UTHM Institutional Repository

Items where Division is "Faculty of Mechanical and Manufacturing Engineering > Department of Manufacturing and Industrial Engineering" and Year is 2015

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type | No Grouping
Jump to: A | B | C | H | I | K | L | M | N | O | R | S | T | W | Y
Number of items: 40.

A

A. Rahim, E. and H. Dorairaju, Dhemarani and Asmuin, N. and A. R. Mantari, M. H. (2015) Determination of mist flow characteristic for MQL technique using particle image velocimetry (PIV) and computer fluid dynamics (CFD). Applied Mechanics and Materials, 773. pp. 403-407. ISSN 16627482

Abd Rahim, Erween and Warap, N. M. and Mohid, Zazuli and Ibrahim, R. and Rafai, N. (2015) Numerical analysis of laser preheating for laser assisted micro milling of Inconel 718. Applied Mechanics and Materials, 773. pp. 332-336. ISSN 16627482

Abd Rahim, Erween and Warap, Norazlan and Mohid, Zazuli (2015) Thermal-assisted machining of nickel-based alloy. In: Superalloys. Intech Open Access Journal. ISBN 978-953-51-2212-8

Abdol Rahman, Mohd Nasrull and U, Joo Hui and Abdul Haq, Reazul Haq and Hassan, Mohd Fahrul and Tajul Arifin, Ahmad Mubarak and Yunos, Muhamad Zaini and Syed Abu Bakar, Sharifah Adzila (2015) Musculoskeletal discomfort among workers in mould making manufacturing industry. ARPN Journal of Engineering and Applied Sciences, 10 (15). pp. 6269-6273. ISSN 1819-6608

Ahmad, Rosli and Asmael, M. B. A. (2015) Effect of lanthanum addition on microstructure and hardness as cooling rate function of ADC12 eutectic cast alloy. In: 6th International Conference on Mechanical, Industrial, and Manufacturing Technologies (MIMT 2015), 6-7 March 2015, Melaka, Malaysia.

B

Balachandar, Vibhu Vignesh and Hasan, Sulaiman and Kandasamy, Ramasamy and Ashwinkumar, Ashwinkumar (2015) Thermal response of convective boundary layer stagnation flow of nanofluid over shrinking surface influencing suction and variable stream conditions. In: International Engineering Research and Innovation Symposium 2015 (IRIS), 12–13 September 2015, Putrajaya, Malaysia.

Balachandar, VibhuVignesh and Hasan, Sulaiman and Kumar, Ashwin and Kandasamy, Ramasamy (2015) Heat transfer of nanofluid through boundary layer stagnation flow over shrinking surface influencing injection and variable stream conditions. In: International Engineering Research and Innovation Symposium 2015 (IRIS), 12–13 September 2015, Putrajaya, Malaysia.

C

Chan, B. L. and Lajis, M. A. (2015) Direct recycling of aluminium 6061 chip through cold compression. International Journal of Engineering & Technology, 15 (4). pp. 43-47. ISSN 20771185

H

Hasan, S. and Ahmad, A. N. A. and Feriyanto, D. (2015) Computerized value stream system (CVSS) to reduce waste in lean manufacturing operation. International Journal of Innovation in Mechanical Engineering & Advanced Materials (IJIMEAM), 1 (1). pp. 13-18. ISSN 2477541X

Hasan, Sulaiman and Ahmad, A. N. Aizat and Feriyanto, Dafit (2015) Computerized value stream system (CVSS) untuk mengurangi limbah pada operasi lean manufaktur. Jurnal PASTI, 9 (1). pp. 61-71. ISSN 25984853

Hasnan, Khalid and Ahmed, Aftab and Badrul-aisham, Badrul-aisham and Bakhsh, Qadir and Hussain, Kashif and Latif, Kamran (2015) A novel optimal RFID network planning by MC-GPSO. In: International conference on Green Computing and Engineering Technology (ICGCET) 2015, 25-26 July 2015, Dubai, UAE.

Hasnan, Khalid and Bakhsh, Qadir and Ahmed, Aftab and Das, Bhagwan and Ayub, Sanam (2015) A novel hybrid locomotion mechanism for small mobile robot. In: International conference on Green Computing and Engineering Technology (ICGCET) 2015, 25-26 July 2015, Dubai, UAE.

Hassan, S. and Yusof, M. S. and Embong, Z. and Maksud, M. I. (2015) Angle resolved x-ray photoelectron spectroscopy (ARXPS) analysis of lanthanum oxide for micro-flexography printing. In: iNuSTEC2015: International Nuclear Science, Technology and Engineering Conference 2015, 17-19 Aug 2015, Negeri Sembilan.

