UTHM Institutional Repository

Items where Division is "Faculty of Mechanical and Manufacturing Engineering > Department of Plant and Automotive Engineering" and Year is 2014

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type | No Grouping
Jump to: A | D | H | K | L | M | P | R | S | Y | Z
Number of items: 64.

A

Abdullah, Mohammad Kamil and Aminnuddin, Hazim Fadli and Mohamad, Akmal Nizam (2014) Parametric study on anti-vortex film cooling hole arrangements. Applied Mechanics and Materials, 660. pp. 664-668. ISSN 1662-7482

Abdullah, Mohammad Kamil and Firdauz, Amon and Mohd Ali, Mas Fawzi (2014) Parametric study on geometrical arrangement of sister hole. In: International Integrated Engineering Summit (IIES 2014), 1-4 December 2014, Universiti Tun Hussein Onn Malaysia, Johor.

Abdullah, Mohammad Kamil and Osama H., AbdulGuad and Mohammed, Akmal Nizam and Suleiman, Zaid (2014) Comparison of rans and u-rans for flat plate film cooling. In: International Integrated Engineering Summit (IIES 2014), 1-4 December 2014, Universiti Tun Hussein Onn Malaysia, Johor.

Ali, Mohd Amran and Laily Suraya, Laily Suraya and Mohd Nordin, Fatin Aisyah and Hussein, Nur Izan Syahriah and Muhamad, Mohd Razali and Manshoor, Bukhari and Lajis, Mohd Amri and Raja, Izamshah and Mohd Hadzley, Mohd Hadzley and Taufik, Taufik (2014) The performance of brass electrode on material removal for aluminium composite in EDM die-sinking. Applied Mechanics and Materials, 660. pp. 43-47. ISSN 1662-7482

Alimin, Ahmad Jais and Ismail, Muhammad Yusri and Osman, Shahrul Azmir (2014) Predicting the performance and emissions characteristics of a medium duty engine retrofitted with compressed natural gas system using 1-dimensional software. Applied Mechanics and Materials, 660. pp. 468-473. ISSN 1662-7482

Amirnordin, Shahrin Hisham and Ismail, Salwani and Yii, RONNY, Shi Chin and Mansor, Norani and Mohd Ali, Mas Fawzi and Khalid, Amir (2014) Effects of nozzle diameter on the spray characteristics of premix injector in burner system. In: International Integrated Engineering Summit (IIES 2014), 1-4 December 2014, Universiti Tun Hussein Onn Malaysia, Johor.

Andsaler, Adiba Rhaodah and Khalid, Amir and Him, Ramsy and Mohamad Jaat, Md Norrizam (2014) A review paper on simulation and modeling of combustion characteristics under high ambient and high injection of biodiesel combustion. In: International Integrated Engineering Summit (IIES 2014), 1-4 December 2014, Universiti Tun Hussein Onn Malaysia, Johor.

Asmuin, Norzelawati (2014) Design for two-fluid fine nozzle with 50% fill ratio. In: International Integrated Engineering Summit (IIES 2014), 1-4 December 2014, Universiti Tun Hussein Onn Malaysia, Johor.

Asmuin, Norzelawati and Sies, Mohamad Farid and Hassan, Mohamad Khairi and Pairan, M. R. and Nor Salim, Nor Adrian and Zakaria, Hanis (2014) Simulation of water mist spray for commercial kitchen ventilation (CKV) system using Ansys-CFD. Applied Mechanics and Materials, 660. pp. 704-708. ISSN 1662-7482

Azman, Norazwan and Manshoor, Bukhari and Khalid, Amir (2014) The production and comparison of fuel properties on biodiesel with alternative fuel : a review. In: International Integrated Engineering Summit (IIES 2014), 1-4 December 2014, Universiti Tun Hussein Onn Malaysia, Johor.

Azman, Norazwan and Manshoor, Bukhari and Samsudin, Dahrum and Khalid, Amir (2014) Experimental investigation of standard handling and storage duration on fuel properties, appearance, burning process and emissions of biodegradable alternative fuel. In: International Integrated Engineering Summit (IIES 2014), 1-4 December 2014, Universiti Tun Hussein Onn Malaysia, Johor.

Azman, Norazwan and Suardi, Mirnah and Khalid, Amir (2014) The effects of storage duration on biodiesel derived from waste cooking oil. Applied Mechanics and Materials, 660. pp. 386-390. ISSN 1662-7482

D

Didane, DJamal Hissein and Woon, Qiu Yik and Md Seri, Suzairin and Amirnordin, Shahrin Hisham (2014) Effects of geometrical parameters to the performance of louvered fin heat exchangers. In: International Integrated Engineering Summit (IIES 2014), 1-4 December 2014, Universiti Tun Hussein Onn Malaysia, Johor.

