Items where Subject is "T Technology > T Technology (General)"

Up a level

Library of Congress Subject Areas (2206)
- T Technology (2206)
  - T Technology (General) (2206)
    - T10.5-11.9 Communication of technical information (22)
    - T11.95-12.5 Industrial directories (145)
    - T173.2-174.5 Technological change (24)
    - T175-178 Industrial research. Research and development (38)
    - T201-342 Patents. Trademarks (10)
    - T351-385 Mechanical drawing. Engineering graphics (10)
    - T55.4-60.8 Industrial engineering. Management engineering (52)
    - T61-173 Technical education. Technical schools (64)

Group by: Creators | Item Type

Number of items at this level: 1925.

Bulletin

-, - (2021) Buletin Pusat Kemajuan Kerjaya dan Alumni (PKKA) - Julai 2021. [Bulletin]

-, - (2022) Buletin Department Of Business Management, FPTP - Issue 7, Session 1 2021/2022. [Bulletin]

-, - (2022) Buletin FPTV: BIL. 2/2022 MEI-OGOS 2022. [Bulletin]

-, - (2021) Buletin Fakulti Pendidikan Teknikal dan Vokasional (FPTV) - Bil. 6/2021 (Jun2021). [Bulletin]

-, - (2021) Buletin Jabatan Pengurusan Perniagaan, Fakulti Pengurusan Teknologi dan Perniagaan - Sesi 2 2020/2021. [Bulletin]

-, - (2022) Buletin Pejabat Antarabangsa 1/2022. [Bulletin]

-, - (2021) Buletin Pejabat Hal Ehwal Pelajar - Julai 2021. [Bulletin]

-, - (2022) Buletin Pejabat Kampus Lestari (SCO) Bil 1/2022. [Bulletin] (In Press)

-, - (2022) Buletin Pusat Islam : Edisi Jan-Mac 2022. [Bulletin]

-, - (2021) Buletin Pusat Kemajuan Kerjaya dan Alumni - Jun 2021. [Bulletin]

-, - (2021) Buletin Pusat Kemajuan Kerjaya dan Alumni - Ogos 2021. [Bulletin]

-, - (2021) Buletin Pusat Kemajuan Kerjaya dan Alumni - September 2021. [Bulletin]

-, - (2022) Buletin Pusat Pembelajaran Berterusan Dan Apel - Edisi 1/2022. [Bulletin]

-, - (2022) Buletin Pusat Pengajian Umum dan Kokurikulum Edisi Julai -September 2022. [Bulletin]

-, - (2022) Buletin Pusat Wakaf Dan Endowmen (PWE) Edisi 8/2022. [Bulletin]

-, - (2022) Buletin UTHM 2022. [Bulletin]

-, - (2022) CETUSAN Fakulti Kejuruteraan Awam & Alam Bina Edisi Jul-Dis 2022. [Bulletin]

PTTA, FPTV (2021) Buletin Fakulti Pendidikan Teknikal & Vokasional Mei/2021. [Bulletin] (In Press)

UTHM, FPTV (2021) Buletin Fakulti Pendidikan Teknikal & Vokasional April/2021. [Bulletin] (In Press)

UTHM, FPTV (2021) Buletin Fakulti Pendidikan Teknikal & Vokasional Februari/2021. [Bulletin] (In Press)

UTHM, FPTV (2021) Buletin Fakulti Pendidikan Teknikal & Vokasional Mac/2021. [Bulletin] (In Press)

UTHM, Hal Ehwal Pelajar (2021) Buletin Pejabat Hal Ehwal Pelajar Februari/2021. [Bulletin] (In Press)

UTHM, PKKA (2021) Buletin Pusat Kemajuan Kerjaya & Alumni April/2021. [Bulletin] (In Press)

UTHM, RMC (2021) Buletin Pusat Pengurusan Penyelidikan (RMC) Jan-Mei/2021. [Bulletin] (In Press)

Wan Zahari, Wan Ainaa Mardhiah (2022) Buletin Pusat Pengajian Umum dan Kokurikulum Edisi April-Jun 2022. [Bulletin]

Yaakob, Maizatulazrina and Omar, Mohd Azwadi (2022) Buletin Institut Kejuruteraan Integrasi (I2E) - Jan – March 2022. [Bulletin]

Article

-, - (2023) ENVIRONMENTAL SCIENCES - SCIE. Science Citation Index Expanded (SCIE). pp. 1-9. ISSN 0045-6535

A Hamid, Isredza Rahmi and Subramaniam, Sharmila and Sutoyo, Edi and Abdullah, Zubaile (2018) Classification of polymorphic virus based on integrated features. International Journal on Advanced Science Engineering Information Technology, 8 (6). pp. 2577-2583. ISSN 2088-5334

A Rahman, M N and A Rahman, S A (2019) Feedback survey on usability of enbora method for assessing an exposure to risk factors related to wmsds. Journal of Physics: Conference Series (JPCS), 1150. pp. 1-6. ISSN 1742-6588

A Rahman, M N and Mohamad, S S and Marwah, O M F and Masood, Ibrahim and Hassan, M F and Arifin, A M T and Haq, R H A and Ahmad, S and H, F Haw and Abdullah, Haslina (2019) Inter- and intra- observer reliability of the offera method for assessing exposure risk of computer work-related to wmsds. Journal of Physics: Conference Series (JPCS), 1150. pp. 1-8. ISSN 1742-6588

A. A., Azlim Almey and C., Ahmed Jalal Khan and I., Syed Zahir and K., Mustapha Suleiman and M. R., Aisyah and K., Kamarul Rahim (2010) Total phenolic content and primary antioxidant activity of methanolic and ethanolic extracts of aromatic plants’ leaves. International Food Research Journal, 17. pp. 1077-1084. ISSN 2231-7546

A. B., Mohd Fadzelly and A.Z, Zaleha and M., Hasmadi and M, Lusia Barek (2015) Effect of different drying methods on phytochemicals and antioxidant properties of unfermented and fermented teas from Sabah Snake Grass (Clinacanthus nutans Lind.) leaves. International Food Research Journal, 22 (2). p. 661. ISSN 1985-4668

A. B. A. Mohammed, Abdulrahman and Hasan, Zaimah and A. Borhana Omran, Abdoulhdi and M. Elfaghi, Abdulhafid and Khattak, M.A. and Ilyas, R. A. and Sapuan, S. M. (2023) Effect of Various Plasticizers in Different Concentrations on Physical, Thermal, Mechanical, and Structural Properties of Wheat Starch-Based Films. Polymers, 15 (63). pp. 1-21.

A. B. A. Mohammed, Abdulrahman and Hasan, Zaimah and Borhana Omran, Abdoulhdi A. and M. Elfaghi, Abdulhafid and Khattak, M.A. and Ilyas, R. A. and Sapuan, S. M. Effect of Various Plasticizers in Different Concentrations on Physical, Thermal, Mechanical, and Structural Properties of Wheat Starch-Based Films. Polymers, 15 (63). pp. 1-21.

A. F. Yahaya, Jabbar and Mansor, Muhamad (2017) Switching speed improvements in multiphase buck converter via two-shunt voltage-sources. Journal of Applied Environmental and Biological Sciences, 7 (6S). pp. 1-6. ISSN 2090-4274

A. H., Juliana and M. T., Paridah and S., Rahim and I., Nor Azowa and U. M. K., Anwar (2011) Properties of particleboard made from kenaf (Hibiscus cannabinus L.) as function of particle geometry. Materials and Design, 34. pp. 406-411. ISSN 0261-3069

A. H., Juliana and M. T., Paridah and S., Rahim and I., Nor Azowa and U.M.K., Anwar (2011) Properties of particleboard made from kenaf (Hibiscus cannabinus L.) as function of particle geometry. Materials and Design, 34. pp. 406-411. ISSN 0261-3069

A. H., Juliana and M. T., Paridah and U. M. K., nwar (2012) Properties of three-layer particleboards made from kenaf (Hibiscus cannabinus L.) and rubberwood (Hevea brasiliensis). Materials and Design, 40. pp. 59-63. ISSN 0261-3069

A. Kadir, Aeslina and Mohajerani, Abbas (2011) Recycling cigarette butts in lightweight fired clay bricks. Construction Materials, 164. pp. 219-229.

A. Khalid, Nur Hafizah and Ismail, Mohammad and Mohd. Sam, Abd Rahman and Mohamed, Azman and A. Ismail, Mohamed and Jamellodin, Zalipah and Salleh, Norhafizah and A. Hamid, Noor Azlina and A. Majid, Masni (2018) Physico-mechanical properties of polymer concrete containing micro-filler of palm oil fuel ash. Advanced Science Letters, 24 (6). pp. 3974-3977. ISSN 1936-6612

A. M., Aleesa and Zaidan, B. B. and Zaidan, A. A. and M. Sahar, Nan (2020) Review of intrusion detection systems based on deep learning techniques: coherent taxonomy, challenges, motivations, recommendations, substantial analysis and future directions. Neural Computing and Applications, 32. pp. 9827-9858. ISSN 0941-0643

A. Mansour, Mohammed and Ismail, Mohd Hanif and Imran Latif, Qadir Bux alias and Alshalif, Abdullah Faisal and Milad, Abdalrhman and Al Bargi, Walid Abdullah (2023) A Systematic Review of the Concrete Durability Incorporating Recycled Glass. Sustainability, 15 (3568). pp. 1-33.

A. Mansour, Mohammed and Ismail, Mohd Hanif and Imran Latif, Qadir Bux alias I and Faisal Alshalif, Abdullah and Milad, Abdalrhman and Al Bargi, Walid Abdullah (2023) A Systematic Review of the Concrete Durability Incorporating Recycled Glass. Sustainability, 15 (4). pp. 1-33.

A. Mansour, Mohammed and Ismail, Mohd Hanif and Qadir Bux alias Imran Latif 2, Qadir Bux alias Imran Latif 2 and Alshalif, Abdullah Faisal and Milad, Abdalrhman and Al Barg, Walid Abdullah (2023) A Systematic Review of the Concrete Durability Incorporating Recycled Glass. Sustainability, 15 (3568). pp. 1-33.

A. Memon, Abid and Memon, M. Asif and Bhatti, Kaleemullah and Jacob, Kavikumar and Sitthiwirattham, Thanin and Promsakon, Chanon and Khan, Ilyas (2022) Modelling and simulation of fluid flow through a circular cylinder with high reynolds number: a COMSOL multiphysics study. Journal of Mathematics and Statistics, 2022. pp. 1-9. (Unpublished)

A. Mostafa, Salama and Mustapha, Aida and Hazeem, Ahmed Abdulbasit and Hamad Khaleefah, Shihab and Abed Mohammed, Mazin (2018) An agent-based inference engine for efficient and reliable automated car failure diagnosis assistance. IEEE Access, 6. 8322 -8331. ISSN 2169-3536

A. Mostafa, Salama and Mustapha, Aida and Mohammed, Mazin Abed and Ahmad, Mohd Sharifuddin and A. Mahmoud, Moamin (2018) A fuzzy logic control in adjustable autonomy of a multi-agent system for an automated elderly movement monitoring application. International Journal of Medical Informatics, 112. pp. 173-184. ISSN 1386-5056

A. Mukred, Jameel A. and A. Rahim, Ruzairi and Mohamad, Elmy Johana and Salh, Adeeb and Ashyap, Adel Y. I. and Abdullah, Qazwan and AL-Fadhali, Najib and Al-Ameri, S. and Al-Ashwal, Rania (2022) Vector evaluated particle swarm optimization approach to solve assembly sequence planning problem. Journal of Tomography System & Sensors Application, 5 (1). pp. 1-9. ISSN 2636-9133

A. Rahim, Erween and Sasahara, Hiroyuki (2011) An analysis of surface integrity when drilling inconel 718 using palm oil and synthetic ester under, MQL condition. Machining Science and Technology: An International Journal, 15 (1). pp. 76-90. ISSN 1091-0344

A. Rahman, K. A. and B. S. K. K., Ibrahim and A. Jamil, M. M. and Leman, A. M. (2012) The development of control system via Brain Computer Interface (BCI) - Functional Electrical Stimulation (FES) for paraplegic subject. International Journal of Integrated Engineering, 4 (3). pp. 59-64.

A. Rahman, M. A. and A. Akasah, Z. and F. Zuraidi, S.N. (2011) Analisis tren semasa demografi personel penyenggaraan bangunan warisan di Malaysia. Journal of Surveying, Construction and Property, 2. pp. 29-37.

A. Talip, Balkis and Neo, Zhi Zing and Hairuddin, Nur Diyana and Radin Mohamed, Radin Maya Saphira and Muhammad, Norhayati and Basri, Hatijah and Abdullah, Norazlin and Mohamad Kahar, Ernna Erynna and Al-Gheethi, Adel Ali Saeed and Abdullah, Shakila (2019) Determination of physicochemical properties of formulated fish feed supplemented with microalgae from bioremediation process. Jurnal Teknologi, 81 (3). pp. 151-157. ISSN 2180–3722

A.A.Gurman, Muhammad Taimoor and Abdul Latiff, Azmi and Ahmed Abbasi, Ishfaque and Ali Jato, Zahid and Shahid, Choudhry (2023) Examining Vocabulary Usage Ratios of CEFR Vocabulary and AWL vocabulary in Comparison to CEFR Proficiency Levels among Pakistani EFL Writers and Offering Instructional Recommendations for Vocabulary Items. Central European Management Journa, 13 (1). pp. 266-274. ISSN 2336-2693

A.B.A. Mohammed, Abdulrahman A and Hasan, Zaimah and Borhana Omran, Abdoulhdi A. and Elfaghi, Abdulhafid M. and Ali, Yasir Hassan and A.A. Akeel, Norie and Ilyas, R.A. and Sapuan, S.M. (2023) Effect of sugar palm fibers on the properties of blended wheat starch/polyvinyl alcohol (PVA) -based biocomposite films. Jmr&t, 24. pp. 1043-1055.

A.M.S. Nurhaziqah, A.M.S. Nurhaziqah and M.K. Ahmad, M.K. Ahmad and A.B. Faridah, A.B. Faridah and D.G. Saputri, D.G. Saputri and S.A. Ramli, S.A. Ramli and M.H. Mamat, M.H. Mamat and M. Shimomura, M. Shimomura (2023) Optimization of polymer blend electrolytes with tuneable conductivity potentials. Materials Letters. pp. 1-4.

ABDULKARIM ALHANDI, SOMYA and KAMALUDIN, HAZALILA and ABDULWAHAB MOHAMMED ALDUAIS, NAYEF (2023) Trust Evaluation Model in IoT Environment: A Comprehensive Survey. survey, 11. pp. 11165-11182.

ABDULKARIM ALHANDI, SOMYA and KAMALUDIN, HAZALILA and MOHAMMED ALDUAIS, NAYEF ABDULWAHAB (2023) Trust Evaluation Model in IoT Environment: A Comprehensive Survey. Survey, 11. pp. 1-18.

ABDULKARIM ALHANDI, SOMYA and KAMALUDIN, HAZALILA and MOHAMMED ALDUAIS, NAYEF ABDULWAHAB (2023) Trust Evaluation Model in IoT Environment: A Comprehensive Survey. Digital Object Identifier, 11. pp. 11165-11182.

ABDULLAH, H. and LAW BOON HUI, C. and ZAKARIA, M. S. (2023) MINIMIZATION OF MACHINING PROCESS SEQUENCE BASED ON ANT COLONY ALGORITHM AND CONVENTIONAL METHOD. Journal of Engineering Science and Technology, 18 (2). pp. 949-962.

ADEB SALH, ADEB SALH and RAZALI NGAH, RAZALI NGAH and LUKMAN AUDAH, LUKMAN AUDAH and KWANG SOON KIM, KWANG SOON KIM and QAZWAN ABDULLAH, QAZWAN ABDULLAH and YAHYA M. AL-MOLIKI, YAHYA M. AL-MOLIKI and KHALED A. ALJALOUD, KHALED A. ALJALOUD and HAIRUL NIZAM TALIB, HAIRUL NIZAM TALIB (2023) Energy-Efficient Federated Learning With Resource Allocation for Green IoT Edge Intelligence in B5G. Digital Object Identifier, 11.

ALI, MUAZAM and OMAR, SITI SARAH and GHUFFAR, SADAF and AHMAD, IDAYUWATI and HAMAWANDY, NAWZAD MAJEED A STUDY OF FACTORS AFFECTING ENTREPRENEURIAL INTENTION: THE MODERATING ROLE OF INDIVIDUALISM. Journal of Tianjin University Science and Technology, 56 (3). pp. 176-192. ISSN 0493-2137

ALI, MUAZAM and OMAR, SITI SARAH and GHUFFAR, SADAF and AHMAD, IDAYUWATI and HAMAWANDY, NAWZAD MAJEED (2023) A STUDY OF FACTORS AFFECTING ENTREPRENEURIAL INTENTION: THE MODERATING ROLE OF INDIVIDUALISM. Journal of Tianjin University Science and Technology, 56. pp. 176-192. ISSN 0493-2137

Ab Aziz, Nur Azrie Hizad and Md Ali, Umi Fazara and Ahmad, Anis Atikah and Mohamed Dzahir, Mohd Irfan Hatim and Khamidun, Mohd Hairul and Abdullah, Muhammad Faiq (2023) Non-functionalized oil palm waste-derived reduced graphene oxide for methylene blue removal: Isotherm, kinetics, thermodynamics, and mass transfer mechanism. Arabian Journal of Chemistry, 16 (1). pp. 1-11.

Ab Aziz, Nur Azrie Hizad and Md Ali, Umi Fazara and Mohamed Dzahir, Mohd Irfan Hatim and Khamidun, Mohd Hairul and Abdullah, Muhammad Faiq (2023) Non-functionalized oil palm waste-derived reduced graphene oxide for methylene blue removal: sotherm, kinetics, thermodynamics, and mass transfer mechanism. Arabian Journal of Chemistry, 16. pp. 1-11.

Ab Kadir, Muhammad Irfan and Mustapa, Mohammad Sukri and Rosli, Nurul Liyana and Yahya, Mohd Shahir and Mohamad, Mahmod Abd Hakim and Abd Rahim, Abd Khalil (2018) The effect of microstructures and hardness characteristics of recycling aluminium chip aa6061/al powder on various sintering temperatures. International Journal of Integrated Engineering, 10 (3). pp. 53-56. ISSN 2600-7916

Ab Rahman, Azmanirah and Muhamad Hanafi, Nurfirdawati and Yusof, Yusmarwati and Mukthar, Marina Ibrahim and Awang, Halizah and Mohamed Yusof, Anizam (2020) The effect of rubric on rater’s severity and bias in TVET laboratory practice assessment: analysis using many-facet rasch measurement. Journal of Technical Education and Training, 12 (1). pp. 57-67. ISSN 2229-8932

Abang Zaidel, Dayang Norulfairuz and Md Rashid, Jamaeyah and Hamidon, Nurul Hazirah and Md. Salleh, Liza and Mohd Kassim, Angzzas Sari (2017) Extraction and characterisation of pectin from dragon fruit (hylocereus polyrhizus) peels. Chemical engineering Transactions, 56. pp. 805-810. ISSN 2283-9216

Abas, Nor Haslinda and Adman, Nurjeha and Deraman, Rafikullah (2017) Development of occupational safety and health requirement management system (OSHREMS) software using adobe dreamweaver CS5 for building construction project. MATEC Web of Conferences, 103. pp. 1-8. ISSN 2261-236X

Abas, Nor Haslinda and Mohd Ta’at, Nurul Hasanah and Hasmori, Muhammad Fikri and Abdullah, Abd.Halid and Nagapan, Sasitharan and Deraman, Rafikullah and Yean, Ghing Tong and Hardono, Setiawan (2018) Noise assessment at construction site which uses IBS formwork system. Asian Journal of Technical Vocational Education And Training (AJTVET), 4. pp. 33-41. ISSN 0128-0600

Abas, Nor Haslinda and Yap, Wai Heong and Mohammad, Hairuddin and Yaman, Siti Khalijah and Rahmat, Muhamad Hanafi (2020) The analysis of struck-by accidents at construction sites in Johor. The International Journal of Integrated Engineering, 12 (4). pp. 266-275. ISSN 2229-838X

Abd Aziz, Azlihan and Masek, Alias and Mohamad, Norsuhaidah (2022) Students’ participation and motivational factors in student-centered learning: a case of two Malaysian Vocational Institutes. Journal of Engineering Education Transformations, 35. pp. 204-210.

Abd Aziz, Sahrir and Kassim, Rozilah and Mohd Masirin, Mohd Idrus (2018) Railway development and the impact to Malaysian economy. Journal of Advanced Research in Dynamical and Control Systems, 10 (6). pp. 272-280. ISSN 1943-023X

Abd Halim, Suhaila and H. P. Manurung, Yupiter and Raziq, Muhamad Aiman and ChengYee Low, ChengYee Low and Rohmad, Muhammad Saufy and John R. C. Dizon6 & Vladimir S. Kachinskyi, John R. C. Dizon6 & Vladimir S. Kachinskyi (2023) Quality prediction and classifcation of resistance spot weld using artifcial neural networkbwith open‑sourced, self‑executable andGUI‑based application tool Q‑Check. Scientifc Reports. pp. 1-16.

Abd Hamid, Ruhiana Idayu and Tee, Tze Kiong and Abbas @ Ahmad, Lutfiah Natrah and Mohd. Rusly, Noor Syuhaili and Ahmad Puad, Farah Najwa (2022) Enhancing grammar competence of vocational school students through the omygram learning chart. Studies in English Language and Education, 9 (2). pp. 685-704. ISSN 2355-2794

Abd Latif, Amirah and Awang, Noor Azura and Zakaria, Zahariah and Zazali, N. A. and Mustapa, M. A. and Muhammad, F. D. and Muhammad, F. D. and Abu Bakar, M. H. (2017) Passively mode-locked fiber laser by utilizing TTG film on a D-shaped fiber as a saturable absorber. Journal of Science and Technology, 9 (2). pp. 29-33. ISSN 2229-8460

Abd Rahim, Erween and Dorairaju, Hemarani (2018) Evaluation of mist flow characteristic and performance in Minimum Quantity Lubrication (MQL) machining. Measurement, 123. pp. 213-225. ISSN 0263-2241

Abd Rahim, Erween and Jaafar, Mohd Noor and Mohid, Zazuli and Ibrahim, Mohd Rasidi and Ahmad, Said (2018) A study on cryogenic supercritical carbon dioxide coolant delivery technique when machining of AISI 1045 steel. Journal of Mechanical Engineering, 5 (3). pp. 37-49. ISSN 1823- 5514

Abd Rahim, Erween and Sasahara, Hiroyuki (2017) Three dimensional finite element modeling, when drilling of Ti-6Al-4V. International Journal of Robotics and Mechatronics, 4 (1). pp. 34-38. ISSN 2288-5889

Abd Rahman, Misbahul Muneer and Kaamin, Masiri and Mohamad, Mahmod Abd Hakim and Mohmad Omar, Mohamad Hanif and Mohamed Nor, Mohd Hadri and Abd Aziz, Azizul Rahman (2014) Rekabentuk model sistem guna semula air wudhuk. Journal of Techno Social, 5 (1). pp. 33-57. ISSN 2229-8940

Abd Rahman, Muhammad Faqhrurrazi and Asmuin, Nor Zelawati and Taib, Ishkrizat and Nazar, Juwaidi and Ismail, Azizan and Khairulfuaad, Riyadhthusollehan (2020) Investigate flow characteristics of Metered-Dose Inhaler (MDI) Disposable Inhaler Spacer (AeroCup) for COVID-19 patient by using Computational Fluid Dynamic (CFD). CFD Letters, 12. pp. 63-74. ISSN 2180-1363

Abd Rahman, Norashidah and Khairuddin, Siti Amirah Azra and Jamaluddin, Norwati and Mohd Jaini, Zainorizuan (2018) Strength of reinforced fibrous foamed concrete-filled hollow section. 0255-5476, 936. pp. 219-223. ISSN 0255-5476

Abd Rahman, Raha and Abdul Khair, Muhammad Aizat and Wei May, Lim and Mohd Masirin, Mohd Idrus and Hassan, Mohd Farid (2020) The evaluation of accident data by using existing predictive model for Johor and Selangor state. International Journal of Advance Science and Technology, 29 (10S). pp. 647-656. ISSN 2005-4238

Abd Rahman, Raha and Meor Hussein, M M H and Mohd Saim, Nur Amylia Izrin and Megat Tajuddin, Megat Zuhairy (2023) Analysis of Road Traffic Crashes Data of Perak State in Malaysia. INTERNATIONAL JOURNAL OF SUSTAINABLE CONSTRUCTION ENGINEERING AND TECHNOLOGY, 14 (2). pp. 266-276. ISSN 2180-3242

Abd Razak, Nur Syazanna Iryani and Balasbaneh, Ali Tighnavard (2022) Perception of green roof and flat roof development in high rise buildings in Malaysia: pros and cons. Recent Trends in Civil Engineering and Built Environment, 3 (1). 023-032.

Abd Wahabl, Norhayati and Adnanl, Suraya Hani and Ibrahim, Abdul Hadi Izaan and Mohamad, Mazizah Ezdiani and Osman, Mohamad Hairi and Jamellodin, Zalipah and Abdul Hamid, Noor Azlina (2023) A STUDY ON THE EFFECT OF CURING PERIOD ON THE STRENGTH OF CEMENT BRICK USING SAGO FINE WASTE AS CEMENT REPLACEMENT. Malaysian Construction Research Journal, 39 (1). pp. 41-49.

Abd. Wahab, Izudinshah and Ismail, Lokman Hakim and Abdullah, Abd Halid and Rahmat, Muhamad Hanafi and Abd Salam, Nur Nasuha (2018) Natural ventilation design attributes application effect on, indoor natural ventilation performance of a double storey, single unit residential building. International Journal of Integrated Engineering, 10 (2). pp. 7-12. ISSN 2229-838X

Abdalhadi, Abdualrhman and Wahid, Herman and Burhanuddin, Dirman Hanafi (2022) An optimal proportional integral derivative tuning for a magnetic levitation system using metamodeling approach. Indonesian Journal of Electrical Engineering and Computer Science, 25 (3). pp. 1356-1366. ISSN 2502-4752

Abdo Alkhadhera, Sadeq Abdullah and Zakaria, Mohamad Pauzi and Suratman, Suhaimi and Y. A. Alanazid, Tahani and A. H. Al-Bagawi, A. H. Al-Bagawi and M. Magam, Sami and Masood, Najat and Abdul Kadir, Aeslina and Al-Gheethi, Adel (2023) Assessment of Sewage Molecular Markers in Port Dickson Coast and Kim Kim River with Sediment Linear Alkylbenzenes. POLYCYCLIC AROMATIC COMPOUNDS. pp. 1-14.

Abdol Rahman, Mohd Nasrull and Ahmad Zuhaidi, Muhammad Fareez (2018) Exposure level of ergonomic risk factors in grocery retail industries. Journal of Engineering and Applied Sciences, 13 (8). pp. 6354-6358. ISSN 1816-949X

Abduh Algheethi, Adel Ali Saeed and Noman, Efaq and Radin Mohamed, Radin Maya Saphira and Abdel-Monem, Mohamed Osman and Mohd Kassim, Amir Hashim (2018) Potential of staphylococcus xylosus strain for recovering nickel ions from aqueous solutions. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 42 (1). pp. 31-37. ISSN 2289-7879

Abdul Bakil, Siti Natrah and Kamal, Hazirah and Abdullah, ‪Hasan Zuhudi and Idris, ‪Maizlinda Izwana (2020) Sodium alginate-zinc oxide nanocomposite film for antibacterial wound healing applications. Biointerface Research in Applied Chemistry, 10 (5). pp. 6245-6252. ISSN 2069-5837

Abdul Ghaffar, Idris and Haji Mohd, Mohd Norzali (2017) Presentation attack detection for face recognition on smartphones: a comprehensive review. Journal of Telecommunication, Electronic and Computer Engineering, 9 (3-8). pp. 33-38. ISSN 2180-1843

Abdul Hadi, Fatin Shaqira and Zakaria, Zahariah and Awang, Noor Azura and Azmi, Atiqah Nabieha (2017) The generation of dual wavelength pulse fiber laser using fiber bragg grating. Journal of Science and Technology, 9 (3). pp. 92-95. ISSN 2229-8460

Abdul Hamid, Abdul Rahim and Mohd Khazid, Nur Inayah and Yunus, Riduan and A Halim, Hazruwani and Abdul Razak, Amall Raihan (2018) The emerging of employment gap in the Malaysian construction industry. Journal of Physics: Conference Series, 1049. pp. 1-8. ISSN 1742-6588

Abdul Hamid, Nor Aziati and Salim, Juhana (2012) Developing a conceptual framework of knowledge transfer in Malaysia E-Government IT outsourcing: an integration with transactive memory system. Journal of Information Retrieval and Knowledge Management, 2. pp. 40-59.

Abdul Hamid, Norhamreeza and Mohd Nawi, Nazri and Ghazali, Rozaida and Mohd Salleh, Mohd Najib (2011) Accelerating learning performance of back propagation algorithm by using adaptive gain together with adaptive momentum and adaptive learning rate on classification problems. International Journal of Software Engineering and its Applications, 5 (4). pp. 31-44.

Abdul Hassan, Norhidayah and Ruzi, Nur Azni and Mohd Shukry, Nurul Athma and Putra Jaya, Ramadhansyah and Hainin, Mohd Rosli and Mohd Kamaruddin, Nurul Hidayah and Abdullah, Mohd Ezree (2019) Physical properties of bitumen containing diatomite and waste engine oil. Malaysian Journal of Fundamental and Applied Sciences, 15 (4). pp. 528-531. ISSN 2289-5981

Abdul Kadir, Aeslina and Abbas, Mohajerani (2015) Effect of heating rate on gas emissions and properties of ﬁred clay bricks and ﬁred clay bricks incorporated with cigarette butts. Applied Clay Science, 104. pp. 269-276. ISSN 1691317

Abdul Kadir, Aeslina and Abdul Salim, Nurul Salhana and Abdullah, Mohd Mustafa Al Bakri and Mohd Nawi, Mohd Nasrun and Sandu, Andrei Victor (2018) Properties impact from wastewater treatment sludge utilized into fired clay bricks. Malaysian Construction Research Journal (MCRJ) Special Issue, 2 (2). pp. 130-142. ISSN 1985 - 3807

Abdul Kadir, Aeslina and Abdullah, Alida and Lee, Kah Wai (2012) Study on Ferum (Fe) and Zinc (Zn) removal by using rice bran at Sungai Pelepah, Kota Tinggi, Johor. Advances in Environmental Biolow -", 7 (12). pp. 3580-3586.

Abdul Kadir, Aeslina and Hinta, Hermawati and Sarani, Noor Amira (2015) The utilization of coffee waste into fired clay brick. ARPN Journal of Engineering and Applied Sciences, 10 (15). pp. 6289-6292. ISSN 1819-6608

Abdul Kadir, Aeslina and Mohd Zahari, Nur Azian and Mardi, Noor Azizi (2012) Utilization of palm oil waste into fired clay brick. Advances in Environmental Biology, 7 (12). pp. 3826-3834. ISSN 1995-0756

Abdul Kadir, Aeslina and Puade, Azi Zatika (2012) The utilisation of Activated Carbon (AC) from palm shell waste to treat textile wastewater. Advances in Environmental Biology, 7 (12). pp. 3621-3627. ISSN 1995-0756

Abdul Kadir, Aeslina and Yahya, Zarina and Hussin, Kamarudin and Liew, Yun Ming and Abdullah, Mohd Mustafa Al Bakri and Deraman, Laila Mardiah (2015) Utilization of bottom ash for alkali-activated (SI-AL) materials: a review. ARPN Journal of Engineering and Applied Sciences, 10 (18). pp. 8351-8357. ISSN 1819-6608

Abdul Kadir, Masidayu and Mokhatar, Shahrul Niza and Abd Mutalib, Nur Anis Najwa (2022) Energy absorption of modified rubberized concrete block under low velocity impact loads. Recent Trends in Civil Engineering and Built Environment, 3 (1). pp. 420-426.

Abdul Khaliq, Nor Aizatul Nabila and Ramli, Muhammad Faiz (2022) Obstacle detection for Unmanned Aerial Vehicle (UAV). PROGRESS IN AEROSPACE AND AVIATION TECHNOLOGY, 2 (1). pp. 53-64.

Abdul Latif, Noradila and Auspan, Afiffikri and Mustapa, Mohammad Sukri and Mohd Joharudin, Nurul Farahin and Nasir, Nurul Fitriah (2019) Effect of loading rates and single edge notch bending (SENB) specimen thicknesses on shear lips formation for Al6061 alloy. Malaysian Journal of Microscopy, 15. pp. 38-45. ISSN 1823-7010

Abdul Rahim, Herlina and Zulkifli, Syahidah Nurani and Mohd Subha, Nurul Adilla and Abdul Rahim, Ruzairi and Zainal Abidin, Hafilah (2017) Water quality monitoring using wireless sensor network and smartphone-based applications: a review. Sensors & Transducers, 209 (2). pp. 1-11. ISSN 2306-8515

Abdul Rahim, Nur Fazira and Muhammad, Norhayati and Abdullah, Norazlin and A. Talip, Balkis and Dusuki, Nur Jihan Shahirah (2018) Synergistic effect of polyherbal formulations on DPPH radical scavenging activity. Journal of Science and Technology, 10 (2). pp. 116-121. ISSN 2600-7924

Abdul Rahman, Nurul Farhana and Abd.Rahman, Hamimah and Azmi, Mohd Azham (2021) Perovskite-type oxide-based dual composite cathode for solid oxide fuel cells: a short review. Solid State Phenomena, 317. pp. 417-425. ISSN 1662-9779

Abdul Rahman, Nurul Farhana and Abd.Rahman, Hamimah and Wan Azhan, Wan Muhammad Syahmi and Yatim, Nor Hamidah (2021) Linear shrinkage, strength and porosity of alumina-based ceramic foam with corn starch as pore former. Solid State Phenomena, 317. pp. 75-80. ISSN 1662-9779

Abdul Rahman, Syahrul Aziana and Abdol Rahman, Mohd Nasrull (2018) A systematic review for computer based observational techniques for assessing exposure to risk factors for work-related musculoskeletal disorders. International Journal of Engineering & Technology, 7 (3.2). pp. 60-65. ISSN 2227-524X

Abdul Razak, Muhammad Thariq and Chuah, Chai Wen (2017) Staff attendance system using RFID. International Journal on Informatics Visualization, 1 (4-2). pp. 250-255. ISSN 2549-9610

Abdul Salim, Nur Atikah and Fulazzaky, Mohamad Ali and Puteh, Mohd Hafz and Khamidun, Mohd Hairul and Mohd Yusof ·, Abdull Rahim and Abdullah, Noorul Hudai and Fulazzaky, Mohammad and Zaini, Muhammad Abbas Ahmad (2022) Mass transfer kinetics and mechanisms of phosphate adsorbed on waste mussel shell. Water Air Soil Pollution. pp. 1-22. ISSN 1573-2932

Abdul Samad, M. S. and Mohd Nor, M. K. (2022) A comparative analysis between a newly Malaysian size ATD and the current Hybrid III ATD in frontal impact. BIOMEDICAL ENGINEERING. pp. 1-13.

Abdul Samad, M. S. and Mohd Nor, M. K. and Abdul Majid, M. M. and Abu Kassim, K. K. (2023) Optimization of vehicle pulse index parameters based on validated vehicle-occupant finite element model. INTERNATIONAL JOURNAL OF CRASHWORTHINESS. pp. 1-8.

Abdul Samad, M. S. and Mohd Nor, M. K. and Abdul Majid, M. M. and Abu Kassim, K. K. (2023) Optimization of vehicle pulse index parameters based on validated vehicleoccupant finite element mode. INTERNATIONAL JOURNAL OF CRASHWORTHINESS. pp. 1-8.

Abdul Sani, Amiril Sahab and Abd Rahim, Erween and Samion, Syahrullail (2017) Tribological performance of modified jatropha oil containing oil-miscible ionic liquid, for machining applications. Journal of Mechanical Science and Technology, 31 (12). pp. 5675-5685. ISSN 1738-494X

Abdul Sani, Amiril Sahab and Zamri, Zubaidah and Megat Ahmad Radzi, Puteri Humairah and Sabri, Ainaa Mardhiah (2023) Modified Tamanu Plant-Based Oil From Pahang Malaysia as Biodegradable Metalworking Fluids. Materials Today: Proceedings, 75 (1). pp. 39-45. ISSN 2214-7853

Abdul Sani, Amiril Sahab and Zamri, Zubaidah and Megat Ahmad Radzi, Puteri Humairah and Sabri, Ainaa Mardhiah and Talib, Norfazillah (2023) Modified Tamanu Plant-Based Oil From Pahang Malaysia as Biodegradable Metalworking Fluids. Materials Today: Proceedings. pp. 1-7.

Abdul Shaib, M. Fadzli and Abdul Rahim, Ruzairi and M. Muji, Siti Zarina and Leow, Pei Ling and Abdul Jamil, M. Mahadi (2012) A study on optical sensors orientation for tomography system development. Sensors & Transducers Journal, 140 (5). pp. 45-52. ISSN 1726-5479

Abdul Wahab, Hanani and M. Rus, Anika Zafiah and Abdullah, M. F. L. and Abdullah, Nur Munirah (2019) Sound absorption coefficient and water content responses in acoustic analysis based on renewable polyurethane foam composites. International Journal of Innovative Technology and Exploring Engineering (IJITEE), 8 (9S3). pp. 1576-1581. ISSN 2278-3075

Abdul-Kahar, Rosmila and Kandasamy, R. and Muhaimin, Muhaimin (2011) Scaling group transformation for boundary-layer flow of a nanofluid past a porous vertical stretching surface in the presence of chemical reaction with heat radiation. Computers & Fluids, 52. pp. 15-24.

Abdulhameed, Mohammed Abdulmunem and Dzarfan Othman, Mohd Hafiz and Ismail, Ahmad Fauzi and Matsuura, Takeshi and A Rahman, Mukhlis and Harun, Zawati and Puteh, Mohd Hafiz and Jaafar, Juhana (2017) Preparation and characterisation of inexpensive porous kaolin hollow fibre as ceramic membrane supports for gas separation application. Journal of the Australian Ceramic Society, 53. pp. 645-655. ISSN 2510-1560

Abdulhameed, Mohammed Abdulmunem and Othman, Mohd Hafiz Dzarfan and Al Joda, Haider Nadhom Azziz and Ismail, Ahmad Fauzi and Matsuura, Takeshi and Harun, Zawati and A. Rahman, Mukhlis and Puteh, Mohd Hafiz and Jaafar, Juhana (2017) Fabrication and characterization of affordable hydrophobic ceramic hollow fibre membrane for contacting processes. Journal of Advanced Ceramics, 6 (4). pp. 330-340. ISSN 2226-4108

Abdulhameed, Mohammed Abdulmunem and Othman, Mohd Hafiz Dzarfan and Ismail, Ahmad Fauzi and Matsuura, Takeshi and Harun, Zawati and A. Rahman, Mukhlis and Puteh, Mohd Hafiz and Jaafar, Juhana and Rezaei, Masoud and Hubadillah, Siti Khadijah (2018) Carbon dioxide capture using a superhydrophobic ceramic hollow fibre membrane for gas-liquid contacting process. Journal of Cleaner Production, 140 (3). pp. 1731-1738. ISSN 0959-6526

Abdulkareem, Ali Nasr and Nasir, Nurul Fitriah (2022) Biodiesel production from canola oil using TiO2CaO as a heterogenous catalyst. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 93 (2). pp. 125-137. ISSN 2811-3950

Abdullah, Abd Halid and Abu Bakar, Siti Khatijah and Abd Rahman, Ismail (2013) Simulation of office’s operative temperature using ECOTECT model. International Journal of Construction Technology and Management, 1 (1). pp. 33-37.

Abdullah, Abd Halid and Abu Bakar, Siti Khatijah and Abdul Rahman*, Ismail (2013) Indoor thermal performance of an office building using Conventional Brick Versus Interlocking Compressed Earth Brick (ICEB) wall. International Journal of Construction Technology and Management, 1 (1). pp. 22-27.

Abdullah, Abd Halid and Fan Wang, Fan Wang (2012) Design and low energy ventilation solutions for atria in the tropics. Sustainable Cities and Society, 2. pp. 8-28.

Abdullah, Abd Halid and Yaman, Siti Khalijah and Mohammad, Hairuddin and Hassan, Padzil Fadzil (2018) Construction manager’s technical competencies in Malaysian construction projects. Engineering, Construction and Architectural Management, 25 (2). pp. 153-177. ISSN 0969-9988

Abdullah, Abu Hannifa and Ismai, Zulhelmi and W. Idris, Wan Farhana and Ahmad Khusairi, Zulsyazwan and Mohd Zuhan, Mohd Khairul Nizam (2023) Combination of cellulose tissue paper and bleach-treated graphene in stiffness reinforcement of polyvinyl alcohol film. Diamond & Related Materials, 132. pp. 1-9.

Abdullah, Abu Hannifa and Ismail, Zulhelmi and W. Idris, Wan Farhana and Ahmad Khusairi, Zulsyazwan and Mohd Zuhan, Mohd Khairul Nizam (2023) Combination of cellulose tissue paper and bleach-treated graphene in stiffness reinforcement of polyvinyl alcohol film. Diamond & Related Materials, 132. pp. 1-9.

Abdullah, Aslam (2020) Condition for non-oscillatory solution for scalar convection-dominated equation. CFD Letters, 12 (4). pp. 24-34. ISSN 2180-1363

Abdullah, Aslam (2023) Effect of Graded Mesh Number on the Solution of Convection-Diffusion Flow Problem with Quadratic Source. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 103 (1). pp. 1-13. ISSN 2289-7879

Abdullah, Aslam (2018) Mathematical relationship between grid and low peclet numbers for the solution of convection-diffusion equation. ARPN Journal of Engineering and Applied Sciences, 13 (9). pp. 3182-3187. ISSN 1819-6608

Abdullah, Aslam (2018) Obtaining grid number for the shooting method solution of convection-diffusion equation. International Journal of Mechanical Engineering and Technology (IJMET), 9 (5). pp. 916-924. ISSN 0976-6359

Abdullah, Haslina and Ramli, Rizauddin and Abd Wahab, Dzuraidah and Abu Qudeiri, Jaber (2016) Minimizing machining airtime motion with an ant colony algorithm. The International Journal of Advanced Manufacturing Technology, 10 (1). pp. 161-165. ISSN 1881-803X

Abdullah, Haslina and Ramli, Rizauddin and Abd Wahab, Dzuraidaqh (2020) Effect of contour interval on minimization of tool path length in pocket milling process. Journal of Engineering Science and Technology, 15 (5). pp. 3502-3513. ISSN 1823-4690

Abdullah, Mohd Ezree and Abdul Hassan, Norhidayah and Wardati, Wardati and Hainin, Mohd Rosli and Ismail, Norfarah Nadia and Md. Yusoff, Nur Izzi (2016) Evaluating the cooling rate of hot mix asphalt in tropical climate. Jurnal Teknologi (Sciences & Engineering), 78 (4). pp. 97-104. ISSN 2180–3722

Abdullah, Mohd Fahmy and Lai, Wei Sieng and Muhammad Isa, Hamdan (2019) Technical efficiency evaluation: study on Malaysian electrical and electronics firms. Asian Academy of Management Journal, 24 (2). pp. 1-19. ISSN 2180-4184

Abdullah, Norazlin and Nyuk, L. Chin and Yusof, Yus A. and A. Talib, Rosnita (2018) Modeling the rheological behavior of thermosonic extracted guava, pomelo, and soursop juice concentrates at different concentration and temperature using a new combination model. Journal of Food Processing and Preservation, 42 (2). pp. 1-11. ISSN 1745-4549

Abdullah, Norazlin and Nyuk, Ling Chin and Yusof, Yus Aniza and A. Talib, Rosnita (2018) Modelling of rheological behaviour of guava, pomelo and soursop juice concentrates via shear rate-temperature-concentration superpositioning. Journal of Food Science and Technology, 55. pp. 1207-1213. ISSN 0022-1155

Abdullah, Nur Munirah and Mohd Rus, Anika Zafiah and Abdullah, Mohammad Faiz Liew (2018) Enhancement of graphite functionality in renewable polymer composite properties. International Journal of Engineering & Technology, 7 (3.14). pp. 215-220. ISSN 2227-524X

Abdullah, Nurhanim Saadah and Abd Aziz, Mohd Ismail and Ismail, Affero and Hashim, Suhaizal (2017) Improving educator development by innovation in teaching activity via web 2.0. Mechanical Engineering, Science and Technology International Conference, 203 (NIL). pp. 1-9. ISSN 1757-899X

Abdullah, Rosmahalil Azrol (2018) Engineering students’ motivation towards the involvement in volunteerism. International Journal of Engineering & Technology, 7 (3.25). pp. 633-635. ISSN 2227-524X

Abdullah, Zubaile and Mohd Saudi, Madihah (2018) RAPID-risk assessment of android permission and application programming interface (API) call for android botnet. International Journal of Engineering & Technology, 7 (4.15). pp. 49-54. ISSN 2227-524X

Abdullahb, Abu Hannifa and Ismail, Zulhelmi and W. Idris, Wan Farhana and Ahmad, Zulsyazwan and Mohd Zuhan, Mohd Khairul Nizam (2023) Combination of cellulose tissue paper and bleach-treated graphene in stiffness reinforcement of polyvinyl alcohol film. Diamond & Related Materials, 132. pp. 1-8.

Abdullahb, Abu Hannifa and Ismail, Zulhelmi and W. Idris, Wan Farhana and Ahmad Khusairi, Zulsyazwan and Mohd Zuhan, Mohd Khairul Nizam (2023) Combination of cellulose tissue paper and bleach-treated graphene in stiffness reinforcement of polyvinyl alcohol film. Diamond & Related Materials, 13. pp. 1-8. ISSN 109697

Abdullahi, Isa and Wan Yusof, Wan Zahari (2018) Effect of the performance of physical and non-physical facilities on higher institutional facilities. Journal of Facilities Management, 16 (3). pp. 1-13. ISSN 1472-5967

Abdullahi, Tijjani and Ahmad, Norhayati and Wahit, Mat Uzir and Harun, Zawati (2018) Adhesive bonding of thermoplastic polyurethane with metallic wire. Advanced Science Letters, 24 (6). pp. 4045-4049. ISSN 1936-6612

Abdulrahman Oyekanmi, Adeleke and Abdul Latiff, Ab Aziz and Daud, Zawawi and Radin Mohamed, Radin Maya Saphira and Ab Aziz, Nur Adila and Ismail, Norli and Rafatullah, Mohd. and Ahmad, Akil and Hossain, Kaizar (2019) Adsorption of pollutants from palm oil mill effluent using natural adsorbents: optimization and isotherm studies. Desalination and Water Treatment, 169. pp. 181-190. ISSN 1944-3994

Abdulsamad, Abdulkader Omer and Wan Yusoff, Wan Fauziah and Lasyoud, Alhashmi Aboubaker (2018) The influence of the board of directors’ characteristics on firm performance: evidence from Malaysian public listed companies. Corporate Governance and Sustainability Review, 2 (1). pp. 6-13. ISSN 2519-898X

Abu Bakar, Fazleen I. and Abu Bakar, Mohd F. and Rahmat, Asmah and Abdullah, Norazlin and Sabran, Siti F. and Endrini, Susi (2018) Anti-gout potential of Malaysian medicinal plants. FRONTIERS IN PHARMACOLOGY, 9. pp. 1-14. ISSN 16639812

Abu Bakar, Fazleen Izzany and Abu Bakar, Mohd Fadzelly and Abdullah, Norazlin and Endrini, Susi and Fatmawati, Sri (2020) Optimization of extraction conditions of phytochemical compounds and anti-gout activity of euphorbia hirta L. (Ara Tanah) using response surface methodology and liquid chromatography-mass spectrometry (LC-MS) analysis. Evidence-Based Complementary and Alternative Medicine, 2020. pp. 1-13. ISSN 1741-427X

Abu Bakar, Mohd Fadzelly and Abdul Karim, Fifilyana and Perisamy, Eeswari (2015) Comparison of phytochemicals and antioxidant properties of different fruit parts of selected artocarpus species from Sabah, Malaysia. Sains Malaysiana, 44 (3). pp. 355-363. ISSN 1266039

Abu Bakar, Mohd Fadzelly and Abdul Karim, Fifilyana and Suleiman, Monica and Isha, Azizul (2015) Phytochemical constituents, antioxidant and antiproliferative properties of a Liverwort, Lepidozia borneensis Stephani from Mount Kinabalu, Sabah, Malaysia. Evidence-Based Complementary and Alternative Medicine. pp. 1-9. ISSN 1741-427X

Abu Bakar, Mohd Fadzelly and Ahmad, Nor Ezani and Suleiman, Monica and Rahmat, Asmah and Isha, Azizul (2015) Garcinia Dulcis fruit extract induced Cytotoxicity and Apoptosis in HepG2 liver cancer cell line. BioMed Research International, 10 (1). pp. 1-10. ISSN 2314-6133

Abu Bakar, Mohd Fadzelly and Lee, Angelina Mei Ling and Yasir, Suhaimi and Matanjun, Patricia (2015) Effect of different drying techniques on the phytochemical content and antioxidant activity of kappaphycus alvarezii. Journal Of Applied Phycology, 27 (4). pp. 1717-1723. ISSN 9218971

Abu Bakar Sidik, Dilaelyana and Hairom, Nur Hanis Hayati and Zainuri, Nur Zarifah and Desa, Amira Liyana and Misdan, Nurasyikin and Yusof, Norhaniza and Chin, Boon Ong and Mohammad, Abdul Wahab and Mohd Aripen, Nur Shahirah (2018) Photocatalytic degradation of industrial dye wastewater using zinc oxide polyvinylpyrrolidone nanoparticles. Malaysian Journal of Analytical Sciences, 22 (4). pp. 1-9. ISSN 1394 - 2506

Abu Seman, Noor Aslinda and Zakuan, Norhayati and Jusoh, Ahmad Yusni and Md Arif, Mohd Shoki (2012) Green supply chain management: a review and research direction. International Journal of Managing Value and Supply Chains (IJMVSC), 3 (1). pp. 1-18.

Abu Seman, Noor Aslinda and Zakuan, Norhayati and Mat Saman, Muhamad Zameri and Md Ariff, Mohd Shoki and Sulaiman, Zuraidah (2015) A study of green supply chain management, green innovation and environmental performance among Malaysian manufacturing companies. International Journal of Applied Engineering Research, 10 (89). pp. 58-62. ISSN 0973-4562

Achmad, Zainun and Ismail, Al Emran and Harimon, Mohd Azhar (2021) Study of fatigue life on aluminium composites – fly ash received T6 heat treatment and artificial aging. International Journal of Engineering Trends and Technology, 69 (2). pp. 12-18. ISSN 2231-5381

Adel Ali Al-Gheethi, Adel Ali Al-Gheethi and Rubashini A./P. Alagamalai, Rubashini A./P. Alagamalai and Noman, Efaq Ali and Radin Mohamed, Radin Maya Saphira and Ravi Naidu, Ravi Naidu (2023) Degradation of cephalexin toxicity in non-clinical environment using zinc oxide nanoparticles synthesized in Momordica charantia extract; Numerical prediction models and deep learning classification. Chemical Engineering Research and Design, 192. pp. 180-193.

Adeleke, A.O. and Ab. Latiff, Ab Aziz and Al-Gheethi, A.A. and Daud, Zawawi (2017) Optimization of operating parameters of novel composite adsorbent for organic pollutants removal from POME using response surface methodology. Chemosphere, 174 (NIL). pp. 232-242. ISSN 0045-6535

Adnan, Mohd Shalahuddin and Mohd Anuar, Mohd Aliff and Nda, Muhammad and Rahmat, Siti Nazahiyah (2017) Investigation of infiltration rate on soft claythat affecting the ponding time. MATEC Web of Conferences, 103 (NIL). pp. 1-8. ISSN 1816-093X

Adnan, N.N. and Bidin, N. and Taib, N.A.M. and Haris, H. and Fakaruddin, M. and Hashim, A.M. and Krishnan, G. and Harun, S.W. (2016) PassivelyQ-switched flashlamp pumped Nd:YAG laser using liquid graphene oxide as saturable absorber. Optics and Laser Technology, 80. pp. 28-32. ISSN 0030-3992

Adnan, Suraya Hani and Abd Roni, Norwardatun and Hamidon, Nuramidah (2020) THE UTILIZATION OF RECYCLED CONCRETE AGGREGATE FROM CONSTRUCTION WASTE AS VERTICAL FILTER. Journal of critical reviews, 7 (8). pp. 1403-1409. ISSN 2394-5125

Adnan, Suraya Hani and Mohd Satti, Nadia Syuhada and Jameli, Mohammad Ikhmal and Osman, Mohamad Hairi and Jamellodin, Zalipah and Alisibramulisi, Anizahyati (2023) PERFORMANCE OF BEAM CONTAINING BAMBOO ASH IN CONCRETE MIXTURE. Malaysian Construction Research Journal, 39 (1). pp. 67-76.

Adonia, Siti Azirah and Ahmad, Kamilah and Mohamed Zabri, Shafie (2018) An exploration of financing preferences among entrepreneurs: the case of micro enterprises in Kelantan, Malaysia. WSEAS TRANSACTIONS on BUSINESS and ECONOMICS, 15. pp. 375-384. ISSN 2224-2899

Agung, E. H and M. Hamdan, M. H. and Siregar, J. P. and Bachtiar, D. and Tezara, C. and J. Jamiluddin, J. Jamiluddin (2018) Water absorption behaviour and mechanical performance of pineapple leaf fibre reinforced polylactic acid composites. International Journal of Automotive and Mechanical Engineering (IJAME), 15 (4). pp. 5760-5774. ISSN 2229-8649

Ahad, Rosnee and Mustafa, Mohamad Zaid and Mohamad, Suhaimi and Abdullah, Nur Hanim Saadah and Nordin, Mohd Norazmi (2021) Work attitude, organizational commitment and emotional intelligence of Malaysian vocational college teachers. Journal of Technical Education and Training, 13 (1). pp. 15-21. ISSN 2229-8932

Ahmad, Hilton (2016) Stress distribution of secondary bending in single-lap bolted joints with dissimilar joining plates and plate types. Jurnal Teknologi, 78 (5-5). pp. 1-7. ISSN 2180–3722

Ahmad, Kamilah and Mohamed Zabri, Shafie (2018) The deployment of performance measurement system under the supply chain management environment: the case of Malaysian manufacturing companies. Management and Production Engineering Review, 12 (2). pp. 83-93. ISSN 1751-8202

Ahmad, Kamilah and Mohamed Zabri, Shafie and Atan, Siti Anisah (2021) Multidimensional performance measures and factors and their linkage with performance. International Journal of Emerging Markets. ISSN 1746-8809

Ahmad, M. K. and Soon, C. F. and Nafarizal, N. and Suriani, A. B. and Mohamed, A. and Mamat, M. H. and Malek, M. F. and Shimomura, M. and Murakami, K. (2018) Improvement in photovoltaic performance of rutile-phased TiO2 nanorod/nanoflower-based dye-sensitized solar cell. Journal of the Australian Ceramic Society, 54. pp. 663-670. ISSN 2510-1560

Ahmad, Md Fauzi and Khor, Chun Hoong and Abdul Hamid, Norhadilah and Sarpin, Norliana and Zainal, Rozlin and Ahmad, Ahmad Nur Aizat and Hassan, Mohd Fahrul and Mohd Nawi, Mohd Nasrun (2018) The impact of product design and process design towards new product performance in manufacturing industry: a survey result in Malaysia. International Journal of Supply Chain Management, 7 (2). pp. 102-106. ISSN 2050-7399

Ahmad, Md Fauzi and Siew Yin, Jessica Chan and Muhd Nor, Nik Hisyamudin and Chan, Shiau Wei and Abdul Hamid, Norhadilah and Ahmad Zaidi, Ahmad Nur Aizat and Abdul Rahman, Nor Aida and Mohd Nawi, Mohd Nasrun (2018) The impact of TQM tools and organisation performance in Malaysia small and medium enterprise (SMEs): a survey result. International Journal of Supply Chain Management, 7 (3). 101-`106. ISSN 2050-7399

Ahmad, Muhamad Fazrulhelmi and Isa, Khairunesa and Palpanadan, Sarala @ Thulasi and Johar, Siti Sarawati and Jamin, J (2020) Happiness indicator of MTUN staff's success factor. International Journal of Recent Technology and Engineering (IJRTE), 8 (6). pp. 2868-2871. ISSN 2277-3878

Ahmad, Naveed and Harun, Amran and Khizar, Hafiz Muhammad Usman and Othman, Bestoon Abdulmaged and Zulqarnain, Muhammad (2020) The effect of electronic word of mouth communication on purchase intention moderate by trust: a case online consumer of Bahawalpur Pakistan. International Journal of Advanced Science and Technology, 29 (9s). pp. 4995-5008. ISSN 2005-4238

Ahmad, Nurul Atiqah and Dahlan, Samsul Haimi and Cholan, Noran Azizan and Ahmad, Harith and Zian, Cheak Tiu (2018) Switchable 10, 20, and 30 GHz region photonics-based microwave generation using thulium-doped fluoride fiber laser. Journal of the Optical Society of America B, 35 (7). pp. 1603-1608. ISSN 0740-3224

Ahmad, Siti Zu Nurain and Hamdan, Rafidah and Wan Mohamed, Wan Afnizan and Othman, Norazila and Mohd Zin, Nur Shaylinda (2018) Chemical composition, pH value, and points of zero charge of high calcium and high iron electric arc furnace slag. International Journal of Engineering & Technology, 7 (2.14). pp. 186-190. ISSN 2227-524X

Ahmad Azraai, Munirah and Rani, Ridhwan and Qibtiah, Raja Mariatul and Samian, Hidayah (2022) Face mask wear detection by using facial recognition system for entrance authorization. (IJACSA) International Journal of Advanced Computer Science and Applications, 13 (6). pp. 117-123. ISSN 2156-5570

Ahmad Fauzy, Fatin Azura and Ali Shah, Zuraini and Saedudin, Rd Rohmat and Kasim, Shahreen and Azadin, Ayu Alyani and Ahmar, Ansari Saleh and Hidayat, Rahmat (2018) Registration system and UTM games decision using the website application. International Journal of Engineering & Technology, 7 (2.5). pp. 45-47. ISSN 2227-524X

Ahmad Fuadi, Nur Faizura and Othman, Muhammad Fakri and Senan, Norhalina (2018) Perception of mathematics game’s design for primary school: based on teachers’ opinions. International PostGraduate Conference on Applied Science & Physics, 1049. pp. 1-6. ISSN 1742-6596

Ahmad Jamal, Ezazul Fahmee and Hashim, Mohd Yusni and Othman, Mohd Hilmi and Marwah, Omar Mohd Faizan and Mohd Amin, Azriszul and Johar, Muhammad Akmal and Ng, Chuan Huat (2018) Optimization of alkali treatment condition on tensile properties of kenaf reinforced polyester composite using response surface method. The International Journal of Integrated Engineering, 10 (1). pp. 40-46. ISSN 2229-838X

Ahmad Khalid, Shamsul Kamal and Samsudin, Noor Azah and Nordin, Nor Amirul Amri and Aripin, Muhammad Syariff (2018) Laptop cooling pad temperature monitoring system. Indonesian Journal of Electrical Engineering and Computer Science, 12 (1). pp. 420-428. ISSN 2502-4752

Ahmad Nazri, Mohamad Izzat Al Ridhwan and Abas, Nor Haslinda and Mohd Affandi, Haryanti and Deraman, Rafikullah and Hasmori, Muhammad Fikri and Nagapan, Sasitharan and Abas, Nor Ain and Mustaffa Kamal, Mohd Firdaus (2018) A survey on work-related musculoskeletal disorders among construction trades. International Journal of Integrated Engineering, 10 (4). pp. 131-139. ISSN 2229-838X

Ahmad Radzi, Nor Azim and Harun, Amran and Ramayah, T. and Mohd Kassim, Abdul Wahid and Jaratin, Lily (2018) Benefits of facebook fan/brand page marketing and its influence on relationship commitment among generation Y: empirical evidence from Malaysia. Telematics and Informatics, 35 (7). pp. 1980-1993. ISSN 0736-5853

Ahmad Shafii, Nur Hidayah and Zainulabidin, Muhd Hafeez (2021) Lepironia articulata as a sustainable acoustic absorber. Research Progress in Mechanical and Manufacturing Engineering, 2 (2). pp. 201-212. ISSN 2773-4765

Ahmad Termida, Nursitihazlin and Susilo, Yusak O. and Franklin, Joel P. and Chengxi, Liu (2018) Understanding seasonal variation in individual’s activity participation and trip generation by using four consecutive two-week travel diary. Travel Behaviour and Society, 12. pp. 52-63. ISSN 2214-367X

Ahmad Zamri, Mohd Faiz Muaz and Bahru, Raihana and Amin, Rashid and Aslam Khan, Muhammad Umar and Abd Razak, Saiful Izwan and Abu Hassan, Shukur and Abdul Kadir, Mohammed Rafiq and Mat Nayan, Nadirul Hasraf (2021) Waste to health: a review of waste derived materials for tissue engineering. Journal of Cleaner Production, 290 (25).

Ahmed, Mohamad Baharin and Ambak, Kamarudin and Ahmad Raqib, Ahmad Raqib and Sukor, Nur Sabahiah (2013) Helmet usage among adolescents in rural road from the extended theory of planned behaviour. Journal of Applied Sciences, 13 (1). pp. 161-166. ISSN 1812-5654

Ahmed, Sajjad and Joret, Ariffuddin and Katiran, Norshidah and Abdullah, Muhammad Faiz Liew and Zakaria, Zahriladha and Sulong, Muhammad Suhaimi (2023) Ultra-wide band antipodal Vivaldi antenna design using target detection algorithm for detection application. Bulletin of Electrical Engineering and Informatics, 12 (4). pp. 1-8. ISSN 2302-9285

Ahmed, Sajjad and Joret, Ariffuddin and Katiran, Norshidah and Liew Abdullah, Muhammad Faiz and Zakaria, Zahriladha and Sulong, Muhammad Suhaimi (2023) Ultra-wide band antipodal Vivaldi antenna design using target detection algorithm for detection application. Bulletin of Electrical Engineering and Informatics, 12 (4). pp. 1-8. ISSN 2302-9285

Ahmed Dheyab, Saad and Mohammed Abdulameer, Shaymaa and Mostafa, Salama A (2022) Efficient Machine Learning Model for DDoS Detection System Based on Dimensionality Reduction. Acta Informatica Pragensia, 11 (3). pp. 1-13.

Ahmed Ghaleb Amer, Abdulrahman and Sapuan, Syarfa Zahirah and Ashyap, Adel Y. I. (2023) Efficient metasurface for electromagnetic energy harvesting with high capture efficiency and a wide range of incident angles. JOURNAL OF ELECTROMAGNETIC WAVES AND APPLICATIONS. pp. 1-13.

Ahmed Jhatial, Ashfaque and Goh, Wan Inn and Mohamad, Noridah and Ali Rind, Touqeer and Sandhu, Abdul Razzaque (2020) Development of thermal insulating lightweight foamed concrete reinforced with polypropylene fibres. Arabian Journal for Science and Engineering, 45. pp. 4067-4076. ISSN 2193-567X

Ahmed Jhatial, Ashfaque and Wan, Inn Goh and Mohamad, Noridah and Lee, Wai Hong and Lakhiar, Muhammad Tahir and Abdul Samad, Abdul Aziz and Abdullah, Redzuan (2018) The mechanical properties of foamed concrete with polypropylene fibres. International Journal of Engineering and Technology, 7 (3.7). pp. 411-413. ISSN 2227-524X

Ahmed Thawaba, Abdulaziz and Ramli, Azizul Azhar and Md Fudzee, Mohd Farhan and Wadata, Junzo (2020) Characteristics for Performance Optimization of Safety-Critical System Development (SCSD). Journal of Advanced Computational Intelligence and Intelligent Informatics, 24 (2). pp. 232-242. ISSN 1883-8014

Akasah, Z. A. and A. Abdul, R. M. and F. Zuraidi, S. N. (2011) Maintenance management success factors for heritage building: a framework. Structural Repairs and Maintenance of Heritage Architecture XII, 118.

Akasah, Zainal Abidin and David Yeoh, David Yeoh and Lam, Kah Leong (2012) Analytical assessment for comparisons of triple-t precast concrete-timber composite floor using gamma method. / International Journal of Engineering Research and Applications (IJERA), 2 (6). pp. 1337-1355.

Akhilesh Kumar Sharma, Akhilesh Kumar Sharma and Antima Jain, Antima Jain and Deevesh Chaudhary, Deevesh Chaudhary and Shamik Tiwari, Shamik Tiwari and Hairulnizam Mahdin, Hairulnizam Mahdin and Zirawani Baharum, Zirawani Baharum and Shazlyn Milleana Shaharudin, Shazlyn Milleana Shaharudin and Ruhaila Maskat, Ruhaila Maskat and Mohammad Syafwan Arshad, Mohammad Syafwan Arshad (2023) An Approach to Automatic Garbage Detection Framework Designing using CNN. International Journal of Advanced Computer Science and Applications,, 14 (2). pp. 1-6.

Akhilesh Kumar Sharma, Akhilesh Kumar Sharma and Jain, Antima and Deevesh Chaudhary, Deevesh Chaudhary and Shamik Tiwari, Shamik Tiwari and Mahdin, Hairulnizam and Baharum, Zirawani and Shaharudin, Shazlyn Milleana and Maskat, Ruhaila and Arshad, Mohammad Syafwan (2023) An Approach to Automatic Garbage Detection Framework Designing using CNN. International Journal of Advanced Computer Science and Applications, 14 (2). pp. 257-262.

Al Bargi, Walid Abdullah and Ali Khalifa, Nasradeen and Daniel, Basil David and Md. Rohani, Munzilah and Samuel Odebiyi, Oluwasegun (2023) An Experimental Investigation on the Effect of Calcium Chloride As Dust Suppressant on the Strength of Unpaved Road. INTERNATIONAL JOURNAL OF SUSTAINABLE CONSTRUCTION ENGINEERING AND TECHNOLOGY, 14 (2). pp. 121-130. ISSN 2180-3242

Al Naqbi, Saeed and Md Yassin, Azlina (2022) Attributes of mobile technology adoption acceptance from users perspective. International Journal of Sustainable Construction Engineering and Technology, 13 (2). pp. 220-232. ISSN 2180-3242

Al Naqbi, Saeed and Md Yassin, Azlina (2022) Modelling the factors measuring customer service excellence for mobile application technology usage in Abu Dhabi. International Journal of Sustainable Construction Engineering and Technology, 13 (2). pp. 51-67. ISSN 2180-3242

Al-Alim, Sami. and Lajis, Mohd. Amri and Shamsudin, Shazarel and Yusu, Nur Kamilah and Altharan, Yahya and Didane, Djamal Hissein and Sai, Yazid and Sadeq, Safwan and M. Sabbar, Huda and S. Msebawi, Muntadher (2022) Effects of Preheating Temperature on Deformed AA6061 Aluminium Properties of Hot Equal Channel Angular Pressing (ECAP) by Using Deform-3D Software. Arabian Journal for Science and Engineering. pp. 1-9. ISSN 3381–3389

Al-Alimi, Sami. and Lajis, Mohd. Amri. and Shamsudin, Shazarel and Yusuf, Nur Kamilah and Altharan, Yahya and Didane, Djamal Hissein and Saif, Yazid and Sadeq, Safwan and M. Sabbar, Huda and S. Msebawi, Muntadher (2023) Effects of Preheating Temperature on Deformed AA6061 Aluminium Properties of Hot Equal Channel Angular Pressing (ECAP) by Using Deform-3D Software. Arabian Journal for Science and Engineering. pp. 1-9.

Al-Alimi, Sami. and Lajis, Mohd. Amri. and Shamsudin, Shazarel and Yusuf, Nur Kamilah and Altharan, Yahya and Didane, Djamal Hissein and Saif, Yazid and Sadeq, Safwan and M. Sabbar, Huda and S. Msebawi, Muntadher (2023) Effects of Preheating Temperature on Deformed AA6061 Aluminium,Properties of Hot Equal Channel Angular Pressing (ECAP) by Using Deform-3D Software. Arabian Journal for Science and Engineering. pp. 1-9.

Al-Azam, Sharaf Ahmed and Sarea, Hammed and Sulong, Muhammad Suhaimi (2021) Biometric authentication using fingerprint and keypad for door lock securtiy system. The Middle East International Journal for Social Sciences (MEIJSS), 3 (3). pp. 151-157.

Al-Buriahi, Abdullah Khaled and M. Al-shaibani, Muhanna and Radin Mohamed, Radin Maya Saphira and Al-Gheethi, Adel Ali and Sharma, Ajit and Ismail, Norli (2022) Ciprofloxacin removal from non-clinical environment: A critical review of current methods and future trend prospects. Journal of Water Process Engineering, 47. pp. 1-20. ISSN 2214-7144

Al-Fasih, M. Y. and Kueh, A. B. H. and W.Ibrahim, M. H. (2020) Failure behavior of sandwich honeycomb composite beam containing crack at the skin. PLoS ONE, 15 (2). pp. 1-19. ISSN 19326203

Al-Gheethi, Adel and Noman, Efaq and David, Bala Jeremiah and Mohamed, Radin and Abdullah, Abd. Halid and Nagapan, Sasitharan and Mohd, Amir Hashim (2018) A review of potential factors contributing to epidemic cholera in Yemen. Journal of Water and Health, 16 (5). pp. 667-680. ISSN 1477-8920

Al-Ghriybah, Mohanad and Didane, Djamal Hissein (2023) DEVELOPMENT OF WIND-SOLAR MAPS IN AQABA, JORDAN AS POTENTIAL SOURCES FOR POWER GENERATION. Journal of Applied Engineering Science, 21 (2). pp. 1-12. ISSN 1451-4117

Al-Ghriybah, Mohanad and Hissein Didane, Djamal (2023) DEVELOPMENT OF WIND-SOLAR MAPS IN AQABA, JORDAN AS POTENTIAL SOURCES FOR POWER GENERATION. Journal of Applied Engineering Science, 21 (1). pp. 112-123. ISSN 1451-4117

Al-Juhais, Lafta Flayih Muhsin and Mas, Fawzi and Mohammad, Hafidh Hassan (2020) Numerical study on heat transfer enhancement in a curved channel with baffles. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 68 (2). pp. 72-83. ISSN 2289-7879

Al-Maqtari, Qais Ali and Al-Gheethi, Adel Ali Saeed and Ghaleb, Abduljalil D.S. and Mahdi, Amer Ali and Al-Ansi, Waleed and Noman, Abeer Essam and Al-Adeeb, Abdulqader and Olatound´e Odjo, Aboudou Kabirou and Du, Yuhang and Wei, Minping and Yao, Weirong (2022) Fabrication and characterization of chitosan/gelatin films loaded with microcapsules of pulicaria jaubertii extract. Food Hydrocolloids, 129. pp. 1-15. ISSN 0268-005X

Al-Rahmi, Ali Mugahed and Shamsuddin, Alina and Wahab, Eta and Al-Rahmi, Waleed Mugahed and Alturki, Uthman and Aldraiweesh, Ahmed and Almutairy, Sultan (2022) Integrated the role of UTAUT and TTF model to evaluate social media use for teaching and learning in higher education. Social Media Use for Teaching and Learning in Higher Education, 10. pp. 1-13.

