UTHM Institutional Repository

Items where Division is "Faculty of Mechanical and Manufacturing Engineering > Department of Manufacturing and Industrial Engineering" and Year is 2016

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type | No Grouping
Jump to: A | B | H | I | K | L | M | R | S | T | Y
Number of items: 50.

A

A. R., Zulhishamuddin and S. N., Aqida and A. Rahim, E. (2016) Optimization of pulsed Nd:YAG laser melting of gray cast iron at different spot sizes for enhanced surface properties. In: 19th ESAFORM Conference 2016, April 27-29th 2016, Nantes, France.

A. Rahim, E. and Rahim, A. A. and Ibrahim, M. R. and Mohid, Z. (2016) Performance of supercritical carbon dioxide (SCCO2) as a cutting fluid in machining process. YMCAUST International Journal of Research, 4 (1). pp. 75-80. ISSN 23199377

A. Rahim, E. and Rahim, A. A. and Ibrahim, M. R. and Mohid, Z. (2016) Performance of turning operation by using supercritical carbon dioxide (SCCO2) as a cutting fluid. ARPN Journal of Engineering and Applied Sciences, 11 (14). pp. 8609-8612. ISSN 18196608

A. Rahim, E. and Warap, N. M. and Mohid, Z. (2016) Investigation on the inconsistencies of cutting force when laser assisted and high speed micro ball milling of Inconel 718. ARPN Journal of Engineering and Applied Sciences, 11 (14). pp. 8603-8608. ISSN 18196608

A. Rahim, E. and Warap, N. M. and Mohid, Z. and Ibrahim, M. R. and Ismail, M. I. S. (2016) A prediction of laser spot-to-cutting tool distance in laser assisted micro milling Inconel 718. Advances In Materials And Processing Technologies, 1 (3-4). pp. 529-541. ISSN 23740698

Ab Rahim, S. N. and Lajis, M. A. and Ariffin, S. (2016) Effect of extrusion speed and temperature on hot extrusion process of 6061 aluminum alloy chip. ARPN Journal of Engineering and Applied Sciences, 11 (4). pp. 2272-2277. ISSN 18196608

Ab Rahim, S. N. and Lajis, Mohd Amri (2016) Effects of mechanical properties in extrudability of solid state recycling aluminum 6061. In: International Conference on Material Engineering and Application (ICMEA 2016), 19-21 August 2016, Hong Kong, China.

Abd Rahim, Erween and Talib, Norfazillah and Amiril S., A. S. and S., Syahrullail and Mohid, Zazuli (2016) Tribological evaluation on various formulation of modified RBD palm olein as sustainable metalworking fluids for machining process. In: 2016 7th International Conference on Manufacturing Science and Technology, 16-18 July 2016, Curtin University Sarawak.

Abdullah, Haslina and Ramli, Rizauddin and Abd Wahab, Dzuraidah and Abu Qudeiri, Jaber (2016) Tool path generation of contour parallel based on ant colony optimisation. Jurnal Teknologi, 78 (6-9). pp. 31-36. ISSN 21803722

Ahmad, R. (2016) Effect of thickness on microstructure and porosity of Al-Si alloy in vortex gating system. ARPN Journal of Engineering and Applied Sciences, 11 (10). pp. 6502-6507. ISSN 18196608

Ahmad, R. and Asmael, M. B. A. (2016) Influence of cerium on microstructure and solidification of eutectic Al–Si piston alloy. Materials and Manufacturing Processes, 31 (15). pp. 1948-1957. ISSN 15322475

Ahmad, R. and Asmael, M. B. A. (2016) Influence of lanthanum on solidification, microstructure, and mechanical properties of eutectic Al-Si piston alloy. Journal of Materials Engineering and Performance, 25 (7). pp. 2799-2813. ISSN 10599495

