Items where Subject is "T Technology > T Technology (General)"

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Creators | Item Type
Jump to: | A | B | D | E | H | I | J | K | L | M | N | O | P | R | S | T | W | Y | Z
Number of items at this level: 239.

Arumugam, Thillai Nayagee (2009) Experimental study on resilient modulus of liquid silicon dioxide (SIO2) stabilized subgrade soil. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Husaini, Noor Aida and Ghazali, Rozaida and Ismail, Lokman Hakim and Abdul Hamid, Norhamreeza and Mat Deris, Mustafa and Mohd Nawi, Nazri Temperature forecasting with a dynamic higher-order neural network model. iiWAS '11 Proceedings of the 13th International Conference on Information Integration and Web-based Applications and Services . p. 2011.

Ismail, Mohd Norasri (2008) A data model for multimedia database of Malaysian cultural heritage artefacts management. In: 4th International Conference on Information Technology and Multimedia (ICIMU' 2008), Malaysia, 17-19 November 2008, Universiti Tenaga Nasional (UNITEN).

Othman, Safiah (2008) A numerical study of transient natural convection of water near its density extremum. In: International Conference on Mechanical and Manufacturing Engineering 2008 (ICME 2008), Puteri Pacific Johor Bahru, Johor, Malaysia .

A

A. Faisal , Alshalif and Juki, Mohd Irwan and Othman, Norzila and Luis Hii, Anneza (2015) Isolation of sulphate reduction bacteria (SRB) to improve compress strength and water penetration of bio-concrete. In: IConCEES 2015, 01-02 December 2015, Melaka, Malaysia.

Ab Rahman, Rosdi and Kaamin, Masiri and Abd Aziz, Azizul Rahman and Shariff, Muhammad Syarafuddin and Mohamed Nor, Mohd Hadri and Mohamad, Mahmod Abd Hakim (2016) Alternative cooling system of zinc roofed food stall using river water resources. ARPN Journal of Engineering and Applied Sciences, 11 (6). ISSN 18196608

Abd Rahman, Hamimah and Yap , Ching Guan (2008) Characterization of alumina foam from casting process. In: International Conference on Mechanical and Manufacturing Engineering 2008 (ICME 2008), 21-23 Mei 2008, Johor Bahru, Johor, Malaysia.

Abd Wahab , Mohd Helmy and Md. Nor, Danial and Abdoll Mutalib, Afizah and Johari, Ayob and Sanudin, Rahmat Development of integrated e-parcel management system with GSM network. Proceedings of the 2nd International Conference on Interaction Sciences: Information Technology, Culture and Human .

Abd Wahab, Mohd Helmy and Md. Nor, Danial and Abdoll Mutalib, Afizah and Johari, Ayob and Sanudin, Rahmat Development of integrated E-Parcel management system with GSM network. Compilation of Papers 2009 - VOLUME 2 .

Abd.Y.Gandouz, Suliman (2011) Study of vortex trap on low aspect ratio wing with NACA 0015 cross section. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdul Jamil , Muhammad Mahadi (2015) Introduction to biomedical engineering research projects and case studies. Penerbit UTHM. ISBN 978-967-0764-27-6

Abdul Kadir, Herdawatie and Mohd Kanafiah, Siti Nurul Aqmariah and Abd. Wahab, Mohd Helmy and Tukiran, Zarina and Abdul Kadir, Zulida (2008) Online students supervision (OSS ) systems using passive RFID. In: International Conference on Electronic Design (ICED 2008), 1 - 3 December 2008, Penang, Malaysia.

Abdul Rahim, Mohd Hisyam (2013) Munāsabat al-Qur’ān: analisa dari aspek keindahan dan prospek masa hadapan. Al-Bayan, 11 (1). pp. 49-71. ISSN 2232-1950

Abdul Rahim, Mohd Hisyam and Mohd Yusoff, Zulkifli (2012) Shihab”s perspective on working women issue: an analysis in his book, Tafsīr, al-Misbāh. International Journal of Social Science and Humanity, 2 (1). ISSN 2010-3646

Abdul Rahman, Farah Azura and Sulaiman, Nilawati and Kamarolzaman, Nur Zakiah Hani and Azmi, Siti Aishah Tahap penggunaan ICT dan teknologi dalam pengurusan masjid dan surau. Kolej Universiti Tun Hussein Onn.

Abdul Shukor, Norhidayah (2004) Pembangunan modul pembelajaran AutocCAD dan kajian penerimaan pelajar: satu kajian kes di Politeknik Kota Bharu. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Abdull Sukor, Abdul Syafiq (2012) Speaker identification system using MFCC procedure and noise reduction method. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdullah, Sabirin and Mohd. Zain, Ahmad Faizal (2009) A 3-year observation of the ionospheric critical frequency over Malaysia. In: Malaysian Technical Universities Conference on Engineering and Technology (MUCEET 2009), 20-22 June 2009, Kuantan, Pahang.

Abdullah, Abdul Shukor and Abd Rahman, Mohd Nasrull (2009) Ergonomic assessment of working postures in semiconductor manufacturing processes. In: National Symposium on Advancements in Ergonomics and Safety (ERGOSYM2009), 1-2 December 2009, Perlis, Malaysia.

Abdullah, Farisal and Nayan, Nafarizal and Abdul Jamil , Muhammad Mahadi (2011) Failure analysis using IDD current leakage and photo localization for gate oxide defect of CMOS VLSI. In: Student Conference on Research and Development (SCOReD 2010), 13-14 December 2010, Putrajaya, Malaysia.

Abdullah, Hasan Zuhidi (2010) Titanium surface modification by oxidation for biomedical application. PhD thesis, University of New South Wales.

Abdullah, Jiwa and Paris, D.J. (2007) Node connectivity index as mobility metric for GA based QoS routing in MANET. Proceedings of the 4th international conference on mobile technology, applications, and systems and the 1st international symposium on Computer human interaction in mobile technology .

Abdullah, Mohd Ezree and Chik, Abdul Aziz and Hainin, Mohd Rosli and Ab Ghani, Ahmad Raqib and Ambak, Kamarudin and Md Yusoff, Nur Izzi Road accident information system development of Batu Pahat area. In: Malaysian Universities Transport Research Forum Conference, Disember 2006, Bangi.

Abdullah, Noorsaliza (2012) VHF adaptive antenna using a rear defogger. PhD thesis, Shizuoka University.

Abdullah, Norazlin and Chin, N. L. (2010) Simplex-centroid mixture formulation for optimised composting of kitchen waste. Bioresource Technology, 101 . pp. 8205-8210.

Abdullah, Norazlin and Nyuk, Ling Chin (2014) Application of thermosonication treatment in processing and production of high quality and safe-to-drink fruit juices. Agriculture and Agricultural Science Procedia, 2 . pp. 320-327.

Abdullah, Norazlin and Nyuk , Ling Chin and Mokhtar, Mohd Noriznan and Taip, Farah Saleena (2013) Effects of bulking agents, load size or starter cultures in kitchen-waste composting. International Journal Of Recycling of Organic Waste in Agriculture, 2 (3).

Abdullah, Sabirin (2011) Observations of f-region critical frequency variation over Batu Pahat, Malaysia, during low solar activity. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Abdullah, Zailani and Mat Deris, Mustafa Association rules mining with relative weighted support. Proceedings of the 11th International Conference on Information Integration and Web-based Applications & Services .

Abdullah , Mariam (2002) Keberkesanan penggunaan model dalam pengajaran dan pembelajaran Lukisan Geometri dan Binaan Bangunan mempengaruhi prestasi pelajar di sekolah menengah teknik. Masters thesis, Kolej Universiti Teknologi Tun Hussien Onn.

Abu Bakar, Mohd Fadzelly and Ismail, Nur Amalina and Isha, Azizul and Lee, Mei Ling Angelina (2016) Phytochemical composition and biological activities of selected wild berries (Rubus moluccanus L., R. fraxinifolius Poir., and R. alpestris Blume). Evidence-Based Complementary and Alternative Medicine . ISSN 1741427X

Adi Siswanto, Waluyo (2011) New design of pure titanium metal on metal total hip replacement with ion implanted wear resistance surface. Other thesis, Universiti Tun Hussein Onn Malaysia.

