UTHM Institutional Repository

Items where Division is "Faculty of Mechanical and Manufacturing Engineering > Department of Materials Engineering and Design" and Year is 2015

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type | No Grouping
Jump to: A | H | I | J | K | L | M | N | S | T | W
Number of items: 28.

A

Abd Rahman, Hamimah and Agun, Linda and Ahmad Shah, Mohamed Hakim (2015) Ba- and La- strontium cobalt ferrite carbonate composite as cathode materials for low temperature SOFC. In: 24th Scientific Conference of the Microscopy Society Malaysia (SCMSM 2015), Hotel Avillion, Melaka, Malaysia, 2-4 December 2015.

Abdullah, Muhammad A'imullah and Arjmandy, M. R. and Koloor, S. S. R. and K., J. Wong and Tamin, M. N. (2015) Interlaminar damage behavior of CFRP composite laminates under cyclic shear loading conditions. In: 2nd International Materials, Industrial & Manufacturing Engineering Conference (MIMEC 2015), 4-6 February 2015, Bali Nusa Dua Convention Center, Bali, Indonesia.

Ainuddin, Ainun Rahmahwati and Hashim, M. F. (2015) Hydrothermal synthesis effect on growth of zinc oxide structure. In: 2nd International Materials, Industrial & Manufacturing Engineering Conference (MIMEC 2015), 4-6 February 2015, Bali Nusa Dua Convention Center, Bali, Indonesia.

Ainuddin, Ainun Rahmahwati and Mior Idris, Wan Nur Amalina (2015) Growth OF ZnO nanostructures with different alkaline precursor solution. ARPN Journal of Engineering and Applied Sciences, 11 (12). pp. 7612-7616. ISSN 18196608

Azmi, Mohd Azham and Ismail, S. Hajar and Mahzan, Shahruddin and Ahmad, Sufizar and Mohd Taib, Hariati (2015) Mechanical properties of polydimethylsiloxanes (PDMS) reinforced silica derived rice husk ash. In: Malaysian Polymer International Conference, 10-11 Jun 2015, Palm Garden Hotel, Putrajaya, Malaysia.

H

Harun, Zawati and Tze, Ching Ong (2015) A complete mathematical model of convective drying in membrane fabrication. Chemiical Engiineering Transactiions, 45. pp. 1405-1410. ISSN 22839216

Hassan, Mohd Fahrul and Mat Saman, Muhamad Zameri and Sharif, Safian and Omar, Badrul (2015) Sustainability evaluation of alternative part configurations in product design: weighted decision matrix and artificial neural network approach. Clean Technologies and Environmental Policy. ISSN 1618-954X

I

Idris, M. I. and T., C. Lee and Abdullah, Hasan Zuhudi (2015) Effect of uv light treatment condition on apatite formation of anodised titanium. In: 2nd International Materials, Industrial & Manufacturing Engineering Conference (MIMEC 2015), 4-6 February 2015, Bali Nusa Dua Convention Center, Bali, Indonesia.

Idris, Maizlinda Izwana and T., C. Lee and Abdullah, Hasan Zuhudi (2015) Effect of UV wavelength on apatite formation of anodised titanium. In: 2nd International Materials, Industrial & Manufacturing Engineering Conference (MIMEC 2015), 4-6 February 2015, Bali Nusa Dua Convention Center, Bali, Indonesia.

Ismail, Norhasikin and Abdullah, Hasan Zuhudi (2015) Effects of hydrochloric acid concentration on the properties of black Tilapia fish skin gelatin. In: Seminar on Advanced Materials Characterization Techniques in Research, Industry and Nuclear Applications (AMCT 2015), June 9-10, 2015, Selangor.

J

Jaibee, Shafizan and Muhd Nor, Nik Hisyamudin and Azizul, Muhammad Redzuan and Abd Rahim, Abd Khalil and Mohammad, Fariza and Sia, Chee Kiong and Ahmad@Mohamad, Md Fauzi and Seiji, Yokohama (2015) Effectivity study of waste personal computer through manual dismantling and hydrometallurgical process using leaching process. In: International Engineering Research and Innovation Symposium 2015 (IRIS), 12–13 September 2015, Putrajaya, Malaysia.

K

Kamdi, Zakiah and Voisey, K. T. (2015) Corrosion mechanism of tungsten carbide-based coatings in different aqueous media. In: 24th Scientific Conference of the Microscopy Society Malaysia (SCMSM 2015), Hotel Avillion, Melaka, Malaysia, 2-4 December 2015.

Koh, Ching Theng and Low, Cheng Yee and Yusof, Yusri (2015) Structure-property relationship of bio-inspired fibrous materials. Procedia Computer Science, 76 (2015). pp. 411-416. ISSN 1877–0509

L

Lee, Te Chuan and Rashid, M. H. A. and Selimin, Mohamad Ali and Abdullah, Hasan Zuhudi and Idris, Maizlinda Izwana (2015) Precipitation of hydroxyapatite on pure titanium substrate via single step anodic oxidation. In: 24th Scientific Conference of the Microscopy Society Malaysia (SCMSM 2015), 2-4 December 2015, Hotel Avillion, Melaka, Malaysia.