Ahmad, R. and Asmael, M. B. A. and Amzar, M. (2016) Effect of ytterbium addition on microstructure and hardness of Al-6.5Si-1Zn secondary cast alloy. ARPN Journal of Engineering and Applied Sciences, 11 (16). pp. 10123-10127. ISSN 18196608

Ahmad, R. and Hamzah, M. Z. and Asmael, M. B. A. and Sheggaf, Z. M. (2016) Effects of gadolinium on microstructure and hardness of Mg-Zn-Ce-Zr cast alloy. ARPN Journal of Engineering and Applied Sciences, 11 (14). pp. 8592-8597. ISSN 18196608

Ahmad, R. and M. Sheggaf, Zayad and Asmael, M. B. A. and Hamzah, M. Z. (2016) Effect of yttrium addition on microstructure and hardness of cast ZRE1 magnesium alloy. ARPN Journal of Engineering and Applied Sciences, 11 (12). 7689- 7693. ISSN 18196608

Ahmad, R. and Sheggaf, Z. M. and Asmael, M. B. A. and Hamzah, M. Z. (2016) Effect of praseodymium addition on microstructure and hardness of cast ZRE1 magnesium alloy. ARPN Journal of Engineering and Applied Sciences, 11 (10). pp. 6485-6489. ISSN 18196608

Ahmad Bareduan, Salleh and Elteriki, Salem Abdulsalam (2016) Methodology for solving two-sided assembly line balancing in spreadsheet. ARPN Journal of Engineering and Applied Sciences, 11 (10). pp. 6568-6573. ISSN 18196608

Ahmat, M. M. and Wahab, M. S. and Kassim, N. (2016) Parametric modelling of Malaysian teeth template using computer aided design. ARPN Journal of Engineering and Applied Sciences, 11 (8). pp. 5269-5274. ISSN 18196608

B

Bala, Abduladim Salem. and Wahab, Saidin and Ahmad, Mazatusziha (2016) Elements and materials improve the FDM products: a review. Advanced Engineering Forum, 16. pp. 33-51. ISSN 2234991X

H

Hashim, Mohd Yussni and Roslan, Mohd Nazrul and Marwah, Omar Mohd Faizan and Mahzan @ Mohd Zin, Shahruddin and Ariffin , Saparudin (2016) The effect of alkali treatment conditions on tensile strength of kenaf fiber. ARPN Journal of Engineering and Applied Sciences, 11 (14). pp. 8658-8662. ISSN 18196608

Hassan, Suhaimi and Yusof, Mohd Sallehuddin and Maksud, Mohd Idris and Nodin, Muhamad Nor (2016) A study of micro to nano structure fine solid line printing for graphene ink by micro-flexographic printing method. International Journal of Mechanical Engineering, 1. pp. 109-113. ISSN 23678968

I

Ibrahim, M. F. and Wahab, M. S. and A. Rahim, E. (2016) Rapid fabrication of functional mouthguard using rapid tooling approach. ARPN Journal of Engineering and Applied Sciences, 11 (12). pp. 7645-7649. ISSN 18196608

K

Kamdani, Kamaruddin and Mohd Amin, Azriszul and Taufek, Thoufeili (2016) Evaluation of porosity in metal injection. ARPN Journal of Engineering and Applied Sciences, 11 (18). pp. 11188-11191. ISSN 18196608

Khirotdin, Rd K. and Zakaria, Danieal A. and Mohadhir, Munirah (2016) Printing and curing silver conductive ink tracks from modified on-shelf inkjet printer on fabric. International Journal of Mechanical & Mechatronics Engineering, 16 (6). pp. 50-56. ISSN 2077124X

L

Lee, W. K. and Ratnam, M. M. and Ahmad, Z. A. (2016) Detection of fracture in ceramic cutting tools from workpiece profile signature using image processing and fast Fourier transform. Precision Engineering, 44. pp. 131-142. ISSN 01416359