Al-Ttowi, Abobakr and Didane, Djamal Hissein and Abdullah, Mohammad Kamil and Manshoor, Bukhari (2022) Wind and solar resources assessment techniques for wind-solar map development in Jeddah, Saudi Arabia. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 96 (1). pp. 11-24.

Al-Wrafy, Fairoz Ali and Alariqi, Reem and Ali Noman, Efaq and Al-Gheethi, Adel Ali and Mutahar, Mahdi (2023) Pseudomonas aeruginosa behaviour in polymicrobial communities: The competitive and cooperative interactions conducting to the exacerbation of infections. Microbiological Research, 268. pp. 1-11.

Al-Wrafy, Fairoz Ali and Alariqi, Reem and Noman, Efaq Ali and Al-Gheethi, Adel Ali Saeed and Mutahar, Mahdi (2023) Pseudomonas aeruginosa behaviour in polymicrobial communities: The competitive and cooperative interactions conducting to the exacerbation of infections. Microbiological Research, 268. pp. 1-11.

Alaa A., Shakir and Wan Ibrahim, M. H and Shahidan, S (2018) The effect of palm oil clinker and oil palm shell on the compressive strength of concrete. Iranian Journal of Science and Technology, Transactions of Civil Engineering, 43. pp. 1-14. ISSN 2228-6160

Alakbaree, Maysaa and Amran, Sayazwani and Mohd Shamsir, Mohd Shamsir and H. Ahmed, Haron and Hamza, Muaawia and Alonazi, Mona and Warsy, Arjumand and Ab Latif, Nurriza (2022) Human G6PD variant structural studies: Elucidating the molecular basis of human G6PD deficiency. Gene Reports, 27. pp. 1-10.

Albariman, N.H. and Sabran, Siti Fatimah and Othman, N.W. and Ishak, N. and Dheyab, A.S. and Anjur, N. (2020) Insecticidal and repellant activities of Southeast Asia plants towards insect pests: a review. Asian Journal of Chemistry, 32 (5). pp. 1026-1032. ISSN 0970-7077

Albarkani, Mosab Sultan Saeed and Shafii, Haryati (2021) Construction safety and performance in Malaysian construction industry: a review. Journal of Technology Management and Business, 8 (2). pp. 79-93. ISSN 2289-7224

Ali, Mohamad Hanafi and Azmir, Nor Azali and Yahya, Musli Nizam (2018) Prediction on hand arm vibration exposure cause-effect among grass-cutting workers in Malaysia. Advanced Science Letters, 7 (3.24). pp. 48-54. ISSN 2227-524X

Ali, Muazam and Omar, Siti Sarah and Hasan, Nawzad Majeed (2023) A Conceptual Study Of Entrepreneurial Intentions Based On The Theory Of Planned Behavior, Entrepreneurial Event Model And Theory Of Self-Efficacy. Social Sciences Journal, 13 (1). pp. 3875-3891.

Ali, Rabei Raad and Mohamad, Kamaruddin Malik and Jamel, Sapiee and Ahmad Khalid, Shamsul Kamal (2018) Extreme learning machine classification of file clusters for evaluating content-based feature vectors. International Journal of Engineering & Technology, 7 (4.36). pp. 167-171. ISSN 2227-524X

Ali Esmail, Bashar and A Majid, Huda and Zainal Abidin, Zuhairiah and Dahlan, Samsul Haimi and Himdi, Mohamed and Dewan, Raimi and A Rahim, Mohamad Kamal and AL-Fadhali, Najib (2020) Reconfigurable radiation pattern of planar antenna using metamaterial for 5G applications. Materials, 13 (3). pp. 1-15. ISSN 1996-1944

Ali Mangi, Sajjad and Wan Ibrahim, Mohd Haziman and Hussain Khahro, Shabir and Jamaluddin, Norwati and Shahidan, Shahiron (2020) Development of supplementary cementitious materials: a systematic review. International Journal of Advanced Science and Technology, 29 (9s). pp. 4682-4691. ISSN 20054238

Ali Tighnavard Balasbaneh, Ali Tighnavard Balasbaneh and Willy Sher, Willy Sher and David Yeoh, David Yeoh and Yasin, Mohd Norazam (2023) Economic and environmental life cycle perspectives on two engineered wood products: comparison of LVL and GLT construction materials. Environmental Science and Pollution Research. pp. 1-18.

Alias, Aisyah Humaira and Md. Tahir, Paridah and Abdan, Khalina and Salit, Mohd Sapuan and Wahab, Mohd Saidin and Saiman, Mohd Pahmi (2018) Evaluation of kenaf yarn properties as affected by different linear densities for woven fabric laminated composite production. Sains Malaysiana, 47 (8). pp. 1853-1860. ISSN 0126-6039

Alias, Maizam and Akasah, Zainal Abidin and Kesot, Mohd Jahaya (2012) Self-efficacy, locus of control and attitude among engineering students: appreciating the role of affects in learning efforts. Procedia - Social and Behavioral Sciences, 56. pp. 183-190.

Alias, R. and Abd-Alhameed, R. A. and Excell, P. S. (2012) A conducting domain surface boundary applied to hybrid FEM-FDTD Electromagnetic Models. International Journal of Advanced Computer Science and Applications, 2 (10). pp. 382-384. ISSN 2156-5570

Alias, R. and Abd-Alhameed, R. A. and Excell, P. S. (2012) A conducting domain surface boundary applied to hybrid FEM-FDTD Electromagnetic models. International Journal of Advanced Computer Science and Applications, 2 (10). pp. 382-384.

Alias, Siti Salwa and Harun, Zawati and Abd Latif, Intan Suyana (2018) Characterization and performance of porous photocatalytic ceramic membranes coated with TiO2 via different dip-coating routes. Journal of Materials Science, 53. pp. 11534-11552. ISSN 0022-2461

Alkubati, M.A. and A. Khalifa, Nasradeen and A. Al-barakani, Hareth (2023) An overview of public transport reliability studies using a bibliometric analysis. Ain Shams Engineering Journal, 14. pp. 1-13.

Allah, Mohammad Zaraa and Harir, Azian and Mohamed Kamar, Haslinda (2023) Comparison of Thermal Comfort Condition of Naturally Ventilated Courtyard, Semi-Outdoor and Indoor Air-Conditioned Spaces in Tropical Climate. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 101 (1). pp. 1-14.

Allah, Mohammad Zaraa and Hariri, Azian and Mohamed Kamar, Haslinda (2023) Comparison of Thermal Comfort Condition of Naturally Ventilated Courtyard, Semi-Outdoor and Indoor Air Conditioned Spaces in Tropical Climate. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 101 (1). pp. 1-14. ISSN 2289-7879

Allah, Mohammad Zaraa and Hariri, Azian and Mohamed Kamar, Haslinda (2023) Comparison of Thermal Comfort Condition of Naturally Ventilated Courtyard, Semi-Outdoor and Indoor Air-Conditioned Spaces in Tropical Climate. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 101 (1). pp. 45-58. ISSN 2289-7879

Alnaqbi, Sami Saeed Obaid and Omar, Siti Sarah (2022) A review of the smart educational system and students' performance through teachers' efficiency in the United Arab Emirate. Journal of Positive School Psychology, 6 (3). pp. 4807-4816.

Alsabery, A.I. and Roslan, R. and Al-Smail, J.H. and Hashim, I. (2020) Effects of internal heat generation and partial heating on transient natural convection in an inclined porous cavity using LTNE model. Journal of Porous Media, 23 (2). pp. 139-162. ISSN 1091-028X

Alsabery, Ammar I. and Tayebi, Tahar and Roslan, Rozaini and Chamkha, Ali J. and Hashim, Ishak (2020) Entropy generation and mixed convection flow inside a wavy-walled enclosure containing a rotating solid cylinder and a heat source. Entropy, 22 (6). pp. 1-20. ISSN 1099-4300

Alsanafi, Ismael Hasan and Mohd Noor, Siti Noor Fazelah and Abdul Kadir, Zulida (2019) 'Judgemental category' is the major concept in ntozake shange's “For colored girls who have considered suicide/when the rainbow is enuf”. International Journal of Engineering and Advanced Technology (IJEAT), 9 (1). pp. 256-264. ISSN 2249 – 8958

Alshaeer, Honin Ali Yahya and Irwan, J. M. and Alshalif, Abdullah Faisal and Al-Fakih, Amin and Ewais, Dina Yehia Zakaria and Salmi, Abdelatif and Alhokabi, Abdulmajeed Ali (2022) Review on carbonation study of reinforcement concrete incorporating with bacteria as self-healing approach. Materials, 15. pp. 1-17.

Alwan, Waseem and Ngadiman, Nor Hasrul Akhmal and Hassan, Adnan and Ramadhan Saufi, Syahril and Mahmood, Salwa (2023) Ensemble Classifier for Recognition of Small Variation in X-Bar Control Chart Patterns. Machines, 11 (115). pp. 1-33.

Alwan, Waseem and Ngadiman, Nor Hasrul Akhmal and Hassan, Adnan and Saufi, Syahril Ramadhan and Mahmood, Salwa (2023) Ensemble Classifier for Recognition of Small Variation in X-Bar Control Chart Patterns. Machines. pp. 1-33.

Alzaeemi, Shehab Abdulhabib and Ali Noman, Efaq and Al-shaibani, Muhanna Mohammed and Al-Gheethi, Adel and Radin Mohamed, Radin Maya Saphira and Almoheer, Reyad and Seif, Mubarak and Kim Gaik Tay, Kim Gaik Tay and Mohamad Zin, Noraziah and El Enshasy, Hesham Ali (2023) Improvement of L-asparaginase, an Anticancer Agent of Aspergillus arenarioides EAN603 in Submerged Fermentation Using a Radial Basis Function Neural Network with a Specific Genetic Algorithm (RBFNN-GA). Fermentation, 9 (200). pp. 1-15.

Alzoraiki, Mohammed and Ahmad, Abd Rahman and Ateeq, Ali Ahmed and Ahmed Naji, Gehad Mohammed and Almaamari, Qais and Hasan Beshr, Baligh Ali (2023) Impact of Teachers’ Commitment to the Relationship between Transformational Leadership and Sustainable Teaching Performance. Sustainability, 15 (4620). pp. 1-16.

Aman, Fazlina and Ishak, Anuar (2010) Boundary layer flow and heat transfer over a permeable shrinking sheet with partial slip. Journal of Applied Sciences Research, 6 (8). pp. 1111-1115.

Aman, Fazlina and Ishak, Anuar (2010) Hydromagnetic flow and heat transfer adjacent to a stretching vertical sheet with prescribed surface heat flux. Heat Mass Transfer, 46. pp. 615-620.

Aman, Fazlina and Ishak, Anuar (2010) Mixed convection flows toward a stagnation-point on a stretching sheet. Australian Journal of Basic and Applied Sciences, 4 (9). pp. 4453-4460. ISSN 1991-8178

Aman, Fazlina and Ishak, Anuar and Ioan Pop, Ioan Pop (2011) Heat transfer at a stretching/shrinking surface beneath an external uniform shear flow with a convective boundary condition. Sains Malaysiana, 40 (12). pp. 1369-1374.

Ambak, Kamarudin and Hadipramana, Josef and Abas, Nurul Aimi and Mokhatar, Shahrul Niza and Jaini, Zainorizuan (2018) Investigation on potential of recycle plastic bottles as a crash cushion for road barrier. International Journal of Integrated Engineering, 10 (4). pp. 151-155. ISSN 2229-838X

Ambak, Kamarudin and Ismail, Rozmi and Abdullah, Riza Atiq and Borhan, Muhamad Nazri (2010) Prediction of helmet use among Malaysian motorcyclist using structural equation modeling. Australian Journal of Basic and Applied Sciences, 4 (10). pp. 5263-5270. ISSN 1991-8178

Ambar, R. and Ahmad, M. S. and Abdul Jamil, M. M. (2011) Design and development of a multi-sensor monitoring device for arm rehabilitation. International Journal of Integrated Engineering (IJIE), 3 (2). pp. 55-62.

Ambar, R. and Ahmad, M. S. and Mohd Ali, A. M. and Abdul Jamil, M. M. (2011) Arduino based arm rehabilitation assistive device. Journal of Engineering Technology, 1. pp. 5-13. ISSN 2231-8798

Aminnuddin, Hazim Fadli and Ismail, Farzad and Mohammed, Akmal Nizam and Abdullah, Kamil (2020) The effect of grid skewness on non-unified compact residual distribution methods for scalar advection diffusion problems. CFD Letters, 12 (3). pp. 58-65. ISSN 2180-1363

Amir Hamzah1, Nor Shamsidah and Mamat, Mustafa and Kavikumar, J. and Lee, Siaw Chong and Ahmad, Noor’ani (2010) Impulsive differential equations by using the Euler method. Applied Mathematical Sciences,, 4 (65). pp. 3219-3232. ISSN -

Amiril, S.A.S. and Rahim, E.A. and Embong, Z. and Syahrullail, S. (2018) Tribological investigations on the application of oil-miscible ionic liquids additives in modified Jatropha-based metalworking fluid. Tribology International, 120. pp. 520-534. ISSN 0301-679X

Amkpa, Job Ajala and Badarulzaman, Nur Azam (2018) Thermal assessment of kpata fireclay for refractory applications. Advanced Materials Characterization Techniques, 1 (1S). pp. 179-184. ISSN 2581-4311

Ang, Shin Yin and Mohd Razali, Siti Noor Asyikin and Kek, Sie Long (2019) Optimized preference of security staff scheduling using integer linear programming approach. International Journal of Advanced Computer Technology (COMPUSOFT), 8 (4). pp. 1-9. ISSN 2320-0790

Antonyová, Anna and Antony, Peter and Abdullah, Abdul Halid and Nagapan, Sasitharan and Daud, Zawawi and Abubakar, Mahmoud Hijab (2018) Certain building materials with respect to their thermal properties as well as to their impact to environment. International Journal of Integrated Engineering, 10 (4). pp. 126-130. ISSN 2229-838X

Anuar, Nur Danisyah and Rahmat, Siti Nazahiyah (2022) Climate change assessment on flood occurrence in Kota Tinggi, Johor. Journal of Advancement in Environmental Solution and Resource Recovery, 2 (1). pp. 60-70.

Anwar Lashari, Tahira and Alias, Maizam and Akasah, Zainal Abidin and Kesot, Mohd Jahaya (2012) An affective¬cognitive teaching and learning framework in engineering education. ASEAN Journal of Engineering Education, 1 (1). pp. 11-24.

Arafat, Mohammad and Ishak, Izuan Amin and Mohammad, Ahmad Faiz and Khalid, Amir and Mohmad Jaát, Md. Norrizam and Yasak, Mohd Fuad (2023) Effect of Reynolds number on the wake of a Next-Generation High-Speed Train using CFD analysis. CFD Letters, 15 (1). pp. 1-12. ISSN 2180-1363

Ardhya Fadhila Pachman1, Ardhya Fadhila Pachman1 and Djamal Hissein Didane, Djamal Hissein Didane and Wijianto, Wijianto and Mohanad Al-Ghriybah, Mohanad Al-Ghriybah and Nurul Fitriah Nasir, Nurul Fitriah Nasir and Sami Al-Alimi, Sami Al-Alimi and Bukhari Manshoor, Bukhari Manshoor (2023) A Study of Global Solar Radiations Measurement in Java Island, Indonesia. Joint Journal of Novel Carbon Resource Sciences & Green Asia Strateg, 10 (1). pp. 212-218.

Arham Bajuri, Muhammad Nur and Didane, Djamal Hissein and Boukhari, Mahamat Issa and Manshoor, Bukhari (2022) Computational Fluid Dynamics (CFD) analysis of different sizes of savonius rotor wind turbine. Journal of Advanced Research in Applied Mechanics, 94 (1). pp. 7-12.

Arif, Norjariah and Ibrahim, Izyan Nadhirah and Mohd Safian, Edie Ezwan (2018) Using instagram as communication platform for real estate marketing and branding purpose Sunway Iskandar Johor. Jour of Adv Research in Dynamical & Control Systems, 10 (6). pp. 363-368. ISSN 1943-023X

Ariff, Hajar and Kamardan, Muhamad Ghazali and Sufahani, Suliadi Firdaus and Ali, Maselan (2018) Review on queueing problem in healthcare. International Journal of Engineering & Technology, 7 (4.3). pp. 304-307. ISSN 2227-524X

Ariffin, Khadijah Md and Juanil, David Martin @ Daud and Kasim, Rozilah (2018) Audit on public buildings by National Audit Department and public works department: a process overview. Advanced Science Letters, 24 (5). pp. 3133-3138. ISSN 1936-6612

Ariffin, L. M. and Senu, N. and Suleiman, M. and Majid, Z.A. (2014) Embedded explicit two-step Runge-Kutta-Nystrom for solving special second-order IVPs. Applied Mathematical Sciences, 8 (94). pp. 4655-4673. ISSN 1312-885X

Arifin, Siti Nor Hidayah and Radin Mohamed, Radin Maya Saphira and Adel Al-Gheethi, Adel Al-Gheethi and Chin Wei Lai, Chin Wei Lai and Yashni Gopalakrishnan, Yashni Gopalakrishnan and Hairuddin, Nur Diyana and Dai-Viet Vo, Dai-Viet Vo (2023) Photocatalytic degradation of triclocarban in aqueous solution using a modified zeolite/TiO2 composite: kinetic, mechanism study and toxicity assessment. CHALLENGES IN MANAGING AND RISK ASSESSMENT OF EMERGING ENVIRONMENTAL POLLUTANTS. :25103-25118.

Arifin, Siti nor Hidayah and Mohamed, Radin and Adel Al-Gheethi, Adel Al-Gheethi and Chin Wei Lai, Chin Wei Lai and G. Yashni, G. Yashni (2023) Heterogeneous photocatalysis of triclocarban and triclosan in greywater: a systematic and bibliometric review analysis. INTERNATIONAL JOURNAL OF ENVIRONMENTAL ANALYTICAL CHEMISTRY, 103 (4). pp. 779-797.

Arifin, Siti nor Hidayah and Mohamed, Radin and Al-Gheethi, Adel and Wei Lai, Chin and Yashn, G. (2023) Heterogeneous photocatalysis of triclocarban and triclosan in greywater: a systematic and bibliometric review analysis. INTERNATIONAL JOURNAL OF ENVIRONMENTAL ANALYTICAL CHEMISTRY, 103 (4). pp. 779-797.

Arifki Budia Warman, Arifki Budia Warman and Wahyu Abdul Jafar, Wahyu Abdul Jafar and Musda Asmara, Musda Asmara and Kirin, Arwansyah and Sheikh Adnan Ahmed Usmani, Sheikh Adnan Ahmed Usmani (2023) Reforming Marriage Registration Policies in Malaysia and Indonesia. Bestuur, 11 (1). pp. 61-74. ISSN 2722-4708

Arifutzzaman, A. and Chin, Fhong Soon and Morsin, Marlia and Gim, Pao Lim and Aslfattahi, Navid and Mat Jubadi, Warsuzarina and Sangu, Sangeetha Siva and Mohamed Saheed, Mohamed Shuaib and Nayan, Nafarizal and Saidur, R. (2022) MXene as emerging low dimensional material in modern energy and bio application: a review. Journal of Nano Research, 74. pp. 109-154. ISSN 1661-9897

Arriffin, Maizatul Najihah and A. Mostafa, Salama and Khattak, Umar Farooq and Musa Jaber, Mustafa and Baharum, Zirawani and Defni, Defni and Gusman, Taufik (2023) Vehicles Speed Estimation Model from Video Streams for Automatic Traffic Flow Analysis Systems. INTERNATIONAL JOURNAL ON INFORMATICS VISUALIZATION, 7 (2). pp. 295-300.

Arshad, Mohd Fadzil and Awang, Haryati and Putra Jaya, Ramadhansyah and Ali, Mohamad Idris and Mohd Yusak, Mohd Ibrahim and Hainin, Mohd Rosli and Wan Ibrahim, Mohd Haziman (2018) Effect of nano black rice husk ash on the chemical and physical properties of porous concrete pavement. Journal of Southwest Jiaotong University, 53 (5). pp. 1-6. ISSN 0258-2724

Arunkumar, N. and AbedMohammed, Mazin and A. Mostafa, Salama and Ahmed Ibrahim, Dheyaa and Rodrigues, Joel J.P.C. and Albuquerque, Victor Hugo C. de (2018) Fully automatic model-based segmentation and classification approach for MRI brain tumor using artificial neural networks. Concurrency and Computation: Practice and Experience, 32 (1). pp. 1-9. ISSN 1532-0626

Ashok Vajravelu, Ashok Vajravelu and K.S. Tamil Selvan, K.S. Tamil Selvan and Abdul Jamil, Muhammad Mahadi and Anitha Jude, Anitha Jude and Isabel de la Torre Diez, Isabel de la Torre Diez (2023) Machine learning techniques to detect bleeding frame and area in wireless capsule endoscopy video. Journal of Intelligent & Fuzzy Systems. pp. 1-12.

Ashok Vajravelu, Ashok Vajravelu and K.S. Tamil Selvan, K.S. Tamil Selvan and Abdul Jamil, Muhammad Mahadi and Anitha Judec, Anitha Judec and Isabel de la Torre Diezd, Isabel de la Torre Diezd (2023) Machine learning techniques to detect bleeding frame and area in wireless capsule endoscopy video. Journal of Intelligent & Fuzzy Systems. pp. 353-363.

Ashok Vajravelu, Ashok Vajravelu and K.S. Tamil Selvan, K.S. Tamil Selvan and Abdul Jamila, Muhammad Mahadi and Anitha Jude, Anitha Jude and Isabel de la Torre Diez, Isabel de la Torre Diez (2023) Machine learning techniques to detect bleeding frame and area in wireless capsule endoscopy video. Journal of Intelligent & Fuzzy Systems. pp. 353-364. ISSN 1064-1246

Aslam Abdullah, Aslam Abdullah (2023) Effect of Graded Mesh Number on the Solution of Convection-Diffusion Flow Problem with Quadratic Source. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 103. pp. 179-191.

Asmara, Y. P. and Siregar, J. P. and Tezara, C. and Wan Nurlisa, Wan Nurlisa and Jamiluddin, J. (2016) Long term corrosion experiment of steel rebar in fly ash-based geopolymer concrete in nacl solution. International Journal of Corrosion, 2016. pp. 1-6.

Asmara, Y. P. and Sutjipto, A. G. E. and J. P., Siregar and T., Kurniawan and Jaafar, Jaafar (2019) Analyses corrosion prediction software for CO2 corrosion of carbon steel using statistical formulas. International Journal of Mechanical Engineering and Robotics Research, 8 (3). pp. 374-379. ISSN 2278-0149

Asmuin, N. and B., Basuno and Nor Salim, N. A. and Ramli, M. F. and Ariffin, L. M. and Yaakub, M. F. (2021) Horizontal axis wind turbine performance analysis. Progress in Aerospace and Aviation Technology, 1 (1). pp. 15-24.

Atil, Aida Atiqah and Mat Hassan, Nik Normunira and Roseli, Adyla Illyana and Mohamed Yusop, Fatimah and Mohd Rus, Anika Zafiah and Marsi, Noraini and Tuan Ismail, Tuan Noor Hasanah and Yahya, Nur Faezah (2023) PHYSICAL CHARACTERIZATION OF POLYURETHANECLAY COMPOSITE DOPED WITH TREATED AND UNTREATED PU WASTE AS FILLER FOR SUBGRADE LAYER APPLICATIONS. Malaysian Construction Research Journa, 39 (1). pp. 29-40.

Audah, Lukman and Sun, Zhili and Cruickshank, Haitham (2012) Comparative evaluation QoS of FTP over LEO and GEO Satellite Networks with diffserv architecture. Journal of Communication and Computer, 9. pp. 1383-1394.

Audah, Lukman and Sun, Zhili and Cruickshank, Haitham (2012) Comparative evaluation QoS of FTP over LEO and GEO satellite networks with diffserv architecture. Journal of Communication and Computer, 9. pp. 1383-1394.

Audah, Lukman and Sun, Zhili and Cruickshank, Haitham (2012) QoS Simulation and analysis of HTTP over LEO satellite constellation. Journal of Communications and Networking, 3. pp. 1-12.

Audah, Lukman and Sun, Zhili and Cruickshank, Haitham (2012) QoS simulation and analysis of HTTP over LEO satellite constellation. Journal of Communications and Networking. pp. 1-12.

Awaludin, Ali and Shahidan, Shahiron and Basuki, Achmad and Mohd Zuki, Sharifah Salwa (2018) Laminated Veneer Lumber (LVL) sengon: an innovative sustainable building material in Indonesia. International Journal of Integrated Engineering, 10 (1). pp. 17-22. ISSN 2229-838X

Awang, Mariah and C.S, Tham and Mohd Basir Ruddin, Nurhanis and Abdul Rahman, Mohamad Ashraf and Hamidon, Nuramidah and Ahmad, Faridahanim and Musa, Kamaruzaman and Nagapan, Sasitharan and Abdul Rahman, Mohd Shahril (2020) Assessment of energy saving potential and lighting system in teaching building. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 65 (1). pp. 159-169. ISSN 2289-7879

Ayob, Nuramanina and Khamidun, Mohd Hairul (2022) Assessment of surface water quality using Malaysia Water Quality Index (MWQI) and National Sanitation Foundation Water Quality Index (NSFWQI) during road construction activities. Recent Trends in Civil Engineering and Built Environment, 3 (1). pp. 381-388.

Ayokunmi, Lawal Abideen and Abu Seman, Noor Aslinda and Rashid, Umi Kartini (2022) The relationship between social media marketing and SMEs performance in Nigeria: a systemic literature review. Journal of Positive School Psychology, 6 (3). pp. 8665-8673.

Azahar, Nur Shahirah and Harun, Nur Ziadah (2023) Quantum Cryptography Experiment using Optical Devices. International Journal of Advanced Computer Science and Applications, 14 (1). pp. 1-6.

Azahari, Nur Shahirah and Harun, Nur Ziadah (2023) Quantum Cryptography Experiment using Optical Devices. International Journal of Advanced Computer Science and Applications, 14 (1). pp. 606-610.

Azahari, Nur Shahirah and Harun, Nur Ziadah (2023) Quantum Cryptography Experiment using Optical Devices. International Journal of Advanced Computer Science and Applications, 14 (1). pp. 605-610.

Azahari, Nur Shahirah and Harun, Nur Ziadah (2023) Quantum Cryptography Experiment using Opticalb Devices. International Journal of Advanced Computer Science and Applications,, 14 (1). pp. 605-610.

Azid, N. and Busthami Nur, A. H. and Md-Ali, R. and Kiong, T. T. (2022) Stop bullying! Does gender influence bullying and bully victims? International Scientific Electronic Journal, 55 (1). pp. 345-357. ISSN 2307-2334

Aziz, Aqliima and Mohd Foozy, Cik Feresa and Palaniappan, Shamala and Suradi, Zurinah (2017) You tube spam comment detection using support vector machine and k–nearest neighbor. Indonesian Journal of Electrical Engineering and Computer Science, 12 (2). pp. 612-619. ISSN 2502-4752

Azizulkarim, Azra Hazwanie and Abdul Jamil, Muhammad Mahadi and Adon, Mohamad Nazib and Ahmad, Muhammad Shukri and Mohamad Sharif, Johan and Ngadi, Md Asri and Ambar, Radzi (2018) Investigation on suitability of pulse duration parameter for HeLa cells line proliferation properties towards anti-cancer application. Journal of Physics: Conference Series, 1019. pp. 1-9. ISSN 1742-6588

Azmi, Atiqah Nabieha and Awang, Noor Azura and Zakaria, Zahariah and Abdul Hadi, Fatin Shaqira and Yuzaile, Yushazlina Roshaini (2017) Saturable absorption measurement of platinum as saturable absorber by using twin detector method based on mode-locked fiber laser. Journal of Science and Technology, 9 (3). pp. 96-100. ISSN 2229-8460

Azmi, Mohd Azham and Yahya, S.M. and Ahmad, Sufizar and Mahzan, Shahruddin and Taib, M. and Abd.Rahman, Hamimah and Taib, Hariati (2018) Effect of silica (SiO2) filler on thermal stability of polysiloxane composites. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 48 (2). pp. 117-124. ISSN 2289-7879

Azmi, Muhammad Huzaifah and Mazlan, Muhammad Hazli and Md Salleh, NurSaliha and Takano, Hiromitsu and Jalli, Muhammad Hilmi and Razali, Muhammad Anas and Abdullah, Abdul Halim (2023) Biomechanical Study of Posterior Lumbar Interbody Fusion: A Review. International Journal of Emerging Technology and Advanced Engineering, 13 (3). pp. 182-192. ISSN 2250-2459

Azmi, Muhammad Huzaifah and Mazlan, Muhammad Hazli and Md Salleh, NurSaliha and Takano, Hiromitsu and Jallil, Muhammad Hilmi and Razali, Muhammad Anas and Abdullah, Abdul Halim (2023) Biomechanical Study of Posterior Lumbar Interbody Fusion: A Review. International Journal of Emerging Technology and Advanced Engineering, 13 (2). pp. 182-192.

Azmi, Rasyad and Yazid, Faris and Mahmud, Nizamullah and Hassan, Faradillah and Azhar, Azrini and Salimin, Suriana (2022) Modelling of micro hydropower system for small load application. Journal of Electronic Voltage and Application, 3 (1). pp. 125-132.

Azram, Nur Adila and Atan, Rodziah and Kasim, Shahreen (2018) Use of ontology approach to standardized scientific experimental data representation. Acta Electronica Malaysia (AEM), 2 (2). pp. 10-11. ISSN 2521-0505

B. Ajaj, Wisam and Amhmad Borhana Omran, Abdoulhdi and M. Elfaghi, Abdulhafid (2022) Mathematical models for temperature distribution in oil wells. Journal of Engineering Science and Technology, 17 (2). pp. 923-935. ISSN 1823-4690

Baba, Habu Mallam and Kasim, Rozilah and Aliyu, Aliyu Ahmad and Mammadi, Abubakar (2017) Non-implementation of property rating practice, any impact on community healthcare in Bauchi Metropolis Nigeria? International Journal of Research and Review, 4 (1). pp. 19-30. ISSN 2454-2237

Bablu K. Ghosh, Bablu K. Ghosh and M. Hasanuzzman, M. Hasanuzzman and Ismail Saad, Ismail Saad and Mohamad, K.A. and Hossain, Mohammad Kamal (2023) Photovoltaic technologies photo-thermal challenges: Thin active layer solar cells significance. Optik, 274.

Bablu K. Ghosh, Bablu K. Ghosh and M. Hasanuzzman, M. Hasanuzzman and Saad, Ismail and K.A. Mohamad, K.A. Mohamad and Hossain, Mohammad Kamal (2023) Photovoltaic technologies photo-thermal challenges: Thin active layer solar cells significance. Optik. pp. 1-16.

Bablu K. Ghosh, Bablu K. Ghosh and M. Hasanuzzman, M. Hasanuzzman and Saad, Ismail and Mohamad, K.A. and Hossain, Mohammad Kamal (2023) Photovoltaic technologies photo-thermal challenges: Thin active layer solar cells significance. Optik, 274. pp. 1-16.

Baco, Noraziela Syahira and Shahidan, Shahiron and Mohd Zuki, Sharifah Salwa and Ali, Noorwirdawati and Mohammad Azmi, Mohamad Azim (2020) Strength properties of untreated coal bottom ash as cement replacement. Journal of Civil Engineering Forum, 6 (1). pp. 13-18. ISSN 25495925

Badran, Mohammed Falih and Moorthy, Kohbalan and Zukifi, Nor Saradatul Akmar and Mohamad, Mohd Saberi and Deris, Safaai and Md.Sahar, Nan (2019) Propose a new firefly-fast learning network model based intrusion-detection system. International Journal of Innovative Technology and Exploring Engineering (IJITEE), 8 (12S2). pp. 146-152. ISSN 2278-3075

Badrol Hisham, Mohamad Aizol Faiz and Khamidun, Mohd Hairul and Ridzuan, Mohd Baharudin (2022) Kajian tentang pemilihan bahan penjerap semulajadi untuk menyingkirkan bahan pencemar (COD) daripada air kelabu. Recent Trends in Civil Engineering and Built Environment, 3 (1). pp. 1430-1438.

Bahari, Masitah and Mohd Kamil, Nor Amani Filzah and Akbar, Nor Azliza and Mizad, Meizareena (2018) Evaluation of fluoride concentration in water filter system for households. International Journal of Integrated Engineering, 10 (2). pp. 123-127. ISSN 2229-838X

Bahari, Nur Aishah Zafirah and Osman, Mohamad Hairi and Mahyeddin, Mohd Eizzuddin (2021) Mechanical properties of concrete containing POFA and EPS as replacement materials. Progress in Engineering Application and Technology, 2 (1). pp. 275-284.

Baharom, Md Nor Ramdon and Mahmod, Luqman Hakim and Zainal, Zainab and Ullah, Irshad and Ali, Irfan (2015) Improvement of the SAG ampacity carrying level of existing 275 KV overhead line tower by using the re-conductoring approach. ARPN Journal of Engineering and Applied Sciences, 10 (19). pp. 8547-8555. ISSN 1819-6608

Baharom, Md Nor Ramdon and Ullah, Irshad and H., Ahmad and Mahmod, Luqman Hakim and Zainal, Zainab (2016) Lightning effect on scaled protected and un-protected building structures; a simulation approach. Indonesian Journal of Electrical Engineering and Computer Science, 2 (3). pp. 401-408. ISSN 2502-4752

Baharuddin, Mohamad Faizal Tajul and Taib, Samsudin and Hashim, Roslan and Zainal Abidin, Mohd Hazreek and Ishak, Mohd Fakhrurrazi (2011) Time-lapse resistivity investigation of salinity changes at an ex-promontory land: a case study of Carey Island, Selangor, Malaysia. Environ Monit Assess. pp. 345-369.

Baharuddin, Mohamad Faizal Tajul and Taib, Samsudin and Hashim, Roslan and Zainal Abidin, Mohd Hazreek and Rahman, Nur Islami (2013) Assessment of seawater intrusion to the agricultural sustainability at the coastal area of Carey Island, Selangor, Malaysia. Arab J Geosci, 6. pp. 3909-3928.

Baharum, Zirawani and Hanif, Muhammad and Qureshi, Muhammad Imran and Mohd Raidzuan, Syazwa Nabila and Mahdin, Hairulnizam (2018) Simulation model on movement of goods in sea freight for small and medium enterprise. Indonesian Journal of Electrical Engineering and Computer Science, 11 (3). pp. 1214-1222. ISSN 2502-4752

Bahr Ennil, Ali S. and M. Elfaghi, Abdulhafid (2015) Numerical simulation of film cooling over flat plate. ARPN Journal of Engineering and Applied Sciences, 10 (6). pp. 2518-2522. ISSN 1819-6608

Bahrin, Nurlyana and Muhammad, Norhayati and Abdullah, Norazlin and Hj A Talip, Balkis and Jusoh, Samsiah and Siew, Wei Theng (2018) Effect of processing temperature on antioxidant activity of ficus carica leaves extract. Journal of Science and Technology, 10 (2). pp. 99-103. ISSN 2600-7924

Bahrom, Mohd Zaki and Manshoor, Bukhari and Md Zain, Badrul Aisham and Zaman, Izzuddin and Didane, Djamal Hissein and Abdul Haq, Reazul Haq and Ibrahim, Mohd Nizam (2023) Thrust Force for Drone Propeller with Normal and Serrated Trailing Edge. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 101 (1). pp. 160-173. ISSN 2289-7879

Bahrom, Mohd Zaki and Manshoor, Bukhari and Md Zain, Badrul Aisham and Zaman, Izzuddin and Djamal Hissein Didane, Djamal Hissein Didane and Abdul Haq, Reazul Haq and Ibrahim, Mohd Nizam (2023) Thrust Force for Drone Propeller with Normal and Serrated Trailing Edge. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 101 (1). pp. 160-173. ISSN 2289-7879

Bahrom, Mohd Zaki and Manshoor, Bukhari and Zaman, Izzuddin and Didane, Djamal Hissein and Ng, Wei Hang and Sayed Abdelaal, Muhammed Abdelfattah and Nizam Ibrahim, Mohd Nizam (2022) Numerical analysis of tribological characteristics for textured piston ring-liners in mixed lubrication with a non-circular cylinder bore. Journal of Complex Flow, 4 (2). pp. 26-32. ISSN 2672-7374

Bakht, Muhammad Paend and Haji Mohd, Mohd Norzali and Md. Ayob, Shahrin and Khan, Nuzhat and Bukar, Abba Lawan (2023) A community scale hybrid renewable energy system for sustainable power supply during load shedding. Indonesian Journal of Electrical Engineering and Computer Science, 31 (1). pp. 33-43. ISSN 2502-4752

Bakhuraisa, Yaser and Abd Aziz, Azlan and Tan, Kim Geok and Jamian, Saifulnizan and Mustakim, Fajaruddin (2022) A survey of ranging techniques for vehicle localization in intelligence transportation system: challenges and opportunities. International Journal of Electrical and Computer Engineering (IJECE), 12 (6). pp. 6248-6260. ISSN 2088-8708

Bakhuraisa, Yaser A. and Abd Aziz, Azlan B and Geok, Tan K. and Abu Bakar, Norazhar and Jamian, Saifulnizan and Mustakim, Fajaruddin (2023) Supervised Learning Technique for First Order Multipaths Identification of V2V Scenario. World Electric Vehicle Journal, 14 (109). pp. 1-19.

Balasbaneh, Ali Tighnavard and Sher, Willy and Yeoh, David (2022) Recommending a new building structure to alleviate environmental impact in tropical climates: increasing the use of wood in construction. The International Journal of Life Cycle Assessment. pp. 885-901.

Bamatraf, Abdullah and Ibrahim, Rosziati and Mohd. Salleh, Mohd. Najib (2011) A new digital watermarking algorithm using combination of Least Significant Bit (LSB) and inverse bit. JOURNAL OF COMPUTING PRESS, 3 (4). pp. 1-8.

Ban, Huat Ng and Akasah, Zainal Abidin (2013) the development of a newly designed building performance survey framework for energy efficient building: a review. International Journal of Application or Innovation in Engineering & Management (IJAIEM), 2 (2). pp. 117-125. ISSN 2319 - 4847

Bano, Yasmeen and Omar, Siti Sarah and Ismail, Fadillha (2022) The relationship between succession planning practices and employee retention in public Hlis Malaysia. Journal of Positive School Psychology, 6 (6). pp. 2540-2553.

Baoju Liu, Baoju Liu and Lei Yang, Lei Yang and Jinyan Shi, Jinyan Shi and Shipeng Zhang, Shipeng Zhang and Çağlar Yalçınkaya, Çağlar Yalçınkaya and Abdullah Faisal Alshalif, Abdullah Faisal Alshalif (2023) Effect of curing regime on the immobilization of municipal solid waste incineration fly ash in sustainable cement mortar. Environmental Pollution, 317. pp. 1-11.

Baoju Liu, Baoju Liu and Lei Yang, Lei Yang and Jinyan Shi, Jinyan Shi and Shipeng Zhang, Shipeng Zhang and Çağlar Yalçınkaya, Çağlar Yalçınkaya and Alshalif, Abdullah Faisal (2023) Effect of curing regime on the immobilization of municipal solid waste incineration fly ash in sustainable cement mortar. Environmental Pollution, 317. pp. 1-11.

Bareduan, Salleh Ahmad and Hasan, Sulaiman (2012) Methodology to develop heuristic for re-entrant flow shop with two potential dominant machines using bottleneck approach. International Journal of Combinational Optimization Problems & Informatics, 3 (3).

Bareduan, Sallehahmad and Hasan, Sulaiman (2010) Makespan algorithms and heuristic for internet-based collaborative manufacturing process using bottleneck approach. J. Software Engineering & Applications, 3. pp. 96-102.

Basir, Nor Farhana and Kasim, Shahreen and Hassan, Rohayanti and Mahdin, Hairulnizam and Ramli, Azizul Azhar and Md Fudzee, Mohd Farhan and Salamat, Mohamad Aizi (2018) Sweet8 bakery booking system. Acta Electronica Malaysia (AEM), 2 (2). pp. 14-19. ISSN 2590-4043

Basyir Rodhuan, Mirza and Abdul-Kahar, Rosmila and Ameruddin, Amira Saryati and Mohd Rus, Anika Zafiah and Kim Gaik Tay, Kim Gaik Tay (2023) Computational modelling of light-matter interaction in aSi with CdSe/ZnS core/shell quantum dots and metal nanoantenna for solar cell applications. Physica Scripta, 98. pp. 1-13.

Batari, Ahmad and Aman, Mohamad Yusri and Saeed, Saeed Modibbo and Ahmed, Tijjani Yero (2017) Rutting assessment of crumb rubber modifier modified warm mix asphalt incorporating warm asphalt additive. International Research Journal of Engineering and Technology (IRJET), 4 (2). pp. 1239-1244. ISSN 2395-0072

Batcha, Mohd Faizal Mohideen and Mohd Nawi, Mohd Al-Hafiz and Sulaiman, Shaharin Anwar (2013) Numerical investigation of airflow in a swirling fluidized bed. Asian Journal of Scientific Research, 6 (2). pp. 157-166.

Batcha, Mohd Faizal Mohideen and Raghavan, Vijay (2011) Experimental studies on a swirling fluidized bed with annular distributor. Journal of Applied Sciences, 11. pp. 1-8.

Bello, Muhammad Umar and Daud @ Juanil, David Martin and Kasim, Rozilah and Aliyu, Aliyu Ahmad (2018) Community participation as mediating variable for enhancement of citizen satisfaction in Malaysian municipal councils. Batu Pahat municipal council in perspective. Journal of Advanced Research in Dynamical and Control Systems, 10 (6). pp. 56-62. ISSN 1943-023X

Bello, Muhammad Umar and Juanil, Daud and Kasim, Rozilah and Razali, Muhammad Najib and Ngadiman, Yunos and Bon, Talib (2018) Evidence of municipal awareness as a construct for enhancing citizen satisfaction in municipal council of Malaysia. International Electronic Scientific Journal, 4 (2). pp. 1001-1012. ISSN 2413-9009

Bhatti, Imtiaz Ali and Abdullah, Abd Halid and Nagapan, Sasitharan and BHATTI, Nabi Bux and Lakhiar, Muhammad Tahir and MAHAR, Muntazir Mahdi (2019) Building construction labour productivity in arid climate environment. Journal of Applied Engineering Sciences, 9 (22). pp. 125-130. ISSN 2247-3769

Bhatti, Imtiaz Ali and Abdullah, Abd Halid and Nagapan, Sasitharan and Bhatti, Nabi Bux and Sohu, Samiullah and Ahmed Jhatial, Ashfaque (2018) Implementation of building information modeling (BIM) in Pakistan construction industry. Engineering, Technology & Applied Science Research, 8 (4). pp. 3199-3202. ISSN 1792-8036

Bhatti, Uzair and Sulaiman, Noralfishah (2020) Impact of sustainability practices on share performance with mediation of green innovation: a conceptual paper. International Journal of Psychosocial Rehabilitation, 24 (2). pp. 1826-1836. ISSN 1475-7192

Bhaumik, Prof. Dr. Amiya and Selvam, Dr. Janani and Vajravelu, Dr. Ashok (2021) Role of Chief Happiness Officer (CHO) interventions to improvement in environmental fit happiness. Journal of Hunan University（Natural Sciences）, 48 (10). pp. 906-920.

Buhari, Rosnawati and Md Rohani, Munzilah and Puteh, Saifullizam (2018) Pavement life variation with material characteristics, road profiles and environmental effects. International Journal on Advanced Science, Engineering and Information Technology, 8 (6). pp. 2386-2392. ISSN 2088-5334

Bujang, H. and Aman, M. Y. and Arumugam, T. N. and Taher, M. N. M. (2023) Physical Characterization of Modified Asphalt Binder with Differing Fly Ash Geopolymer Contents. INTERNATIONAL JOURNAL OF INTEGRATED ENGINEERING, 15 (1). pp. 331-338. ISSN 2600-7916

Burhannuddin, Dirman Hanafi and Mazlan, Sulaiman and Abdul Rahman, Hisyam and Abdul Rahim, Ruzairi (2022) Wet diaper detection and notification device to alert the baby caretaker. ASEAN Engineering Journal, 12 (1). pp. 69-74.

Burhanudin, Mohd Khairy and Wan Ibrahim, Mohd Haziman and Mohd Sani, Mohd Syahrul Hisyam and Juki, Mohd Irwan and Jamaluddin, Norwati and Putra Jaya, Ramadhansyah and Shahidan, Shahiron and Basirun, Nurul Fasihah and Mohd Bosro, Mohamad Zulhairi (2018) Influence of ground coal bottom ash with different grinding time as cement replacement material on the strength of concrete. Malaysian Construction Research Journal (MCRJ), 4 (2). pp. 93-102. ISSN 1985-3807

Busthami Nur, Abdul Hamid and Azid, Nurulwahida and Md-Al, Ruzlan and Nakman, Siti Jaizah and Kiong, Tee Tze and Heong, Yee Mei (2023) Stop bullying: Evidence from an exploratory factor analysis of dominant bullying behaviors among Malaysian adolescent. International Journal of Evaluation and Research in Education, 12 (1). pp. 236-243. ISSN 2252-8822

Busthami Nur, Abdul Hamid and Azid, Nurulwahida and Md-Ali, Ruzlan and Nakman, Siti Jaizah and Kiong, Tee Tze and Heong, Yee Mei (2023) Stop bullying: Evidence from an exploratory factor analysis of dominant bullying behaviors among Malaysian adolescent. International Journal of Evaluation and Research in Education (IJERE), 12 (1). pp. 236-244. ISSN 2252-8822

Buyung, Mohd Reduan and Shafii, Haryati and Buyung, Nurul Rezuana (2018) Construction of a concept of sustainable residential college in Malaysian public universities. International Journal of Academic Research in Business and Social Sciences, 8 (4). pp. 508-520. ISSN 2222-6990

Buyung, Mohd Reduan and Shafii, Haryati and Yusoff, Noor Ain (2018) Transformation to the sustainable living college concept at Public University Malaysia. Journal of Advanced Research in Social and Behavioural Sciences, 11 (1). pp. 34-49. ISSN 2462-1951

C. Misra, Kailash and Mohamad, Mahathir and Okado, Masato (2010) Zero action on perfect crystals for ********. Symmetry, Integrability and Geometry: Methods and Applications, 6. pp. 1-12.

Caleb Chidozie Chinedu, Caleb Chidozie Chinedu and Saleem, Atif and Wan Muda, Wan Hanim Nadrah (2023) Teaching and Learning Approaches: Curriculum Framework for Sustainability Literacy for Technical and Vocational Teacher Training Programmes in Malaysia. Sustainability, 15 (2543). pp. 1-24.

Cao, Yan and Mansir, Ibrahim and Mouldi, Abir and Alsharif, Sameer and A. Aly, Ayman and Jarad, Fahd and Batcha, M. F. M. and Bouallegue, B. (2022) Sustainability and financial assessments and double-criteria optimization of a novel power/hydrogen coproduction scheme using solar power and compressed air energy storage cycle. Journal of Energy Storage, 52.

Chai, Annie and Chuah, Chai Wen (2017) SHEARS Inc. salon management system. International Journal on Informatics Visualization, 1 (4-2). pp. 246-249. ISSN 2549-9610

Chai, Teck Jung and Tang, Hing Kwong and Koh, Heng Boon (2018) Water absorption and drying shrinkage of recycled foamed aggregate concrete. Malaysian Journal of Civil Engineering, 30 (3). pp. 466-476. ISSN 2600-9498

Chan, Hwang See and Abd-Alhameed, Raed A. and Z. Abidin, Zuhairiah and J. McEwan, Neil and S. Excell, Peter (2012) Wideband printed MIMO/diversity monopole antenna for wifi/WiMAX applications. IEEE TRANSACTIONS ON ANTENNAS AND PROPAGATION, 60 (4). pp. 2028-2035.

Chan, Hwang See and Abd-Alhameed,, Raed A. and Z. Abidin, Zuhairiah and J. McEwan, Neil and S. Excell, Peter (2012) Wideband printed MIMO/Diversity Monopole Antenna for WiFi/WiMAX applications. IEEE TRANSACTIONS ON ANTENNAS AND PROPAGATION, 60 (4). pp. 2028-2035.

Chan, Jia Xin and Fatt Wong, Joon and Hassan, Azman and Othman, Norhayani and Abd Razak, Jeefferie and Nirmal, Umar and Hashim, Shahrir and Chee Ching, Yern and Yunos, Muhamad Zaini and Yahaya, Ridwan and U. Gunathilake, T. M. Sampath (2022) Mechanical, thermal, tribological, and flammability properties of polybutylene terephthalate composites: Comparing the effects of synthetic wollastonite nanofibers, natural wollastonite, and graphene oxide. Applied Polimer, 53463. pp. 1-17.

Che Dalim, Che Samihah and Kolivand, Hoshang and Kadhim, Huda and Sunar, Mohd Shahrizal and Billinghurst, Mark (2017) Factors influencing the acceptance of augmented reality in education: a review of the literature. Journal of Computer Sciences, 13 (11). pp. 581-589. ISSN 1549-3636

Che Ibrahim, Che Intan Hartini and Abdullah, Aslam (2021) Selig airfoils: topology of flow patterns at low reynolds number. ARPN Journal of Engineering and Applied Sciences, 16 (24). pp. 2779-2788. ISSN 1819-6608

Che Ibrahim, Che Intan Hartini and Abdullah, Aslam and Razali, Mohd. Azahari (2022) Flow topology around low reynolds number eppler airfoils with vortex shedding. ARPN Journal of Engineering and Applied Sciences, 17 (1). pp. 126-138. ISSN 1819-6608

Che Lah, Muhammad Shukri and Arbaiy, Nureize (2020) A simulation study of first-order autoregressive to evaluate the performance of measurement error based symmetry triangular fuzzy number. Indonesian Journal of Electrical Engineering and Computer Science, 18 (3). pp. 1559-1567. ISSN 2502-4752

Che Othman, Siti Fairuz and Idid, Syed Zahir and Koya, Mustapha Suleiman and Mohamed Rehan, Aisyah and Kamarudin, Kamarul Rahim (2011) Antioxidant study of garlic and red onion: a comparative study. Pertanika J. Trop. Agric. Sci., 34 (2). pp. 253-261.

Chee, Sern Lai and Hamisu, Mohamad and Mohd Salleh, Kahirol (2018) Determining the elements of TVET teachers competency for Nigerian Higher Learning Institutions. Journal of Physics: Conference Series, 1049 (1). pp. 1-8. ISSN 1742-6596

Cheong, Wei Mun and Mohd Zaid, Mohd Hafiz and Yap Wing Fen, Yap Wing Fen and Tan Sin Tee, Tan Sin Tee and Matori, Khamirul Amin and Zhi Wei Loh, Zhi Wei Loh and Mayzan, Mohd Zul Hilmi (2023) Enhancing orange-reddish emission of the Sm3+-doped ZnO-B2O3-SLS glasses for the potential glass phosphor material. Optics and Laser Technology, 158 (8). pp. 1-10.

Chin, Boon Onga and Mohammad, Abdul Wahab and Law, Yong Ng and Mahmoudi, Ebrahim and Azizkhani, Sepehr and Hairom, Nur Hanis Hayati (2017) Solar photocatalytic and surface enhancement of ZnO/rGO nanocomposite: degradation of perfluorooctanoic acid and dye. Process Safety and Environmental Protection, 112 (298-30). pp. 298-307. ISSN 0957-5820

Chin, Soon and Ahmad, Mohd Khairul and Mohd Fazli, Fatin Izyani and Abd Hamed, Noor Kamalia and Hamidi, Indah Fitriani and Khalid, Noor Sakinah (2015) Application of TIO2 nanostructure using hydrothermal method for waste water treatment. ARPN Journal of Engineering and Applied Sciences, 10 (20). pp. 9736-9738. ISSN 1819-6608

Chin Vui Sheng, Desmond Daniel and Yahya, Musli Nizam and Che Din, Nazli (2022) Sound absorption of microperforated panel made from coconut fiber and polylactic acid composite. Journal of Natural Fibers, 19 (7). pp. 2719-2729. ISSN 1544-046X

Chong, Yee Hau and Mokhatar, Shahrul Niza and Budiea, Ahmed Mokhtar Albshir (2022) Evaluation of acid attack on concrete containing spent garnet as partial sand replacement. Recent Trends in Civil Engineering and Built Environment, 3 (1). pp. 1386-1398.

Chong, Yong Khong and A Hamid, Rahayu and Wahid, Noorhaniza and Murli, Norhanifah and Othman, Muhammad Fakri (2018) Fortune run: a mobile game showcasing cultural celebration in Malaysia. International PostGraduate Conference on Applied Science & Physics, 1049. pp. 1-8. ISSN 1742-6596

Chong Zi Yao, Chong Zi Yao and Nor Azl, Mohamad Nor Azhari and Hariri, Azian and Muhamad Damanhur, Amir Abdullah and Mustafa, Mohd Syafiq Syazwan (2023) Preliminary Study on Student’s Performance and Thermal Comfort in Classroom. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 101 (1). pp. 59-72. ISSN 2289-7879

Chong Zi Yao, Chong Zi Yao and Nor Azli, Mohamad Nor Azhari and Harir, Azian and Muhamad Damanhuri, Amir Abdullah and Mustafa, Mohd Syafiq Syazwan (2023) Preliminary Study on Student’s Performance and Thermal Comfort in Classroom. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 101 (1). pp. 1-14. ISSN 2289-7879

Chong Zi Yao, Chong Zi Yao and Nor Azli, Mohamad Nor Azhari and Hariri, Azian and Muhamad Damanhuri, Amir Abdullah and Mustafa, Mohd Syafiq Syazwan (2023) Preliminary Study on Student’s Performance and Thermal Comfort in Classroom. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 101 (1). pp. 59-72. ISSN 2289-7879

Chua, Bing Liang and Mohammed, Akmal Nizam and Sapit, Azwan and Razali, Mohd Azahari and Hushim, Mohd Faisal and Khalid, Amir and Mohd Yusof, Nurul Farhana (2020) Numerical simulation of aerofoil with flow injection at the upper surface. CFD Letters, 12 (1). pp. 98-110. ISSN 2180-1363

D., Nagarajan and J., Kavikumar and M., Lathamaheswari and S., Broumi (2019) Intelligent system stability using type-2 fuzzy controller. International Journal of Integrated Engineering, 11 (1). pp. 270-282. ISSN 2229-838X

D., Nagarajan and M., Lathamaheswari and J., Kavikumar (2019) Type-2 fuzzy controller for stability of a system. Advances in Intelligent Systems and Computing, 986. pp. 197-213. ISSN 2194-5357

D., Nagarajan and M., Lathamaheswari and S., Broumi and J., Kavikumar (2019) Blockchain single and interval valued neutrosophic graphs. Neutrosophic Sets and Systems, 24. pp. 23-35. ISSN 23316055

D., Nagarajan and M., Lathamaheswari and S., Broumi and J., Kavikumar (2019) Dombi interval valued neutrosophic graph and its role in traffic control management. Neutrosophic Sets and Systems, 24. pp. 114-133. ISSN 23316055

Danjuma, Safyanu Bashir and Omar, Zamri and Abdullah, Mohd Noor (2021) Design of power device sizing and integration for solar-powered aircraft application. Journal of Mechanical Engineering, 18 (3). pp. 215-232. ISSN 1823- 5514

Darwish, Mohamad and Aris, Azmi and Puteh, Mohd Hafiz and Abdul Kadir, Aeslina and Mohamed Najib, Mohamed Zuhaili and Mustafa, Shaymaa (2020) Phosphorus extraction from fish waste bones ash by acidic leaching method. Asian Journal of Water, Environment and Pollution, 17 (2). pp. 1-6. ISSN 0972-9860

Dasril, Yosza and Muslim, Much Aziz and Al Hakim, M. Faris and Jumanto, Jumanto and Prasetiyo, Budi (2023) Credit Risk Assessment in P2P Lending Using LightGBM and Particle Swarm Optimization. Jurnal Ilmiah Teknologi Sistem Informasi. pp. 18-28. ISSN 2502-3357

Deden Witarsyah Jacob, Deden Witarsyah Jacob and Abd Alkhalec Tharwat, Muhammed.E and Md Fudzee, Mohd Farhan and Ramli, Azizul Azhar and Kasim, Shahreen and Lubis, Muharman (2023) Analysis of How Scalable Features in Hadoop/MapReduce by Internet Traffic Management. -, 13 (1). pp. 365-370. ISSN 2088-5334

Dele-Afolabi, T. T. and M. A., Azmah Hanim and K., Vidyatharran and K. A., Matori and O., Saliza Azlina and R., Calin (2022) Interfacial microstructure evolution and shear strength of MWCNTs-reinforced Sn-1.0Ag-0.5Cu (SAC105) composite solder interconnects on plain Cu and ENIAg surface finish. Journal of Materials Science: Materials in Electronics volume, 33. ISSN 8233–8246

Detho, Amir and Ali Memon, Asif and Hameed Memon, Aftab Hameed and Almohana, Abdulaziz Ibrahim and Daud, Zawawi and Rosli, Mohd Arif (2023) Sorption Kinetics, Isotherm Studies and Mechanism of Removal of Organic and Inorganic by Adsorption onto Renewable Biominera. Water Air Soil Pollut. pp. 1-10.

Detho, Amir and Memon, Asif Ali and Memon, Aftab Hameed and Almohana, Abdulaziz Ibrahim and Daud, Zawawi and Rosli, Mohd Arif (2023) Sorption Kinetics, Isotherm Studies and Mechanism of Removal of Organic and Inorganic by Adsorption onto Renewable Biomineral. Water Air Soil Pollut. pp. 1-10.

Detho, Amir and Memon, Asif Ali and Memon ·, Aftab Hameed · and Almohana, Abdulaziz Ibrahim and Daud, Zawawi and Rosli, Mohd Arif (2023) Sorption Kinetics, Isotherm Studies and Mechanism of Removal of Organic and Inorganic by Adsorption onto Renewable Biomineral. Water Air Soil Pollut. pp. 1-10.

Dheyab, Saad Ahmed and Mohammed Abdulameer, Shaymaa and Mostafa, Salama (2023) Efficient Machine Learning Model for DDoS Detection System Based on Dimensionality Reduction. Acta Informatica Pragensia, 11 (3). pp. 1-13.

Dheyab, Saad Ahmed and Mohammed Abdulameer, Shaymaa and Mostafa, Salama (2022) Efficient Machine Learning Model for DDoS Detection System Based on Dimensionality Reduction. Acta Informatica Pragensia, 11 (3).

Dheyab, Saad Ahmed and Mohammed Abdulameer, Shaymaa and Mostafa, Salama A. (2022) Efficient Machine Learning Model for DDoS Detection System Based on Dimensionality Reduction. Acta Informatica Pragensia, 11 (3). pp. 1-13.

Dihom, Hussin Ramadan and Al-Shaibani, Muhanna M. and Radin Mohamed, Radin Maya Saphira and Al-Gheethi, Adel Ali and Ajit Sharma, Ajit Sharma and Khamidun, Mohd Hairul (2022) Photocatalytic degradation of disperse azo dyes in textile wastewater using green zinc oxide nanoparticles synthesized in plant extract: A critical review. Journal of Water Process Engineering, 47. ISSN 2214-7144

Djamaluddin, Abdul Rachman and Caronge, Muhammad Akbar and Tjaronge, M. W. and Md. Noor, Nurazuwa and Rahim, Irwan Ridwan (2018) Abrasion resistance and compressive strength of unprocessed rice husk ash concrete. Asian Journal of Civil Engineering, 19. pp. 867-876. ISSN 1563-0854

Djauhari, Maman Abdurachman and Mohd Asrah, Norhaidah and Irianto, Irianto and Ibrahim, Noor Akma (2019) Monitoring variability in complex manufacturing process: data analysis viewpoint with application. International Journal of Supply Chain Management, 8 (2). pp. 1170-1177. ISSN 2051-3771

Doborjeh, Maryam and Doborjeh, Zohreh and Gollahalli, Akshay Raj and Kumarasinghe, Kaushalya and Breen, Vivienne and Sengupta, Neelava and Ramos, Josafath Israel Espinosa and Hartono, Reggio and Capecci, Elisa and Kawano, Hideaki and Othman, Muhaini and Lei, Zhou and Jie, Yang and Bose, Pritam and Chenjie, Ge (2018) From von Neumann architecture and Atanasoff’s ABC to Neuromorphic Computation and Kasabov’s NeuCube. Part II: Applications. Practical Issues of Intelligent Innovations. pp. 17-36. ISSN 2198-4182

Dr. Arwansyah Kirin, Dr. Arwansyah Kirin and Wan Ainaa Mardhiah, Wan Ainaa Mardhiah and Dr. Siti Marpuah, Dr. Siti Marpuah and Husen Ismail, Dr. Faisal and Dr. Muhammad Masrur, Dr. Muhammad Masrur and Dr. Riki Rahman, Dr. Riki Rahman (2023) The Book of Nasa’ih Al-‘Ibad and Tanqih Al-Qaul by Shaykh Nawawi Al-Banteni: A Comparative Study on The Method of Syarh Hadith. International Journal of Academic Research in Business and Social Sciences, 13 (1). pp. 109-121. ISSN 2222-6990

Dr. Arwansyah Kirin, Dr. Arwansyah Kirin and Wan Ainaa Mardhiah, Wan Ainaa Mardhiah and Dr. Siti Marpuah, Dr. Siti Marpuah and Husen Ismail, Dr. Faisal and Dr. Riki Rahman, Dr. Riki Rahman (2023) The Book of Nasa’ih Al-‘Ibad and Tanqih Al-Qaul by Shaykh Nawawi Al-Banteni: A Comparative Study on The Method of Syarh Hadith. International Journal of Academic Research in Business and Social Sciences, 13 (1). pp. 109-121. ISSN 2222-6990

Dwi Jatmoko, Dwi Jatmoko and Suyitno Suyitno, Suyitno Suyitno and Rasul, Mohamad Sattar and Nurtant, Muhammad and Nur Kholifah, Nur Kholifah and Masek, Alias and Nur, Hamid Ramadhan (2023) The Factors Influencing Digital Literacy Practice in Vocational Education: A Structural Equation Modeling Approach. European Journal of Educational Research, 12 (2). pp. 1109-1121. ISSN 2165-8714

ELHASSAN, GARBA and ZULKIFLI, SHAMSUL AIZAM and ILIYA, SOLOMON ZAKWOI and YUNUSA, ZAINAB and AHMED, MOHAMMED and KHAN, MUBASHIR HAYAT and JACKSON, RONALD (2023) Investigation on Multisampling Deadbeat Current Control With Time-Delay Compensation in Grid-Connected Inverter. Digital Object Identifier, 11. pp. 12444-12458.

ELHASSAN, GARBA and ZULKIFLI, SHAMSUL AIZAM and ZAKWOI ILIYA, SOLOMON and YUNUSA, ZAINAB and AHMED, MOHAMMED and HAYAT KHAN, MUBASHIR and JACKSON, RONALD (2023) Investigation on Multisampling Deadbeat Current Control With Time-Delay Compensation in Grid-Connected Inverter. Digital Object Identifier, 11. pp. 1-16.

ELHASSAN, GARBA and ZULKIFLI, SHAMSUL AIZAM and ZAKWOI ILIYA, SOLOMON and YUNUSA, ZAINAB and MOHAMMED AHMED, MOHAMMED AHMED and KHAN, MUBASHIR HAYAT and JACKSON, RONALD (2023) Investigation on Multisampling Deadbeat Current Control With Time-Delay Compensation in Grid-Connected Inverter. Digital Object Identifier, 11. pp. 12444-12459.

Edward, Terence Telajan and Daniel, Basil David (2022) Dangerous driving among heavy vehicle drivers along Jalan Batu Pahat-Kluang (FT050). Recent Trends in Civil Engineering and Built Environment, 3 (1). pp. 139-148.

Ee, Soong Low and Ong, Pauline and Cheng, Yee Low and Omar, Rosli (2020) Modified Q-learning with distance metric and virtual target on path planning of mobile robot. Expert Systems with Applications, 199. ISSN 0957-4174

Efendi, Riswan and Arbaiya, Nureize and Mat Deris, Mustafa (2018) A new procedure in stock market forecasting based on fuzzy random auto-regression time series model. Information Sciences, 441. pp. 113-132. ISSN 0020-0255

Elfaghi, A. M. and Asrar, W. and Omar, A. A. (2010) A High Order Compact-Flowfield Dependent Variation (HOC-FDV) method for inviscid flows. International Journal for Computational Methods in Engineering Science and Mechanics, 11. pp. 258-263. ISSN 1550-2287

Elfaghi, Abdulhafid and Omar, Ashraf Ali and Asrar, Waqar (2015) Higher-Order Compact-Flow Field-Dependent Variation (HOC-FDV) method for solving two dimensional navier-stokes equation. International Journal for Computational Methods in Engineering Science and Mechanics, 16. pp. 256-263.

Endrini, Susi and Abu Bakar, Fazleen Izzany and Abu Bakar, Mohd Fadzelly and Abdullah, Norazlin and Marsiati, Himmi (2023) Phytochemical profiling, in vitro and in vivo xanthine oxidase inhibition and antihyperuricemic activity of Christia vespertilionis leaf. Biocatalysis and Agricultural Biotechnology, 48. pp. 1-9.

Eng, May Ang and Abdullah, Norazlin and Muhammad, Norhayati and Lizardo, Rona Camille M. (2017) Effect of formulation with papaya sauce as fat replacer on butter cake texture. Journal of Science and Technology, 9 (4). pp. 56-63. ISSN 2600-7924

F. Al-dolaimy, F. Al-dolaimy and Rabei Raad Ali, Rabei Raad Ali and Noor Nabeel, Noor Nabeel and Al-Dayyeni, Wisam Subhi and Hashim Abbas, Fatima and Muhi Hariz, Hussein and A Mostafa, Salama and Jubair, Mohammed Ahmed (2023) Hybrid Optimization with Enhanced QoS-based Path Selection in VANETs. International Journal of Intelligent Engineering and Systems, 16 (4). pp. 69-80.

F. Esmail, Bashar A. and Koziel, Slawomir and Szczepanski, Stanislaw and A. Majid, Huda (2022) Overview of approaches for compensating inherent metamaterials losses. IEEE Access, 10. pp. 67058-67080. ISSN 2169-3536

Fadzil, Farihah and Fadzil, Farizah and Sulaiman, Siti Mariam and Shaharoshaha, A’isyah Mardhiyyah and Seswoya, Roslinda (2020) Mild Thermal Pre-treatment as a Method for Increasing the Methane Potential of Food Waste. International Journal of Design & Nature and Ecodynamics, 15 (3). pp. 452-430. ISSN 1755-7445

Fairolazizi, Muhammad Aiman Zhafran and Rosly, Nurhayati and Jabbar, Balasem Abdulameer (2019) Operational readiness and airport transfer (ORAT) of Kuala Lumpur air traffic control centre (KL ATCC). Journal of Aviation and Aerospace Technology, 1 (2). pp. 1-5. ISSN 2682-7433

Fan Wang, Fan Wang and Abdullah, Abd Halid (2011) Investigating thermal conditions in a tropic atrium employing CFD and DTM techniques. International Journal of Low-Carbon Technologies, 6. pp. 171-186.

Farea Shaaf, Zakarya and Abdul Jamil, Muhammad Mahadi and Ambar, Radzi (2023) A Convolutional Neural Network Model to Segment Myocardial Infarction from MRI Images. A Convolutional Neural Network Model to Segment Myocardial Infarction from MRI Images, 19 (2). pp. 150-162.

Farea Shaaf, Zakarya and Abdul Jamil, Muhammad Mahadi and Ambar, Radzi (2023) A Convolutional Neural Network Model to Segment Myocardial Infarction from MRI Images. -, 19 (2). pp. 150-162.

Fauzi, Muhamad Razizy and Amiruddin, Nurul Amira and Osman, Saliza Azlina and Mohamed Anuar, Rabiatul Adawiyah (2022) Interfacial reaction between SAC3807 lead-free solders and different copper substrate via reflow soldering process. Key Engineering Materials, 908. pp. 278-283. ISSN 1662-9795

Fauzi, Noor Akhmazillah and Mohammed, M. Farid (2015) High-pressure processing of Manuka honey: brown pigment formation, improvement of antibacterial activity and hydroxymethylfurfural content. International Journal of Food Science and Technology, 1 (178). pp. 1-8. ISSN 0950-5423

Fauzi, Siti Nur Farzilah and Musa, Sabariah (2022) Assessment of water demand from urban and rural area in Kota Bharu, Kelantan. Recent Trends in Civil Engineering and Built Environment, 3 (1). pp. 891-898.

Fiala, Brigitte and Slik, Ferry and Weising, Kurt and Maschwitz, Ulrich and Mohamed, Maryati and -, Jamsari and Guicking, Daniela (2016) Phylogeography of three closely related myrmecophytic pioneer tree species in SE Asia: implications for species delimitation. Phylogeography of three closely related myrmecophytic pioneer tree species in SE Asia: implications for species delimitation, 16. pp. 39-52. ISSN 1439-6092

Fitriani, Nurina and Ni’matuzahroh2, Ni’matuzahroh and O’Marga, Timothy Tjahja Nugraha and Radin Mohamed, Radin Maya Saphira and Imron, Muhammad Fauzul and Isnadina, Dwi Ratri Mitha and Soedjono, Eddy Setiadi (2022) Optimization of slow sand filtration for the raw municipal wastewater treatment by using the blood cockle (anadara granosa) shell as an alternative filter media through the response surface methodology. Journal of Ecological Engineering, 23 (6). pp. 100-111.

Francesco Bianco, Francesco Bianco and Adel Ali Saeed Al-Gheethi, Adel Ali Saeed Al-Gheethi and Marco Race, Marco Race (2023) Coupling of Anammox Activity and PAH Biodegradation: Current Insights and Future Directions. Processes, 11 (458). pp. 1-13.

Fulazzaky, M. A. and A. Salim, N. A. and Khamidun, M. H. and Puteh, M. H. and M. Yusof, A. R. and Abdullah, N. H. L. and Syafuddin ·, A. and Zaini, M. A. A. (2022) The mechanisms and kinetics of phosphate adsorption onto iron‑coated waste mussel shell observed from hydrodynamic column. International Journal of Environmental Science and Technology. pp. 6345-6358.