Adnan, Suraya Hani and Lee , Yee Loon and Abdul Rahman , Ismail and Mohd Saman, Hamidah and Soejoso, Mia Wimala (2008) Water permeability of micronised biomass silica concrete. In: International Graduate on Engineering and Science (IGCES'08), 23-24 December, 2008, Universiti Teknologi Malaysia, Sekudai, Johor.

Ahma, Afandi and Abbes , Amira and Rabah, Hassan and Berviller, Yves (2010) FPGA-based architectures of finite radon transform for medical image de-noising. In: Asia Pacific Conference on Circuits and Systems, Kuala Lumpur, Malaysia.

Ahmad, Abdull Zubi and Mohd. Zain, Ahmad Faizal (2009) Equatorial f-region plasma drift measurements and observations using doppler interferometry at Parit Raja. In: Malaysian Technical Universities Conference on Engineering and Technology (MUCEET 2009), 20-22 June 2009, Kuantan, Pahang.

Ahmad, Md Zarafi and Zamri, K. and Zulkifli, Shamsul Aizam and Hamdan, Rohaiza and Sulaiman, Erwan (2008) Energy saving in the implementing LED luminaries for internal lighting. In: The 2nd International Power Engineering and Optimization Conference (PEOCO2008) , 4-5 June 2008, Shah Alam, Selangor, Malaysia.

Ahmad , Abd Rahman and Rajuddin, Muhammad Rashid The characteristics of human barrier that affect the organization to translate strategy into action: balanced scorecard approach. In: International Conference on Human Capital Development (ICONHCD 2009), 25-27 Mei 2009, Kuantan, Pahang.

Ahmad , Afandi (2010) Efficient reconfigurable architectures for 3-D medical image compression. PhD thesis, Brunel University.

Ahmad Bakhtiar, Nur Suraya Anis (2011) Preliminary fabrication of biodegradable polymer membranes from renewable resources. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ahmad Puzi, Marliana Azura and Tuan Hassan, Tuan Noor Rafidah The effect of state factors on resilient modulus of bituminous mixture. In: Malaysian Universities Transport Research Forum Conference, Disember 2006, Bangi.

Ahmad Razali, Nazamuddin (2003) Penghasilan modul pembelajaran lukisan kejuruteraan berbantukan komputer. Masters thesis, Kolej Universiti Teknologi Tun Hussien Onn.

Ahmat Nor, Nor Irwan and Mohd Kassim, Amir Hashim and Harun, Sobri Adaptive multilayer perceptron model for hourly steamflow Hydrograph. Universiti Tun Hussein Onn Malaysia.

Akasah, Zainal Abidin and Alias, Maizam (2006) Bridging the spatial visualisation skills gap through engineering drawing using the whole-to-parts approach. In: 17th Annual Conference of the Australasian Association for Engineering Education, 10-13 December 2006, Auckland, New Zealand.

Al Aian, Ahmad Eshtiwey (2011) The aerodynamics analysis of type UAV aircraft with pusher engine configuration by use of DATCOM software. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ali, Ahmad Hadi (2008) Design and fabrication of high-precision x-translational and rotational controlled motorized stage (CMS). In: International Conference on Electric Design (ICED 2008), 1 - 3 December 2008, Penang, Malaysia.

Ali, Ahmad Hadi and Hassan, Zainurah and Shuhaimi, Ahmad (2016) High figure of merit of the post-annealed Ti/Al/ITO transparent conductive contacts sputter deposited on n-GaN. Journal of Alloys and Compounds, 681 . pp. 186-190. ISSN 0925-8388

Ali, Ashikin and Ghazali, Rozaida and Mat Deris, Mustafa (2011) The wavelet multilayer perceptron for the prediction of earthquake time series data. iiWAS '11 Proceedings of the 13th International Conference on Information Integration and Web-based Applications and Services .

Alias, Maizam (2006) The effect of teacher generated concept maps on learning of secondary school physics. In: Proc. of the Second Int. Conference on Concept Mapping, 2006, San José, Costa Rica, 2006.

Alias, Maizam and Akasah, Zainal Abidin and Kesot, Mohd Jahaya (2016) Relationships between locus of control, self-efficacy, efforts and academic achievement among engineering students. Advanced Science Letters, 68 (18004). ISSN 19366612

Alias, Maizam and M Saleh, Hasanul Hadi (2006) The effects Of problem-based learning on cognitive and generic skills development in mechanical engineering. In: Seminar Of The Effects Of Problem-based Learning On Cognitive And Generic Skills Development In Mechanical Engineering., 2006, Malaysian Technical Universities.

Alias, Maizam and Mohd Zain, Ahmad Faisal (2006) Relationship between entry qualifications and performance in graduate education. In: UNSPECIFIED.

Aliyu, Alhaji Abubakar and Tasmin, Rosmaini (2012) Information and communication technology in Nigerian Banks: Analysis of services and consumer reactions. In: International Conference on Business and Economic Research (3rd ICBER 2012), 12 - 13 March 2012., Bandung, Indonesia.

Ambak, Kamarudin (2011) Pemodelan persamaan struktur dalam intervensi kelakuan penggunaan topi keledar dengan betul. PhD thesis, Universiti Kebangsaan Malaysia.

Ambak, Kamarudin and Rosli, Naida and David, Basil Daniel and Prasetijo, Joewono (2015) Model penerimaan teknologi lanjutan bagi meramal keinginan menggunakan sistem peringatan topi keledar. Jurnal Teknologi, 77 (1). pp. 163-169. ISSN 2180-3722

Ambar, Radzi and Abdul Jamil, M. Mahadi (2012) Artificial hand gripper controller via smart glove for rehabilitation process. In: 2012 International Conference on Biomedical Engineering (ICoBE), 27 - 28 Feb 2012, Penang Malaysia.

Ameruddin, Amira Saryati and Caroff, P. and Tan, H. H. and Jagadish, C. and Dubrovskii, V. G. (2015) Understanding the growth and composition evolution of gold-seeded ternary InGaAs nanowires. Nanoscale, 7 . pp. 16266-16272. ISSN 2040-3364

Ameruddin, Amira Saryati and Fonseka, H Aruni and Caroff, Philippe and Wong-Leung, Jennifer and het Veld, Roy LM Op and Boland, Jessica L and Johnston, Michael B and Hark, Hoe Tan and Jagadish, Chennupati (2015) InxGa1−xAs nanowires with uniform composition, pure wurtzite crystal phase and taper-free morphology. Nanotechnology, 26 . pp. 1-10. ISSN 0957-4484

Anggono, Agus Dwi and Besar Riyadi, Tri Widodo and Siswanto, Waluyo Adi (2014) Dynamic explicit finite element code for u-bending simulation and springback prediction. Applied Mechanics and Materials , 660 (2014). pp. 337-341. ISSN 1660-9336

Anjang Ahmad, Mustaffa and Lam , Kang Wei Development of Essol-V2 for engineering survey calculations. In: FEIIC Seminar on Engineering and Technology 2006, 4-5 September 2006 , Putrajaya.

Arifin, Kadir and Aiyub, Kadaruddin and Awang, Azhar and Rizal Razman, Muhamad (2010) Sistem pengurusan keselamatan dan kesihatan pekerjaan (OSHAH:18001) analisis kepada penerimaan faedah pelaksanaannya kepada organisasi di Malaysia. Journal of Techno Social, 1 (1). pp. 17-31. ISSN 1985-9740

Azizan, Ashraf Zulfa (2012) Structural equation modelling and system dynamic in the detection of power quality events. Masters thesis, Universiti Tun Hussein Onn Malaysia.

B

B. Kasim, N. (2010) Towards a framework for ict-enabled materials management in complex projects. Journal of Techno-Social, 2 (1). pp. 11-22.

Baba, Ishak and Md Ali, Zarina and Abu Bakar, Nurdiana Ashraf and Ramly, Mohmad Zairi (2011) Determination of noise exposure level at construction area. In: International Seminar on Application of Science Matehmatics 2011, 1 - 3 November 2011, Putra World Trade Centre, KL, Malaysia.