Lee, W. K. and Ratnam, M. M. and Ahmad, Z. A. (2016) In-process detection of chipping in ceramic cutting tools during turning of difficult-to-cut material using vision-based approach. International Journal of Advance Manufacturing Technology, 85. pp. 1275-1290. ISSN 02683768

Li, Guangxian and Rahim, M. Z. and Ding, Songlin and Sun, Shoujin and Rahman, M. (2016) Wear mechanisms of PCD tools of different grain sizes manufactured by conventional abrasive grinding and electrical discharge grinding. In: Proceedings of the 2016 ASME Manufacturing Science and Engineering Conference MSEC2016, June 28 - July 1, 2016, Blacksburg, Virginia, USA.

M

Mahdi, Ahmed Sahib and Mustapa, Mohd Sukri and Lajis, Mohd Amri and Abd Rashid, Mohd Warikh (2016) The effect of cold compacting parameters for producing recycles aluminium by milling process. ARPN Journal of Engineering and Applied Sciences, 11 (10). pp. 6465-6471. ISSN 18196608

Maksud, M. I. and Nodin, M. N. and Yusof, M. S. and Hassan, S. (2016) Utilizing rapid prototyping 3D printer for fabricating flexographic PDMS printing plate. ARPN Journal of Engineering and Applied Sciences, 11 (12). ISSN 18196608

Mamat, K. A. and Yusof, M. S. and Hassan, S. and Wan Yusoff, Wan Fauziah (2016) Temperature and humidity determination for dried instant noodle drying machine. ARPN Journal of Engineering and Applied Sciences, 11 (12). ISSN 18196608

Marwah, Omar Mohd Faizan (2016) Analysis of various rapid prototyping techniques for investment casting. PhD thesis, Universiti Teknologi Malaysia.

Masood, Ibrahim and Ali, Rasheed Majeed and Mohd Solihin, Nurul Adlihisam and Elewe, Adel Muhsin (2016) Diagnosis of bivariate process variation using an integrated MSPC-ANN scheme. ARPN Journal of Engineering and Applied Sciences, 11 (12). pp. 7806-7812. ISSN 18196608

Mohammad, Musli and Yaakub, Noor Hamizah and Yahya, Mohd Shahir and Abdul Hamid, Nor Aziati (2016) Awareness, implementation, effectiveness and future adoption of operational improvement initiatives: survey results. In: Proceedings of the 2016 International Conference on Industrial Engineering and Operations Management, 8-10 March 2016, Kuala Lumpur, Malaysia.

Mohd Pauzi, Nur Fazlinda and Ahmad Bareduan, Salleh (2016) Scheduling analysis for flowship using artifical bee colony (ABC) algorithm with varying onlooker approaches. ARPN Journal of Engineering and Applied Sciences, 11 (10). pp. 6472-6477. ISSN 18196608

Mohid, Z. and Warap, N. M. and A. Rahim, E. (2016) Machining characteristics of laser assisted micro milling (LAμM) on Ti6Al4V using micro ball milling tool. ARPN Journal of Engineering and Applied Sciences, 11 (12). pp. 7848-7852. ISSN 18196608

Mohid, Zazuli and A. Rosely, M. A. and Rafai, Noor Hakim and Rahim, Mohammad Zulafif and Ibrahim, Mohd Rasidi and Abd Rahim, Erween (2016) Laser micro welding of dissimilar material of aluminum and copper alloys. In: 2016 7th International Conference on Manufacturing Science and Technology, 16-18 July 2016, Curtin University Sarawak.

Mohid, Zazuli and Rafai, Noor Hakim and Ibrahim, Rasidi and Abd Rahim, Erween (2016) Melted zone shapes transformation in titanium alloy welded using pulse wave laser. In: 2016 7th International Conference on Manufacturing Science and Technology, 16-18 July 2016, Curtin University Sarawak.