H

Hariri, Azian and Paiman, Nuur Azreen and Leman, Abd Mutalib and Md Yusof, Mohammad Zainal (2014) Pulmonary adverse effects of weld bonding process by Malaysia's automobile assembly welders. Procedia Engineering, 68 (2013). pp. 299-304. ISSN 18777058

Hariri, Azian and Paiman, Nuur Azreen and Leman, Abd Mutalib and Md Yusof, Mohammad Zainal (2014) Pulmonary function status among welders in Malaysian’s automotive industries. Journal of Clean Energy Technologies, 2 (2). pp. 108-111.

Humairak, Yusof and Tamaldin, Noreffendy and Abdollah, Mohd Fadzli B. and Ali, M. F. and Khalid, Amir (2014) The storage effect on fuel properties and emission for variety biodiesel blends. In: International Integrated Engineering Summit (IIES 2014), 1-4 December 2014, Universiti Tun Hussein Onn Malaysia, Johor.

K

Khalid, Amir and Abas, Azmi (2014) Effects of fuel additive on performance and emissions characteristics of diesel engine fuelled by biodiesel derived from palm oil. In: International Integrated Engineering Summit (IIES 2014) , 1-4 December 2014, Universiti Tun Hussein Onn Malaysia, Johor.

Khalid, Amir and Anuar, M. D. and Sapit, Azwan and Razali, Mohd Azahari and Manshoor, Bukhari and Mohd Ali, Mas Fawzi and Zaman @ Bujang, Izzuddin (2014) Experimental investigation of emissions characteristics of small diesel engine fuelled by blended crude palm oil. Applied Mechanics and Materials, 660. pp. 462-467. ISSN 1662-7482

Khalid, Amir and Lambosi, Latip and Suardi, Minah and Amirnordin, Shahrin Hisham and Zaman, Izzudin and Mansor, Norani and Manshoor, Bukhari (2014) Spray characteristic of rapid mixing jatropha oil biodiesel in burner system. In: International Integrated Engineering Summit (IIES 2014) , 1-4 December 2014, Universiti Tun Hussein Onn Malaysia, Johor.

Khalid, Amir and Manshoor, Bukhari and Sapit, Azwan and Razali, Mohd Azahari and Zaman, Izzuddin and Mohamad, Mohd Nor Anuar (2014) The effect of storage container and light exposure on biodiesel characteristics derived by crude palm oil. In: International Integrated Engineering Summit (IIES 2014), 1-4 December 2014, Universiti Tun Hussein Onn Malaysia, Johor.

Khalid , Amir and Amirnordin, Shahrin Hisham and Lambosi, Latip and Manshoor, Bukhari and Sies, Mohamad Farid and Salleh, Hamidon (2014) Spray characteristic of diesel-water injector for burner system. Advanced Materials Research, 845. ISSN 1662-8985

Khalid , Amir and Ishak, Yusri and Manshoor, Bukhari and Sapit, Azwan and Leman, Abd Mutalib and Zaman, Izzuddin (2014) Emissions characteristics of small diesel engine fuelled by waste cooking oil. In: 4th International Conference on Production, Energy and Reliability 2014 (ICPER 2014) , 3-5 June 2014, Kuala Lumpur Convention Centre, Malaysia .

Khalid , Amir and Manshoor, Bukhari and Alimin, Ahmad Jais and Mustafa, Norrizal and Basharie , Siti Mariam and Sadikin, Azmahani (2014) Performance and Emission of a Diesel Engine Fuelled With Preheated Palm Oil Biodiesel under High Load Conditions. Advanced Materials and Research Vols. 845 (2014), 845. pp. 61-65.

Khalid , Amir and Mustafa, Norrizal and Manshoor, Bukhari and Zakaria, Hanis and Alimin, Ahmad Jais and Leman, Abd Mutalib and Sadikin, Azmahani (2014) The comparison of preheat fuel characteristics of biodiesel and straight vegetable oil. Applied Mechanics and Materials Vols. 465-466 (2014), 456. pp. 161-166.

Khalid , Amir and Sapit, Azwan and M. N., Anuar and HIM, Ramsy and Manshoor, Bukhari and Zaman, Izzuddin and Ngali, Mohd Zamani (2014) Analysis of fuel injection parameter on biodiesel and diesel spray characteristics using common rail system. In: 5th International Conference on Mechanical, Industrial and Manufacturing Technologies (MIMT2014), 10-11 Mac 2014, The Gumey Resort hotel & Residence, Pulau Pinang.