Gan Pei Yee, Gan Pei Yee and Rusiman, Mohd Saifullah and Ismail, Shuhaida and Suparman, Suparman and Mohamad Hamzah, Firdaus and Shaf, Muhammad Ammar (2023) K-means clustering analysis and multiple linear regression model on household income in Malaysia. IAES International Journal of Artificial Intelligence (IJ-AI), 12 (2). pp. 731-738. ISSN 2252-8938

Gatea, Anwer Abdulhussein and Batcha, Mohd Faizal Mohideen (2021) Building energy index (BEI) of hospital buildings in Iraq: A case study. Songklanakarin J. Sci. Technol., 43 (6). pp. 1779-1785.

Gaudin-Audrain, Christine and Irwin, Nigel and Mansur, Sity and Flatt, Peter R. and Thorens, Bernard and Baslé, Michel and Chappard, Daniel and Mabilleau, Guillaume (2013) Glucose-dependent insulinotropic polypeptide receptor deficiency leads to modifications of trabecular bone volume and quality in mice. BONE, 53 (NIL). pp. 221-230. ISSN 8756-3282

Gerijih, Debie Devisser and Hazrati, K. Z. and Qibtiah, Raja Mariatul and Baharudin, N. and Razali, Nizamuddin and Ali, Khairul Fahmi A comprehensive review of a data centre for a cooling system. International Journal of Mechanical Engineering, 7 (1). pp. 1-7.

Ghaleb Amer, Abdulrahman Ahmed and Sapuan, Syarfa Zahirah and Y. I. Ashyap, Adel (2023) Efficient metasurface for electromagnetic energy harvesting with high capture efficiency and a wide range of incident angles. JOURNAL OF ELECTROMAGNETIC WAVES AND APPLICATIONS. pp. 1-13.

Ghazali, Ihwan and Abdul-Rashid, Salwa Hanim and Md Dawal, Siti Zawiah and Irianto, Irianto and Herawan, Safarudin Gazali and Fu-Haw Ho, Fu-Haw Ho and Abdullah, Rohana and Abdul Rasib, Amir Hamzah and Padzil, Nur Wardah Sufina (2023) Embedding Green Product Attributes Preferences and Cultural Consideration for Product Design Development: A Conceptual Framework. Sustainability, 15. pp. 1-19.

Ghazali, Ihwan and Abdul-Rashid, Salwa Hanim and Md Dawal, Siti Zawiah and Irianto Irianto, Irianto Irianto and Gazali Herawan, Safarudin and Fu-Haw Ho, Fu-Haw Ho and Abdullah, Rohana and Abdul Rasib, Amir Hamzah and Sufina Padzil, Nur Wardah (2023) Embedding Green Product Attributes Preferences and Cultural Consideration for Product Design Development: A Conceptual Framework. Sustainability. pp. 1-19.

Ghosh, Bablu K and Hasanuzzman, M and Saad, Ismail and Mohamad, K.A. and Hossain, Mohammad Kamal (2023) Photovoltaic technologies photo-thermal challenges: Thin active layer solar cells significance. International Journal for Light and Electron Optics 274. pp. 1-9.

Gohari, Adel and Ahmad, Anuar and Balasbaneh, Ali Tighnavard and Gohari, Ali and Hasan, Razi and Sholagberu, Abdulkadir Taofeeq (2022) Significance of intermodal freight modal choice criteria: MCDM-based decision support models and SP-based modal shift policies. Transport Policy, 121. pp. 46-60.

Gupta, Reshu and Selvam, Janani and Vajravelu, Ashok and Nagapan, Sasitharan (2023) Analysis of a Squeezing Flow of a Casson Nanofluid between Two Parallel Disks in the Presence of a Variable Magnetic Field. Symmetry. pp. 1-17.

Gupta, Reshu and Selvam, Janani and Vajravelu, Ashok and Nagapan, Sasitharan (2023) Analysis of a Squeezing Flow of a Casson Nanofluid between :Two Parallel Disks in the Presence of a Variable :Magnetic Field. Symmetry, 120 (15). pp. 1-17. ISSN 2073-8994

Guramand, S.K. and Saedudin, R.D.R. and Hassan, R. and Kasim, S. and Ramlan, R. and Salim, B. W. (2019) Optimized bio-inspired kernels with twin support vector machine using low identity sequences to solve imbalance multiclass classification. Journal of Environmental Biology, 40. pp. 563-576. ISSN 0254-870

H. Bujang, H. Bujang and M. Y. Aman, M. Y. Aman and T. N. Arumugam, T. N. Arumugam and M. N. M. Taher, M. N. M. Taher (2023) Physical Characterization of Modified Asphalt Binder with Differing Fly Ash Geopolymer Contents. INTERNATIONAL JOURNAL OF INTEGRATED ENGINEERING, 15 (1). pp. 331-338. ISSN 2600-7916

H. Majeed, Ali and Alkaldy, Esam and Zainal, Mohd Shamian and Md Nor, Danial (2020) Novel memory structures in QCA nano technology. Iraqi Journal for Electrical and Electronic Engineering, 1 (NIL). pp. 119-124. ISSN 2078-6069

H. Majeed, Ali and Zainal, Mohd Shamian and Alkaldy, Esam and Md Nor, Danial (2020) A content-addressable memory structure using novel majority gate with 5-input in quantum-dot cellular automata. International Journal of Integrated Engineering, 12 (4). pp. 28-38. ISSN 2229-838X

Hadi, Agung Efriyo and Siregar, Januar Parlaungan and Cionita, Tezara and Norlaila, Mohd Bakeri and Mohd Badari, Muhammad Amin and Irawan, Agustinus Purna and Jaafar, Jamiluddin and Rihayat, Teuku and Junid, Ramli and Fitriyana, Deni Fajar (2022) Potentiality of utilizing woven pineapple leaf fibre for polymer composite. Polymers. pp. 1-11. ISSN 2073-4360

Hadi, Muhammad Irfan and Nazri, Mohd. and Abdullah, Aslam (2020) Vortex formation in unsteady flow over NACA 4412 and NACA 4424 airfoils. ARPN Journal of Engineering and Applied Sciences, 15 (1). pp. 27-33. ISSN 1819-6608

Hairom, Nur Hanis Hayati and Mohammad, Abdul Wahab and Hassan Kadhum, Abdul Amir (2014) Effect of various zinc oxide nanoparticles in membrane photocatalytic reactor for Congo red dye treatment. Separation and Purification Technology, 137. pp. 74-81. ISSN 1383-5866

Hakim, S. J. S. and Ibrahim, M. H. W. and Mohammadhassani, M. and Yeoh, D. and M. Jaini, Z. and T. Chik, T.N. (2022) Implementing fuzzy-based artificial intelligence approach for location of damage in structures. Civil Engineering and Architecture, 10 (4). pp. 1564-1573. ISSN 2332-1121

Hakimi, Muhammad Adib and Nordin, Normayati (2022) Effect of flow compressibility in convergent-divergent nozzle. Journal of Complex Flow, 4 (2). pp. 33-38. ISSN 2672-7374

Hamdan, Muhammad Amree’ Ferdaus and Fuad, N. and Marwan, M.E (2020) Biometric multimodal security simulation on schedule Ii controlled drug. International Journal ofAdvanced Computer Systems and Software Engineering, 1 (1). pp. 12-17. ISSN 2716-5256

Hamdan, Nur Izzah and Zainulabidin, Muhd Hafeez and Kasron, Md Zainorin and Ismail, Al Emran and Kassim, Angzzas Sari (2018) Effect of perforation size on sound absorption characteristics of membrane absorber. International Journal of Integrated Engineering, 10 (4). pp. 27-34. ISSN 2229-838X

Hamdan, Nuraffefa and Yee, Mei Heong and Jailani, Azrol and Masran, Saiful Hadi and Boon Ching, Boon Ching and Tee, Tze Kiong and Mohamad, Mimi Mohaffyza (2021) Penggunaan gaya berfikir dan kemahiran berfikir aras tinggi bagi menyelesaikan masalah dalam penghasilan produk: analisis keperluan. Sains Insani, 6 (2). pp. 182-192.

Hamdan, R. and Ahmad, Siti Zu Nurain and Mohd Arshad, Nur’ain Nazirah (2018) Comparative study of high calcium and high iron filter media of unaerated and aerated steel slag filter systems in removing phosphorus. International Journal of Engineering & Technology, 7 (3.7). pp. 563-565. ISSN 2227-524X

Hamid Ali, Firkhan Ali and Mohd Sukri, Mohd Khairul Amin and Jali, Mohd Zalisham and AlFatih, Muhammad and Mohd Yusof, Mohd Azhari (2023) Web-Based Reporting Vulnerabilities System for Cyber Security Maintenance. Journal of Advanced Research in Applied Sciences and Engineering Technology, 29 (1). pp. 198-205. ISSN 2462-1943

Hamid Ali, Firkhan Ali and Mohd Sukri, Mohd Khairul Amin and Jali, Mohd Zalisham and Muhammad AlFatih, Muhammad AlFatih and Mohd Yusof, Mohd Azhari (2023) Web-Based Reporting Vulnerabilities System for Cyber Security Maintenance. Journal of Advanced Research in Applied Sciences and Engineering Technology, 29 (3). pp. 198-205. ISSN 2462-1943

Hamid Hassan, Mustafa and A. Mostafa, Salama and Baharum, Zirawani and Mustapha, Aida and Saringat, Mohd Zainuri and Afyenni, Rita (2023) A Nested Monte Carlo Simulation Model for Enhancing Dynamic Air Pollution Risk Assessment. INTERNATIONAL JOURNAL ON INFORMATICS VISUALIZATION, 6 (4). pp. 876-882.

Hamidon, Ahmad Mursyid and Sabariah, Sabariah Musa (2022) River water level time-series forecasting by using smoothing technique. Recent Trends in Civil Engineering and Built Environment, 3 (1). pp. 1312-1319.

Hamidon, Nuramidah and Embline, Tan Sze Yee and Mohamed Sunar, Norshuhaila and A. Hamid, Nor Hazren and Muhamad, Mimi Suliza and Harun, Hasnida and Ali, Roslinda and Awang, Mariah (2020) Effectiveness of lotus and duckweed in ferum removal to improve greywater quality. International Journal of Emerging Trends in Engineering Research, 8 (1). pp. 159-167. ISSN 2347-3983

Hamza, Sabah Salim and Yaakob, Mohd. Yuhazri and Ismail, Al Emran and Al Absi, Salih Meri (2019) Influence of geometric shape on the deformation performance of natural jute/epoxy specimens under axial quasi-static compression. TEST Engineeri & Management, 81. pp. 719-732. ISSN 0193-4120

Hamzah, Mohd Syahir Anwar and Ng, Celine and Abdul Sukora, Jumadi and Mohd Ali, Kamarul Syazwan and Mat Nayan, Nadirul Hasraf (2021) Electrospinning, preparation and characterization of polyvinylidene fluoride / pectin electrospun loaded with benzalkonium chloride as a drug reservoirs. Journal of Mechanical Engineering, 18 (1). pp. 39-51. ISSN 1823- 5514

Hamzah, N. and Ariffin, A. and Hamid, H. (2017) Web-based learning environment based on students’ needs. IOP Conference Series: Materials Science and Engineering, 226. pp. 1-7. ISSN 1757-8981

Hamzah, Norhasyimah and Mohd Rosli, Nor Farah Emilia and Rubani, Siti Nur Kamariah and Ariffin, Arihasnida and Zakaria, Normah (2022) Aplikasi android pembelajaran abjad Bahasa Jepun (JingoCat Apps). Innovative Teaching and Learning Journal. pp. 52-60. ISSN 2600-8572

Hamzah, Norhasyimah and Omar, Roziyati and Ariffin, Arihasnida and Rubani/, Siti Nur Kamariah and Subramaniam, Tamil Selvan (2018) Penggunaan kaedah nyanyian dalam mata pelajaran reka bentuk dan teknologi. Online Journal for TVET Practitioners (OJ-TP), 9 (1). ISSN 2289-7410

Hamzah, Norhasyimah and Zulkiflee, Siti Nadiah and Rubani, Siti Nur Kamariah and Ariffin, Arihasnida and Subramaniam, Tamil Selvan (2017) Pembangunan aplikasi android pembelajaran reka bentuk grafik digital. Online Journal for TVET Practitioners (OJ-TP), 2 (2). pp. 60-66. ISSN 2289-7410

Hamzah, Rosnamidar and Kasim, Shahreen and Hassan, Rohayanti and Mahdin, Hairulnizam and Ramli, Azizul Azhar and Md Fudzee, Mohd Farhan and Salamat, Mohamad Aizi (2018) Taxi reservation system of Batu Pahat taxi association. Acta Electronica Malaysia (AEM), 2 (2). pp. 20-24. ISSN 2590-4043

Hanif, Hanifa and Shafie, Sharidan and Roslan, Rozaini and Ali, Anati (2023) Collision of hybrid nanomaterials in an upper-convected Maxwell nanofluid: A theoretical approach. Journal of King Saud University – Science, 35. pp. 1-13.

Hanifa, Hanifa and Shafie, Sharidan and Roslan, Rozaini and Ali, Anati (2023) Collision of hybrid nanomaterials in an upper-convected Maxwell nanofluid: A theoretical approach. Journal of King Saud University – Science, 35. pp. 1-10. ISSN 102389

Hanifa Hanif, Hanifa Hanif and Sharidan Shafie, Sharidan Shafie and Rozaini Roslan, Rozaini Roslan and Anati Ali, Anati Ali (2023) Collision of hybrid nanomaterials in an upper-convected Maxwell nanofluid: A theoretical approach. Journal of King Saud University – Science, 35.

Harimon, Mohd Azhar and Miyashita, Yukio and Otsuka, Yuichi and Mutoh, Yoshiharu and Yamamoto, Shinichi (2018) High temperature fatigue characteristics of P/M and hot-forged W-Re and TZM for X-ray target of CT scanner. Materials & Design, 137. pp. 335-344. ISSN 0261-3069

Harimon, Mohd Azhar and Miyashita, Yukio and Otsuka, Yuichi and Mutoh, Yoshiharu and Yamamoto, Shinichi (2018) High temperature fatigue characteristics of P/M and hot-forgedW-Re and TZM for X-ray target of CT scanner. Materials and Design, 137. pp. 335-344. ISSN 0261-3069

Haron, Zaiton and Othman, Mohd Hanifi and Yahya, Khairulzan and Yaacob, Haryati and Hainin, Mohd. Rosli and Mohd Yusof, Mohd Badruddin (2012) Noise produced by transverse rumble strips: a case study on rural roadways. IOSR Journal of Mechanical and Civil Engineering (IOSRJMCE), 1 (5). pp. 12-16.

Harsono, Harsono and Rosanti, Susi Yulia and Abu Seman, Noor Aslinda (2019) The effectiveness of posters as a learning media to improve student learning quality. The Journal of Social Sciences Research, 5 (4). pp. 1046-1052. ISSN 2413-6670

Harun, Amran and Muslim, Aini Khalida and Dzail, Dzunnur and Othman, Bestoon Abdulmaged (2020) Star rating factors for umrah services: the perspectives of umrah operators and consumers. International Journal of Religious Tourism and Pilgrimage, 8 (4). pp. 26-36. ISSN 2009-7379

Harun, Amran and Obong, Amat and Mohd Kassim, Abdul Wahid and Lily, Jaratin (2018) The effects of destination image and perceived risk on revisit intention: a study in the south eastern coast of Sabah, Malaysia. e-Review of Tourism Research (eRTR), 15 (6). pp. 540-559. ISSN 1941-5842

Harun, Amran and Sikul, Razinah and Mohtar, Tini Maizura and Datu Eranza, Datu Razali (2015) Factors influencing job performance: a case study amongst teaching staff in Kota Kinabalu Polytechnic. Malaysian Journal of Business and Economics, 2 (2). 41 -58. ISSN 2289-6856

Harun, Zawati and Tze, Ching Ong and Matsuura, Takeshi and Hubadillah, Siti Khadijah and Dzarfan Othman, Mohd Hafiz and Ismail, Ahmad Fauzi (2018) Modelling of transport mechanisms and drying shrinkage for multilayer ceramic membrane structure. Chemical Engineering Research and Design, 133. pp. 111-125. ISSN 0263-8762

Hasbullah, Amilia and Wan Yusoff, Wan Zahari (2018) Quality of service in public higher education institution (HEI) facilities: a critical literature review. International Journal of Innovation and Business Strategy, 9 (1). pp. 64-68. ISSN 2232-044X

Hashim, Mohd Yussni and Roslan, Mohd Nazrul and Mohd Zin, Shahruddin Mahzan and Ariffin, Saparudin (2013) Determination of alkali treatment conditions effects which influence the variability of kenaf fiber mean cross sectional area. World Academy of Science, Engineering and Technology, 7 (10). pp. 2097-2100.

Hashim, N. H. and Nghiem, L. D. and Stuetz, R. M. and Khan, S. J. (2011) Enantiospecific fate of ibuprofen, ketoprofen and naproxen in a laboratory-scale membrane bioreactor. Water Research, 45. pp. 6429-6258.

Hashim, Nor H. and J. Khan, Stuart (2011) Enantioselective analysis of ibuprofen, ketoprofen and naproxen in wastewater and environmental water samples. Journal of Chromatography A, A (1218). pp. 4746-4754.

Hashim, Nor H. and Stuart J. Khan, Stuart J. Khan (2011) Enantioselective analysis of ibuprofen, ketoprofen and naproxen in wastewater and environmental water samples. Journal of Chromatography A, A (1218). pp. 4746-4754.

Hashim, Suhaizal and Abdul Rahman, Khairul Anuar and Saimi, Muhammad Ariff Nur and Baharudin, Nurhayati and Mohamed Salleh, Muhammad and Nincarean, Danakorn and Maneetien, Nopadon (2022) Comprehensive simulation of adjustable welding jig through ASIE model in refrigeration and air conditioning workshop. International Journal of Nanoelectronics and Materials, 15. pp. 1-14.

Hashim, Suhaizal and Ismail, Mohd Erfy and Ismail, Affero and Masek, Alias and Ismail, Irwan Mahazir and Razali, Nizamuddin and Samsudin, Mohd Ali (2019) The characteristics of the Computer Supported Collaborative Learning (CSCL) through Moodle: a view on students’ knowledge construction process. International Journal of Engineering & Technology, 8 (1.1). pp. 117-122. ISSN 2227-524X

Hasmori, Muhammad Fikri and Said, Ilias and Deraman, Rafikullah and Abas, Nor Haslinda and Nagapan, Sasitharan and Ismail, Mohd Hanif and Khalid, Faisal Sheikh and Roslan, Ahmad Farhan (2018) Significant factors of construction delays among contractors in Klang Valley and its mitigation. International Journal of Integrated Engineering, 10 (2). pp. 32-36. ISSN 2229-838X

Hasmuni, Noreriyanti and Ibrahim, Mustaffa and Raus, Azli Amin and Wahab, Mohd Saidin and Kamarudin, Khairu (2018) Porosity effects of AlSi10mg parts produced by selective laser melting. Journal of Mechanical Engineering, 5 (4). pp. 246-255. ISSN 2550-164X

Hassan, M. K. and Azubir, N. A. M. and H. M. I., Nizam and Toha, S. F. and Ibrahim, B. S. K. K. (2012) Optimal design of electric power assisted steering system(EPAS) using GA-PID method. International Symposium on Robotics and Intelligent Sensors 2012, 41. p. 614.

Hassan, Mustafa Hamid and A. Mostafa, Salama and Baharum, Zirawani and Mustapha, Aida and Saringat, Mohd Zainuri and Afyenni, Rita (2023) A Nested Monte Carlo Simulation Model for Enhancing Dynamic Air Pollution Risk Assessment. INTERNATIONAL JOURNAL ON INFORMATICS VISUALIZATION. pp. 876-882.

Hassan, Mustafa Hamid and A. Mostafa, Salama and Baharum, Zirawani and Mustapha, Aida and Saringat, Mohd Zainuri and Afyenni, Rita (2022) A Nested Monte Carlo Simulation Model for Enhancing Dynamic Air Pollution Risk Assessment. Inform. Visualization, 6 (4). pp. 876-882.

Hassan, Norlida Hassan and Mohmad Hassim, Yana Mazwin and Afip@Afif, Zehan Afizah and Eh Suan, Susan (2011) Online theme landscaping decision support system. Journal of Engineering and Technology, 2. pp. 85-92. ISSN 2180-3811

Hassan, S and Yusof, M S and Embong, Z and Maksud, M I (2020) A study of printed La₂O₃ on carbon-glass substrate for micro-flexographic printing process using angle resolve x-ray photoelectron spectroscopy (AEXPS) analysis. Journal of Nuclear and Related Technologies, 17 (1). pp. 8-14. ISSN 1823-0180

Hassan, S. and Yusof, M. S. and Embong, Z and Ding, S. and Maksud, M. I. (2018) Surface study of graphene ink for fine solid lines printed on BOPP Substrate in micro-flexographic printing using XPS analysis technique. IOP Conference Series: Materials Science and Engineering, 298. pp. 1-6. ISSN 1757-899X

Hassan, Ummi Kalsom and Kasim, Shahreen and Hassan, Rohayanti and Mahdin, Hairulnizam and Ramli, Azizul Azhar and Md Fudzee, Mohd Farhan and Salamat, Mohamad Aizi (2018) MOST stationery inventory management system. Acta Electronica Malaysia (AEM), 2 (2). pp. 10-13. ISSN 2590-4043

Hassan Disina, Abdulkadir and Jamel, Sapiee and Abubakar Pindar, Zahraddeen and Mat Deris, Mustafa (2018) Statistical analysis, ciphertext only attack, improvement of generic quasigroup string transformation and dynamic string transformation. Advanced Science Letters, 24 (6). pp. 4459-4463. ISSN 1936-6612

Hassanea, Abdelhamid Issa and Didane, Djamal Hissein and Tahir, Abakar Mahamat and Hauglustaine, Jean Marie and Manshoor, Bukhari and Mohideen Batcha, Mohd Faizal and Tamba, Jean Gaston and Mouangue, Ruben Martin (2022) Techno-economic feasibility of a remote PV minigrid electrification system for five localities in Chad. International Journal of Sustainable Engineering, 15 (1). pp. 179-193.

Hazreek, Z. A. M. and Hashim, M. M. M. and Asmawisham, A. M. N. and Hafiz, Z. M. and Fairus, Y. M. and Fahmy, K. A. and Ashraf, M. I. M. and Rosli, S. and Nordiana, M. M. (2018) Seawater intrusion mapping using electrical resistivity imaging (ERI) at Malaysian coastal area. International Journal of Civil Engineering and Technology (IJCIET), 9 (9). pp. 1185-1193. ISSN 0976-6308

Hazriyanto, H and Ibrahim, Badaruddin (2018) Konfirmatori faktor analisis kepuasan kerja dosen. Khazanah Ilmu Berazam, 1 (1). ISSN 2623-1042

Hazriyanto, Hazriyanto and Ibrahim, Badaruddin and Afridola, Sri (2018) A descriptive analysis of perceptional social competence instrument lecturer at the high school of Islamic Ibnu Sina Batam City. Singaporean Journal of Business, Economics and Management Studies, 6 (6). pp. 20-24. ISSN 2301-3621

Heng, Jia Yun and Mohd Safian, Edie Ezwan and Ramin, Ahmad Kaseri (2018) The concept of sustainable business location: preliminary study on purpose-built office in Malaysia. Journal of Advanced Research in Dynamical and Control Systems, 10 (6). pp. 304-308. ISSN 1943-023X

Heshammuddin, Nurul.Atikah and Al-Gheethi, Adel and Radin Mohamed, Radin Maya Saphira and Khamidun, Mohd Hairul (2023) Eliminating xenobiotics organic compounds from greywater through green synthetic nanoparticles. Environmental Research, 222. pp. 1-13.

Hidayat Mat, Mohamad Nur and Asmuin, Nor Zelawati and Md Basir, Md Faisal and Goodarzi, Marjan and Abd Rahman, Muhammad Faqhrurrazi and Khairulfuaad, Riyadhthusollehan and Jabbar, Balasem Abdulameer and Mohd Kasihmuddin, Mohd Shareduwan (2020) Influence of divergent length on the gas-particle flowin dual hose dry ice blasting nozzle geometry. Powder Technology, 364. pp. 152-158. ISSN 0032-5910

Hishamuddin, Muhammad Amzar Hakim and Mohd Jamail, Nor Akmal and Shee Kandar, Mohd Haris Asyraf and Jerferi, Muhammad Syahmi and Mohd Jamail, Nor Shahida and Kamarudin, Qamarul Ezani (2023) Electric Field Characteristics of HDPE-NR Biocomposite Under Breakdown Condition. INTERNATIONAL JOURNAL OF INTEGRATED ENGINEERING, 15 (1). pp. 191-202. ISSN 2600-7916

Ho, C. S. and Mohd Nor, M. K. and Lajis, M. A. and A. Samad, M. S. (2022) Damage characteristics of recycled aluminium alloys AA6061 undergoing finite strain deformation of tensile loading. The International Journal of Integrated Engineering, 14 (4). pp. 1-9.

Ho, Yoong Chow and Hasan, Sulaiman and Bareduan, Ahmad Salleh (2013) Basic concept of implementing Artificial Bee Colony (ABC) system in flow shop scheduling. Applied Mechanics and Materials, 315. pp. 385-388. ISSN 1660-9336

Hock, Hung Chieng and Wahid, Noorhaniza and Ong, Pauline and Perla, Sai Raj Kishore (2018) Flatten-T Swish: a thresholded ReLU-Swish-like activation function for deep learning. International Journal of Advances in Intelligent Informatics, 4 (2). pp. 76-86. ISSN 2442-6571

Hong-Ha T. Nguyen, Hong-Ha T. Nguyen and Ha Tran Nguyen, Ha Tran Nguyen and Shams Forruque Ahmed, Shams Forruque Ahmed and Natarajan Rajamohan, Natarajan Rajamohan and Mohammad Yusuf, Mohammad Yusuf and Ajit Sharma, Ajit Sharma and Priya Arunkumar, Priya Arunkumar and Balakrishnan Deepanraj, Balakrishnan Deepanraj and Huu-Tuan Tran, Huu-Tuan Tran and Adel Al-Gheethi, Adel Al-Gheethi and Dai-Viet N. Vo, Dai-Viet N. Vo (2023) Emerging waste-to-wealth applications of fly ash for environmental remediation: A review. Environmental Research, 227. pp. 1-13.

Hos, Jamaluddin and Kusujiarti, Siti and Jumintono, Jumintono and Ambo Upe, Ambo Upe and Muhammad Arsyad, Muhammad Arsyad and Hasniah, Hasniah and Firdaus Yuni Dharta, Firdaus Yuni Dharta and Jemma Natanson, Jemma Natanson (2021) Confict management in multiethnic communities: a case study in Southeast Sulawesi, Indonesia. Journal of International Migration and Integration.

Hou Ming Chong, Hou Ming Chong and Xien Yin Yap, Xien Yin Yap and Kim Seng Chia, Kim Seng Chia (2023) Effects of Different Pre-Trained Deep Learning Algorithms as Feature Extractor in Tomato Plant Health Classification. PATTERN RECOGNITION AND IMAGE ANALYSIS AUTOMATED SYSTEMS, HARDWARE AND SOFTWARE, 33 (1). pp. 12-19.

Hubadillah, Siti Khadijah and Othman, Mohd Hafiz Dzarfan and Matsuuraa, Takeshi and Ismail, A.F. and A. Rahman, Mukhlis and Harun, Zawati and Jaafar, Juhana and Nomur, Mikihiro (2018) Fabrications and applications of low cost ceramic membrane from kaolin: a comprehensive review. Ceramics International, 44. pp. 4538-4560. ISSN 0272-8842

Hui, Hwang Goh and Lan, Zhentao and Zhang, Dongdong and Wei Dai, Wei Dai and Kurniawan, Tonni Agustiono and Kai, Chen Goh (2022) Estimation of the state of health (SOH) of batteries using discrete curvature feature extraction. Journal of Energy Storage, 50. pp. 1-15.

Hui, Hwang Goh and Li, Chunyu and Zhang, Dongdong and Dai, Wei and Chee, Shen Lim and Kurniawan, Tonni Agustiono and Kai, Chen Goh (2022) Application of choosing by advantages to determine the optimal site for solar power plants. Scientific Reports, 12 (4113). ISSN 2045-2322

Hui, Hwang Goh and Lian Zong, Lian Zong and Zhang, Dongdong and Hui Liu, Hui Liu and Wei Dai, Wei Dai and Chee, Shen Lim and Kurniawan, Tonni Agustiono and Tze Kin Teo, Kenneth and Kai, Chen Goh (2022) Mid- and long-term strategy based on electric vehicle charging unpredictability and ownership estimation. International Journal of Electrical Power and Energy Systems, 142. pp. 1-14.

Hui, Hwang Goh and Luo, Qinwen and Zhang, Dongdong and Dai, Wei and Chee, Shen Lim and Kurniawan, Tonni Agustiono and Kai, Chen Goh (2021) A hybrid SDS and WPT-IBBO-DNM based model for ultra-short term photovoltaic prediction. CSEE Journal of Power and Energy Systems. pp. 1-12.

Hui, Hwang Goh and Peng, Gumeng and Zhang, Dongdong and Wei Dai, Wei Dai and Kurniawan, Tonni Agustiono and Kai, Chen Goh and Chin, Leei Cham (2022) A new wind speed scenario generation method based on principal component and R-Vine Copula theories. Energies, 15. pp. 1-21. ISSN 1996-1073

Hui, Ling Chua and Huong, Audrey (2022) Photoacoustic phase angle for noninvasive monitoring of microcirculatory change in human skin: a preliminary investigation. Jurnal Teknologi (Sciences & Engineering), 84 (4). pp. 159-166. ISSN 2180–3722

Hui Hwang Goh, Hui Hwang Goh and Qinwen Luo, Qinwen Luo and Dongdong Zhang, Dongdong Zhang and Hui Liu, Hui Liu and Wei Dai, Wei Dai and Chee Shen Lim, Chee Shen Lim and Kurniawan, Tonni Agustiono and Kai Chen Goh, Kai Chen Goh Hybrid SDS and WPT-IBBO-DNM Based Model for Ultra-short Term Photovoltaic Prediction. CSEE JOURNAL OF POWER AND ENERGY SYSTEMS, 9 (1). pp. 1-11.

Hui Hwang Goh, Hui Hwang Goh and Qinwen Luo, Qinwen Luo and Dongdong Zhang, Dongdong Zhang and Hui Liu, Hui Liu and Wei Dai, Wei Dai and Chee Shen Lim, Chee Shen Lim and Tonni Agustiono Kurniawan, Tonni Agustiono Kurniawan and Kai Chen Goh, Kai Chen Goh Hybrid SDS and WPT-IBBO-DNM Based Model for Ultra-short Term Photovoltaic Prediction. CSEE JOURNAL OF POWER AND ENERGY SYSTEMS, 9 (1). pp. 66-76.

Hui Hwang Goh, Hui Hwang Goh and Qinwen Luo, Qinwen Luo and Dongdong Zhang, Dongdong Zhang and Hui Liu, Hui Liu and Wei Dai, Wei Dai and Chee Shen Lim, Chee Shen Lim and Wei Dai, Member, Wei Dai, Member and Kai Chen Goh, Kai Chen Goh (2023) Hybrid SDS and WPT-IBBO-DNM Based Model for Ultra-short Term Photovoltaic Prediction. CSEE JOURNAL OF POWER AND ENERGY SYSTEMS, 9 (1). pp. 66-76.

Huong, Audrey and Wan Mahmud, Wan Mahani Hafiza and Ngu, Xavier (2020) Three-wavelength system for practical application in skin oximetry: simultaneous equations with prediction-correction approach. Indonesian Journal of Electrical Engineering and Computer Science, 19 (2). pp. 793-801. ISSN 2502-4752

Husin, Akmal Hakim and Hamzani, Syahmil Hakim and Amirnordin, Shahrin Hisham and Mohideen Batcha, Mohd Faizal and Wahidon, Rafiuddin and Wae-hayee, Makatar (2022) Drying studies of oil palm decanter cake for production of green fertilizer. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 97 (2). pp. 66-79.

Husin, Nor Aniisah and Muhamad, Musthahimah and Yahaya, Noorfatimah and Miskam, Mazidatulakmam and Nik Mohamed Kamal, Nik Nur Syazni and Asman, Saliza and Raoov, Muggundha and Mohamad Zain, Nur Nadhirah (2021) Application of a new choline-imidazole based deep eutectic solvents in hybrid magnetic molecularly imprinted polymer for efficient and selective removal of naproxen from aqueous samples. Materials Chemistry and Physics, 261. pp. 1-15. ISSN 0254-0584

Hussain, Kashif and Mohd Salleh, Mohd Najib and Shi, Cheng and Naseem, Rashid (2017) Common benchmark functions for metaheuristic evaluation: a review. International Journal on Informatics Visualization, 1 (4-2). pp. 218-223. ISSN 2549-9610

Hussain, Kashif and Mohd Salleh, Mohd Najib and Shi, Cheng and Yuhui, Shi (2018) Metaheuristic research: a comprehensive survey. Artificial Intelligence Review, 52. pp. 2191-2233. ISSN 0269-2821

Hussain, Nurul Husna Izzatti and Mustafa, Mohd Kamarulzaki and Asman, Saliza (2018) Synthesis of PANI/Iron (II, III) oxide hybrid nanocomposites using SolGel method. Journal of Science and Technology, 10 (1). pp. 1-4. ISSN 2229-8460

Hussain Shah, Syed Asim and Asman, Saliza (2023) Evaluation of deep eutectic solvent as a new monomer for molecularly imprinted polymers for removal of bisphenol A. Journal of Polymer Research. pp. 1-16.

Hussin, Mohamed Saiful Firdaus and Abdullah, Hasan Zuhudi and Idris, Maizlinda Izwana and Abdul Wahap, Mohd Arizam (2022) Extraction of natural hydroxyapatite for biomedical applications—a review. Heliyon, 8. pp. 1-11. ISSN 2405-8440

Hussin, Rosniza and Kwang, Leong Choy and Xiang, Hui Hou (2016) Growth of TiO2 thin films by Atomic Layer Deposition (ALD). Advanced Materials Research, 1133. pp. 352-356. ISSN 1022-6680

Hussin, Rosniza and Kwang, Leong Choy and Xianghui, Hou (2015) The effect of substrate on TiO2 thin films deposited by atomic layer deposition (ALD). Advanced Materials Research, 1087. pp. 147-151. ISSN 1022-6680

Huzaisham, Nur Athirah and Marsi, Noraini and Mamat, Hasri (2020) Physical Characterization of Banana (Musa Paradisiaca) Peel Derived Bioplastic. International Journal of Mechanical and Production Engineering Research and Development (IJMPERD), 10. pp. 85-96. ISSN 2249–6890

Huzaisham, Nur Athirah and Marsi, Noraini and Muhd Rus, Anika Zafiah and Masrol, Shaiful Rizal and Mahmood, Salwa and Main, Nor Mazlana and Mohd Fodzi, Muhammad Haikal and Thana Singam, Rupashinii (2020) Application of waste banana peels for wastewater treatment: a review. Journal of Computational and Theoretical Nanoscience, 17 (1). pp. 596-602. ISSN 1546-1955

Huzaisham, Nur Athirah and Nasir, Siti Hana and Mohd Idris, Muhammad Khalis (2023) Heat-setting parameters optimisation of cotton/elastane fabric using response surface methodology. Indian Journal of Fibre & Textile Research, 48. pp. 27-34.

Huzaisham, Nur Athirah and Nasir, Siti Hana and Mohd Idris, Muhammad Khalis and Rodriguez, Carolina Quintero (2023) Heat-setting parameters optimisation of cotton/elastane fabric using response surface methodology. Indian Journal of Fibre & Textile Research, 48. pp. 27-34.

Ibrahem Salih, Adnan and Abdelouhahab, Abid and A. Mostafa, Salama and Zaiter, Mohammed Joudah (2015) Updating the NCTUns-6.0 tool to simulate parallel optical burst switching of all-optical ultra-dense WDM systems. Photonic Network Communications, 29 (1). pp. 106-117. ISSN 1387-974X

Ibrahim, B. S. K. K. and M. A, N. Aziah and Ahmad, S. and R., Akmeliawati (2012) Fuzzy-based temperature and humidity control for HVAC of electric vehicle. International Symposium on Robotics and Intelligent Sensors 2012 (IRIS 2012), 41. pp. 904-910.

Ibrahim, B.S.K.K. and M. A., N. Aziah and Ahmad, S. and Akmeliawati, R. and H. M. I, Nizam and A. G. A., Muthalif and S. F., Toha and M. K., Hassan (2012) Fuzzy-based temperature and humidity control for HVAC of electric vehicle. International Symposium on Robotics and Intelligent Sensors 2012 (IRIS 2012), 41. pp. 904-910.

Ibrahim, Mohd Shukri and Kasim, Shahreen and Hassan, Rohayanti and Mahdin, Hairulnizam and Ramli, Azizul Azhar and Md Fudzee, Mohd Farhan and Salamat, Mohamad Aizi (2018) Information technology club management system. Acta Electronica Malaysia (AEM), 2 (2). pp. 1-5. ISSN 2590-4043

Ibrahim, Nabilah and Abd Aziz, Nur Shazilah and Abd Manap, Abreeza Noorlina (2017) Vein mechanism simulation study for deep vein thrombosis early diagnosis using CFD. Journal of Physics, 822 (1). pp. 1-6. ISSN 8220-12040

Ibrahim, Noraini and Ibrahim, Rosziati and Saringat, Mohd Zainuri and Mansor, Dzahar and Herawan, Tutut (2011) Consistency rules between UML use case and activity diagrams using logical approach. International Journal of Software Engineering and Its Applications, 5 (3). pp. 119-134.

Ibrahim, Rosziati and Teoh, Suk Kuan (2011) Steganography algorithm to hide secret message inside an image. Computer Technology and Application, 2. pp. 102-108.

Ibrahim, Siti Aida and Zainal Alam, Abdul Hadi and Hussin, Rosniza and Kamdi, Zakiah and Mohamed Hatta, Mohamed Nasrul and Ainuddin, Ainun Rahmahwati and Yunos, Muhamad Zaini (2018) Effect of calcination temperature on (N, Fe) doped TiO2 nanoparticles. Journal of Science and Technology, 10 (2). pp. 44-48. ISSN 2600-7924

Idris, Maizlinda Izwana and Jan, Zaloga and Detsch, Rainer and Roether, Judith A. and Unterweger, Harald and Alexiou, Christoph and Boccaccini, Aldo R. (2018) Surface modifcation of SPIONs in PHBV microspheres for biomedical applications. Scientific Reports, 8 (7286). pp. 1-11. ISSN 2045-2322

Idris, Mohd Yaman and Ahmad, Hajar Fauzan and Hashim, Ridzwan and Usup, Gires and Mohamed Rehan, Aisyah and Kamarudin, Kamarul Rahim (2011) Phylogeny of holothuria leucospilota (echinodermata: holothuroidea) as inferred from cytochrome c oxidase i mtDNA gene sequences. Borneo J. Resour. Sci. Tech., 1. pp. 52-54.

Idris, Nur’Ain and Asai, Mitsuteru and Mohd Noh, Hamidun (2023) An Improvement in Boundary Treatment of Solid Boundary Using ISPH Approach. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 103 (1). pp. 211-222. ISSN : 2289-7879

Idris, Nur’Ain and Mohd Noh, Hamidun and Mohamad, Nor Lailatul Izzatil Azwani and Bangau, Rolly (2020) Reinforced concrete by using the rectangular shape of voided beam. Journal of Mechanical Engineering, SI 9 (1). pp. 179-190. ISSN 1823-5514

Ihsan Salman, Ihsan Salman and Khalid Mohammed Saffer, Khalid Mohammed Saffer and Hayder H. Safi, Salama A. Mostafa, Hayder H. Safi, Salama A. Mostafa and Bashar Ahmad Khalaf, Bashar Ahmad Khalaf (2023) Salp swarm and gray wolf optimizer for improving the efficiency of power supply network in radial distribution systems. Journal of Intelligent Systems. pp. 1-12.

Ihsan Salman,, Ihsan Salman, and Khalid Mohammed Saffer, Khalid Mohammed Saffer and Hayder H. Saf, Hayder H. Saf and Salama A. Mostafa, Salama A. Mostafa and Bashar Ahmad Khalaf, Bashar Ahmad Khalaf (2023) Salp swarm and gray wolf optimizer for improving the efficiency of power supply network in radial distribution systems. Salp swarm and gray wolf optimizer. pp. 1-12.

Ilias, Juliana and Kasim, Shahreen and Hassan, Rohayanti and Mahdin, Hairulnizam and Ramli, Azizul Azhar and Md Fudzee, Mohd Farhan and Salamat, Mohamad Aizi (2018) At-thoyyib shop inventory management system. Acta Electronica Malaysia (AEM), 2 (2). pp. 12-16. ISSN 2521-0505

Iman, Muhammad Izzat and Ahmad, Noor Aliza (2022) A performance review of grass swales channel in Malaysia. Recent Trends in Civil Engineering and Built Environment, 3 (1). pp. 663-671.

Imdad, Maria and Jacob, Deden Witarsyah and Mahdin, Hairulnizam and Baharum, Zirawani and Shaharudin, Shazlyn Milleana and Azmi, Mohd Sanusi (2020) Internet of things (IoT); security requirements, attacks and counter measures. Indonesian Journal of Electrical Engineering and Computer Science, 18 (3). pp. 1520-1530. ISSN 2502-4752

Imran, H. and Zulfadhli, S.M. and Qibtiah, Raja Mariatul and Rani, Ridhwan and Azraai, Munirah Ahmad (2020) Intelligent system of duo functional bagpack. REVIEW OF INTERNATIONAL GEOGRAPHICAL EDUCATION, 11 (7). pp. 569-581. ISSN 2146-0353

Indah Hairunisa, Indah Hairunisa and Abu Bakar, Mohd Fadzelly and Muhammad Da’, Muhammad Da’ and Abu Bakar, Fazleen Izzany and Eka Siswanto Syamsul, Eka Siswanto Syamsul (2023) Cytotoxic Activity, Anti-Migration and In Silico Study of Black Ginger (Kaempferia parviflora) Extract against Breast Cancer Cell. Cancers, 15 (2785). pp. 1-16.

Ioan Pop, Ioan Pop and Ishak, Anuar and Aman, Fazlina (2011) Radiation effects on the MHD flow near the stagnation point of a stretching sheet: revisited. Z. Angew. Math. Phys., 62. pp. 953-956.

Iqbal, Younas and Mustafa, M.K. and Muhammad Rosdi, N.L. (2016) Effect of orientation and configuration of ZnO nanorods on electrical conductivity prepared through hydrothermal method on suspended substrate. Journal of Science and Technology, 8 (2). pp. 14-17. ISSN 2229-8460

Isa, K and W.H.N, Wan Muda and Halim, F and Ismail, N (2023) A Strategies of Success Virtual Mobility for Technical Students. Social Sciences Journal, 13. pp. 3274-3283.

Isa, Khairunesa and Latiff, Azmi Abdul (2020) Internet browsing trends among Malaysians during movement control order (MCO) period. International Journal of Emerging Technologies in Engineering Research (IJETER), 8 (4). pp. 1-8. ISSN 2454-6410

Isa, Khairunesa and Noh, Mohamad Zaky and Johar, Siti Sarawati and Md Yusoff, Rosman and Ahmad, Abd Rahman (2018) UCE program and 3D students development. International Journal of Engineering & Technology, 7 (2.29). pp. 685-688. ISSN 0222-7524

Isa Harir, Adamu and Kasim, Rozilah (2017) Integrated waste recycling framework for municipal solid waste generated (MSWG) in Bauchi Metropolis, Nigeria. Journal of Applied Sciences & Environmental Sustainability, 3 (7). pp. 57-67. ISSN 2360-8013

Isa, K, Isa, K and Wan Muda W.H.N, Wan Muda W.H.N and Halim, F, Halim, F and Ismail, N, Ismail, N (2023) A Strategies of Success Virtual Mobility for Technical Students. Social Sciene Journal, 13. pp. 3274-3283.

Ishfaq, Rahila and Ruslan, Nurun Najwa and Attan, Nursyafreena and Jikan, Suzi Salwah and Ameruddin, Amira Saryati (2022) Synthesis and characterization of metal sulfates loaded Palm Empty Fruit Bunch (PEFB) for biodiesel production. Sains Malaysiana, 51 (2). pp. 519-532.

Ismail, Al Emran and Ahmad Kamal Ariffin, Ahmad Kamal Ariffin and Abdullah, Shahrum and Ghazali, Mariyam Jameelah and Abdulrazzaq, Mohammed and Daud, Ruslizam (2012) Stress intensity factors under combined bending and torsion moments. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 13 (1). pp. 1-8. ISSN 1673-565X

Ismail, Hassan and Akasah, Zainal Abidin and Nagapan, Sasitharan and Khamis, Azme (2018) An investigation on benefits and future expectation of Industrialised Building System (IBS) implementation in construction practices. Advanced Journal of Technical and Vocational Education, 2 (2). pp. 12-18. ISSN 2550-2174

Ismail, Lindawati and Ghazali, Mohd. Imran and Mahzan, Shahruddin and Ahmad Zaidi, Ahmad Mujahid (2010) Sound absorption of arenga pinnata natural fiber. World Academy of Science, Engineering and Technology, 4 (7). pp. 804-806.

Ismail, Mohd Arfian and Ab Razak, Kirahman and Kohbalan, Moorthy and Mezhuyev, Vitaliy and Kasim, Shahreen and Ibrahim, Ashraf Osman (2018) Newton competitive genetic algorithm method for optimization the production of biochemical systems. Advanced Science Letters, 24 (10). pp. 7481-7485. ISSN 1936-6612

Ismail, Mohd Erfy and Hamzah, Norhasyimah and Ariffin, Arihasnida and Ismail, Irwan Mahazir and Mat Daud, Khairul Azhar and Utami, Pipit and Khairudin, Moh. (2018) The acceptance of MOOC among TVET students in higher education: an observation. Jurnal Pendidikan Teknologi dan Kejuruan, 15 (2). pp. 213-221. ISSN 2541-0652

Ismail, Mohd Erfy and Razali, Nizamuddin and Hashim, Suhaizal and Masek, Alias and Ismail, Irwan Mahazir (2022) Design and analysis of flour sieving machine prototype using autodesk inventor. Journal of Positive School Psychology, 6 (2). pp. 2625-2631.

Ismail, Mohd Erfy and Zakaria, Anies Faziehan and Ismail, Irwan Mahazir and Othman, Hasyamuddin and Samsudin, Mohd Ali and Utami, Pipit (2019) Design and development of augmented reality teaching kit: in TVET learning context. International Journal of Engineering and Technology, 8 (1.1). pp. 129-134. ISSN 2227-524X

Ismail, Mohd Norasri and Ibrahim, Rosziati and Md. Fudzee, Mohd Farhan and Jofri, Muhammad Hanif (2015) SLA-based content adaptation framework for optimizing QoE and energy consumption. ARPN Journal of Engineering and Applied Sciences, 10 (2). pp. 643-651. ISSN 1819-6608

Ismail, Muammar Mukhsin and Mohd Ali, Mas Fawzi and Zulkifli, Fathul Hakim and Osman, Shahrul Azmir (2018) Cng-diesel dual fuel controlling concept for common rail diesel. International Journal of Integrated Engineering: Special Issue, 10 (3). pp. 88-92. ISSN 2229-838X

Ismail, Muhammad Arif and Rosly, Nurhayati (2019) Mechanical design study of drive mechanism of initial study of drag characteristics of the drogue parachute on leatjet 24D. Journal of Aviation and Aerospace Technology, 1 (1). pp. 1-6. ISSN 2682-7433

Ismail, Noorsyahira and Kasim, Shahreen and Jusoh, Yusmadi Yah and Hassan, Rohayanti and Alyani, Ayu (2018) Medical appointment application. Acta Electronica Malaysia (AEM), 1 (2). pp. 5-9. ISSN 2590-4043

Ismail, Nurul Izzatty and Abdullah, Nor Hazana (2018) Malaysia health information exchange: a systematic review. Malaysia Health Information Exchange: A systematic review, 13 (5). pp. 706-721. ISSN 1804-5006

Ismail, Nurul Izzatty and Abdullah, Nor Hazana (2018) A systematic review of patient satisfaction on health information exchange in Malaysian Public Healthcare Organizations. International PostGraduate Conference on Applied Science & Physics, 1049. pp. 1-8. ISSN 1755-1315

J., Jumintono and S., Alkubaisy and D., Yánez Silva and K., Singh and A., Turki Jali and S., Mutia Syarifah and Y., Fakri Mustafa and I., Mikolaychik and L., Morozova and M., Derkho (2021) Effect of cystamine on sperm and antioxidant parameters of ram semen stored at 4 °C for 50 hours. Archives of Razi Institute, 76 (4). pp. 1115-1123.

J., Kavikumar and D., Nagarajan and Said, Broumi and F., Smarandache and M., Lathamaheswari and Ebas, Nur Ain (2019) Neutrosophic general finite automata. Neutrosophic Sets and Systems.

J. Alipal, J. Alipal and S. Saidin, S. Saidin and A.Z. Kai Lo, A.Z. Kai Lo and P. Koshy, P. Koshy and H.Z. Abdullah, H.Z. Abdullah and M.I. Idris, M.I. Idris and T.C. Lee, T.C. Lee (2023) In vitro surface efficacy of CaP-based anodised titanium for bone implants. Surfaces and Interfaces, 39. pp. 1-21.

JUBAIR, MOHAMMED AHMED and A. MOSTAFA, SALAMA and DZEBARI, DILOVAN ASAAD and MUHEE HARIZ, HUSSEIN and ABDULSATTAR, NEJOOD FAISAL and HASSAN, MUSTAFA HAMID and ABBAS, ALI HASHIM and HASHIM ABBAS, FATIMA and ALASIRY, AREEJ and ALOUANE, M. TURKI-HADJ (2023) A QoS Aware Cluster Head Selection and Hybrid Cryptography Routing Protocol for Enhancing Efficiency and Security of VANETs. Digital Object Identifier, 10.

JUBAIR, MOHAMMED AHMED and Mostafa, Salama A. and ZEBARI, DILOVAN ASAAD and HARIZ, HUSSEIN MUHEE and ABDULSATTAR, NEJOOD FAISAL and HASSAN, MUSTAFA HAMID and ABBAS, ALI HASHIM and ABBAS, FATIMA HASHIM and ALASIRY, AREEJ and ALOUANE, M. TURKI-HADJ (2022) A QoS Aware Cluster Head Selection and Hybrid Cryptography Routing Protocol for Enhancing Efficiency and Security of VANET. Digital Object Identifier. pp. 1-13. ISSN 3224466 (Unpublished)

Jaafar, Jamiluddin and Siregar, Januar Parlaungan and Mohd Salleh, Salwani and Mohd Hamdan, Mohd Hazim and Cionita, Tezara and Rihayat, Teuku (2019) Important considerations in manufacturing of natural fiber composites: a review. International Journal of Precision Engineering and Manufacturing-Green Technology, 6. pp. 647-664. ISSN 2288-6206

Jaafar, Jamiluddin and Siregar, Januar Parlaungan and Tezara, Cionita and Mohamad Hamdan, Mohammad Hazim and Rihayat, Teuku (2019) A review of important considerations in the compression molding process of short natural fiber composites. The International Journal of Advanced Manufacturing Technology, 105. pp. 3437-3450. ISSN 0268-3768

Jaat, Norrizam and Khalid, Amir and Andsaler, Adiba Rhaodah and Sapit, Azwan and Razali, Azahari and Basharie, Mariam (2017) Effects of ambient temperature and injection pressure on biodiesel ignition delay. Journal of Mechanical Engineering and Sciences, 11 (2). pp. 2723-2733. ISSN 2289-4659

Jacob, Deden Witarsyah and Abd Alkhalec Tharwat, Muhammed.E and Md Fudzee, Mohd Farhan and Ramli, Azizul Azhar and Kasim, Shahreen and Lubis, Muharman (2023) Analysis of How Scalable Features in Hadoop/MapReduce by Internet Traffic Management. Internatiol Journal Advanced Sciece Engeneering Information Technology, 13 (1). pp. 365-370. ISSN 2088-5334

Jaffar, Muhammad Ismail and Hamid, Hazrul Abdul and Yunus, Riduan and Raffee, Ahmad Fauzi (2018) Fitting statistical distribution on air pollution: an overview. International Journal of Engineering and Technology, 7 (3.23). pp. 40-44. ISSN 2227-524X

Jailani, R. and Tokhi, M. O. and Gharoonia, S. C. and Ibrahim, B. S. K. (2011) FES-assisted walking with spring brake orthosis: simulation studies. Applied Bionics and Biomechanics, 8. pp. 115-126.

Jaini, Nur ‘Afiqah and Wan Yusoff, Wan Zahari and Ishak, Mohd Hafizal and Sulaiman, Muhammad Azwan (2022) Penyelenggaraan bangunan dalam pengurusan fasiliti: elemen mempengaruhi kualiti amalan penyelenggaraan bangunan. Journal of Social Transformation and Regional Development, 4 (1). pp. 18-26.

Jalim, Mohammad Idham and Abdul Razzaq, Abdul Rasid and Syed A. Kadir, Syed Shikh and Jumintono, Jumintono (2021) Self-image, career development and job choice on tourism industry in Malaysia: a perception of students. Educational Administration: Theory and Practice, 27 (4). pp. 1197-1203.

Jamahuri, Nadira and A. Khalifa, Nasradeen (2022) Plastic as the fill-in material for pothole repairing. Recent Trends in Civil Engineering and Built Environment, 3 (1). pp. 1029-1038.

Jamaian, Siti S. and Mackay, Tom G. (2010) On limitations of the Bruggeman formalism for inverse homogenization. Journal of Nanophotonics, 4. pp. 1-8.

Jamalludin, Mohd Riduan and Harun, Zawati and Othman, Mohd Hafiz Dzarfan and Hubadillah, Siti Khadijah and Yunos, Muhamad Zaini and Ismail, Ahmad Fauzi (2018) Morphology and property study of green ceramic hollow fiber membrane derived from waste sugarcane bagasse ash (WSBA). Ceramics International, 44 (15). pp. 18450-18461. ISSN 0272-8842

Jamaluddin, Norwati and Yeoh, David and Abdul Ghani, Abdul Halim and Koh, Heng Boon and Shah Ayob, Sallehudin and Wan Ibrahim, Mohd Haziman and Mohamad, Noridah and Tuan Chik, Tuan Norhayati and Abd. Ghafar, Nor Hayati (2018) A case study of residential buildings subjected to cracking failures. International Journal of Integrated Engineering, 10 (2). pp. 118-122. ISSN 2229-838X

Jamaludin, J. and Zakaria, Z. and Awang, N.A. (2017) Multiwavelength ﬁber laser in four mode ﬁber. Optik, 142. pp. 615-620. ISSN 0030-4026

Jameel, Muhammad Hasnain and Agam, Mohd Arif and Roslan, Muhammad Sufi and Jabbar, Abdullah Hasan and Malik, Rami Qays and Islam, Muhammad Usama and Raza, Ali and Subhani, Rasheed Ahmad (2023) A comparative DFT study of electronic and optical properties of Pb/ Cd-doped LaVO4 and Pb/Cd-LuVO4 for electronic device applications. Computational Condensed Matter, 34. pp. 1-12.

Jameel, Muhammad Hasnain and Agam, Mohd Arif and Roslan, Muhammad Sufi and Jabbar, Abdullah Hasan and Rami Qays Malik, Rami Qays Malik and Islam, Muhammad Usama and Ali Raza, Ali Raza and Rasheed Ahmad Subhani, Rasheed Ahmad Subhani (2023) A comparative DFT study of electronic and optical properties of Pb/ Cd-doped LaVO4 and Pb/Cd-LuVO4 for electronic device applications. Computational Condensed Matter, 34. pp. 1-12.

Jameel, Muhammad Hasnain and Rehman, Azka Rehman and Roslan, Muhammad Sufi and Agam, Mohd Arif (2023) To investigate the structural, electronic, optical and magnetic properties of Sr-doped KNbO3 for perovskite solar cell applications: A DFT study. phycisa scripta, 98. pp. 1-12.

Jamellodin, Zalipah and Jamaly, Mohamad Arif and Nor Azhar, Norazreen and A. Majid, Masni and Salleh, Norhafizah and Abdul Hamid, Noor Azlina and Adnan, Suraya Hani (2018) Binary effect of palm oil fuel ash and eggshell waste powder on heat of hydration for mortar. International Journal of Engineering and Technology, 7 (4.22). pp. 27-30. ISSN 2227-524X

Jamellodin, Zalipah and Mohd Saman, Hamidah and Adnan, Suraya Hani and A. Khalid, Nur Hafizah and Abdul Hamid, Noor Azlina and A. Majid, Masni and Salleh, Norhafizah (2018) Flexural behaviour of plain concrete prism strengthened by textile fine grained mortar. Advanced Science Letters, 24 (6). pp. 3982-3985. ISSN 1936-6612

Jamellodin, Zalipah and Nor Azhar, Norazreen and Jamaly, Mohamad Arif and A. Majid, Masni and Salleh, Norhafizah and Abdul Hamid, Noor Azlina and Ismail, Noorli and Adnan, Suraya Hani Adnan and Abdul Rashid, Nur Nadhirah (2018) Strength of blended cement mortar containing palm oil fuel and eggshell ashes. International Journal of Engineering & Technology, 7 (3.7). pp. 598-600. ISSN 2227-524X

Jamian, Saifulnizan and Watanabe, Yoshimi and Sato, Hisashi (2019) Formation of compositional gradient in Al/SiC FGMs fabricated under huge centrifugal forces using solid-particle and mixed-powder methods. Ceramics International, 45. pp. 9444-9453. ISSN 0272-8842

Jamiluddin, J. and Siregar, J. P. and Sulaiman, A. H. and A. Jalal, K. A. and Tezara, C. (2016) Study on properties of tapioca resin polymer. International Journal of Automotive and Mechanical Engineering (IJAME), 13 (1). pp. 3178-3189. ISSN 2229-8649

Janis, Ilyana and Alias, Maizam and Zulkipli, Muhammad and Muhammad-Sukki, Firdaus (2020) Using illustrations to make decisions on the most appropriate qualitative research methodology: the industry 4.0 scenario. International Journal of Qualitative Methods, 19. pp. 1-16. ISSN 1609-4069

Janis, Ilyana and Paimin, Aini Nazura and Alias, Maizam (2021) Exploring the theoretical gap on knowledge work of knowledge and skilled worker in TVET practices : a literature review. Journal of Technical Education and Training, 13 (4). pp. 92-105. ISSN 2229-8932

Jatmoko, Dwi and Suyitno, Suyitno and Rasul, Mohamad Sattar and Nurtanto, Muhammad and Nur Kholifah, Nur Kholifah and Masek, Alias and Nur, Hamid Ramadhan (2023) The Factors Influencing Digital Literacy Practice in Vocational Education:A Structural Equation Modeling Approach. European Journal of Educational Research, 12 (2). pp. 1101-1121. ISSN 2165-8714

Javid, Irfan and Ghazali, Rozaida and Muhammad Zulqarnain, Muhammad Zulqarnain and Hassan, Norlida (2023) Data pre-processing for cardiovascular disease classification: A systematic literature review. Journal of Intelligent & Fuzzy Systems, 44. pp. 1525-1545.

Jia, Heng Ong and Pauline Ong, Pauline Ong and Woon, Kiow Lee (2022) Image-based oil palm leaf disease detection using convolutional neural network. Journal of Information and Communication Technology (JICT), 21 (3). pp. 383-410. ISSN 1675-414X

Jia Xin Chan, Jia Xin Chan and Joon Fatt Wong, Joon Fatt Wong and Azman Hassan, Azman Hassan and Othman, Norhayani and Abd Razak, Jeefferie and Umar Nirmal, Umar Nirmal and Hashim, Shahrir and Yern Chee Ching, Yern Chee Ching and Yunos, Muhamad Zaini and Yahaya, Ridwan and T. M. Sampath U. Gunathilake, T. M. Sampath U. Gunathilake (2023) Mechanical, thermal, tribological, and flammability properties of polybutylene terephthalate composites: Comparing the effects of synthetic wollastonite nanofibers, natural wollastonite, and graphene oxide. Applied Polymer. pp. 1-17.

Jia Xin Chan, Jia Xin Chan and Joon Fatt Wong, Joon Fatt Wong and Hassan, Azman and Othman, Norhayani and Abd Razak, Jeefferie and Nirma, Umar and Hashim, Shahrir and Yern Chee Ching, Yern Chee Ching and Yunos, Muhamad Zaini and Yahaya, Ridwan and T. M. Sampath U. Gunathilake, T. M. Sampath U. Gunathilake (2022) Mechanical, thermal, tribological, and flammability properties of polybutylene terephthalate composites: Comparing the effects of synthetic wollastonite nanofibers, natural wollastonite, and graphene oxide. Applied Polymer. pp. 1-17.

Jia Xin Chan, Jia Xin Chan and Joon Fatt Wong, Joon Fatt Wong and Hassan, Azman and Othman, Norhayani and Abd Razak, Jeefferie and Nirmal, Umar and Hashim, Shahrir and Yern Chee Ching, Yern Chee Ching and Zaini Yunos, Muhamad and Yahaya, Ridwan and U. Gunathilake, T. M. Sampath (2023) Mechanical, thermal, tribological, and flammability properties of polybutylene terephthalate composites: Comparing the effects of synthetic wollastonite nanofibers, natural wollastonite, and graphene oxide. Applied Polymer. pp. 1-17.

Jingye Yee, Jingye Yee and Cheng Yee Low, Cheng Yee Low and Mohamad Hashim, Natiara and Che Zakaria, Noor Ayuni and Johar, Khairunnisa and Othman, Nurul Atiqah and Hock Hung Chieng, Hock Hung Chieng and Hanapiah, Fazah Akhtar (2023) Clinical Spasticity Assessment Assisted by Machine Learning Methods and Rule-Based Decision. Diagnostics. pp. 1-31.

Joel, E.S. and Maxwell, O. and Adewoyin, O.O and Ehi-Eromosele, C.O and Embong, Z. and Saeed, M.A (2018) Assessment of natural radionuclides and its radiological hazards from tiles made in Nigeria. Radiation Physics and Chemistry, 114. pp. 43-47. ISSN 0969-806X

Joel, E.S. and Maxwell, O. and Adewoyin, O.O. and Ehi-Eromosele, C.O and Embong, Z. and Oyawoye, F. (2018) Assessment of natural radioactivity in various commercial tiles used for building purposes in Nigeria. MethodsX, 5. pp. 8-19. ISSN 2215-0161

Joha, Anis and Hassan, Sallaudin and Shamsudin, Mohd. Farid and Hasim, Muhammad Asyraf (2022) Purchasing Behaviour among Small Medium Enterprise (SME) customer during Covid-19 Pandemic using 7Ps approach. Journal of Positive School Psychology, 6 (3). pp. 529-539.

Johar, Siti Hajar and Abdullah, Nurhanim Saadah (2018) A concept of augmented reality module for electronic subject. Online Journal for TVET Practitioners (OJ-TP), 1 (1). ISSN 2289-7410

Johar, Siti Sarawati (2018) Human governance: The art of emotional intelligence of leader through the model of spirituality. International Journal of Engineering & Technology, 7 (2.29). pp. 383-388. ISSN 2227-524X

Johar, Siti Sarawati (2012) The influence of emotional intelligence and self-esteem among employee towards organizational commitment in public sector. Global Journal of Management and Business Research Administration and Management, 14 (1). ISSN 2249-4588

Johar, Siti Sarawati and Ibrahim, Nesreen Awada and Isa, Khairunesa (2020) Emotional intelligence impact on organizational normative commitment in public sector. International Journal of Advance Science and Technology, 29 (10S). pp. 890-895. ISSN 2005-4238

Johar, Siti Sarawati and Mad Shah, Ishak and Abu Bakar, Zainudin (2012) The impact of emotional intelligence towards relationship of personality and self-esteem at workplace. Procedia - Social and Behavioral Sciences, 65. pp. 150-155. ISSN 1877-0428

Jol, P. Jose and Amin, A. M. and Ibrahim, M. H. I. and Zhong, Z.W. and Shamsudin, S. (2020) Debinding process of ss316L metal injection moulding under argon atmosphere. Journal of Advanced Manufacturing Technology, 14 (2). ISSN 1985-3157

Jong, Siat Ling and Lam, Hong Yin and D’Amico, M. and Cuervo, F. and Yunus, M. M. and Din, J. (2017) Impact of link elevation angles on rain attenuation statistics in heavy rain region predicted using the synthetic storm technique. Journal of Telecommunication Electronic and Computer Engineering, 9 (3-8). pp. 17-20. ISSN 2180-1843

Joseph Charles Vinoth, Joseph Charles Vinoth and Ramesh, Subramaniam and Z. Abidin, Zuhairiah and Qureshi2, Suhail A. and Chitra, Sivathanu and Saranya, Elumalai and Josephine, Messiah and Sneha, Ganesan (2023) Planar Edged UWB Antenna for Water Quality Measurement. Progress In Electromagnetics Research C, 130. pp. 83-93.

Joseph Charles Vinoth, Joseph Charles Vinoth and Subramaniam Ramesh, Subramaniam Ramesh and Z. Abidin, Zuhairiah and Suhail A. Qureshi, Suhail A. Qureshi and Sivathanu Chitra, Sivathanu Chitra and Elumalai Saranya, Elumalai Saranya and Messiah Josephine, Messiah Josephine and Ganesan Sneha, Ganesan Sneha (2023) Planar Edged UWB Antenna for Water Quality Measurement. Progress In Electromagnetics, 130. pp. 83-93.

Joseph Charles Vinoth, Joseph Charles Vinoth and Subramaniam Ramesh, Subramaniam Ramesh and Zuhairiah Z. Abidin, Zuhairiah Z. Abidin and Suhail A. Qureshi, Suhail A. Qureshi and Sivathanu Chitra, Sivathanu Chitra and Elumalai Saranya, Elumalai Saranya (2023) Planar Edged UWB Antenna for Water Quality Measurement. Progress In Electromagnetics Research, 130. pp. 83-93.

Jubair, Mohammed Ahmed and A. Mostaf, Salama and Mustapha, Aida and Salamat, Mohamad Aizi and Hassan, Mustafa Hamid and Mohammed, Mazin Abed and AL-Dhief, Fahad Taha (2023) A multi-agent K-means with case-based reasoning for an automated quality assessment of software requirement specification. IET Communications. pp. 1-17.

Jubair, Mohammed Ahmed and A. Mostafa, Salama and Mustapha, Aida and Salamat, Mohamad Aizi and Hassan, Mustafa Hamid and Mohammed, Mazin Abed and AL-Dhief, Fahad Taha (2023) A multi-agent K-means with case-based reasoning for an automated quality assessment of software requirement specification. IET Communications. pp. 1-17.

Jubair, Mohammed Ahmed and Mostafa2, Salama A. and Mustapha, Aida and Salamat, Mohamad Aizi and Hassan, Mustafa Hamid and Mohammed, Mazin Abed and Taha AL-Dhief, Fahad (2022) A multi-agent K-means with case-based reasoning for an automated quality assessment of software requirement specification. IET Communications. pp. 1-17.

Juki, Mohd Irwan and Teddy, T. (2017) An overview of bacterial concrete on concrete durability in aggressive environment. Pertanika Journal: Science and Technology, 25 (NIL). pp. 259-264. ISSN 0128-7680

Jumintono, Jumintono and Devi, Fransiska Sinta and Emmy Hamidah, Emmy Hamidah and Wahyu Santoso, Wahyu Santoso (2021) Easily understanding on post-harvest handling subject through video-based learning: a study on Agriculture Students at UiTM Melaka, Malaysia. Educational Administration: Theory and Practice, 27 (4). pp. 1190-1196.

K. Ibrahim, B. S. K. and Tokhi, M. O. and Huq, M. S. and Jailani, R. and Gharooni, S. C. (2011) Fuzzy modelling of knee joint with genetic optimization. Applied Bionics and Biomechanics, 8. pp. 85-99.

KHASNIMAN, FATIN NURFAZIRA and ABAS, NOR HASLINDA and ISMAIL, SUSHILAWATI and RAHMAT, MUHAMAD HANAFI and HASMOR, MUHAMMAD FIKRI (2023) OCCUPATIONAL SAFETY AND HEALTH (OSH) MANAGEMENT PRACTICES OF BUILDING CONTRACTORS IN JOHOR, MALAYSIA. Journal of Sustainability Science and Management, 18 (2). pp. 116-125. ISSN 2672-7226

KHASNIMAN, FATIN NURFAZIRA and ABAS, NOR HASLINDA and ISMAIL, SUSHILAWATI and RAHMAT, MUHAMAD HANAFI and HASMORI, MUHAMMAD FIKRI (2023) OCCUPATIONAL SAFETY AND HEALTH (OSH) MANAGEMENT PRACTICES OF BUILDING CONTRACTORS IN JOHOR, MALAYSIA. Journal of Sustainability Science and Management, 18 (2). pp. 116-125. ISSN 2672-7226

Kabir Momoh, Kabir Momoh and Zulkifli, Shamsul Aizam and Petr Korba, Petr Korba and Felix Rafael Segundo Sevilla, Felix Rafael Segundo Sevilla and Nur Afandi, Arif and Alfredo Velazquez-Ibañez, Alfredo Velazquez-Ibañez (2023) State-of-the-Art Grid Stability Improvement Techniques for Electric Vehicle Fast-Charging Stations for Future Outlooks. Energies, 16 (3956). pp. 1-29.

Kaliannan, Suaathi and Nagapan, Sasitharan and Abdullah, Abd Halid and Sohu, Samiullah and Ahmed Jhatial, Ashfaque (2018) Determining root cause of construction waste generation: a global context. Civil Engineering Journal, 4 (11). pp. 2539-2547. ISSN 2476-3055

Kaliappan, Anusuya and Hamid, Hashima and Madar, Ahmad Rizal (2023) Experts' Opinion Matters! Green Technology Elements for Construction Technology in Vocational Colleges. JOURNAL OF TECHN[CAL EDUCATION AND TRAINING, 15 (1). pp. 167-177. ISSN 2229-8932

Kaliappan, Anusuya and Hamid, Hashima and Madarl, Ahmad Rizal (2023) Experts' Opinion Matters! Green Technology Elements for- Construction Technology in Vocational Colleges. JOHN.ML OF TECHNJC.W EDOC.ATION .14W THING, 15 (1). pp. 167-177. ISSN 2229-8932

Kamaludin, Hazalila and Mahdin, Hairulnizam and H. Abawajy, Jemal (2015) Filtering redundant data from RFID data streams. Journal of Sensors, 11 (1). pp. 1-7. ISSN 1687725X

Kamardan, M.Ghazali and A. Zaidi, N. Hidayah and Dalimin, M. Noh and A. Zaidi, A. Mujahid and Jamaludin, S. Bahrin and A.Jamil, M.Mahadi (2010) The sintering temperature effect on the shrinkage behavior of cobalt chromium alloy. American Journal of Applied Sciences, 7 (11). pp. 1443-148.