M

Mohd Rus, Anika Zafiah and Abdullah, Nur Munirah and Abdullah, Mohammad Faiz Liew (2015) Interconnected interface enhanced electrical properties of graphite in bio-based epoxy from insulating to conductor composites. In: International conference on Green Computing and Engineering Technology (ICGCET) 2015, 25-26 July 2015, Dubai, UAE.

Mohd Rus, Anika Zafiah and M. Salim, N. Syamimi and Sapiee, N. Haiza (2015) Recycling of cooking oil waste into reactive polyurethane for blending with thermoplastic polyethylene. International Journal of Polymer Science, 2015. ISSN 1687-9422

Mohd Rus, Anika Zafiah and Mat Hassan, Nik Normunira (2015) Thermal degradation and damping characteristic of UV irradiated biopolymer. International Journal of Polymer Science. ISSN 1687-9422

N

Natrah, Siti and Hussin, Rosniza and Taib, Hariati and Ahmad, Sufizar and Abd Rahman, Hamimah and Hanapi, lkhmal and Mat Kasa, Nassari (2015) Investigate suitable slnterlng temperature to produce claytan porcelain ceramic with addition of feldspar. In: International Conference on Knowledge Transfer (ICKT 2015), 1-3 December 2015, Putrajaya, Malaysia.

S

Saleh, S. S. and Abdullah, Hasan Zuhudi (2015) Optimization and characterization of anatase formed on anodized titanium in sulfuric acid. In: 2nd International Materials, Industrial & Manufacturing Engineering Conference (MIMEC 2015), 4-6 February 2015, Bali Nusa Dua Convention Center, Bali, Indonesia.

Sazali, Norazlianie and Harun, Zawati and Salleh, W. N. W. and Nordin, N. A. H. and Yousof, N. and Ismail, A. F. (2015) Gas permeation properties of the matrimid based carbon tubular membrane: the effect of carbonization temperature. International Journal of Conceptions on Mechanical and Civil Engineering, 3 (1). pp. 6-9. ISSN 23572760

Selimin, Mohamad Ali and Idris, Maizlinda Izwana and Abdullah, Hasan Zuhudi (2015) Anodic oxidation of titanium in acetic acid for biomedical application. In: 2nd International Materials, Industrial & Manufacturing Engineering Conference (MIMEC 2015), 4-6 February 2015, Bali Nusa Dua Convention Center, Bali, Indonesia.

Sia, Chee Kiong and Hakimi, Syarul (2015) The optimum preparation and the thermal conductivity of novel glossy paint prepared from waste of Palm Oil Fly Ash, POFA composite. In: International Conference on Knowledge Transfer (ICKT 2015), 1-3 December 2015, Putrajaya, Malaysia.

Sia, Chee Kiong and Mohd Nor, S. Hakimi and Ong, Pauline and Che Othman, M. Shaidi (2015) Preparation of paint by using palm oil fly ash, pofa based pigment. In: The 3rd International Conference on Mechanical Engineering Research (ICMER) 2015, 18 – 19 August 2015, The Zenith Hotel, Kuantan.

Sockalingama, K. and Idris, Maizlinda Izwana and Abdullah, Hasan Zuhudi (2015) Effect of pre-treatment conditions on black tilapia fish scales for gelatin extraction. In: 2nd International Materials, Industrial & Manufacturing Engineering Conference (MIMEC 2015), 4-6 February 2015, Bali Nusa Dua Convention Center, Bali, Indonesia.

Syed Abu Bakar, Sharifah Adzila (2015) Effect of zinc doped calcium phosphate through mechanochemical synthesis. In: Advanced Research in Material Sciences, Manufacturing, Mechanical and Mechatronic Engineering Technology international Conference (AR4MET 2015), 2-4 June 2015, Bali, Indonesia.

T

T., C. Lee and Rathi, M. F. M. and Abidin, M. Y. Z. and Abdullah, Hasan Zuhudi and Idris, Maizlinda Izwana (2015) Characterization and in vitro bioactivity of UV-treated anodised titanium. In: 2nd International Materials, Industrial & Manufacturing Engineering Conference (MIMEC 2015), 4-6 February 2015, Bali Nusa Dua Convention Center, Bali, Indonesia.

Tan, K. J. and Mahmod, A. and Wahab, M. A. A. and Idris, Maizlinda Izwana and Abdullah, Hasan Zuhudi (2015) Effect of heat treatment on surface morphology of titanium. In: 2nd International Materials, Industrial & Manufacturing Engineering Conference (MIMEC 2015), 4-6 February 2015, Bali Nusa Dua Convention Center, Bali, Indonesia.

W

Wan Muhammad, Wan Nur Azrina and Abdullah, Muhammad Aminullah (2015) Effect of the amount and particle size of SiC susceptor on the properties of microwave sintered magnesium. In: International Engineering Research and Innovation Symposium 2015 (IRIS), 12–13 September 2015, Putrajaya, Malaysia.

This list was generated on Tue Apr 7 09:42:25 2020 +08.