Bahrim, Fatihah Shafiqah and Sulaiman, Erwan and Jusoh, LailiIwani and Omar, M. Fairoz and Kumar, Rajesh (2016) Cogging torque reduction of IPM motor using skewing, notching, pole pairing and rotor pole axial pairing. In: IPN Conferences 2016, 01-02 August 2016, Langkawi Seaview Hotel, Langkawi, Kedah.

Bakri, Razali (2012) Investigation of tool wear and surface finish in turning process using various cutting condttion. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Basri, Hatijah (2012) Development of hybrid antibacterial membrane by incorporating silver particle with 2,4,6-triaminopyrimidine as compatibilizer. PhD thesis, Universiti Teknologi Malaysia.

Basril, Hatijah and Ismail, Ahmad Fauzi and Aziz, Madzlan Assessing the effect of PVP of Various Molecular Weight (MW) in PES-Ag Membranes: antimicrobial study using E.Coli. Journal of Science and Technology . ISSN 2229-8460

Bon, Abdul Talib and Basiron, Muhammad An’nur (2012) Quality control software for managers. In: International Conference on Business and Economic Research (3rd ICBER 2012), 12 - 13 March 2012., Bandung, Indonesia.

Bon, Abdul Talib and Chin, Vin Dee (2016) Challenges of green supply chain management in Malaysia. In: IPN Conferences 2016, 01-02 August 2016, Langkawi Seaview Hotel, Langkawi, Kedah.

Burvill, Colin and Field, Bruce and Abdullah, Zulkeflee and Alias, Maizam (2016) Problem-solving with industrial drawings: supporting formal graphics language development for Malaysian engineering graduates. International Journal of Engineering Education, 32 (5). pp. 2172-2183. ISSN 0949149X

D

Daud, Zawawi and Mohd Hatta, Mohd Zainuri and Mohd Kassim, Angzzas Sari and Awang, Halizah and Mohd Aripin, Ashuvila (2014) Exploring of agro waste (pineapple leaf, corn stalk, and napier grass) by chemical composition and morphological study. BioResources, 9 (1). pp. 872-880. ISSN 1930-2126

E

Embong, Zaidi and Jamari, Suhailly and Mohamed Johar, Saffuwan and Ahmad Tajudin, Saiful Azhar (2015) The assessment of heavy metal concentration in river bank soil under the effect of electrokinetic-assisted phytoremediation using XRF and EDX analysis. Jurnal Teknologi, 77 (30). pp. 133-137. ISSN 2180-3722

H

H., Saleh and R., Roslan and I. , Hashim (2011) Natural convection heat transfer in a nanofluid-filled trapezoidal enclosure. International Journal of Heat and Mass Transfer, 54 . ISSN 00179310

Hafit, Hanayanti and Kamaludin, Hazalila and A Hamid, Isredza Rahmi and Mohd Sukri, Khairul Amin and Mohd Haris, Noor Farah Shahida (2008) A prototype of server’s temperature monitoring system using ADAM and ADAMView. In: International Conference on 17th – 19th November 2008 Information Technology and Multimedia at UNITEN (ICIMU’ 2008), 18 - 19 November 2008, Bangi, Selangor.

Hamid Ali, Firkhan Ali and Abd. Wahab, M. Tarmizi (2010) Sistem maklumat pengujian keselamatan teknologi maklumat berasaskan OSSTMM. In: SEMINAR KEBANGSAAN SAINS KOMPUTER DAN MATEMATIK (SKSKM 2010) , 21-22 DISEMBER 2010, Kompleks Pentadbiran Kerajaan Persekutuan Sabah.

Hamid Ali, Firkhan Ali and Yee , Yong Len (2011) Development of host based intrusion detection system for log files. In: 2011 IEEE Symposium on Business, Engineering and Industrial Applications (ISBEIA), 25 - 28 September 2011, Bayview Hotel Langkawi Malaysia.

Hanafi, Dirman and Emhemed, A. A. Abdulrahman Control modes comparison results focused on real heat exchanger system response. International Journal of Integrated Engineering . ISSN 2229-838X

Hanafi, Hafizul Fahri and Joe Meyer, Cassidy Meyer and Abd Wahab, Mohd Helmy and Abdul Kadir, Herdawatie PEAS: portable examination attendance system: a proposal. Compilation of Papers 2009 - VOLUME 2 .

Hashim, Mohd Nurhanif (2008) Simulation model for effective supply chain management using arena. Masters thesis, Universiti Tun HUssein Onn Malaysia.

Hashim, Hairulazwan and Abdul Kadir, Herdawatie and Abd Wahab, Mohd Helmy Implementation of real time monitoring using ethernet for teaching automation network system. Compilation of Papers 2009 - VOLUME 2 .

Hassan, M.Y. and Radzi, N.H. and Abdullah, M.P. and Hussin, F. and Majid, M.S. Wheeling charges methodology for deregulated electricity markets using tracing-based postage stamp methods. International Journal of Integrated Engineering . ISSN 2229-838X

Hj. Mohd, Mohd. Norzali and Abd Wahab, Mohd Helmy and Yaakob, Amir (2008) ‘Halal’ logo detection and recognition system. In: 4th International Conference on Information Technology and Multimedia (ICIMU' 2008), Malaysia, Universiti Tenaga Nasional (UNITEN).

Hussaini, Muazan (2012) Application multicriteria decision making method to determine the placement of auto recloser circuit breaker in power distribution system. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Hussin, Mohd Sabri (2003) Pembinaan web CD pembelajaran bagi mata pelajaran lukisan berbantukan komputer (AutoCAD) dalam penghasilan permodelan 3D. Masters thesis, Kolej Universiti Teknologi Tun Hussien Onn.

I

Ibrahim, Mohd Norihan and Siswanto, Waluyo Adi and Ahmad Zaidi , Ahmad Mujahid (2014) Numerical study on failure process of aluminium plate subjected to normal impact by hemispherical projectiles. Applied Mechanics and Materials , 660 (2014). pp. 598-602. ISSN 1660-9336

Ibrahim, Noraini and Ibrahim, Rosziati and Mansor, Dzahar Well formedness rules for UML use case diagram. Universiti Tun Hussein Onn Malaysia.

Ibrahim , Mohd Halim Irwan (2012) Kebolehacuanan suntikan logam mikro SS 316L menggunakan bahan pengikat PEG dan PMMA. PhD thesis, Universiti Kebangsaan Malaysia.

Ibrahim , Mustafa and Saude, N. and Ghafir, M.F.A. and Zain, N.M. Palm oil-based fly ash for freeform fabrication of prototypes using 3D printer. In: Proceedings of the 2009 International Symposium on Advanced Engineering (ISAE 2009), 19-21 March 2009, Busan, South Korea.

Inam, M. and Ismail , M.Y. Numerical analysis and equivalent circuit modeling for loss quantification of reflectarrays using different substrate materials. Compilation of Papers - VOLUME 1 .

Ishaq, Aisha Gogoba and Matias-Peralta, Hazel Monica and Basri, Hatijah and Muhammad, Muhammad Nmaya (2015) Antibacterial activity of freshwater microalga scenedesmus sp. on foodborne pathogens staphylococcusaureus and salmonella sp. Journal of Science and Technology, 7 (2). ISSN 19858809

Ismail, Al Emran (2008) Sound generated during the compaction of alumina reinforced aluminum powders. In: International Colloquium on Signal Processing and its Applications, 7 - 9 March 2008, Kuala Lumpur.

Ismail, Fadillah (2016) Faktor keharmonian dan keruntuhan rumah tangga. In: Persidangan Kebangsaan Ekonomi Malaysia ke-11 (PERKEM) 2016, 27-28 July 2016, Dewan Persidangan, Kementerian Kewangan Malaysia (MOF) & Hotel Bangi-Putrajaya, Bandar Baru Bangi, Selangor.

Ismail, Fadillah and Markom, Nasir (2016) Kompetensi jurulatih XYZ. In: Persidangan Kebangsaan Ekonomi Malaysia ke-11 (PERKEM) 2016, 27-28 July 2016, Dewan Persidangan, Kementerian Kewangan Malaysia (MOF) & Hotel Bangi-Putrajaya, Bandar Baru Bangi, Selangor.