Kamaril Yusoff, Mohd Ashiq and Samin, Reza Ezuan and Ibrahim, Babul Salam Kader (2012) Wireless mobile robotic arm. International Symposium on Robotics and Intelligent Sensors 2012 (IRIS 2012), 41. pp. 1072-1078.

Kamaruddin, Sufian and Wan, Inn Goh and Ahmed Jhatial, Ashfaque and Tahir Lakhiar, Muhammad (2018) Chemical and fresh state properties of foamed concrete incorporating palm oil fuel ash and eggshell ash as cement replacement. International Journal of Engineering & Technology, 7 (4.3). pp. 350-354. ISSN 2227-524X

Kamarudin, K. R. and Rehan, A. M. and Hashim, R. and Usup, G. (2010) An update on diversity of sea cucumbers (echinodermata: holothuroidea) in Malaysia. Malayan Nature Journal, 62 (3). pp. 315-334. ISSN 00251291

Kamarudin, Kamarul Rahim and Hashim, Ridzwan and Usup, Gires (2010) Phylogeny of sea cucumber (echinodermata: holothuroidea) as inferred from 16s mitochondrial rRNa gene sequences. Sains Malaysiana, 39 (2). pp. 209-218.

Kamarudin, Kamarul Rahim and Mohamed Rehan, Aisyah Mohamed Rehan and Hashim, Ridzwan and Usup, Gires and Ahmad, Hajar Fauzan and Anua, Mohd Hanafi and Idris, Mohd Yaman (2011) Molecular phylogeny of holothuria (mertensiothuria) leucospilota (Brandt 1835) as inferred from cytochrome c oxidase i mitochondrial dna gene sequences. Sains Malaysiana, 40 (2). pp. 125-133.

Kamarudin, Kamarul Rahim and Mohamed Rehan, Maryam (2015) Morphological and molecular identification of Holothuria (Merthensiothuria) leucospilota and Stichopus horrens from Pangkor Island, Malaysia. Tropical Life Sciences Research, 26 (1). pp. 87-99. ISSN 1985-3718

Kamaruzaman, Nur Hazirah and Mohd Noor, Nur Nabilah and Radin Mohamed, Radin Maya Saphira and Al-Gheethi, Adel and Ponnusamy, Senthil Kumar and Sharma, Ajit and N. Vo, Dai-Viet (2022) Applicability of bio-synthesized nanoparticles in fungal secondary metabolites products and plant extracts for eliminating antibiotic-resistant bacteria risks in non-clinical environments. Environmental Research, 209. pp. 1-17.

Kamdi, Z. and Shipway, P. H. and Voisey, K. T. (2013) Micro-scale abrasion of WC-based coatings with different abrasive type. Applied Mechanics and Materials, 465 (466). pp. 65-69. ISSN 1660-9336

Kamdi, Zakiah and Badarulzaman, Nur Azam and Sukkeri, Muhammad Adeeb Reezan and Hassan, Muhammad Syafiq and Mohamed Hatta, Mohamed Nasrul and Ainuddin, Ainun Rahmahwati (2018) Evaluation of corrosion and wear behaviour of nickel tungsten carbide electrodeposited with different tungsten carbide concentration and current density. Journal of Science and Technology, 10 (2). pp. 38-43. ISSN 2600-7924

Kareem, A K and Fakhri, O M and Ismail, A E and Taib, Ishkrizat and Nemah, Mohammed Najeh (2019) Mechanisms and treatment of femoropoplitealin-stent restenosis. Test Engineering & Management, 81 (11-12). pp. 704-718. ISSN 0193-4120

Kasim, Rozilah and Al Meqbaali, Salem R. (2018) Overview of the operational service quality in UAE Government. Journal of Techno Social, 9 (2). pp. 71-78. ISSN 2229-8940

Kasim, Rozilah and Umar, Muhammad Akilu and Ishak, Mohd Hafizal and Ariffin, Khadijah Md (2018) Framework development to identify the impact of green building attributes on rental value of commercial properties in Malaysia. Advanced Science Letters, 24 (5). pp. 3229-3233. ISSN 1936-6612

Kasim, Rozilah and Umar, Muhammad Akilu and Martin, David (2018) Social factor as an indicator for service excellence in facilities management services. Journal of Advanced Research in Dynamical and Control Systems, 10 (6). pp. 294-303. ISSN 1943-023X

Kasiran, A. N. and Ponniran, A. and Harimon, M. A. and Hamzah, H. H. (2018) A study of 4-level DC-DC boost inverter with passive, component reduction consideration. Journal of Physics: Conference Series, 995. pp. 1-9. ISSN 1742-6588

Kassim, Noordiana and Yusof, Yusri and Mohamad, Mahmod Abd Hakim and Janon, Mohd Najib and Mohd Hanifa, Rafizah (2013) Development of STEP-NC based machining system for machining process information flow. Applied Mechanics and Materials, 315 (NIL). pp. 278-282. ISSN 1660-9336

Kassim, Rahimah and Abdul Hamid, Nor Aziati and Nordin, Latipah (2020) POTENTIAL BENEFITS AND OBSTACLES OF CLOUD COMPUTING IMPLEMENTATION IN HIGHER EDUCATION INSTITUTIONS(HEIs): A DELPHI STUDY. Journal of critical reviews, 7 (8). pp. 93-98. ISSN 2394-5125

Kavikumar, J. and S. P., Tiwari and A. H., Nor Shamsidah and Sharan, S. (2019) Restricted cascade and wreath products of fuzzy finite switchboard state machines. Iranian Journal of Fuzzy Systems, 16 (1). pp. 75-88. ISSN 17350654

Kavikumar, J. and S. P., Tiwari and Ebas, Nur Ain and A. H., Nor Shamsidah (2019) General fuzzy finite switchboard automata. New Mathematics and Natural Computation, 15 (2). pp. 283-305. ISSN 1793-0057

Kay, Huck Poh and Muhammad, Norhayati and Abdullah, Norazlin and A. Talip, Balkis (2018) The evaluation of antioxidant activity of individual and mixture of lemongrass, curry leaves, turmeric and ginger extracts. Journal of Science and Technology, 10 (2). pp. 66-70. ISSN 2600-7924

Kazeem, Abubakar and Badarulzaman, Nur Azam and Wan Ali, Wan Fahmin Faiz (2019) Effect of isothermal heat treatment on hardness of X7475 aluminium alloys. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 55 (2). pp. 233-239. ISSN 2289-7879

Kazeem, Abubakar and Badarulzaman, Nur Azam and Wan Ali, Wan Fahmin Faiz (2020) Relating fractographic analysis to yield strength of novel X7475 (Al–Zn–Mg–Cu) alloys produced by recycling aluminium beverage cans. Materials Letters, 262. pp. 1-4. ISSN 0167-577X

Kazmi, Saira and Mohd Noor, Siti Noor Fazelah and Sanif, Sazuliana (2023) SOCIAL ACTORS’ REPRESENTATIONAL ROLE IN POLITICAL HARD NEWS REPORTING: AN APPROACH THROUGH ATTITUDE ANALYSIS. -, 12. pp. 271-285.

Kh. Abugnah, Elhadi and Wan Salim, Wan Saiful-Islam and M. Elfaghi, Abdulhafid and Ngali, Zamani (2022) Comparison of 2D and 3D modelling applied to single phase flow of nanofluid through corrugated channels. CFD Letters, 14 (1). pp. 128-139.

Khaerudini, D. S. and Sebayang, D. and Mahzan, S. and Untoro, P. (2012) Thermal stability of nanostructured iron– chromium alloys for interconnect application of solid oxide fuel cells. Corrosion Engineering, Science and Technology, 47 (7). pp. 536-552.

Khahro, Shabir Hussain and Shaikh, Haseeb Haleem and Zainun, Noor Yasmin and Sultan, Basel and Khahro, Qasim Hussain (2023) Delay in Decision-Making Affecting Construction Projects: A Sustainable Decision-Making Model for Mega Projects. Sustainability, 15 (5872). pp. 1-22.

Khairi, Supar and H., Ahmad (2018) Strength predictions of multi-bolted joints in woven fabric kenaf composite plates with different configurations using xfem frameworks. Trends in Textile Engineering & Fashion Technology, 2 (3). pp. 1-10. ISSN 2578-0271

Khairudin, Siti Nur Fatimah and Pahroraji, Hazriel Faizal and Alias, Siti Khadijah and Ibrahim, Mohd Halim Irwan (2022) A review of metal injection moulding on WC-Co cemented carbide comprised of Grain Growth Inhibitors (GGI). Journal of Science and Technology, 14 (1). pp. 84-101.

Khalid, Amir and Manshoor, Bukhari and Mohmad Jaat, M. Norrizam and Tajuddin, A. S. A. and Syahrunniza, Hadi and Nursal, Ridwan Saputra and Zaman, I. (2017) Performance and emissions of diesel engine fuelled with preheated biodiesel fuel derived from crude palm, jatropha, and waste cooking oils. International Journal of Automotive and Mechanical Engineering, 14 (2). pp. 4273-4284. ISSN 2229-8649

Khalid, F.S. and Irwan, J.M. and Ibrahim, M.H. Wan and Othman, N. and Shahidan, S. (2018) Splitting tensile and pullout behavior of synthetic wastes as fiber-reinforced concrete. Construction and Building Materials, 171. pp. 54-64. ISSN 0950-0618

Khalid, Muhammad Haziq and Abd Rahman, Ramhuzaini and Abdul Latif, Hanif and Yahya, Musli Nizam (2018) Prototyping and performance evaluation of fire rated acoustic door. International Journal of Integrated Engineering, 10 (4). pp. 6-11. ISSN 2229-838X

Kholifah, Nur and Kurdi, Muqarramah Sulaiman and Nurtanto, Muhammad and Mutohhar, Farid and Fawaid, Moh and Subramaniam, Tamil Selvan (2023) The role of teacher self-efficacy on the instructional quality in 21st century: A study on vocational teachers, Indonesia. International Journal of Evaluation and Research in Education, 12 (2). pp. 998-1006. ISSN 2252-8822

Kholifah, Nur and Sulaiman Kurdi, Muqarramah and Muhammad Nurtanto, Muhammad Nurtanto and Mutohhari, Farid and Fawaid, Moh and Subramaniam, Tamil Selvan (2023) The role of teacher self-efficacy on the instructional quality in 21st century: A study on vocational teachers, Indonesia. International Journal of Evaluation and Research in Education (IJERE), 12 (2). pp. 998-1006. ISSN 2252-8822

Khusaimi, Z. and Amizam, S. and Mamat, M. H. and Sahdan, M. Z. and Ahmad, M. K. and Abdullah, N. and Rusop, M. (2010) Controlled growth of zinc oxide nanorods by aqueous-solution method. Synthesis and Reactivity in Inorganic, Metal-Organic, and Nano-Metal Chemistry, 40. pp. 190-194. ISSN 1553-3174

Kirin, Arwansyah and Mardhiah, Wan Ainaa and Siti Marpuah, Siti Marpuah and Husen Ismail, Faisal and Masruri, Muhammad and Rahman, Riki (2023) The Book of Nasa’ih Al-‘Ibad and Tanqih Al-Qaul by Shaykh Nawawi Al-Banteni: A Comparative Study on The Method Syarh Hadit. International Journal of Academic Research in Business and Social Sciences, 13 (1). pp. 109-121. ISSN 2222-6990

Kormin, S. and M. Rus, A. Z. and M. Azahari, M. S. (2018) Solvolysis liquefaction and characterization of biopolyol prepared from liquefied oil palm fruit waste. Journal of Fundamental and Applied Sciences, 10 (2S). pp. 701-721. ISSN 1112-9867

Kormin, Shaharuddin and Kormin, Faridah and Hossen Beg, Mohammad Dalour and Mat Piah, Mohd Bijarimi (2017) Physical and mechanical properties of LDPE incorporated with different starch sources. International Research and Innovation Summit (IRIS2017), 226 (012157). pp. 1-10.

Kormin, Shaharuddin and M. Rus, Anika Zafiah (2017) Preparation and characterization of biopolyol from liquefied oil palm fruit waste: part 2. Materials Science Forum, 882. pp. 113-118. ISSN 0255-5476

Ku Mohd Razali, Ku Siti Nor Habibah and Kasim, Shahreen and Hassan, Rohayanti and Mahdin, Hairulnizam and Ramli, Azizul Azhar and Md Fudzee, Mohd Farhan and Salamat, Mohamad Aizi (2018) Lensalyza photography studio reservation system. Acta Electronica Malaysia (AEM), 2 (2). pp. 6-9. ISSN 2590-4043

Kumar, Vinod Kumar K Sivak and Abdullah, Aslam and Basuno, Bambang (2022) Comparative study of two dimensional boundary layer over NACA 23012 and NACA 23021 airfoils by using keller’s box method. Journal of Advanced Mechanical Engineering Applications, 3 (1). pp. 25-33.

Kunchimon, Siti Zaharah and Tausif, Muhammad and Goswami, Parikshit and Cheung, Vien (2020) From hybrid fibers to microfibers: the characteristics of polyamide 6/polypropylene blend via one-step twin-screw melt extrusion. Polymer Engineering and Science, 60 (4). pp. 690-699. ISSN 0032-3888

Kuppulakshmi, V. and Sugapriya, C. and Kavikumar, J. and Nagarajan, D. (2023) Fuzzy Inventory Model for Imperfect Items with Price Discount and Penalty Maintenance Cost. Mathematical Problems in Engineering. pp. 1-15.

Kupusamy, Kumanan and Nagapan, Sasitharan and Abdullah, Abd Halid and Kaliannan, Suaathi and Sohu, Samiullah and Subramaniam, Shivaraj and Maniam, Haritharan (2019) Construction waste estimation analysis in residential projects of Malaysia. Engineering, Technology and Applied Science Research, 9 (5). pp. 4842-4845. ISSN 2241-4487

Kurniawan, Bagus Putu Yudhia and Halil, Halil and Abdul Razzaq, Abdul Rasid and Jumintono, Jumintono (2020) Improving marketing performance based on analysis of comparative and competitive advantages: an empirical study on java coffee agroindustry in Jember-Indonesia. International Journal of Supply Chain Management, 9 (5). pp. 1269-1275. ISSN 2050-7399

Lai, Zhe Phooi and Jubok, Zainodin and Roslan, Rozaini and Hashim, Ishak (2011) Steady flow about a sphere in a porous medium subject to an oscillating temperature. Journal of Science and Technology, 3 (1). pp. 123-141.

Lakhiara, Muhammad Tahir and Mohamad, Noridah and Abdul Samad, Abdul Aziz and Muthusamy, Khairunisa and Mydin, Md Azree Othuman and Goh, W. I. and George, Steafenie (2021) Effect of banana skin powder and coir fibre on properties and flexural behaviour of precast SCC beam. International Journal of Sustainable Engineering, 14 (5). pp. 1193-1206.

Lashari, Saima Anwar and Ibrahim, Rosziati and Senan, Norhalina (2017) Medical data classification using similarity measure of fuzzy soft set based distance measure. Journal of Telecommunication, Electronic and Computer Engineering, 9 (2-9). pp. 95-99. ISSN 2289-8131

Lazim, Dhabitah and Ali Shah, Zuraini and Saedudin, Rd Rohmat and Kasim, Shahreen and Azadin, Ayu Alyani and Hidayat, Rahmat and Ahmar, Ansari Saleh and Arief, Ikhwan (2018) Information management and psm evaluation system. International Journal of Engineering & Technology, 7 (1.6). pp. 17-19. ISSN 2227-524X

Lee, Kar Yee and Chuah, Chai Wen (2017) Secret channel using video steganography. International Journal on Informatics Visualization, 1 (4-2). pp. 240-245. ISSN 2549-9610

Lee, T. C. and Mohd Pu’ad, N. A. S. and Alipal, J. and Muhamad, M. S. and Basri, H. Basri and Idris, M. I. and Abdullah, H. Z. (2022) Tilapia wastes to valuable materials: A brief review of biomedical, wastewater treatment, and biofuel applications. Materials Today: Proceedings, 57. pp. 1389-1395.

Lee, T.C. and Abdullah, H.Z. and Koshy, P. and Idris, M.I. (2018) Deposition of novel bioactive nanoflower-like sodium titanate on TiO2 coating via anodic oxidation for biomedical applications. Materials Letters, 216. pp. 256-260. ISSN 0167-577X

Lee, T.C. and Abdullah, H.Z. and Koshy, P. and Idris, M.I. (2018) Ultraviolet-assisted biomimetic coating of bone-like apatite on anodised titanium for biomedical applications. Thin Solid Films, 660. pp. 191-198. ISSN 0040-6090

Lee, W.K. and Ratnam, M.M. and Ahmad, Z.A. (2016) Detection of fracture in ceramic cutting tools from workpiece proﬁle signature using image processing and fast Fourier transform. Precision Engineering, 44. pp. 131-142. ISSN 0141-6359

Lee M.F, Lee M.F (2023) Psychological Resilience of Employees in Adversity Quotient: Malaysian Perspective in Facing Challenges. Journal of Technical Education and Training, 15 (1). pp. 93-101. ISSN 2229-8932

Lee M.F, Lee M.F (2023) Psychological Resilience of Employees in Adversity Quotient: Malaysian Perspective in Facing Challenges. JOURNAL OF TECHNICAL EDUCATION AND TRAINING, 15 (1). pp. 93-101. ISSN 2229-8932

Leong, Wah June and Enshaei, Sharareh and Kek, Sie Long (2021) Diagonal quasi-Newton methods via least change updating principle with weighted Frobenius norm. Numerical Algorithms, 86. pp. 1225-1241.

Lim, Gim Huang and Nordin, Normayati and Lim, Chia Chun and Abdul Rahim, Nur Shafiqah and Mohamed Rasidi, Shamsuri and Shariff, Muhammad Zahid Firdaus (2020) Effect of turbulence intensity on turning diffuser performance at various angle of turns. CFD Letters, 12 (1). pp. 48-61. ISSN 2180-1363

Lim, Johnson Soon Chong and Md Yunos, Jailani and Spahat, Ghazally (2005) The development and evaluation of an e-module for pneumatics technology. Malaysian Online Journal of Instructional Technology, 2 (3). pp. 25-33. ISSN 1823-1144

Lim, Pui Jie and Ramlan, Rohaizan and Hassan, Rohayanti and Omar, Rashidah and Chan, Shiau Wei (2020) Website quality of Malaysian Technical University (MTUN). Indonesian Journal of Electrical Engineering and Computer Science, 18 (3). pp. 1624-1628. ISSN 2502-4752

Lim, Wei May and Abd Rahman, Raha and Hassan, Mohd Farid (2020) Comparison of predicted and actual traffic data at pumas, UTHM by using UAV and SIDRA. International Journal of Advance Science and Technology, 29 (10S). pp. 1181-1191. ISSN 2005-4238

Lim San Yee, San Yee and Mohd Salleh, Rohayu and Mohd Asrah, Norhaidah (2018) Multidimensional minimal spanning tree: the bursa Malaysia. Journal of Science and Technology, 10 (2). pp. 136-143. ISSN 2600-7924

Logeswaran Govindarajan, Logeswaran Govindarajan and Mohideen Batcha, Mohd Faizal and Abdullah, Mohammad Kamil (2023) Solar energy policies in southeast Asia towards low carbon emission: A review. Heliyon, 9. pp. 1-23.

Lokhande, P. E. and Pakdel, Amir and Pathan, H. M. and Kumar, Deepak and N. Vo, Dai-Viet and Al-Gheethi, Adel and Sharma, Ajit and Goel, Saurav and Pratap Singh, Prabal and Lee, Byeong-Kyu (2022) Prospects of MXenes in energy storage applications. Chemosphere, 297. pp. 1-24. ISSN 0045-6535

Lukmon Owolabi Afolabi, Lukmon Owolabi Afolabi and Christopher Chintua Enweremadu, Christopher Chintua Enweremadu and Kareem, M.W. and Adiat I. Arogundade, Adiat I. Arogundade and Irshad, Kashif and Islam, Saiful and M. Elfaghi, Abdulhafid and Djamal Hissein Didane, Djamal Hissein Didane (2023) Experimental investigation of double slope solar still integrated with PCM nanoadditives microencapsulated thermal energy storage. Desalination, 563. pp. 1-13.

Lukmon Owolabi Afolabi, Lukmon Owolabi Afolabi and Christopher Chintua Enweremadu, Christopher Chintua Enweremadu and M.W. Kareem, M.W. Kareem and Adiat I. Arogundade, Adiat I. Arogundade and Kashif Irshad, Kashif Irshad and Saiful Islam, Saiful Islam and K.O. Oladosu, K.O. Oladosu and Abdulhafid M. Elfaghi, Abdulhafid M. Elfaghi and Djamal Hissein Didane, Djamal Hissein Didane (2023) Experimental investigation of double slope solar still integrated with PCM nanoadditives microencapsulated thermal energy storage. Desalination, 553. pp. 1-13.

M, Omeje and O. Olusegun, Adewoyin and S. Joel, Emmanuel and C. O., Ehi-Eromosele and PraiseGod, Emenike C. and M. R, Usikalu . and Sayo A., Akinwumi and E., Zaidi and Saeed, Mohammad A. (2018) Natural radioactivity concentrations of 226Ra, 232Th, and 40K in commercial building materials and their lifetime cancer risk assessment in dwellers. HUMAN AND ECOLOGICAL RISK ASSESSMENT, 24 (8). pp. 2036-2053. ISSN 1080-7039

M Gismalla, M. S. and Abdullah, M. F. L. (2019) Optimization of received power and SNR for an indoor attocells network in visible light communication. Journal of Communications, 14 (1). pp. 64-69. ISSN 2374-4367

M M Mohamad, M M Mohamad and A Ahmad, A Ahmad and M H Yee1,, M H Yee1, and T K Tee, T K Tee and A N Mohd Nasir, A N Mohd Nasir (2021) Implementation of self-directed learning in enhancing skills dedicated to the community college teaching staff. Journal of Physics: Conference Series. pp. 2-10.

M Nasar, Norasikin and Abdul-Kahar, Rosmila and Esa, Fahmiruddin and Amir Hamzah, Nor Shamsidah (2018) Analysis of plasmonic structure using finite element method. Journal of Science and Technology, 10 (2). pp. 191-195. ISSN 2600-7924

M Shariff, M Riduan and Abdullah, M.F.L. and A Latiff, M Yusop and Hj. Mat Nor, Rosly (2019) Quantitative infrared thermography resolved leakage current problem in cathodic protection system. International Journal of Advanced Trends in Computer Science and Engineering, 8 (1.3). pp. 416-424. ISSN 2278-3091

M., Zaleha and S., Mahzan and Maizlinda Izwana, Maizlinda Izwana (2012) A review on the mechanical and physical properties of natural fiber composites. Applied Mechanics and Materials, 229 (231). pp. 276-281. ISSN 1660-9336

M., Zalinawati and Siregar, J. P. and C., Tezara and Jaafar, J. and M. Hamdan, M. H. and Oumer, A. N. and Rihayat, T. (2020) Effect of surface modification on mechanical properties of buri palm (corypha utan) fibre composite reinforcement. International Journal of Automotive and Mechanical Engineering (IJAME), 17 (4). pp. 8298-8309. ISSN 2229-8649

M., Zalinawati and Siregar, J. P. and Tezara, C. and Sazali, N. and Jaafar, J. and Oumer, A. N. and M. Hamdan, M. H. (2020) The effect of fibre treatment on water absorption and mechanical properties of buri palm (Corypha utan) fibre reinforced epoxy composites. Journal of Mechanical Engineering and Sciences (JMES), 14 (4). pp. 7379-7388. ISSN 2289-4659

M. A., A. Rahman and Akasah, Z. A. and Zuraidi, S. N. F. (2012) The importance of on-going maintenance in preserving the heritage listed buildings. International Journal on Advanced Science Engineering Information Technology, 2 (2). pp. 83-85.

M. A. Elfaghia, Abdulhafid and A. Abosbaia, Alhadi and A. Alkbir, Munir F. and A. B. Omran, Abdoulhdi (2022) Heat transfer enhancement in pipe using Al2O3/water nanofluid. CFD Letters, 14 (9). pp. 118-124. ISSN 2180-1363

M. A. Elfaghia, Abdulhafid and A. Abosbaia, Alhadi and F. A. Alkbir, Munir and A. B. Omran, Abdoulhdi (2022) CFD simulation of forced convection heat transfer enhancement in pipe using Al2O3/water nanofluid. Journal of Advanced Research in Numerical Heat Transfer, 8 (1). pp. 44-49.

M. Azahar, N. and A. Hassan, N. and P. Jaya, R. and Hainin, M.R. and M. Yusoff, N.I. and M. Kamaruddin, N.H. and M. Yunus, N.Z. and A. Hassan, S. and Yaacob, H. (2019) Properties of cup lump rubber modified asphalt binder. Road Materials and Pavement Design, 22 (6). pp. 1329-1349. ISSN 1468-0629

M. Elfaghi, Abdulhafid and Asrar, Waqar and A. Omar, Ashraf (2009) Comparison of high-order accurate schemes for solving the nonlinear viscous burgers equation. Australian Journal of Basic and Applied Sciences, 3 (3). pp. 2535-2543. ISSN 1991-8178

M. Elfaghi, Abdulhafid and Asrar, Waqar and A. Omar, Ashraf (2010) Higher Order Compact-Flowfield Dependent Variation (HOC-FDV) solution of one-dimensional problems. Engineering Applications of Computational Fluid Mechanics, 4 (3). pp. 434-440. ISSN 1994-2060

M. Hamdan, M. H. and Siregar, J. P. and M. Rejab, M. R. and Bachtiar, D. and Jamiluddin, J. and Tezara, C. (2019) Efect of maleated anhydride on mechanical properties of rice husk filler reinforced PLA Matrix Polymer Composite. International Journal of Precision Engineering and Manufacturing-Green Technology, 1 (1). ISSN 2288-6206

M. Letchumanan, Shaktivell and ajul Arifin, Ahmad Mubarak and Taib, Ishkrizat and Nor Salim, Nor Adrian (2023) Computational Fluid Dynamic Analysis on Carbon Fibre Reinforced Polymer Wrapped on Defected Oil and Gas Piping System Using Solidwork Flow Simulation. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 101 (2). pp. 197-210. ISSN 2289-7879

M. Rus, A. Z. and Kormin, S. (2018) Fabrication and characterization of polyurethane foam prepared from liquefied oil palm mesocarp fibre with renewable monomer made from waste cooking oil. Journal of Fundamental and Applied Sciences, 10 (2S). pp. 722-744. ISSN 1112-9867

M. Tahir, A. F. and Rashid, A. R. and Sariff, N. E. and A. Rahim, E. (2020) CO2 laser cutting performance on ultra high strength steel (UHSS). Lasers in Manufacturing and Materials Processing, 7. pp. 15-37. ISSN 2196-7229

M. Usama, Khadija and Wan Yusoff, Wan Fauziah (2018) The relationship between entrepreneurs’ financial literacy and business performance among entrepreneurs of Bauchi State Nigeria. International Journal of Entrepreneurship and Business Innovation, 1 (1). pp. 15-26. ISSN 2752-466X

M. Yusup, Eliza and Mahzan, Shahruddin and Mohammad, Baharuddin and Wan Daud, Wan Rosli (2013) A novel approach for bone scaffold from oil palm empty fruit bunch cellulose phosphate / glass material. Advanced Materials Research, 748. pp. 180-183. ISSN 1022-6680

M.A., Rabiatul Adawiyah and O., Saliza Azlina (2018) Comparative study on the isothermal aging of bare Cu and ENImAg surface finish for Sn-Ag-Cu solder joints. Journal of Alloys and Compounds, 740. pp. 958-966. ISSN 0925-8388

M.A., Rabiatul Adawiyah and O., Saliza Azlina (2017) Interfacial reaction between SAC305 lead–free solders and ENImAg surface finish and bare copper. Materials Science & Engineering Technology, 48 (3-4). pp. 235-240. ISSN 0933-5137

M.Said, Salina and Hasan, Azman and Monzaid, Eza and Zaime, Adib Farhan (2018) Validity and reliability of questionnaire items for the development of the green competency model among polytechnic lecturers in Malaysia using Rasch measurement model. ADVANCE SCIENCE LETTERS, 24 (1). pp. 439-442. ISSN 1936-661X

MOHAMMED AHMED JUBAIR, MOHAMMED AHMED JUBAIR and SALAMA A. MOSTAFA, SALAMA A. MOSTAFA and DILOVAN ASAAD ZEBARI, DILOVAN ASAAD ZEBARI and HUSSEIN MUHEE HARIZ, HUSSEIN MUHEE HARIZ and NEJOOD FAISAL ABDULSATTAR, NEJOOD FAISAL ABDULSATTAR and MUSTAFA HAMID HASSAN, MUSTAFA HAMID HASSAN and ALI HASHIM ABBAS, ALI HASHIM ABBAS and FATIMA HASHIM ABBAS, FATIMA HASHIM ABBAS and AREEJ ALASIRY, AREEJ ALASIRY and M. TURKI-HADJ ALOUANE, M. TURKI-HADJ ALOUANE (2022) A QoS Aware Cluster Head Selection and Hybrid Cryptography Routing Protocol for Enhancing Efficiency and Security of VANETs. Digital Object Identifier, 10. pp. 1-13.

MUSA, UMAR and MOHD SHAH, SHAHARIL and MAJID, HUDA A. and MAHADI, ISMAIL AHMAD and A. RAHIM, MOHAMAD KAMAL and YAHYA, MUHAMMAD SANI and ZAINAL ABIDIN, ZUHAIRIAH (2023) Design and Analysis of a Compact Dual-Band Wearable Antenna for WBAN Applications. Digital Object Identifier, 11. pp. 30996-31009.

Ma, Chau-Khun and Awang, Abdullah Zawawi and Omar, Wahid and Sarbini, Noor Nabilah and Shahidan, Shahiron (2018) State of the art on pre-tensioning steel straps confinement: literature review. Malaysian Construction Research Journal (MCRJ), 4 (2). pp. 210-220. ISSN 1985-3807

Maarup, Syahrul Nizam and Hamdan, Rafidah and Othman, Norzila and Al-Gheethi, Adel and Alkhadher, Sadeq and Abd El-Hady, M. M. and S. El-Sayed Saeed, S. El-Sayed Saeed (2023) Steel Slag and Limestone as a Rock Filter for Eliminating Phosphorus from Domestic Wastewater: A Pilot Study in a Warm Climate. Water, 15 (657). pp. 1-18.

Maarup, Syahrul Nizam and Hamdan, Rafidah and Othman, Norzila and Al-Gheethi, Adel and Alkhadher, Sadeq and Abd El-Hady, M. M. and Sayed Saeed, S. El (2023) Steel Slag and Limestone as a Rock Filter for Eliminating Phosphorus from Domestic Wastewater: A Pilot Study in a Warm Climate. Water, 15 (657). pp. 1-18.

Maarup, Syahrul Nizam and Hamdan, Rafidah and Othman, Norzila and Al-Gheethi, Adel Ali Saeed and Alkhadher, Sadeq and El-Hady, M. M. Abd and Saeed, S. El-Sayed (2023) Steel Slag and Limestone as a Rock Filter for Eliminating Phosphorus from Domestic Wastewater: A Pilot Study in a Warm Climate. water, 15 (4). pp. 1-18.

Maha Agung, P. A. and Rouf Hasan, M. F. and Susilo, Adi and A. Ahmad, Mustaffa and Ahmad, Mohd. J. and Abdurrahman, U. A. and Sudjianto, A. T. and Suryo, Eko Andi (2023) Compilation of Parameter Control for Mapping the Potential Landslide Areas. Civil Engineering Journal, 9 (4). pp. 974-989. ISSN 2676-6957

Maha Agung, Putera Agung and Hasan, Muhammad Fathurrouf and Ahmad, Mustaffa Anjang and Martina, Nunung and Saifullizan, M. B. (2022) Prediction of QU AND Ru capacitiesof pile in clayey soil layer using geospatial analysis. International Journal of GEOMATE, 23 (98). pp. 31-38. ISSN 2186-2990

Mahadi, Lina Farhana and Ibrahim, Nabilah and Zaluwi, Mohd Thariq and S.M Johan, Muhammad Haniff (2019) Performance evaluation on mitral valve motion feature tracking using kanade-lucas-Tomasi (KLT) algorithm based eigenvalue measurement. AIP Conference Proceedings, 2173 (1). 020002-1. ISSN 0094-243X

Mahadzir, M. A. and Hassan, Nurhafizzah and Khirotdin, Rd Khairilhijra' and Ngadiron, M. F. (2018) Overview of Printing Wearable Antenna. Journal of Fundamental and Applied Sciences, 10 (3S). pp. 397-411. ISSN 1112-9867

Mahamad, Abd Kadir and Saon, Sharifah and Hiyama, Takashi (2010) Predicting remaining useful life of rotating machinery based artificial neural network. Computers and Mathematics with Applications, 60. pp. 1078-1087. ISSN 0898-1221

Mahdi, Ahmed Sahib and Mustapa, Mohd Sukri and Mohamad, Mahmod Abd Hakim and Tobi, Abdul L. M. and Ab Kadir, Muhammad Irfan and Samsi, Mohd Arif (2017) Dry sliding wear behavior of the reinforced by graphite particle and heat treated of recycled aluminum AA6061 based MMC fabricated by powder metallurgy method. Key Engineering Materials, 740 (NIL). pp. 9-16. ISSN 1013-9826

Mahmood, Muhammad Amirul Hakim and A.Khalifa, Nasradeen (2022) Review study on stabilized fly ash type c as admixture in sub-grade of pavement. Recent Trends in Civil Engineering and Built Environment, 3 (1). 074-082.

Mahmood, Salwa and Syed Abdul Aziz, Syed Abd.Hafiz and Zulkifli, Mohd Zakwan and Marsi, Noraini (2020) Rula and Reba analysis on work postures: a case study at poultry feed manufacturing industry. Journal of Computational and Theoretical Nanoscience, 17 (2-3). pp. 755-764. ISSN 1546-1955

Mahmud, Farhanahani and Shiozawa, Naruhiro and Makikawa, Masaaki and Nomura, Taishin (2011) Reentrant excitation in an analog-digital hybrid circuit model of cardiac tissue. Chaos: An Interdisciplinary Journal of Nonlinear Science, 21 (2).

Mahmud, N.N.H.E.N. and Awang, N.A. and Zalkepali, N.U.H.H. and Latif, A.A. and Muhammad, N.A.M. and Zamri, A.Z.M. (2023) The influence of Au-NP thickness coated on side-polished fiber on the properties of mode-locked erbium-doped fiber laser. Infrared Physics and Technology, 130. pp. 1-8.

Mahzan, Shahruddin and J. Staszewski, Wieslaw and Worden, Keith (2010) Experimental studies on impact damage location in composite aerospace structures using genetic algorithms and neural networks. Smart Structures and Systems, 6 (2). pp. 147-165. ISSN 1738-1584

Majeed, Faraj Saeid Adrees and Suhaimi, Mohd Azlan and Mohd Yusof, Nordin and Nabgan, Walid and Ahmad, Rosli and Asmael, Mohammed Basher and Hj.Yusof, Mohd Sallehuddin and Abdullah, Suhail Najm (2020) Effect of combined Ce and Er Addition on Solidification, Microstructure of the Al-7Si-alloy. Journal of Advanced Mechanical Engineering Applications, 1 (1). pp. 36-45. ISSN 2716-6201

Malik, N. and Gouseti, O. and Bakalis, S. (2018) Effect of freezing on microstructure and reconstitution of freeze-dried high solid hydrocolloid-based systems. Food Hydrocolloids, 83. pp. 473-484. ISSN 0268-005X

Malik, N. and Muttakin, S. and Lopez-Quiroga, E. and Watson, N.J. and Fryer, P.J. and Bakalis, S. and Gouseti, O. (2020) Microstructure and reconstitution of freeze-dried gum Arabic at a range of concentrations and primary drying temperatures. Food Hydrocolloids, 104. pp. 1-11. ISSN 0268-005X

Mallam Baba, Habu and Kasim, Rozilah and Mohd Diah, Mohd Lizam Bin and Martin, David and Usman Alhaji, Muktar (2018) Framework of property rating practice for financing neighborhoods facilities provision in Bauchi Metropolis Nigeria. International journal of Business Management, 3 (3). pp. 44-64. ISSN 2520-5943

Mangi, Sajjad Ali and Wan Ibrahim, Mohd Haziman and Jamaluddin, Norwati and Shahidan, Shahiron and Arshad, Mohd Fadzil and Memon, Sheeraz Ahmed and Putra Jaya, Ramadhansyah and Mudjanarko, Sri Wiwoho and Setiawan, Muhammad Ikhsan (2018) Influence of ground coal bottom ash on the properties of concrete. International Journal of Sustainable Construction Engineering and Technology (IJSCET), 9 (2). pp. 2180-3242. ISSN 2180-3242

Manshoor, B. and Nicolleau, F. C. G. A. and Beck, S.B.M. (2011) The fractal flow conditioner for orifice plate flow meters. Flow Measurement and Instrumentation. pp. 208-214. ISSN 0955-5986

Manshoor, Bukhari and Sapit, Azwan and Nordin, Normayati and Hariri, Azian and Salleh, Hamidon and Razali, Mohd Azahari and Zaman, Izzuddin and Khalid, Amir and Ghazali, Mohd Fairusham and Alsayed, Muneer Khalifa (2020) Simulation of fractal like branching microchannel network on rectangular heat sink for single phase flow. CFD Letters, 12 (2). pp. 69-79. ISSN 2180-1363

Manshoor, Bukhari and Zaman, Izzuddin and Khalid, Amir and Ghazali, M.F. and Khandelwal, Manish K. (2020) Effect of streamwise spacing on the sound generated by flow through two square cylinders in tandem arrangement. International Journal of Advanced Trends in Computer Science and Engineering, 9 (1.1). pp. 534-541. ISSN 2278-3091

Mansor, Fawwaz Zamir and Mustapha, Aida and Din, Roshidi and Abas, Azizi and Utama, Sunariya (2018) An antonym substitution-based model on linguistic steganography method. Indonesian Journal of Electrical Engineering and Computer Science, 12 (1). pp. 225-232. ISSN 2502-4752

Marjudi, Suziyanti and Setik, Roziyani and Salamat, Mohamad Aizi and Irfan Yusfaidir, Muhammad Fahruddin (2023) The Design and Development of Smart Agriculture Data Analytics. International Journal of Emerging Technology and Advanced Engineering, 13 (1). pp. 82-91.

Marjudi, Suziyanti and Setik, Roziyani and Salamat, Mohamad Aizi and Yusfaidir, Muhammad Fahruddin Irfan (2023) The Design and Development of Smart Agriculture Data Analytics. International Journal of Emerging Technology and Advanced Engineering, 13 (1). pp. 82-91. ISSN 2250-2459

Marsi, Noraini and Chow, Li Kien and A Rani, Juhari and Main, Nor Mazlana and Mohd Jamir, Mohd Ridzuan and Shaari, Muhammad Farid (2020) Preparation and Performance Test of PEFB Reinforced Box Waste Coated Superhydrophobic Coating for Shoe Sole Application. International Journal of Integrated Engineering, 12 (5). pp. 210-216. ISSN 2229-838X

Marwan, Hazlina and Ali, Azita Experts’ consensus to identify elements of career management competencies in Work-Based Learning (WBL) program using Fuzzy Delphi Analysis. International Journal of Emerging Technologies in Learning, 14 (20). pp. 73-86.

Marwan, S. H. and M. Wahi, M. A. and Abdullah, A. H. and Mazlan, M. H. (2018) Finite element analysis of protective bicycle helmet & dummy head under dynamic loading. Journal of Fundamental and Applied Sciences, 10 (4S). pp. 870-881. ISSN 1112-9867

Marylin Miga, Marylin Miga and Jahar, Puteri Nur Syahzanani and Sivachandran Parimannan, Sivachandran Parimannan and Heera Rajandas, Heera Rajandas and Latif, Muhammad Abu Bakar and Yap Jing We, Yap Jing We and Shamsir, Mohd Shahir and Mohd Salleh, Faezah (2023) Characterization of the nearly complete mitochondrial genome of ochraceous darkies, Euphaea ochracea Selys, 1859 (Odonata: Zygoptera: Euphaeidae) and phylogenetic analysis. MITOCHONDRIAL DNA PART B: RESOURCES, 8 (2). pp. 292-296.

Marylin Miga, Marylin Miga and Jahari, Puteri Nur Syahzanani and Sivachandran Parimannan, Sivachandran Parimannan and Heera Rajandas, Heera Rajandas and Latiff, Muhammad Abu Bakar and Yap Jing Wei, Yap Jing Wei and Shamsir, Mohd Shahir and Mohd Salleh, Faezah (2023) Characterization of the nearly complete mitochondrial genome of ochraceous darkies, Euphaea ochracea Selys, 1859 (Odonata: Zygoptera: Euphaeidae) and phylogenetic analysis. MITOCHONDRIAL DNA PART B: RESOURCES, 8 (2). pp. 292-296.

Marylin Migaa, Marylin Migaa and Yong Zi Yapa, Yong Zi Yapa and Jaharia, Puteri Nur Syahzanani and Sivachandran Parimannan, Sivachandran Parimannan and Heera Rajandas, Heera Rajandas and Latifr, Muhammad Abu Bakar and Yap Jing Wei, Yap Jing Wei and Shamsir, Mohd Shahir and Mohd Salleha, Faezah (2022) Complete mitochondria! genome data and phylogenetic analysis of the Great Marquis, Bassarona dunya (Doubleday, 1848) (Lepidoptera: Nymphalidae: Limenitidinae) from Malaysia. MITOGENOME ANNOUNCEMENT, 8 (1). pp. 164-171.

Marzuki, Muhammad Azfar Muqri and Nordin, Normayati and Mohamed Rasidi, Shamsuri (2022) Effect of inner wall curvature on loss characteristic and flow rectification of curved diffuser. Journal of Complex Flow, 4 (1). pp. 1-7. ISSN 2672-7374

Masdar, Aizan and Ibrahim, B. S. K. K. and Abdul Jamil, M. Mahadi (2012) Development of low-cost current controlled stimulator for paraplegics. International Journal of Integrated Engineering, 4 (3). pp. 40-47.

Masduki, Masadliahani and Zakaria, Normah (2022) Items for measuring the construct of Workplace Oral Communication Skills (WOCS) amongst civil engineering students: step by step using Exploratory Factor Analysis (EFA). SOCIAL SCIENCES & HUMANITIES, 30 (1). pp. 209-227. ISSN 0128-7702

Masek, Alias and Mohd Salleh, Kahirol and Alias, Maizam (2022) A hybrid facilitation model for inexperienced students via integration of teacher-centred and student-centred roles. Journal of Engineering Education Transformations, 35 (2). pp. 156-164.

Masek, Alias and Muhammad Nurtanto, Muhammad Nurtanto and Nur Kholifah, Nur Kholifah and Mutohhari, Farid and Zainal, Rizal (2022) Learning skills from distance: a solar photovoltaic site survey from students’ view. International Journal of Information and Education Technology, 12 (8). pp. 725-731. ISSN 2010-3689

Masood, Ibrahim and Hassan, Adnan (2014) Bivariate quality control using two-stage intelligent monitoring scheme. Expert Systems with Applications, 41 (16). pp. 7579-7595. ISSN 0957-4174

Masood, Ibrahim and Hassan, Adnan (2010) Issues in development of artificial neural network-based control chart pattern recognition schemes. European Journal of Scientific Research, 39 (9). pp. 336-355. ISSN 1450-216X

Masood, Ibrahim and Hassan, Adnan (2018) Pattern recognition for bivariate process mean shifts using feature-based artificial neural network. The International Journal of Advanced Manufacturing Technology, 66. pp. 1201-1218. ISSN 0268-3768

Masrol, Shaiful Rizal and Irwan Ibrahim, Mohd Halim and Adnan, Sharmiza and Ahmad Tajudin, Muhammad Syauqi Asyraf and Raub, Radhi Abdul and Abdul Razak, Siti Nurul Aqma and Md Zain, Siti Nur Faeza (2017) Effects of beating on the characteristics of Malaysian durian (Durio Zibethinus Murr.) rind chemi-mechanical (CMP) pulp and paper. Jurnal Teknologi, 80 (2). pp. 9-17. ISSN 2180–3722

Masrom, Md Asrul Nasid and Eahwan, Norsyamimi and Alifiah, Mohd Norfian and Goh, Kai Chen and Mohamed, Sulzakimin (2018) An initial investigation of the relationship between capital structure and firm performance among large (G7) construction companies: a conceptual framework. Journal of Science and Technology, 10 (6). pp. 29-38. ISSN 1943-023X

Mat Hassan, Nik Normunira and Shamsudin, Zainon Sharmila and Mohd Rus, Anika Zafiah and Sulong, Nurulsaidatulsyida (2018) Investigation of renewable polymer composite from waste oil endurance to UV irradiation exposure by using FTIR and UV-VIS. Journal of Mechanical Engineering, 5 (5). pp. 53-61. ISSN 1823- 5514

Mat Radzuan, Indera Syahrul and Mansir, Dodo and Ahmad, Yahaya (2018) Exploring training factors as incentive tools in safeguarding cultural heritage of Malaysian traditional settlements. Journal of Heritage Management, 2 (2). pp. 189-201. ISSN 2455-9296

Mat Raffei, Anis Farihan and Hassan, Rohayanti and Kasim, Shahreen and Asmuni,, Hishamudin and Ahmad, Asraful Syifaa’ and Hidayat, Rahmat and Ahmar, Ansari Saleh (2018) Iris segmentation. International Journal of Engineering & Technology, 7 (2.5). pp. 77-83. ISSN 2227-524X

Mat Serudin, Anisah and Mydin, Md Azree Othuman and Mohd Nawi, Mohd Nasrun and Deraman, Rafikullah and Sari, Marti Widya and Abu Hashim, Mohammad Firdaus (2022) The utilization of a fiberglass mesh–reinforced foamcrete jacketing system to enhance mechanical properties. Materials, 15. pp. 1-17.

Maxwell, O. and Adewoyin, O.O. and Joel, E.S. and Ehi-Eromesele, C.O. and Akinwumi, S.A. and Usikalu, M.R. and Emeike, C.P. and Embong, Z. and Hassaina, M. (2018) Radiation exposure to dwellers due to naturally occurring radionuclides found in selected commercial building materials sold in Nigeria. Journal of Radiation Research and Applied Sciences, 11 (3). pp. 225-231. ISSN 1687-8507

Mazlan, Siti Azela and Abang Hasbollah, Dayang Zulaika and Ahmad Legiman, Mariatul Kiftiah and Mohd Taib, Aizat and Ibrahim, Aniza and Ramli, Ahmad Bukhari and Jusoh, Siti Norafida and Abdul Rahman, Norinah and Md Dan, Mohd Firdaus and Zukri, Azhani (2023) Effectiveness of coffee husk ash and coconut fiber in improving peat properties. Physics and Chemistry of the Earth, 130. pp. 1-8.

Md Ali, Umi Fazara and Azmi, Nur Hidayah and Md Isa, Khairuddin and Aroua, Mohamed Kheireddine and Tan, Ru Shien and Khamidun, Mohd Hairul (2018) Optimization study on preparation of amine functionalized sea mango (cerbera odollam) activated carbon for Carbon Dioxide (CO2) adsorption. Combustion Science and Technology, 190 (7). pp. 1259-1282. ISSN 0010-2202

Md Ali, Zarina and Lai, Wai Tan and Daud, Ira Masyra and Ahmad, Noor Aliza (2017) Rainfall characteristics of Johor Bahru and Kota Bharu, Malaysia. Rainfall characteristics of Johor Bahru and Kota Bharu, Malaysia, 9 (4). pp. 77-83. ISSN 2229-8460

Md Amin Hamzas, Mohd Fidzwan and Ahmad Bareduan, Salleh and Hussin, M.S. and Hasnul, M.J. (2012) Performance evaluation of m3 bottleneck based heuristic for M1M2M3 flow shop. International Review of Mechanical Engineering (IREME), 6 (6). pp. 1253-1256.

Md Ariffin, Khadijah and Kasim, Rozilah and Ishak, Mohd Hafizal and Harun, Mohd Rosli and Mohd Noh, Zainuddin (2018) Facilities performance audit on public buildings. Journal of Advanced Research in Dynamical and Control Systems, 10 (6). pp. 140-143. ISSN 1943-023X

Md Ariffin, Latifah and Senu, Norazak and Suleiman, Mohamed and Abdul Majid, Zanariah (2018) Embedded explicit two-step runge-kutta-nystr¨om for solving special second-order IVPs. Applied Mathematical Sciences, 8 (94). pp. 4655-4673. ISSN 1312-885X

Md Dan, M.F.A. and Tonnizam, M. Edy and I. Komoo, I. Komoo and A. Madun, A. Madun and Abu Talib, M.K. and Ramadhansyah, P.J. and Mohd Taib, A. and Abang Hasbollah, D.Z. and Md Yusof, Z. and Noorasyikin, M.N. (2023) Physico-mechanical characteristics of tropical granite boulders in weathered heterogeneous zones for geotechnical design purposes. Physics and Chemistry of the Earth, 129. pp. 1-12.

Md Khudzari, Jauharah and Wagiran, Husin and Hossain, Md. Imam and Ibrahim, Noorddin and Agam, Mohd Arif (2011) Heavy metals Mn, Fe, Ni, Cu and Zn in human hair samples using energy dispersive X-ray fluorescence analysis. International Journal of the Physical Sciences, 6 (8). pp. 2090-2094.

Md Nasrudin, Farah Suraya and Chang Phang, Chang Phang (2022) Numerical Solution via Operational Matrix for Solving Prabhakar Fractional Differential Equations. Journal of Mathematics and Statistics, 2022. pp. 1-7. ISSN 1549-3644

Md Nasrudin, Farah Suraya and Chang Phang, Chang Phang and Afshan Kanwal, Afshan Kanwal (2023) Fractal-fractional advection–diffusion–reaction equations by Ritz approximation approach. Open Physics. pp. 1-8.

Md Nasrudin, Farah Suraya and Chang Phang, Chang Phang and Kanwal, Afshan (2023) Fractal-fractional advection–diffusion–reaction equations by Ritz approximation approach. Open Physics. pp. 1-8.

Md Nasrudin, Farah Suraya and Phang, Chang and Kanwal, Afshan (2022) Fractal-fractional advection–diffusion–reaction equations by Ritz approximation approach. Open Physics. pp. 1-8.

Md Nor, Danial and Abd. Wahab, M. Helmy and M. Jenu, M. Zarar and Ogier, Jean-Marc (2012) A new visual signature for content-based indexing of low resolution documents. Journal of Information Retrieval and Knowledge Management, 2. pp. 88-95.

Md Nor, Shahidah and Phebe Ding, Phebe Ding and Tan Jit Chun, Tan Jit Chun (2023) Locule Position and Thawing Duration Affect Postharvest Quality of Freshly Cryo-Frozen Musang King Durian Fruit. TROPICAL AGRICULTURAL SCIENCE. pp. 1-12. ISSN 1511-3701

Md Shah, Nur Zehan An’nisa and Morsin, Marlia and Sanudin, Rahmat and Razali, Nur Liyana and Nafisah, Suratun and Soon, Chin Fhong (2020) Effects of growth solutions ageing time to the formation of gold nanorods via two-step approach for plasmonic applications. Plasmonics, 15. pp. 923-932. ISSN 1557-1955

Md Som, Mohd Fairus and Abdullah, Mohd Fahmy and Rashid, Umi Kartini and Rahim, Mohd Bekri (2022) Implementation of entrepreneurship education in Malaysian Skills Certificate (MSC) training programme in Malaysia. Jundishapur Journal of Microbiology, 15 (1). pp. 2678-2687.

Md Yassin, Azlina and Bond, Sandy and McDonagh, John (2011) Developing guidelines for riverfront developments for Malaysia. Pacific Rim Property Research Journal, 17 (4). pp. 511-530.

Md Yassin, Azlina and Bond, Sandy and Mcdonagh, John (2011) Waterfront development in Malaysia: do we have sustainable governance? Pacific Rim Property Research Journal, 17 (3). pp. 336-356.

Md. Ali, Massofia and Abas, Nor Haslinda and Mohd Affandi, Haryanti and Abas, Nor Ain (2018) Factors impeding the industrialized building system (IBS) implementation of building construction in Malaysia. International Journal of Engineering & Technology, 7 (4). pp. 2209-2212. ISSN 2209-2212

Md. Jizat, Nor Atikah and Abd Baser, Jamil and Hamidon, Nur Izeanty (2018) A review of informal learning model for polytechnic student. Advanced Science Letters, 24 (11). pp. 8067-8071. ISSN 1936-6612

Md. Mahmudur Rahman, Md. Mahmudur Rahman and Kok Beng Gan, Kok Beng Gan and Abd Aziz, Noor Azah and Audrey Huong, Audrey Huong and Huay Woon You, Huay Woon You (2023) Upper Limb Joint Angle Estimation Using Wearable IMUs and Personalized Calibration Algorithm. Mathematics, 11 (970). pp. 1-17.

Md. Rohani, Munzilah and Mohd. Nawi, Nafhah Nabiha and Daniel, Basil David and Aman, Mohd. Yusri and Buhari, Rosnawati and Ambak, Kamaruddin (2018) An overview of bus drivers and accident involvement. Advanced Science Letters, 24 (11). pp. 8683-8686. ISSN 1936-6612

Md. Yassin, Azlina and Bond, Sandy and McDonagh, John (2012) Principles for sustainable riverfront development for Malaysia. Journal of Techno-Social, 4 (1). pp. 21-36.

Md. Yassin, Azlina and Shareh Musa, Sharifah Meryam (2012) Kelestarian pembangunan hadapan Air di Malaysia. Akademika, 82 (2). pp. 3-13.

Md. Yusof, Zeety and Al-Adhami, Abdullah Mahgoob Yahya and Mohd Matore, Mohd Effendi Ewan (2022) Compressive strength of stabilised granitic residual soil using mixture of pineapple fibre—hydrated lime. Sustainability, 14 (3826). pp. 1-16. ISSN 2071-1050

Mechman, Ali and Omar, Siti Sarah and Hamawandy, Nawzad Majeed and Abdullah, Arshad Sedeeq and Qader, Abdulkhaleq Nader (2022) The effect of digital marketing, and e-commence on SMEs performance of Baghdad. Journal of Positive School Psychology, 6 (3). pp. 4197-4212.

Meerangani, Khairul Azhar and Abdul Hamid, Mohammad Fahmi and Hashim, Siti Nurul Izza and Jofri, Muhamad Hanif and Mansor, Muhamad Sayuti (2023) Digital Platform Potential for Asnaf Zakat Entrepreneurs: A Systematic Literature Review. International Journal of Academic Research in Business and Social Sciences, 13 (1). 1184 -1199.

Meerangani, Khairul Azhar and Abdul Hamid, Mohammad Fahmi and Hashim, Siti Nurul Izza and Sharif, Dziauddin and Jofr, Muhamad Hanif and Mansor, Muhamad Sayuti (2023) Digital Platform Potential for Asnaf Zakat Entrepreneurs: A Systematic Literature Review. International Journal of Academic Research in Business and Social Sciences, 13 (1). pp. 1184-1199. ISSN 2222-6990

Meerangani,, Khairul Azhar and Abdul Hamid, Mohammad Fahmi and Hashim, Siti Nurul Izza and Sharif, Dziauddin and Jofr, Muhamad Hanif and Mansor, Muhamad Sayuti (2023) Digital Platform Potential for Asnaf Zakat Entrepreneurs: A Systematic Literature Review. International Journal of Academic Research in Business and Social Sciences, 13 (1). pp. 1184-1199. ISSN 2222-6990

Mehbodniya, Abolfazl and Haq, Mohd Anul and Kumar, Anil and Ismail, Mohd Erfy and Dahiya, Priyanka and Karupusamy, Sathishkumar (2022) Data reinforcement control technique‑based monitoring and controlling of environmental factors for IoT applications. Arabian Journal of Geosciences, 15. pp. 1-8.

Miga, Marylin and Jahar, Puteri Nur Syahzanani and Sivachandran Parimannan, Sivachandran Parimannan and Rajandasb, Heera and Latiff, Muhammad Abu Bakar and Yap Jing Wei, Yap Jing Wei and Shamsir, Mohd Shahir and Mohd Salleh, Faezah (2023) Characterization of the nearly complete mitochondrial genome of ochraceous darkies, Euphaea ochracea Selys, 1859 (Odonata: Zygoptera: Euphaeidae) and phylogenetic analysis. MITOGENOME ANNOUNCEMENT, 8 (2). pp. 1-6.

Miga, Marylin and Jahari, Puteri Nur Syahzanani and Parimannan, Sivachandran and Rajandas, Heera and Latiff, Muhammad Abu Bakar and Yap Jing Weid, Yap Jing Weid and Shamsir, Mohd Shahir and Mohd Salleh, Faezah (2023) Characterization of the nearly complete mitochondrial genome of ochraceous darkies, Euphaea ochracea Selys, 1859 (Odonata: Zygoptera: Euphaeidae) and phylogenetic analysis. MITOCHONDRIAL DNA PART B: RESOURCES, 8 (2). pp. 292-296.

Migaa, Marylin and Yong Zi Yapa, Yong Zi Yapa and Jaharia, Puteri Nur Syahzanani and Parimannan, Sivachandran and Rajandas, Heera and Latifr, Muhammad Abu Bakar and Yap Jing Wei, Yap Jing Wei and Shamsir, Mohd Shahir and Mohd Salleha, Faezah (2023) Complete mitochondria! genome data and phylogenetic analysis of the Great Marquis, Bassarona dunya (Doubleday, 1848) (Lepidoptera: Nymphalidae: Limenitidinae) from Malaysia. MITOCHONDRIAL DNA. pp. 167-171.

Migaa, Marylin and Zi Yapa, Yong and Jaharia, Puteri Nur Syahzanani and Parimannanb, Sivachandran and Rajandas, Heera and Latifr, Muhammad Abu Bakar and Yap Jing Wei, Yap Jing Wei and Shamsir, Mohd Shahir and Mohd Salleha, Faezah (2023) Complete mitochondria! genome data and phylogenetic analysis of the Great Marquis, Bassarona dunya (Doubleday, 1848) (Lepidoptera: Nymphalidae: Limenitidinae) from Malaysia. MITOGENOME ANNOUNCEMENT, 8 (1). pp. 1-6.

Milala, Sani Inusa and Md Ariffin, Khadijah and Kasim, Rozilah (2022) Facilities management business opportunities. International Journal of Sustainable Construction Engineering and Technology (IJSCET), 13 (2). pp. 258-267. ISSN 2180-3242

Mior Shahidina, Shazatul Akmaliah and Fadila, Nor Akmal and Yusopa, Mohd Zamri and Tamina, Mohd Nasir and Osman, Saliza Azlina (2017) Effect of etching as pre-treatment for electroless copper plating on silicon wafer. Jurnal Teknologi (Sciences & Engineering), 79 (7). pp. 61-69. ISSN 0127-9696

Misdan, Nurasyikin and Abdullah, Norfadhilatuladha and Tajuddin, Muhamad Hanis and Yusof, Norhaniza and Jaafar, Juhana and Aziz, Farhana (2017) Removal of lead(II) from aqueous solution using polyacrylonitrile/zinc oxide activated carbon nanofibers. Malaysian Journal of Analytical Sciences, 21 (3). pp. 619-626. ISSN 1394 - 2506

Miskam, Fauziah and Omar, Siti Sarah and Md Noor, Haris and Azizan, Anim Zalina and Hashim, Mohd Yussni and Ali, Norsaleha and Md Ariffin, Khadijah and Ahmed Al-Shameri, Ahmed Saleh and Hashim, Fazian (2020) University’s Entrepreneurial Ecosystem and Involvement of Students in Entrepreneurial Activities: A Case of Universiti Tun Hussein Onn Malaysia (UTHM). The Malaysian Journal of Qualitative Research, 6 (1). pp. 102-112. ISSN 1823-8521

Mivolil, D. S. and Chee, Fuei Pien and Rasmidi, Rosfayanti and Alias, Afishah and Salleh, Saafie and Mohd Salleh, Khairul Anuar and Jalal Bayar, Abi Muttaqin (2020) Gamma ray and neutron radiation effects on the electrical and structural properties of n-ZnO/p-CuGaO2 schottky diode. ECS Journal of Solid State Science and Technology, 9 (4). pp. 1-9. ISSN 2162-8769

Moayedi, Hossein and Mosallanezhad, Mansour and A. Rashid, Ahmad Safuan and Wan Jusoh, Wan Amizah and Muazu, Mohammed Abdullahi (2020) A systematic review and meta-analysis of artificial neural network application in geotechnical engineering: theory and applications. Neural Computing and Applications, 32. pp. 495-518. ISSN 0941-0643

Moayedi, Hossein and Raftari, Mehdi and Sharifi, Abolhasan and Wan Jusoh, Wan Amizah and A. Rashid, Ahmad Safuan (2020) Optimization of ANFIS with GA and PSO estimating α ratio in driven piles. Engineering with Computers (2020), 36. pp. 227-238.

Mohamad, Arifha and Abd Rahman, Normy Rafida and Ghazali, Kamarull Bahar and Megat Zambri, Wan Anis Aqilah (2021) How private sector remains sustainable during pandemic COVID-19? a case study in Malaysia. Journal of Academia, 9 (2). pp. 166-172.

Mohamad, Habib Musa and Zainorabidin, Adnan and Amaludin, Adriana Erica (2023) Stress Path Behaviour and Friction Angle Transition Due to the Cyclic Loading Effects. Civil Engineering Journal, 9 (4). pp. 895-905. ISSN 2676-6957

Mohamad, Mimi Mohaffyza and Lee, Ming Foong and Masek, Alias and Yee, Mei Heong and Nur Rahma Putra, Andika Bagus (2020) Practices of heutagogical activities among Malaysia technical university students. International Journal of Scientific & Technology Research, 9 (2). pp. 4151-4155. ISSN 2277-8616

Mohamad, Norazlinda and Mohd Affandi, Haryanti and Sohimi, Nurul Eizzaty and Mustaffa Kamal, Mohd Firdaus and Lazaro Moreno Herrera, Lazaro Moreno Herrera and Zulkifli, Rabihah Munirah and Abas, Nor Haslinda (2023) Exploring TVET Institution Directors’ Barriers in Managing Malaysian TVET Institutions-Industry Partnership. JOURNAL OF TECHNICAL EDUCATION AND TRAINING, 15 (1). pp. 265-275. ISSN 2229-8932

Mohamad, Noridah and Abdul Samad, Abdul Aziz and Goh, Wan Inn and Mendis, Priyan and Hamza, Khalifa (2016) Structural performance of recycled aggregate in CSP slab subjected to flexure load. Construction and Building Materials, 115. pp. 669-680. ISSN 0950-0618

Mohamad, Siti Shafika and Abdol Rahman, Mohd Nasrull (2018) A review on prevalence and risk factors of musculoskeletal disorders (Msds) among VDT users. International Journal of Engineering & Technology, 7 (3.2). pp. 30-34. ISSN 2227-524X

Mohamad @ Masri, Muhamad Hilmi and Nawawi, Abdul Hadi and Mohd Safian, Edie Ezwan and Ahmad Saleh, Ahmad Fawwaz (2018) House qualities characteristics relationship on house prices. Environment-Behaviour Proceedings Journal, 3 (7). pp. 1-2. ISSN 2398-4287

Mohamad Arifin, Nurliyana and Mohamad, Fariza and Hussin, Rosniza and Mohd Ismail, Anis Zafirah and Ahmad Ramli, Shazleen and Ahmad, Norazlina and Muhd Nor, Nik Hisyamudin and Sahdan, Mohd Zainizan and Mohammad Zain, Mohd Zamzuri and Izaki, Masanobu (2023) Annealing Treatment on Homogenous n-TiO2/ZnO Bilayer Thin Film Deposition as Window Layer for p-Cu2O-Based Heterostructure Thin Film. Coatings, 13 (206). pp. 1-13.

Mohamad Arifin, Nurliyana and Mohamad, Fariza and Hussin, Rosniza and Mohd Ismail, Anis Zafirah and Ahmad Ramli, Shazleen and Ahmad, Norazlina and Muhd Nor, Nik Hisyamudin and Sahdan, Mohd Zainizan and Mohammad Zain, Mohd Zamzuri and Izaki, Masanobu Annealing Treatment on Homogenous n-TiO2/ZnO Bilayer Thin Film Deposition as Window Layer for p-Cu2O-Based Heterostructure Thin Film. Coatings 2, 13 (1). pp. 1-13.

Mohamad Arifin, Nurliyana and Mohamad, Fariza and Hussin, Rosniza and Mohd Ismail, Anis Zafirah and Ramli, Shazleen Ahmad and Ahmad, Norazlina and Muhd Nor, Nik Hisyamudin and Sahdan, Mohd Zainizan and Mohammad Zain, Mohd Zamzuri and Izaki, Masanobu (2023) Annealing Treatment on Homogenous n-TiO2/ZnO Bilayer Thin Film Deposition as Window Layer for p-Cu2O-Based Heterostructure Thin Film. Coatings, 13 (206). pp. 1-13.

Mohamad Hassim, Yana Mazwin and Hassan, Norlida and Arbaiy, Nureize (2011) Web-based Dairy Cattle’s feeding allocation system. Journal of Engineering and Technology, 2. pp. 129-142. ISSN 2180-3811

Mohamad Nor, Ahmad Fateh and Sulaiman, Marizan and Abdul Kadir, Aida Fazliana and Omar, Rosli (2017) Voltage stability analysis of load buses in electric power system using adaptive neuro-fuzzy inference system (anfis) and probabilistic neural network (pnn). ARPN Journal of Engineering and Applied Sciences, 12 (5). pp. 1406-1412. ISSN 1819-6608

Mohamad Zin, Muhamad Asrulhazwan and Samiran, Nor Afzanizam and Meng-Choung Chiong, Meng-Choung Chiong and Ishak, Mohammad Zulfikar and Sahul Hamid, Muhammad Suhail (2023) Effect of Equivalence Ratio on EFB Pellet Gasification Characteristic using Thermal Arc Plasma Suction Downdraft Gasifier. Journal of Advanced Research in Applied Sciences and Engineering Technology, 30 (2). pp. 92-102. ISSN 2462-1943

Mohamed, Nor Shamsiah and Koh, Ching Theng (2018) Preparation of siam weed extracts. Journal of Mechanical Engineering, 5 (4). pp. 268-274. ISSN 2550-164X

Mohamed, R. M. and Al‑Gheethi, A. A. and J., Noramira and Chan, C. M. and M. K., Amir Hashim and M., Sabariah (2018) Effect of detergents from laundry greywater on soil properties: a preliminary study. Applied Water Science, 8 (16). pp. 1-7. ISSN 2190-5495

Mohamed, Radin and Abdulrahman, Adeleke and Sainudin, Muhammad Shabery bin and Bakar, Siti Asmah and Mohd Kassim, Amir Hashim and Al-Gheethi, Adel (2018) Optimization of ceramic waste filter for bathroom greywater treatment using central composite design (CCD). Journal of Environmental Chemical Engineering, 6 (2). pp. 1578-1588. ISSN 2213-3437

Mohamed Ali, Riyaz Ahmad and Mita, Daiki and Espulgar, Wilfred and Saito, Masato and Nishide, Masayuki and Takamatsu, Hyota and Yoshikawa, Hiroyuki and Tamiya, Eiichi (2020) Single cell analysis of neutrophils NETs by microscopic LSPR imaging system. Micromachines, 11 (1). pp. 1-15. ISSN 2072-666X

Mohamed Zahidi, Musa and Mamat, Mohamad Hafiz and A Subk, A Shamsul Rahimi and Abdullah, Mohd Hanapiah and Hassan, Hamizura and Ahmad, Mohd Khairul and Abu Bakar, Suriani and Mohamed, Azmi and Ohtani, Bunsho (2023) Formation of a Nanorod-Assembled TiO2 ActinomorphicFlower-like Microsphere Film via Ta Doping Using a Facile Solution Immersion Method for Humidity Sensing. Nanomaterials, 13 (256). pp. 1-20.

Mohamed Zahidi, Musa and Mamat, Mohamad Hafiz and A Subki, A Shamsul Rahimi and Abdullah, Mohd Hanapiah and Hassan, Hamizura and Ahmad, Mohd Khairul and Abu Bakar, Suriani and Mohamed, Azmi and Bunsho Ohtani, Bunsho Ohtani (2023) Formation of a Nanorod-Assembled TiO2 ActinomorphicFlower-like Microsphere Film via Ta Doping Using a Facile Solution Immersion Method for Humidity Sensing. Nanomaterial. pp. 1-20.

Mohamed Zahidi, Musa and Mamat, Mohamad Hafiz and A Subki, A Shamsul Rahimi and Abdullah, Mohd Hanapiah and Hassan, Hamizura and Ahmad, Mohd Khairul and Abu Bakar, Suriani and Mohamed, Azmi and Ohtani, Bunsho (2023) Formation of a Nanorod-Assembled TiO2 ActinomorphicFlower-like Microsphere Film via Ta Doping Using a Facile Solution Immersion Method for Humidity Sensing. Nanomaterials, 13 (256). pp. 1-18.

Mohammad, Siti Fairus and Ahmad, Sufizar and Abdul rahman, Hamimah and Muchtar, Andanastuti (2018) Elucidation of morphological behavior on the samarium strontium cobaltite carbonate composite cathode for LTSOFC. International Journal of Current Science, Engineering & Technology, 1 (1). pp. 342-347. ISSN 2581-4311

Mohammad Arafat, Mohammad Arafat and Ishak, Izuan Amin and Mohammad, Ahmad Faiz and Khalid, Amir and Mohmad Jaát, Md. Norrizam and Yasak, Mohd Fuad (2023) Effect of Reynolds number on the wake of a Next-Generation High-Speed Train using CFD analysis. CFD Letters, 15 (1). pp. 76-87. ISSN 2180-1363

Mohammad Arafat, Mohammad Arafat and Izuan Amin Ishak, Izuan Amin Ishak and Mohammad, Ahmad Faiz and Khalid, Amir and Mohmad Jaát, Md. Norrizam and Mohd Fuad Yasak, Mohd Fuad Yasak (2023) Effect of Reynolds number on the wake of a Next-Generation High-Speed Train using CFD analysis. CFD Letters, 15 (1). pp. 1-12. ISSN 2180-1363

Mohammad Razi, Mohd Adib and Al-Gheethi, Adel and Z. A, Izzatul Ashikin (2018) Removal of heavy metals from textile wastewater using sugarcane bagasse activated carbon. International Journal of Engineering & Technology, 7. pp. 112-115. ISSN 2227-524X

Mohammad Razi, Mohd Adib and Mohd Hishammudin, Mimi Nur Attahirah and Abd Rahim, Muhammad Amirza and Mohd Salleh, Nur Aqila Hani (2018) A review of agricultural waste activated carbon and effect on adsorption parameters. International Journal of Environmental Engineering, 9 (3/4). pp. 301-322. ISSN 1756-8463

Mohammed, Abdulrahman A. B. A. and Hasan, Zaimah and Omran, Abdoulhdi A. Borhana and M. Elfaghi, Abdulhafid and Khattak, M.A. and Ilyas, R. A. and Sapuan, S. M. (2023) Effect of Various Plasticizers in Different Concentrations on Physical, Thermal, Mechanical, and Structural Properties of Wheat Starch-Based Films. Polymers 2, 15 (63). pp. 1-21.