L

Lambosi, Latip and Khalid, Amir and Manshoor, Bukhari (2014) Emission and performance characteristic of biodiesel burner system: a review. In: International Integrated Engineering Summit (IIES 2014), 1-4 December 2014, Universiti Tun Hussein Onn Malaysia, Johor.

Lambosi, Latip and Khalid, Amir and Manshoor, Bukhari and Amirnordin, Shahrin Hisham and Lo, Kok Hao (2014) Effect of nozzle angle to combustion characteristic in biodiesel burner. In: International Integrated Engineering Summit (IIES 2014), 1-4 December 2014, Universiti Tun Hussein Onn Malaysia, Johor.

M

Madon, Rais Hanizam and M. Zamree, Muhammad Afiq and Amirnordin, Shahrin Hisham and Mohd Ali, Mas Fawzi (2014) Heating and cooling of an aluminium-cased parallel flow microreactor for steam-methane reforming. In: International Integrated Engineering Summit (IIES 2014), 1-4 December 2014, Universiti Tun Hussein Onn Malaysia, Johor.

Manshoor, Bukhari and Md Saufi, Muhammad Faiq and Khalid, Amir and Izzuddin, Zaman (2014) CFD analysis of industrial multi-stage impeller in stirred tank with fractal pattern baffled and impeller. In: International Integrated Engineering Summit (IIES 2014), 1-4 December 2014, Universiti Tun Hussein Onn Malaysia, Johor.

Manshoor, Bukhari and Yusof, Afifah and Suraya Laily, Suraya Laily and Zaman @ Bujang, Izzuddin and Khalid, Amir (2014) An effect of fractal baffles and impellers with double stage 4-blade rushton turbine to fluid flow behaviour in stirred tank. Applied Mechanics and Materials, 660. pp. 816-822. ISSN 1662-7482

Manshoor, Bukhari and Zaman, Izzuddin and Asmuin, Norzelawati and Ramlan, F. (2014) Optimizing of make up air performance for commercial kitchen ventilation improvement. In: 4th International Conference on Production, Energy and Reliability 2014 (ICPER 2014), 3-5 June 2014, Kuala Lumpur Convention Centre, Malaysia.

Mat Isa, Norasikin and A. Malek, Izzat and Sadikin, Azmahani and Basharie, Siti Mariam and Asmuin, Norzelawati (2014) Experimental study of splitting device for horizontal pipeline. Applied Mechanics and Materials, 660. pp. 714-718. ISSN 1662-7482

Md Seri, Suzairin and Abdul Karim, Zainal Ambri and Salleh, Hamidon and Mohideen Batcha, Mohd Faizal and R. Raghavan, Vijay (2014) Hydrodynamic characteristics of flow around tube bank with integral wake splitter. Applied Mechanics and Materials, 660. pp. 649-653. ISSN 1662-7482

Md Yazid, Muhammad Haziq and Salleh, Hamidon and Azahari, Razali (2014) An experiment investigation of film cooling effectivenes of sister hole of cylindrical shaped hole film cooling geometry on a flat plate surface. In: International Integrated Engineering Summit (IIES 2014), 1-4 December 2014, Universiti Tun Hussein Onn Malaysia, Johor.

Mohamad Jaat, Md Norrizam and Manshoor, Bukhari and Basharie, Siti Mariam and Andsaler, Adiba Rhaodah and Sapit, Azwan and Khalid, Amir (2014) Study on spray characteristics of biodiesel using a rapid compression machine. In: International Integrated Engineering Summit (IIES 2014), 1-4 December 2014, Universiti Tun Hussein Onn Malaysia, Johor.

Mohd Ali, Mas Fawzi and Mustaffa, Norrizal and Hushim, Mohd Faisal and Osman, Shahrul Azmir (2014) Application of injector-volume ratio values in the development of a fuel injection controller. In: International Integrated Engineering Summit (IIES 2014), 1-4 December 2014, Universiti Tun Hussein Onn Malaysia, Johor.

Mohmad Ja'at @ Mohd Noh, Md Norrizam and Khalid, Amir and Sapit, Azwan and Basharie, Siti Mariam and Andsaler, Adiba Rhaodah and Ramsy, Him (2014) Effects of temperature and ambient pressure on spray characteristics of biodiesel combustion. In: International Integrated Engineering Summit (IIES 2014) , 1-4 December 2014, Universiti Tun Hussein Onn Malaysia, Johor.

