UTHM Institutional Repository

Items where Division is "Faculty of Mechanical and Manufacturing Engineering > Department of Manufacturing and Industrial Engineering" and Year is 2009

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type | No Grouping
Jump to: A | G | H | J | L | M | S | W
Number of items: 17.

A

Abd Rahim, Erween and Sharif, Safian (2009) Evaluation of tool wear mechanism of TiAlN coated tools when drilling Ti-6Al-4V. International Journal of Manufacturing Technology and Management, 17 (4). pp. 327-336. ISSN 1368-2148

Abdol Rahman, Mohd Nasrull and Abdul Aziz, Faieza and Mohd Yusuff, Rosnah (2009) Investigation of ergonomic risk factors in a car tyre service centre. In: National Symposium on Advancements in Ergonomics and Safety (ERGOSYM2009), 1-2 December 2009, Perlis, Malaysia.

Abdullah, Abdul Shukor and Abdol Rahman, Mohd Nasrull (2009) Ergonomic assessment of working postures in semiconductor manufacturing processes. In: National Symposium on Advancements in Ergonomics and Safety (ERGOSYM2009), 1-2 December 2009, Perlis, Malaysia.

Alimin, A.J. and Ali, M.F. and Mohd Ali, M.F. and Mohideen Batcha, M.F. and Md Seri, S. and Selamat, H. (2009) Experimental study on the application of fuel injection retrofitment kit for a small gasoline fuelled engine. In: Environmental Science and Technology Conference (ESTEC'09), 7-8 December 2009, Kuala Terengganu, Terengganu.

G

Ginta, Turnad L. and Nurul Amin, A. K. M. and Lajis, Mohd Amri and Karim, A. N. Mustafizul and Mohd Radzi, H. C. D. (2009) Improved tool life in end milling Ti-6Al-4V through workpiece preheating. European Journal of Scientific Research, 27 (3). pp. 384-391. ISSN 1450216X

Ginta, Turnad L. and Nurul Amin, A. K. M. and Mohd Radzi, H. C. D. and Lajis, Mohd Amri (2009) Tool life prediction by response surface methodology in end milling titanium alloy Ti-6Al-4V using uncoated WC-Co inserts. European Journal of Scientific Research, 28 (4). pp. 533-541. ISSN 1450216X

H

Husain, Adnan and Md Yusof, Mohamad Zainal and Zamri Tan, Nurul Zakiah and Mohd Basir, Ishak and Leman, Abdul Mutalib (2009) Measurement of ventilation rates using tracer gas method in walk-in stability chamber. Proceedings - 6th International Symposium on Heating, Ventilating and Air Conditioning, ISHVAC 2009, 2.

Husain, Adnan and Md. Yusof, Mohamad Zainal and Zamri Tan, Nurul Zakiah and Azizi, Baizura Aini and Leman, Abdul Mutalib (2009) Study of ozone emission and IAQ in computer laboratory. Proceedings - 6th International Symposium on Heating, Ventilating and Air Conditioning, ISHVAC 2009, 2. pp. 973-979.

J

Jamaludin, Khairur Rijal and Muhamad, Norhamidi and Ab. Rahman, Mohd Nizam and M. Amin, Sri Yulis and Ahmad, Sufizar and Ibrahim , Mohd Halim Irwan and Murtadhahadi, Murtadhahadi and Mohamad Nor, Nor Hafiez (2009) Moulding parameter optimisation for the best sintered density. In: Proceedings of the World Congress on Engineering 2009, 1-3 July 2009, London.

L

Lajis, Mohd Amri and Mohd Radzi, H. C. D. and Nurul Amin, A. K. M. (2009) The implementation of Taguchi method on EDM process of tungsten carbide. European Journal of Scientific Research, 26 (4). pp. 611-619. ISSN 1450216X

M

M., Hafiz Helmi and M., Azuddin and Wagiman , Abdullah (2009) Investigation of surface roughness and material removal rate (MRR) on tool steel using brass and copper electrode for electrical discharge grinding (EDG) process. International Journal of Integrated Engineering, 1 (1). pp. 31-39. ISSN 1985-854X

Marsudi, Muhammad and Abdul Wahab, Dzuraidah and Che Haron, Che Hasan (2009) The application of spreadsheet model based on queuing network to optimize capacity utilization in product development. International Journal of Integrated Engineering, 1 (1). pp. 41-50. ISSN 1985-854X

Mohammed Shafiee, Mohd Rizuan and Hashim, Mohd Yussni and Said, Mohd Nusyakirin (2009) Effects of gating design on the mechanical strength of thin section castings. In: Malaysian Technical Universities Conference on Engineering and Technology (MUCEET 2009), 20-22 June 2009, Kuantan, Pahang.

S

Sh Ahmad, Sh Saleh (2009) Optimising manufacturing schedule using petri net. Journal of Science and Technology, 1 (1). pp. 27-42. ISSN 1985-8809

W

Wahab, M. S. and Dalgarno, K. W. and Cochrane, R. F. (2009) Development of polymer nanocomposites for rapid manufacturing application. International Journal of Integrated Engineering, 1 (1). pp. 51-59. ISSN 1985-854X

Wahab, Md Saidin (2009) Development of wood base material for rapid prototyping process. Other thesis, Universiti Tun Hussein Onn Malaysia.

Wahab, Md Saidin and Wagiman , Abdullah and Zuki, N. M. (2009) Rapid prototyping of wood-based material. In: Proceedings of MUCEET2009 Malaysian Technical Universities Conference on Engineering and Technology, June 20-22, 2009, MS Garden,Kuantan, Pahang, Malaysia.

This list was generated on Tue Jun 2 23:16:18 2020 +08.