Mohammed, Abdulrahman A.B.A. and Hasan, Zaimah and Omran, Abdoulhdi A. Borhana and M. Elfaghi, Abdulhafid and Hassan Ali, Yasir and Akeel, Norie A.A. and Ilyas, R.A. and Sapuan, S.M. (2023) Effect of sugar palm fibers on the properties of blended wheat starch/polyvinyl alcohol (PVA) -based biocomposite films. Journal of Materials Research and Technology, 24. pp. 1043-1055.

Mohammed, Akmal Nizam and Ismail, Farzad (2014) Study of an entropy-consistent Navier–Stokes flux. International Journal of Computational Fluid Dynamics, 27 (1). pp. 1-14. ISSN 1029-0257

Mohammed, Ali Basim and Mohd Ariff, Mohd Aifaa and Ramli, Sofia Najwa (2020) Power quality improvement using dynamic voltage restorer in electrical distribution system: an overview. Indonesian Journal of Electrical Engineering and Computer Science, 17 (1). pp. 86-93. ISSN 2502-4752

Mohammed, Mazin Abed and Abd Ghani, Mohd Khanapi and Arunkumar, N. and A. Mostafa, Salama and Abdullah, Mohamad Khir and Burhanuddina, M.A. (2018) Trainable model for segmenting and identifying Nasopharyngeal carcinoma. Computers and Electrical Engineering, 71 (4). pp. 372-387. ISSN 0045-7906

Mohammed, Mazin Abed and Abd Ghani, Mohd Khanapi and Arunkumar, N. and Obaid, Omar Ibrahim and A. Mostafa, Salama and Musa Jaber, Mustafa and Burhanuddin, M.A. and Mohammed Matar, Bilal and Abdullatif, Saif Khalid and Ahmed Ibrahim, Dheyaa (2018) Genetic case-based reasoning for improved mobile phone faults diagnosis. COMPUTERS & ELECTRICAL ENGINEERING, 71. pp. 212-222. ISSN 0045-7906

Mohammed, Mohammed Ishaq and Sulaiman, Noralfishah and Adamu, Dahiru (2018) Dimensionality and reliability of the determinants of reverse mortgage use intention. International Electronic Scientific Journal, 4 (2). pp. 1013-1023. ISSN 2413-9009

Mohammed Al-Sahari, Mohammed Al-Sahari and Al-Gheethi, Adel Ali and Radin Mohamed, Radin Maya Saphira and G. Yashni, G. Yashni and N. Vo, Dai-Viet and Ismail, Norli (2022) Microbial fuel cell systems; developments, designs, efficiencies, and trends: A comparative study between the conventional and innovative systems. Chemosphere. pp. 1-15. ISSN 0045-6535

Mohammed Alzoraiki, Mohammed Alzoraiki and Abd Rahman Ahmad, Abd Rahman Ahmad and Ali Ahmed Ateeq, Ali Ahmed Ateeq and Gehad Mohammed Ahmed Naji, Gehad Mohammed Ahmed Naji and Qais Almaamari, Qais Almaamari and Baligh Ali Hasan Beshr, Baligh Ali Hasan Beshr (2023) Impact of Teachers’ Commitment to the Relationship between Transformational Leadership and Sustainable Teaching Performance. Sustainability, 15. pp. 1-16.

Mohammed Aswad, Firas and Ahmed, Ali Mohammed Saleh and Ali Majeed Alhammadi, Nafea Ali Majeed Alhammadi and Khalaf, Bashar Ahmad and Mostafa, Salama A. (2023) Deep learning in distributed denial-ofservice attacks detection method for Internet of Things networks. Journal of Intelligent Systems. pp. 1-13. ISSN 20220155

Mohammed Aswad, Firas and Ahmed, Ali Mohammed Saleh and Majeed Alhammadi, Nafea Ali and Ahmad Khalaf, Bashar and A. Mostafa, Salama (2023) Deep learning in distributed denial-ofservice attacks detection method for Internet of Things networks. Journal of Intelligent Systems. pp. 1-13.

Mohammed Aswad, Firas and Mohammed Saleh Ahmed, Ali and Ali Majeed Alhammadi,, Nafea and Ahmad Khalaf, Bashar and Mostafa, Salama A. (2023) Deep learning in distributed denial-ofservice attacks detection method for Internet of Things networks. Journal of Intelligent Systems, 32. pp. 1-13. ISSN 20220155

Mohammed Aswad, Firas and Saleh Ahmed, Ali Mohammed and Ali Majeed Alhammadi, Nafea and Ahmad Khalaf, Bashar and A. Mostafa, Salama (2023) Deep learning in distributed denial-ofservice attacks detection method for Internet of Things networks. Journal of Intelligent Systems. pp. 1-13.

Mohammed Aswad, Firas and Saleh Ahmed,, Ali Mohammed and Ali Majeed Alhammadi, Nafea and Ahmad Khalaf, Bashar and A. Mostafa, Salama (2023) Deep learning in distributed denial-ofservice attacks detection method for Internet of Things networks. Journal of Intelligent Systems. pp. 1-13.

Mohanad Al-Ghriybah, Mohanad Al-Ghriybah and Djamal Hissein Didane, Djamal Hissein Didane (2023) DEVELOPMENT OF WIND-SOLAR MAPS IN AQABA, JORDAN AS POTENTIAL SOURCES FOR POWER GENERATION. Journal of Applied Engineering Science, 21 (1). pp. 212-223. ISSN 1451-4117

Mohd, Suzila and Brahim, Juliana and Ahmad Latiffi, Aryani and Fathi, Mohamad Syazli and Harun, Aizul Nahar (2017) Developing building information modelling (BIM) implementation model for project design team. Malaysian Construction Research Journal, 1 (1). pp. 71-83. ISSN 1985-3807

Mohd Adnan, Raudah and Wan Yusoff, Wan Fauziah and Ghazali, Norliza (2018) The role of social entrepreneurship in Malaysia: a preliminary analysis. Advanced Science Letters, 24 (5). pp. 3264-3269. ISSN 1936-7317

Mohd Akip Tan, S. N. and Md Dan, M. F. and Edy Tonnizam, M. and Saad, R. and Madun, Aziman and Hazreek, Z. A. M. (2018) Interpretation of 2D resistivity with engineering characterization of subsurface exploration in Nusajaya Johor, Malaysia. Journal of Physics: Conference Series, 995. pp. 1-6. ISSN 1742-6588

Mohd Ali, A. M. and Ambar, R. and M. Wahi, A. J. and Abdul Jamil, M. M. (2011) Development of master-slave robotic hand for Mirror Visual Feedback (MVF) therapy. Journal of Engineering Technology, 1. pp. 27-32. ISSN 2231-8798

Mohd Ali, A. M. and M. Wahi, A. J. and Ambar, R. and Abdul Jamil, M. M. (2011) Development of artificial hand gripper by using microcontroller. International Journal of Integrated Engineering, 3 (2). pp. 47-54.

Mohd Ariff, Mohd Aifaa and Abhinav, Kumar Singh and Bikash, Chandra Pa (2015) Estimating dynamic model parameters for adaptive protection and control in power system. IEEE Transactions On Power Systems, 30 (2). pp. 829-839. ISSN 1558-0679

Mohd Aris, Nor Afiqah and Jamaian, Siti Suhana (2023) Background subtraction challenges in motion detection using Gaussian mixture model: a survey. Background subtraction challenges in motion detection using, 12 (3). pp. 1007-1018. ISSN 2252-8938

Mohd Aris, Nor Afiqah and Jamaian, Siti Suhana (2023) Background subtraction challenges in motion detection using Gaussian mixture model: a survey. IAES International Journal of Artificial Intelligence (IJ-AI), 12 (3). pp. 1007-1018. ISSN 2252-8938,

Mohd Aris, Nor Afiqah and Jamaian, Siti Suhana and Mohd Sadiq, Ummal Aisha Farhana and Mustaffa, Nur Maisarah and Mohamed Sunar, Norshuhaila and Zulkifli, Fathul Hakim (2019) Effect of selective parameters values towards microalgae growth by an advanced hybrid mathematical model. Journal of Adv Research in Dynamical & Control Systems, 11 (12). pp. 1-12. ISSN 1943023X

Mohd Asharuddin, Syazwani and Othman, Norzila and Mohd Zin, Nur Shaylinda and Tajarudin, Husnul Azan and Md. Din, Mohd Fadhil and Kumar, Vicky (2018) Performance assessment of cassava peel starch and alum as dual coagulant for turbidity removal in dam water. International Journal of Integrated Engineering, 10 (4). pp. 185-192. ISSN 2229-838X

Mohd Azaman, N.A. and Abd Ghafar, N.H. and Azhar, A.F. and Fauzi, A. A. and Ismail, H. A. and Syed Idrus, S. S. and Mokhjar, S. S. and Abd Hamid, F.F. (2018) Investigation of concrete floor vibration using heel-drop, test. Journal of Physics: Conference Series, 995. pp. 1-8. ISSN 1742-6588

Mohd Faiz, Nur Sofurah and Mohamed, Maziana (2022) Internationalisation of curriculum delivery: complexities of english as an instructional language in a non-english culture. Asian Journal of University Education (AJUE), 18 (1). pp. 279-289.

Mohd Fuzi, Siti Fatimah Zaharah and Md Illias, Rosli and Ghazali, Nazlee Faisal and Ismail, Ahmad Fauzi and Che Man, Rohaida (2015) Effects of the immobilization of recombinant Escherichia coli on cyclodextrin glucanotransferase (cgtase) excretion and cell viability. Biochemical Engineering Journal, 98 (15). pp. 91-98. ISSN 1369703X

Mohd Hasan, Mohd Rosli and You, Zhanping and Mohd Satar, Mohd Khairul Idham and Mohd Warid, Muhammad Naqiuddin and Mohd Kamaruddin, Nurul Hidayah and Poovaneshvaran, Sharvin (2019) Rheological and mechanical performance of asphalt binders and mixtures incorporating CaCO3 and LLDPE. Organic Polymer Material Research, 1 (1). pp. 10-21. ISSN 2164-5736

Mohd Ismail, Nur Aisyah and Abdullah, Norazlin and Muhammad, Norhayati (2018) Effect of microwave-assisted processing on quality characteristics of pineapple jam. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 42 (1). pp. 24-30. ISSN 2289-7879

Mohd Jasni, Mohd Safuwan and Samin, Reza Ezuan and Ibrahim, Babul Salam Kader (2012) Biological inspired inspection underwater robot (SNAKEY). International Symposium on Robotics and Intelligent Sensors 2012 (IRIS 2012), 41. pp. 1058-1064.

Mohd Khalid, Muhamad Azrin and Ismail, Azzura (2017) Mitigation of corrosion attack on carbon steel coated cermet alloy in different anion contents. AIP Conference Proceedings, 1901. pp. 120003-1. ISSN 978-0-7354-1589-8

Mohd Lokman, Syiham and Chuah, Chai Wen and Ab. Rahman, Nurul Hidayah Binti and A. Hamid, Isredza Rahmi Binti (2018) A study of caesar cipher and transposition cipher in jawi messages. Advanced Science Letters, 24 (3). pp. 1651-1655. ISSN 1936-6612

Mohd Masirin, Mohd Idrus and Abdul Hamid, Norashikin and Zainorabidin, Adnan and Mahmood, Che Hasnah and Abdul Rahman, Akmal and Abdul Rahman, Raha and Mustapa, Mohamad Sukri (2020) Education and communicating positive young minds in creating sustainable environment and development. International Journal of Entrepreneurship and Business Development, 3 (4). pp. 494-497. ISSN 2597-4750

Mohd Nahar, Nur Farah Aqilah and Ab Rahman, Nurul Hidayah and Mohammad, Kamarudin Malik (2018) E-Raser: file shredder application with content replacement by using random words function. International Journal on Informatics Visualization, 2 (4-2). pp. 313-317. ISSN 2549-9904

Mohd Nizam, Muhammad Syazaamirul and Rosly, Nurhayati (2019) The development of flight training operation for Tanjung Laboh airport. Journal of Aviation and Aerospace Technology, 1 (2). pp. 1-9. ISSN 2682-7433

Mohd Noor, Nur Nabilah and Kamaruzaman, Nur Hazirah and Al-Gheethi, Adel and Radin Mohamed, Radin Maya Saphira and Hossain, Md. Sohrab (2023) Degradation of antibiotics in aquaculture wastewater by bio-nanoparticles: A critical review. Ain Shams Engineering Journal. pp. 1-13.

Mohd Noor, Nur Nabilah and Kamaruzaman, Nur Hazirah and Al-Gheethi, Adel and Radin Mohamed, Radin Maya Saphira and Sohrab Hossain, Md. (2023) Degradation of antibiotics in aquaculture wastewater by bio-nanoparticles: A critical review. Ain Shams Engineering Journal.

Mohd Nor, M. K. and Ho, C. S. and Ma’at, N. and Kamarulzaman, M. F. (2020) Modelling shock waves in composite materials using generalised orthotropic pressure. Continuum Mechanics and Thermodynamics, 32. pp. 1217-1229. ISSN 0935-1175

Mohd Nor, M. K. and Ma’at, N. and Ho, C. S. (2018) Modeling dynamic anisotropic behaviour and spall failure in commercial aluminium alloys AA7010. Journal of Dynamic Behavior of Materials, 4. pp. 201-210. ISSN 2199-7446

Mohd Nor, Mohd Khir and Vignjevic, Rade and Campbell, James (2013) Modelling of shockwave propagation in orthotropic materials. Applied Mechanics and Materials, 315. pp. 557-561. ISSN 1660-9336

Mohd Norzam, Muhammad Nur Aliff and Karjanto, Juffrizal and Md Yusof, Nidzamuddin and Hasan, Muhammad Zahir and Zulkifli, Abd Fathul Hakim and Ab Rashid, Ahmad Azad (2022) Analysis of user’s comfort on automated vehicle riding simulation using subjective and objective measurements. Automotive Experiences, 5 (2). pp. 238-250. ISSN 2615-6202

Mohd Razali, Siti Noor Asyikin and Engku Abu Bakar, Engku Muhammad Nazri and Ku Mahamud, Ku Ruhana and Arbin, Norazman and Rusiman, Mohd Saifullah (2018) Malaysian menu planning model using Self-Adaptive Hybrid Genetic Algorithm (SHGA). Far East Journal of Mathematical Sciences (FJMS), 103 (1). pp. 171-190. ISSN 0972-0871

Mohd Salleh, Kahirol and Sulaiman, Nor Lisa and Gloeckner, Gene (2023) Exploring Test Concept and Measurement Through Validity and Reliability Process in TVET Research: Guideline for The Novice Researcher. JOURNAL OF TECHNICAL EDUCATION AND TRAINING, 15 (1). pp. 257-264. ISSN 2229-8932

Mohd Sufian, Amirul Azan and Othman, Siti Amira and Hasrin, Noradriana Izzaty and Harun, Siti Nur Idayu (2020) Future of pineapple leaf paper: a review. International Journal of Engineering Advanced Research, 1 (2). pp. 1-5. ISSN 2710-7167

Mohd Sukri, Nurul Syafuhah and Muhammad, Norhayati and Abdul Rahim, Nur Fazira (2022) Phytochemical contents and antioxidant properties of polyherbal effervescent tablets formulated with different effervescent agents. Research Journal of Chemistry and Environment, 26 (3). pp. 1-7.

Mohd Yunus, Mohd Amin and Mohd Salleh, Mohd Najib and Lubis, Muharman and Omar, Nurul Aswa and Mustapha, Aida (2020) Translating Quran verses result using indexed references. Academia of Information Computing Research, 1 (1). pp. 10-21. ISSN 2716-6465

Mohd Zin, Nur Ariffin and Asmuni, Hishammuddin and Abdul Hamed, Haza Nuzly and M. Othman, Razib and Kasim, Shahreen and Hassan, Rohayanti and Zakaria, Zalmiyah and Roslan, Rosfuzah (2018) Contact lens classification by using segmented lens boundary features. Indonesian Journal of Electrical Engineering and Computer Science, 11 (3). pp. 1129-1135. ISSN 2502-4752

Mohd Zin, Nur Shaylinda and Abdul Aziz, Hamidi and Mohd Adlan, Nordin and Ariffin, Azlan and Yusoff, Mohd Suffian (2012) Understanding the use of chemical and natural coagulants in the coagulation process: a review. Caspian Journal of Applied Sciences Research, 2. pp. 300-308.

Mohd Zuki, Sharifah Salwa and Shahidan, Shahiron and Choong, Kok Keong and Jayaprakash, J. (2018) Effectiveness of repair method using hybrid fiber reinforced polymer fabric on concrete-filled double skin steel tubular columns exposed to fire. Malaysian Construction Research Journal (MCRJ), 4 (2). pp. 239-250. ISSN 1985-3807

Mohd,, Rosmawanie and Mohamed, Radin and Al-Gheethi, Adel and Pahazri, Fadzilla and Hashim, Amir and Mohd Zin, Shaylinda (2018) Sequestering of pollutants from public market wastewater using Moringa oleifera and Cicer arietinum flocculants. Journal of Environmental Chemical Engineering, 6 (2). pp. 2417-2428. ISSN 2213-3437

Mohd. Muji, Siti Zarina and Abdul Rahim, Ruzairi and Rahiman, Mohd Hafiz Fazalul and Chua, King Lee and Amirulah, Rahman and Ambar, Radzi (2017) Optical tomography verification for single and mixed modalities. Sensors and Actuators A: Physical, 253 (NIL). pp. 10-26. ISSN 0924-4247

Mohid, Z. and Rahim, E.A. (2018) Chip pattern, burr and surface roughness in laser assisted micro milling of Ti6Al4V using micro ball end mill. Journal of Mechanical Engineering and Sciences, 12 (1). pp. 3410-3430. ISSN 2289-4659

Mohmad Hassim, Yana Mazwin and Ghazali, Rozaida (2012) Training a functional link neural network using an artificial bee colony for solving a classification problems. JOURNAL OF COMPUTING, 4 (9). pp. 110-115.

Mohmad Hassim, Yana Mazwin and Ghazali, Rozaida (2012) An approach to improve functional link neural network training using modified artificial bee colony for classification task. Jurnal Teknologi Maklumat dan Multimedia Asia-Pasifik, 2 (2). pp. 63-71.

Mohmad Hassim, Yana Mazwin and Ghazali, Rozaida (2012) An approach to improve functional link neural network training using modified artificial bee colony for classification task. ASIA-PACIFIC JOURNAL OF INFORMATION TECHNOLOGY AND MULTIMEDIA, 2 (2). pp. 63-71. ISSN 2289-2192

Mokhatar, Shahrul Niza and Abdullah, Redzuan (2011) Computational analysis of reinforced concrete slabs subjected to impact loads. International Journal of Integrated Engineering, 4 (2). pp. 70-76.

Mokhtar, Nurfarah Barizah and Mohd Nawi, Nazri (2022) Sistem pengurusan kedai alatan komunikasi YY Photo Studio dan Teleshop. Applied Information Technology And Computer Science, 3 (1). pp. 1087-1102.

Mondal, Mithun and Didane, Djamal Hissein and Ali, Alhadj Hisseine Issaka and Manshoor, Bukhari (2022) Technical assessment of wind energy potentials in Bangladesh. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 96 (2). pp. 10-21.

Mondal, Mithun and Didane, Djamal Hissein and Ali, Alhadj Hisseine Issaka and Manshoor, Bukhari (2022) Wind energy assessment as a source of power generation in Bangladesh. Journal of Advanced Research in Applied Sciences and Engineering Technology, 26 (3). pp. 16-22.

Mondal, Mithun and Didane, Djamal Hissein and Issaka Ali, Alhadj Hisseine and Manshoor, Bukhari (2022) Technical assessment of wind energy potentials in Bangladesh. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 96 (2). pp. 10-21.

Mubarik, Mobashar and Raja Mohd Rasi, Raja Zuraidah and Mubarak, Muhammad Faraz and Ashraf, Rashid (2021) Impact of blockchain technology on green supply chain practices: evidence from emerging economy. Management of Environmental Quality, 14 (1).

Muhamad Sanusi, Amanina and Puteh, Saifullizam and Hassan, Nur Farha (2018) Research needs: issues and problems of talent working graduates university programs of engineering and technology. Advanced Science Letters, 24 (11). pp. 8051-8055. ISSN 1936-6612

Muhammad, Norhayati and Hashim, Nor Haslina and Khairuddin, Nur Ain and Yusof, Hasliza and Jusoh, Samsiah and Abas, Azlan and A. Talip, Balkis and Abdullah, Norazlin and Din, Laily (2018) Identification of most tolerant lichen species to vehicular traffic’s pollutants: a case study at Batu Pahat. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 42 (1). pp. 57-64. ISSN 2289-7879

Muhammad, Nur Ainnaa Mardhiah and Awang, Noor Azura and Basri, Hatijah (2023) Recent advancements review in zinc oxide and titanium dioxide saturable absorber for ultrafast pulsed fiber laser. Optik, 283. pp. 1-16.

Muhammad, Nur Ainnaa Mardhiah and Awang, Noor Azura and Nik Mahmud, Nik Noor Haryatul Eleena and Zalkepali, Noor Ummi Hazirah Hani and Muhamad Zamri, Ain Zamira and Basri, Hatijah and Rasli, Nurul Izwanie (2023) Biosynthesized zinc oxide and titanium dioxide nanoparticles by aloe vera extract for tunable Q-switched application. Optical Fiber Technology, 77. pp. 1-8.

Muhammad Akram, Muhammad Akram and Yaqoob, Naveed and Kavikumar, Jacob (2014) Interval-valued fuzzy ku-ideals of ku-algebras. International Journal of Pure and Applied Mathematics, 92 (3). pp. 335-349. ISSN 1311-8080

Muhammad Nasir, Mohd Nizar and Mohd Nordin, Ili Najaa Aimi and Mohd Faudzi, Ahmad Athif and Muftah, Mohamed Naji and Mhd Yusoff, Mohd Akmal and Mohamaddan, Shahrol (2023) Modeling and Position Control of Fiber Braided Bending Actuator Using Embedded System. Applied Sciences, 13 (3170). pp. 1-16.

Muhammad Nasir, Mohd Nizar and Mohd Nordin, Najaa Aimi and Mohd Faudzi, Ahmad Athif and Muftah, Mohamed Naji and Mhd Yusoff, Mohd Akmal and Mohamaddan, Shahrol (2023) Modeling and Position Control of Fiber Braided Bending Actuator Using Embedded System. Applied Sciences, 11 (3170). pp. 1-15.

Muhammad Sam’An, Muhammad Sam’An and Yosza Dasri, Yosza Dasri and Chandrasekar Ramasamy, Chandrasekar Ramasamy and Nazarudin Bujang, Nazarudin Bujang and Yahya Nur Ifriza, Yahya Nur Ifriza (2023) Improved Segregated Advancement (I-SA): a new method for solving full triangular fuzzy transportation problems. INTERNATIONAL JOURNAL OF MANAGEMENT SCIENCE AND ENGINEERING MANAGEMENT. pp. 1-12.

Muhammad Sam’An, Muhammad Sam’An and Yosza Dasril, Yosza Dasril and Chandrasekar Ramasamy, Chandrasekar Ramasamy and Bujang, Nazarudin and Yahya, Nur Ifriza (2023) Improved Segregated Advancement (I-SA): a new method for solving full triangular fuzzy transportation problems. INTERNATIONAL JOURNAL OF MANAGEMENT SCIENCE AND ENGINEERING MANAGEMENT. pp. 1-12.

Muhammed Asri, Noor Athirah and Ibrahim, Rosziati (2021) Requirements analysis for transformation of urban district into smart city-a case study of Sri Gading. International Journal of Advanced Trends in Computer Science and Engineering. ISSN 2278-3091

Muniappan, Thiiban and Abd Warif, Nor Bakiah and Ismail, Ahsiah and Mat Abir, Noor Atikah (2023) An Evaluation of Convolutional Neural Network (CNN) Model for Copy-Move and Splicing Forgery Detection. INTELLIGENT SYSTEMS AND APPLICATIONS IN ENGINEERING, 11 (1). pp. 730-740. ISSN 2147-679921

Musa, Rusnifaezah and Hashim, Norashidah and Rashid, Umi Kartini and Naseruddin, Juzaimi (2017) Accelerating startups: the role of government assistance programs and entrepreneurial orientation. International Journal of Economic Research, 14 (15). p. 131. ISSN 0972-9380

Musa, Sabariah and Mohamad, Nur Huda (2018) Surface morphological characteristics on unmodified cucurbita as a biosorbent potential for chloride and sulphate. International Journal of Latest Research in Engineering and Technology (IJLRET), 4 (8). pp. 119-126. ISSN 2454-5031

Musa, Sabariah and Ng, Le Bin and Abduh Algheethi, Adel Ali Saeed and Zakaria, Nor Azazi and Lau, Tze Liang (2020) Groundwater analysis for unconfined and clayey layer by using response surface methodology. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 69 (2). pp. 168-176. ISSN 2289-7879

Muslim, Much Aziz and Nikmah, Tiara Lailatul and Agustina Pertiwi b, Dwika Ananda and Subhan, Subhan and Jumanto, Jumanto and Yosza Dasril, Yosza Dasril and Iswanto, Iswanto (2023) New model combination meta-learner to improve accuracy prediction P2P lending with stacking ensemble learning. Intelligent Systems with Applications, 18. pp. 1-8.

Muslim, Much Aziz and Nikmah, Tiara Lailatul and Dwika Ananda Agustina Pertiwi, Dwika Ananda Agustina Pertiwi and Subhan, Subhan and Jumanto, Jumanto and Yosza Dasril, Yosza Dasril and Iswanto, Iswanto (2023) New model combination meta-learner to improve accuracy prediction P2P lending with stacking ensemble learning. Intelligent Systems with Applications, 18. pp. 1-8.

Muslim, Much Aziz and Nikmah, Tiara Lailatul and Dwika Ananda Agustina Pertiwi b, Dwika Ananda Agustina Pertiwi b and Subhan b, Subhan b and Jumanto, Jumanto and Nikmah, Tiara Lailatul and Agustina Pertiwi, Dwika Ananda and Iswanto, Iswanto (2023) New model combination meta-learner to improve accuracy prediction P2P lending with stacking ensemble learning*. Intelligent Systems with Applications, 18. pp. 1-8.

Muslim, Much Aziz and Tiara Lailatul Nikmah, Tiara Lailatul Nikmah and Dwika Ananda Agustina Pertiwi, Dwika Ananda Agustina Pertiwi and Subhan, Subhan and Jumanto, Jumanto and Yosza Dasril, Yosza Dasril and Iswanto, Iswanto (2023) New model combination meta-learner to improve accuracy prediction P2P lending with stacking ensemble learning*. Intelligent Systems with Applications, 18. pp. 1-8.

Mustafa, Ali Abdulqader and Noranai, Zamri and Imran, Ahmed Abdulnabi (2021) Solar absorption cooling systems: a review. Journal of Thermal Engineering, 7 (4). pp. 970-983.

Mustafa, Mohd Syafiq Syazwan and Zakaria, Anies Faziehan and Che’Om, Siti Shaidatul Zarifah and Mohamed Yusop, Fatimah and Yunus, Faizal Amin Nur and Abdul Rahman, Mohammad Ashraf (2022) Predicting job satisfaction of Malaysian mechanical ventilation and air conditioning maintenance personnel in the oil and gas sector. Humanities and Social Sciences Letters, 10 (3). pp. 256-267. ISSN 2312-5659

Mustafa, Siti Aisyah and Ramlee, Roslily and Kassim, Salina (2017) Economic forces and Islamic stock market: empirical evidence from Malaysia. Asian Journal of Business and Accounting, 10 (1). pp. 45-85. ISSN 2180-3137

Mustafa Sulaiman, Dawlat and Abdulazeez, Adnan Mohsin and Asaad Zebari, Dilovan and Qader Zeebaree, Diyar and A. Mostaf, Salama and Saleem Sadiq, Shereen (2023) An Attention-Based Deep Regional Learning Model for Enhanced Finger Vein Identification. Traitement du Signal, 39 (6). pp. 1991-2002.

Mydin, Md Azree Othuman and Khalid, Mohamad Sukeri and Omar, Roshartini and Mohammed Najm, Hadee and Abdal Qaidi, Shaker Mahmood and Awoyera, Paul Oluwaseun (2023) Durability Properties of Lightweight Foamed Concrete Reinforced With ‘Musa Acuminate’ Fibre. Journal of Advanced Research in Applied Sciences and Engineering Technology, 29 (2). pp. 145-158. ISSN 2462-1943

Mydin, Md Azree Othuman and Khalid, Mohamad Sukeri and Omar, Roshartini and Mohammed Najm, Hadee and Abdal Qaidi, Shaker Mahmood and Awoyera, Paul Oluwaseun (2023) Influence of Crisscross Fiberglass Strip on Axial Compressive Strength of Lightweight Foamed Concrete. Journal of Advanced Research in Applied Sciences and Engineering Technology, 29 (2). pp. 135-144. ISSN : 2462-1943

Mydin, Md Azree Othuman and Khalid, Mohamad Sukeri and Omar, Roshartini and Mohammed Najm, Hadee and Mahmood Abdal Qaidi, Shaker and Awoyera, Paul Oluwaseun (2023) Durability Properties of Lightweight Foamed Concrete Reinforced With Musa Acuminate’ Fibre. Journal of Advanced Research in Applied Sciences and Engineering Technology, 29 (2). pp. 1-13. ISSN 2462-1943

Mydin, Md Azree Othuman and Khalid, Mohamad Sukeri and Omar, Roshartini and Najm, Hadee Mohammed and Mahmood Abdal Qaidi, Shaker and Paul Oluwaseun Awoyera, Paul Oluwaseun Awoyera (2023) Durability Properties of Lightweight Foamed Concrete Reinforced With ‘Musa Acuminate’ Fibre. Journal of Advanced Research in Applied Sciences and Engineering Technology, 29 (2). pp. 145-158. ISSN 2462-1943

Mydin, Md Azree Othuman and Khalid, Mohamad Sukeri and Omar, Roshartini and ohammed Najm, Hadee and Abdal Qaidi, Shaker Mahmood and Awoyera, Paul Oluwaseun (2023) Influence of Crisscross Fiberglass Strip on Axial Compressive Strength of Lightweight Foamed Concrete. Journal of Advanced Research in Applied Sciences and Engineering Technology, 29 (2). pp. 1-10. ISSN 2462-1943

Mydin, Md Azree Othuman and Mohamad, Noridah and Johari, Izwan and Abdul Samad, Abdul Aziz (2018) Determination of bending and axial compression young’s modulus of cellular mortar exposed to high temperatures. International Journal of Engineering and Technology, 7 (2.23). pp. 99-102. ISSN 2227-524X

N. ALYANI ZAINOL ABIDIN, N. ALYANI ZAINOL ABIDIN and F. KORMIN, F. KORMIN and N. AKHMA ZAINOL ABIDIN, N. AKHMA ZAINOL ABIDIN and M.F. ABU BAKAR, M.F. ABU BAKAR and ADE CHANDRA IWANSYAH, ADE CHANDRA IWANSYAH (2023) Anti-tyrosinase Activities of Curcumin-Chitosan Gold Nanoparticles Synthesized from Beetle (Oryctes rhinoceros). Asian Journal of Chemistry, 35 (1). pp. 70-82.

Nagarajan, D. and Lathamaheswari, M. and Kavikumar, J. and Deenadayalan, E. (2019) Interval type-2 fuzzy logic washing machine. International Journal of Fuzzy Logic and Intelligent Systems, 19 (4). pp. 223-233. ISSN 1598-2645

Nagentrau, M. and Mohd Tobi, A.L. and Sambu, M. and Jamian, S. (2019) The influence of welding condition on the microstructure of WC hardfacing coating on carbon steel substrate. International Journal of Refractory Metals and Hard Materials, 82. pp. 43-57. ISSN 0263-4368

Naim Kasiran, Mohd Amirul and Ponniran, Asmarashid and Yatim, Mohd Hafizie and Itoh, Jun-ichi (2020) Evaluation of high power density achievement of optimum 4-level capacitor-clamped DC–DC boost converter with passive lossless snubber circuit by using Pareto-Front method. IET Power Electronics, 13 (1). pp. 40-49. ISSN 1755-4543

Najeeb, M.I. and Sultan, M.T.H. and Andou, Yoshito and Shah, A.U.M and Eksiler, Kubra and Jawaid, M. and Ariffin, A.H. (2020) Characterization of silane treated Malaysian Yankee Pineapple AC6 leaf fiber (PALF) towards industrial applications. Journal of Material Research and Technology, 9 (3). pp. 3128-3139. ISSN 2238-7854

Narong, O.L.C. and Chee, Kiong Sia and See, Khee Yee and Pauline, Ong and Zainudin, Azlan and Muhd Nor, Nik Hisyamudin and Hassan, Mohd Fahrul (2018) Optimisation of EMI shielding effectiveness: mechanical and physical performance of mortar containing POFA for plaster work using Taguchi Grey method. Construction and Building Materials, 176. pp. 509-518. ISSN 0950-0618

Nashar, Norfatin Afiqah and Jumintono, Jumintono and Pudyastuti, Rita Rena and Etty Handayani, Etty Handayani and Indarto, Muhammad Roni and Jaka Sunardi, Jaka Sunardi and Retnowati, Nurcahyani Dewi and Sawitri, Sicilia (2020) Increasing understanding of general knowledge of plastics with video-based learning. Universal Journal of Educational Research, 8 (11B). pp. 5913-5917.

Nashiha Chalvi Syahra, Nashiha Chalvi Syahra and Iwantono, Iwantono and Ari Sulistyo Rini, Ari Sulistyo Rini and Puji Nurrahmawat, Puji Nurrahmawat and Suratun Nafisah, Suratun Nafisah and Marlia Morsin, Marlia Morsin and Romi Fadli Syahputra, Romi Fadli Syahputra (2023) Increasing the Efficiency Significantly of Dye-Sensitized Solar Cells based on ZnO Nanomaterial Photoanode by Doping Titanium. Indian Journal of Pure & Applied Physics, 61. pp. 90-95.

Nashiha Chalvi Syahra, Nashiha Chalvi Syahra and Iwantono, Iwantono and Ari Sulistyo Rini, Ari Sulistyo Rini and Puji Nurrahmawati, Puji Nurrahmawati and Suratun Nafisah, Suratun Nafisah and Marlia Morsin, Marlia Morsin and Romi Fadli Syahputra, Romi Fadli Syahputra (2023) Increasing the Efficiency Significantly of Dye-Sensitized Solar Cells based on ZnO Nanomaterial Photoanode by Doping Titanium. Indian Journal of Pure & Applied Physics, 61. pp. 90-95.

Natarajan, Elango and Muhammad Razif, Muhammad Rusydi and M Faudzi, AA and K., Palanikumar (2020) Evaluation of a suitable material for soft actuator through experiments and fe simulations. International Journal of Manufacturing, Materials, and Mechanical Engineering, 10 (2). pp. 64-76. ISSN 2156-1680

Nathan, Shelena Soosay and Berahim, Mazniha and Ramle, Rosni (2017) Rubric for measuring psychomotor and affective learning domain. Social Sciences & Humanities, 25 (NIL). pp. 101-108. ISSN 0128-7702

Nazarudin, Asma’ Amirah and Zulkarnain, Noraishikin and Mokri, Siti Salasiah and Wan Zaki, Wan Mimi Diyana and Hussain, Aini and Ahmad, Mohd Faizal and Mohd Nordin, Ili Najaa Aimi (2023) Performance Analysis of a Novel Hybrid Segmentation Method for Polycystic Ovarian Syndrome Monitoring. Diagnostics, 13 (750). pp. 1-18.

Nazarudin, Asma’ Amirah and Zulkarnain, Noraishikin and Mokri, Siti Salasiah and Wan Zaki, Wan Mimi Diyana and Hussain, Aini and Ahmad, Mohd Faizal and Mohd Nordin, Najaa Aimi (2023) Performance Analysis of a Novel Hybrid Segmentation Method for Polycystic Ovarian Syndrome Monitoring. Diagnostics, 13 (750). pp. 1-18.

Nazri, Nurul Najihah and Manshoor, Bukhari and Zaman, Izzuddin and Didane, Djamal Hissein and Sayed Abdelaal, Muhammed Abdelfattah and Ibrahim, Mohd Nizam (2022) Velocity and shear stress distribution of laminar flow between parallel plate by laplace transform approach. Journal of Complex Flow, 4 (1). pp. 19-23. ISSN 2672-7374

Ng, Ban Huat and Akasah, Zainal Abidin (2011) An overview of Malaysia Green Technology Corporation Office Building: a showcase energy-efficient building project in Malaysia. Journal of Sustainable Development, 4 (5). pp. 212-228. ISSN 1913-9063

Ng, Ban Kiong and Akasah, Zainal Abidin (2012) Analysis building maintenance factors for IBS precast concrete system: a review. / International Journal of Engineering Research and Applications (IJERA), 2 (6). pp. 878-883.

Ng, Ban Kiong and Akasah, Zainal Abidin (2012) An overview of precast concrete system for building maintenance: Malaysian perspective. NTERNATIONAL JOURNAL OF ENGINEERING SCIENCE & ADVANCED TECHNOLOGY, 2 (6). pp. 2250-3676.

Ng, Kei Hoa and Abd. Rahman, Hamimah and Somalu, Mahendra Rao (2018) Influence of silver addition on the morphological and thermal characteristics of nickel oxide-samarium doped ceria carbonate (NiO-SDCC) composite anode. International Journal of Integrated Engineering, 10 (1). pp. 196-201. ISSN 2229-838X

Ng, Kim-Soon and Belal, Hawaa and Ali Hasaballah, Abdel Hafiz and Ahmad, Abd Rahman (2018) The interaction effects of market orientation and entrepreneurial orientation on export performance: a case of sudanese export firms. Advanced Science Letters, 24 (5). pp. 3139-3145. ISSN 1936-7317

Nizam, Mohd Khairul and Mohd Razmi, Mohamad Shafiq and Mohd Ramli, Najmuddin and Razali, Mohd Najib (2022) Formulation of food-grade grease using paraffin oil, fumed silica, and chitosan. Materials Science Forum, 1069. pp. 211-218. ISSN 1662-9752

Nizam, Z. M. and Obiya, H. and Ijima, K. and Azhar, A. T. S. and Hazreek, Z. A. M. and Mohd Zin, Nur Shaylinda (2018) The evaluation of shear deformation for contact analysis with large displacement. Journal of Physics: Conference Series, 995. pp. 1-11. ISSN 1742-6588

Noman, Efaq and Al-Gheethi, A. A. and A. Talip, Balkis and Mohamed, Radin and Kassim, Amir Hashim (2020) Oxidative enzymes from newly local strain Aspergillus iizukae EAN605 using pumpkin peels as a production substrate: optimized production, characterization, application and techno-economic analysis. Journal of Hazardous Materials, 386. pp. 1-13. ISSN 0304-3894

Nor, Maria Elena and Rusiman, Mohd Saifullah and Sufahani, Suliadi Firdaus and Abdullah, Mohd Asrul Affendi and Bataraja, Sathwinee (2017) Deseasonalisation in electricity load forecasting. International Journal of Engineering & Technology, 5. pp. 1-4. ISSN 2227-524X

Norazlimi, Nor Atiqah and Ramli, Rosli (2015) The relationships between morphological characteristics and foraging behavior in four selected species of shorebirds and water birds utilizing tropical mudflats. The Scientific World Journal, 7 (1). pp. 1-7. ISSN 1537-744X

Norazlimi, Nor Atiqah and Ramli, Rosli and Hasmi, Nur Atirah (2020) Feeding Rate and Success Rate of Foraging Waders in Tropical Intertidal Areas. JOURNAL OF SUSTAINABLE NATURAL RESOURCES, 1 (1). pp. 37-42. ISSN 2229-838X

Nordin, Norbaizura and Radiman, Shahidan (2016) The development of simulation model of carrier injection in quantum dot laser system. ARPN Journal of Engineering and Applied Sciences, 11 (12). pp. 7578-7582. ISSN 1819-6608

Norhaimi, Norhafizah Azmi and Mohd Nawi, Nazri (2022) Sistem Pengurusan Logistik SISPA UTHM secara dalam talian. Applied Information Technology And Computer Science, 3 (1). pp. 789-802.

Nuhu, Awwal Hussain and Jikan, Suzi Salwah and Asman, Saliza and Badarulzaman, Nur Azam and Muhammad Zago, Dagaci and Bano, Nazia (2017) Fabrication and characterization of direct recycled Al-Cu-Cullet Metal composite. Journal of Science and Technology, 9 (4). pp. 15-18. ISSN 2229-8460

Nur Yunus, Faizal Amin and Mohd Salleh, Zuan Azhary and Rahim, Mohd Bekri and Mohd Affandi, Haryanti and Kamis, Arasinah and Syazwan Mustafa, Mohd Syafiq (2023) Field Measurement of Air Velocity and Temperature Factors that Influence the Thermal Comfort in Shuttle Bus. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 101 (2). pp. 1-8. ISSN 2289-7879

Nur Yunus, Faizal Amin and Mohd Salleh, Zuan Azhary and Rahim, Mohd Bekri Rahim and Mohd Affandi, Haryanti and Kamis, Arasinah and Mustafa, Mohd Syafiq Syazwan (2023) Field Measurement of Air Velocity and Temperature Factors that Influence the Thermal Comfort in Shuttle Bus. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 101 (2). pp. 164-171. ISSN 2289-7879

Nurhaziqah, A.M.S and Ahmad, M.K. and Faridah, A.B. and Saputri, D.G. and Ramli, S.A. and Mamat, M.H. and Shimomura, Masaru (2023) Optimization of polymer blend electrolytes with tuneable conductivity potentials. Materials Letters. pp. 1-4.

Nurhaziqah, A.M.S. and Ahmad, M.K. and Faridah, A.B. and Saputri, D.G. and Ramli, S.A. and Mamat, M.H. and Shimomura, M. (2023) Optimization of polymer blend electrolytes with tuneable conductivity potentials. Materials Letters, 334. pp. 1-4.

Nuwan Lakmal Hettiarachch, Nuwan Lakmal Hettiarachch and Tamil Selvan Subramaniam, Tamil Selvan Subramaniam and Muhammad Nurtanto, Muhammad Nurtanto and Sarala Thulasi Palpanadan, Sarala Thulasi Palpanadan and Zachariah John A. Belmonte, Zachariah John A. Belmonte and Arul Lawrence Antony Selvaraj, Arul Lawrence Antony Selvaraj and Nur Kholifah, Nur Kholifah (2023) Educating Financial Accounting: A Need Analysis for Technology-Driven Problem-Solving Skills. -. pp. 1-8.

Nuwan Lakmal Hettiarachchi, Nuwan Lakmal Hettiarachchi and Tamil Selvan Subramaniam, Tamil Selvan Subramaniam and Muhammad Nurtanto, Muhammad Nurtanto and Sarala Thulasi Palpanadan, Sarala Thulasi Palpanadan and Zachariah John A. Belmonte, Zachariah John A. Belmonte and Arul Lawrence Antony Selvaraj, Arul Lawrence Antony Selvaraj and Nur Kholifah, Nur Kholifah (2023) Educating Financial Accounting: A Need Analysis for Technology-Driven Problem-Solving Skills. -. pp. 1-8.

Nuwan Lakmal Hettiarachchi, Nuwan Lakmal Hettiarachchi and Tamil Selvan Subramaniam, Tamil Selvan Subramaniam and Sarala Thulasi Palpanadan, Sarala Thulasi Palpanadan and Anas Al-Fattal, Anas Al-Fattal (2023) Infusing Communication Skills into Financial Accounting Curriculum: A perspective from the Digital Era. -. pp. 1-9.

Nuwan Lakmal Hettiarachchi, NuwanTamil Selvan Subramaniam Lakmal Hettiarachchi and Tamil Selvan Subramaniam, Tamil Selvan Subramaniam and Muhammad Nurtanto, Muhammad Nurtanto and Sarala Thulasi Palpanadan, Sarala Thulasi Palpanadan and Zachariah John A. Belmonte, Zachariah John A. Belmonte and Arul Lawrence Antony Selvaraj, Arul Lawrence Antony Selvaraj and Nur Kholifah, Nur Kholifah (2023) Educating Financial Accounting: A Need Analysis for Technology-Driven Problem-Solving Skills. -. pp. 1-8.

Nyuk Ling Ma, Nyuk Ling Ma and Nan Zhang, Nan Zhang and Wilson Thau Lym Yong, Wilson Thau Lym Yong and Misbah, Suzana and Hashim, Fatimah and Chin Fhong Soon, Chin Fhong Soon and Gim Pao Lim, Gim Pao Lim and Wanxi Peng, Wanxi Peng and Christian Sonne, Christian Sonne (2023) Use, exposure and omics characterisation of potential hazard in nanomaterials. Materials Today Advances, 17. pp. 1-13.

OTHMAN, NURSYUHADA and KAVIARASU MUNIAN, KAVIARASU MUNIAN and HARIS, HIDAYAH and RAMLI, FARAH FARHANA and NUR HARTINI SARIYATI, NUR HARTINI SARIYATI and NAJMUDDIN, MOHD FAUDZIR and ABDUL-LATIFF, MUHAMMAD ABU BAKAR (2023) A Review on Next-Generation Wildlife Monitoring using Environmental DNA (eDNA) Detection and Next-Generation Sequencing in Malaysia. Sains Malaysiana, 52 (1). pp. 17-33.

OTHMAN, NURSYUHADA and MUNIAN, KAVIARASU and HARIS, HIDAYAH and RAMLI, FARAH FARHANA and NUR HARTINI, SARIYATI and NAJMUDDIN, MOHD FAUDZIR and ABDUL LATIFF, MUHAMMAD ABU BAKAR (2023) A Review on Next-Generation Wildlife Monitoring using Environmental DNA (eDNA) Detection and Next-Generation Sequencing in Malaysia. Sains Malaysiana. pp. 1-17.

OTHMAN, NURSYUHADA and MUNIAN, KAVIARASU and HARIS, HIDAYAH and RAMLI, FARAH FARHANA and NUR HARTINI SARIYATI, NUR HARTINI SARIYATI and NAJMUDDIN, MOHD FAUDZIR and ABDUL-LATIFF, MUHAMMAD ABU BAKAR (2023) A Review on Next-Generation Wildlife Monitoring using Environmental DNA (eDNA) Detection and Next-Generation Sequencing in Malaysia. Sains Malaysiana, 52 (1). pp. 17-33.

OTHMAN, NURSYUHADA and MUNIAN, KAVIARASU and HARIS, HIDAYAH and RAMLI, FARAH FARHANA and SARIYATI, NUR HARTINI and NAJMUDDIN, MOHD FAUDZIR and ABDUL-LATIFF, MUHAMMAD ABU BAKAR (2023) A Review on Next-Generation Wildlife Monitoring using Environmental DNA (eDNA) Detection and Next-Generation Sequencing in Malaysia. Sains Malaysiana. pp. 17-33.

Obaid, Faisal Obaid and Ali, Maimunah (2022) Analysis of factors affecting efficiency of UAE e-government procurement system. International Journal of Sustainable Construction Engineering and Technology, 13 (2). pp. 195-202. ISSN 2180-3242

Obaid, Faisal Obaid and Ali, Maimunah (2022) Construction of PLS-SEM model of organisational factors affecting the Efficiency of Emarati Electronic Government Procurement Platform (EEGPP) implementation in UAE. International Journal of Sustainable Construction Engineering and Technology, 13 (2). pp. 8-24. ISSN 2180-3242

Obaid, Omar Ibrahim and Mohammed, Mazin Abed and Abd Ghani, Mohd Khanapi and A. Mostafa, Salama and AL-Dhief, Fahad Taha (2018) Evaluating the performance of machine learning techniques in the classification of Wisconsin Breast Cancer. International Journal of Engineering & Technology, 7 (4.36). pp. 160-166. ISSN 2227-524X

Ogiemwonyi, Osarodion and Harun, Amran and ALAM, Mohammad Nurul and Othman, Bestoon Abdulmaged (2020) Do we care about going green? Measuring the effect of green environmental awareness, green product value and environmental attitude on green culture. An insight from Nigeria. Environmental and Climate Technologies, 24 (1). pp. 254-274. ISSN 2255-8837

Omar, J.M. and Nor, M.Z.M. and Basri, M.S.M. and Che Pa, N.F. (2020) Clarification of guava juice by an ultrafiltration process: analysis on the operating pressure, membrane fouling and juice qualities. Food Research, 4 (Suppl.). pp. 85-92. ISSN 25502166

Omar, Mohd Fairoz and Sulaiman, Erwan and Ahmad, Md. Zarafi (2019) Electromagnetic performances and main parameter sensitivity effect on unbalance magnetic flux in a new single‑phase FEFSM with segmental rotor. Journal of Electrical Engineering & Technology, 14. pp. 2333-2340. ISSN 1975-0102

Omar, Rosli and Sabudin, E. N and C. K., Che Ku Melor and A., N. H (2016) Potential field methods and their inherent approaches for path planning. ARPN Journal of Engineering and Applied Sciences, 11 (18). pp. 10801-10805. ISSN 1819-6608

Omar, Zaim and Sugiman, Sugiman and Mansor, Hazrina and Ahmad, Hilton (2023) Utilizing XFEM model to predict the flexural strength of woven fabric Kenaf FRP plate strengthened on plain concrete beam. Case Studies in Construction Materials, 18. pp. 1-10.

Ong, Huey Fang and Mustapha, Norwati and Hamdan, Hazlina and Rosli, Rozita and Mustapha, Aida (2020) Informative top-k class associative rule for cancer biomarker discovery on microarray data. Expert Systems With Applications, 146. pp. 1-18. ISSN 0957-4174

Ong Pauline, Ong Pauline and Tan Yean Keong, Tan Yean Keong and Lai Kee Huong, Lai Kee Huong and Sia Chee Kiong, Sia Chee Kiong (2023) A deep convolutional neural network for vibration-based health-monitoring of rotating machinery. Decision Analytics Journal, 7. pp. 1-9.

Osman, Mohamad Hairi and Adnan, Suraya Hani and Yahya, Nur Faezah (2020) Potential of using palm oil fuel ash and expanded polystyrene as an alternative concrete substance. International Journal of Sustainable Construction Engineering and Technology, 11 (1). pp. 151-163. ISSN 2180-3242

Othman, Hussain and M. Salleh, Berhannuddin and Sulaiman, Abdullah and Selamat, Asri (2009) From youth to youth: engineering undergraduates attracting school students to engineering education. European Journal of Engineering Education. pp. 1-8. ISSN 0304-3797

Othman, Nor Affanizam and Marwan Ali, Ab Malik and Sams, Noor Syafiqah and Salim, Fatimah and Panuh, Dedikarni and Yaakob, Muhamad Kamil and Embong, Zaidi and Md Sauri, Ahmad Shalabi and Che Isa, Nik Norziehana and Nor Hashim, Nor Zakiah (2023) Environmentally conscience corrosion inhibitors for mild steel in corrosive hydrochloric acid solution by Uncaria Cordata extract: experimental and theoretical studies. JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY. pp. 1-29.

Othuman Mydin, Md Azree and Khalid, Mohamad Sukeri and Omar, Roshartini and Mohammed Najm, Hadee and Abdal Qaidi, Shaker Mahmood and Awoyera, Paul Oluwaseun (2023) Durability Properties of Lightweight Foamed Concrete Reinforced With ‘Musa Acuminate’ Fibre. Journal of Advanced Research in Applied Sciences and Engineering Technology, 29 (2). pp. 145-158. ISSN 2462-1943

Pahazr, Nor Fadzilah and Mohd Apandi, Najeeha and Radin Mohamed, Radin Maya Saphira and Nagarajah, Ramathasan and Mohd Apandid, Affah and Mohd Radzuana, Rosmawanie and S. Moganathan, Shamine (2023) Stryhnos potatorum and Pisum sativum as natural coagulant for meat food processing wastewater treatment: isotherm studies. SEPARATION SCIENCE AND TECHNOLOGY. pp. 1-16.

Pahazri, Nor Fadzilah and Mohd Apandi, Najeeha and Radin Mohamed, Radin Maya Saphira and Nagarajah, Ramathasan and Mohd Apandid, Affah and Mohd Radzuan, Rosmawanie and S. Moganathan, Shamine (2023) Stryhnos potatorum and Pisum sativum as natural coagulant for meat food processing wastewater treatment: isotherm studies. SEPARATION SCIENCE AND TECHNOLOGY. pp. 1-16.

Pahazria, Nor Fadzilah and Mohd Apandi, Najeeha and Radin Mohamed, Radin Maya Saphira and Nagarajah, Ramathasan and Mohd Apandi, Affah and Mohd Radzuan, Rosmawanie and S. Moganathan, Shamine (2022) Stryhnos potatorum and Pisum sativum as natural coagulant for meat food processing wastewater treatment: isotherm studies. SEPARATION SCIENCE AND TECHNOLOGY. pp. 1-16.

Paiman, Nuur Azreen and Hariri, Azian and Masood, Ibrahim and Noor, Arma and Yusof, Khairul Hazdi and Abdullah, Samsuri and Idris, Ahmad Fu’ad and Mohd Afandi, Mohd Azizi and Asmuin, Nor Zelawati and Leman, Abdul Mutalib (2018) Development of neurobehavioral deterioration risk prediction model for welder: a proposed study. International Journal of Integrated Engineering, 10 (5). pp. 122-129. ISSN 2229-838X

Pairan, Mohamad Rasidi and Osman, Sharul Azmir and Md Nasir, , Ahmad Nabil and Noh@Seth, Nur Hazirah and Mohd Hisham, Mohd Hizwan and Mazlan, Adjah Naqkiah and Jambari, Hanifah and Aripin, Muhamad Afzamiman (2022) The blockage ratio effect to the spray performances. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 95 (1). pp. 99-109.

Pairan, Mohamad Rasidi and Osman, Sharul Azmir and Md Nasir, Ahmad Nabil and Noh@Seth, Nur Hazirah and Mohd Hisham, Mohd Hizwan and Mazlan, Adjah Naqkiah and Jambari, Hanifah and Aripin, Muhamad Afzamiman (2022) The blockage ratio effect to the spray performances. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 95 (1). pp. 99-109.

Panca Asmara, Yuli and Kurniawan, Tedi and Edy Sutjipto, Agus Geter and Jafar, Jamiluddin (2018) Application of plants extracts as green corrosion inhibitors for steel in concrete - a review. Indonesian Journal of Science & Technology, 3 (2). pp. 158-170. ISSN 2528-1410

Panga, Toh Yen and Tao Loa, Terence Shen and Ellenaa, Thierry and Mustafa, Helmy and Babalijaa, Jasmin and Subic, Aleksandar (2018) Fit, stability and comfort assessment of custom-fitted bicycle helmet inner liner designs, based on 3D anthropometric data. Applied Ergonomics, 68. pp. 240-248. ISSN 0003-6870

Pauline Ong, Pauline Ong and Kiat Soon Teo, Kiat Soon Teo and Chee Kiong Sia, Chee Kiong Sia (2023) UAV-based weed detection in Chinese cabbage using deep learning. Smart Agricultural Technology, 4. pp. 1-8.

Pauline Ong, Pauline Ong and Zainuddin, Zarita (2023) An optimized wavelet neural networks using cuckoo search algorithm for function approximation and chaotic time series prediction. Decision Analytics Journal, 6. pp. 1-12.

Pirzada, Shahnaz and Ab Rahman, Nurul Hidayah and Cahyani, Niken Dwi Wahyu and Othman, Muhammad Fakri (2023) A Survey of Forensic Analysis and Information Visualization Approach for Instant Messaging Applications. (IJACSA) International Journal of Advanced Computer Science and Applications, 14 (2). pp. 238-246.

Prasetijo, Joewono and Abd Rahaman, Nurhafidz and Hamid, Nor Baizura and Ahmad Sulaiman, Nurfarhanna and Isradi, Muhammad and Ashran Mustafa, Maisara and Mohd Jawi, Zulhaidi and Zaidie, Zulhilmi (2020) Investigation of road crash rate at FT050, Jalan Batu Pahat – Kluang: pre and post road median divider. International Journal of Road Safety, 1 (1). pp. 16-19. ISSN 2716-6651

Pratik Kumar Singh, Pratik Kumar Singh and Shiau, Wei Chan (2022) The impact of electronic procurement adoption on green procurement towards sustainable supply chain performance-evidence from Malaysian ISO organizations. Journal of Open Innovation : Technology, Market and Complexity, 8 (61). pp. 1-27.

Puteh, S. and Maisarah, M. and Rosnawati, B. (2017) Employability skills mastery of special needs students at polytechnics. Pertanika Journal of Social Sciences & Humanities, 25 (S). pp. 41-46. ISSN 0128-7702

Putera Agung Maha Agung, Putera Agung Maha Agung and Ramlan Sultan, Ramlan Sultan and Muhammad Idris, Muhammad Idris and Agus Tugas Sudjianto, Agus Tugas Sudjianto and Mustaffa Anjang Ahmad, Mustaffa Anjang Ahmad and Muhammad Fathur Rouf Hasan, Muhammad Fathur Rouf Hasan (2023) Probabilistic of in Situ Seismic Soil Liquefaction Potential Based on CPT-Data in Central Jakarta, Indonesia. INTERNATIONAL JOURNAL OF SUSTAINABLE CONSTRUCTION ENGINEERING AND TECHNOLOGY, 14 (1). pp. 241-248. ISSN 2600-7959

Putra, Andika Bagus Nur Rahma and Yee, Mei Heong and Meidyanti, Dewi Sabrina and Rahmawati, Anita Dwi (2021) Hi world: the virtual book learning integrated augmented reality to increase knowledge of Covid-19 prevention in the learning process post-pandemic era. International Journal of Interactive Mobile Technologies, 16 (6). pp. 176-187.

Putra Jaya, Ramadhansyah and Che Wan, Che Norazman and Hainin, Mohd Rosli and Mohd Warid, Muhammad Naqiuddin and Wan Ibrahim, Mohd Haziman and Mohamed Nazri, Fadzli and Arshad, Mohd Fadzil (2018) Strength properties of rice husk ash concrete under sodium sulphate attack. International Journal of Integrated Engineering, 10 (4). pp. 199-202. ISSN 2229-838X

Putra Jaya, Ramadhansyah and Hainin, Mohd Rosli and Wan Ibrahim, Mohd Haziman and Nazri, Fadzli Mohamed and Arshad, Mohd Fadzil and Muthusamy, Khairunisa (2018) Physical and chemical properties of rice husk ash concrete under seawater. International Journal of Integrated Engineering, 10 (4). pp. 165-168. ISSN 2229-838X

R., Dayana Amira and A. R., Roshanida and M. I., Rosli and M. F., Siti Fatimah Zahrah and J., Mohd Anuar and C. M., Nazrul Adha (2011) Bioconversion of empty fruit bunches (EFB) and palm oil mill effluent (POME) into compost using Trichoderma virens. African Journal of Biotechnology, 10 (81). pp. 18775-18780.

R., Nurliyana and I., Syed Zahir and K., Mustapha Suleiman and M. R., Aisyah and K., Kamarul Rahim (2010) Antioxidant study of pulps and peels of dragon fruits: a comparative study. International Food Research Journal, 17. pp. 367-375. ISSN 2231-7546

Radin Mohamed, Radin Maya Saphira and Al-Gheethi, Adel and Buyong, Ramlah and Hashim, Nor Haslina and Matias-Peralta, Hazel Monica and Mohd-Kassim, Amir-Hashim (2018) Nutrient recovery from domestic effluent using an 2 indigenous strain of scenedesmus sp. CLEAN - Soil Air Water, 46 (8). pp. 1-8. ISSN 1863-0650

Radin Mohamed, Radin Maya Saphira and Al-Gheethi, Adel and Buyong, Ramlah and Hashim, Nor Haslina and Matias-Peralta, Hazel Monica and Mohd-Kassim, Amir-Hashim (2018) Nutrient recovery from domestic effluent using an indigenous strain of scenedesmus sp. CLEAN - Soil Air Water, 46 (8). pp. 1-22. ISSN 1863-0650

Rady, Mohammed Hussien and Mustapa, Mohammad Sukri and Wagiman, Abdullah and Shamsudin, Shazarel and Lajis, Mohd Amri and Sami Al Alimi2, Sami Al Alimi2 and Mansor, Mohamad Norani and Harimon, Mohd Azhar (2020) Effect of the heat treatment on mechanical and physical properties of direct recycled aluminium alloy (AA6061). International Journal of Integrated Engineering, 12 (3). pp. 82-89. ISSN 2229-838X

Rafeek, Muhammad Akil and Firdaus Arbain, Adila and Sudarmilah, Endah (2019) Risk mitigation techniques in agile development processes. International Journal of Supply Chain Management, 8 (2). pp. 1123-1129. ISSN 2051-3771

Raffee, Ahmad Fauzi and Hamid, Hazrul Abdul and Radin Mohamed, Radin Maya Saphira and Jaffar, Muhammad Ismail (2018) Time series analysis of PM10 concentration in Parit Raja residential area. International Journal of Engineering and Technology, 7 (3.23). pp. 15-21. ISSN 2227-524X

Raffee, Ahmad Fauzi and Rahmat, Siti Nazahiyah and Abdul Hamid, Hazrul and Jaffar, Muhammad Ismail (2018) A review on short-term prediction of air pollutant concentrations. International Journal of Engineering & Technology, 7 (3.23). pp. 32-35. ISSN 2227-524X

Rahim, A. Che and Abu Bakar, Mohd Fadzelly and Kassim, Kartinee and Stanslas, Johnson and Wan Mohamad Zain, Wan Nor I'zzah Selective cytotoxic activity of methyl-3,4,5-trihydroxybenzoate isolated from Kernel of Bambangan (Mangifera pajang). Asian Journal of Chemistry, 30 (10). pp. 2273-2276. ISSN 0975-427X

Rahim, E. A. and Mohid, Z. and Mat, K. C. and Jamil, M. F. M. and Koyasu, R. and Sasahara, H. (2012) Experimental study of helical milling on CFRP (carbon fibre reinforced polymer) for the hole making process. Advanced Materials Research, 576. pp. 68-71. ISSN 1022-6680

Rahim, E. A. and Mohid, Z. and Mat, K. C. and Jamil, M. F. M. and Koyasu, R. and Sasahara, H. (2012) Hole making process of carbon fiber reinforced polymer (CFRP) using end mill cutting tool. Advanced Materials Research, 576. pp. 64-67. ISSN 1022-6680

Rahim, E. A. and Sasahara, H (2011) Investigation of tool wear and surface integrity on MQL machining of Ti-6AL-4V using biodegradable oil. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 225 (9). pp. 1505-1511. ISSN 0954-4054

Rahim, E.A. and Mohid, Z. and Rahman, A.H.A. and Bahman, M.F. (2012) The effect of internal through coolant on grinding performance on AISI1020 mildsteel. Advanced Materials Research, 576. pp. 87-90. ISSN 1022-6680

Rahimoon, Asif A. and Abdullah, Mohd Noor and Taib, Ishkrizat (2020) Design of a contactless body temperature measurement system using arduino. Indonesian Journal of Electrical Engineering and Computer Science, 19 (3). pp. 1251-1258. ISSN 2502-4752

Rahimoon, Asif Ahmed and Abdullah, Mohd Noor and Soomro, Dur Muhammad and Nassar, Murad Yahya and A. Memon, Z. and Shaikh, P.H. (2020) Design of parabolic solar dish tracking system using arduino. Indonesian Journal of Electrical Engineering and Computer Science, 17 (2). pp. 914-921. ISSN 2502-4752

Rahman, Gohar and Chai, Chuah Wen (2018) Fog computing, applications , security and challenges, review. International Journal of Engineering & Technology, 7 (3). pp. 1615-1621. ISSN 2227-524X

Rahman, Md. Mahmudur and Beng Gan, Kok and Abd Aziz, Noor Azah and Huong, , Audrey and You, Huay Woon (2023) Upper Limb Joint Angle Estimation Using Wearable IMUs and Personalized Calibration Algorithm. Mathematics. pp. 1-17.

Rahman, Md. Mahmudur and Kok Beng Gan, Kok Beng Gan and Abd Aziz, Noor Azah and Audrey Huong, Audrey Huong and Huay Woon You, Huay Woon You (2023) Upper Limb Joint Angle Estimation Using Wearable IMUs and Personalized Calibration Algorithm. Mathematics, 11 (970). pp. 1-17.

Rahman, Md. Mahmudur and Kok Beng Gan, Kok Beng Gan and Abd Aziz, Noor Azah and Huong, Audrey and Huay Woon You, Huay Woon You (2023) Upper Limb Joint Angle Estimation Using Wearable IMUs and Personalized Calibration Algorithm. mathematics, 11 (4). pp. 1-17.

Rahman, Riki and Othman, Zarina and Ani, Fauziah and Abdullah, Muhaymin Hakim (2020) Nuclear issues in the Iran - United States relations: from friends to foes. Tamkang Journal of International Affairs. pp. 1-54.

Rahman, Riki and S. Hazis, Faisal and Ramli, Rashila (2010) Iranian Nuclear and United States Interests in the Middle East, 2005-2013: an analysis of neorealism. Tamkang Journal of International Affairs, 21 (3). pp. 1-54. ISSN 10274979

Rahman Azahar, Mohamad Amirur and Darlis, Nofrizalidris and Hassan, Norhafizzah and Mohd Salleh, Zuliazura and Saiful Azam, Syafiqah Ruqaiyah and Taib, Ishkrizat and Ngali, Mohd Zamani and Mustaffa, Khairul Nizam and Hashim, Muhamad Mohshein (2023) CFD Analysis on Different Filling Volume Capacity and Fluid Density for Flexitank Application. CFD Letters, 15 (1). pp. 1-12. ISSN 2180-1363

Rahmat, Asmah and Choo, Yen Leng and Abu Bakar, Fazleen Izzany and Abu Bakar, Mohd Fadzelly (2018) Effect of red onion (Allium Cepa Var. Aggregatum G. Don) on serum uric acid Level and total antioxidant status in normal and induced hyperuricemic rats. Asian Journal of Pharmaceutical and Clinical Research, 11 (3). pp. 178-183. ISSN 0974-2441

Rahmat, Rafidah and Salim, Siti Aisyah (2021) A systematic review of digital services in government sector. REVIEW OF INTERNATIONAL GEOGRAPHICAL EDUCATION, 11 (9). pp. 1988-1998. ISSN 2146-0353

Raja Abd Assiss, Raja Fairol Farouk and F., R. F. and Zainorabidin, Adnan and A., A. and Zainun, 3. Noor Yasmin and Y., N. (2020) Categorization of slope failure in southern Malaysia using total estimated hazard (TEHD) method. International Journal of Recent Technology and Engineering (IJRTE), 9 (1). pp. 1966-1971. ISSN 2277-3878

Ramasamy, Chandrashekar and Hsin, Chan Yuet and Shamsuddin, Alina (2018) A foresight study on nanotechnology in cosmetics industries in Malaysia. Advanced Science Letters, 24 (6). pp. 4581-4587. ISSN 1936-6612

Ramin, Nursyahera Azreen and Asman, Saliza (2023) Synthesis and evaluation of green magnetic mesoporous molecularly imprinted polymers for adsorption removal of parabens from cosmetic samples. Current Chemistry Letters. pp. 623-640.

Ramli, A. and Akasah, Z. A. and Masirin, M. I. M. (2013) Factors contributing building safety and health performance of low cost housing in Malaysia. Journal of Safety Engineering, 2 (1). pp. 1-5.

Ramli, Ahmad Kamal and Abd Wahab, Mohd Helmy and Syed Idrus, Syed Zulkarnain (2020) Conversion of SLA document into fuzzy rule base approach and applied in MAPE-K. Journal of Physics: Conference Series, 1529. pp. 1-11. ISSN 1742-6588

Ramli, Azuin and Abidin Akasah, Zainal Abidin and Mohd Masirin, Mohd Idrus (2013) Assessing safety and health factors influencing performance of Malaysian low-cost housing. Civil and Environmental Research, 3 (3). pp. 7-19.

Ramli, K. N. and Abd-Alhameed, R. A. and See, C. H. and Excell, P. S. and Noras, J. M. (2013) Hybrid computational scheme for antenna human body interaction. Progress In Electromagnetics Research, 133. pp. 117-136.

Ramli, Sofia Najwa and Ahmad, Rabiah and Abdollah, Mohd Faizal (2016) A secure data authentication in wireless body area network for health monitoring using electrocardiogram-based key agreement. International Review on Computers and Software (I.RE.CO.S.),, 11 (7). pp. 622-630. ISSN 1828-6003

Ramly, Nurfarawahida and Rusiman, Mohd Saifullah and Ismail, Shuhaida and Suparman, Suparman and Mohamad Hamzah, Firdaus and Ozlem Gurunlu Alma, Ozlem Gurunlu Alma (2023) An adjustment degree of fitting on fuzzy linear regression model toward manufacturing income. IAES International Journal of Artificial Intelligence (IJ-AI), 12 (2). pp. 543-551. ISSN 2252-8938

Rashid, Sami Abduljabbar and Audah, Lukman and Hamdi, Mustafa Maad and Jubair, Mohammed Ahmed and Hassan, Mustafa Hamid and Abood, Mohammed Salah and A. Mostafa, Salama (2023) A collaborated genetic with lion optimization algorithms for improving the quality of forwarding in a vehicular ad-hoc network. IAES International Journal of Artificial Intelligence (IJ-AI), 12 (2). pp. 667-677. ISSN 2252-8938

Rasi, Raja Zuraidah and Ismail, Hazim and Shahbaz, Muhammad Saeed and Kaliani Sundram, Veera Pandiyan (2023) Interdisciplinary challenges in the circular supply chains: A systematic literature review. Heliyon, 9. pp. 1-20.

Rasi, Raja Zuraidah and Ismail, Hazim and Shahbaz, Muhammad Saeed and Veera Pandiyan Kaliani Sundram, Veera Pandiyan Kaliani Sundram (2023) Interdisciplinary challenges in the circular supply chains: A systematic literature review. Heliyon, 9. pp. 1-20.

Rasib, Abd Wahid and Mohd Ali, Hamzah and Alvin, L.M.S. and Kanniah, K.D. and Idris, Nurul Hawani and Omar, Hamdan and Dollah, Rozilawati and Ahmad, Mustaffa Anjang (2018) Upscaling aboveground biomass estimation at low-land royal belum forest reserve using unmanned aerial vehicle image. International Journal of Integrated Engineering, 10 (4). pp. 140-150. ISSN 2229-838X

Rassiah, Kannan and Megat Ahmad, M. M. H. and Ali, Aidy and Abdullah, Abd Halid and Nagapan, Sasitharan (2018) Mechanical properties of layered laminated woven bamboo gigantochloa scortechinii/epoxy composites. Journal of Polymers and the Environment, 26 (4). 1328 - 1342. ISSN 1566-2543

Rasyidah, Rasyidah and Efend, Riswan and Mohd. Nawi, Nazri and Mat Derisf, Mustafa and S.M.Aqil Burney, S.M.Aqil Burney (2023) Cleansing of inconsistent sample in linear regression model based on rough sets theory. Systems and Soft Computing, 5. pp. 1-14.