Ismail, Lokman Hakim and Sibley, Magda and Abdul Wahab, Izudinshah Bioclimatic technology in high rise office building design: a comparison study for indoor environmental condition. Journal of Science and Technology . ISSN 2229-8460

Ismail, Nurul Izzatty and Abdullah, Nor Hazana (2012) An overview of Hospital Information System (HIS) implementation in Malaysia. In: International Conference on Business and Economic Research (3rd ICBER 2012), 12 - 13 March 2012., Bandung, Indonesia.

Ismail, Nurul Izzatty and Abdullah, Nor Hazana and Shamsuddin, Alina and Nik Ariffin, Nik Azliza (2013) Implementation differences of hospital information system (HIS) in Malaysian public hospitals. International Journal of Social Science and Humanity, 3 (2).

J

Jacob, Alvin and Wan Zakaria, Wan Nurshazwani and Md Tomari, Mohd Razali (2016) Implementation of IMU sensor for elbow movement measurement of badminton players. In: 2016 2nd IEEE International Symposium on Robotics and Manufacturing Automation (IEEE 2016), 25-27 September 2016, Universiti Teknologi Petronas, Perak.

Jamian, Saifulnizan (2012) Application of functionally graded materials for severe plastic deformation and smart materials ―experimental study and finite element analysis―. PhD thesis, Nagoya Institute of Technology.

Johar, Siti Sarawati (2015) Impact of regulation and management of emotion through self-esteem towards employee commitment. International Journal of Multidisciplinary Thought, 5 (2). pp. 259-265. ISSN 2156-6992

Johar, Siti Sarawati Kepentingan penguasaan kecerdasan emosi (EQ) pelajar luar bandar : harapan dan cabaran dalam pembentukan modal insan berjiwa kelas pertama. In: International Conference on Human Capital Development (ICONHCD 2009), 25-27 Mei 2009, Kuantan, Pahang.

Johari, Ayob and Tean, T.G. and Ayob, Mohd Erdi and Md Noor, D. Performance Evaluation of Digital Radio Broadcasting Frequency Chebyshev CLF and HPF Designs Using ROGER 4003C. In: TISD 2006, Technology and Innovation for Sustainable Development Conference , 25-26 January 2006, Thailand.

Juki, Mohd Irwan and Othman, Norzila and Koh , Heng Boon and R. M., Asyraf and Khalid, Faisal Sheikh and Mahamad, Mohd Khairil Annas and A. M., Shahrizan (2013) Development of mix design nomograph for polyethylene terephthalate fiber concrete. Applied Mechanics and Materials , 253 (1). pp. 408-416. ISSN 1660-9336

Jumaat, Siti Amely and Mohd. Mujib, Siti Zarina and Ahmad, Ida Laila and Tukiran, Zarina and Jamaluddin, Jailani and Isa, Khalid and Fuad, Norfaiza and Mohamed, Masnani and Mohamad, Shamsul (2008) Mengkaji keberkesanan Program Budaya Ilmu “Effective Presentation & Engineering Report Writing” ke atas pelajar. In: Persidangan Pembangunan Pelajar Peringkat Kebangsaan 2008, 22-23 Oktober 2008, Universiti Teknologi Malaysia.

Jumadi, N.A. and Gan, K.B. and Mohd Ali, M.A. and Zahedi, E. (2011) Determination of reflectance optical sensor array configuration using 3-layer tissue model and monte carlo simulation. In: The 9th International Conference on Modelling in Medicine and Biology, 26 - 28 July 2011, Riga, Latvia.

K

KSM Kader Ibrahim, Babul Salam (2011) Modelling and control of paraplegic’s knee joint (FES-SWINGING). PhD thesis, University of Sheffield.

Kamarudin, Muhammad Saufi and Sulaiman, Erwan and Ahmad, Md Zarafi and Zulkifli, Saiful Aizam and Othman, Ainul Faiza (2008) Impulse generator and lightning characteristics simulation using orcad PSpice software. In: 2nd Regional Engineering Conference 2008 (EnCon 2008), 18-19 December 2008, Kuching, Sarawak, Malaysia. (Submitted)

Kandasamy, Ramasamy and Mohammad, R. and I., Muhaimin (2016) Carbon nanotubes on unsteady MHD non-Darcy flow over porous wedge in presence of thermal radiation energy. Applied Mathematics and Mechanics (English Edition), 37 (8). pp. 1031-1040. ISSN 02534827

Kandasamy, Ramasamy and Muhaimin, Ismoen (2015) Impact of thermal stratification on unsteady hiemenz non-darcy copper nanofluid flow over a porous wedge in the presence of magnetic field due to solar radiation (green) energy. Chemical and Process Engineering Research, 36 . pp. 31-46. ISSN 2224-7467

Kaprawi, Noraini and Razzaly , Wahid and Md. Yunos, Jailani and Ali, Mahazani (2011) Development of a new empirical based competency profile for Malaysian Technical Vocational Education and Training Instructors. Other thesis, Universiti Tun Hussein Onn Malaysia.

Kasabov, Nikola and Scott, Nathan Matthew and Tu, Enmei and Marks, Stefan and Sengupta, Neelava and Capecci, Elisa and Othman, Muhaini and Doborjeh, Maryam and Murli, Norhanifah and Hartono, Reggio and Espinosa-Ramos, Josafath Israel and Lei, Zhou and Alvi, Fahad Bashir and Wang, Grace and Taylor, Denise and Feigin, Valery and Gulyaev, Sergei and Mahmoud, Mahmoud and Hou, Zeng-Guang and Yang, Jie (2016) Evolving spatio-temporal data machines based on the neucube neuromorphic framework: design methodology and selected applications. Neural Networks, 78 . pp. 1-14. ISSN 08936080

Kek , Sie Long (2011) Integrated optimal control and parameter estimation algorithms for discrete-time nonlinear stochastic dynamical systems. PhD thesis, Universiti Teknologi Malaysia.

Kek , Sie Long and Leong, Wah June and Teo, Kok Lay (2016) Conjugate gradient approach for nonlinear optimal control problem with model-reality differences. In: The 10th International Conference on Optimization: Techniques and Applications (ICOTA 10), 23-26 July 2016, Ulaanbaatar, Mongolia.

Kolop, Roslan and W. I.M, Haziman and Eng, J. W. Properties of cement blocks containing high content of oil palm empty fruit bunches (EFB) fibres. In: International Conference on Civil Engineering Practice (ICCE08).

L

Lai , Zhe Phooi and Zainodin , Haji Jubok and Rozaini , Roslan and Ishak , Hashim (2010) Steady flow about a sphere in a porous medium subject to an oscillating temperature. Journal of Science and Technology, 3 (1). pp. 1-19. ISSN 2229-8460

Lias, Jais (2011) Study on application of UV-processed molecular alignment in liquid crystal devices. PhD thesis, Nagaoka University of Technology.

M

M. I., Enwelum and Sulaiman, Erwan and Liew, Chung Peng (2016) A new outer rotor permanent magnet flux switching machine using segmental rotor for electric scooter. In: IPN Conferences 2016, 01-02 August 2016, Langkawi Seaview Hotel, Langkawi, Kedah.

M. Rozlan, S. A. and Zaman, Izzuddin and Manshoor, Bukhari and Khalid, A. and Chan, Shiau Wei and M. Sani, M. S. (2016) Theoretical modelling of a beam with attached spring-mass-damper system. In: International Conference on Automotive Innovation and Green Energy Vehicle (AiGEV2016), 02-03 August 2016, Malaysia Automotive Institute, Cyberjaya.

M.T., Razali and Rahmat, Hafize and Abdul Kadir, Herdawatie and Abd Wahab, Mohd Helmy The implementation of embedded vision system for line follower navigation. Compilation of Papers 2009 - VOLUME 2 .

M.Z, Nur Shaylinda and R.M, Raden Maya Saphira and Md. Ali, Zarina and Mohd Roshidi , Mohd Roshidi and Mohd Arif , Mohd Arif and Zainalabidin, Mohd Hazreek (2008) Study on concentration of PM10 and PM2.5 particulate matter in UTHM campus by using E-sampler. In: International Conference on Environment (ICENV2008), 15-17 Disember 2008, Pulau Pinang.

