UTHM Institutional Repository

Items where Division is "Faculty of Mechanical and Manufacturing Engineering > Department of Materials Engineering and Design" and Year is 2016

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type | No Grouping
Number of items: 27.

Ajala, Amkpa Job and Badarulzaman, Nur Azam (2016) Performance assessment of physico-mechanical properties of Aloji fireclay brick. International Journal of Integrated Engineering, 8 (2). pp. 13-15. ISSN 2229838X

Ajala, Amkpa Job and Badarulzaman, Nur Azam (2016) Thermal conductivity of Aloji fireclay as refractory material. International Journal of Integrated Engineering , 8 (3). pp. 16-20. ISSN 2229838X

Azmi, Mohd Azham and Muin @ Marsayid, Mohd Syahmi and Mahzan, Shahruddin and Ahmad, Sufizar and Taib, Hariati (2016) Vibration exposure analysis of polydimethylsiloxane reinforced silica derived rice husk ash. Malaysian Journal Of Analytical Sciences, 20 (5). pp. 1138-1144. ISSN 13942506

Baharom, Syazwani and Ahmad, Sufizar and Taib, Hariati and Abd Rahman, Hamimah and Wan Muhammad, Wan Nur Azrina and Azmi, Mohd Azham (2016) The effects of compositions and sintering temperature on the silica foam fabricated by slurry method. In: The 2nd International Conference on Functional Materials and Metallurgy.

Baharuddin, Nurul Akidah and Muchtar, Andanastuti and Somalu, Mahendra Rao and S. A, Muhammed Ali and Abd Rahman, Hamimah (2016) Influence of sintering temperature on the polarization resistance of La0.6Sr0.4Co0.2Fe0.8O3-δ – SDC carbonate composite cathode. Ceramics - Silikáty, 60 (2). pp. 115-121. ISSN 08625468

Harun, Zawati and Ong, Tze Ching (2016) Dynamic drying variables evolution in membrane structure. In: Drying and Energy Technologies. Advanced Structured Materials (63). Springer International Publishing Switzerland, pp. 131-148. ISBN 9783319197661

Harun, Zawati and Tze, Ching Ong (2016) Dynamic drying variables evolution in membrane structure. In: Advanced Structured Materials. Drying and Energy Technologies, 63 . Springer International Publishing Switzerland, pp. 131-148. ISBN 9783319197661

Harun, Zawati and Yunos, Muhamad Zaini and Yusof, Khairul Nazri and Shohur, Muhamad Fikri and Lau, W. J. and W. Salleh, W. N. (2016) Optimization and characterization of polysulfone membranes made of zinc oxide, polyethylene glycol and eugenol as additives. Journal of Engineering Science and Technology, 11 (7). pp. 1001-1015. ISSN 18234690

Harun, Zawati and Yunos, Muhamad Zaini and Yusof, Khairul Nazri and Shohur, Muhamad Fikri and Lau, W. J. and W. Salleh, W. N. (2016) Optimization and characterization of polysulfone membranes made of zinc oxide, polyethylene glycol and eugenol as additives. Journal of Engineering Science and Technology, 11 (7). pp. 1001-1015.

Hubadillah, Siti Khadijah and Harun, Zawati and Othman, Mohd Hafiz Dzarfan and Ismail, A. F. and Gani, Paran (2016) Effect of kaolin particle size and loading on the characteristics of kaolin ceramic support prepared via phase inversion technique. Journal of Asian Ceramic Societies, 4. pp. 164-177. ISSN 21870764

Hubadillah, Siti Khadijah and Harun, Zawati and Othman, Mohd Hafiz Dzarfan and Ismail, A. F. and Wan Salleh, Wan Norharyati and Basri, Hatijah and Yunos, Muhamad Zaini and Gani, Paran (2016) Preparation and characterization of low cost porous ceramic membrane support from kaolin using phase inversion/sintering technique for gas separation: effect of kaolin content and non-solvent coagulant bath. Chemical Engineering Research and Design, 112. pp. 24-35. ISSN 02638762

Hubadillah, Siti Khadijah and Othman, Mohd Hafiz Dzarfan and Harun, Zawati and Ismail, A. F. and Yuji, Iwamoto and Sawao, Honda and A. Rahman, Mukhlis and Jaafar, Juhana and Gani, Paran and Mohd Sokri, Mohd Nazri (2016) Effect of fabrication parameters on physical properties of metakaolin-based ceramic hollow fibre membrane (CHFM). Ceramics International, 42. pp. 15547-15558. ISSN 02728842

Hubadillah, Siti Khadijah and Othman, Mohd Hafiz Dzarfan and Harun, Zawati and Ismail, A. F. and Yuji, Iwamoto and Sawao , Honda and A. Rahman, Mukhlis and Jaafar, Juhana and Gani, Paran and Mohd Sokri, Mohd Nazri (2016) Effect of fabrication parameters on physical properties of metakaolin-based ceramic hollow fibre membrane (CHFM). Ceramics International, 42 (14). pp. 15547-15558. ISSN 02728842