Rasyidah, Rasyidah and Efendi, Riswan and Mohd. Nawi, Nazri and Mat Deris, Mustafa and Aqil Burney, S.M. (2023) Cleansing of inconsistent sample in linear regression model based on rough sets theory. Systems and Soft Computing, 5. pp. 1-14.

Rasyidah, Rasyidah and Efendi, Riswan and Mohd. Nawi, Nazri and Mat Deris, Mustafa and Burney, S.M.Aqil (2023) Cleansing of inconsistent sample in linear regression model based on rough sets theory. Systems and Soft Computing. pp. 1-14.

Rasyidah, Rasyidah and Efendi, Riswan and Mohd. Nawi, Nazri and Mat Deris, Mustafa and S.M.Aqil Burney, S.M.Aqil Burney (2023) Cleansing of inconsistent sample in linear regression model based on rough sets theory. Systems and Soft Computing, 5. pp. 1-14.

Rasyidah, Rasyidah and Efendi, Riswan and Mohd. Nawi, Nazri and Mat Derisf, Mustafa and Aqil Burney, S.M. (2023) Cleansing of inconsistent sample in linear regression model based on rough sets theory. Systems and Soft Computing, 5. pp. 1-14.

Razal, Irfan Haziq and Mohd Taib, Aizat and Abd Rahman, Norinah and Abang Hasbollah, Dayang Zulaika and Md Dan, Mohd Firdaus and Ramli, Ahmad Bukhari and Ibrahim, Aniza (2023) Slope stability analysis of riverbank in Malaysia with the effects of vegetation. Physics and Chemistry of the Earth, 129. pp. 1-13.

Razali, Irfan Haziq and Mohd Taib, Aizat and Abd Rahman, Norinah and Abang Hasbollah, Dayang Zulaika and Md Dan, Mohd Firdaus and Ramli, Ahmad Bukhari and Ibrahim, Aniza (2023) Slope stability analysis of riverbank in Malaysia with the effects of vegetation. Physics and Chemistry of the Earth, 129.

Razali, Mohd Azahari and Madon, Rais Hanizam and Mohmad Ja'at, Md Norrizam and Sapit, Azwan and Salleh, Hamidon and Hushim, Mohd Faisal and Zaboon, Waseem Alwan and Samsubaha, Muhammad Fauzi (2020) Investigation of diesel injector flow pattern based on computer-aided design. CFD Letters, 12 (5). pp. 13-23. ISSN 2180-1363

Razali, Mohd Azahari and Mori, Masayuki and Suzuki, Masataro and Masuda, Wataru (2013) Measurement of thermophoretic parameters for binary gas mixtures. Journal of Aerosol Science, 63. pp. 60-68.

Razali, Muhammad Najib and Manaf, Zaharah and Mohd Yassin, Azlina (2010) Internet business strategies by property companies in Asia. Property Management, 28 (4). pp. 270-289.

Razali, Muhammad Razmi and Mohd Faudz, Ahmad Athif and Shamsudin, Abu Ubaidah and Mohamaddan, Shahrol (2023) A hybrid controller method with genetic algorithm optimization to measure position and angular for mobile robot motion control. Robotics and AI. pp. 1-14.

Razali, Muhammad Razmi and Mohd Faudzi, Ahmad Athif and Shamsudin, Abu Ubaidah and Mohamaddan, Shahrol (2023) A hybrid controller method with genetic algorithm optimization to measure position and angular for mobile robot motion control. Robotics and AI. pp. 1-10.

Reshu Gupta, Reshu Gupta and Janani Selvam, Janani Selvam and Ashok Vajravelu, Ashok Vajravelu and Sasitharan Nagapan, Sasitharan Nagapan (2023) Analysis of a Squeezing Flow of a Casson Nanofluid between Two Parallel Disks in the Presence of a Variable Magnetic Field. Symmetry, 15 (120). pp. 1-17.

Rfaat Moner Soliby, Rfaat Moner Soliby and Jamaian, Siti Suhana (2023) A Space Fractional Uphill Dispersion in Traffic Flow Model with Solutions by the Trial Equation Method. Infrastructures, 8 (45). pp. 1-13.

Ridzuan, Mohd Baharudin and Daud, Zawawi and Ahmad, Zulkifli and Abd Latiff, Ab Aziz and Awang, Halizah (2018) Leachate treatment using up-flow anaerobic sludge blanket system. International Journal of Integrated Engineering, 10 (1). pp. 62-65. ISSN 2229-838X

Rini, I Gusti Ayu Intan Saputra and Hasim, Muhammad Asyraf (2021) CSR strategies of five-star hotels in Denpasar-Bali based on local community perceptions. Indonesian Journal of Sustainability Accounting and Management, 5 (1). pp. 57-70. ISSN 2597-6214

Rodzalan, Shazaitul Azreen and Mohd Noor, Noor Nazihah and Abdullah, Nor Hazana and Saat, Maisarah Mohamed (2022) TVET skills gap analysis in electrical and electronic industry: perspectives from academicians and industry players. Journal of Technical Education and Training, 14 (1). pp. 158-177. ISSN 2229-8932

Rodzalan, Shazaitul Azreen and Ong, Guan Yin and Mohd Noor, Noor Nazihah (2020) A Foresight Study of Artificial Intelligence in the Agriculture Sector in Malaysia. International Journal of Advanced Science and Technology, 29 (6). pp. 447-462. ISSN 2005-4238

Rohanai, Reyanhealme and Ahmad, Muhammad Fazrulhelmi and Mohd Rameli, Mohd Rustam and Wan Hassan, Wan Azrul Shafuan and Abd Mutalib, Norathirah Nabila (2022) The attitudes of MTUN students towards m-learning usage during COVID-19 Pandemic. International Journal of Information and Education Technology, 12 (5). pp. 406-413.

Rosfuzah, Rosfuzah and Mohd Ayub, Ahmad Fauzi and Ghazali, Norliza and Zulkifli, Nurul Nadwa and Md Latip, Siti Noor Haslina and Abu Hanifah, Siti Syuhada INVESTIGATING FACTORS THAT AFFECT THEN CONTINUANCE USE INTENTION AMONG THE HIGHER EDUCATION INSTITUTIONS’ LEARNERS TOWARDS A GAMIFIED M-LEARNING APPLICATION. Journal of Information Technology Education: Research, 22. pp. 1-32.

Roslan, R. and Mahmud, M. N. and Hashim, I. (2011) Effects of feedback control on chaotic convection in fluid-saturated porous media. International Journal of Heat and Mass Transfer, 54. pp. 404-412.

Roslan, R. and Saleh, H. and Hashim, I. (2011) Buoyancy-driven heat transfer in nanofluid-filled trapezoidal enclosure with variable thermal conductivity and viscosity. Numerical Heat Transfer, A (60). pp. 867-882. ISSN 1040-7782

Roslan, Rosfuzah and M. Othman, Razib and A. Shah, Zuraini and Kasim, Shahreen and Asmuni, Hishammuddin and Talib, Jumail and Hassan, Rohayanti and Zakaria, Zalmiyah (2010) Utilizing shared interacting domain patterns and Gene Ontology information to improve protein-protein interaction prediction. Computers Biology Medicine, 6 (40). pp. 555-564.

Roslan, Rosfuzah and Mohd Ayub, Ahmad Fauzi and Ghazali, Norliza and Zulkifli, Nurul Nadwa and Md Latip, Siti Noor Haslina and Abu Hanifah, Siti Syuhada (2023) INVESTIGATING FACTORS THAT AFFECT THE CONTINUANCE USE INTENTION AMONG THE HIGHER EDUCATION INSTITUTIONS’ LEARNERS TOWARDS A GAMIFIED M-LEARNING APPLICATION. Journal of Information Technology Education: Research, 22. pp. 97-128.

Roslan, Rosfuzah and Mohd Ayub, Ahmad Fauzi and Ghazali, Norliza and Zulkifli, Nurul Nadwa and Md Latip, Siti Noor Haslina and Abu Hanifah, Siti Syuhada INVESTIGATING FACTORS THAT AFFECT THE CONTINUANCE USE INTENTION AMONG THE HIGHER EDUCATION INSTITUTIONS’ LEARNERS TOWARDS A GAMIFIED M-LEARNING APPLICATION. Continuance Use Intention, 22. pp. 97-128.

Roslee, Faiza and Mohd Kamil, Nor Amani Filzah and Abd Kadir, Aeslina (2017) Potential of ground and unground palm oil fuel ash in construction material. International Journal of Integrated Engineering, 3 (1). pp. 1-4. ISSN 2229-838X

Roslee, Noor Faiza and Mohd Kamil, Nor Amani Filzah and Abdul Kadir, Aeslina and Jalil, Abdul Rahim and Hamzah, Nurhidayah and Mohamed Noor, Norazian and Sandu, Andrei Victor (2022) New ray on remediation of high rings polycyclic aromatic hydrocarbons: remediation of raw petroleum sludge using solidification and stabilization method. Arch. Metall, 67 (4). pp. 1201-1208.

Rosli, Mohd Shafie and Saleh, Nor Shela and Md. Ali, Azlah and Abu Bakar, Suaibah (2023) Factors Determining the Acceptance of E-Wallet among Gen Z from the Lens of the Extended Technology Acceptance Model. Sustainability, 15 (5752). pp. 1-23.

Rosly, Rosaida and Makhtar, Mokhairi and Awang, Mohd Khalid and Awang, Mohd Isa and Abdul Rahman, Mohd Nordin and Mahdin, Hairulnizam (2018) Comprehensive study on ensemble classification for medical applications. International Journal of Engineering & Technology, 7 (2.14). pp. 186-190. ISSN 2227-524x

Rozali, Mohd Zulfadli and Mohd Samshul, Siti Nurafiqah and Abdul Rahman, Khairul Anuar (2023) The Effect of Psychological Well-Being on Students’ Perception of Online Learning During the COVID-19 Pandemic. JOURNAL OF TECHNICAL EDUCATION AND TRAINING, 15 (1). pp. 85-93. ISSN 2229-8932

Rozali, Mohd Zulfadli and Puteh, Saifullizam and Ismail, Affero and Marian, Mohd Fairuz and Mohamed, Firdaus (2020) Factor of active participation engineering and technical student-athletes in co-curricular activities (Sport). Journal of Technology and Humanities, 1 (1). pp. 34-38. ISSN 2710-6357

Rozali, Mohd Zulfadli and Puteh, Saifullizam and Nur Yunus, Faizal Amin and Hamdan, Nor Hidayah and Mohd Latif, Hadafi Fitri (2022) Reliability and validity of instrument on academic enhancement support for student-athlete using rasch measurement model. Asian Journal of University Education (AJUE), 18 (1). pp. 290-299.

Rubani, Siti Nur Kamariah and Subramaniam, Tamil Selvan and Ariffin, Arihasnida and Hamzah, Nurhasyimah and Bidin, Maisarah (2018) Practical knowledge of prospective teachers’ in pedagogy. Journal of Physics: Conference Series, 1049 (1). pp. 1-5. ISSN 1742-6588

Rusli, Normaisarah and Mohd Nawi, Nazri (2022) Sistem E-Bajet Hira Katering. Applied Information Technology And Computer Science, 3 (1). pp. 1167-1185.

S Alkrbash, Abdulbaset and A Abosbaia, Alhadi and M Elfagh, Abdulhafid (2023) Comparison of Basic Iterative Methods Used to Solve of Heat and Fluid Flow Problems. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 101 (1). pp. 186-191. ISSN 2289-7879

S Alkrbash, Abdulbaset and A Abosbaia, Alhadi and M Elfaghi, Abdulhafid (2023) Comparison of Basic Iterative Methods Used to Solve of Heat and Fluid Flow Problems. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 101 (1). pp. 186-191. ISSN 2289-7879

S., Broumi and D., Nagarajan and A., Bakali and M., Talea and F., Smarandache and M., Lathamaheswari and J., Kavikumar (2019) Implementation of neutrosophic function memberships using MATLAB program. Neutrosophic Sets and Systems, 27. pp. 44-52. ISSN 23316055

S., Herlambang and Wahyudiyono, Wahyudiyono and A., Subiyantoro and Jumintono, Jumintono and L., Madu and R., Hartati (2021) Role of smartphone devices in motivation to study in the Covid-19 Pandemic. Health Education and Health Promotion, 9 (3). pp. 257-261. ISSN 2345-2897

S. Abdullah, S. A. and M. Zuhudi, N. Z. and Mohd Aris, K. D. and Roslan, M. N. and Isa, M. D. (2020) Influence of yarn parameters on cotton/kenaf blended yarn characteristics. Journal of Mechanical Engineering and Sciences (JMES), 14 (4). pp. 7622-7628. ISSN 2289-4659

S. Hakim, S. J. and Abdul Razak, H. (2011) Application of artificial neural network on vibration test data for damage identification in bridge girder. International Journal of the Physical Sciences, 6 (35). pp. 7991-8001.

S. Hakim, S. J. and M. Irwan, J. and W. Ibrahim, M. H. and S. Ayop, S. (2022) Structural damage identification employing hybrid intelligence using artificial neural networks and vibration-based methods. Journal of Applied Research and Technology, 20. pp. 221-236.

S. J. S. Hakim*, S. J. S. Hakim* (2011) Application of artificial neural network on vibration test data for damage identification in bridge girder. International Journal of the Physical Sciences, 6 (35). pp. 7991-8001.

S. K. Yee, S. K. Yee and M. C. Teoh, M. C. Teoh and Z. Z. Abidin, Z. Z. Abidin and S. H. Dahlan, S. H. Dahlan and M. R. Anuar, M. R. Anuar and K. S. Tee, K. S. Tee and D. Lim, D. Lim and C. H. See, C. H. See and H. Zhang, H. Zhang and Y. Zheng, Y. Zheng and C. F. Soon, C. F. Soon (2023) RADIATION CHARACTERISTIC OF CLOUD BASED MAGNETOMETER FOR VEHICLE DETECTION. Jurnal Teknologi (Sciences & Engineering). pp. 167-174. ISSN 2180–3722

S. Khaerudini, Deni and Othman, M. A. and Mahzan, S. and Untoro, P. and Sebayang, D. (2011) Improved oxidation resistance of a nanocrystalline lanthanum-implanted FeCr alloy. SciVerse ScienceDirect, 23. pp. 760-764.

S.M. Letchumanan, S.M. Letchumanan and A.M.T. Arifin, A.M.T. Arifin and A. E Ismail, A. E Ismail and I. Taib, I. Taib (2023) A Review on Carbon Fiber Reinforced Polymer as Wrapping Structures For Pipeline. INTERNATIONAL JOURNAL OF INTEGRATED ENGINEERING, 15 (1). pp. 45-57. ISSN 2600-7916

SALH, ADEB and NGAH, RAZALI and Audah, Lukman and SOON KIM, KWANG and ALJALOUD, KHALED A. and TALIB, HAIRUL NIZAM (2023) Energy-Efficient Federated Learning With Resource Allocation for Green IoT Edge Intelligence in B5G. Digital Object Identifier, 11. pp. 16353-16367.

SOOMRO, ZUBAIR ADEL and SHAMSUDIN, ABU UBAIDAH and ABD HALIM, RUZAIR1 and ADRIAN, ANDI and HAZELI, MOHD (2023) NON-VERBAL HUMAN-ROBOT INTERACTION USING NEURAL NETWORK FOR THE APPLICATION OF SERVICE ROBOT. IIUM Engineering Journal, 24 (1). pp. 1-18.

SOOMRO, ZUBAIR ADEL and SHAMSUDIN, ABU UBAIDAH and ABDUL RAHIM, RUZAIRI and ADRIANSHAH, ANDI and MOHD HAZELI, MOHD HAZELI (2023) NON-VERBAL HUMAN-ROBOT INTERACTION USING NEURAL NETWORK FOR THE APPLICATION OF SERVICE ROBOT. HUM Engineering Journal, 24 (1). pp. 301-318.

SOOMRO, ZUBAIR ADIL and SHAMSUDIN, ABU UBAIDAH and ABDUl RAHIM, RUZAIRI and ADRIAN, ANDI and HAZELI, MOHD (2023) NON-VERBAL HUMAN-ROBOT INTERACTION USING NEURAL NETWORK FOR THE APPLICATION OF SERVICE ROBOT. IIUM Engineering Journal, 24 (1). pp. 301-318.

SUW, HERU and MI ATILTIANSYAH, AN and ANDIKA, JULI RI and SHAVISUDIN, UBAIDAH and AUZI ZAICARIX, M °H MAD (2023) AN INTEGRATED RRT*SMART-A* ALGORITHM FOR SOLVING THE GLOBAL PATH PLANNING PROBLEM IN A STATIC ENVIRONMENT. HUM Engineerinz Journal, 24 (1).

SUWOYO, HERU and ADRIANSHAH, ANDI and ANDIKA, JULPRI and SHAMSUDIN, ABU UBAIDAH and ZAKARIA, MOHAMAD FAUZI (2023) AN INTEGRATED RRT*SMART-A* ALGORITHM FOR SOLVING THE GLOBAL PATH PLANNING PROBLEM IN A STATIC ENVIRONMENT. TIUM Engineerinz Journal, 24 (1). pp. 269-278.

SUWOYO, HERU and ADRIANSYAH, ANDI and ANDIKA, JULFRI and SHAMSUDIN, ABU UBAIDAH and ZAKARIA, MOHAMAD FAUZI (2023) AN INTEGRATED RRT*SMART-A* ALGORITHM FOR SOLVING THE GLOBAL PATH PLANNING PROBLEM IN A STATIC ENVIRONMENT. HUM Engineering Journal, 24 (1). pp. 269-284.

Saat, Abdullah Fauzi and Rosly, Nurhayati (2019) Aerodynamic analysis of vertical axis wind turbine. Journal of Aviation and Aerospace Technology, 1 (1). pp. 1-6. ISSN 2682-7433

Sabran, Siti Fatimah and Mazlun, Muhamad Harith and Abadullah, Zunoliza and Mohamed, Maryati and Abu Bakar, Mohd. Fadzelly and Pa’ee, Furzani and Cuevas Linatoc, Alona (2020) A study on antimycobacterial activity and phytochemical constituents of Dipterocarpus sublamellatus foxw. hexane extract (DSHE). International Journal of Pharmaceutical Research, 12 (1). pp. 651-659. ISSN 0975-2366

Sabri, Ainaa Mardhiah and Talib, Norfazillah and Mohd Saad, Nur Syazwani Filzah and Abdul San, Amiril Sahab and Said Ahmad, Sandip Kunar and Abdullah, Haslina and Lee Woon Kiow, Lee Woon Kiow and Salleh, Aslinda (2023) Physical Properties of New Formulation of Hybrid Nanofluid-based Minimum Quantity Lubrication (MQL) from Modified Jatropha Oil as Metalworking Fluid. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 101 (1). pp. 17-26. ISSN 2289-7879

Sabri, Ainaa Mardhiah and Talib, Norfazillah and Mohd Saad, Nur Syazwani Filzah and Abdul Sani, Amiril Sahab and Kunar, Sandip and Ahmad, Said and Abdullah, Haslina and Lee Woon Kiow, Lee Woon Kiow and Salleh, Aslinda (2023) Physical Properties of New Formulation of Hybrid Nanofluid-based Minimum Quantity Lubrication (MQL) from Modified Jatropha Oil as Metalworking Fluid. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 101 (1). pp. 17-26. ISSN 2289-7879

Sadikin, A. and Khian, N. Y. and Hwey, Y. P. and Al-Mahdi, H. Y. and Taib, I. and Sadikin, A. N. and Md Salleh, S. and Ayop, S. S. (2018) Effect of number of baffles on flow and pressure drop in a shell side of a shell and tube heat exchangers. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 48 (2). pp. 156-164. ISSN 2289-7879

Sadikin, Azmahani and Mohd Bahrin, Mohd Khairul Anam and Ismail, Azzura and Ismail, Al Emran and Ahmad, Sufizar and Salleh, Salihatun and Abdol Rahman, Mohd Nasrull and Sapit, Azwan and Ayop, Sallehuddin Shah (2018) Numerical simulation in transient flow of non-newtonian fluid in nozzles during filling process. International Journal of Integrated Engineering, 3 (1). pp. 92-95. ISSN 2229-838X

Sagara, Shinichi and Ambar, Radzi and Takemura, Fumiaki (2013) A stereo vision system for underwater vehicle-manipulator systems – proposal of a novel concept using pan-tilt-slide cameras. Journal of Robotics and Mechatronics, 25 (5). pp. 785-794.

Sahar, Norain and Ngadiron, Zuraidah and Zulkifli, Dinie Amani and Reventheran Ganasan, Reventheran Ganasan and Ismail, Noramin and N.A. Kamaluddin, N.A. Kamaluddin (2023) Analysis of Switchgear on Insulation Performance and Reliability in Malaysian Railway Double Track Project. International Journal of Engineering Trends and Technology, 71 (4). pp. 72-78. ISSN 2231–5381

Sahari, Norain and Buntat, Zolkafle and Azman, Zulkifli and Ngadiron, Zuraidah and Sim, Sy Yi and Zambri, Nor Aira and Mohd Noh, Faridah Hanim and Mustafa, Farahiyah and Mashori, Sumaiya and Norjali, Rasida (2020) The structural analysis of MWCNTs modified by DBD plasma and electrical properties on schottky diode application. International Journal of Advanced Trends in Computer Science and Engineering, 9 (1). pp. 503-511. ISSN 2278-3091

Saiah, Abdalla Ab Sinusi and Mostafa, Mousa Rahil and Bon, Abdul Talib and Ng, Kim Soon (2011) Predict the financial markets crises (forecasting models and their applicability in the Arab Financial Markets). Journal of Applied Sciences Research, 7 (7). pp. 1188-1194.

Saiful Azam, Syafiqah Ruqaiyah and Darlis, Nofrizalidris and Mustaffa, Norrizal and Azahar, Mohamad Amirur Rahman and Sadun, Amirul Syafiq and Abu Hassan, Omar and Taib, Ishkrizat and Mustaffa, Khairul Nizam and Hashim, Muhamad Mohshein (2023) CFD Analysis of the Effect of Heat Distribution on Different Heating Pad Piping Arrangements for Flexitank Application. CFD Letters, 15 (2). pp. 1-15. ISSN 2180-1363

Saiful Azam, Syafiqah Ruqaiyah and Darlis, Nofrizalidris and Mustaffa, Norrizal and Rahman Azahar, Mohamad Amirur and Sadun, Amirul Syafiq and Abu Hassan, Omar and Taib, Ishkrizat and Mustaffa, Khairul Nizam and Hashim, Muhamad Mohshein (2023) CFD Analysis of the Effect of Heat Distribution on Different Heating Pad Piping Arrangements for Flexitank Application. CFD Letters, 15 (2). pp. 1-15. ISSN 2180-1363

Sainudin, Muhammad Shabery and Othman, Nor Hazurina and Anak Guntor, Nickholas Anting and A. Khalid, Nur Hafizah and Mohd-Salleh, Siti Nor Aishah (2023) Experimental Evaluation on Physical and Mechanical Properties of Concrete Containing Green Mussel Shell (Perna viridis) Powder as an Admixture. INTERNATIONAL JOURNAL OF SUSTAINABLE CONSTRUCTION ENGINEERING AND TECHNOLOG, 14 (2). pp. 153-167. ISSN 2600-7959

Saleh, H. and Roslan, R. and Hashim, I. (2011) Natural convection heat transfer in a nanofluid-filled trapezoidal enclosure. International Journal of Heat and Mass Transfer, 54. pp. 194-201.

Saleh, H. and Roslan, R. and Hashim, I. (2011) Natural convection in a porous trapezoidal enclosure with an inclined magnetic field. Computers & Fluids, 47. pp. 155-164.

Saleh, Nor Shela and Rosli, Mohd Shafie and Aris, Baharuddin and Ahmad, Maizah Hura and Abjoli Sejzi, Abbas and Shamsudin, Nur Amalina (2015) E-learning and social media motivation factor model. International Education Studies, 9 (1). pp. 20-30. ISSN 1913-9020

Saleh, Nor Shela and Yaacob, Hashim Fauzy and Mohd Shafie, Rosli (2015) Developing items using by pilot test, confirmatory factor analysis statistical in literacy for communication and supervision clinical elements provider. Mediterranean Journal of Social Sciences, 6 (2). pp. 202-214. ISSN 2039-9340

Saleh Elfallah, Saleh Suliman and Mohamed Yunus, Mohd Radzi and Abdullah, Hasan Zuhudi (2018) Effect of UV irradiation on apatite deposition on anodised TiO2 coating formed under mixed acid solution. International Journal of Current Science, Engineering & Technology, 1 (1). pp. 88-94. ISSN 2581-4311

Salihu, Ibrahim Anka and Ibrahim, Rosziati and Mustapha, Aida (2017) A hybrid approach for reverse engineering GUI model from android apps for automated testing. Journal of Telecommunication, Electronic and Computer Engineering, 9 (3-3). pp. 1-5. ISSN 2180-1843

Salihu, Rabiu and Abd Razak, Saiful Izwan and Ahmad Zawawi, Nurliyana and Abdul Kadir, Mohammed Rafiq and Ismail, Norjihada Izzah and Mat Nayan, Nadirul Hasraf and Jusoh, Norhana and Mohamad, Mohd Riduan (2021) Citric acid: a green cross-linker of biomaterials for biomedical application. European Polymer Journal, 146 (5).

Salihu, Rabiu and Abd Razak, Saiful Izwan and Ahmad Zawawi, Nurliyana and Shahir, Shafinaz and Sani, Mohd Helmi and Wsoo, Mohammed Ahmad and Mat Nayan, Nadirul Hasraf (2021) Catalyst-free crosslinking modification of nata-de- coco-based bacterial cellulose nanofibers using citric acid. Chitosan, Chitin, and Cellulose Nanofiber Biomaterials, 13 (17). pp. 1-21.

Salim, Siti Aisyah and Sedera, D. and .Sawang, S. (2015) Non-linear and linear postulations of technology adoption determinants. ARPN Journal of Engineering and Applied Sciences, 10 (23). pp. 1769-1789. ISSN 1819-6608

Salleh, Muhammad Mohamed and Ghazali, Mohd Hafiz and Md Salleh, Salihatun and Manshoor, Bukhari and Khalid, Amir and Shiau, Wei Chan and Zaman, Izzuddin (2022) Parametric analysis of sound transmission loss in a rectangular duct attached with resonator silencer. International Journal of Nanoelectronics and Materials, 15. pp. 355-364.

Salleh, Norhafizah and Mohd Sam, Abdul Rahman and Mohd Yatim, Jamalludin and A. Khalid, Nur Hafizah and Abdul Hamid, Noor Azlina and Jamellodin, Zalipah and A. Majid, Masni (2018) Effect of CFRP plate length on flexural behavior of GFRP reinforced concrete beam strengthening. Advanced Science Letters, 24 (6). pp. 3968-3973. ISSN 1936-6612

Salman, Ihsan and Mohammed Saffer, Khalid and H. Saf, Hayder and A. Mostafa, Salama and Khalaf, Bashar Ahmad (2023) Salp swarm and gray wolf optimizer for improving the efficiency of power supply network in radial distribution systems. Journal of Intelligent Systems. pp. 1-12.

Samsudin, Mohd Ali and Nordin, Norfarah and Syazwani, Ilya and Ismail, Mohd Erfy (2019) The effect of computerized-adaptive test on reducing anxiety towards math test for polytechnic students. Journal of Technical Education and Training, 11 (4). pp. 27-35. ISSN 2229-8932

Samsudin, Noor A. and Bradley, Andrew P. (2010) Nearest neighbour group-based classification. Pattern Recognition, 43. pp. 3458-3467.

Samsudin, Noor Azah and Aripin, Muhammad Syariff and Ahmad Khalid, Shamsul Kamal and Nordin, Nor Amirul Amri (2018) A simulation of energy recycling concept in automotive application using hybrid approach. Indonesian Journal of Electrical Engineering and Computer Science, 12 (1). pp. 412-419. ISSN 2502-4752

Samsudin, Shahifarhan and Rozali, Mohd Zulfadli and Ibrahim, Badaruddin and Hamdan, Nor Hidayah (2021) Level of mental toughness on academic achievement of student-athletes Universiti Tun Hussein Onn Malaysia (UHTM). Journal of Contemporary Issues in Business and Government, 27 (2). pp. 5581-5590. ISSN 2204-1990

Sapit, Azwan and Mohammed, Akmal Nizam and Razali, Mohd. Azahari and Hushim, Mohd Faisal Bin and Khalid, Amir and Manshoor, Bukhari (2016) Rapeseed oil spray development of diesel idi spray nozzle under air movement influence. ARPN Journal of Engineering and Applied Sciences, 11 (18). pp. 11183-11187. ISSN 1819-6608

Sarani, Noor Amira and Abdul Kadir, Aeslina and Md Din, Mohd Fadhil and Hashim, Azini Amiza and Hassan, Mohd Ikhmal Haqeem and Abdul Hamid, Nur Jannah and Hashar, Nurul Nabila Huda and Hissham, Nur Fatin Nabila and S.M. Johan, Siti Farhanah (2023) Physical-mechanical properties and thermogravimetric analysis of fired clay brick incorporating palm kernel shell for alternative raw materials. Construction and Building Materials, 376. pp. 1-18.

Saruan, Nurathirah and Abdullah, Norazlin and Muhammad, Norhayati and A. Talip, Balkis (2018) Effect of cooking time on physical properties of almond milk-based lemak cili api gravy. Journal of Science and Technology, 10 (2). pp. 104-107. ISSN 2229-8460

Sarwani, Muhamad Khairul Ilman and Fawzi, Mas and Mokhtar, Muhamad Hanif and Osman, Shahrul Azmir (2020) Performance and Emissions of 1.3L and 1.6L Engines Fueled with Gasoline and CNG at Several Vehicle Speeds. TEST Engineering & Management, 83. pp. 29133-29141. ISSN 0193-4120

Saufihamizal Ibrahim, Izrulfizal and Ibrahim, Rosziati and Mat Rejab, Mazidah (2023) Combinatorial Black Hole Algorithm: A Metaheuristic Approach for Combinatorial Testing. International Journal of Engineering Trends and Technology, 71 (4). pp. 21-28. ISSN 2231 – 5381

Sa’adan, Nadzrah and Taib, Siti Aishah and Saidalvi, Aminabibi and Ismail, Mohd Erfy (2022) Radio Drama in ESL Learning among Engineering and Business Students in UiTM Kampus Pasir Gudang. International Journal of Academic Research in Business and Social Sciences, 12 (5). pp. 1341-1351. ISSN 2222-6990

Sedik, Syazana Najiha and Mohd Kamaruddin, Nurul Hidayah (2022) Effect of blending parameters on physical properties of styrene-butadiene rubber coagulum modified asphalt binder. Recent Trends in Civil Engineering and Built Environment, 3 (1). pp. 132-138.

Selamat, Asri and Zaidi, Mohd Taufik Syazeli and Muhamad Hanafi, Nurfirdawati and Jumintono, Jumintono (2021) Teaching and learning assessment: an empirical study at Advanced Technology Training Center (ADTEC) Malaysia. Educational Administration: Theory and Practice, 27 (4). pp. 1180-1189.

Seng, Hua Lee and Ashaari, Zaidon and Wei, Chen Lum and Aik, Fei Ang and Abdul Halip, Juliana and Halis, Rasmina (2017) Chemical, physico-mechanical properties and biological durability of rubberwood particleboards after post heat-treatment in palm oil. Holzforschung, 72 (2). pp. 159-167. ISSN 0018-3830

Seswoya, Roslinda and Abdul Karim, Ahmad Tarmizi and Darnak, Nur Aiza and Abd Rahman, Muhammad Fahmi (2018) Methane potential from the digestion of food waste in a batch reactor. International Journal of Engineering & Technology, 7 (3.23). pp. 36-39. ISSN 2227-524X

Seyed Hakim, Seyed Jamalaldin and Noorzaei, Jamaloddin and Jaafar, M. S. and Mohammed Jameel, Mohammed Jameel and Mohammadhassani, Mohammad (2011) Application of artificial neural networks to predict compressive strength of high strength concrete. International Journal of the Physical Sciences, 6 (5). pp. 975-981.

Shaaf, Zakarya Farea and Abdul Jamil, Muhammad Mahadi and Ambar, Radzi (2023) A Convolutional Neural Network Model to Segment Myocardial Infarction from MRI Images. A Convolutional Neural Network Model to Segment Myocardial Infarction from MRI Images, 19 (2). pp. 150-162.

Shabir Hussain Khahro, Shabir Hussain Khahro and Haseeb Haleem Shaikh, Haseeb Haleem Shaikh and Noor Yasmin Zainun, Noor Yasmin Zainun and Basel Sultan, Basel Sultan and Qasim Hussain Khahro, Qasim Hussain Khahro (2023) Delay in Decision-Making Affecting Construction Projects: A Sustainable Decision-Making Model for Mega Projects. Sustainability, 15 (5872). pp. 1-22.

Shafii, Haryati and Musa, Sharifah Meryam Shareh (2010) Keselesaan ke tempat kerja mempengaruhi kualiti hidup masyarakat bandar di Mukim Kajang, Selangor. Nota Penyelidikan, 79. pp. 105-115.

Shafii, Haryati and Musa, Sharifah Meryam Shareh (2010) Pengangkutan di bandar: isu dan penyelesaian. Journal of Techno-Social. pp. 31-46.

Shah Ayop, Sallehuddin and J. Cairns, John (2012) Critical study of corrosion damaged concrete structures. International Journal of Integrated Engineering, 5 (2). pp. 43-50. ISSN 2229-838X

Shaharudin, S.M. and Ahmad, N. and Mohamed, N.S. and Mahdin, Hairulnizam (2020) Fitting statistical distribution of extreme rainfall data for the purpose of simulation. Indonesian Journal of Electrical Engineering and Computer Science, 18 (3). pp. 1367-1374. ISSN 2502-4752

Shahidan, S. and Ranle, N. A. and Mohd Zuki, S. S. and Khalid, F. Sheikh and Ridzuan, A. R. M. and Nazri, F. M. (2018) Concrete incorporated with optimum percentages of recycled Polyethylene Terephthalate (PET) bottle fiber. International Journal of Integrated Engineering, 10 (1). pp. 1-8. ISSN 2229-838X

Shahnaz Pirzada, Shahnaz Pirzada and Ab Rahman, Nurul Hidayah and Niken Dwi Wahyu Cahyan, Niken Dwi Wahyu Cahyan and Othman, Muhammad Fakri (2023) A Survey of Forensic Analysis and Information Visualization Approach for Instant Messaging Applications. International Journal of Advanced Computer Science and Applications, 14 (2). pp. 237-246.

Shahrol Nizam, Syafiqah Hanisah and Ab Rahman, Nurul Hidayah and Cahyani, Niken Dwi Wahyu (2020) Keyword indexing and searching tool (KIST): a tool to assist the forensics analysis of whatsapp chat. International Journal on Information and Communication Technology (IJoICT), 6 (1). pp. 23-30. ISSN 2460-9056

Shahzad, Asim and Mahdin, Hairulnizam and Mohd Nawi, Nazri (2020) An improved framework for content-based spamdexing detection. International Journal of Advanced Computer Science and Applications, 11 (1). pp. 409-420. ISSN 2158-107X

Shamala, Palaniappan and Ahmad, Rabiah and Yusoff, Mariana (2013) A conceptual framework of info structure for information security risk assessment (ISRA). Journal Of Information Security And Applications, 18. pp. 45-52.

Shamsudin, Shamsudin and Mohamaddan, Shahrol (2023) A hybrid controller method with genetic algorithm optimization to measure position and angular for mobile robot motion control. Robotic Control Systems, 9. pp. 1-14.

Shareh Musa, Sharifah Meryam and Selamat, Nurul Atiqah Nabilah and Md Yassin, Azlina and Shafii, Haryati (2018) Rain water harvesting management system in Zoo Negara, Selangor. Asian Journal of Environment, History and Heritage, 2 (1). pp. 67-75. ISSN 2590-4213

Shareh Musa, Sharifah Meryam and Senapi, Nurhafezawani and Shafii, Haryati and Md Yassin, Azlina and Zainal, Rozlin (2018) Importance of providing elemental landscape in Darulaman lake recreation area, Jitra, Kedah. Geograf, 6 (2). pp. 67-75. ISSN 2462-2400

Shareh Musa, Sharifah Meryam and Wan Husin, Hanis and Md Yassin, Azlina and Shafii, Haryati (2017) Aplikasi sistem penuaian air hujan (SPAH) di kawasan perumahan. Jurnal Tekno Sosial, 9 (2). pp. 1-18. ISSN 2229-8940 (In Press)

Sharif, Mohd Zamri bin and Lee, Ming Foong (2018) Analisis tahap kesukaran bagi topik dalam kursus teknologi elektrik 2 dari perspektif pelajar. Online Journal for TVET Practitioners (OJ-TP), 3 (1). pp. 1-6. ISSN 2289-7410

Sharif, S. and Ramli, A. S. and M. Said, A. Y. and Karim, Z. and A. Rahim, E. and Abdul Sani, A. S. (2019) Effect of cutting parameters on tool wear when trochoidal pocket milling Ti6Al4V. The International Journal of Integrated Engineering, 11 (4). pp. 159-165.

Sharif, Siti Rohaya and Charanjit Kaur Swaran Singh, Charanjit Kaur Swaran Singh and Eng Tek Ong, Eng Tek Ong and Mulyadi, Dodi and llmi Zajuli Ichsan, llmi Zajuli Ichsan and Henita Rahmayanti, Henita Rahmayanti and Tee Tze Kiong, Tee Tze Kiong (2023) The Use of i-THINK Mapping in Teaching Reading Comprehension among ESL Teachers. Studies in English Language and Education, 10 (1). pp. 78-95. ISSN 2355-2794

Sharif, Siti Rohaya and Swaran Singh, Charanjit Kaur and Eng Tek Ong, Eng Tek Ong and Mulyadi, Dodi and llmi Zajuli Ichsan, llmi Zajuli Ichsan and Rahmayanti, Henita and Tee Tze Kiong, Tee Tze Kiong (2023) The Use of i-THINK Mapping in Teaching Reading Comprehension among ESL Teachers. Studies in English Language and Education, 10 (1). pp. 78-95. ISSN 2355-2794

Sharif, Siti Rohaya and Swaran Singh, Charanjit Kaur and Ong, Eng Tek and Mulyadi, Dodi and Ichsan, llmi Zajuli and Rahmayanti, Henita and Kiong, Tee Tze (2023) The Use of i-THINK Mapping in Teaching Reading Comprehension among ESL Teachers. Studies in English Language and Education, 10 (1). pp. 1-18. ISSN 2355-2794

Sharma, Akhilesh Kumar and Jain, Antima and Deevesh Chaudhary, Deevesh Chaudhary and Tiwari, Shamik and Mahdin, Hairulnizam and Baharum, Zirawani and Shaharudin, Shazlyn Milleana and Maskat, Ruhaila and Arshad, Mohammad Syafwan (2023) An Approach to Automatic Garbage Detection Framework Designing using CNN. International Journal of Advanced Computer Science and Applications,, 14 (2). pp. 257-262.

Sies, M.F. and Hakim, M. Zikril and Pairan, M. Rasidi and Madlan, M.A. and Asmuin, N. and Zakaria, H. (2019) An investigational research of spray pattern for deflector flat spray nozzle using horizontal patternator. Test Engineering and Management, 81. pp. 733-740. ISSN 0193-4120

Sim, Pei Chin and Lee, Woon Kiow and Abdullah, Haslina and Talib, Norfazillah and Ong, Pauline and Saleh, Aslinda and Ahmad, Said and Sung, Aun Naa (2022) Prediction of tool wear using machine vision approach. ACADEMIC JOURNAL OF MANUFACTURING ENGINEERING, 20 (1). pp. 108-113.

Sim, S.Y. and Goh, H.H. and Utomo, W.M. and Buswig, Y.M.Y. and Lim, A.J.M.S. and Goh, K.C. and Zin, N.M. and Cham, C.L. and Ahmad, M.Y. (2018) A comparative study of conventional PID and intelligent Fuzzy-PID FordDC motor speed control. Journal of Fundamental and Applied Sciences, 10 (5S). pp. 282-297. ISSN 1112-9867

Siregar, Januar Parlaungan and Jaafar, Jamiluddin and Cionita, Tezara and Choo, Chee Jie and Bachtiar, Dandi and Mat Rejab, Mohd. Ruzaimi and Asmara, Yuli Panca (2019) The efect of maleic anhydride polyethylene on mechanical properties of pineapple leaf fibre reinforced polylactic acid composites. International Journal of Precision Engineering and Manufacturing-Green Technology. ISSN 2288-6206

Siti Juariah, Siti Juariah and Abu Bakar, Fazleen Izzany and Abu Bakar, Mohd Fadzelly and Endrini, Susi and Sri Kartini, Sri Kartini and Ningrum, Riska Surya (2023) Antibacterial Activity and Inhibition Mechanism of Red Ginger (Zingiber officinale var. rubrum) Ethanol Extract Against Pathogenic Bacteria. Journal of Advanced Research in Applied Sciences and Engineering Technology, 30 (1). pp. 145-157. ISSN 2462-1943

Siti Rohaya Sharif1, Siti Rohaya Sharif1 and Charanjit Kaur Swaran Singh, Charanjit Kaur Swaran Singh and Ong, Eng Tek and Mulyadi, Dodi and Ichsan, llmi Zajuli and Rahmayanti, Henita and Kiong, Tee Tze (2023) The Use of i-THINK Mapping in Teaching Reading Comprehension among ESL Teachers. Studies in English Language and Education,, 10 (1). pp. 78-95. ISSN 2355-2794

Sockalingam, Kanageswary and Abdullah, Hasan Zuhudi and Idris, Maizlinda Izwana (2022) Alteration of physico-mechanical properties of black tilapia scale gelatins using UVA and UVC irradiation. The International Journal of Integrated Engineering, 14 (1). pp. 150-156. ISSN 2229-838X

Soh, Hui Gian and Kasim, Shahreen and Hassan, Rohayanti and Zakaria, Zalmiyah and Mahdin, Hairulnizam and Ramli, Azizul Azhar and Md Fudzee, Mohd Farhan and Salamat, Mohamad Aizi (2019) Online activity duration management system for manufacturing company. Acta Electronica Malaysia (AEM), 3 (2). pp. 1-8. ISSN 2590-4043

Sohu, Samiullah and Abdullah, Abd Halid and Nagapan, Sasitharan and Ali Buriro, Ahsan and Kaleemullah, K. (2018) Stakeholders’ perception on critical cost variation factors in Malaysian building projects. Civil Engineering Journal, 4 (9). pp. 2075-2081. ISSN 2476-3055

Sohu, Samiullah and Abdullah, Abd Halid Bin and Ahmed Memon, Bashir and Nagapan, Sasitharan and Kareem Bhatti, Nadeem Ul (2018) Mitigation measures for significant factors instigating cost overrun in highway projects. Civil Engineering Journal, 4 (10). pp. 2338-2344. ISSN 2476-3055

Soomro, Dur Muhammad and Tawafan, Adnan Hasan and Jabbar, Feryal Ibrahim (2019) Methods in single phase to ground faults on power distribution systems. Journal of Engineering and Applied Sciences, 14 (7). pp. 10058-10066. ISSN 1816-949X

Soomro, Zubair Adil and Shamsudin, Abu Ubaidah and Abdul Rahim, Ruzairi and Adrianshah, Andi and Hazeli, Mohd (2023) Non-Verbal Human-Robot Interaction Using Neural Network for The Application of Service Robot. IIUM Engineering Journal, 24 (1). pp. 1-18.

Sorfina, Ummi and Islam, Syed Zahurul and Kok Boon Ching, Kok Boon Ching and Soomro, Dur Muhammad and Al-Fatta Yahaya, Jabbar (2023) Adaptive position control of DC motor for brush-based photovoltaic cleaning system automation. Bulletin of Electrical Engineering and Informatics, 12 (3). pp. 1293-1301. ISSN 2302-9285

Sri Kartini, Sri Kartini and Siti Juariah, Siti Juariah and Dini Mardhiyani, Dini Mardhiyani and Moh Fadzelly Abu Bakar, Moh Fadzelly Abu Bakar and Fazleen Izzani Abu Bakar, Fazleen Izzani Abu Bakar and Susi Endrini, Susi Endrini (2023) Phytochemical Properties, Antioxidant Activity and a- Amilase Inhibitory of Curcuma Caesia. Journal of Advanced Research in Applied Sciences and Engineering Technology, 30 (1). pp. 255-263. ISSN 2462-1943

Suboh, Syahirah and Abdul Aziz, Izzatdin and Shaharudin, Shazlyn Milleana and Ismail, Saidatul Akmar and Mahdin, Hairulnizam (2023) A Systematic Review of Anomaly Detection within High Dimensional and Multivariate Data. INTERNATIONAL JOURNAL ON INFORMATICS VISUALIZATION, 7 (1). pp. 122-130.

Subramaniam, Shivaraj and Abdullah, Abd Halid and Nagapan, Sasitharan and Kupusamy, Kumanan and Manian, Haritharan and Daud, Zawawi (2018) Investigate how construction waste generation rate is, different for every types of project in peninsular Malaysia, using site visit method. International Journal of Integrated Engineering, 10 (1). pp. 150-156. ISSN 2229-838X

Subramaniyan, S Kanna and Mahzan, Shahruddin and Ghazali, Mohd Imran and Ahmad Zaidi, Ahmad Mujahid and Prabagaran, Prasath Kesavan (2013) Energy absorption characteristics of polyurethane composite foam filled tubes subjected to quasi-static axial loading. Applied Mechanics and Materials, 315. pp. 872-878. ISSN 1660-9336

SuhailaAbd Halim, SuhailaAbd Halim and Yupiter H. P. Manurung, Yupiter H. P. Manurung and Raziq, Muhamad Aiman and ChengYee Low, ChengYee Low and Rohmad, Muhammad Saufy and John R. C. Dizon, John R. C. Dizon and Vladimir S. Kachinsky, Vladimir S. Kachinsky (2023) Quality prediction and classifcation of resistance spot weld using artifcial neural network with open‑sourced, self‑executable andGUI‑based application tool Q‑Check. Scientifc Reports. pp. 1-16.

Suhaimi, M. A. and A. Rahman, M. A. and Awang, Mariah and Akasah, Z. A. and Hashim, N. (2017) Problems associated with indoor air quality (IAQ) in classroom and recommended approaches. Politeknik & Kolej Komuniti Journal of Social Sciences and Humanities, 2 (1). pp. 24-30. ISSN 0128-2875

Suhaizal, Hashim and Abdul Rahman, Khairul Anuar and Khamis, Nurhani and Shukor, Ummi Hanani and Che Lah, Noor Hidayah and Zulkifli, Nurul Nadwa (2023) The Design and Development of Augmented Reality (AR) Application for Internet Evolution Learning Topics. The Design and Development of Augmented Reality (AR) Application for Internet Evolution…, 17 (5). pp. 162-181.

Sukor, J. Abdul and Redmond, S. J. and Lovell, N. H. (2011) Signal quality measures for pulse oximetry through waveform morphology analysis. Physiological Measurement, 32. pp. 369-384. ISSN 0967-3334

Sulaiman, Dawlat Mustafa and Abdulazeez, Adnan Mohsin and Asaad Zebar, Dilovan and Diyar Qader Zeebaree, Diyar Qader Zeebaree and A. Mostafa, Salama and Saleem Sadiq, Shereen (2023) An Attention-Based Deep Regional Learning Model for Enhanced Finger Vein Identification. Traitement du Signal, 39 (6). pp. 1991-2001.

Sulaiman, Dawlat Mustafa and Abdulazeez, Adnan Mohsin and Asaad Zebar, Dilovan and Zeebaree, Diyar Qader and Mostafa, Salama A. and Saleem Sadiq, Shereen (2022) An Attention-Based Deep Regional Learning Model for Enhanced Finger Vein Identification. Traitement du Signal, 39 (6). pp. 1-13. ISSN 1991-2002

Sulaiman, Noralfishah and Ismail, Maziah and Nazir, Umber and Abdul Latib, Siti Kursiah Kamalia and Muhammad Hafidz, Haridzah Fatihini and Mahmud, Nur Putri Najwa and Abid, Sheikh Kamran (2022) MOBILISE-UTHM Resilient Tracker (RITTER) for resilient educational communities in Malaysia during the COVID-19 pandemic. International Journal of Social Ecology and Sustainable Development, 13 (8). pp. 1-4.

Sulaiman, Wan Mohamad Hafiz and Jumintono, Jumintono and Wahyuniati, Christina Fajar Sri and Wiwik Suryandartiwi, Wiwik Suryandartiwi and Jaka Sunardi, Jaka Sunardi and Umar, Fadilah and Manoppo, Febri Kurnia and Yudanto, Yudanto and Hos, Jamaluddin (2020) Quickly understanding on progressive muscle relaxation with video-based learning in secondary school students. International Journal of Human Movement and Sports Sciences, 8 (5). pp. 181-185.

Sulistyo, S. and Ariffin, S. and Mahzan, S. (2013) Manufacturing of electrolyte and cathode layers SOFC using atmospheric spraying method and its characterization. Internat. J. of Sci. and Eng., 4 (1). pp. 30-33.

Sulistyo, S. and Arifin, Saparudin and Mahzan, Shahruddin (2013) The effect of pretreatment powder using ball mill and ultrasound on the properties of single cell solid oxide fuel cell. Applied Mechanics and Materials, 315. pp. 972-976. ISSN 1660-9336

Sulong, Nurulsaidatulsyida and Mohd Rus, Anika Zafiah and Mat Hassan, Nik Normunira and Marsi, Noraini (2018) Spectroscopic studies of oils and its synthesized bio-polymer. Journal of Mechanical Engineering, 5 (3). pp. 50-60. ISSN 1823- 5514

Sundararajan, Komala Devi and Ambak, Kamarudin and Daniel, Basil David and Abdul Sukor, Nur Sabahiah and Ishak, Siti Zaharah (2020) Willingness to use overhead bridge facilities based on theory of planned behavior. The International Journal of Integrated Engineering, 12 (4). pp. 232-240. ISSN 2229-838X

Sunitha V. Doraisamy, Sunitha V. Doraisamy and Zainal Abidin Akasah, Zainal Abidin Akasah (2015) 2014 Malaysia flood: Impacts & factors contributing towards the restoration of damages. Journal of Scientific Research and Development, 2 (14). pp. 53-59. ISSN 1115-7569

Supawi, Aiman and Ahmad, Said and Mohd Joharudin, Nurul Farahin and Karim, Fazida (2022) Surface integrity of RBD palm oil as a bio degradable oil based dielectric fluid on sustainable Electrical Discharge Machining (EDM) of AISI D2 steel. EVERGREEN Joint Journal of Novel Carbon Resource Sciences & Green Asia Strategy, 9 (1). pp. 41-48.

Suratkon, Azeanita and Azlan, Atiqah Syahmina (2021) Working from Home (WFH): challenges and practicality for construction professional personnel. International Journal of Sustainable Construction Engineering and Technology, 12 (4). pp. 11-19. ISSN 2180-3242

Susi Endrini, Susi Endrini and Abu Bakar, Fazleen Izzany and Abu Bakar, Mohd Fadzelly and Abdullah, Norazlin and Himmi Marsiati, Himmi Marsiati (2023) Phytochemical profiling, in vitro and in vivo xanthine oxidase inhibition and antihyperuricemic activity of Christia vespertilionis leaf. Biocatalysis and Agricultural Biotechnology, 48. pp. 1-9.

Suwoyo, Heru and Adriansyah, Andi and Andika, Julpri and Ubaidillah, Abu (2023) An Integrated RRT*SMART-A* Algorithm for solving the Global Path Planning Problem in a Static Environment. Mechatronics and Automation Engineering, 24 (1). pp. 1-16.

Swee, Kuan Loh and Swee, Thing Low and Lian, En Chai and Weng, Howe Chan and Mohamad, Mohd Saberi and Deris, Safaai and Ibrahim, Zuwairie and Kasim, Shahreen and Ali Shah, Zuraini and Mohd Jamil, Hamimah and Zakaria, Zalmiyah and Napis, Suhaimi (2018) A review of computational approaches to predict gene functions. Current Bioinformatics, 13 (4). pp. 373-386. ISSN 1574-8936

Syed Yahya, Syed Redha and Mohamad, Elmy Johana and Faizan Marwah, Omar Mohd and Nasir, Nur Nadia (2018) Tomography systems and sensor applications velocity measurement of gas bubbles flow in vertical water column using ultrasonic sensor. Journal of Tomography System & Sensors Application, 1 (1). pp. 41-47. ISSN 2636-9133

Syed Zahurul Islam, Ummi Sorfina1 and Boon Ching, Kok and Soomro, Dur Muhammad and Yahaya, Jabbar Al-Fatta (2023) Adaptive position control of DC motor for brush-based photovoltaic cleaning system automation. Bulletin of Electrical Engineering and Informatics, 12 (3). pp. 1-9. ISSN 2302-9285

Sze Hui Jong, Sze Hui Jong and Abdullah, Norazlin and Muhammad, Norhayati (2023) Optimization of low-methoxyl pectin extraction from durian rinds and its physicochemical characterization. Carbohydrate Polymer Technologies and Applications, 5. pp. 1-13. ISSN 100263

Sze Hui Jong, Sze Hui Jong and Abdullah, Norazlin and Muhammad, Norhayati (2023) Rheological characterization of low methoxyl pectin extracted from durian rind. Carbohydrate Polymer Technologies and Applications, 5. pp. 1-12.

TENGKU ZAINAL ABIDIN, TENGKU ZARITH HAZLIN and MAT ALI, NURIN NAJMINA and ABU BAKAR, FAZLEEN IZZANY and AHMAD BAKRI, FAIZNUR AIN and ABU BAKAR, MOHD FADZELLY and MALIK, NUR HAFIZAH and ZAINAL ABIDIN, MUNIRA (2023) Nutritional Composition and Antioxidant Activity of Freshwater Lobster in Malaysia: A Short Review. Asian Journal of Chemistry, 35 (2). pp. 301-304.

TENGKU ZARITH HAZLIN TENGKU ZAINAL ABIDIN, TENGKU ZARITH HAZLIN TENGKU ZAINAL ABIDIN and NURIN NAJMINA MAT ALI, NURIN NAJMINA MAT ALI and FAZLEEN IZZANY ABU BAKAR, FAZLEEN IZZANY ABU BAKAR and FAIZNUR AIN AHMAD BAKRI, FAIZNUR AIN AHMAD BAKRI (2023) Nutritional Composition and Antioxidant Activity of Freshwater Lobster in Malaysia: A Short Review. Asian Journal of Chemistry, 35 (2). pp. 1-4. ISSN 301-304

Tajul Baharuddin, M. F. and Othman, A. R. and Taib, S. and Hashim, R. and Zainal Abidin, M. H. and Radzuan, M. A. (2013) Evaluating freshwater lens morphology affected by seawater intrusion using chemistry-resistivity integrated technique: a case study of two different land covers in Carey Island, Malaysia. Environ Earth Sci, 69. pp. 2779-2797.

Tajurahim,, Nurul Ainina Nadhirah and Mahmood, Salwa and Mat Saman, Muhamad Zameri and Ngadiman, Nor Hasrul Akhmal (2022) Carbon footprint of 3D-printed bone tissue engineering scaffolds: an life cycle assessment study. International Journal of Environmental Science and Development, 13 (3). pp. 63-69.

Talib, Norfazillah and Sabri, Ainaa Mardhiah and Zolkefli, Ariff Azizi and Kai, Sheng Tan and Kunar, Sandip (2022) Tribological enhancement of modified jatropha oil by activated carbon nanoparticle for metalworking fluid application. Jurnal Tribologi, 33. pp. 113-124. ISSN 2289-7232

Tambichik, Muhammad Afiq and Abdul Samad, Abdul Aziz and Mohamad, Noridah and Mohd Ali, Ahmad Zurisman and Mydin, Md Azree Othuman and Mohd Bosro, Mohamad Zulhairi and Iman, Muhamad Afif (2018) Effect of combining palm oil fuel ash (POFA) and rice husk ash (RHA) as partial cement replacement to the compressive strength of concrete. International Journal of Integrated Engineering, 10 (8). pp. 61-67. ISSN 2229-838X

Tanaka, Koki and Ijima, Katsushi and Obiya, Hiroyuki and Zakaria, Muhammad Nizam bin (2018) Mechanically rational forms of curved surface structures shaped from the uniform strain elements. International Journal of Integrated Engineering, 24 (6). pp. 87-92. ISSN 2229-838X

Tee, Tze Kiong and Abd Nasir, Nuraliah and Azid, Nurulwahida and Mohamad, Mimi Mohaffyza and Wu, Ming Chang and Swaran Singh4, Charanjit Kaur (2022) Issues and solutions on Inventive Problems-Solving Skills (IPSS) in invention course. Cakrawala Pendidikan Jurnal Ilmiah Pendidikan, 41 (2). pp. 468-480.

Tee, Tze Kiong and Ahmad Puad, Farah Najwa and Kamis, Arasinah and Yee, Mei Heong and Abd Hamid, Ruhiana Idayu and Shafie, Sharifah and Abu Bedor, Sarimah (2022) Enhancing cosmetology students’ communication skills in Malaysian upper secondary vocational education program. International Journal of Evaluation and Research in Education (IJERE), 11 (1). pp. 260-271. ISSN 2252-8822

Tee, Tze Kiong and Ramlan, Aryati and Azman, Mohamed Nor Azhari and Bagus, Nur Rahma Putra Andika and Sukardi, Sukardi and Risfendra, Risfendra and Abd Hamid, Ruhiana Idayu (2022) Mastery issues and teaching approaches for the electrical technology certificate programme at community colleges on the topic of measuring instruments. Asian Pendidikan, 2 (1). pp. 1-7. ISSN 2735-2331

Teo, Kenneth Tze Kin and Pei, Yi Lim and Bih, Lii Chua and Hui, Hwang Goh and Min, Keng Tan (2016) Particle swarm optimization based maximum power point tracking for partially shaded photovoltaic arrays. International Journal of Simulation: Systems, Science and Technology, 17 (34). 20.1-20.7. ISSN 1473-8031

Teo, Yang Kiat and Jumintono, Jumintono and Kriswanto, Erwin Setyo and Sugiri, Sugiri and Etty Handayani, Etty Handayani and Yunita Anggarini, Yunita Anggarini and Mochamad Rofik, Mochamad Rofik (2020) The effectiveness of multimedia learning on academic achievement in reproduction topic science subject. Universal Journal of Educational Research, 8 (8). pp. 3625-3629.

Tezara, Cionita and Hadi, Agung Efriyo and Siregar, Januar Parlaungan and Muhamad, Zalinawati and Mohamad Hamdan, Mohammad Hazim and Oumer, Ahmed Nurye and Jaafar, Jamiluddin and Irawan, Agustinus Purna and Teuku Rihayat, Teuku Rihayat and Fitriyana, Deni Fajar (2021) The effect of hybridisation on mechanical properties and water absorption behaviour of woven jute/ramie reinforced epoxy composites. Polymers, 13. pp. 1-17. ISSN 2073-4360

Tham, Cheong Sheng and Awang, Mariah and Abdul Rahman, Mohammad Ashraf (2017) Preliminary study of energy and cost saving potential of lighting system in teaching building. Politeknik & Kolej Komuniti Journal of Social Sciences and Humanities, 2 (1). pp. 160-166. ISSN 0128-2875

Thierry, Ellena and Mustafa, Helmy and Subic, Aleksandar and Pang, Toh Yen (2018) A design framework for the mass customisation of custom-fit bicycle helmet models. International Journal of Industrial Ergonomics, 64. pp. 122-133. ISSN 0169-8141

Tighnavard Balasbaneh, Ali and Sher, Willy and Yeoh, David and Yasin, Mohd Norazam (2022) Economic and environmental life cycle perspectives on two engineered wood products: comparison of LVL and GLT construction materials. Environmental Science and Pollution Research. pp. 1-18. ISSN 26964–26981

Tilabi, Sara and Tasmin, Rosmaini and Takala, Josu and Muazu, M.H. and A.H., Nor Aziati and Shafiee, A.R. and Kaprawi, Noraini and Che Rusuli, M.S. (2019) Assessment of technology factor in companies’ business strategy with the use of sense and respond method. Management and Production Engineering Review, 10 (3). pp. 81-89. ISSN 20808208

Tong, Y. G. and Tang, S. K. (2013) Plenum window insertion loss in the presence of a line source—a scale model study. The Journal of the Acoustical Society of America, 133 (3). pp. 1458-1467.

Tukimon, Mohd Faizal and Abd. Rahman, Hamimah and Amirnordin, Shahrin Hisham and Yusop, Umira Asyikin and Jaidi, Zolhafizi and Ismail, Azzura and Ahmad, Sufizar and Mohd. Halil, Aiman (2022) Important parameters of laser welding for metallic materials interconnect in fuel cell: a short review. Malaysian Journal of Microscopy, 18 (1). pp. 158-176. ISSN 1823-7010

Uddin, S. and Mohamad, M. and Gorji, Mohammad Rahimi and Roslan, R. and M. Alarifi, Ibrahim (2020) Fractional electro-magneto transport of blood modeled with magnetic particles in cylindrical tube without singular kernel. Microsystem Technologies, 26. pp. 405-414. ISSN 0946-7076

Umar, Fadilah and Purnama, Sapta Kunta and Hidayatullah, Mohammad Furqon and Jumintono, Jumintono and Hanief, Yulingga Nanda and Sri Sumarni, Sri Sumarni and Ellyas, Intan Suraya and Fadian, Ulfa Fatahara Laras (2020) Increasing speed and agility of cerebral palsy football Indonesian player with UMAC-CPF exercise model. International Journal of Human Movement and Sports Sciences, 8 (6). pp. 329-336.

Umar, Muhammad Akilu and Kasim, Rozilah and Martin, David and Abubakar, Muhammad and Umar, Muhammad Bello and Ahmed, Tanko Husseini (2018) A framework to evaluate service user experience as a tool to achieve service excellence in Malaysian Local Governments. Journal of Advanced Research in Dynamical and Control Systems, 10 (6). pp. 1-8. ISSN 1943-023X

Ummi Sorfina, Ummi Sorfina and Syed Zahurul Islam, Syed Zahurul Islam and Kok Boon Ching, Kok Boon Ching and Dur Muhammad Soomro, Dur Muhammad Soomro and Jabbar Al-Fatta Yahaya, Jabbar Al-Fatta Yahaya (2023) Adaptive position control of DC motor for brush-based photovoltaic cleaning system automation. Bulletin of Electrical Engineering and Informatics, 12 (3). pp. 1293-1301. ISSN 2302-9285

Umpi, Jerry and Khamidun, Mohd Hairul and Abdullah, Mohd Daud (2022) Assessment and mapping of ammonium concentration in swale around Faculty of Civil Engineering and Built Environment and G3 Lake, Universiti Tun Hussien Onn Malaysia, (UTHM). Journal of Advancement in Environmental Solution and Resource Recovery, 2 (1). pp. 35-3.

Urooj Gul Sandilo, Urooj Gul Sandilo and Amir Detho, Amir Detho and Asif Ali Memon, Asif Ali Memon and Abdul Qayoom Jakhrani, Abdul Qayoom Jakhrani and Abdul Kadir, Aeslina (2023) Equilibrium and Mechanism of Removal of Total Dissolved Solids and Hardness by Adsorption onto Neem Seed Powder Adsorbent. Water Air Soil Pollut. pp. 1-13.

Utomo, Hadi Prasetyo and Bon, Abdul Talib and Hendayun, Mokhamad (2017) Modeling of academic information system in higher education institution toward education 3.0: a literature review. International Journal of Information and Education Technology, 7 (10). pp. 738-742. ISSN 2010-3689

V. Kuppulakshmi, V. Kuppulakshmi and C. Sugapriya, C. Sugapriya and J. Kavikumar, J. Kavikumar and D. Nagarajan, D. Nagarajan (2023) Fuzzy Inventory Model for Imperfect Items with Price Discount and Penalty Maintenance Cos. Mathematical Problems in Engineering. pp. 1-15.

Vajravelu, Ashok and Tamil Selvan, K.S. and Abdul Jamil, Muhammad Mahadi and Jude, Anitha and Torre Diez, Isabel de la (2023) Machine learning techniques to detect bleeding frame and area in wireless capsule endoscopy video. Journal of Intelligent & Fuzzy Systems, 44. pp. 353-364.

W. Z., Teoh and Hamdan, R. (2022) Feasibility study of agriculture by-product in removing heavy metals in wastewater through adsorption. Recent Trends in Civil Engineering and Built Environment, 3 (1). pp. 1492-1500.

W.A.S., Wan Hassan and Ariffin, Ahmad Hamdan and F., Ahmad and S.N.M., Sharberi and M. I., Nor Azizi and Zulkiflee, S.N. (2020) COVID-19 Pandemic: Langkawi Vocational College Student Challenge in Using Google Classroom for Teaching and Learning (T&L). International Journal of Advanced Trends in Computer Science and Engineering, 9 (3). pp. 3299-3307. ISSN 2278-3091

Wagiman, Khairul Rijal and H. Shareef, S. N. Khalidb (2017) Location of voltage sag source by using artificial neural network. Jurnal Teknologi, 79 (2). pp. 11-30.

Wahab, Norhaliza and Abu Talib, Mohd Khaidir and Abd Malik, Ahmad Khairul and Madun, Aziman (2023) Effect of cement stabilized peat on strength, microstructure, and chemical analysis. Physics and Chemistry of the Earth, 129. pp. 1-8.

Wahab, Norhaliza and Abu Talib, Mohd Khaidir and Madun, Aziman and Abd Malik, Ahmad Khairul (2023) Effect of cement stabilized peat on strength, microstructure, and chemical analysis. Physics and Chemistry of the Earth, 129. pp. 1-7. ISSN 1474-7065

Waheed Ali Laghari, Waheed Ali Laghari and Audrey Huong, Kim Gaik Tay, Audrey Huong, Kim Gaik Tay and Chang Choon Chew, Chang Choon Chew (2023) Dorsal Hand Vein Pattern Recognition: A Comparison between Manual and Automatic Segmentation Methods. Healthc Inform Res, 29 (2). pp. 152-160. ISSN 2093-3681

Wahhad, Ali M. and M. Elfaghi, Abdulhafid (2018) Numerical simulation of natural ventilation for full-scale office in Malaysia. International Journal of Scientific & Technology Research, 7 (12). pp. 36-39. ISSN 2277-8616

Wahid, Khairul Anuar and Abdul Rahim, Irfan and Safri, Syafiqah Nur Azrie and Ariffin, Ahmad Hamdan (2023) Synthesis of ZnO Nanorods at Very Low Temperatures Using Ultrasonically Pre-Treated Growth Solution. Processes, 11 (3). pp. 1-10.

Wahid, Khairul Anuar and Abdul Rahim, Irfan and Safri, Syafiqah Nur Azrie and Hamdan Ariffin, Ahmad (2023) Synthesis of ZnO Nanorods at Very Low Temperatures Using Ultrasonically Pre-Treated Growth Solution. Processes, 11 (708). pp. 1-10.

Wahid, Norfaradilla and Kasim, Shahreen (2018) Expressing dynamic XML inclusion dependencies. Advanced Science Letters, 24 (3). pp. 1745-1748. ISSN 1936-6612

Wahyu Cahyani, Niken Dwi and Martin, Ben and Kim-Kwang, Raymond Choo and Ab Rahman, Nurul Hidayah and Ashman, Helen (2018) An evidence-based forensic taxonomy of Windows phone communication apps. Journal of Forensic Sciences, 63 (3). pp. 868-881. ISSN 1556-4029

Wan Ibrahim, Wan Mastura and Hussin, Kamarudin and Abdullah, Mohd Mustafa Al Bakri and Abdul Kadir, Aeslina and Deraman, Laila Mardiah and Sandu, Andrei Victor (2017) Influence of foaming agent/water ratio and foam/geopolymer paste ratio to the properties of fly ash-based lightweight geopolymer for brick application. Indian Journal of Science and Technology, 68 (9). pp. 1978-1982. ISSN 0974-5645

Wan Ikhsan, Syarifah Nazirah and Abdullah, Norfadhilatuladha and Yusof, Norhaniza and Aziz, Farhana and Misdan, Nurasyikin and Wan Salleh, Wan Norhayati and Ismail, Ahmad Fauzi (2017) Preparation and characterisation of polyethersulfone/ hydrous ferric oxide mixed matrix membranes with improved hydrophilicity for treatment of oily waste water. Chemical engineering transactions, 56 (NIL). pp. 175-180. ISSN 2283-9216

Wan Kadir, Wan Muhamad Hanif and Samin, Reza Ezuan and Ibrahim, Babul Salam Kader (2012) Internet controlled robotic arm. International Symposium on Robotics and Intelligent Sensors 2012 (IRIS 2012), 41. pp. 1065-1071.

Wan Muhammad, Wan Nur Azrina and Mohamad, Md Nor Anuar and Tukimon, Mohd Faizal (2022) Characterization and heat transfer performance of quarternary nitrate based molten salts. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 97 (1). pp. 35-46.

Waseem Alwan, Waseem Alwan and Ngadiman, Nor Hasrul Akhmal and Adnan Hassan, Adnan Hassan and Syahril Ramadhan Saufi, Syahril Ramadhan Saufi and Mahmood, Salwa (2023) Ensemble Classifier for Recognition of Small Variation in X-Bar Control Chart Patterns. Machines, 11 (1). pp. 1-33.

Wei Mun Cheong, Wei Mun Cheong and Mohd Zaid, Mohd Hafiz and Yap Wing Fen, Yap Wing Fen and Tan Sin Tee, Tan Sin Tee and Matori, Khamirul Amin and Zhi Wei Loh, Zhi Wei Loh and Mayzan, Mohd Zul Hilmi (2023) Enhancing orange-reddish emission of the Sm3+-doped ZnO-B2O3-SLS glasses for the potential glass phosphor material. Optics and Laser Technology, 158. pp. 1-10.

Wibawa, Pratama Jujur and Saim, Hashim and Agam, Mohd. Arif and Nur, Hadi (2011) Design, preparation and characterization of polystyrene nanospheres based-porous structure towards uv-vis and infrared light absorption. 2011 International Conference on Physics Science and Technology (ICPST 2011), 22. pp. 524-531.