Mad Sahar, Nan (2010) Risk management for safety operation utilizing virtual reality simulation supported by intelligent HAZOP analysis. PhD thesis, Okayama University.

Mahamad, Abd Kadir (2010) Diagnosis, classification and prognosis of rotating machine using artificial intelligence. PhD thesis, Kumamoto University.

Mahmud , Farhanahani (2011) Real-time simulation and control of spatio-temporal cardiac excitation using an analog-digital hybrid circuit model. PhD thesis, Osaka University.

Manshoor, Bukhari Domain decomposition method for solving incompressible fluid flow and energy equations using distributed parallel computer system. In: First Regional Conference On Computational Science and Technologies, 29 - 30 Nov 2007, Universiti Malaysia Sabah.

Marzuki, Mazdi and Mohamad, Jamilah Mod pengangkutan ke sekolah: satu kajian pilihan pelajar-pelajar sekolah menengah di Hulu Langat. In: Malaysian Universities Transport Research Forum Conference, Disember 2006, Bangi.

Masood, Ibrahim (2012) A scheme for balanced monitoring and accurate diagnosis of bivariate process mean shifts. PhD thesis, Universiti Teknologi Malaysia.

Masood, Ibrahim and Hassan, Adnan (2008) Application of full factorial experiment in designing an ANN-based control chart pattern recognizer. In: International Graduate on Engineering and Science (IGCES'08), 23-24 December, 2008, Universiti Teknologi Malaysia, Sekudai, Johor.

Mazlan, M.H. and Abu Osman, N.A. and Wan Abas, W.A.B. (2011) HIp 3D Joint Mechanics Analysis of Normal and Obese Individuals’ Gait. In: The 9th International Conference on Modelling in Medicine and Biology, 26 - 28 July 2011, Riga, Latvia.

Md Fudzee, Mohd Farhan and Abawajy, Jemal (2008) A classification for content adaptation system. iiWAS '08 Proceedings of the 10th International Conference on Information Integration and Web-based Applications & Services .

Md Fudzee, Mohd Farhan and Abawajy, Jemal (2008) A classification for content adaptation system. Proceedings of the 10th International Conference on Information Integration and Web-based Applications & Services .

Md Seri, Suzairin (2009) Numerical simulation of jet impingement cooling on a smooth concave surface. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Md Yusoff, Rosman and Kazi, Abdul Ghafoor and Arisar, Muzammil Muhammad Khan and Jamil, Farhan and Hishan, Sanil S. (2016) Role of integrity in the success of freelancing and entrepreneurship : a conceptual review. International Review of Management and Marketing (IRMM), 6 (S4). pp. 250-254. ISSN 2146-4405

Misdan, Nurasyikin and Ismail, Ahmad Fauzi and Nidal, Hilal (2016) Recent advances in the development of (bio)fouling resistant thin film. Desalination, 380 . pp. 105-111. ISSN 00119164

Misdan, Nurasyikin and Lau, W.J. and Ismail, A.F. and Matsuura, T. and Rana, D. (2014) Study on the thin film composite poly(piperazine-amide) nanofiltration membrane: Impacts of physicochemical properties of substrate on interfacial polymerization formation. Desalination, 344 . pp. 198-205. ISSN 0011-9164

Mohamad, Mahathir (2012) Soliton Cellular Automata constructed from a Uq(Dn(1)n)-Crystal Bn,1 and Kirillov-Reshetikhin type bijection for Uq(E6(1))-Crystal B6,1. PhD thesis, Osaka University.

Mohamad, Mahmod Abd Hakim and Basri, S. and Abd. Rahim, I. and Mohamad, M. An ausm-based third-order compact scheme for solving Euler Equations. In: FEIIC Seminar on Engineering and Technology 2006, 4-5 September 2006 , Putrajaya.

Mohamad Ramli, Nurul Akmar and Kamarudin , Muhammad Saufi and Joret , Ariffuddin Iris recognition for personal identification. In: The International Conference on Electrical Engineering 2008.

Mohamed, Maryati and Abu Bakar, Mohd Fadzelly and Linatoc, Alona Cuevas and Sabran, Siti Fatimah and Tokiman, Lili and Wan Abd Majid, Wan Amir Jeffery (2015) A strategy for plant conservation in Johor plant chemical library. Jurnal Teknologi, 77 (31). pp. 71-74. ISSN 2180-3722

Mohamed Ali, Riyaz Ahmad and Mohamed, Ahmad Nasrull and Nayan, Nafarizal Effect of thermal processes on al thin film in the present of nitrogen (N2) gas. Compilation of Papers - VOLUME 1 .

Mohamed Issa , Abdanaser (2011) Rate adaptation in IEEE 802.11 WLAN based on neural network. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohamed Shukri, Fahthul Hedzri and Aman, Mohamad Yusri and Baharudin Tajul , Mohamad Faizal and Md Rohani, Munzilah The use of recycled concrete aggregate as an aggregate in rigid pavement. In: TISD 2006, Technology and Innovation for Sustainable Development Conference, 25-26 January 2006, Thailand.

Mohd, Mohd Norzali and Abd Wahab, Mohd Helmy and Yaakob, Amir (2008) ‘Halal’ logo detection and recognition system. In: 4th International Conference on Information Technology and Multimedia (ICIMU' 2008), Malaysia, 17-19 November 2008, Universiti Tenaga Nasional (UNITEN).

Mohd Amin, Azriszul and Md Seri, Suzairin and Raghavan, Vijay R. (2007) Study of the temperature distribution in disc brakes by the method of order-ofmagnitude analysis. In: Regional Conference on Engineering Mathematics, Mechanics, Manufacturing & Architecture (EM*ARC) 2007, 27- 28 November 2007, National University of Malaysia.

Mohd Faiz, Nur Sofurah and Mamat, Norsuhaila and Mohamed, Maziana and Burhannuddin, Mohd Faiz Solutions on students’ dissatisfaction towards PBL implementation in engineering education. In: FEIIC Symposium on Engineering and Technology, Kuching, Sarawak, Malaysia, 15-16 December 2008.

Mohd Faiz, Nur Sofurah and Mamat, Norsuhaila and Mohamed, Maziana and Sulong, Muhammad Suhaimi Perceptions and acceptance towards PBL approach: a case study on technical & vocational Students. In: Paris International Conference on Education, Economy & Society, 17-19 July 2008, Paris, France.

Mohd Jidi, Kamarolzaman (2011) Kesesuaian homestay sebagai Pusat Latihan Pendidikan Luar di Johor Darul Ta'zim. PhD thesis, Universiti Selangor.

Mohd Mohsin, Mohd Farhan and Abd Wahab, Mohd Helmy (2008) Comparing the knowledge quality in rough classifier and decision tree classifier. In: International Symposium on Information Technology 2008, Kuala Lumpur Convention Centre, Kuala Lumpur, Malaysia.

Mohd Nawi, Nazri and Ghazali, Rozaida and Mohd Salleh, Mohd Najib Performance improvement of back propagation neural network learning algorithms by introducing gain variation of activation function. Universiti Tun Hussein Onn Malaysia.

Mohd Nor, Ihkasan and Siti Norfazelah, Mohd Nor and Mohd Hamim, Sanusi and Mohd Som, Mohammad (2010) The development of UCITV (university campus interactive television) : UTHM experience. In: World Congress on Teacher Education for TVET in conjunction with World Teachers Day Celebration, 5 - 6 10 2010, Universiti Tun Hussein Onn Malaysia.

Mohd Nor , Mohd Khir (2016) Modelling inelastic behaviour of orthotropic metals in a unique alignment of deviatoric plane within the tress space. International Journal of Non-Linear Mechanics . ISSN 00207462

Mohd Nor , Mohd Khir (2016) Unique rotation tensor formulation to predict three-dimensional deformation behaviour of aluminum alloy AA7010. International Journal of Mechanical & Mechatronics Engineering IJMME-IJENS, 16 (04).

Mohd Rohani, Jafri and Mohd Yusof, Sha'ri and Mohamad, Ismail (2009) Statistical process control success factors and performance: An exploratory analysis. In: Advances in Quality Engineering and Management Reserch (2009), 27 July 2009, Universiti Teknologi Malaysia.