Hussin, Rosniza and Kwang, Leong Choy and Hou, Xiangui (2016) Deposited TiO2 thin films by atomic layer deposition (ALD) for optical properties. ARPN Journal of Engineering and Applied Sciences, 11 (12). pp. 7529-7533. ISSN 18196608

Ismail, Azzura (2016) Corrosion performance of Inconel 625 in high sulphate content. IOP Conference Series: Materials Science and Engineering, 131. pp. 1-6. ISSN 1757899X

Ismail, N. A. A. and Azmi, Mohd Azham and M, Rizamarhaiza and A. A. K., W. M. Hasif and Taib, Hariati (2016) Characterisation of silica derived from rice husk (Muar, Johor, Malaysia) decomposition at different temperatures. In: The 2nd International Conference on Functional Materials and Metallurgy.

Kormin, Shaharuddin and Mohd Rus, Anika Zafiah (2016) Preparation and characterization of biopolyol from liquefied oil palm fruit waste: part 1. In: 2016 7th International Conference on Manufacturing Science and Technology, 16-18 July 2016, Curtin University Sarawak.

Kormin, Shaharuddin and Mohd Rus, Anika Zafiah (2016) Preparation and characterization of biopolyol from liquefied oil palm fruit waste: part 2. In: 2016 7th International Conference on Manufacturing Science and Technology, 16-18 July 2016, Curtin University Sarawak.

Lee, T. C. and Koshy, P. and Abdullah, H. Z. and Idris, M. I. (2016) Precipitation of bone-like apatite on anodised titaniumin simulated body fluid under UV irradiation. Surface & Coatings Technology, 301. pp. 20-28. ISSN 02578972

M. F. L., Ahraz Sadrina and M. Rus, Anika Zafiah and A. A., N. Quratul and Saadon, Shafizah and S. W. M. R. , W. A. Sharmimi and Md. Y., Siti Nur Khairiah and M. Y. , Yasmin Nur Khalidah and J. , Ilmia Elzahraa and Abdullah, Zaiton (2016) Waste cooking oil of renewable polymer foam composite as sound absorbent materials. In: 2016 International Conference on Applied System Innovation (ICASI), 26-30 May 2016, Okinawa, Japan.

Mat Hassan, Nik Normunira and M. Rus, Anika Zafiah (2016) Thermal and activation energy of renewable polymer after UV irradation. ARPN Journal of Engineering and Applied Sciences, 11 (3). pp. 1510-1514. ISSN 18196608

Mohammad, Siti Fairus and Ahmad, Sufizar and Abdul Rahman, Hamimah and Andanastuti, Muchtar (2016) Diversification studies on samarium strontium cobaltite regarding thermal & structural properties as based composite cathode of SOFC. In: International Conference on X-rays and Related Techniques in Research and Industry 2016 (ICXRI2016), 17-18 August 2016, Putrajaya, Malaysia.

Syed Abu Bakar, S. Adzila and Ramesh, S. and Sopyan, I. (2016) Properties of magnesium doped nanocrystalline hydroxyapatite synthesize by mechanochemical method. ARPN Journal of Engineering and Applied Sciences, 11 (24). pp. 14097-14100. ISSN 18196608

Syed Abu Bakar, Sharifah Adzila and Kanasan, Nanthini and Hassan, Mohd Fahrul and Tajul Arifin, Ahmad Mubarak and Yunos, Muhamad Zaini and Abdol Rahman, Mohd Nasrull and Abdul Haq, Reazul Haq (2016) Synthesis and characterization of magnesium doped calcium phosphate for bone implant application. ARPN Journal of Engineering and Applied Sciences, 11 (14). pp. 8694-8697. ISSN 18196608

Wan Muhammad, Wan Nur Azrina and Abdullah, Muhammad Aminullah (2016) Effect of the amount and particle size of SiC susceptor on the properties of microwave sintered magnesium. ARPN Journal of Engineering and Applied Sciences, 11 (12). pp. 7550-7552. ISSN 18196608

Yusof, Nurul Fariha and Ku Bulat, Ku Halim and Badarulzaman, Nur Azam and Muhamad Nor, Mohd Al Amin (2016) The effect of boron oxide on phosphate ion released from borosilicate glass in seawater. Materials Science Forum, 840. pp. 24-28. ISSN 16629752

Zulkiflee, Nur Syahraain and Hussin, Rosniza and Halim, Jumrah and Ibrahim, Mohd Izham and Zainal, Mohamad Zulhafizi and Nizam, Shahzua and Abdul Rahman, Suhailah (2016) Characterization of TiO2, ZnO, and TiO2/ZnO thin films prepared by sol-gel method. ARPN Journal of Engineering and Applied Sciences, 11 (12). pp. 7633-7637. ISSN 18196608

This list was generated on Sat Jun 6 23:10:34 2020 +08.