Xavier, Navis Ryan and Abdullah, Norazlin and Muhammad, Norhayati and Mohd Rozalli, Norazatul Hanim (2017) Effect of combining ultrasound with osmotic pre-treatment on osmotic characteristics of pomelo peel. Journal of Science and Technology, 9 (4). pp. 102-108. ISSN 2600-7924

Xian Wen Sim, Xian Wen Sim and Sie Long Kek, Sie Long Kek and Sy Yi Sim, Sy Yi Sim and Jiao Li, Jiao Li (2023) State Estimation and Optimal Control of Four-Tank System with Stochastic Approximation Approach. Advances in Technology Innovation,, 8 (2). pp. 150-161.

Yaacob, Siti Salwani and Mahdin, Hairulnizam and Saedudin, RD Rohmat and Ahmad Hijazi, Mohd Hanafi and Azmi, Mohd Sanusi and Rais, Nor Azlina (2018) A review on complex event processing in RFID system. International Journal on Advanced Science Engineering Information Technology, 8 (4). pp. 1154-1159. ISSN 2088-5334

Yaakob, Maizatul Azrina and Radin Mohamed, Radin Maya Saphira and Al-Gheethi, Adel Ali Saeed and Mohd Kassim, Amir Hashim (2018) Characteristics of chicken slaughterhouse wastewater. Chemical Engineering Transactions, 63. pp. 637-642. ISSN 2283-9216

Yabagi, Jibrin Alhaji and Kimpa, Mohammed Isah and Muhammad, Muhammad Nmaya and Nayan, Nafarizal and Embong, Zaidi and Agam, Mohd Arif (2017) Nanofabrication process by reactive ion etching of polystyrene nanosphere on silicon surface. Journal of Science and Technology, 9 (3). pp. 145-153. ISSN 2229-8460

Yaccub, Amir and Mustafa, Farahiyah and Mohd Asry, Anis Maisarah and Norjali, Rasida and Sim, Sy Yi and Zambri, Nor Aira (2020) A hybrid solar-battery-supercapacitor based camping lamp. Advances in Computing and Intelligent System, 2 (2). pp. 1-4. ISSN 2682-7426

Yahaya, Muhammad Hazziq and Mustafa, Mohamad Zaid and Ahad, Rosnee (2019) The effectiveness of programmable logic controller teaching aids for control system module in vocational college. Universal Journal of Educational Research, 7 (12A). pp. 51-59. ISSN 2332-3205

Yap, Wan Heong and Abas, Nor Haslinda and Rahmat, Muhamad Hanafi and Mohammad, Hairuddin (2022) Preventive measures of struck-by accidents at the construction site: Perspectives from construction personnel in Johor. INTERNATIONAL JOURNAL OF SUSTAINABLE Building Technology and Urban Development, 13 (2). pp. 165-176. ISSN 2093-761X

Yasin, Mohd Norazam and Mohamad Zin, Rosli and Abdullah, Abd Halid and Mahmad, Muhammad Shafiq and Hasmori, Muhammad Fikri (2017) The most common problem facing by the maintenance department: a case study between Universiti Tun Hussein Onn Malaysia (UTHM) and Universiti Teknologi Malaysia (UTM). IOP Conference Series: Materials Science and Engineering (MSE), 271 (NIL). pp. 1-7. ISSN 1757-8984

Yee, M. H. and Mahmad, M. F. and Tee, T. K. and Kok, B. C. and N., Azid (2021) The level of Marzano higher-order thinking skills among polytechnic students. HONG KONG JOURNAL OF SOCIAL SCIENCES, 57. pp. 381-388.

Yee, M. H. and Mohamad, N. A. and Ahmad Zubir, R. A. and Kok, B. C. and Tee, T. K. (2019) Polytechnic student’s readiness towards project based employment. International Journal of Engineering and Advanced Technology (IJEAT), 9 (2). pp. 4281-4286. ISSN 2249 – 8958

Yee, Yong Lee and Md Din, Mohd Fadhil and Noor, Zainura Zainon and Iwao, Kenzo and Mat Taib, Shazwin and Singh, Lakhveer and Abd Khalid, Nur Hafizah and Anting, Nickholas and Aminudin, Eeydzah (2018) Surrogate human sensor for human skin surface temperature measurement in evaluating the impacts of thermal behaviour at outdoor environment. Measurement, 118. pp. 61-72. ISSN 0263-2241

Yong, Seh Sheh and Hanapi, Zaliza and Mustapha, Ramlee and Tee, Tze Kiong (2020) Soft skills among hearing impaired graduates for sustainability and well-being in workplace. International Journal of Academic Research in Business and Social Sciences, 10 (5). pp. 191-206. ISSN 2222-6990

Yosza Dasril, Yosza Dasril and Much Aziz Muslim, Much Aziz Muslim and M. Faris Al Hakim, M. Faris Al Hakim and Jumanto, Jumanto and Budi Prasetiyo, Budi Prasetiyo (2023) Credit Risk Assessment in P2P Lending Using LightGBM and Particle Swarm Optimization. Jurnal Ilmiah Teknologi Sistem Informasi, 9 (1). pp. 16-28. ISSN 2502-3357

Yulianti, Ian and Marwoto, Putut and Astuti, Budi and D P Fianti, Ngurah Made and Paradita, Dhea and Darsono, Teguh and Ngajikin, Nor Hafizah and Yaacob, Maslina and Cholan, Noran Azizan (2023) Unsaturated polyester resin/polymethylmethacrylate waveguide-based refractive index sensor with dual wavelength temperature compensation. Measurement Science and Technology, 34. pp. 1-11.

Yunos, Jailani Md and Sern, L. C. and Hamdan, Nor Hidayah (2018) The roles of government and leadership towards the sustainability of TVET teacher education program. Advanced Science Letters, 24 (1). pp. 353-355. ISSN 1936-7317

Yunus, Zalilah Murni and Othman, Norzila and Hamdan, Rafidah and Ruslan, Nurun Najwa and Abu Kasin, Norfarihah and Leman, Nur Solini Activated carbon from honeydew rind as an adsorbent in zinc removal from aqueous solutions. Applied Mechanics and Materials, 773-77. pp. 1246-1250. ISSN 1662-7482

Yusof, Aiman and Kamarudin, Noraziahtulhidayu and Al-Emad, Nabil Ali and Sapuan, Khusairi (2023) Durian Farm Threats Identification through Convolution Neural Networks and Multimedia Mobile Development. International Journal of Emerging Technology and Advanced Engineering, 13 (3). pp. 8-15. ISSN 2250-2459

Yusof, Hanita and Ibrahim, Fawazul Khair and Raja Shahminan, Raja Nafida (2020) Heritage identity conservation of the woodcarving placement and design composition typologies on Johor Malay houses. PLANNING MALAYSIA: Journal of the Malaysian Institute of Planners, 18 (2). pp. 12-23. ISSN 1675-6215

Yusof, M.M.M and Salleh, S.M. and Ainul, H.M.Y and Siswanto, W.A. and Mahmud, W.M.A.W (2018) Analysis of Golfer‘s brainwave signal during par tee Ireland and driving range game. International Journal of Engineering & Technology, 7 (4.3). pp. 469-472. ISSN 2227-524X

Yusof, Yusmarwati and Bako, Ibrahim Haruna and Roddin, Rohayu and Mukhtar, Marina Ibrahim and Hamid, Hashima (2023) Competencies Needed for Improving Teaching Among Lecturers of Polytechnics in North-Western Nigeria. JOURNAL OF TECHNICAL EDUCATION AND TRAINING, 15 (1). pp. 1-8. ISSN 2229-8932

Yusof, Z.M. and Farn, W.S. and Leow, C.S. and Lee, J.C. (2023) Rock point load test (PLT index) and its correlation with rock coring rate of bored pile machine. Physics and Chemistry of the Earth, 129. pp. 1-12.

Yusoff, Aiman and Kamarudin, Noraziahtulhidayu and Al-Emad, Nabil Ali and Sapuan, Khusairi (2023) Durian Farm Threats Identification through Convolution Neural Networks and Multimedia Mobile Development. International Journal of Emerging Technology and Advanced Engineering, 13 (2). pp. 8-15. ISSN 2250-2459

Yusoff, Zailin Shah and Alwi, N. A. N. and Latiff, Azmi Abdul and Sayadi, Z. A. and Sukiman, S. L. and Mizad, Meizareena (2018) Development of cognitive presence in an L2 task-based community of inquiry. Journal of Advance Research in Dynamical & Control Systems, 10 (9). pp. 353-356. ISSN 1943-023X

Yusop, Umira Asyikin and Abd Rahman, Nurul Farhana and Anak Lowrance, Yohannes Nyambong and Jaidi, Zolhafizi and Tukimon, Mohd Faizal and Azmi, Mohd Azham and Ismail, Azzura and Mahzan, Shahruddin and Abd Rahman, Hamimah (2022) Effect of nb and zn element doping on barium strontium cobalt ferrite-based cathode for solid oxide fuel cell – a short review. Malaysian Journal of Microscopy, 18 (1). pp. 226-244. ISSN 1823-7010

Z. A., M. Hazreek and Z., M. Nizam and M., Aziman and M. F., Md Dan and M. Z., N. Shaylinda and T. B., M. Faizal and M. A., N. Aishah and Ambak, K. and Rosli, S. and Rais, Y. (2018) Mapping on slope seepage problem using Electrical Resistivity Imaging (ERI). Journal of Physics: Conference Series, 995 (1). pp. 1-10. ISSN 1742-6588

Zaimuddin, Izzatun Nazurah and Kandasamy, Ramasamy and Aman, Fazlina (2020) Heat Source/Sink on MHD Flow of Dusty Nano fluid over a Stretching Surface with Volume Fraction of Dust Particle. Jour of adv research in dynamical & control systems, 12 (2). pp. 664-672. ISSN 1943-023X

Zainal Abidin, Hafzaliza Erny and Poh, Choon Ooi and Teck, Yaw Tiong and Marsi, Noraini and Ismardi, Abrar and Mohd Noor, Mimiwaty and Nik Zaini Fathi, Nik Amni Fathi and Abd Aziz, Norazreen and Sahari, Siti Kudnie and Sugandi, Gandi and Yunas, Jumril and Chang, Fu Dee and Majlis, Burhanuddin Yeop and Hamzah, Azrul Azlan (2020) Stress and deformation of optimally shaped silicon microneedles for transdermal drug delivery. Journal of Pharmaceutical Sciences, 109 (8). pp. 2485-2492. ISSN 0022-3549

Zainal Abidin, Mohd Hazreek and Adnan, Mohd Shalahudin and Madun, Aziman and Abu Talib, Mohd Khaidir and Kamarudin, Ahmad Fahmy and Mohamad Ismail, Mohd Ashraf and Ishak, Mohd Fakhrurrazi (2018) The performance of earth retention pond water retain capability using geotechnical properties evaluation. International Journal of Engineering & Technology, 7 (4.3). pp. 257-263. ISSN 2227-524X

Zainal Abidin, Mohd Hazreek and Saad, Rosli and Wijeyesekera, Devapriya Chitral and Ahmad, Fauziah (2013) Soil resistivity influence due to the different utilization of electrical resistivity array. Electronic Journal of Geotechnical Engineering, 18. pp. 5643-5654.

Zainal Abidin, Mohd Hazreek and Saad, Rosli and Wijeyesekera, Devapriya Chitral and Ahmad, Fauziah and Tajul Baharuddin, Mohamad Faizal and Ahmad Tajudin, Saiful Azhar and Madun, Aziman (2017) The influences of basic physical properties of clayey silt and silty sand on its laboratory electrical resistivity value in loose and dense conditions. Sains Malaysiana, 46 (10). pp. 1959-1969. ISSN 0126-6039

Zainal Abidin, Nabilah and Akasah, Zainal Abidin Akasah and Husin, Muhammad Riduwan (2013) A preliminary design of janazah washing area: upholding human dignity in the last rite-diversity among different. The International Journal of Social Sciences, 8 (1). pp. 103-122.

Zainal Alam, Muhd Nazrul Hisham and Kamaruddin, Mohd Johari and Adzila, Sharifah and Nordin, Normayati and Othman, Raudhah (2022) Solar-powered aquaponics prototype as sustainable approach for food production. Materials Today: Proceedings, 65. pp. 2953-2959.

Zainal Alam, Muhd Nazrul Hisham and Kamaruddin, Mohd Johari and Samsudin, Sani Amril and Othman, Raudhah and Mohammad Radzi, Nur Hanis and Emmanuel, Abioye Abiodun and Zainal Abidin, Mohamad Shukri (2023) SMART FARMING USING A SOLAR-POWERED AQUAPONICS SYSTEM FOR SUSTAINABLE FOOD PRODUCTION. Malaysian Journal of Science, 42 (1). pp. 68-77. ISSN 1394-3065

Zainal Alama, Muhd Nazrul Hisham and Samsudin, Sani Amril and Kamaruddin, Mohd Johari and Zakaria, Zaki Yamani and Othman, Raudhah (2022) Introducing arduino as an effective online distance learning tool in final year project for chemical engineering student. ASEAN Journal of Engineering Education, 6 (1). pp. 69-82.

Zainol, Nur Zainatul Nadra and Abdul Majid, Latifah and Abd Kadir, Muhd Najib (2015) Implications of Nasr Hamid Abu Zayd’s interpretations on women issues in the Al-Qur’an. Islamiyyat The International Journal Of Islamic Studies, 37 (2). pp. 153-161. ISSN 0126-5636

Zainol Abidin, Mohamad Hafiz and Mohamad, Mahmod Abd Hakim and Ahmad Zaidi, Ahmad Mujahid and Wan Mat, Wan Ali (2013) Experimental study on ballistic resistance of sandwich panel protection structure with kenaf foam as a core material against small arm bullet. Applied Mechanics and Materials, 315 (NIL). pp. 612-615. ISSN 1660-9336

Zainol Abidin, Nurul Alyani and Kormin, Faridah and Zainol Abidin, Nurul Akhma and Abu Bakar, Mohd Fadzelly and Moujdin, Iqbal Ahmed (2023) Synthesis and Characterization of Curcumin-Chitosan Loaded Gold Nanoparticles by Oryctes rhinoceros’ Chitin for Cosmeceutical Application. Molecules, 28 (1799). pp. 1-12.

Zainudin, Fathin Liyana and Mahamad, Abd Kadir and Saon, Sharifah and Yahya, Musli Nizam (2018) Prediction of classroom reverberation time using neural network. Journal of Physics: Conference Series, 995. pp. 1-8. ISSN 1742-6588

Zainudin, Noraina Alia and Nazari, Ain and Mustafa, Mohd Marzuki and Wan Zakaria, Wan NurShazwani and Suriani, Nor Surayahani and Wan Kairuddin, Wan Nur Hafsha (2020) Glaucoma detection of retinal images based on boundary segmentation. Indonesian Journal of Electrical Engineering and Computer Science, 18 (1). pp. 377-384. ISSN 2502-4752

Zainuri, Nur Zarifah and Hairom, Nur Hanis Hayati and Abu Bakar Sidik, Dilaelyana and Desa, Amira Liyana and Misdan, Nurasyikin and Yusof, Norhaniza and Mohammad, Abdul Wahab (2018) Palm oil mill secondary effluent (POMSE) treatment via photocatalysis process in presence of ZnO-PEG nanoparticles. Journal of Water Process Engineering, 26. pp. 10-16. ISSN 2214-7144

Zakaria, Normah and Jamaludin, Nur Hasliza and Naim, Nor Azlin and Nur Azzarina, Khamis (2015) Leadership style head of polytechnic department and regard with to work culture. Journal of Education and Practice, 6 (15). pp. 23-30. ISSN 2222-1735

Zakaria, Nur Hamizah and Sulong, Muhammad Suhaimi and Abdul Hamid, Norashikin (2022) Student satisfaction on service quality: a study at Malaysian public university. ANP JOURNAL OF SOCIAL SCIENCE AND HUMANITIES, 3 (1). pp. 33-41. ISSN 2773-482x

Zalkepali, N U H H and Mahmud, N N H E N and Awang, N A and Muhammad, N A M and Zamri, A Z M (2023) Influence of thickness on tunability performance of plasma sputtered indium tin oxide as Q-switcher. Laser Physics, 33. pp. 1-9.

Zalkepali, N.U.H.H. and Awang, N.A. and Ghosh, B.K. and Mohamad, K.A. and Alias, A. and Mahmud, N.N.H.E.N. and Zamri, A.Z.M. and Muhammad, N.A.M. (2023) Tunable performance of indium tin oxide-zinc oxide as Q-switcher. Optik, 281. pp. 1-11.

Zalkepali,, N U H H and Mahmud, N A Awang, N N H E N and Muhammad, N A M and Zamri, A Z M (2023) Influence of thickness on tunability performance of plasma sputtered indium tin oxide as Q-switcher. Laser Physics. pp. 1-9.

Zaman, Gohar and Mahdin, Hairulnizam and Hussain, Khalid and Rahman, Atta-ur- (2020) Information extraction from semi and unstructured data sources: a systematic literature review. ICIC Express Letters, 14 (6). pp. 593-603. ISSN 1881-803X

Zamri, A Z M and N A Awang, N U H H Zalkepali and Mustafa, M K and Mahmud, N N H E N and Muhammad, N A M (2023) Responsiveness of temperature using tunable dual-wavelength Q-switched fiber laser. Laser Phys, 33. pp. 1-5.

Zamri, A Z M and Zalkepali, N U H H and Awang, N A and Mustafa, M K and Mahmud, N N H E N and Muhammad, N A M (2023) Responsiveness of temperature using tunable dual-wavelength Q-switched fiber laser. Laser Phys. pp. 1-5.

Zhi, Qian Phang and Mokhatar, Shahrul Niza and Albshir Budiea, Ahmed Mokhtar (2022) Effects of spent garnet on the compressive and flexural strengths of concrete. Recent Trends in Civil Engineering and Built Environment, 3 (1). pp. 1948-1957.

Zhi Wei Loh, Zhi Wei Loh and Mohd Hafiz Mohd Zaid, Mohd Hafiz Mohd Zaid and Khamirul Amin Matori, Khamirul Amin Matori and Mohd Mustafa Awang Kechik, Mohd Mustafa Awang Kechik and Yap Wing Fen, Yap Wing Fen and Mohd Zul Hilmi Mayzan, Mohd Zul Hilmi Mayzan and Shahira Liza, Shahira Liza and Wei Mun Cheong, Wei Mun Cheong (2023) Phase transformation and mechanical properties of new bioactive glass-ceramics derived from CaO–P2O5–Na2O–B2O3–SiO2 glass system. Journal of the Mechanical Behavior of Biomedical Materials, 143. pp. 1-11.

Zi Yao, Chong and Nor Azli, Mohamad Nor Azhari and Hariri, Azian and Muhamad Damanhuri, Amir Abdullah and Mustafa, Mohd Syafiq Syazwan (2022) Preliminary Study on Student’s Performance and Thermal Comfort in Classroom. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 101 (1). pp. 59-72. ISSN 2289-7879

Zolkifli, Nur Syazlin and Nazari, Ain and Mustafa, Mohd Marzuki and Wan Zakaria, Wan NurShazwani and Suriani, Nor Surayahani and Wan Kairuddin, Wan Nur Hafsha (2020) Retina blood vessel extraction based on Kirsch’s template method. Indonesian Journal of Electrical Engineering and Computer Science, 18 (1). pp. 318-325. ISSN 2502-4752

Zulkifle, Siti Liyana Amalina and Omar, Siti Sarah and Mahadi, Normahaza and Zainal Arifin, Zailin and Yaakop, Azizul Yadi (2021) A review of leadership approaches in the industrial revolution of 4.0 era. Online Journal for TVET Practitioners, 6 (2). pp. 21-27. ISSN 2289-7410

Zulkifli, Ikmal and Mokhatar, Shahrul Niza and Budie, Ahmed Mokhtar Albshir (2022) Performance of spent garnet as sand replacement in concrete at high temperature. Recent Trends in Civil Engineering and Built Environment, 3 (1). pp. 731-738.

Zulkifli, Izyan Fatin Dalila and Fuad, N. and Marwan, M.E. (2020) An Application of Biometric Security Identification for Automated Teller Machine. International Journal of Advanced Computer Systems and Software Engineering, 1 (1). pp. 6-11. ISSN 2716-5256

h Tung, Chih Tung and Ping, Lang Yen and Chao-Yin Tsai1,, Yin Tsai and Pauline Ong, Pauline and Jer-Wei Lin1, Wei Lin and Yung, Huei Chang and Chen, Suming (2022) Nondestructive quantitative analysis of water potential of tomato leaves using online hyperspectral imaging system. Applied Engineering in Agriculture, 38 (2). pp. 273-282.

Book Section

A. Khalifa, Nasradeen (2021) An overview of mini systematic literature on factors that influence the parents "perspective of leaving their children to / from school. In: ROAD PAVEMENT & GEOMATIC APPLICATION: The Scenario. Penerbit UTHM, UTHM, pp. 36-44.

Ab Aziz, Ab Wafi and Jalani, Jamaludin and Mohd Rejab, Sujana and Sadun, Amirul Syafiq (2022) Preliminary findings on EEG controlled prosthetic hand for stroke patients based on motor control. In: Control, Instrumentation and Mechatronics: Theory and Practice. Springer, pp. 1-9.

Ab Razak, Norfarahin and Mustafa, Siti Aisyah and Harun, Amran (2020) Inbound and Outbound Marketing. In: Advance in Marketing Research. Penerbit UTHM, pp. 1-12. ISBN 789672389347

Abd Wahab, Mohd Helmy and Riman, Ahmad Al’ Hafiz and Abdul Kadir, Herdawatie and Sanudin, Rahmat and Johari, Ayob and Mohd Sidek, Roslina and Ahmad, Noraziah (2010) GSM-based notification system for electronic pigeon hole. In: Networked Digital Technologies. Springer, pp. 619-620.

Abd. Jabar, Nur Shahira and Ahad, Rosnee and Mustafa, Mohamad Zaid and Sri Sumarwati, Sri Sumarwati (2021) Pengesan pH air automatik. In: Pembangunan Produk & Reka Bentuk (Product Development & Design). Penerbit UTHM, UTHM, pp. 49-58. ISBN 978-967-2817-45-1

Abdul Kadir, Adibah and Abdul Hamid, Mariam and Md Amin, Noor Dina and Maulad Bahrol, Khadijah and Ismail, Fadillah (2019) Knowledge management models. In: Human Resource Management & Psychology. Penerbit Uthm, Uthm, pp. 25-36. ISBN 978-967-2306-31-3

Abdul Kadir, Adibah and Maulad Bahro, Khadijah and Mohd Rosli, Nur Amalina and Ismail, Fadillah (2019) Women and flexitime. In: Human Resource Management & Psychology. Penerbit Uthm, Uthm, pp. 63-70. ISBN 978-967-2306-31-3

Abdul Kadir, Adibah and Maulad Bahrol, Khadijah and Humaid Alhosani, Adnan Ali Hassan and Ismail, Fadillah (2019) Maternity leave and paternity leave. In: Industrial Relations. Penerbit Uthm, Uthm, pp. 81-88. ISBN 978-967-2306-02-3

Abdul Kadir, Adibah and Salleh, Siti Hasliah and Johar, Sarawati and Mohd Rosli, Nur Amalina and Ismail, Fadillah (2019) Leadership competency. In: Human Resource Management & Psychology. Penerbit Uthm, Uthm, pp. 37-48. ISBN 978-967-2306-31-3

Abdul Kadir, Adibah and Tasmin, Rosmaini and Ismail, Fadillah and Abdul Hamid, Nor Aziati (2019) Under what conditions would a strike be illegal. In: Industrial Relations. Penerbit Uthm, Uthm, pp. 61-68. ISBN 978-967-2306-02-3

Abdul Khalim, Mustapahayuddin and Adzimat, Afiqah Nabilah and Zainol, Nur Zainatul Nadra and Mohammad, Che Adenan (2022) Sorotan perlaksanaan wakaf di Malaysia & manfaatnya kepada pembangunan ummah. In: Penyelidikan Islam: Integrasi Ilmu Naqli dan Aqli. Penerbit UTHM, UTHM, pp. 104-110. ISBN 978-967-2817-72-7

Abdul Sani, Amiril Sahab and Jamaluddin, Nor Athira and Jamaludin, Ahmad Shahir and Talib, Norfazillah (2021) Calophyllum-Inophyllum from Pahang Malaysia as biolubricant feedstock for industrial application. In: Recent Trends in Manufacturing and Materials Towards Industry 4.0. Springer, Springer Singapore, pp. 441-449. ISBN 978-981-15-9505-9

Abdul Wahab, Muhammad Hafiz Mohamad and Abdul Rahim, Ruzairi and Abdul Shaib, Mohd.Fadzli and Ishak, Mohamad Hafis Izran and Mohamed Ali, Mohamed Sultan and Wahid, Herman and Abas, Khairul Hamimah and Jamaluddin, Juliza and Tee, Kian Sek (2022) Tire pressure monitoring system. In: Sensor & Instrumentation System. Penerbit UTHM, UTHM, pp. 105-118. ISBN 978-967-2817-62-8

Abu Hashim, Nur Athirah and Wan Zawawi, Wan Nursyahirah and Othman, Siti Amira and Mohammed, Elizah (2022) The uses of hematopoietic stem cell transplantation to restore the production of blood cells in cancer treatment. In: CHEMICAL PROCESS AND SUSTAINABILITY IN MEDICAL BIOTECHNOLOGY. Penerbit UTHM, UTHM, pp. 103-117.

Abu Zaki, Anis Izura and Ibrahim, Nabilah and Sari, Suhaila and Mahadi, Lina Farhana (2019) Applied of image processing technique on semi-auto count of skin spot. In: Bioengineering Principle and Technology Applications. Penerbit Uthm, Uthm, pp. 51-62. ISBN 978-967-2306-26-9

Ahmad, Noraziah and Mat Zin, Noriyani and Mohd. Sidek, Roslina and Klaib, Mohammad Fadel Jamil and Abd Wahab, Mohd. Helmy (2010) Neighbour replica transaction failure framework in data grid. In: Networked Digital Technologies. Springer, pp. 488-489.

Ahmad, Noraziah and Omardin, M. Affendy and Mohd Zin, Noriyani and Mohd. Sidek, Roslina and Abd Wahab, Mohd Helmy and Ram, Jiwat (2011) BUSCLIS for construction industry. In: Digital Enterprise and Information Systems. Springer, UK, pp. 206-207.

Ahmad, Noraziah and Sidek, Roslina and Klaib, Mohammad F. J. and Che Fauzi, Ainul Azila and Abd Wahab, Mohd Helmy and Wan Mohd, Wan Maseri (2011) Preserving data replication consistency through ROWA-MSTS. In: Software Engineering and Computer Systems. Springer, UK, pp. 244-245.

Ahmad Effendi, Farah Adibah and Harun, Amran and Farradia, Yuary and Abdul Rashid, Umi Kartini and Abu Seman, Noor Aslinda and Hasim, Muhammad Asyraf (2022) Covid-19 and its impact on digital marketing. In: Advance in Marketing Research. Penerbit UTHM, UTHM, pp. 1-11. ISBN 978-967-2817-57-4

Al-Sahari, Mohammed and Al-Gheethi, Adel and Radin Mohamed, Radin Maya Saphira (2020) Natural coagulates for wastewater treatment; a review for application and mechanism. In: Prospects of Fresh Market Wastes Management in Developing Countries. Springer Nature, pp. 1-15. ISBN 978-3-030-42641-5

Amiruddin, Mohd Hasril and Sumarwati, Sri and Mahusin, Nor Asmida (2021) Pembangunan Alat Bahan Bantu Mengajar (ABBM) asas transfomer dalam mesin kimpalan. In: Pembangunan Produk & Reka Bentuk (Product Development & Design). Penerbit UTHM, UTHM, pp. 23-38. ISBN 978-967-2975-67-0

Amri,, Muhammad Akmal and Zainudin, Muhammad Haziq and Razali, Nor Faizah and Mohd Fauzi, Noor Akhmazillah (2022) Milk protein hydrolysates: improved biotechnology from conventional Dairy Milk. In: Chemical Process & Sustainability in Industrial Biotechnology. Penerbit UTHM, UTHM, pp. 15-28.

Ariffin, Arihasnida and Rubani, Siti Nur Kamariah and Hamzah, Norhasyimah and Zakaria, Normah and Subramaniam, Tamil Selvan (2021) Kajian keperluan laman web e-LK berpandukan model Rekabentuk Hannafin Dan Peck. In: Pembangunan Produk & Reka Bentuk (Product Development & Design). Penerbit UTHM, UTHM, pp. 13-23. ISBN 978-967-2817-45-1

Bahar, Nurhidayah and Subaramaniam, Kasthuri and Masoud, Adnan and Shibghatullah, Abdul Samad and Abd Wahab, Mohd Helmy (2022) Investigation on the functional requirements for talent management system – a case of performing arts freelancers in Malaysia. In: Proceedings of the 11th International Conference on Robotics, Vision, Signal Processing and Power Applications. Springer, pp. 963-972.

Bahrin, Muhammad Harith and Abdul Rahim, Ruzairi and Tee, Kian Sek and Abdul Manaf, Mohamad Shukri and Wahap, Ahmad Ridhwan and Mohamed Din, Shahrulnizahani and Ahmad, Nasarudin and Mohd Nayan, Norkharziana and Mohd Zain, Rasif and Pusppanathan, Jaysuman (2022) Smart home security system. In: Sensor & Instrumentation System. Penerbit UTHM, UTHM, pp. 77-88. ISBN 978-967-2817-62-8

Besar, Norashibah (2022) Gagasan negara zikir negara Brunei Darussalam: kejayaan dan cabaran. In: Penyelidikan Islam: Integrasi Ilmu Naqli dan Aqli. Penerbit UTHM, UTHM, pp. 13-28. ISBN 978-967-2817-72-7

Chee Weng, Yap and Jumadi, Nur Anida (2019) Wrist flexion rehabilitation device using arm mbed microcontroller for post-stroke patient. In: Bioengineering Principle and Technology Applications. Penerbit Uthm, Uthm, pp. 87-106. ISBN 978-967-2306-26-9

Chu, Yi Ching and Abu Seman, Noor Aslinda and Harun, Amran (2022) Consumer behavior during the pandemic Covid 19. In: Advance in Marketing Research. Penerbit UTHM, UTHM, pp. 59-73. ISBN 978-967-2817-57-4

Diris, Siti Nur Fazirah and Abdul Rahman, Khairul Anuar and Rahim, Mohd Bekri and Razali, Nizamuddin and Gerijih, Debie Devisser (2021) Alat pengesan paras dan kualiti air sistem menara pendingin berbantukan IoT. In: Pembangunan Produk & Reka Bentuk (Product Development & Design). Penerbit UTHM, UTHM, pp. 78-87. ISBN 978-967-2975-67-0

Dol Ramli, Nur Amira and Abdul Hadi, Muhammad Faris and Mohamed, Elizah and Mohd Fauzi, Noor Akhmazillah (2022) Gene therapy in treating sickle cell anemia disease. In: CHEMICAL PROCESS AND SUSTAINABILITY IN MEDICAL BIOTECHNOLOGY. Penerbit UTHM, UTHM, pp. 13-28.

Dol Ramli, Nur Amira and Abdul Hadi, Muhammad Faris and Mohamed, Elizah and Noor Akhmazillah Mohd Fauzi, Noor Akhmazillah (2022) Gene therapy in treating sickle cell anemia disease. In: CHEMICAL PROCESS AND SUSTAINABILITY IN MEDICAL BIOTECHNOLOGY. Penerbit UTHM, UTHM, pp. 13-28.

Esham, Fahmi Ezzuddin and Zulkiflli, Nur Amira and Thamilvanan,, Mathiventtan and Zulkifle,, Nurul Afiqah and Raihansyah, Mochammad Azriel and Abdullah, Fatin Aliah Phang and Nawi, Nina Diana and Yoong Kang, Adam Wong and Abdullah, Jamel and Tee, Kian Sek and Mohamad, Elmy Johana and Pusppanathan, Jaysuman and Zakaria, Zulkarnay (2022) Inductive mechcharger: mechanical phone charging dock using faraday's law. In: Sensor & Instrumentation System. Penerbit UTHM, UTHM, pp. 119-124. ISBN 978-967-2817-62-8

Ezal’Ain, Ezzah Norizni’Ain and Apin, Jenorico and Mohamed, Elizah and Mohd Fauzi, Noor Akhmazillah (2022) Antioxidants: nanotechnology and biotechnology fusion for medicine in overall. In: CHEMICAL PROCESS AND SUSTAINABILITY IN MEDICAL BIOTECHNOLOGY. Penerbit UTHM, UTHM, pp. 1-12.

Fouzy, Ahmad Shafeeq August and Nawawi, Sophan Wahyudi and Ramli, Muhammad Ruzairi and Leong, Yong Liang and Nian, Noel Ng Fong and Abas, Khairul Hamimah and Abdul Shaib, Mohd. Fadzli (2022) Cross-junction traffic control system via sensor feedback. In: Sensor & Instrumentation System. Penerbit UTHM, UTHM, pp. 89-104. ISBN 978-967-2817-62-8

Hafizal, Rabiatul Adawiyah and Shamsudin, Siti Hajar and Mohamed, Elizah and Mohd Fauzi, Noor Akhmazillah (2022) Production of insulin using recombinant DNA technology. In: CHEMICAL PROCESS AND SUSTAINABILITY IN MEDICAL BIOTECHNOLOGY. Penerbit UTHM, UTHM, pp. 29-44.

Hafizal, Rabiatul Adawiyah and Shamsudin, Siti Hajar and Mohamed, Elizah and Mohd Fauzi, Noor Akhmazillah (2022) Production of insulin using recombinant dna technology. In: CHEMICAL PROCESS AND SUSTAINABILITY IN MEDICAL BIOTECHNOLOGY. Penerbit UTHM, UTHM, pp. 29-44.

Hairol, Nur Nazatul Najwa and Adnan, Nurul Aini and Norhelmi, Siti Aishah and Mohamed, Elizah and Mohd Fauzi, Noor Akhmazillah (2022) Medicinal biotechnology in antibiotics. In: CHEMICAL PROCESS AND SUSTAINABILITY IN MEDICAL BIOTECHNOLOGY. Penerbit UTHM, pp. 45-56.

Hairom, Nur Hanis Hayati and Ismail, Nurul Hana and Abd Hadi, Nurul Aisyah and Abu Bakar Sidik, Dilaelyana and Mohammad, Abdul Wahab (2020) Photocatalytic activity of Zn0-PEG nanoparticles for palm oil mill secondary effluent (POMSE) treatment. In: Green materials and environmental chemistry : New production technologies, unique properties, and applications. Apple Academy Press, pp. 29-46. ISBN 978-1-77188-861-5

Hamir, Mohd. Indra and Rashid, Umi Kartini and Harun, Amran (2022) Covid-19 and its impact on the Malaysian SMEs. In: Advance in Marketing Research. Penerbit UTHM, UTHM, pp. 29-38. ISBN 978-967-2817-57-4

Hashim, Norashuha and Hasim, Muhammad Asyraf and Harun, Amran (2022) Covid-19 and its impacts on consumer decision-making process. In: Advance in Marketing Research. Penerbit UTHM, UTHM, pp. 21-28. ISBN 978-967-2817-57-4

Hasnadi, Mohammad Syahir and Ismail, Muhammad Yusuf and Mohd Fauzi, Noor Akhmazillah (2022) Genetically modified organism. In: CHEMICAL PROCESS AND SUSTAINABILITY IN AGRICULTURAL BIOTECHNOLOGY. Penerbit UTHM, UTHM, pp. 29-38.

Hasrul, Nur Izzati and Rashid, Umi Kartini and Harun, Amran (2022) Covid-19 and marketing strategies. In: Advance in Marketing Research. Penerbit UTHM, UTHM, pp. 74-83. ISBN 978-967-2817-57-4

Hong Xuan, Mars Wai and Ngu, Xavier and Huong, Audrey (2019) The development of a portable optical system for telemonitoring of skin blood oxygen level. In: Bioengineering Principle and Technology Applications. Penerbit Uthm, Uthm, pp. 39-49. ISBN 978-967-2306-26-9

Hui Ling, Chua and Huong, Audrey (2019) Intelligent imaging system for optimal night time driving. In: Bioengineering Principle and Technology Applications. Penerbit Uthm, Uthm, pp. 27-37. ISBN 978-967-2306-26-9

Ibrahim, Sallehuddin and Md Yamin, Mohd Yazid and Md Yunus, Mohd Amri and Abdul Rahim, Ruzairi and Shamsudin, Abu Ubaidah and Ridzuan Aw, Suzanna and Mohd Nayan, Norkharziana and Abdul Manaf, Mohamad Shukri (2022) A lane detection and marking system on unmarked road. In: Sensor & Instrumentation System Series. 28 . Penerbit UTHM, UTHM, pp. 13-22. ISBN 978-967-2817-62-8

Iderus, Nadia Natasha and Mohd Shaha ,, Nurhaslinda and Mohameda, Elizah and Mohd Kassima, Angzzas Sari and Abdul Hamid, Mariani (2022) Bioethanol production from cassava and sugar cane molasses. In: Chemical Process & Sustainability in Industrial Biotechnology. Penerbit UTHM, UTHM, pp. 81-96.

Ishak, Mohamad Hafis Izran and Sahlan, Shafishuhaza and Ullah, Faiza and Md Saleh, Muhammad Qayyim and Abu Bakar, Mohd Hafiez and Ng, Wen Da and Abbas, Nurul Atikah and Ahmad Mukred, Jameel Abdulla and Jamaluddin, Juliza (2022) Eye-see:ai-developed device for the visually impaired. In: Sensor & Instrumentation System. Penerbit UTHM, UTHM, pp. 61-66. ISBN 978-967-2817-62-8

Ismail, Fadillah and Abdul Hamid, Nor Aziati and Abdul Kadir, Adibah and Raja Mohd Rasi, Raja Zuraidah and Alhosani, Adnan Ali Hassan Humaid (2019) Benefits to employers train & hire people with disabilities. In: Industrial Relations. Penerbit Uthm, Uthm, pp. 39-50. ISBN 978-967-2306-02-3 50

Ismail, Fadillah and Abdul Kadir, Adibah and Mohd Rosli, Nur Amalina and Mohd Noor, Norasmiha (2019) Gig economy: the rise of freelancers & its impact on Human Resource (HR). In: Human Resource Management & Psychology. Penerbit Uthm, Uthm, pp. 96-100. ISBN 978-967-2306-31-3

Ismail, Fadillah and Abdul Kadir, Adibah and Salleh, Siti Hasliah (2019) Prioritizing financial and mental wellness. In: Human Resource Management & Psychology. Penerbit Uthm, Uthm, pp. 101-110. ISBN 978-967-2306-31-3

Ismail, Fadillah and Chan, Shiau Wei and Maulad Bahrol, Khadijah and Abdullah, Mohd Fahmy (2019) Employment contract in Malaysia. In: Industrial Relations. Penerbit Uthm, Uthm, pp. 1-12. ISBN 978-967-2306-02-3

Ismail, Fadillah and Humaid Alhosani, Adnan Ali Hassan and Chan, Shiau Wei and Nojumuddin, Nur Syereena (2019) Picket and demonstration in Malaysia. In: Industrial Relations. Penerbit Uthm, Uthm, pp. 89-94. ISBN 978-967-2306-02-3

Ismail, Fadillah and Maulad Bahrol, Khadijah and Abdul Kadir, Adibah (2019) Cause and effect consequences of industrial dispute. In: Industrial Relations. Penerbit Uthm, Uthm, pp. 95-103. ISBN 978-967-2306-02-3

Ismail, Fadillah and Nasuredin, Juzaimi and Humaid Alhosani, Adnan Ali Hassan and Maulad Bahrol, Khadijah and Nojumuddin, Nur Syereena (2019) Statistics of retirement age around the world. In: Industrial Relations. Penerbit Uthm, Uthm, pp. 25-38. ISBN 978-967-2306-02-3

Ismail, Fadillah and Rashid, Umi Kartini and Ahmad, Zanariah and al Hosain, Adnan Ali Hassan and Mohd Rosli, Nur Amalina (2019) Talent management. In: Human Resource Management & Psychology. Penerbit Uthm, Uthm, pp. 11-24. ISBN 978-967-2306-31-3

Ismail, Fadillah and Ruslan, Rumaizah and Abdul Kadir, Adibah and Nasuredin, Juzaimi (2019) Women’s right to breastfeed in workplaces. In: Industrial Relations. Penerbit Uthm, Uthm, pp. 13-24. ISBN 978-967-2306-02-3

Izahudin, Muhammad Haziq and Rosmi, Muhammad Hilman and Mohd Fauzi, Noor Akhmazillah (2022) Neem oil as biopesticides. In: CHEMICAL PROCESS AND SUSTAINABILITY IN MEDICAL BIOTECHNOLOGY. Penerbit UTHM, UTHM, pp. 13-28.

Jais, Noor Maisara and Radin Mohamed, Radin Maya Saphira (2020) Nature versus built. In: Managing the Local Environmental Issues. Penerbit UTHM, pp. 1-13. ISBN 978-967-2389-65-1

Jamaluddin, Nazrul Ikmal and Ahmad, Ida Laila (2019) Sensory nerve conduction system for measurement of nerve velocity across the carpal tunnel. In: Bioengineering Principle and Technology Applications. Penerbit Uthm, Uthm, pp. 63-71. ISBN 978-967-2306-26-9

Johar, Siti Sarawati (2009) Kepentingan penguasaan kecerdasan emosi (EQ) pelajar luar bandar : harapan dan cabaran dalam pembentukan modal insan berjiwa kelas pertama. In: International Conference on Human Capital Development (ICONHCD 2009). -, pp. 1-12.

Kai Len, Tsai and Chee Ming, Chan and A Rahman, Noor Khazanah (2018) Chemical stabilization of clay soil as road base for rural road. In: Construction Materials and Technology Series. Penerbit Uthm, Uthm, pp. 1-16. ISBN 978-967-2183-19-8

Khiflie, Nur Noha Syarafana and Abd Rashid, Nur Amira and Razali, Nor Faizah and Mohd Fauzi, Noor Akhmazillah (2022) Cultured meat from muscle stem cells. In: Chemical Process & Sustainability in Industrial Biotechnology. Penerbit UTHM, UTHM, pp. 1-14. ISBN 978-967-2817-85-7

Khong, F. H. and Rahmat, M. F. and Sunar, N. H. and Ramli, Mimi Faisyalini and Jamaluddin, Juliza and Ahmad, Nasarudin and Nawawi, Sophan Wahyudi and Ibrahim, Sallehudin and Md. Yunos, Yusri (2022) Linear ARX modelling of pneumatic actuator system. In: Sensor & Instrumentation System. Penerbit UTHM, UTHM, pp. 125-143. ISBN 978-967-2817-62-8

Liew Oi Leng, Irene and Toh, Hwee Ting and Mohammed, Elizah and Mohd Fauzi, Noor Akhmazillah (2022) Vaccines for contagious diseases. In: CHEMICAL PROCESS AND SUSTAINABILITY IN MEDICAL BIOTECHNOLOGY. Penerbit UTHM, UTHM, pp. 57-74.

M. Z., Ahmad Fakhrurrazi and W. Q. A., Wan Razali and M. Z., Mahfuzah (2022) Pengaruh zikir terhadap kesihatan mental dan tekanan psikologi dalam mendepani cabaran revolusi industri 4.0. In: Penyelidikan Islam: Integrasi Ilmu Naqli dan Aqli. Penerbit UTHM, UTHM, pp. 1-12.

Mahdin, Hairulnizam and Abawajy, Jemal (2010) An approach to filtering duplicate RFID data streams. In: U- and E-Service, Science and Technology. Springer, pp. 125-133.

Mahir, Mohd Azman and Mohd Fauzi, Mohd Sufi Huzaimi and Mohamed Rehan, Aisyah (2022) Production of natural food-derived vitamin c from orange juice. In: CHEMICAL PROCESS AND SUSTAINABILITY IN MEDICAL BIOTECHNOLOGY. Penerbit UTHM, UTHM, pp. 89-102.

Mahir, Mohd Azman and Mohd Fauzi, Mohd Sufi Huzaimi and Mohamed Rehan, Aisyah and Mohammed, Elizah (2022) Production of natural food-derived vitamin c from orange juice. In: CHEMICAL PROCESS AND SUSTAINABILITY IN MEDICAL BIOTECHNOLOGY. Penerbit UTHM, UTHM, pp. 89-102.

Maulad Bahrol, Khadijah and Humaid Alhosani, Adnan Ali Hassan and Abdullah, Mohd Fahmy and Ismail, Fadillah (2019) Impact retrenchment of workers. In: Industrial Relations. Penerbit Uthm, Uthm, pp. 69-80. ISBN 978-967-2306-02-3

Maulad Bahrol, Khadijah and Md Yusoff, Rosman and Md Amin, Noor Dina and Abdul Hamid, Mariam and Ismail, Fadillah (2019) Model of conflict management. In: Human Resource Management & Psychology. Penerbit Uthm, Uthm, pp. 49-62. ISBN 978-967-2306-31-3

Maulad Bahrol, Khadijah and Raja Mohd Rasi, Raja Zuraidah and Ismail, Fadillah and Tasmin, Rosmaini (2019) Important of prerequisites for successful collective bargaining. In: Industrial Relations. Penerbit Uthm, Uthm, pp. 51-60. ISBN 978-967-2306-02-3

Md Amin, Naqibah Solehah and Mohd Fauzi, Noor Akhmazillah and Mohamed, Elizah (2022) Biotechnology on biopolymer in automotive interiors. In: Chemical Process & Sustainability in Industrial Biotechnology. Penerbit UTHM, UTHM, pp. 29-38.

Md Yusoff, Muhammad Faiz and Jusoh, Nur Aniza Quantaniah and Abu Seman, Noor Aslinda (2022) Consumer satisfaction on the adoption of e-payment among millennials in Malaysia during Covid 19 pandemic. In: Advance in Marketing Research. Penerbit UTHM, UTHM, pp. 84-99. ISBN 978-967-2817-57-4

Mei Ying, Ng and Ibrahim, Nabilah and Fairuz Norsidek, Nur Izza (2019) Measurement of body temperature and heart rate for the development of healthcare system using IOT platform. In: Bioengineering Principle and Technology Applications. Penerbit Uthm, Uthm, pp. 15-25. ISBN 978-967-2306-26-9

Merunei, Nick Cassidy and Chew, Chang Choon (2022) Smart room system with remote access using MQTT. In: Evolution in Electrical and Electronic Engineering. Penerbit UTHM, UTHM, pp. 611-616.

Mohamad Malom, Ahmad Zaki and Awang Kechek, Nurul Nazihah (2022) Perbincangan kajian kebahagiaan dalam Islam dan pengaruhnya di tempat kerja. In: Penyelidikan Islam: Integrasi Ilmu Naqli dan Aqli. Penerbit UTHM, UTHM, pp. 29-38. ISBN 978-967-2817-72-7

Mohamad Taher, Mohammad Nasir and Bujang, Hazirah (2021) Cold mix asphalt- an alternative method to pavement rehabilitation. In: ROAD PAVEMENT & GEOMATIC APPLICATION: The Scenario. Penerbit UTHM, UTHM, pp. 5-7.

Mohamed, Elizah and Adham, Nur Elmira Shafiqah and Mohd Esa, Nur Adilah Fitri and Abd Aziz, Mohd Haiqal (2022) Mutation in plant: key of successful agriculture industry. In: CHEMICAL PROCESS AND SUSTAINABILITY IN AGRICULTURAL BIOTECHNOLOGY. Penerbit UTHM, UTHM, pp. 99-109.

Mohamed, Elizah and Jumadi, Nur Farah Nasuha and Azemi, Nur Asyiqin and Abd Aziz, Mohd Haiqal (2022) Genetically Modified Organisms (GMOs): cultured meat. In: CHEMICAL PROCESS AND SUSTAINABILITY IN AGRICULTURAL BIOTECHNOLOGY. Penerbit UTHM, UTHM, pp. 87-98.

Mohamed, Elizah and Mohd Adnan, Nuraisha Syazwani and Abd Talib, Nur Idayu (2022) Bio-fertilizers application in agricultural biotechnology. In: CHEMICAL PROCESS AND SUSTAINABILITY IN AGRICULTURAL BIOTECHNOLOGY. Penerbit UTHM, UTHM, pp. 51-62.

Mohamed, Elizah and Mustafa, Nur Aqilah Zawani and Sani, Husna Izzati and Abd Aziz, Mohd Haiqal (2022) Performance of engineering plant virus resistance: miRNA gene silencing. In: CHEMICAL PROCESS AND SUSTAINABILITY IN AGRICULTURAL BIOTECHNOLOGY. Penerbit UTHM, UTHM, pp. 39-50.

Mohamed, N. A. N. and Fuad, N. and Marwan, M. E. and Norazlin, Norazlin (2022) EEG pattern for stress condition during listening rock music and binaural beat sound. In: Penyelidikan Islam: Integrasi Ilmu Naqli dan Aqli. Penerbit UTHM, UTHM, pp. 60-85. ISBN 978-967-2817-72-7

Mohamed Zahir, Mohd Akram Zaki and Md Yunos, Yusri and Mazumi, Mazhaniza and Wahap, Ahmad Ridhwan and Wahid, Herman and Ahmad, Anita and Ramli, Mimi Faisyalini and Mohd Zain, Rasif (2022) Smart bus terminal using infrared identification. In: Sensor & Instrumentation System. Penerbit UTHM, UTHM, pp. 41-60. ISBN 978-967-2817-62-8

Mohammad Haidzir, Humaira and Abu Seman, Noor Aslinda and Harun, Amran (2022) Marketing macro environment during the pandemic Covid-19. In: Advance in Marketing Research. Penerbit UTHM, UTHM, pp. 39-47. ISBN 978-967-2817-57-4

Mohammad Khaled, Muhd Nur Danish Ikhwan and Abdul Rahim, Ruzairi and Sahlan, Shafishuhaza and Ahmad, Nasarudin and Mohamad, Elmy Johana and Mohd. Zain, Rasif and Wahid, Herman and Ahmad, Anita (2022) Automatic gate sensors. In: Sensor & Instrumentation System. Penerbit UTHM, UTHM, pp. 67-76. ISBN 978-967-2817-62-8

Mohd Azman, Amier Asyraf and Mohammad Fouad Iskandar,, Haziq Iskandar and Muhammad Zaidi Leong, Muhamad Nur Hafiz Leong and Mohd Fauzi, Noor Akhmazillah (2022) The enhancement of plant disease resistance using CRISPR/Cas9 technology. In: CHEMICAL PROCESS AND SUSTAINABILITY IN AGRICULTURAL BIOTECHNOLOGY. Penerbit UTHM, UTHM, pp. 1-12.

Mohd Fauzi, Noor Akhmazillah and Mohamed, Elizah and Ahmad Soberi, Nurul Aini and Rosli, Nur Farah Aina (2022) Potential of abiotic stress resistance in plants induced by melatonin. In: CHEMICAL PROCESS AND SUSTAINABILITY IN AGRICULTURAL BIOTECHNOLOGY. Penerbit UTHM, UTHM, pp. 63-74.

Mohd Rosli, Nur Amalina and Abdul Kadir, Adibah and Wei, Chan Shiau and Ismail, Fadillah (2019) Impact of technology in human resource. In: Human Resource Management & Psychology. Penerbit Uthm, Uthm, pp. 81-92. ISBN 978-967-2306-31-3

Mohd Rosli, Nur Amalina and Ismail, Fadillah and Rashid, Umi Kartini and Salleh, Siti Hasliah and Kadir, Adibah Abdul (2019) Flexible work. In: Human Resource Management & Psychology. Penerbit Uthm, Uthm, pp. 71-80. ISBN 978-967-2306-31-3

Mohd Salleh, Anuar (2021) Application of UAV in shoreline detection. In: ROAD PAVEMENT & GEOMATIC APPLICATION: The Scenario. Penerbit UTHM, UTHM, pp. 45-48.

Mohd Sidek, Roslina and A., Noraziah and Abd Wahab, Mohd Helmy Bin (2011) The preferable test documentation using IEEE 829. In: Software Engineering and Computer Systems. Springer, UK, pp. 109-118.

Mokhtar, A. S. and Fuad, N. and Marwan, M. E. and Norazlin, Norazlin (2022) Electroencephalogram (EEG) pattern for human smoke habit. In: Penyelidikan Islam: Integrasi Ilmu Naqli dan Aqli. Penerbit UTHM, UTHM, pp. 86-103. ISBN 978-967-2817-72-7

Moorthy, Jaysrini Mahalinga and Sinnathamudhu, Jasshween Godha and Yusuf, Nurul Iman and Mohd Azizi, Muhammad Taufiq Imran and Azmi Nor, Muhammad Danial and Nathan, Shelena Soosay (2021) Mobile computing challenges. In: ICT for Technology Humanization. Penerbit UTHM, UTHM, pp. 10-22. ISBN 978-967-2389-28-6

Nordin, Muhammad Iqbal and Hasim, Muhammad Asyraf and Harun, Amran (2022) How consumers decide to buy during the pandemic Covid-19? In: Advance in Marketing Research. Penerbit UTHM, UTHM, pp. 48-58. ISBN 978-967-2817-57-4

Nordin, Norbaizura and Ahamad Azahari, Ahmad Syakir and Muslim, Maizatul Anis and Kamaruddin, Muhammad Amar (2020) Improvement of the ergonomical structure of Knapsack sprayer to propel cart sprayer (PCS). In: Application in Science and Technology. Penerbit UTHM, pp. 13-20. ISBN 978-967-2389-62-0

Nordin, Norbaizura and Ahamad Azahari, Ahmad Syakir and Muslim, Maizatul Anis and Kamaruddin, Muhammad Amar (2020) Improvement of the total mass and operating time of Knapsack sprayer to Propel Cart Sprayer (PCS). In: Application in Science and Technology. Penerbit UTHM, pp. 21-27. ISBN 978-967-2389-62-0 (In Press)

Nur Afiqah Md Samad,, Nur Afiqah Md Samad, and Nur Hanis Abdul Rahim, Nur Hanis Abdul Rahim and Mariam Firdhaus binti Mad Nordin*, Mariam Firdhaus binti Mad Nordin* and Angzzas Sari binti Mohd Kassim, Angzzas Sari binti Mohd Kassim (2022) RNA Interference (RNAi) for plants. In: CHEMICAL PROCESS AND SUSTAINABILITY IN AGRICULTURAL BIOTECHNOLOGY. Penerbit UTHM, UTHM, pp. 75-86.

Nur Suhaila, Nur Suhaila and Huong, Audrey (2019) Diabetic foot plantar pressure monitoring system using force sensitive resistor system. In: Bioengineering Principle and Technology Applications. Penerbit Uthm, Uthm, pp. 73-85. ISBN 978-967-2306-26-9

Oi Leng, Irene Liew and Toh, Hwee Ting and Mohammed, Elizah and Mohd Fauzi, Noor Akhmazillah (2022) Vaccines for contagious diseases. In: CHEMICAL PROCESS AND SUSTAINABILITY IN MEDICAL BIOTECHNOLOGY. Penerbit UTHM, pp. 57-74.

Othman, Ahmad Akmal Hilmi and Puteh, Saifullizam and Buhari, Rosnawati (2021) Sistem pemantauan pengairan dan saliran sawah padi menggunakan teknologi komunikasi mudah alih. In: Pembangunan Produk & Reka Bentuk (Product Development & Design). Penerbit UTHM, UTHM, pp. 53-67. ISBN 978-967-2975-67-0

Palpanadan, Sarala @ Thulasi and Ahmad, Iqbal and Isa, Khairunesa and K.Ravana, Venosha (2020) Pedagogical Implications of Service-Learning Integration in Engineering Education. In: International Journal of Recent Technology and Engineering (IJRTE). Blue Eyes Intelligence Engineering & Sciences Publication, pp. 349-357. ISBN 2277-3878

Paramasivam, Revathi and Murugananthan, Yuggheshinie and Mohammed, Elizah and Mohd Fauzi, Noor Akhmazillah (2022) Development of human growth hormones. In: CHEMICAL PROCESS AND SUSTAINABILITY IN MEDICAL BIOTECHNOLOGY. Penerbit UTHM, UTHM, pp. 75-88.

Punai Philimon, Sheena and Huong Kah Ching, Audrey and Ngu, Xavier (2019) Optical measurement of tissue perfusion in diabetic wound patients. In: Bioengineering Principle and Technology Applications. Penerbit Uthm, Uthm, pp. 1-14. ISBN 978-967-2306-26-9

Rahim, A. A. A. and Fuad, N. and Marwan, M. E. and Norazlin, Norazlin (2022) EEG pattern of human calmness during listening to Al-Quran recitation and soft instrumental music. In: Penyelidikan Islam: Integrasi Ilmu Naqli dan Aqli. Penerbit UTHM, UTHM, pp. 39-59. ISBN 978-967-2817-72-7

Ramli, Yahaya and Othman, Norazila and Yahaya, Nurulain and Mohamad, Mahmod Abd. Hakim (2022) Klasifikasi sumber bahan buangan. In: Teknologi Penggasan Terkini : Teori dan Uji Kaji. UTM Press, UTM, pp. 23-25.

Salah Uddin, Salah Uddin and Mohamad, Mahathir and Kamardan, M Ghazali and Sufahani, Suliadi Firdaus (2018) Fractional derivative on MHD flow of the third grade fluid in the porous tube subjected to a constant body acceleration and pressure gradient. In: A Letter on Applications of Mathematics and Statistics. Penerbit UTHM, pp. 119-127. ISBN 978-967-2216-06-3

Seron, Nor Fasihah Ngah and Hanapi, Nor Amalina and Wan Ismail, W. H. (2021) Urban connectivity in Johor Bahru City Center: a review study. In: Architecture and Technology in Malaysia. Penerbit UTHM, UTHM, pp. 41-53. ISBN 978-967-2817-14-7 (Submitted)

Shaari Majed, Muhammad Amer Daneal and Abdullah, Dzul Izlee and Mohamed, Elizah and Abd Aziz, Mohd Haiqal (2022) Bio-based enzymes as source of chemicals and materials in industrial biotechnology. In: Chemical Process & Sustainability in Industrial Biotechnology. Penerbit UTHM, UTHM, pp. 67-80.

Soon Ern, Peniel Ang and Mei Ling, Lim (2018) Study on thermal performance of Precast Concrete Sandwich Panel (PCSP) design for sustainable built environment. In: Construction Materials and Technology Series. Penerbit Uthm, Uthm, pp. 31-48. ISBN 978-967-2183-19-8

Suarin, Nur Aisyah Syafinaz and Kim, Seng Chia (2022) Transferring near infrared spectroscopic calibration model across different harvested seasons using joint distribution adaptation. In: Control, Instrumentation and Mechatronics: Theory and Practice. Springer, pp. 707-716.

Subhi, Nasrudin and Ibrahim, Rozita and Mohamad, Mohd Suhaimi and Mohti, Azmah (2022) Kesejahteraan dan peminggiran Orang Asli Jakun Tasik Chini dalam menuju pembangunan lestari. In: Penyisihan Sosial Kumpulan Marginal. UUM Press, UUM, pp. 89-106.

Suhandri, Hendy Fitrian and Adil, Irdam and A. Khalifa, Nasradeen and Saptari, Asep Yusup (2021) Time scales and their characteristics. In: ROAD PAVEMENT & GEOMATIC APPLICATION: The Scenario. Penerbit UTHM, UTHM, pp. 49-62.

Tajurahim, Nurul Ainina Nadhirah and Mahmood, Salwa and Marsi, Noraini and Raja Mamat, Tengku Nur Azila (2021) Improvement of facilities layout planning related with safety: a case study at quarry. In: Multidisciplinary Engineering Science and Advanced Technology. Penerbit UTHM, UTHM.

Talib, N. and M. Nasir, R. and A. Rahim, E. and Lee, W. K. and Abdullah, H. and Saleh, A. (2021) Tribological evaluation of solid lubricant enriched in modified Jatropha-Based Oil as Minimum Quantity Lubrication (MQL) oil for composite material. In: Tribological Applications of Composite Materials. Springer, pp. 331-345. ISBN 978-981-15-9634-6

Tuan Ismail, Tuan Noor Hasanah and Wijeyesekera, Devapriya Chitra and Mohd Yusoff, Aima Nadia and Lim Meng Siang, Alvin John (2018) Improvement of soft soil stiffness using geo-composite cellular mat. In: Construction Materials and Technology Series. Penerbit Uthm, Uthm, pp. 17-30. ISBN 978-967-2183-19-8

Ullah, Israr and Ullah, Rahmat and Amin, Muhammad and Abd Rahman, Rahisham and Khan, Aftab and Ullah, Nasim and Alotaibi, Sattam (2022) Lifetime estimation and orientation effect based on long-term degradation analysis of thermoset and thermoplastic insulators. In: Polymers. MDPI, pp. 1-16.

Wahid, Herman and Omar, Azmi and Ismail, Mohd Fauzi and Ahmad, Nasarudin and Sahlan, Shafishuhaza and Mohamad, Elmy Johana and Abdul Wahab, Yasmin (2022) PLC design for automatic power transfer of 11kv switchgear. In: Sensor & Instrumentation System. Penerbit UTHM, UTHM, pp. 23-40. ISBN 978-967-2817-62-8

Wan Ismail, Wan Mohd Akmal Hakimi and Rudi, Muhamad Azri and Mohamed, Elizah (2022) The use of microorganisms in dairy products (butter). In: Chemical Process & Sustainability in Industrial Biotechnology. Penerbit UTHM, UTHM, pp. 51-66.

Wan Kairuddin, Wan Nur Hafsh and Wan Mahmud, Wan Mahani Hafizah and Nazari, Ain (2019) Speckle filtering techniques for different quality level of healthy kidney ultrasound images. In: Bioengineering Principle and Technology Applications. Penerbit Uthm, Uthm, pp. 107-122. ISBN 978-967-2306-26-9

Yang Lim, Xiang and Gaik Tay, Kim and Huong, Audrey (2019) Breast tumor diagnosis in digital mammograms. In: Bioengineering Principle and Technology Applications. Penerbit Uthm, Uthm, pp. 123-137. ISBN 978-967-2306-26-9

Yuary Farradia, Yuary Farradia and Harun, Amran (2022) Covid-19 and ecotourism prospect: Malaysia and Indonesia perspectives. In: Advance in Marketing Research. Penerbit UTHM, UTHM, pp. 12-20. ISBN 978-967-2817-57-4

Zainol, Nur Zainatul Nadra and Siti Marpuah, Siti Marpuah and Fuad, N. and Abdul Khalim, Mustapahayuddin and Mohammad, Che Adenan (2022) Menyusuri khazanah warisan budaya: Kuda Kepang antara kesenian dan kepatuhan syariah. In: Penyelidikan Islam: Integrasi Ilmu Naqli dan Aqli. Penerbit UTHM, UTHM, pp. 111-116. ISBN 978-967-2817-72-7

Conference or Workshop Item

A. Majid, Masni and Ahmad Tajudin, Rasyidah and Salleh, Norhafizah and Abd. Hamid, Noor Azlina (2017) Passive wall cooling panel with phase change material as a cooling agent. In: GCoMSE2017, 28 Ogos2017, Johor Bahru.

A. Rahman, K. A. and Ibrahim, B. S. K. K (2012) Fundamental study on brain signal for BCI-FES System Development. In: 2012 IEEE EMBS International Conference on Biomedical Engineering and Sciences, 17th - 19th December 2012, Langkawi.

A. Rahman, K. A. and Ibrahim, B. S. K. K. and Leman, A. M. and A. Jamil, M. M. (2012) Fundamental study on brain signal for bci-fes system development. In: 2012 IEEE EMBS International Conference on Biomedical Engineering and Sciences, 17th - 19th December 2012, Langkawi.

Ab Zail, Nurul Fazilah and Adnan, Suraya Hani (2021) Sustainable concrete partially comprised of supplementary cementitious material and alternative fine aggregate- a review. In: Progress in Engineering Application and Technology, 22 Jun 2021, UTHM.

Abd Rahman, Rahisham and Haddad, A. and Harid, Noureddine (2011) Performance of nonlinear grading coating on polymeric outdoor insulators under lightning impulse voltages. In: 21st International Conference on Electricity Distribution, 6-9 June 2011, Frankfurt.

Abdol Rahman, Mohd Nasrull and Samin, Nor Laila Hanum (2022) Risk assessment of Occupational Safety & Heath (OSH) hazards at small and medium enterprise (SME). In: Research Progress in Mechanical and Manufacturing Engineering.

Abdul Kadir, Aeslina and Mohajerani, Abbas (2013) Physical and mechanical properties of fired clay bricks incorporated with cigarette butts: comparison between slow and fast heating rates. In: Applied Mechanics and Materials, 2013.

Abdul Latip, Arisya and Ali, Noorwirdawati and Abdul Hamid, Noor Azlina and Salleh, Norhafizah and Abdullah, Siti Radziah and Shahidan, Shahiron (2020) Performance of modified mortar containing epoxy. In: The 2nd Global Congress on Construction, Material and Structural Engineering, 26th to 27th of August 2019, Melaka, Malaysia..

Abdul Rahim, Nur Fazira and Muhammad, Norhayati and Abdullah, Norazlin and A. Talip, Balkis and Dusuki, Nur Jihan Shahirah (2018) Polyherbal formulations with optimum antioxidant properties. In: Preface: The 3rd International Conference on Applied Science and Technology (ICAST’18), 10-12 April 2018, Penang.

Abdul Rahman, Aqilah Awg and Mohamed, Maryati and Linatoc, Alona Cuevas (2018) Butterfly (lepidoptera: rhophalocera) diversity in Bukit Soga, the green lung of Batu Pahat, Malaysia. In: 5th International Conference on Biological Science, July 22nd to 25th, 2019, Macao Science Center.

Abdul Rahman, Ismail and Azis, Noorul Azreen and Mahmood, Salwa and Mohd Rohani, Jafri and Zaidi, Nor Amira Farhana and Mohd Sukri, Suhaimi and Mohd Zain, Mohd Arif Afzan (2022) Development of a survey instrument for measuring workers satisfaction on usability of manual handling equipments at the warehouse: a pilot study. In: Human-Centered Technology for a Better Tomorrow, 22 FEBRUARY 2021, KL.

Abdullah, N. and Jamiluddin, J. and Hagos, F. Y. and Azmi, N. S. N. (2020) Experimental investigation on pineapple leaf fiber as biomass source for renewable energy application. In: ICMER 2019, Jul 30, 2019 - Jul 31, 2019, Kuantan, Pahang, Malaysia.

Abdullah, Siti Nurelida and Mohd Safuan, Hamizah and Nor, Maria Elena and Jamaian, Siti Suhana and Aman, Fazlina and Md Shab, Noorzehan Fazahiyah (2018) Harvesting effects on population model of competitive interaction with shared biotic resource. In: PROCEEDING OF THE 25TH NATIONAL SYMPOSIUM ON MATHEMATICAL SCIENCES (SKSM25): Mathematical Sciences as the Core of Intellectual Excellence, 25 – 27 September 2017.

Abid, Abid and Sulaiman, Noralfishah and Mahmud, Nur Putri Najwa and Nazir, Umber and Adnan, Nur Azhani (2020) A review on the application of remote sensing and geographic information system in flood crisis management. In: 4th ASIA International Multidisciplinary Conference-AIMC-2020, Apr 17, 2020 – Apr 19, 2020, UTM, Johor Malaysia.

Abu Bakar, Nurul Fathihah and Othman, Siti Amira Review on bio-based plastic for future applications. In: -, -, -.

Abu Bakar, Nurul Fathihah and Othman, Siti Amira and Nor Azman, Nor Farah Amirah and Jasrin, Nurin Saqinah (2018) Effect of ionizing radiation towards human health: a review. In: International Conference on Sustainable Energy and Green Technology, 2018 11–14 December 2018, Kuala Lumpur, Malaysia.

Adnan1, S H and Kamarulzaman, N A and Mohd Sari, K A and Osman, M H and Jamellodin, Z and Abdul Hamid, N A and Alisibramulisi, A and Abdul Roni, N and Mohd Yassin, N I and Wahee Anuar, M N A (2020) Sound absorption of lightweight brick containing expanded polystyrene beads and palm oil fuel ash. In: 2nd International Conference on Civil & Environmental Engineering, 20th - 21st November 2019, Langkawi, Kedah, Malaysia.

Adon, Mohamad Nazib and Dalimin, M. Noh and Abdul Jamil, Muhammad Mahadi and Mohd Kassim, Norazan (2012) Development of high voltage pulse inducement method for biological cell. In: 2012 International Conference on Biomedical Engineering (ICoBE),, 27-28 February 2012, Penang.

Adon, Mohamad Nazib and Dalimin, M. Noh and Abdul Jamill, Muhammad Mahadi and Mohd Kassim, Norazan and Hamdan, Sallehhuddin (2012) Study of effect of microsecond pulsed electric fields on threshold area of HeLa Cells. In: 2012 IEEE EMBS International Conference on Biomedical Engineering and Sciences, 17th - 19th December 2012, Langkawi.

Ahmad, M. K. I. and Ibrahim, B. S. K. K. and Rahman, K. A. A. and Masdar, A. and Nasir, N. H. M. and Abdul Jamil, M. Mahadi (2012) Knee JointImpedanceHybrid Modeling and Control of Functional Electrical Stimulation (FES)-Cyclingfor Paraplegic: Free Swinging trajectory. In: 2012 IEEE EMBS International Conference on Biomedical Engineering and Sciences, 7th - 19th December 2012, Langkawi.

Ahmad, M. K. I. and Ibrahim, B. S. K. K. and Rahman, K. A. A. and Masdar, A. and Nasir, N. H. M. and Abdul Jamil, Mahadi (2012) Knee joint impedance hybrid modeling and control of Functional Electrical Stimulation (FES)-cyclingfor paraplegic: free swinging trajectory. In: 2012 IEEE EMBS International Conference on Biomedical Engineering and Sciences, 17th - 19th December 2012, Langkawi.

Ahmad, Nurazwa and Othman, Siti Norezam and Mad Lazim, Halim (2012) A review of technological capability in Malaysian manufacturing sector. In: Proceedings International Conference of Technology Management, Business and Entrepreneurship 2012 (ICTMBE2012),, 18-19 Dec 2012, Renaissance Hotel, Melaka, Malaysia.

Aidil, Siti Balqish and Masek, Alias (2022) IoT-based occupancy display system in office. In: Research and Innovation in Technical and Vocational Education and Training, UTHM.

Alduais, N.A.M. and Abdullah, Noryusliza and Abdullah, J and Jamil, A and H. Y. Saad, Abdul-Malik Implementation and analysis of an updating data strategy on iot-waspmote gases testbed with 2.4 ghz xbee for air quality application. In: 2020 IEEE 10th Symposium on Computer Applications & Industrial Electronics (ISCAIE), 18-19 April 2020, Malaysia.

Ali, Azita and Pat, Siew Chien (2022) Development of 3D animated video application for computer evolution. In: Research and Innovation in Technical and Vocational Education and Training, UTHM.

Ali, Maselan and Sufahani, Suliadi Firdaus and Hasim, Nurnazifa and Rusiman, Mohd Saifullah and Roslan, Rozaini and Mohamad, Mahathir and Khalid, Kamil (2018) The development of proofs in analytical mathematics for undergraduate students. In: ISMAP 2017, 10-12 April 2018, Penang.