Mohd Saleh, Norazila (2012) Study on the ionogram variation at different solar activity and earthquake occurrence. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Salikon, Mohd Zaki UTHM Security unit scheduling using genetic algorithm. Universiti Tun Hussein Onn Malaysia.

Mohd Sayegh, Ahmed and Mohamed Jenu, Mohammad Zarar (2016) Prediction of common-mode radiation from cables attached to PCB using imbalance difference and asymmetrical dipole antenna models. Electronic Letter, 52 (8). pp. 585-587. ISSN 00135194

Mohd Tobi, Abd Latif and Leen, S. B. and Sun, W. and Shipway, P.H. (2016) Investigation on the plasticity accumulation of Ti-6Al-4V fretting wear through decoupling the effect of wear and surface profile in finite element modelling. In: 43rd Leeds-Lyon Symposium, 06-09 September 2016, Leeds, United Kingdom.

Mohd Tobi, Abdul Latif and Sun, W. and Shipway, P.H. (2016) Evolution of plasticity-based wear damage in gross sliding fretting of a non-conforming Ti-6Al-4V contact. In: 43rd Leeds-Lyon Symposium, 06-09 September 2016, Leeds, United Kingdom.

Mohd Yusof, Khairul Nizar and Lee , Yee Loon and Phuai , Phei Guan and Ahmad Tajuddin, Saiful Azhar The correlations between chemical and index properties for soft clay of Peninsular Malaysia. In: TISD 2006, Technology and Innovation for Sustainable Development Conference , 25-26 January 2006, Thailand.

Mohd Yusof, Khairul Nizar and Phuah , Phei Guan and Ridzuan, Mohd Baharudin The chemical properties of soft clay in KUiTTHO at Southern Peninsular Malaysia. In: FEIIC Seminar on Engineering and Technology 2006, 4-5 September 2006 , Putrajaya.

Muhaimin, Ismoen and Kandasamy, Ramasamy and Khamis, Azme and Rozaini , Roslan (2014) Retraction of “Influence of thermophoresis particle deposition and chemical reaction on unsteady non-Darcy MHD mixed convective flow over a porous wedge in the presence of temperature-dependent viscosity”. Journal of Mechanical Science and Technology, 28 (1). ISSN 1738-494X

Muhammad Nmaya, Muhammad and Gogoba, Ishaq Aisha and Agam, Mohammed Arif and Matias-Peralta, Hazel Monica and Khaled, Nadiah and Yabagi, Jibrin Alhaji and Kimpa, Muhammad Isa (2015) Biosorption of heavy metals by scenedesmus sp. isolated from the temporary waters of Endau Rompin, Johor, Malaysia. Jurnal Teknologi, 77 (24). pp. 35-38. ISSN 2180-3722

Mustapa, Mohammad Sukri and M. , Jayaprakash and Y. , Mutoh and T. , Sadasue (2008) In-situ observation of fatigue crack growth behavior of microstructure controlled steel. In: International Conference on Mechanical and Manufacturing Engineering 2008 (ICME 2008), 21-23 Mei 2008, Johor Bahru, Johor, Malaysia.

N

Nawi, Ismail and Siswanto, Waluyo Adi and Ismail, Al Emran (2014) A study of auto pour in sand casting process. Applied Mechanics and Materials , 660 (2014). pp. 74-78. ISSN 1660-9336

Nayan, Nafarizal and Sanudin,, Rahmat and Tengku Ibrahim, Tengku Nadzlin (2009) An introduction to optical emission spectroscopy and laser-aided spectroscopy techniques for low-temperature plasma analyses. In: Malaysian Technical Universities Conference on Engineering and Technology (MUCEET 2009), 20-22 June 2009, Kuantan, Pahang.

Nayan, Nafarizal and Takadab, N. and Sasaki, K. Laser-aided diagnostics of atoms and particulates in magnetron sputtering plasmas. Compilation of Papers - VOLUME 1 .

Ng, Seow Chian and Abdul Hamid, Nor Aziati and Mohd Yusof, Sha'ri (2016) Factors affecting implementation of green manufacturing for Malaysian automobile manufacturers: a literature review from 2010 until 2015. In: International Conference on Humanities and Technology (ICOHAT 2016), 17-18 August 2016, Avillion Legacy Melaka Hotel.

Ngadiman, Yunos and Hussin, Burairah and Abdul Hamid, Nor Aziati (2016) Computation of overall equipment effectiveness towards growing the productivity performance in manufacturing industry. In: World Conference on Engineering and Applied Science 2016, 28-29 May 2016, Hotel Bangi-Putrajaya, Bandar Baru Bangi, Selangor.

Nicholl, Paul and Ahmad , Afandi and Amira, Abbes (2010) Optimal discrete wavelet transform (DWT) features for face recognition. In: IEEE Asia Pacific Conference on Circuits and Systems, Kuala Lumpur, Malaysia.

Nor Shahida, Mohd Shah and Matsumoto , Masayuki Time-interleaved multi-channel all-optical regeneration based on higher-order four-wave mixing. Compilation of Papers - VOLUME 1 .

Nordin, Nor Azarina and Mohd. Muji, Siti Zarina and Abd Wahab, Mohd Helmy and Ahmad, Muhammad Syukri Embedded web server for infra red remote control. In: International Conference on ICT for the Muslim World ICT4M 2006, 21-23 November 2006, Kuala Lumpur.

Nordin, Nor Azarina and Mohd. Mujib, Siti Zarina and Abd Wahab, Mohd Helmy and Syukri Ahmad, Muhammad Embedded web server for infra red remote control. In: International Conference on ICT for the Muslim World ICT4M 2006, 21-23 November 2006, Kuala Lumpur.

O

Omar, Siti Sarah and Arokiasamy, Lawrence The background and challenges faced by the small medium enterprises: a human resource development perspective. In: International Conference on Human Capital Development (ICONHCD 2009), 25-27 Mei 2009, Kuantan, Pahang.

Othman, Abd Rashid and Seswoya, Roslinda and Hamdan, Rafidah and Kassim, Angzzas Sari Mohd and Abdul Kadir, Aeslina and N, Othman (2011) Ruminant bacteria sequester cod from chicken-processing wastewater. In: International Seminar on the Application of Science & Mathematics 2011, 1 - 3 November 2011, Putra World Trade Centre, KL, Malaysia.

Othman, Ahmad and Mok , Cheak Lieng Relationship between quality of work life (QWL) and job satisfaction: a case study of enterprise “XYZ” in Malacca. In: International Conference on Human Capital Development (ICONHCD 2009), 25-27 Mei 2009, Kuantan, Pahang.

Othman, Hussain and Mohd Salleh, Berhannudin and Sulaiman, Abdullah and Syed Abdullah, Syed Muhammad Dawilah al-Edrus PBL as a powerful teaching and learning tool to enhance humanistic skills among undergraduates. In: International Conference on Human Capital Development (ICONHCD 2009), 25-27 Mei 2009, Kuantan, Pahang.

P

Phang, Chang and Phang, Piau (2008) Haar wavelet penyelesaian bagi masalah nilai sempadan. In: Seminar Kebangsaan Matematik & Masyarakat 2008, 13-14 Februari 2008, Kuala Terengganu .

Ponniran, Asmarashid and Mat Sor, Azila Nor Azrani and Joret, Ariffuddin and Munir, Handy Ali Development of vehicle lighting system using LED application. International Journal of Integrated Engineering . ISSN 2229-838X

Putrasari, Yanuandri (2011) Preparation of nio catalyst on fecral substrate using various techniques at higher oxidation process. Masters thesis, Universiti Tun Hussein Onn Malaysia.

R

Raja Aris, Raja Siti Nur Adiimah (2011) Simulation of a variable speed brushless DC motor using neural network controller. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ramli, Azizul Azhar and Arbaiy, Nureize Hierarchical fuzzy rule-based model for teaching performance evaluation. In: ICT4M 2006 International Conference on ICT for the Muslim World, 21-23 November 2006, Kuala Lumpur.

Ramli, Azizul Azhar and Arbaiy, Nureize Hierarchical fuzzy rule-based model for teaching performance evaluation. In: International Conference on ICT for the Muslim World ICT4M 2006, 21-23 November 2006, Kuala Lumpur.