Hassan, Suhaimi and Hehsan, Haffidzudin and K., Khairu and Esa, Mohd Faizal and Sardan, Ain Syuhada and Abd. Salim, Nuraisyah and Kasmin, Ashari (2015) Development of automated control system for kuih penderam stamping machine. Applied Mechanics and Materials , 2015. pp. 773-774. ISSN 1660-9336

Hassan, Suhaimi and Yusof, Mohd Sallehuddin and Maksud, M. I. and Nodin, Md. Nor and Rejab, N. A. (2015) A feasibility study of roll to roll printing on graphene. Applied Mechanics and Materials, 799. pp. 402-406. ISSN 1660-9336

Hassan, Suhaimi and Yusof, Mohd Sallehuddin and Maksud, M. I. and Nordin, M.N. and Rejab, Noor Azlina and Mamat, K.A. (2015) A study of nano structure by roll to roll imprint lithography. In: 2015 International Symposium on Technology Management and Emerging Technologies (ISTMET), 25-27 August 2015, Langkawi, Kedah, Malaysia.

I

Ibrahim, Mohd Halim Irwan and Mustafa, N. and Mohd Amin, Azriszul and Asmawi, Rosli (2015) Mechanical properties of SS316L and natural hydroxyapatite composite in metal injection molding. In: International Engineering Research and Innovation Symposium 2015 (IRIS), 12–13 September 2015, Putrajaya, Malaysia.

Ibrahim, Mohd Rasidi and Rafai, Noor Hakim and Kamaruddin, S.A. and Ding, H. and Cheng, K. (2015) An investigation of cutting mechanics in 2 dimensional ultrasonic vibration assisted milling toward chip thickness and chip formation. In: International Conference on Mechanical Engineering Research (ICMER), 18-19 August 2015, Kuantan, Pahang.

Ibrahim, Rasidi and Rafai, Noor Hakim and Abd Rahim, Erween and Kai, Cheng and Hui, Ding (2015) A performance of 2 dimensional ultrasonic vibration assisted milling in cutting force reduction, on aluminium AL6061. In: International Engineering Research and Innovation Symposium 2015 (IRIS), 12–13 September 2015, Putrajaya, Malaysia.

K

Kamarudin, Khairu and Wahab, Md Saidin and Ramli, M. H. (2015) Characteristic of cobalt chromium by Nd:Yag laser sintering process. In: 9th International Conference on Advanced Computational Engineering and Experimenting (ACEX 2015), 29 June - 2 July 2015, Munich, Germany.

L

Lajis, Mohd Amri (2015) ICME 2015: recycling and resource sustainability: metals recycling with innovative technology. [Video]

M

Mohd Amin, Azriszul and Ibrahim, Mohd Halim Irwan and Asmawi, Rosli and Mustafa, N. and Sa'ude, Nasuha (2015) Solvent and thermal debinding of water atomised SS316L green compact with FOG derivatives as binder in MIM. In: 4th International Conference on Advanced Manufacturing Technology (ICAMT 2015), 20-22 September 2015, Johor Bahru, Malaysia.

Mohd Ariff, Azmah Hanim and Ourdjini, Ali and Idris, Siti Rabiatull Aisha and Osman, Saliza Azlina (2015) Thermal cyclic test for Sn-4Ag-0.5Cu solders on high P Ni/Au and Ni/Pd/Au surface finishes. In: International Conference on Mechanical Engineering Research (ICMER), 18-19 August 2015, Kuantan, Pahang.

Mohid, Zazuli and Warap, N. M. and Abd Rahim, Erween (2015) Machining performance of laser assisted micro milling (LAuM) on Ti6A14V. In: 4th International Conference on Advanced Manufacturing Technology (ICAMT 2015), 20-22 September 2015, Johor Bahru, Malaysia.

Mustapha, M.A. and Wahab, Md Saidin and Abd Rahim, Erween (2015) Analysis of mouthguard design by using CFD approach. In: International Engineering Research and Innovation Symposium 2015 (IRIS), 12–13 September 2015, Putrajaya, Malaysia.

N

Nawawi, Azli and Hasnan, Khalid and Ngali, Mohd Zamani and Sidek, Noor Azizah (2015) Effect of parameters variation on the performance of particle swarm optimization algorithm for tag coverage problem of radio frequency identification network. In: Engineering Technology International Conference 2015, 10-11 August 2015, Kuta, Bali, Indonesia.

