UTHM Institutional Repository

Items where Division is "Faculty of Mechanical and Manufacturing Engineering > Department of Manufacturing and Industrial Engineering" and Year is 2012

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type | No Grouping
Jump to: A | B | C | H | K | M | O | R | S | T | W | Y
Number of items: 25.

A

Abdol Rahman, Mohd Nasrull and Abdul Rani, Mat Rebi and Mohd Rohani, Jafri (2012) Investigation of work-related musculoskeletal disorders in wall plastering jobs within the construction industry. Work: A Journal of Prevention, Assessment & Rehabilitation, 43 (4). ISSN 1051-9815

Ahmad, Rosli and Gethin, D. T. and Lewis, R. W. (2012) Design Element Concept of squeeze casting process. Applied Mathematical Modelling, 36 (10). pp. 4760-4788. ISSN 0307-904X

B

Bareduan , Salleh Ahmad and Hasan, Sulaiman (2012) Methodology to develop heuristic for re-entrant flow shop with two potential dominant machines using bottleneck approach. International Journal of Combinatorial Optimization Problems and Informatics, 3 (3). pp. 81-93. ISSN 20071558

C

Chen, Wong Keong and Yusof, Yusri (2012) Design a system and database for automated machining feature recognition. In: Persidangan Kebangsaan Penyelidikan dan Inovasi Dalam Sistem Pendidikan dan Latihan Teknikal dan Vokasional CiETVET 2012, 25-26 September 2012, Politeknik Nilai, Negeri Sembilan.

Chen , Wong Keong and Yusof, Yusri (2012) Design a system and database for automated machining feature recognition. In: Persidangan Kebangsaan Penyelidikan dan Inovasi Dalam Pendidikan dan Latihan Teknikal dan Vokasional CiE-TVET 2012, 25-26 September 2012, Politeknik Nilai, Negeri Sembilan .

H

Hasnan, Khalid and Saesar, Luhur Budi (2012) Kinematic-dynamic modeling and test control of tracked drive vehicle for indoor mapping. Applied Mechanics and Materials , 148. pp. 1510-1513. ISSN 1660-9336

Hasnan, Khalid and Saesar, Luhur Budi and Herawan, Tutut (2012) A hardware-in-the-loop simulation and test for unmanned ground vehicle on indoor environment. Procedia Engineering, 29. ISSN 18777058

Hasnan, Khalid and Saesar, Luhur Budi and M.S., Ikhmatiar and Herawan, Tutut (2012) JOMS:system architecture for telemetry and visualization on unmanned vehicle. Procedia Engineering, 29. ISSN 18777058

Hasnan, Khalid and Saesar, Luhur Budi and Yudhistira, Prima Adhi (2012) Extend the utilization of joystick for visualization, telemetry and control on unmanned vehicle development. Applied Mechanics and Materials , 148. pp. 442-445. ISSN 1660-9336

Hasnan, Khalid and Saesar, Luhur Budi and Yudhistira, Prima Adhi (2012) A size-bed wheelchair design manufacture with scaled prototype and kinematic-virtual reality model simulation. Advanced Materials Research, 488. pp. 1207-1212.

K

Khairu, K. and Raman, I. and Mohamed, M. A. S. and Ibrahim , Mustafa and Wahab, Md Saidin (2012) Parameter optimerization for photo polymerization of microstereolithography. In: International Conference on Advanced Material Engineering & Technology (ICAMET 2012) , 28-30 November 2012, Penang, Malaysia.

M

Maksud, M. I. and Yusof, Mohd Sallehuddin and Abdul Jamil, Muhammad Mahadi (2012) A study on multiple fine solid lines by flexographic printing in printed antennas for WID (radio frequency identification) transponder: an overview. In: Proceeding of National Conference of Electric and Electronic Engineering 2012, 2012.

