Bahru, Johor.

Rafter, M. F. M. and Ahmad, Sufizar and Ibrahim, R. and Hussin, R. (2014) Development of stainless steel (SS316L) foam with different composition using compaction method. In: International Conference on X-Ray & Related Technique in Research and Industry (ICXRI2014), 11-13 August 2014 , Johor Bahru, Johor.

Rosman, Nurafiqah and Harun, Zawati (2014) Effects of hydrothermal duration on synthesized zeolite rice husk particles. In: International Conference on X-Ray & Related Technique in Research and Industry (ICXRI2014), 11-13 August 2014, Johor Bahru, Johor.

Rosman, Nurafiqah and Harun, Zawati and Jamalludin, Mohd Riduan (2014) The characteristic of synthesized zeolite rice husk particles via different routes. Jurnal Teknologi, 69 (9). pp. 127-130. ISSN 21803722

Rosman, Nurafiqah and Harun, Zawati and Wahab, Md Saidin and Hubadillah, Siti Khadijah and Aminudin, Nurul Nabilah (2014) Phase transformation of rice husk ash in the synthesis of NaY Zeolite: effect of ageing in short crystalline duration. Australian Journal of Basic and Applied Sciences, 8 (15). pp. 152-159. ISSN 19918178

Rosman, Nurafiqah and Harun, Zawati and Wahab, Md Saidin and Hubadillah, Siti Khadijah and Aminudin, Nurul Nabilah (2014) Phase transformation of rice husk ash in the synthesis of NaY zeolite: effect of ageing in short crystalline duration. Australian Journal of Basic and Applied Sciences, 8 (15). pp. 152-159. ISSN 19918178

Rosman, Nurafiqah and Harun, Zawati and Yunos, Muhamad Zaini and Hasan, Sulaiman (2014) Effect of zeolite synthesized from rice husk silica towards mixed matrix polysulfone ultrafiltration membrane. Jurnal Teknologi, 70 (2). pp. 87-91. ISSN 21803722

Saleh, S. S. and Abdullah, Hasan Zuhudi and Sorrell, C.C. (2014) The anatase formation on anodised titanium in sulphuric acid. In: International Conference on X-Ray & Related Technique in Research and Industry (ICXRI2014), 11-13 August 2014, Johor Bahru, Johor.

Sazali, Norazlianie and Salleh, W. N. W. and Harun, Zawati and Ismail, Ahmad Fauzi (2014) Gas permeation properties and characterization of polymer based carbon membrane. Advanced Materials Research, 983. pp. 246-250. ISSN 16628985

Selimin, Mohamad Ali and Mohd Idrus, Noor Haafiza and Hasan Zuhudi, Abdullah (2014) Anodic oxidation of titanium for biomedical application. In: International Conference on X-Ray & Related Technique in Research and Industry (ICXRI2014), 11-13 August 2014, Johor Bahru, Johor.

Sia, Chee Kiong and Jia, Hang Wu and Muhd Nor, Nik Hisyamudin (2014) Maximum torque of combinations threat for spur gear based on AGMA standard. Applied Mechanics and Materials , 465. pp. 1347-1351. ISSN 1660-9336

Sockalingam, Kanageswary and Yahya, Mohd Azha and Abdullah, Hasan Zuhudi (2014) Preparations of hydroxyapatite from tilapia scales. In: International Conference on X-Ray & Related Technique in Research and Industry (ICXRI2014), 11-13 August 2014 , Johor Bahru, Johor.

Syed Abu Bakar, Sharifah Adzila and Ramesh, S. and Sopyan, I. and Hamdi, M. (2014) Magnesium doped hydroxyapatite through mechanochemical synthesis. In: International Conference on X-Ray & Related Technique in Research and Industry (ICXRI2014), 11-13 August 2014 , Johor Bahru, Johor.

T. Arifin, A. M. and Abdullah, S. and Rafiquzzaman, Md. and Zulkifli, R. and A. Wahab, D. (2014) Failure characterisation in polymer matrix composite for un-notched and notched (open-hole) specimens under tension condition. Fibers and Polymers, 15 (8). pp. 1729-1738. ISSN 18750052

T. Arifin, A. M. and Abdullah, S. and Zulkifli, R. and A. Wahab, D. (2014) Fatigue failures of differences behaviour on CSM/woven roving composite materials. Applied Mechanics and Materials, 471. pp. 335-340. ISSN 16627482

Tajul Arifin, Ahmad Mubarak and Abdullah, Shahrum and Zulkifli, Rozli and Abdul Wahab, Dzuraidah and Rafiquzzaman, Mohammad (2014) Behavior of chopped strand mat and woven roving under bending. Materials Testing, 56 (11-12). pp. 994-1000. ISSN 21958572

Tan, K. J. and Abdullah, Hasan Zuhudi and Idris, Maizlinda Izwana and Sorrell, C.C. (2014) Gel oxidation of titanium at low concentration sodium hydroxide (NaOH). In: International Conference on X-Ray & Related Technique in Research and Industry (ICXRI2014), 11-13 August 2014 , Johor Bahru, Johor.

Wan Muhammad, Wan Nur Azrina and Yoshiharu, Mutoh (2014) Effect of mixing condition on the mechanical properties of magnesium based composites. In: International Conference on X-Ray & Related Technique in Research and Industry (ICXRI2014), 11-13 August 2014 , Johor Bahru, Johor.

Yahya, S. M. and Azmi, A. and Idris, M. I. and Yunos, M. Z. and Mahzan, S. and Ahmad, S. and Taib, H. (2014) Short review: role of metal oxides as filler in polysiloxane sheet composite. Applied Mechanics and Materials, 465. pp. 27-31. ISSN 16627482

Yunos, Muhamad Zaini (2014) Development of polysulfone /silver oxide membranes for separation of natural organic matters. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Yunos, Muhamad Zaini and Harun, Zawati and Basri, Hatijah and Ismail, Ahmad Fauzi (2014) Studies on fouling by natural organic matter (NOM) on polysulfone membranes: effect of polyethylene glycol (PEG). Desalination, 333 (1). pp. 36-44. ISSN 0011-9164

Yunos, Muhamad Zaini and Harun, Zawati and Basri, Hatijah and Taib, Hariati and Ismail, Ahmad Fauzi (2014) Fouling characterization of polysulfone-grafted-methyl methacrylate membrane. Applied Mechanics and Materials, 465. pp. 819-823. ISSN 16627482

Zakaria, M. and Karim, S. R. and Badarulzaman, Nur Azam (2014) XRD analysis of AL-6vol%SnPb composites fabricated by cold forging process with various sintering temperatures. In: International Conference on X-Ray & Related Technique in Research and Industry (ICXRI2014), 11-13 August 2014, Johor Bahru, Johor.

This list was generated on Sun Jun 7 05:31:55 2020 +08.