O

Osman, Saliza Azlina and Kamarul Ariffin, C.M. and Kurniawan, Denni and Ibrahim , Mohd Halim Irwan (2015) Effect of cutting speed on bio-corrosion of AISI 316L stainless steel. ARPN Journal of Engineering and Applied Sciences, 11 (4). pp. 2496-2500. ISSN 18196608

R

Rahim, Mohammad Zulafif and Li, Guangxian and Ding, Songlin and Mo, John and Brandt, Milan (2015) Electrical discharge grinding versus abrasive grinding in polycrystalline diamond machining-tool quality and performance analysis. International Journal of Advanced Manufacturing Technology, 81. pp. 1-4. ISSN 0268-3768

S

Sa'ude, Nasuha and Ibrahim, Mustaffa and Ibrahim, Mohd Halim Irwan and Mohd Amin, Azriszul (2015) Layered manufacturing (LM) of PMC filament by fused deposition modeling (FDM). In: 4th International Conference on Advanced Manufacturing Technology (ICAMT 2015), 20-22 September 2015, Johor Bahru, Malaysia.

Saleh, Aslinda and Idris, Mohd Hasbullah (2015) Oxidation of pure aluminium granules during in-situ melting. In: 2nd International Materials, Industrial & Manufacturing Engineering Conference (MIMEC 2015), 4-6 February 2015, Bali Nusa Dua Convention Center, Bali, Indonesia.

Shaari, Muhammad Farid (2015) Drag analysis of contractile water jet locomoted micro auv in laminar fluid. In: 4th International Conference on Mechanics and Mechatrnic Research (ICMMR 2015), 11-12 Jun 2015, Hotel Royal, Kuala Lumpur, Malaysia.

Shukri, M. S. and Marwah@Omar, Omar Mohd Faizan and Sharif, S. and Ibrahim, Mustaffa and Mohamad, Elmy Johana (2015) Collapsibility behaviour of ABS P400 pattern built by portable FDM machine. In: 4th International Conference on Advanced Manufacturing Technology (ICAMT 2015), 20-22 September 2015, Johor Bahru, Malaysia.

T

Tahir, A.F.M. and Abd Rahim, Erween (2015) Study on the laser cutting quality of ultra high strength steel. In: International Conference on Mechanical Engineering Research (ICMER), 18-19 August 2015, Kuantan, Pahang.

Talib, N. and A. Rahim, E. (2015) Performance evaluation of chemically modified crude Jatropha oil as a bio-based metalworking fluids for machining process. In: 12th Global Conference on Sustainable Manufacturing, 22nd – 24th of September 2014, Johor Bahru, Malaysia.

Talib, Norfazillah and Rahim, E. A. and Nasir, R. M. (2015) Investigation on the tribological behaviour of modified jatropha oil enhanced by hexagonal boron nitride particles as a lubricant additive for machining process. In: 4th International Conference on Advanced Manufacturing Technology (ICAMT 2015), 20-22 September 2015, Johor Bahru, Malaysia.

Thamizhmanii, Sivaprakasam and Mohideen, Rasool and Zaidi, A.M.A. and Hasan, Sulaiman (2015) Surface roughness and tool wear on cryogenic treated CBN insert on titanium and inconel 718 alloy steel. In: International Conference on Mechanical Engineering Research (ICMER), 18-19 August 2015, Kuantan, Pahang.

W

Wahab, Md Saidin and Wahid, M. U. and Abdul Haq, Reazul Haq (2015) Fused deposition modeling of PCL/HA/MMT biocompatible polymer nano-composites. In: International Conference on Advanced Computational Engineering and Experimenting (ACEX 2015)g, 29 June - 2 July 2015, Munich, Germany.

Y

Yusof, Yusri and Latif, Kamran (2015) A novel ISO 6983 interpreter for open architecture CNC systems. International Journal of Advance Manufacturing Technology. ISSN 0268-3768

Yusof, Yusri and Latiff, Kamran (2015) New technique for the interpretation of ISO 14649 and 6983 based on open CNC technology. International Journal of Computer Integrated Manufacturing. ISSN 0951-192X

Yusof, Yusri and Mat Nawi, Nazuandi and Alias, Muhammad Shazni Hilmi and Adam, Anbia (2015) Pineapple leaf fiber and pineapple peduncle fiber analyzing and characterization for yarn production. ARPN Journal of Engineering and Applied Sciences, 11 (6). pp. 4197-4202. ISSN 18196608

This list was generated on Tue Jun 2 23:19:57 2020 +08.