Mokhtar, Azizul and Atan, Nazrul and Rahman, Najib and Khalid, Amir (2014) Review of performance and emmissions characteristics of bio-additive fuel on SI engine fuelled by biopetrol. In: International Integrated Engineering Summit (IIES 2014), 1-4 December 2014, Universiti Tun Hussein Onn Malaysia, Johor.

Muarat, Nurul Farhanah and Hussein, Mohamed and Raja Hamzah, Raja Ishak and Ahmad, Zair Asrar and Mohamad, Maziah and Md Zain, Mohd Zarhamdy and Mat Isa, Norasikin (2014) Adjustable acoustical performance based on deformable origamic shapes: a preliminary experimental investigation. Applied Mechanics and Materials, 660. pp. 526-530. ISSN 1662-7482

Mustaffa, Norrizal and Khalid , Amir and Sies, Mohamad Farid and Zakaria, Hanis and Manshoor, Bukhari (2014) Performance and emissions of preheated biodiesel on a compression ignition (CI) engines. Applied Mechanics and Materials , 465. pp. 291-295. ISSN 1660-9336

Mustaffa, Norrizal and Khalid , Amir and Sies, Mohamad Farid and Zakaria, Hanis and Manshoor, Bukhari (2014) Preheated biodiesel derived from vegetable oil on performance and emissions of diesel engines: a review. Applied Mechanics and Materials , 465. pp. 285-290. ISSN 1660-9336

P

Pairan, Mohamad Rasidi and Asmuin, Norzelawati and Muni, Z. A. and Kassim, M. H. M. and Sies, Mohamad Farid (2014) Flow characteristics study in kitchen hood using Ansys. Applied Mechanics and Materials, 660. pp. 694-698. ISSN 1662-7482

R

Rahman, Mohd Najib and Atan, Nazrul and Mokhtar, Azizul and Khalid, Amir (2014) Influences of intake temperature and bio-petrol fuel temperature on SI engine: an overview. In: International Integrated Engineering Summit (IIES 2014), 1-4 December 2014, Universiti Tun Hussein Onn Malaysia, Johor.

Ramsy, Him and Ahmad, Thahir and Jaat, M. and Khalid, Amir (2014) Influences of cylinder wall temperature on heat release during compression period. Applied Mechanics and Materials, 660. pp. 431-435. ISSN 1662-7482

Ramsy, Him and Khalid, Amir and Andsaler, Adiba Rhaodah and Mohmad Ja'at @ Mohd Noh, Md Norrizam (2014) Modeling of common rail system and constant volume chamber in biodiesel combustion: a review. In: International Integrated Engineering Summit (IIES 2014), 1-4 December 2014, Universiti Tun Hussein Onn Malaysia, Johor.

S

Sadikin, Azmahani and Jamil, Muhammad Adib and Mat Isa, Norasikin (2014) Investigation of boiling heat transfer and flow regimes in a heat exchanger. Applied Mechanics and Materials, 660. pp. 679-683. ISSN 1662-7482

Sadikin, Azmahani and Mat Isa, Norasikin (2014) Numerical study of flow separation and pressure drop for flow past staggered tube bundles. In: International Integrated Engineering Summit (IIES 2014), 1-4 December 2014, Universiti Tun Hussein Onn Malaysia, Johor.

Sadikin, Azmahani and Md Noor, Md Iskandar and Mat Isa, Norasikin and Basharie, Siti Mariam and Khalid, Amir (2014) Pressure distribution around mixing blades in biodiesel reactor using computational fluid dynamics (GFD). Applied Mechanics and Materials , 554. pp. 381-385. ISSN 1660-9336

Sadikin, Azmahani and Mohd Yunus, Nurul Akma and Abdullah, Mohammad Kamil and Mohammed, Akmal Nizam (2014) Numerical study of flow past a solid sphere at moderate Reynolds Number. Applied Mechanics and Materials, 660. pp. 674-678. ISSN 1662-7482

Salleh, Hamidon and Yee, Jingzu and Azahari, Razali (2014) Experimental study on film cooling effectiveness of shallow hole with upstream sister holes. In: International Integrated Engineering Summit (IIES 2014), 1-4 December 2014, Universiti Tun Hussein Onn Malaysia, Johor.

Samsudin, Dahrum and Anuar, M. D. and Othman, Safwan and Manshoor, Bukhari and Khalid, Amir (2014) Application of schlieren optical visualization system in external combustion and internal combustion engine: a review. In: International Integrated Engineering Summit (IIES 2014), 1-4 December 2014, Universiti Tun Hussein Onn Malaysia, Johor.

