Items where Division is "Faculty of Mechanical and Manufacturing Engineering" and Year is 2024

Article

Abdul Aziz, Muhamad Wafi and Ramli, Muhammad Faiz (2024) Region Detection Technique Using Image Subtraction and Pixel Expansion Cue for Obstacle Detection System on Small – Sized UAV. International Journal of Computing and Digital Systems, 15 (1). pp. 451-463.

Ahmad Adib Najib, Ahmad Adib Najib and Djamal Hissein Didane, Djamal Hissein Didane and Mostafa Radwan Behery, Mostafa Radwan Behery and Hashim Ahmed Kabrein, Hashim Ahmed Kabrein (2024) Comparison of 2D and 3D Simulations on Predicting the Performance of a Savonius Wind Turbine. CFD Letters, 16 (7). pp. 71-88. ISSN 2180-1363

Hamdan, Nur Izzah and Zainulabidin, Muhd Hafeez (2024) Sound Absorption Characteristics of Integrated Membrane-Fabric Materials. Journal of Advanced Research in Applied Mechanics, 113 (1). pp. 63-78. ISSN 2829-7895

Kamaruddin, Ridzwan and Sulaiman, Syabillah and Khalid, Amir and Arafat, Mohammad and Jaat, Norrizam and Zainal Abidin, Shaiful Fadzil and Mohamed, Norirda and Yasak, Mohd Fuad (2024) Computational Fluid Dynamics: Flow Analysis on the Effect of Different Jet Orifice Angle Multi Circular Jet for Fuel and Air Mixing. CFD Letters, 16 (1). pp. 121-137. ISSN 2180-1363

Lee Sen Tan, Lee Sen Tan and Zainuddin, Zarita and Pauline Ong, Pauline Ong and Abdullah, Farah Aini A (2024) An effective wavelet neural network approach for solving first and second order ordinary differential equations. Applied Soft Computing, 154. pp. 1-17.

Mostafa Radwan Behery, Mostafa Radwan Behery and Djamal Hissein Didane, Djamal Hissein Didane and Bukhari Manshoor, Bukhari Manshoor (2024) Optimization of Flanged Diffuser for Small-Scale Wind Power Applications. CFD Letters, 16 (7). pp. 54-70. ISSN 2180-1363

Nik Ab Rashid, Nik Muhammad Hafiz and Hairuddin, Abdul Aziz and Md Rezali, Khairil Anas and Masuri, Siti Ujila and Al Anbagi Muntasser Abdulabbas Mossa, Al Anbagi Muntasser Abdulabbas Mossa and Jaafar, Jamiluddin and Deni Fajar Fitriyana, Deni Fajar Fitriyana (2024) Computational Fluid Dynamics (CFD) Validation and Investigation the Effect of Piston Bowl Geometries Performance on Port Fuel InjectionHomogeneous Charge Compression Ignition (PFI-HCCI) Engines. Journal of Advanced Research in Numerical Heat Transfer, 18 (1). pp. 30-48. ISSN 2735-0142

Pauline Ong, Pauline Ong and Anelka John Koshy, Anelka John Koshy and Kee Huong Lai, Kee Huong Lai and Chee Kiong Sia, Chee Kiong Sia and Maznan Ismon, Maznan Ismon (2024) A deep learning approach for health monitoring in rotating machineries using vibrations and thermal features. Decision Analytics Journal, 10. pp. 1-9.

Supawi, Aiman and Ahmad, Said and Talib, Norfazillah and Lee Woon Kiow, Lee Woon Kiow and Ho Fu Haw, Ho Fu Haw and Lajis, Mohd Amri (2024) Electrode Wear Rate of RBD Palm Oil as Dielectric Fluids on Electrical Discharge Machining (EDM) at Different Peak Current and Pulse Duration of Titanium Alloys. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 112 (2). pp. 54-63. ISSN 2289-7879