Ramli , Azizul Azhar and Suhaimi, Nur Suhailin (2008) Expert system for oil-palm disease diagnosis(Peka-Sawit). In: Proceeding of 1st Regional Conference on Computational Science and Technology (RCCST-2007), Nov 2007, Kota Kinabalu, Malaysia.

Razali, Mohd Azahari and Sapit, Azwan and Mohd Ali, Mas Fawzi and Khalid , Amir and Mohammed, Akmal Nizam (2014) Measurement of thermophoretic velocity in surrounding gas of nitrogen or carbon dioxide. Applied Mechanics and Materials, 554 . pp. 686-690. ISSN 1662-7482

Razali, Muhammad Najib and I.Y, Sahir and S.H, Othman (2004) The design at best practice framework in ICT concepts in facilities management. In: Uniten International Business Management Conference, Hyaat Regency Hotel Kuantan Pahang.

Riza, Fetra Venny Application of RHA's pozzolanic properties in the making of CEB. International Journal of Sustainable Construction Engineering & Technology . ISSN 2180-3242

Robani, Rafidah and Chee, Ming Chan (2008) Unconfined compressive strength of clay stabilized with cement-rubber chips. In: Seminar on Unconfined compressive strength of clay stabilized with cement-rubber chips, 2008, UTHM.

Rosli, Mohd Azwan Azim and Abd Wahab, Mohd Helmy and Sanudin, Rahmat and Sahdan, Mohd Zainizan A hardware based approach in designing infrared traffic light system. In: International Symposium on Information Technology 2008, Kuala Lumpur Convention Centre, Kuala Lumpur, Malaysia.

Rosli, Aizat Akmal and Ahmad, Kamilah (2016) The relationship between firms characteristics and capital structure, case study: among Malaysian public listed companies. In: International Conference on Humanities and Technology (ICOHAT 2016), 17-18 August 2016, Avillion Legacy Melaka Hotel.

Rosli, Naida and Ambak, Kamarudin and David , Basil Daniel and Prasetijo, Joewono (2015) Penerimaan sistem penguatkuasaan automatik (AES) dalam kalangan pemandu menggunakan model penerimaan teknologi. Jurnal Teknologi, 75 (1). pp. 1-6. ISSN 2180-3722

Rusiman, Mohd Saifullah and Adnan, Robiah and Nasibov, Efendi N. and Jacob, Kavikumar (2011) Modification of continuous and binary ICU data in form models. In: International Seminar on the Application of Science & Mathematics 2011, 1 - 3 November 2011, Putra World Trade Centre, KL, Malaysia.

S

S A, Jumaat and Musirin, Ismail and Othman, Muhammad Murtadha and Mokhlis, Hazlie (2011) PSO based technique for loss minimization considering voltage profile and cost function. In: The 5th International Power Engineering and Optimization Conference (PEOCO2011), 6-7 June 2011, Shah Alam, Selangor, Malaysia.

S. , Adzila and I. , Sopyan and M. , Hamdi (2011) Synthesis of hydroxyapatite through dry mechanochemical method and its conversion to dense bodies: preliminary result. In: Ninth International Conference on Modelling in Medicine and Biology, 26 - 28 July 2011, Riga, Latvia.

S.Naji, Tammam (2011) Asymptotic CFD study of a plenum chamber in swirling fluid bed. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Sadun, Amirul Syafiq and Jalani , Jamaludin and Abdul Sukor, Jumadi and Jamil, Faizal (2016) Force control for a 3-finger adaptive robot gripper by using PID controller. In: 2016 2nd IEEE International Symposium on Robotics and Manufacturing Automation (IEEE 2016), 25-27 September 2016, Universiti Teknologi Petronas, Perak.

Sadun, Amirul Syafiq and Jalani , Jamaludin and Jamil, Faizal (2016) Grasping analysis for a 3-finger adaptive robot gripper. In: 2016 2nd IEEE International Symposium on Robotics and Manufacturing Automation (IEEE 2016), 25-27 September 2016, Universiti Teknologi Petronas, Perak.

Sanudin, Rahmat and Sulong, Muhammad Suhaimi and Morsin, Marlia and Abd Wahab, Mohd Helmy Simulation study on NMOS gate length variation using TCAD Tool. Compilation of Papers - VOLUME 1 .

Sari, Suhaila and Roslan, Hazli (2012) Noise estimation by utilizing mean deviation of smooth region in noisy image. In: 2012 Fourth International Conference on Computational Intelligence, Modelling and Simulation, 25 - 27 September 2012, Kuantan, Pahang.

Sari, Suhaila and Roslan, Hazli (2012) Noise estimation by utilizing mean deviation of smooth region in noisy image. In: 2012 Fourth International Conference on Computational Intelligence, Modelling and Simulation, Kuantan, Pahang.

Senan , Norhalina and Ibrahim, Rosziati and Mohd Nawi, Nazri A study on traditional Malay musical instruments sounds classification system. Proceedings of the 11th International Conference on Information Integration and Web-based Applications & Services .

Seow , Ta Wee (2004) Challenges of scavengers in Malaysia. In: 7th World Congress On Recovery, Recycling And Reintergration With Exhebition, Beijing China.

Seswoya, Roslinda and Mat Daud, Azra Munirah and Md. Ali, Zarina The first attempt of chicken wastewater treatment using sand filtration. In: The first attempt of chicken wastewater treatment using sand filtration.

Shafii, Haryati and Shareh Musa, Sharifah Meryam and Abd Rahman, Zakila Pembangunan modal insan ke arah meningkatkan kualiti hidup masyarakat. In: International Conference on Human Capital Development (ICONHCD 2009), 25-27 Mei 2009, Kuantan, Pahang.

Shamsuddin, Suhadir and Supardan, S. N. and Ibrahim, Abdel-Baset M. A. and Yahya, A. K. (2014) Ultrasonic anomaly near the charge ordering transition in Sr-doped Nd0.3La0.2Ca0.5−x Sr x MnO3 Manganites. Journal of Superconductivity and Novel Magnetism, 27 (5). pp. 1229-1234. ISSN 1557-1939

Shamsudin, Alina and Abdullah, Nor Hazana and Wahab, Eta (2011) Key features of management of technology (MoT) undergraduate program in Malaysia. International Education Studies, 4 (1). pp. 212-216. ISSN 1913-9020

Shamsudin, Shazarel and Chang , Chia Chze and Mohideen Batcha, Mohd Faizal (2008) The influence of EDM parameters when micro-hole drilling of tungsten carbide. In: Engineering Postgraduate Conference (EPC), Bangi, Selangor.

Shiau , Wei Chan and Omar, Siti Sarah and Ramlan, Rohaizan (2016) The relationship between entrepreneurial orientation and manufacturing operations of Malaysian SMEs rural entrepreneurs. Advanced Science Letters, 22 (5/6).

Sivanganam, Lalithambigai (2002) Communication skills: what do employers' expect? (workplace communication skills for engineering graduates). Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Soon, Chin Fhong and Thong, KT and Tee, Kian Sek and AB, Ismail and Morgan, Denyer and MK, Ahmad and Kong, YH and Vyomesh, P and Cheong, SC (2016) A scaffoldless technique for self-generation of three-dimensional keratinospheroids on liquid crystal surfaces. Biotechnic & Histochemistry, 91 (4). pp. 283-295. ISSN 10520295

Sudin, Nor’aisah and Saidin, Mohd Azri and Abd Wahab, Mohd Helmy and Md Som , Mohamad and Kadir, Herdawatie A. and Tukiran, Zarina (2010) Web based controlling system for computer technology laboratory. In: Seminar Kebangsaan Sains Komputer dan Matematik (SKSKM) 2010, 21-22 DISEMBER 2010, Kompleks Pentadbiran Kerajaan Persekutuan Sabah.