Samsudin, Dahrum and Manshoor, Bukhari and Mohamad, Md Nor Anuar and Othman, M. S. and Khalid, Amir (2014) Study of schlieren optical visualization basics technique and the principle. In: International Integrated Engineering Summit (IIES 2014), 1-4 December 2014, Universiti Tun Hussein Onn Malaysia, Johor.

Samsudin, Dahrum and Othman, Safwan and Anuar, M. D. and Manshoor, Bukhari and Khalid, Amir (2014) Experimental investigation of mixture formation and flame development using the basics technique of schlieren optical visualization principle. Applied Mechanics and Materials, 660. pp. 474-478. ISSN 1662-7482

Sapit, Azwan and Razali, Mohd Azahari and Hushim, Mohd Faisal and Mohamad Jaat, Md Norrizam and Mohamad, Akmal Nizam and Khalid, Amir (2014) Dynamic behavior of rapeseed oil spray in diesel engine. In: International Integrated Engineering Summit (IIES 2014), 1-4 December 2014, Universiti Tun Hussein Onn Malaysia, Johor.

Sapit, Azwan and Razali, Mohd Azahari and Mohamad Jaat, Md Norrizam and Mohamad, Akmal Nizam and Khalid, Amir and Manshoor, Bukhari (2014) Optical technique using nano-spark lightsource for macro and microscale image acquisition to study diesel spray atomization. In: International Integrated Engineering Summit (IIES 2014), 1-4 December 2014, Universiti Tun Hussein Onn Malaysia, Johor.

Sies, Mohamad Farid and Mustaffa, Norrizal and Zakaria, Hanis and Salleh, Hamidon and Manshoor, Bukhari and Khalid , Amir (2014) A review of the concept of fuel-water internally rapid mixing injector in burner system. Applied Mechanics and Materials , 465. pp. 296-301. ISSN 1660-9336

Suardi, Mirnah and Azman, Norazwan and Samsudin, Dahrum and Amirnordin, S. H. and Mansor, Norani and Khalid, Amir (2014) Experimental study of the ignition process and combustion of biodiesel-water-air rapid mixing derived from waste cooking oil, crude palm oil and jatropha oil in burner combustion. In: International Integrated Engineering Summit (IIES 2014), 1-4 December 2014, Universiti Tun Hussein Onn Malaysia, Johor.

Suardi, Mirnah and Azman, Norazwan and Samsudin, Dahrum and Amirnordin, Shahrin Hisham and Khalid , Amir (2014) Effect of mixture formation of biodiesel-water-air rapid mixing derived from crude palm oil and waste cooking oil in burner combustion. Applied Mechanics and Materials, 660. pp. 421-425. ISSN 1662-7482

Suardi, Mirnah and Azman, Norazwan and Samsudin, Dahrum and Mansor, Norani and Khalid, Amir (2014) Analysis of emulsified renewable fuel injector in burner combustion: an overview. In: International Integrated Engineering Summit (IIES 2014), 1-4 December 2014, Universiti Tun Hussein Onn Malaysia, Johor.

Y

Yii, Ronny Shi Chin and Amirnordin, Shahrin Hisham and Khalid, Amir (2014) Effects of nozzle shape on the flow characteristics of premix injector using computational fluid dynamics (CFD). In: International Integrated Engineering Summit (IIES 2014), 1-4 December 2014, Universiti Tun Hussein Onn Malaysia, Johor.

Yii, Ronny Shi Chin and Amirnordin, Shahrin Hisham and Mansor, Mohamad Norani and Khalid, Amir (2014) Numerical analysis of nozzle hole shape to the spray characteristics from premix injector in burner system: a review. In: International Integrated Engineering Summit (IIES 2014), 1-4 December 2014, Universiti Tun Hussein Onn Malaysia, Johor.

Z

Zakaria, Hanis and Khalid , Amir and Sies, Mohamad Farid and Mustaffa, Norrizal (2014) Overview effect of biodiesel storage on properties and characteristics. Applied Mechanics and Materials , 465. pp. 260-264. ISSN 1660-9336

Zakaria, Hanis and Khalid , Amir and Sies, Mohamad Farid and Mustaffa, Norrizal and Manshoor, Bukhari (2014) Effect of storage temperature and storage duration on biodiesel properties and characteristics. Applied Mechanics and Materials , 465. pp. 316-321. ISSN 1660-9336

Zakaria, Jamal Hazri and Md Zaid, Mohd Hadi Hashemi and Mohideen Batcha, Mohd Faizal and Asmuin, Norzelawati (2014) Drying of sponge media using swirling fluidized bed dryer. Applied Mechanics and Materials, 660. pp. 644-648. ISSN 1662-7482

This list was generated on Mon Jan 20 02:10:22 2020 +08.