Masood, Ibrahim and Hassan, Adnan (2012) Pattern recognition for bivariate process mean shifts using feature-based artificial neural network. International Journal Advanced Manufacturing Technology. ISSN 0268-3768

Md Amin Hamzas, Mohd Fidzwan and Ahmad Bareduan, Salleh and Hussin, M. S. and Hasnul, M. J. and Sanuddin, Asmawi and Zailani, Z. A. (2012) Performance evaluation of M3 bottleneck based heuristic for M1M2M3 flow shop. International Review of Mechanical Engineering, 6 (6). pp. 1253-1256. ISSN 19708734

Md Amin Hamzas, Mohd Fidzwan and Ahmad Bareduan, Salleh and Tajul, Liyana and Hussin, Mohd Sabri and Zainal Abidin, Zailani and Hadi, Hasnul (2012) Development of improved bottleneck-based heuristic for re-entrant flow shop with dominant machine at M1 and M4. International Review of Mechanical Engineering, 6 (3). pp. 501-506. ISSN 19708734

Mohamad, E.J. and Rahim, R.A. and Leow, P.L. and Rahiman, M.H.F. and Marwah, O.M.F. and Ayob, N.M.N. (2012) Visualization of recovered palm oil using portable ECT imager in extraction palm oil process. Flow Measurement and Instrumentation, 31. pp. 61-68. ISSN 09555986

O

Othman , Mohd Hilmi and Shamsudin, Shazarel and Hasan, Sulaiman and Abd Rahman, Mohd Norhafiz (2012) The effects of injection moulding processing parameters and mould gate size towards weld line strength. Advanced Materials Research, 488. pp. 801-805. ISSN 1022-6680

R

Raman, I. and Syafiq, M. and Sa'ude, N. and Ibrahim , Mustafa and Wahab, Md Saidin (2012) Viscosity effect on piezoelectric actuated nozzle in generating micro droplet. In: International Conference on Advanced Material Engineering & Technology (ICAMET 2012) , 28-30 November 2012, Penang, Malaysia.

S

Sabudin , Sulastri and Iu, Ching Lie and Mohamad, Eddy Ezwan (2012) Multi-cutting passes for a fine-cut wire electro discharge machining of stainless steel. Advanced Materials Research, 418. pp. 1288-1293. ISSN 1022-6680

Shamsudin, Shazarel and Phoon, Chee Yoon (2012) Investigation on mechanical properties of pulsed Nd:YAG laser welding on AISI 304 stainless steel to AISI steel. Applied Mechanics and Materials , 117. pp. 402-408. ISSN 1660-9336

T

Thamizhmanii, Sivaprakasam and Rajendran, K. and Rasool Mohideen, S. and Sulaiman, Hasan (2012) Investigation on surface integrity on STAVAX ESR AISI 420 martensitic stainless steel by cryogenically treated steel balls with low plastic burnishing tool. Key Engineering Materials, 504. pp. 1347-1352. ISSN 1662-9795

Thamizhmanii, Sivaprakasam and Rajendran, Punitha and Mohideen, Rasool and Sulaimana, Sulaimana (2012) Performance evaluation of cryogenically treated worn CBN insert by turning process. Key Engineering Materials, 504. pp. 1323-1328. ISSN 1662-9795

Thamizhmanii, Sivaprakasam and Sulaiman, Hasan (2012) Machinability study using chip thickness ratio on difficult to cut metals by CBN cutting tool. Key Engineering Materials, 504. pp. 1317-1322. ISSN 1662-9795

W

Wahab, Md Saidin and Abdul Rahim, Erween and Mustapa, Mohammad Sukri and Abdul Rahman, Norzaina (2012) The effect of laser cutting parameters on the aerospace structure panel of CFRP composite material. Applied Mechanics and Materials, 225. pp. 127-131. ISSN 16627482

Y

Yusof, Yusri and Zamri Tan, Nurul Zakiah (2012) STEP-NC code generator on drilling operations using (GEN-M). Applied Mechanics and Materials , 159. pp. 267-271. ISSN 1660-9336

This list was generated on Tue Jun 2 23:19:17 2020 +08.