Sugiman, Sugiman and Ahmad, Hilton@Mohd Hilton (2016) Comparison of cohesive zone and continuum damage approach in predicting the static failure of adhesively bonded single lap joints. Journal of Adhesion Science and Technology . ISSN 01694243

Sulaiman, Alinah (2012) Kajian pemindahan haba dalam ruang yang menggunakan siling berpenebat fiber sabut kelapa. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Sulaiman, Syazwan Liyana and Harun, Zawati and Ahmad, Sufizar and Taib, Hariati (2013) Synthesis of poly(vinyl alcohol)/chitosan/titanium oxide beads. Jurnal Teknologi, 65 (4). pp. 25-28. ISSN 21803722

Sulong, Nurulsaidatulsyida (2011) Utilization of low hydroxyl content of waste oil polymer foam doped with waste materials for sound absorption application. Masters thesis, Universiti Tun Hussein Onn Malaysia.

T

Tajul Baharuddin, Mohamad Faizal and Othman, Abd Rashid and Yusof, Mohd Fairus and Aman, Mohamad Yusri Assessment on physico-chemical properties for granite residual soil as landfill liner material at Batu Pahat, Johor, Malaysia. In: TISD 2006, Technology and Innovation for Sustainable Development Conference , 25-26 January 2006, Thailand.

Tall, David and Gray, Eddie and Ali, Maselan @ Mazlan and Crowley, Lillie and DeMarois, Phil and McGowen, Mercedes and Pitta, Demetra and Pinto, Marcia and Thomas, Michael and Yusof, Yudariah (2011) Symbols and the bifurcation between procedural and conceptual thinking. Canadian Journal of Science, Mathematics and Technology Education, 1 . pp. 81-104. ISSN 14926156

Tan, Han Mei and Chua , King Lee and Abd Wahab, Mohd Helmy and Mohd Fauadi, Muhammad Hafidz Fazli Web-based content management system for academic purposes. In: Knowledge Management International Conference 2008.

Tan, King Hiyang (2010) Are you triggering? In: World Congress on Teacher Education for TVET in conjunction with World Teachers Day Celebration, 5 - 6 10 2010, Universiti Tun Hussein Onn Malaysia.

Tan, W.C. and Murni, A. and Ghazali, Mohd Imran and Jamian, Saifulnizan Shape memory alloy hybrid composite plate for vibration control. In: International Conference on Composite Materials and Nano Structures (IC2MS'06), 25-29 April 2006, Shah Alam.

Tay , Kim Gaik and Ong , Chee Tiong and Tan , Wooi Nee and Muhammad Basri, Cik Sri Mazzura and Choy , Yaan Yee (2011) Non-linear waves modulation in a stenosed elastic tube. Other thesis, Universiti Tun Hussein Onn Malaysia.

Tee , Kian Sek (2011) A mechatronic system for achieving optimum alignment of lower limb prosthesis. PhD thesis, University of Leeds.

Tomari, Md. Razali and Kobayashia, Yoshinori and Kunoa, Yoshinori (2012) Development of smart wheelchair system for a user with severe motor impairment. In: International Symposium on Robotics and Intelligent Sensors 2012 (IRIS 2012), 4-6 September 2012, Kuching, Sarawak.

Tsutsumi, Takahiko and Takada, Noriharu and Nayan, Nafarizal and Sasaki, Koichi Production and transport of carbon nanoparticles in high-pressure magnetron sputtering plasmas employing a graphite target. Compilation of Papers - VOLUME 1 .

W

W Mohd Ghazali, W Siti Norfatin (2012) Determining the scintillation effect of GPS signal over the WARAS Research Centre UTHM. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Wahab, Eta and Mohammed Quaddus, Mohammed Quaddus and Margaret Nowak, Margaret Nowak Perceived organizational support and organizational commitment: a study of medium enterprises in Malaysia. In: International Conference on Human Capital Development (ICONHCD 2009), 25-27 Mei 2009, Kuantan, Pahang.

Wahid, Noorhaniza (2011) A novel approach to data mining using simplified swarm optimization. PhD thesis, University of Sydney.

Wan Ahmad, Wan Mohd Rashid and Hashim, Jamaluddin and Mohamad, Baharom and Mohamad Nor Saemi, Marzadilahikmah and Ahmad, Azmi (2010) Factor persekitaran kerja dan kebolehan pelatih yang mempengaruhi keberkesanan sistem latihan dual negara (SLDN). In: Persidangan Kebangsaan Pendidikan Kejuruteraan dan Keusahawanan 2010, 25-26 September 2010, Kota Bahru, Kelantan.

Wan Ibrahim , Mohd Haziman (2011) Engineering properties and microstructure of brickwork under aggressive environment. PhD thesis, Universiti Sains Malaysia.

Wan Zaki , Wan Suhaimizan and Wagiran, Rahman and Mohd Noor, Samsul Bahari and Shaari, Abdul Halim Thick film paste preparation and characterization of BaTiO3 for humidity sensor. In: FEIIC Seminar on Engineering and Technology 2006, 4-5 September 2006 , Putrajaya.

Y

Yaakob, Mohd. Yuhazri and Md. Palil, Md. Dan and Mohd. Zain, A. Faizal High impact hybrid composite material for ballistic resistance. In: International Conference on Composite Materials and Nano Structures (IC2MS'06), 25-29 April 2006, Shah Alam.

Yuan, C.S. and Hassan, A. and Ghazali, Mohd Imran and Ismail, A.F. Heat-seal strength analysis of laminated films with LLDPE and LDPE sealant materials in bar sealing application. In: FEIIC Seminar on Engineering and Technology 2006, 4-5 September 2006 , Putrajaya .

Yusairie , Mohd (2010) Electrodeposition and characteristics of highly ordered macroporous β-PbO2 electrodes. Journal of Science and Technology, 3 (1). pp. 1-14. ISSN 2229-8460

Yusoff, Hanaffie and Ahmad, Kamilah (2016) The relationship between liquidity and solvency among firms in consumer sector. In: International Conference on Humanities and Technology (ICOHAT 2016), 17-18 August 2016, Avillion Legacy Melaka Hotel.

Yusop, Siti Hafizah and Misran, Norbahiah and Islam, Mohammad Tariqul and Ismail, Muhammad Yusof Analysis of single square ring reflectarray element for bandwidth enhancement. Compilation of Papers - VOLUME 1 .

Yusop, Siti Hafizah and Misran, Norbahiah and Islam, Mohammad Tariqul and Ismail, Muhammad Yusof Analysis of concentric split ring square reflectarray element for bandwidth enhancement. Compilation of Papers - VOLUME 1 .

Z

Z. , Ahmad and Z. , Ujang and A. A. , Abdul Latiff and N.I. , Ahmat Nor (2008) Effect on membrane fouling and cake resistance in a hybrid membrane bioreactor for palm oil mill effluent treatment. In: International Conference on Environment (ICENV2008), 15-17 Disember 2008, Pulau Pinang.

Z. , Kamdi and P.H., Shipway and K.T. , Voisey and A.J. , Sturgeon (2011) Abrasive wear behaviour of conventional and large-particle tungsten carbide-based cermet coatings as a function of abrasive size and type. Wear, 271 . ISSN 00431648

Zainal, Mohd Shamian and Hamzah, Shipun Anuar and Ubin, Aizan and I Chai, Som Shis Implementation of adiabatic dynamic logic in bit full adder. In: TISD 2006, Technology and Innovation for Sustainable Development Conference , 25-26 January 2006, Thailand.

Zainal Abidin, Mohd Hazreek and Tajul Baharuddin, Mohamad Faizal and Zawawi, Mohd Hafiz and Md Ali, Nor’Aishah and Madun, Aziman and Ahmad Tajudin, Saiful Azhar (2015) Groundwater seepage mapping using electrical resistivity imaging. Applied Mechanics and Materials, 773 . pp. 1524-1534. ISSN 1662-7482

Zulkifli, Shamsul Aizam and Ahmad, Md Zarafi (2011) Comparison study in various controllers in single-phase inverters. In: IEEE Student Conference on Research and Development (SCOReD 2010), 13-14 December 2010, Putrajaya, Malaysia.

Zulkifli, Shamsul Aizam and Ahmad, Md Zarafi and Hamdan, Rohaiza and Bujal , Noor Ropidah Determination of location and number of D-STATCOM at the distribution network. Compilation of Papers 2009 - VOLUME 2 .

This list was generated on Sun Dec 17 23:20:10 2017 MYT.