TEZARA CIONITA, TEZARA CIONITA and JAMILUDDIN JAAFAR, JAMILUDDIN JAAFAR and LING-SHING WONG, LING-SHING WONG and JANUAR PARLAUNGAN SIREGAR, JANUAR PARLAUNGAN SIREGAR and AL EMRAN ISMAIL, AL EMRAN ISMAIL and MOHAMAD FARID SIES, MOHAMAD FARID SIES and AGUSTINUS PURNA IRAWAN, AGUSTINUS PURNA IRAWAN and AGUNG EFRIYO HADI, AGUNG EFRIYO HADI (2024) A BRIEF REVIEW ON THE UTILIZATION OF BIOPOLYMERS IN THE MANUFACTURING OF NATURAL FIBER COMPOSITES. Journal of Engineering Science and Technology, 19 (1). pp. 52-66.

Tan Kang Huai, Tan Kang Huai and Yohannes Lowrance, Yohannes Lowrance and Abd Rahman, Nurul Farhana and Yusop, Umira Asyikin and Abd Rahman, Hamimah and Jaidi, Zolhafizi and Tukimon, Mohd Faizal and Mohd Azami, Mohammad Saifulddin (2024) Mathematical modeling and experiment verification for the Solid oxide Fuel Cell Mn1.5Co1.5O4 interconnect coatin. Materials Letters, 358. pp. 1-4.

Y. H. Yu, Y. H. Yu and P. Ong, P. Ong and H. A. Wahab, H. A. Wahab (2024) Intelligent optimization of a hybrid renewable energy system using an improved fower pollination algorithm. International Journal of Environmental Science and Technology. pp. 5105-5126.

Conference or Workshop Item

Daniel, M. Afiq and Raja Ahmad, Raja Adibah and Hussin, R. and Hamidon, M. Adam Bukhori and Harun, Z. and Yunos, M. Z. and Ainuddin, A. R. (2024) The oil sorption behaviour investigation of Kapok (Ceiba pentandra (L.)) fiber. In: https://doi.org/10.1063/5.0183198.

Fernando, Very and Hasbullah, Hasbullah and Wirawan, Nanda Tommy and Bareduan, Salleh Ahmad (2024) I4.0 readiness index in electric power distribution in serving modern consumers. In: AIP Conference Proceedings. (Unpublished)

Jaat, Norrizam and Amir Khalid, Amir Khalid and Sulaiman, Syabillah and Azizul, Muhamad Asri and Mohamed, Norirda and Salleh, Hamidon and Razali, Azahari and Mohamed Sunar, Norshuhaila and Abdul Jalal, Rifqi Irzuan (2024) Effect of tire pyrolysis oil, crude palm biodiesel and engine speed on engine performance. In: AIP Conference Proceedings.

Malik, Z. and Ibrahim, S. A. and Ainuddin, A. R. and Hussin, R. and Kamdi, Z. (2024) Development of visible light-responsive mono and co-doped TiO2 for photocatalytic degradation of. In: AIP Conference Proceedings.

Mat Zaki, Muhammad Zikri and Kamdi, Z. and Ainuddin, A. R. and Hussin, R. and Ibrahim, S. A. (2024) Wear behavior of heat-treated coated carbon steel. In: AIP Conference Proceedings.

Mohd Yaacob, Nur Syuhada and Khalid, Amir and Jaat, Norrizam and Rhaodah Andsaler, Adiba and Azizul, Muhamad Asri and Sapit, Azwan (2024) Simulation and modelling of spray characteristics, spray penetration length and injection pressure of biodiesel. In: 5TH INTERNATIONAL CONFERENCE ON AUTOMOTIVE INNOVATION AND GREEN ENERGY VEHICLE 2022, AIGEV 2022.

Mohd Yaacob, Nur Syuhada and Khalid, Amir and Nursal, Ridwan Saputra and Jaat, Norrizam and Andsaler, Adiba Rhaodah and Azizul, Muhamad Asri and Manshoor, Bukhari and Zaman, Izzuddin (2024) Effects of ambient density and high injection pressure on the flow characteristics of biodiesel spray. In: AIP Conference Proceedings.

Shuban, Farah Syahidah and Idris, Maizlinda Izwana (2024) Fabrication of natural and bio-based wound healing material from alginate and beeswax. In: AIP Conference Proceedings.