Mustapa, Mohd Sukri and Mahdi, Ahmed Sahib and Lajis, Mohd Amri and Abd Rashid, Mohd Warikh (2016) Physical properties of recycling milled aluminium chip (AA6061) for various sintering temperature. International Journal of Mechanical and Industrial Technology, 3 (2). pp. 33-40. ISSN 23487593

Mustapha, M. A. and Wahab, M. S. and A. Rahim, E. (2016) Analysis of air flow in the mouthguard design by using CFD approach. ARPN Journal of Engineering and Applied Sciences, 11 (12). pp. 7470-7474. ISSN 18196608

R

Ramli, M. S. and Wahab, M. S. and Ahmad, M. and Bala, A. S. (2016) FDM preparation of bio-compatible UHMWPE polymer for artificial implant. ARPN Journal of Engineering and Applied Sciences, 11 (8). pp. 5474-5480. ISSN 18196608

Ramly, Edly Ferdin and Mohammad, Musli and Yahya, Mohd Shahir (2016) Enablers for integrated operations diagnosis and improvement. ARPN Journal of Engineering and Applied Sciences, 11 (12). pp. 7748-7751. ISSN 18196608

S

Sa'ude, Nasuha and Ibrahim, M. and Ibrahim, M. H. I. (2016) Melt flow rate (MFR) of abs-copper composite filament by fused deposition modeling (FDM). ARPN Journal of Engineering and Applied Sciences, 11 (10). pp. 6562-6567. ISSN 18196608

Shamsudin, S. and Zhong, Z. W. and Ab Rahim, S. N. and Lajis, M. A. (2016) The influence of temperature and preheating time in extrudate quality of solid-state recycled aluminum. The International Journal of Advanced Manufacturing Technology. pp. 1-13. ISSN 14333015

Shamsudin, Shazarel and Lajis, M. A. and Zhong, Z. W. (2016) Solid-state recycling of light metals: a review. Advances in Mechanical Engineering, 8 (8). pp. 1-23. ISSN 16878140

Shukri, M. S. and Marwah, O. M. F. and Ibrahim, M. and Sharif, S. and Mohamad, E. J. (2016) An experimental analysis of strain and stress for ABS pattern developed by portable FDM machine used in direct investment casting. ARPN Journal of Engineering and Applied Sciences, 11 (10). pp. 6496-6501. ISSN 18196608

T

Talib, N. and A. Rahim, E. (2016) The effect of tribology behavior on machining performances when using bio-based lubricant as a sustainable metalworking fluid. In: 13th Global Conference on Sustainable Manufacturing - Decoupling Growth from Resource Use, 16-18 September 2015, Binh Duong New City, Vietnam.

Talib, N. and A. Rahim, E. and Nasir, R. M. (2016) The performance of hexagonal boron nitride as an additive in the bio-based machining lubricant. ARPN Journal of Engineering and Applied Sciences, 11 (12). pp. 7835-7840. ISSN 18196608

Teo, Yen Bin and Jalil, Azlis-Sani and Mohd Yunos, Muhammad Nur Annuar and S. M. Ismail, S. M. Sabri and Ahmad Tajedi, Noor Aqilah (2016) Preliminary investigation of workload on intrastate bus traffic controllers. IOP Conference Series: Materials Science and Engineering, 160 (1). pp. 1-9. ISSN 1757899X

Teo, Yen Bin and Jalil, Azlis-Sani and Mohd Yunos, Muhammad Nur Annuar and S.M. Ismail, S.M. Sabri and Ahmad Tajedi, Noor Aqilah (2016) Task analysis assessment on intrastate bus traffic controllers. IOP Conference Series: Materials Science and Engineering, 160 (1). pp. 1-6. ISSN 1757899X

Y

Yahya, Mohd Shahir and Mohammad, Musli and Omar, Badrul and Ramly, Edly Ferdin (2016) A review on the selection of lean production tools and techniques. ARPN Journal of Engineering and Applied Sciences, 11 (12). ISSN 18196608

This list was generated on Tue Jun 2 23:20:04 2020 +08.