Aman, Fazlina and Ishak, Anuar and Abdullah Sani, Nur Liyana Aini and Mohd Safuan, Hamizah and Md Shab, Noorzehan Fazahiyah and Jamaian, Siti Suhana and Nor, Maria Elena (2018) Hydromagnetic flow and heat transfer adjacent to an unsteady stretching vertical sheet with prescribed surface heat flux. In: -, -, -.

Ang, P S E and Pung, Y L and Tsai, K L and Zulkaply, M NA and Tey, J S and Kasim, N B and Osman, M H and Musa, M K and Abdul Rahman, M A (2020) Bim: the setback or solution to project cost issues in Malaysia construction industry? In: 2nd International Conference on Civil & Environmental Engineering.

Anuar, N. F. and M. Jamail, N. A. and A. Rahman, R. and Kamarudin, M. S. (2012) Breakdown characteristic analysis of paper- oil insulation under AC and DC voltage. In: International Research and Innovation Summit (IRIS2017), 6–7 May 2017, Melaka, Malaysia.

Anuar, N. F. and M. Jamail, N. A. and Rahman, R. and Kamarudin, M. S. (2017) Breakdown characteristic analysis of paper- oil insulation under AC and DC voltage. In: International Research and Innovation Summit (IRIS2017), 6–7 May 2017, Melaka, Malaysia.

Asmara, Y. P. and Ismail, M. F. and L., Giok Chui and Halimi, Jamiludin (2016) Predicting effects of corrosion erosion of high strength steel pipelines elbow on CO2-Acetic Acid (HAc) solution. In: iMEC-APCOMS 2015, UMP.

Asmara, Y. P. and Juliawati, A. and Sulaiman, A. H. and Jamiluddin, Jamiluddin (2013) Mechanistic model of stress corrosion cracking (scc) of carbon steel in acidic solution with the presence of H2s. In: 2nd International Conference on Mechanical Engineering Research (ICMER 2013), 1st to 3rd July 2013, Kuantan, Pahang, Malaysia.

Asmuin, Norzelawati and Pairan, M. Rasidi and Mat Isa, Norasikin and Sies, Farid (2022) Study the velocity and pressure exerted in front of the filter surface in the kitchen hood system by using ANSYS. In: 7th International Conference on Mechanical and Manufacturing Engineering.

Asyikin Yusop, Umira and Kang Huai, Tan and Abd.Rahman, Hamimah and Baharuddin, Nurul Akidah and Raharjo, Jarot (2020) Electrochemical performance of barium strontium cobalt ferrite - samarium doped ceria - argentum for low temperature solid oxide fuel cell. In: Materials Science Forum.

Awang, Noor Azura and Aziz, Nor Syuhada and Azmi, Atiqah Nabieha and Hadi, Fatin Shaqira and Zakaria, Zahariah (2018) Experimental and numerical comparison q-switched fiber laser generation using graphene as saturable absorber. In: MUCET 2017, 6-7 Disember 2017, UMP.

Awang-Kanak, Fadzilah and Abu Bakar, Mohd Fadzelly and Mohamed, Maryati (2017) Ethnobotanical survey on plants used as traditional salad food (ulam) in Kampung Taun Gusi, Kota Belud Sabah, Malaysia. In: International Conference on Biological Science, September 2017.

Awang-Kanak, Fadzilah and Abu Bakar, Mohd Fadzelly and Mohamed, Maryati and Norazlimi, Nor Atiqah (2018) Utilization of natural resources: Preliminary study on ethnopharmacological application of ‘ulam’ or traditional vegetables among Sama-Bajau of Kampung Menunggui, Kota Belud, Sabah. In: PROCEEDINGS OF THE 3RD INTERNATIONAL CONFERENCE ON APPLIED SCIENCE AND TECHNOLOGY (ICAST’18), 10-12 April 2018, Penang.

Azhar, A. T. S. and Nordin, N. S. and Azmi, M. A. M. and Embong, Z. and Sunar, N.M. and Hazreek, Z. A. M. and Aziman, M. (2018) The physical behavior of stabilised soft clay by electrokinetic stabilisation technology. In: ISMAP 2017, October 28, 2017, Batu Pahat, Johor.

Azli, Siti Nur Shafiqah and Abu Bakar, Mohd Fadzelly and Sanusi, Shuaibu Babaji and Awang-Kanak, Fadzilah (2018) Nutritional, phytochemical, antioxidant activity and sensory attributes of herbal infusion from sukun (Artocarpus altilis) leaf. In: The 3rd International Conference on Applied Science and Technology (ICAST’18), 10-12 April 2018, Penang.

B. Odili, Julius and B. Nasser, Abdullah and A., Noraziah and Abd Wahab, Mohd Helmy and Ahmed, Mashuk (2022) African buffalo optimization algorithm based t-way test suite generation strategy for electronic-payment transactions. In: ICETIS 2021, June 25-26, 2021, Onine.

C. Chan, Teck Loon and J., Kavikumar and D., Nagarajan and V., Yuvaraj (2020) A comprehensive study of personalized garment design using fuzzy logic. In: AIP Conference Proceedings 2282, 20 October 2020.

Che Ahmed, Normaisarah and Choy, Yaan Yee and Tay, Kim Gaik (2018) Nonlinear wave modulation in thin viscoelastic tube filled with inviscid fluid. In: AIP Conference Proceedings.

Che Din, Nazli and Mistar, Noor Aini and Sulaiman, Raha and Abdullah, Zunaibi and Yahya, Musli Nizam and Haron, Zaiton (2022) Conceptual framework on noise ranking classification in eatery places for human psycho-acoustics preferences towards acoustic comfort. In: ICONBUILD & RCCE 2019, 20 – 22 AUGUST 2019, ADYA HOTEL, LANGKAWI, MALAYSIA.

Che-Him, Norziha and Kamardan, M. Ghazali and Rusiman, Mohd Saifullah and Sufahani, Suliadi Firdaus and Mohamad, Mahathir and Kamaruddin, Nafisah @ Kamariah (2017) Spatio-temporal modelling of dengue fever incidence in Malaysia. In: ISMAP 2017, October 28, 2017, Batu Pahat, Johor.

Danlami, Muktar and Jamel, Sapiee and Ramli, Sofia Najwa and Megat Azahari, Siti Radhiah (2020) Comparing the legendre wavelet filter and the gabor wavelet filter for feature extraction based on iris recognition system. In: 2020 IEEE 6th International Conference on Optimization and Applications (ICOA), 20-21 April 2020, Beni Mellal, Morocco.

E. L., Sin Jian and Daud, Rosdi and H. M., Ayu and Yusoff, M. H. and Jamiluddin, J. and Shah, A. (2019) Application of a finite element method to predict fatigue life of the knee mobile bearing. In: 1st International Postgraduate Conference on Mechanical Engineering (IPCME2018), 31 October 2018, Pahang, Malaysia.

Fazlina, M. I. S. and Azhar, A. T. S. and Abdullah, M. E. and Sunar, N. M. and Embong, Z. and Aziman, M. (2018) Effect of rainfall patterns on concentration of CO2, soil temperature and matric suction for acidic barren soil. In: International PostGraduate Conference on Applied Science & Physics 2017, 7 December 2017, Johor, Malaysia.

Gopalakrishnan, Jaya Bharath and Sabapathy, Thennarasan and Jusoh, Muzammil and Al-Bawri, Samir and Yaasin, M.N. and Osman, Mohamed Nasrun and Abd Rahim, Hasliza and Mat, Mohd Hafizudin and A. Majid, Huda and Ali, Tarmizi and Abdul Wahab, Yasmin (2019) Radiation pattern reconfigurable fm antenna. In: International Conference Computer Science and Engineering, 26 - 28 JUNE 2019, MIRI, SARAWAK.

Haddad, Meryana Zuhair and Yee, Mei Heong and Abdul Razzaq, Abdul Rasid and Tee, Tze Kiong (2021) Exploring the innovative methods for evaluating educational efficiency. In: 2021 International Conference on Decision Aid Sciences and Application (DASA), 7th – 8th December 2021, Online.

Hamdan, M. H. M. and Siregar, J. P. and Bachtiar, D. and Rejab, M. R. M. (2017) Effect of alkaline treatment on mechanical properties of woven ramie reinforced thermoset composite. In: 4th International Conference on Mechanical Engineering Research (ICMER2017), 1–2 August 2017, Swiss Garden Beach Resort, Kuantan, Pahang, Malaysia.

Hanafi, Dirman (2010) PID controller design for semi-active car suspension based on model from intelligent system identification. In: 2010 Second International Conference on Computer Engineering and Applications, Bali Island, March 19 2010 to March 21 2010.

Hanapi, Nur Amalina and Idris Shazali, M. Azzamudeen and Abd Wahab, Izudinshah and Ahmad Mahmud, Nasrul Arif The study of fire safety for multi-storey container hotel: a case study in Muar PPT hotel. In: 5th International Conference on Civil and Environmental Engineering for Sustainability (IConCEES 2019), 19 - 20 December 2019, Le Grandeur Palm Resort, Johor Malaysia.

Ho Chee Leong, Richmond Chris and Zulkipli, Muhammad and Shaari, Muhammad Farid (2021) Design of a low cost coin acceptor for vending machine. In: Progress in Engineering Application and Technology, 22 Jun 2021, UTHM.

Ibrahim, Rosziati and Muhammed Asri, Noor Athirah and Jamel, Sapiee (2019) The architecture of smart city in Malaysia by utilizing IOTs. In: 2019 IEEE 9th Conference on System Engineering and Technology (ICSET2019), 7th October 2019., Grand Blue Wave Hotel, Shah Alam, Malaysia.

Idris, Mohd Yaman and Ahmad, Hajar Fauzan and Hashim, Ridzwan and Usup, Gires and Mohamed Rehan, Aisyah and Kamarudin, Kamarul Rahim (2010) Phylogeny of holothuria leucospilota (echinoderma : holothuroidea) as inferred from cytochrome c oxidase i gene sequences. In: Borneo Journal of Resource Science and Technology, 2010, UMS.

Ismail, Norradihah and Mohamed, Maryati and Phon, Chooi Khim and Tokiman, Lili (2018) Spatial distribution of butterfly (lepidoptera: papilionoidea) along altitudinal gradients at Gunung Ledang National Park, Johor, Malaysia. In: -, -, -.

Izaan, I Hadi and Hani, A. Suraya and A. W., Norhayati and O., Mohamad Hairi and J., Zalipah and A. H., Noor Azlina and S., Norhafizah and Mia Wimala, Mia Wimala (2022) Preliminary study of sago fine waste as a sand replacement material for cement brick. In: ICONCEES-2021, 15 & 16 November 2021, Virtual conference.

Jaafar, M. and Othman, M. and Yaacob, M. and Haroon, H. and Ilyas, M. A. and Ayub, A. A. (2020) Excitation of surface plasmons in thin noble metallic film of copper, silver and gold paper. In: 2020 IEEE Student Conference on Research and Development (SCOReD), 27-28 September 2020, Johor, Malaysia.

Jamaii, N. A. M. and Piah, M. A. M. and Muhamad, N. A. (2011) Comparative study on conductivity using Polarization and Depolarization Current (PDC) test for HV Insulation. In: 2011 International Conference on Electrical Engineering and Informatics, 17-19 July 2011, Bandung, Indonesia.

Jamian, J. J. and Mustafa, M. W. and Mokhlis, H. and Abdullah, M. N. (2012) Comparative study on distributed generator sizing using three types of particle swarm optimization. In: 2012 Third International Conference on Intelligent Systems Modelling and Simulation, 8-10 Feb. 2012.

Jamian, J. J. and Mustafa, M.W. and Mokhlis, H. and Abdullah, M. N. (2012) Comparative study on distributed generator sizing using three types of particle swarm optimization. In: 2012 Third International Conference on Intelligent Systems Modelling and Simulation, 8-10 Feb. 2012.

Jamil, Dzuliana Fatin and Roslan, Rozaini and Abdulhameed, Mohammed and Che-Him, Norziha and Sufahani, Suliadi Firdaus and Mohamad, Mahathir and Kamardan, Muhamad Ghazali (2018) Unsteady blood flow with nanoparticles through stenosed arteries in the presence of periodic body acceleration. In: ISMAP 2017, October 28, 2017, Batu Pahat, Johor.

Jasrin, Nurin Saqinah and Othman, Siti Amira and Nor Azman, Nor Farah Amirah and Abu Bakar, Nurul Fathihah Prediction of severe accident occurrence in radiation laboratory using fault tree method. In: -, -, Batu Pahat, Johor.

Johari, Ahmad Amni and Abd Wahab, Mohd Helmy and Mustapha, Aida (2019) Two-class classification: comparative experiments for chronic kidney disease. In: 2019 4th International Conference on Information Systems and Computer Networks (ISCON), 21-22 Nov. 2019, Mathura, India.

Junaidi, Amirul Asyraf and Mahyeddin, Mohd Eizzuddin and Abdul Rahman, Mohammad Ashraf (2021) A study comparison of different aggregate between concrete mixture with processed recycled waste and conventional concrete mixture with gravel. In: Progress in Engineering Application and Technology, 22 Jun 2021, UTHM.

Kabir Aliyu, Mohammed and Abd. Karim, Ahmad Tarmizi and Ming Chan, Chee and Nda, Muhammad In situ remediation of lead contaminated marine sediment using bentonite, kaolin and sand as capping materials. In: 5th International Conference on Civil and Environmental Engineering for Sustainability (IConCEES 2019), 19 - 20 December 2019, Le Grandeur Palm Resort, Johor Malaysia.

Kamardan, M. Ghazali and Aminudin, N. and Che-Him, Norziha and Sufahani, Suliadi and Khalid, Kamil and Roslan, Rozaini (2018) Modified multi prime RSA cryptosystem. In: ISMAP 2107, October 28, 2017, Batu Pahat, Johor.

Kamaruddin, Akmalia Shahira and Katimon, Mohd Nizam (2022) Simulation study on the material stress distribution respect to different angle of ECAP. In: Research Progress in Mechanical and Manufacturing Engineering.

Kamarudin, M. S. and Albano, M. and Coventry, P. and Harid, N. and Haddad, A. (2011) A Survey on the Potential of CF3I Gas as an Alternative for SF6. In: Fourth UHVnet Colloquium, January 18th – 19th 2011, Fourth UHVnet Colloquium.

Karim, Mohd F. and Mohamad, Mahathir and Rusiman, Mohd Saifullah and Che-Him, Norziha and Roslan, Rozaini and Khalid, Kamil (2018) ADM for solving linear second-order fredholm integro- differential equation. In: ISMAP 2017, October 28, 2017, Batu Pahat, Johor.

Kopsidas, K. and Rowland, S. M. and R. Baharom, M. N. and Cotton, I. (2010) Power transfer capacity improvements of existing overhead line systems. In: International Symposium on Electrical Insulation, 6-9 June 2010, USA.

Kormin, Shaharuddin and Kormin, Faridah and Hossen Beg, Mohammad Dalour (2018) Study of natural weathering exposure on properties of ldpe incorporated with sago starch. In: -, -, -.

Latif, Muhammad Sohail and Kormin, Faridah and Mustafa, Muhammad Kamarulzaki and Mohamad, Ida Idayu and Khan, Muhammad and Abbas, Sameera and Ghazali, Muhammad Ihsan and Shafie, Nor Shafawati and Abu Bakar, Mohd Fadzelly and Sabran, Siti Fatimah and Mohamad Fuzi, Siti Fatimah Zaharah (2018) Effect of temperature on the synthesis of centella asiatica flavonoids extract-mediated gold nanoparticles: uv-visible spectra analyses. In: ICAST’18, 10-12 April 2018, Penang.

Liwauddin, Muhammad Lut and Ayob, Mohammad Afif and Rohaziat, Nurasyeera (2022) Continuous data collection of under extrusion in FDM 3D printers for deep-learning dataset. In: IEEE 5th International Symposium in Robotics and Manufacturing Automation, 6-8 August 2022, Malacca.

Liwauddin, Muhammad Lut and Shamsudin, Abu Ubaidah and Ayob, Mohammad Afif and Rohaziat, Nurasyeera and Zakaria, Mohamad Fauzi (2022) Development of a dodecacopter using Pixhawk 2.4.8 autopilot flight controller. In: IEEE 5th International Symposium in Robotics and Manufacturing Automation,, 6-8 August 2022, Malacca.

Low, Zhen Sheng and Sufahani, Suliadi (2018) Optimal diet planning for eczema patient using integer programming. In: ISMAP 2017, October 28, 2017, Batu Pahat, Johor.

M. F., Ahmad and S. S., Razali and N., Zakaria and N. N., Abd Mutalib and W. A. S, Wan Hassan and N., Bokhari (2021) Educational game platform kahoot! In teaching and learning process: a case study of new norms. In: 2021 IEEE 9th Conference on Systems, Process and Control (ICSPC 2021), 10–11 December 2021, Malacca.

M. M., Nordiana and Rosli, S. and M. Nawawi, M. N. and I., N. Azwin and I. N. E., Hidayah and Z. A. M., Hazreek and A. B., Andy and M., Saidin (2012) Improved subsurface mapping by enhancing resistivity horizontal resolution. In: 5th Saint Petersburg International Conference & Exhibition, 2-5 April 2012, Saint Petersburg, Russia,.

M. Razali, S. N. A. and Rusiman, M. S. and Zawawi, N. I. and Arbin, N. (2018) Forecasting of water consumptions expenditure using Holt Winter’s and ARIMA. In: ISMAP 2017, October 28, 2017, Batu Pahat, Johor.

M. Sudin,, Azila and Sufahani, Suliadi (2018) Optimization technique with sensitivity analysis on menu scheduling for boarding school student aged 13-18 using “Sufahani-Ismail Algorithm”. In: ISMAP 2018, October 28, 2017, Batu Pahat, Johor.

Mahmood, Salwa and Nasir, Siti Hana and Mamat, Norashid and Abdul Rahman, Ismail and Azis, Noorul Azreen (2022) Ergonomics and manual handling workplace improvement: a case study of firefighter at Pagoh. In: Human-Centered Technology for a Better Tomorrow, 22 FEBRUARY 2021, KL.

Malijan, M. H. and Sharif, J. M. and Abdullah, A. H. and Jamil, M. M. (2019) An enhanced segmentation technique for smokers RBC rouleax coin stacking. In: Sustainable and Integrated Engineering International Conference 2019 (SIE 2019), 8 – 9 December 2019, The Everly Hotel, Putrajaya.

Masdar, Aizan and Ibrahim, B. S. K. K. and Abdul Jamil, Mahadi (2012) Development of wireless-based low-cost current controlled stimulator for patients with spinal cord injuries. In: 2012 IEEE EMBS International Conference on Biomedical Engineering and Sciences, 17th - 19th December 2012, Langkawi.

Masdar, Aizan and Ibrahim, B.S. K. K. and Abdul Jamil, M. Mahadi (2012) Development of wireless-based low-cost current controlled stimulator for patients with spinal cord injuries. In: 2012 IEEE EMBS International Conference on Biomedical Engineering and Sciences, 17th - 19th December 2012, Langkawi.

Maslazim, Norsahira and Sh Ahmad, Sh Salleh (2022) ARENA simulation training guideline for assembly line. In: Research Progress in Mechanical and Manufacturing Engineering.

Md Noh, M. S. and Ahmad, Z. and Ibrahim, A. and Kamarudin, A. F. and Mok, S. N. (2018) Static in-plane shear behaviour of prefabricated wood-wool panel wallettes. In: ISMAP 2017, October 28, 2017, Batu Pahat, Johor.

Mohamed Nafis, Nur Biha and A. Rahim, Mohamad Kamal and Ayop, Osman and Zubir, Farid and A Majid, Huda A comparison of various double loops frequency selective surfaces in terms of angular stability. In: 2019 International Symposium on Antennas and Propagation (ISAP), 27-30 Oct. 2019, Xi'an, China.

Mohd Anuar, Farrah Nuramanina and Othman, Norzila and Altowayti, Wahid Ali Hamood (2021) Assessments of concentrations of sulfur dioxide (SO2) In Universiti Tun Hussein Onn Malaysia (UTHM) Campus Area, Batu Pahat. In: 2021 International Congress of Advanced Technology and Engineering (ICOTEN), 4-5 July 2021, Yemen.

Mohd Jasni, Mohd Safuwan and Samin, Reza Ezuan and Ibrahim, Babul Salam Kader (2012) Biological inspired inspection underwater robot (SNAKEY). In: International Symposium on Robotics and Intelligent Sensors 2012 (IRIS 2012), Sep 4, 2012 - Sep 6, 2012, Sarawak..

Mohd Jasnia, Mohd Safuwan and Samin, Reza Ezuan and Ibrahim, Babul Salam Kader (2012) Biological inspired inspection underwater robot (SNAKEY). In: International Symposium on Robotics and Intelligent Sensors 2012 (IRIS 2012, Sep 4, 2012 - Sep 6, 2012, Sarawak..

Mohd Nasir, Muhamad Alfie Yazid and Zakaria, Normah and Hamzah, Norhasyimah and Rubani, Siti Nur Kamariah and Ariffin, Arihasnida (2014) Student’s attendance system using QR code. In: Research and Innovation in Technical and Vocational Education and Training, UTHM.

Mohd Noor, N. N. and Lee, M. F. (2022) LPG Mass Monitoring Scale with Automatic Gas Leakage Detector System. In: ICE4CT2021, 16th and 17th December 2021, VIRTUAL CONFERENCE.

Mohd Rusli, Muhammad Hafiz Daniel and Hashim, Hairulazwan (2021) Fertilization of food waste management in UTHM’s cafeteria using arduino. In: Progress in Engineering Application and Technology, 22 Jun 2021, UTHM.

Mohd Shaha, Mohd Nashruddin and Ahmad, Faridahanim and Abdullah, Mohd Sufyan and Musa, Mohd Kamaruzaman and Abidin, Nur Izieadiana and Harun, Hasnida and Abdul Hamid, Nor Hazren and Awang, Mariah and Abdul Rahman, Muhammad Ashraf and Hamidon, Nuramidah and Mohamed Yusop, Fatimah and Mustafaa, Mohd Syafiq Syazwan and Kamil, Nur Atikah and Tsu, Yian Lee (2021) Design and development of trash trap of stream for mini hydro. In: https://doi.org/10.1016/j.matpr.2021.05.435.

Mohd Sidek, Roslina and Ahmad, Noraziah and Klaib, Mohamad Fadel Jamil and Abd Wahab, Mohd Helmy (2010) Expediency heuristic in university conference webpage. In: International Conference on Networked Digital Technologies, 2010, Czech Republic.

Mohd Tarmizi, Fatin Amirah and Yasak, Zurina (2022) Development of application for augmented reality for three states of matter. In: Research and Innovation in Technical and Vocational Education and Training, UTHM.

Mohd Yusof, Muhammad Nur Amirulhaq and Nasir, Nurul Fitriah (2022) Effects of reaction temperature and inlet velocity of a bubble column reactor on the bubble size for biodiesel production. In: Effects of Reaction Temperature and Inlet Velocity, 23 November 2021, Melaka, Malaysia.

Mohd. Khalid, Halimi and Zainol, Nur Zainatul Nadra and Samian, Abdul Latif (2012) Konsep Al Asma Al Husna asas pembinaan falsafah ilmu kejuruteraan Islam. In: Seminar Falsafah dan Tamadun 2018 (SEFATA 2018), 12 Nov 2018, USM.

Mokhatar, S. N. and Sonoda, Y. and Kamarudin, A. F. and Md Noh, M. S. and Tokumaru, S. (2017) The effects of pressure dependent constitutive model to simulate concrete structures failure under impact loads. In: ISMAP 2017, October 28, 2017, Batu Pahat, Johor.

Mokhatar, S. N. and Sonoda, Y. and Zuki, S. S. M. and Kamarudin, A. F. (2017) Simulation of shear and bending cracking in RC beam: material model and its application to impact. In: IConCEES 2017, 4 - 5 December 2017, Langkawi, Malaysia.

N., Hamzah and M. F., Ahmad and N., Zakaria and A., Ariffin and S. N. K., Rubani (2021) Technical and vocational education students’ perception of using learning videos during Covid-19 pandemic period. In: IEEE International Conference on Automatic Control and Intelligent Systems (I2CACIS), 26-26 June 2021.

N., Safitri and Rihayat, T. and Suryani, Suryani and Riskina, S. and M. Jazuli, M. Jazuli and Siregar, J. P. and Jaafar, J. and T. Cionita, T. Cionita and Fitria, Fitria (2020) Efficiency of photovoltaic technology for Citronella oil distillation. In: ICMER 2019, Jul 30, 2019 - Jul 31, 2019, Kuantan, Pahang, Malaysia.

Ng, Ban Kiong and Akasah, Zainal Abidin (2011) Maintenance factor for precast concrete in IBS: A review. In: National Postgraduate Conference (NPC), 19-20 Sept. 2011.

Ng, L.Y. and Lee, J.J. and Ng, C.Y. and Mahmoudi, E. and Hairom, N.H.H. and Ong, C.B. (2020) Performance of graphene-based hydrogel in oil removal using graphene oxide derived from powder and flake graphite. In: International Conference on Sustainable Energy and Green Technology 2019, 11 Dec 2019 – 14 Dec 2019, Bangkok, Thailand.

Ng, Si Jin and Yong, Tze Mi (2021) Evaluation of high density polyethylene plastic bag performance towards edge and point stresses using taguchi method. In: Progress in Engineering Application and Technology, 22 Jun 2021, UTHM.

Nor Azman, Nor Farah Amirah and Othman, Siti Amira A comprehensive review of banana based paper. In: -, -, -.

Nor Azman, Nor Farah Amirah and Othman, Siti Amira and Abu Bakar, Nurul Fathihah and Jasrin, Nurin Saqinah (2018) Safety culture in handling radioactive materials: a review. In: -, -, -.

Osman, Nor Naqiuddin and Razali, Nizamuddin and Gerijih, Debie Devissr and Baharudin, Nurhayati and Nur Yunus, Faizal Amin and Ali, Khairul Fahmi (2021) Thermal comfort in the productivity of students' learning at faculty of technical and vocational education. In: Research and Innovation in Technical and Vocational Education and Training, UTHM.

Othman, Mohammad Haris Haikal and Arbaiy, Nureize and Che Lah, Muhammad Shukri and Pei-, Chun Lin Fuzzy random based mean variance model for agricultural production planning. In: The 4th International Conference on Soft Computing and Data Mining (SCDM 2020), 22-23 January 2020, Melaka, Malaysia.

Othman, N. and Haris, H. and Fatin, Z. and Najmuddin, M. F. and Sariyati, N. H. and Md-Zain, B. and Abdul-Latiff, M. A. (2021) A review on environmental DNA (eDNA) metabarcoding markers for wildlife monitoring research. In: International Conference on Biodiversity 2020, November 4-5, 2020, Melaka, Malaysia.

Othman, Siti Amira and Jasrin, Nurin Saqinah Surfactant effect in detergent formulation: a review. In: -, -, -.

Othman, Siti Amira and Radiman, Shahidan and Khoo, Kok Siong (2010) Methanol as a suitable solvent for Polyaniline Emeraldine Base (PANI‐EB). In: AIP Conference Proceedings, 20 July 2010.

Othman, Siti Amira and Radiman, Shahidan and Khoo, Kok Siong (2010) A hydrogen peroxide biosensor based on nanoparticle PANI/HRP electrode. In: -.

Pairan, M. Rasidi and Asmuin, Norzelawati and Mat Isa, Nurasikin and Sies, Farid (2022) Characteristic study of flat spray nozzle by using Particle Image Velocimetry (PIV) and ANSYS simulation method. In: 7th International Conference on Mechanical and Manufacturing Engineering.

Pillay, Khuneswari Gopal and Mohd Padzil, Siti Aisyah (2018) Model-building on survivability of upper gastrointestinal bleed patient’s. In: 3rd International Conference on Mathematical Sciences and Statistics, Feb 6 - 8 2018, Putrajaya.

Rahim, MKA and Hamid, MR and Samsuri, NA and Murad, NA and Zubir, F and Ayop, O and Yusof, MFM and Majid, HA (2019) Antenna with artificial magnetic conductor for wireless application. In: 2019 IEEE Asia-Pacific Conference on Applied Electromagnetics (APACE), 25 - 27 November 2019, Malacca, Malaysia.

Ramdzan, S. N. and Mohamed, R. M. S. R. and Kamaruzaman, N. H. and A. Gheeti, A. A. S. and Hamdan, R. and Musa, Sabariah (2022) Pre-treatment of laundry greywater by steel slag for safe disposal. In: ICONCEES-2021, 15 & 16 November 2021, Virtual conference.

Rihayat, T. and Suryani, Suryani and Riskina, S. and Siregar, J. P. and Jaafar, J. and Cionita, T. and Fitria, Fitria (2020) Making polyurethanes from castor oil with addition of bentonite and chitosan as coating paints on eco-friendly medical device applications. In: ICMER 2019, Jul 30, 2019 - Jul 31, 2019, Kuantan, Pahang, Malaysia.

Rihayat, T. and Suryani, Suryani and S. Riskina, S. Riskina and J. P., Siregar and Jaafar, J. and T. Cionita, T. Cionita and Fitria, Fitria (2020) Bio-Nanocomposite Polyurethane / Clay / Chitosan Paints that have thermal resistance and antibacterial properties for biomedical applications. In: ICMER 2019, Jul 30, 2019 - Jul 31, 2019, Kuantan, Pahang, Malaysia.

Ruslan, Mohd Syamil and Osman, Mohamad Hairi and Mahamad, Mimi Suliza and A Rahman, Noor Khazanah and Adnan, Suraya Hani and Salim, Salman and Mat Nor, Ahmad Hakimi (2020) Mechanical properties of concrete containing palm oil fuel ash and modified expanded polystyrene beads as replacement materials using finite element method. In: Progress in Engineering Application and Technology, UTHM.

Salleh, R. M. and Zawawi, N. I. and Gan, Z. F. and Nor, M. E. (2018) Autocorrelated process control: Geometric Brownian Motion approach versus Box-Jenkins approach. In: ISMAP 2017, October 28, 2017, Batu Pahat, Johor.

Sapaat, Azri Izani and Katimon, Mohd Nizam (2022) Simulation study of BACM mold respect to temperature distribution. In: Research Progress in Mechanical and Manufacturing Engineering.

Sarani, Noor Amira and Abd Kadir, Aeslina (2013) Thermal conductivity of fired clay bricks incorporated with cigarette butts. In: Advanced Materials Research, 2013.

Saravanan, S. S. and Majid, H. A. and Esmail, B.A.F and Fadhali, N. and Abidin, Z.Z. and Shah, S.M. and Rahim, M.K.A. (2019) Multiband monopole antenna for mobile applications. In: 2019 IEEE Asia-Pacific Conference on Applied Electromagnetics (APACE), 25-27 November 2019, Melaka, Malaysia.

Selimin, M. A. and A. Latif, A. F. and Er, Y. C. and Muhamad, M. S. and Basri, H. and Lee, T. C. (2022) Adsorption efficiency of banana blossom peels (musa acuminata colla) adsorbent for chromium (VI) removal. In: Materials Today: Proceedings.

Selimin, M. A. and A. Latif, A. F. and Lee, C. W. and Muhamad, M. S. and Basri, H. and Lee, T. C. (2022) Adsorption efficiency of hydroxyapatite synthesised from black tilapia fish scales for chromium (VI) removal. In: Materials Today: Proceedings.

Shafi, Muhammad Ammar and Rusiman, Mohd Saifullah and Nor, Maria Elena and Khamis, Azme and Abdullah, Siti Nabilah Syuhada and Azmi, Mohd Syafiq and Zainal Abidin, Munirah Sakinah and Ali, Maselan (2018) The factors that influence job satisfaction among royal Malaysian customs department employee. In: ISMAP 2017, October 28, 2017, Batu Pahat, Johor. (In Press)

Shahedan, Noor Fifinatasha and Abdullah, Mohd Mustafa Al Bakri and Mahmed, Norsuria and Kusbiantoro, Andri (2021) The influence of density, compressive strength and thermal conductivity under variety percentage of glass bubble in geopolymer concrete. In: AIP Conference Proceedings, 5 Mei 2021.

Shukur, Muhammad Mahathir and Hilmi Syed Mohamad, Syed Burhanuddin Hilmi (2021) Comparative study on the effectiveness of building maintenance scheduling between two multipurpose hall buildings. In: Recent Trends in Civil Engineering and Built Environment, UTHM.

Suryani, Suryani and T Rihayat, T Rihayat and Nurhanifa, Nurhanifa and Siregar, J. P. and Jaafar, J. and T. Cionita, T. Cionita and Fitria, Fitria (2020) Green composites of natural fiber bamboo/pineapple leaf/coconut husk as hybrid materials. In: ICMER 2019, Kuantan, Pahang, Malaysia, Jul 30, 2019 - Jul 31, 2019.

Syed Othman, Syed Muhammad Arif and Yasak, Zurina (2022) Development of an Online Zakat Application System. In: Research and Innovation in Technical and Vocational Education and Training, UTHM.

Talib, Norfazillah and Sabri, Ainaa Mardhiah and Jamaluddin, Nor Athira and Suhimi, Mohamad Hafiz Akmal and Abdul Sani, Amiril Sahab (2022) Effect of vegetable-based nanofluid enriched with nanoparticles as metalworking fluids during orthogonal cutting process. In: Proceedings of the 3rd Malaysian International Tribology Conference, 23 February 2022, Online.

Teuku Rihayat, Teuku Rihayat and Suryani, Suryani and Siregar, Januar Parlaungan and Satriananda, Satriananda and Yunus, M. M. and Sariadi, Sariadi and Fitria, Fitria and Shafira Riskina, Shafira Riskina and Zuhra Amalia, Zuhra Amalia and Syahputra, Wildan and Nurhanifa, Nurhanifa and Safari, Safari and Nurul fitriah, Nurul fitriah and Mardani, Mardani and Jaafar, Jamiluddin (2019) Synthesis and characterization of North Aceh CEC bentonite determination with methylene blue method and increased D- Spacing after addition of surfactants CTAB-SDS. In: 1st South Aceh International Conference on Engineering and Technology, Indonesia 8 – 9 December 2018, Kabupaten Aceh Selatan.

Teuku Rihayat, Teuku Rihayat and Suryani, Suryani and Siregar, Januar Parlaungan and Zaimahwati, Zaimahwati and Salmyah, Salmyah and Helmi, Helmi and Sariadi, Sariadi and Fitria, Fitria and Satriananda, Satriananda and Alfian Putra, Alfian Putra and Zahra Fona, Zahra Fona and Juanda, Juanda and Raudah, Raudah and Mawaddah, Mawaddah and Nurhanifa, Nurhanifa and Shafira Riskina, Shafira Riskina and Syahputra, Wildan and Jaafar, Jamiluddin (2019) Wound dressing based on banana peels waste and chitosan by strengthening lignin as wound healing medicine. In: 1st South Aceh International Conference on Engineering and Technology, 8 – 9 December 2018, Kabupaten Aceh Selatan, Indonesia.

Teuku Rihayat, Teuku Rihayat and Suryani, Suryani and Uswatun Hasanah, Uswatun Hasanah and Nurhanifa, Nurhanifa and Siregar, Januar Parlaungan and Jaafar, Jamiluddin and Cionita, Tezara and Fitria, Fitria (2020) Geraniol quality improvement on citronella oil as raw material for making anti-bacterial perfumes. In: ICMER 2019, Jul 30, 2019 - Jul 31, 2019, Kuantan, Pahang, Malaysia.

Uddin, Salah and Mohamad, Mahathir and Khalid, Kamil and Abdulhammed, Mohammed and Rusiman, Mohd Saifullah and Che-Man, Norziha and Roslan, Rozaini (2018) Blood flow problem in the presence of magnetic particles through a circular cylinder using Caputo-Fabrizio fractional derivative. In: ISMAP 2017, October 28, 2017, Batu Pahat, Johor.

Wahab, Nur Syazwan and Rusiman, Mohd Saifullah and Mohamad, Mahathir and Azmi, Nur Amira and Che Him, Norziha and Kamardan, M. Ghazali and Ali, Maselan (2018) A technique of fuzzy C-Mean in multiple linear regression model toward paddy yield. In: ISMAP 2017, October 28, 2017, Batu Pahat, Johor.

Wan Kadir, Wan Muhamad Hanif and Samin, Reza Ezuan and Ibrahim, Babul Salam Kader (2012) Internet controlled robotic arm. In: International Symposium on Robotics and Intelligent Sensors 2012 (IRIS 2012), Sep 4, 2012 - Sep 6, 2012, Sarawak..

Yaman, Siti Khalijah and Khamis, Norasyikin and Mohammad, Hairuddin and Suratkon, Azeanita and Syed Mohamad, Syed Burhanuddin Hilmi and Abu Bakar, Hasniza Observation of temporary accommodation for construction workers according to the code of practice for temporary construction site workers amenities and accommodation (ms2593:2015) in Johor, Malaysia. In: ICONBUILD & RCCE 2019, 20 – 22 AUGUST 2019, ADYA HOTEL, LANGKAWI, MALAYSIA.

Yusoff, Mohd Ashiq Kamaril and Samin, Reza Ezuan and Ibrahim, Babul Salam Kader (2012) Wireless mobile robotic arm. In: International Symposium on Robotics and Intelligent Sensors 2012 (IRIS 2012), Sep 4, 2012 - Sep 6, 2012, Sarawak..

Zahari, Fatin Z. and Khalid, Kamil and Roslan, Rozaini and Sufahani, Suliadi and Mohamad, Mahathir and Rusiman, Mohd Saifullah and Ali, Maselan (2018) Forecasting natural rubber price in Malaysia using Arima. In: ISMAP 2017, October 28, 2017, Batu Pahat, Johor.

Zawawi, M. A. and Wan Zamani, W. M. S. and Ahmad, M. A. and Saealal, M. S. and Samin, R. E. (2011) Feedback control schemes for gantry crane system incorporating payload. In: 2011 IEEE Symposium on Industrial Electronics and Applications (ISIEA2011), September 25-28, 2011, Langkawi, Malaysia.

Zolkifli, Nur Syazlin and Nazari, Ain (2020) Tracing of strabismus detection using hough transform. In: 2020 IEEE Student Conference on Research and Development (SCOReD), 27-28 September 2020, Johor, Malaysia.

Zubair Rehman, Muhammad and Mohd Nawi, Nazri and Tanveer, Aisha and Zafar, Hassan and Munir, Hamza and Hassan, Sher Lungs cancer nodules detection from ct scan images with convolutional neural networks. In: The 4th International Conference on Soft Computing and Data Mining (SCDM 2020), 22-23 January 2020, Melaka, Malaysia.

wer, er (2021) Preparation and characterization of irradiated magnetic pineapple leaves for paper production. In: SCIEMATHIC 2020, 1-2 December 2020, UTHM.

Book

Abu Ziden, Azidah and Abd Aziz, Mohd Ismail and Gunasegaran, Thenmolli and Abdullah, Nurhanim Saadah (2016) Himpunan Modul TMK Untuk Sekolah Siri 1. Siri 1: Pengurusan Komputer, Data dan Maklumat Sekolah, 1 . Unit Penyelidikan Pendidikan Asas, USM. ISBN 978-967-399-250-8

Anting, Nickholas (2022) Data science with KNIME. NASPSOFT Intelligence Academy. ISBN 978-629-96941-0-6

Hashim, Suhaizal and Abdullah, Nurhanim Saadah and Hamzah, Usuloudin (2022) Revolusi Industri. Penerbit UTHM, UTHM.

Kok, Keong Choong and Jaganathan, Jayaprakash and Mohd Zuki, Sharifah Salwa and Shahidan, Shahiron and Ramzi Hannan, Nurul Izzati Raihan (2021) Concrete-filled double skin steel tubular column with hybrid fibre reinforced polymer post fire repair. Springer, Springer Singapore. ISBN 978-981-16-2714-9

Mohd Zuki, Sharifah Salwa and Mokhatar, Shahrul Niza and Shahidan, Shahiron and Wan Ibrahim, Mohd Haziman (2020) Proceedings of the Sustainable Concrete Materials and Structures in Construction 2020. Springer. ISBN 978-981-16-2186-4

Mudjanarko, Sri Wiwoho and Supriyatno, Dadang and Prasetijo, Joewono and Mohd Masirin, Mohd Idrus and Wiwoho, Firdaus Pratama (2019) Panduan pembuatan web parkir. Narotama University Press. ISBN 978-602-6557-84-1

Ng, Kim-Soon (2012) Quality management system and practices. IntechOpen.

Omar, Siti Sarah and Mohd Aris, Nurul Fadzilla (2021) Leading through the COVID-19 crisis. Penerbit UTHM, UTHM. ISBN 978-967-2817-52-9

Thesis

A. M. Abujarad, Sawsan (2018) Impact of midwives practices initiation on postpartum haemorrhage reduction in public hospitals in Gaza strip, Palestine. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ab. Latiff, Maizatul Azmah (2021) Amalan guru dalam pelaksanaan program pendidikan inklusif dari aspek kolaboratif dan adaptasi di sekolah rendah. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Abd Aziz, Noreen Noor (2021) Predicting halal cosmetics purchase intention among consumers in Johor Darul Takzim. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Abd Hamed, Noor Kamalia (2021) Band gap tailoring of flower-like rutile-phased TiO2 nanostructured film grown via facile hydrothermal doping process for photocatalytic degradation of methylene blue. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Abd Hamid, Aizathul Hani (2020) Pola hubungan sosial rentas etnik dalam kalangan belia: Kajian kes di Pasir Gudang, Johor. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abd Malik, Ahmad Khairul (2021) The influence of particle size towards the resistivity and chargeability value for groundwater investigation interpretation. Masters thesis, Universiti Tun Hussein Malaysia.

Abd Rahman, Sa’afilah (2021) Pembangunan model klasifikasi penilaian kondisi fasad rumah kedai awal di pusat bandar Muar, Bandar Di Raja Johor. Masters thesis, Universiti Tun Hussein Malaysia.

Abd Razak, Kamal Firdausi (2002) Portal pendidikan teknik dan vokasional : satu analisis di kalangan pelajar Sarjana Teknik dan Vokasional Kolej Universiti Teknologi Tun Hussein Onn. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Abda Alsalim, Hafudh Farhood (2021) The Loss Of Identity In Emily Bronte‘S Wuthering Heights and K. S. Maniam‘S The Return in relation to communication issues: A critical analysis. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Abdelrahman Suliman, Hussameldin Mohamed (2022) Design of a stand-alone PV system using PVSYST software for KKTF Residential Collage, UTHM Malaysia. Masters thesis, Universiti Tun Hussein Malaysia.

Abdul Aziz, Muhamad Amirul Ashraf (2018) Diversity, species composition and distribution of odonates (odonata) in Johor state, peninsular Malaysia. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdul Gani, Ahmad Faiz Hilmi (2021) Design and analysis of multiphase dc/dc boost converter with minimized input current ripple. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdul Latiff Janaton, Noor Aqilah (2021) Apology strategies used by hotel management students in response to conflicts and challenges. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdul Manaf, Adib Fikri (2022) Evaluation of polyethylene terephthalate in concrete. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdul Rahim, Putri Syalabiah (2021) The effects of silica (SiO2) derived from rice husk composition and sintering temperature on the fabrication of silica (SiO2) and silica-nickel oxide (SiO2-NiO) porous bodies. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdul Rahman, Syahrul Aziana (2018) The development of entire body risk asssessment (ENBORA) method for work related musculoskeletal disorders (WMSDs). Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdul Razak, Muhammad Azmil (2021) Assessment of ecosystem integrity of lowland dipterocarp forest ecosystem using remote sensing. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Abdul Razak, Muhammad Thariq (2020) Mobile health applications digital evidence taxonomy with knowledge sharing approach for digital forensics readiness. Masters thesis, Universiti Tun Hussein Malaysia.

Abdul Shukor, Nor Hidayah (2004) Pembangunan modul pembelajaran autocad dan kajian penerimaan pelajar. Satu kajian kes di Politeknik Kota Bharu. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Abdulameer, Ali Hussein (2021) Systemic functional linguistics of eastern and western leaders' reaction towards trump's decision of recognizing Jerusalem as Israel Capital. Doctoral thesis, Universiti Tun Hussein Malaysia.

Abdulaziz Al-Shalif, Abdullah Faisal (2020) Sequestration of carbon dioxide (CO2) using bio-foamed concrete brick incorporating bacillus tequilensis bacteria. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Abdulla Lari, Mohamed Ahmed Darwish (2020) The role of innovative approach on employees’ job performance: a study of government sector in Abu Dhabi, UAE. Doctoral thesis, Universiti Tun Hussein Malaysia.

Abdullah, Abdullah Ibrahim (2022) Design of a hybrid haptic wearable device for upper limb amputees to recover the missing sensation. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdullah, Azman (2004) Pembangunan laman web prosedur amalan keselamatan bengkel kayu bagi membantu proses pembelajaran di KUiTTHO. Masters thesis, Fakulti Teknologi Kejuruteraan.

Abdullah, Iqbal Shahridzuan (2022) Investigation of synthethic diesel fuels and combustion characteristics using rapid compression machine (RCM). Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdullah, Mariam (2002) Keberkesanan penggunaan model dalam pengajaran dan pembelajaran lukisan geometri dan binaan bangunan mempengaruhi prestasi pelajar di sekolah menengah teknik. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Abdullahi Baba, Bashir (2021) The influence of Islamic banking products’ features on customer satisfaction in Nigeria. Masters thesis, Universiti Tun Hussein Malaysia.

Abdulmaged Al-Flayyih, Alyaa Idrees (2022) Synthesis and characterization of a potential alginate-gelatin-cholesteryl ester liquid crystals bioink for tissue engineering applications. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abed, Farook Nehad (2021) Enhancement the performance of wire cutting process by additives nanopowder alumina (Al2O3). Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Abidi, Muhammad Adib (2022) Optimization of operating parameters in microbial consortium (AB-101) preparation and application in palm oil mill effluent (POME) primary treatment. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abubakar Bawuro, Faiza (2020) The linkage between motivational mechanisms, meaningful work and teachers’ innovative behaviour in public secondary schools in Northeast, Nigeria. Doctoral thesis, Universiti Tun Hussein Malaysia.

Adamu, Mohammed Hamisu (2018) Determination of competency framework for technical and vocational education and training (TVET) educators in Nigerian tertiary institutions. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ag Kanak, Fadzilah (2021) Ethnobotany of traditional vegetables used by Sama-Bajau community in Kota Belud, Sabah, and phytochemical and anti-aging investigation of crassocephalum crepidioides. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Ahmad, Fatin Nor (2022) Characterization and analysis of pentacene and oxide thin films for an organic-inorganic heterojunction diode photodetector application. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ahmad, Muhammad Fazrulhelmi (2021) Pembelajaran berasaskan aplikasi iedutech berdasarkan gaya pembelajaran visual dalam kalangan pelajar Pendidikan Teknikal Dan Vokasional (PTV). Masters thesis, Universiti Tun Hussein Malaysia.

Ahmad, Norazlina (2021) Optimisation and modification of TiO2 nanorods towards a highly efficient interfacial layer for uniformly CU2O deposition in heterojunction solar cell applications. Doctoral thesis, Universiti Tun Hussein Malaysia.

Ahmad Razali, Nazamuddin (2003) Penghasilan modul pembelajaran lukisan kejuruteraan berbantukan komputer. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Ahmad Zubir, Raudhah Adibah (2022) Kerangka kemahiran kebolehpasaran dalam pekerjaan berasaskan projek berdasarkan keperluan industri di Johor. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ahmed Shakir, Alaa (2021) Effect of palm oil waste and quarry dust on the properties of hybrid blocks. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Al-Qaisi, Mohammed Murad (2022) Factors affecting the implementation of occupational safety and health management system (OSHMS) in Malaysia petrochemical industry. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ali, Roszaidi (2018) Amalan keselamatan pengurusan tapak bina oleh majikan pekerja di dalam industri pembinaan. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ali Hussein, Maher (2014) Development of a computer aided decision support tool for selecting organisational improvement initiatives. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Alwali Almazrouei, Abdulla Nasir Ali (2021) Developing a specialised strategy framework to improve performance in traffic department of Abu Dhabi Police. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Alwi Kutty, Nur Azureen (2020) Development of the porcelain tiles by the partial substitution of feldspar with fly ash. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Aminuddin, Mohamad Yuzwan Aliff (2021) Mechanical and durability properties of sand cement brick containing recycled concrete aggregate and crumb rubber as partial sand replacement material. Masters thesis, Universiti Tun Hussein Malaysia.

Amir, Nur `Aisyah (2018) Microstrip patch array rectenna with harmonic suppression capability for energy harvesting application. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Anpalagan, Ranjhini (2022) Investigation on mechanical properties of cockle shell composite structure under temperature and aging influence. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Anwar Hussin, Mumtaz (2021) A comparative study on improvement of image compression method using hybrid of DCT and DWT techniques with huffman encoding. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Arbain, Siti Hajar (2022) Multifunctional optimized group method data handling for software effort estimation. Doctoral thesis, Universiti Teknologi Malaysia.

Asad, Saira (2021) A comparative analysis of online alternative & mainstream newspapers in Malaysia & Pakistan during the 2018 general election. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Asgher, Hafiz Maaz (2022) An improved grey wolf with whale algorithm for optimization functions. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Audu, Babagana (2021) Design and analysis of frequecy selective surface. Masters thesis, Universiti Tun Hussein Malaysia.

Ayub, Afiq Azim (2022) Augmented reality application to improve remedial student’s learning performance. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Azman, Naqibah (2021) Establishment of checklist of design for safety (DfS), life cycle analysis (LCA) and design for manufacturing (DFM) for ivd medical device based on IEC 60601. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Azman, Naqibah (2021) Establishment of checklist of design for safety (DfS), life-cycle analysis (LCA) and design for manufacturing (DFM) for IVD medical device based on IEC 60601. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Bakari, Ibrahim Bala (2021) PGLDA: enhancing the precision of topic modelling using poisson gamma (PG) and latent dirichlet allocation (LDA) for text information retrieval. Doctoral thesis, Universiti Tun Hussein Malaysia.

Basheer, Huma (2021) A hybrid modified group method of data handling with the wavelet decomposition for oil palm price forecasting. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Birahim, Muhamad Fikri Shahkhirin (2021) Design and simulation of different excitation coil arrangements in magnetic particle imaging technique for single sided scanner. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Che Wan Razak, Che Wan Husna Syahirah (2021) Keberkesanan modul pengintegrasian teori penyelesaian masalah inventif dalam pembelajaran berasaskan masalah di UTHM. Masters thesis, Universiti Tun Hussein Malaysia.

Chellathurai, Bumaran (2018) Development of a new device to measure finger's mean arterial pressure. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Chew, Eng Sun (2021) The effectiveness of the creativity trigger module in achieving higher levels of creative thinking among prospective teachers. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Chi Adam, Mohd Khairil Anbia (2020) Development of open platform controller for step-NC compliant CNC system. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Chin, Desmond Daniel Vui Sheng (2020) Development of biodegradable composite micro-perforated panel made from natural fibre composites with evaluation of its acoustic and mechanical properties. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Chin Foo, Lee (2021) Management factors affecting time and cost performance of construction projects. Masters thesis, Universiti Tun Hussein Malaysia.

Chua, Wee Heng (2022) An optimum design of a two-stage operational amplifier using carbon nanotube field-effect transistor at 10 nm technology node. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Dahri, Salma (2018) Social emotional skills (SES) among lecturers in relation students performance. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Darsani, Adilah (2021) The fused deposition modeling of POFA reinforced composites polymer. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Dounia, Melloul (2021) Design and control a myoelectric prosthetic limb for trans humeral amputation. Masters thesis, Universiti Tun Hussein Malaysia.

Eee, Chinge Tien and Yii, Chai Tin (2022) Hubungan efikasi kendiri, beban tugas dan masalah kesihatan mental dalam kalangan guru di kolej vokasional. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Fadzil, Nur Syuhada (2021) Barriers and enablers in risk management practices in construction industry amongst bumiputera contractors. Masters thesis, Universiti Tun Hussein Malaysia.

Farhan, Raed Nafea (2021) Utilization of online discussions to enhance students' engagement with William Golding's "Lord of The Flies". Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Fong, Mun Kit (2021) Polycaprolactone (PCL) / polylactice acid (PLA) reinforced with polyethlene gylcol (PEG) and nano- hydroxyapatite (n-HA) for fused deposition modeling (FDM) composite filament. Masters thesis, Universiti Tun Hussein Malaysia.

Foo, Chin Thoong (2020) Biopattern: a biomimetic design framework for generating bio-inspired design (biomimicry). Doctoral thesis, Universiti Tun Hussein Malaysia.

Gambo, Abdu (2017) Implication for office environment ergonomic intervention: a study of local government offices in Katsina State of Nigeria. Masters thesis, Universiti Tun hussein Onn Malaysia.

Ghadhban, Haitham Qutaiba (2021) Ensemble learning using multi-objective optimisation for arabic handwritten words. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Ghani, Noraiysah (2018) Reka bentuk pembelajaran atas talian bagi program kejuruteraan mekanikal Kolej Vokasional. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ghitheeth, Ali Hussein (2021) Thermal performance enhancement of a heat exchanger using metal chain as a novel turbulator. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Hadid, Khattab Ibrahim (2021) The mediating effect of customer satisfaction on the relationship between digital banking service quality and customer loyaltytitle. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Haitham, Al Fatli (2022) New energy-efficient-user clustering and power allocation for NOMA in 5G millimeter-wave massive MIMO. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Hamdan, Mohamad Alif Hakimi (2022) The performance of different types of flower-like zinc oxide for photocatalytic desulfurization of synthetic thiophene. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Hamid Yaseen, Maryam (2021) An integrated framework for lean production and marketing mix strategy toward business performance. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Hamizat, Nurul Hazirah (2021) The relationship between emotional intelligence and job performance: a case of O&G industry in Malaysia. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Hammoodi, Ahmed Talaat (2022) New methods of windowing for reducing the out of band emission with low complexity in the 5G waveform. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Hamza, Sabah Salim (2021) Crashworthiness capability of jute and glass fibre reinforced epoxy tubes under quasi-static loading condition for automotive application. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Hamzah, Shahidah (2016) Penggunaan teknik bio maklumbalas bagi mengukur ciri-ciri disiplin dan tanggungjawab dalam kalangan mahasiswa. Doctoral thesis, Universiti Malaysia Pahang.

Haris, Norhidayah (2021) DNA metabarcoding and phytochemical analysis of plants consumed by banded langur (presbytis femoralis) in Johor. Masters thesis, Universiti Tun Hussein Malaysia.

Hashim Kareem, Zahraa (2021) Framework for pedestrian walking behaviour recognition to minimize road accident. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Hillary, Ermyza (2022) Utilization of demolished tile material and cement to stabilize marine clay. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ho, Choon Sin (2021) Characterisation of deformation behaviour and damage progression of recycled aluminium alloy AA6061. Doctoral thesis, Universiti Tun Hussein Malaysia.

Hong, Fan Wei (2021) Near infrared diffuse reflectance measurement set-up in non-destructive brix measurement for intact pineapples. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Hujale Ibrahim, Abdishakur Ali (2021) RF energy harvesting antenna. Masters thesis, Universiti Tun Hussein Malaysia.

Hussin, Mohd Sabri (2003) Pembinaan web CD pembelajaran bagi matapelajaran lukisan berbantukan komputer (AutoCAD) dalam penghasilan permodelan 3D. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Ibraheem, Mohammed Khalid (2021) Modelling and developing of microstrip rotman lens based on electric field analysis and defected ground structure. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Ibrahim, Noor Saidatul Maya (2022) Evaluation on performance and environmental impacts of the revived industrial lead-acid batteries. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ibrahim, Nurul Saliha Amani (2022) Resource-efficient coverage path planning for unmanned aerial vehicle based aerial gateway in LoRaWAN. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ibrahim Awada, Nesreen (2021) Happiness and employee performance: the moderating role of employee spirituality and emotional wellness. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Iliyas Ahmad, Maznah (2021) Integrated monitoring system based on service-oriented IOT architecture in open step-nc environment. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Ishfaq, Rahila (2021) Synthesis and characterization of metal sulfates loaded palm empty fruit bunch for biodiesel production. Masters thesis, Universiti Tun Hussein Malaysia.

Ismail, Nurhuda (2003) Satu tinjauan terhadap tahap pengetahuan guru teknikal dalam pembinaan item objektif di tiga buah sekolah menengah teknik. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Isnin, Sabrina (2003) Pengetahuan dan kemahiran teknologi maklumat dan komunikasi di kalangan pensyarah jabatan perdagangan politeknik: satu tinjauan. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Jaafar, Razi (2021) Tahap kesedaran terhadap pelan integriti Polis Diraja Malaysia 2016-2020 dalam kalangan pegawai polis di Daerah Klang, Selangor. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Jabbar, Abdullah Hasan (2021) Physical and biological characteristics of silver/ polyvinylpyrrolidone nanocomposite using pandanus atrocarpus. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Jaber, Ayad Jasim (2021) Performance enhancement of the photovoltaic cells system by using the pneumatic routers. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Janis, Ilyana (2021) Exploring technician competency requirements in industry 4.0 apparel shop floor production. Doctoral thesis, Universiti Tun Hussein Malaysia.

Jasim, Mohammed Jamal (2021) The potential of porcelain waste as sand replacement to produce high strength concrete. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Jofri, Muhamad Hanif (2021) A quality of experience approach in smartphone video selection framework for energy efficiency. Doctoral thesis, Universiti Tun Hussein Malaysia.

Johar, Siti Hajar (2018) Keberkesanan pengaplikasian e-modul semiconductor devices menggunakan augmented reality bagi Pelajar Kejuruteraan Elektronik di Politeknik Merlimau, Melaka. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Johari, Nurul Nadia (2021) Particle size and preloading pressure Relationship on the consolidation properties of peat soil. Masters thesis, Universiti Tun Hussein Malaysia.

Jong, Oi Ka (2021) Determination of tensile properties and moisture effect of areca leaf sheath subjected to flattening process. Masters thesis, Universiti Tun Hussein Malaysia.

Jubair, Mohammed Ahmed (2022) A framework for automated quality assessment of software requirement specification based on part-of-speech tagging, multi-agent k-means clustering and case-based reasoning. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Kadhim, Sami Abdullah (2020) A model for implementation of total quality management practices on education performance in Iraq secondary schools. Doctoral thesis, Universiti Tun Hussein Malaysia.

Kamal, Mustafa Subhi (2020) New CFAR algorithm and circuit development for radar receiver. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Kamardin, Ili Liyana Khairunnisa (2021) Low-temperature growth of zinc oxide structures on flexible conductive substrate: effect of naoh and C7H8O9 presence in sol-gel. Masters thesis, Universiti Tun Hussein Malaysia.

Kandari, Mohd. Azamri (2001) Perlaksanaan mata pelajaran pendidikan teknik dan vokasional di peringkat sekolah menengah kebangsaan: satu tinjauan di daerah Batu Pahat. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Kareem, Ali Kamil (2021) Parametric optimization of the femoropopliteal artery stent design based on numerical analysis. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Khairulfuaad, Riyadhthusollehan (2021) Computational analysis on micro-shunt of minimally invasive glaucoma-surgery (MIGS) in severe glaucoma. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Khamis, Norasyikin (2018) Perlaksanaan MS 2593:2015 (kod amalan kemudahan kediaman sementara pekerja tapak bina) di kalangan kontraktor gred 6 dan gred 7. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Khan, Zohaib (2021) Barriers factor of ISO 9001:2015 implementation in the manufacturing industry of Pakistan. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Khoo, Weily (2021) Electrospun fish skin gelatin scaffolds for functional tissue engineering of articular cartilage. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Krishnan, Puganesri (2021) Kemahiran pemikiran komputasional pelajar melalui modul pembelajaran berasaskan teknologi internet pelbagai benda. Masters thesis, Universiti Tun Hussein Malaysia.

Lai, Chee Fung (2022) The simulation study of preheating temperature and blank thickness on hot press forming of aluminium alloy 6061. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Lee, Wee Haw (2022) Correlation factors and demographic characteristics on homebuyer’s purchase decision amid covid-19 pandemic at Pasir Gudang, Johor. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Leman, Abdul Mutalib (2011) Development of industrial air pollution monitoring system for safety and health enhancement and sustainable work environment in small and medium industries (SMI's). Doctoral thesis, Universiti Teknologi MARA.

Liew, Pok Huai (2022) A comparison study on the economic performance of conventional streetlight and solar streetlight in Batu Pahat. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Lim, Chun Lan (2021) A study on the profile of solid waste and its reduction alternatives at Universiti Tun Hussein Onn Malaysia (UTHM), Pagoh Campus, Muar, Johor. Masters thesis, Universiti Tun Hussein Malaysia.

Lim, Shing Chee (2022) Development of electrospinning machine for the production of homogeneous and functionally graded multilayer polymeric nanofibers. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Maarof, Nurul Amiera Shahida (2022) Fabrication of hexagonal zinc oxide nanorods on seeded substrate via hydrothermal method. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mahli, Maximus Kohnizio (2021) Wear behavior and mechanical properties of al-based FGM. Masters thesis, Universiti Tun Hussein Malaysia.

Majeed, Ali Hussien (2022) Designing memory cells with a novel approaches based on a new multiplexer in QCA Technology. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Masduki, Masadliahani (2021) Model kemahiran komunikasi tempat kerja (KKTK) Pelajar Kejuruteraan Awam Politeknik Malaysia. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Mat Hasan, Norsuhada (2022) Kepuasan kerja graduan hospitaliti terhadap ketekalan kerja di industri perhotelan. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mat Salleh, Mohamad Ariff (2022) The cause and effect of fall from height accidents and mitigation measures in Peninsular Malaysia. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mathelinea, Devy (2021) Cost optimisation of Malaysia medicine inventory through demand forecasting and nonlinear inventory model. Masters thesis, Universiti Tun Hussein Malaysia.

Md Kamaruddin, Nafisah @ Kamariah (2021) The effect of contextual teaching on cognitive and non-cognitive learning construct among engineering students. Doctoral thesis, Universiti Tun Hussein Malaysia.

Md Kamaruddin, Nafisah @ Kamariah (2021) The effect of contextual teaching on cognitive and noncognitive learning construct among engineering students. Doctoral thesis, Universiti Tun Hussein Malaysia.

Md Yasser, Mona Alis (2022) XPS analysis on tribofilm formation study for metal sliding surface. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohamad, Nazeera (2018) A new hybrid model of dengue incidence rate using negative binomial generalised additive model and fuzzy C means model a case study in Selangor. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohamad, Salasiah (2016) Potensi dan promosi pelancongan FITO di Taman Negara Johor Endau Rompin, Johor, Malaysia. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohamad Yazid, Nurulain Syuhada (2022) Optimization and characterization of ultrasonically treated jackfruit seed starch. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohamed, Mimi Nahariah Azwani (2015) Managing the complexities of English Language teaching in engineering. Doctoral thesis, University of Queensland.

Mohamed Bilema, Munder Abdullah (2021) Reclaimed asphalt pavement with waste frying oil and crumb rubber. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Mohamed Jofree, Ammar Fikree (2021) Faktor-faktor yang mempengaruhi ketidakcekapan teknik industri pembuatan elektrik dan elektronik di Malaysia. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohammed, Ali Ahmed (2022) Control and prediction of traffic crashes in the residential streets in Iraq using the expert system. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Mohammed Al-Alimi, Sami Abdo (2021) Modification and optimization of boron carbide and zirconia as reinforcement in hot equal channel angular processing solid state recycling AA6061 aluminium. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Mohammed Alerqi, Eman Saleh Ahmed (2020) Measuring the service quality factors of perspective international students to improve their satisfaction and loyalty towards University Tun Hussein Onn Malaysia (UTHM). Masters thesis, Universiti Tun Hussein Malaysia.

Mohammed Saif, Yazid Abdullsameea (2022) A smart vision inspection system on step-NC machine with IOT Environment. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Amdan, Nur Syahirah (2021) The effect of different concentration of composite coagulant on different arrangement of electrodes for hybrid composite coagulation and lector coagulation treatment of landfill leachate. Masters thesis, Universiti Tun Hussein Malaysia.

Mohd Ismail, Anis Zafirah (2022) Properties enhancement of electrodeposited-Cu2O-based homojunction thin film solar cell using etching treatment. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Jazid, Amirul Iman (2020) Kemiskinan berterusan dalam kalangan masyarakat miskin berdasarkan dimensi indeks pembangunan manusia (HDI). Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Nasim, Nur A’in (2021) Effect of salt stress on the physiological responses, phytochemicals and antioxidant activities of clitoria ternatea var. Pleniflora. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Noh, Ahmad Nahri (2021) Community capacity building towards a sustainable community based ecotourism development: a case study on Orang Asli Hulu (Jakun) In Kampung Selai, Bekok, Johor, Malaysia. Masters thesis, Universiti Tun Hussein Malaysia.

Mohd Nor, Farrah Husna (2022) Bioproduction of lipopeptides by dye decolourising bacteria and its roles in textile dye decolourisation. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Safian, Edie Ezwan (2009) Model klasifikasi bagi pejabat binaan khas di kawasan segi tiga emas Kuala Lumpur. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Said, Nor Damsyik (2002) Manual pengajaran berteraskan teknologi kejuruteraan. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Mohd Saim, Nur Amylia Izrin (2021) Risk of construction corruption factors in construction project life cycle from contractors’ perspectives. Masters thesis, Universiti Tun Hussein Malaysia.

Mohd Salleh, Siti Nor Aishah (2021) New composite coagulant from agro-waste (tapioca peel) and polyaluminium chloride for primary landfill leachate treatment. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Yassin, Nurain Izzati (2021) The performance of lightweight concrete brick containing expanded polystyrene and palm oil fuel ash. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Yunos, Muhammad Nur Annuar (2018) Development of distraction risk index (DRI) among the intrastate bus drivers in Kuala Lumpur Malaysia. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Zainuri, Mohamad Izwan Saifudin (2021) Study on kenaf powder reinforced cement materials for concrete 3d printing process. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohsin Alwan, Rafea (2021) Oppressed female protagonists and their survival strategies: An ecofeminist perspective in Toni Morrison’s The Bluest Eye and Alice Walker’s The Color Purple. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Mokhter, Normaisharah (2020) Assessment of bird diversity, feeding guild and avitourism potential in Pulau Tinggi Marine Park, Mersing, Johor, Malaysia. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Moussa Kaya, Khalil Abakar (2021) Human capital, foreign aid and poverty reduction strategy in Chad. Doctoral thesis, Universiti Tun Hussein Malaysia.

Muftah Shumani, Mohamed Mahmud (2019) Outage prediction modelling of terrestrial free space optics for tropical region. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Muhamad Zaini, Nurmahamira Zairani (2022) Causes of the tower crane accidents and safety performance practices at construction site in Malaysia: perspectives from tower crane operator. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Muhammad Ismail Jamali, Ali Raza Jamali (2018) Learning style preference and critical thinking perception among engineering students. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Muhammad Nda, Ramatu (2021) Extended unified theory of acceptance and use of technology: the influence of behavioral intention on big data management adoption by Malaysian public research universities. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Muhd Nor, Nik Hisyamudin (2021) To develop a new mineral carbonation process that have a high efficiency in CO2 absorption into industry slag using low energy mechanical milling. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Muhsin Al-Juhaishi, Lafta Flayih (2021) Effect of laminar and turbulent flow through a curved channel with a rectangle section by using baffles in cement industry. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Musa, Masitah (2022) Student acceptance towards online learning management system based on UTAUT2 model. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Musa, Yusuf (2021) Enhancing counterfeit tag detection for RFID system using slotted aloha. Masters thesis, Universiti Tun Hussein Malaysia.

Mustafa Al-Qaysi, Ali Abdulqader (2022) Enhancing the cooling system of a residential building using integrated building information modelling with solar absorption system. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mustaffa, Nor Azimah (2018) Magnesium doped calcium phosphate sodium alginate biocomposite for bone implant application. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mutia Syarifah, Sharfina (2020) Oil palm residue biodelignification by bacillus cereus ligninase from coptotermus curvignathus gut for handsheet production. Masters thesis, Universiti Tun Hussein Malaysia.

Naseeb Balmuralmansoori, Ahmed Hamad (2022) The effect of social media exposure towards fake news sharing behaviour in Abu Dhabi, UAE. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Nasrullah, Alsad (2021) Experimental study of fracture energy for foamed concrete. Masters thesis, Universiti Tun Hussein Malaysia.

Neo, Zhi Zing (2022) Polyphenol-mediated green synthesis of zinc oxide particles and their antibacterial properties: a novel size-controlled approach. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ng, Chun Keat (2021) Development of iot-based agility timer prototype and classification of agility. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ng, Wee Fern (2018) An assessment availability of physical facilities provision that support avaibility and accessibility for person with disabilities at Universiti Tun Hussein Onn Malaysia. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ng, Yin Hui (2020) Assessment of animal diversity in Pulau Tinggi, Mersing, Johor for conservation and indicator for potential wildlife tourism. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Nik Ahmad, Nik Sahidah (2022) Hybrid firely and particle swarm optimisation algorithm for optimal dimming level and energy saving in lecturer’s room. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Nikman Lee, Mohammad Syabilee (2021) The development of energy risk framework for retrofitting project. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Ning Ting, Josephine Ong (2022) Prediction of ammonia and iron concentrations in water based on complementary double split-ring resonator (DSRR). Masters thesis, Universiti Tun Hussein Onn Malaysia.

Noor Amran, Mohd Azlee (2022) Identification and modelling of two phase dc-dc boost converter based on autoregressive moving average with exogenous, output-error and transfer function model structures. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Nor Azlan, Nurul Nasuha (2021) Analysis of bus service based on the passenger demand using PTV Vissim: main campus of Universiti Tun Hussein Onn Malaysia, Parit Raja. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Nor Salim, Nor Adrian (2020) A study of water-mist recirculation system for filtration and cooling effect in the kitchen hood ventilation system. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Nordin, Rohayu (2016) Transformasi dan kejayaan komuniti orang asli Mah Meri Pulau Carey dalam bidang pelancongan. Doctoral thesis, Universiti Teknologi Malaysia.

Obayes, Noor Hatem (2021) New optimization feature for the developed open cnc controller based on ISO 6983 and ISO 14649. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Oon, Fok Yew (2021) The causal effects of baldrige excellence framework and lean in the Malaysian electrical and electronics manufacturing industry. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Othman, Khairulnizam (2022) Quantification and segmentation of breast cancer diagnosis: efficient hardware accelerator approach. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Pahazri, Nor Fadzilah (2018) A study on stryhcnos potatorum and pisum sativum as natural coagulants for meat food processing wastewater. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Paiman, Nuur Azreen (2014) Determination of baseline data on respirable dust concentration for safety and health enhancement in selected small and medium industries in Johor. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Pauzi, Aslia Natasha (2022) Discrimination of zingiberaceae medicinal herbs Using analytical methods combined with chemometric techniques. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Paya Martin, Marilyn (2022) Comparative sustainibilty evaluation on regenerated industrial nickel-cadmium battery based on life-cycle assessment method. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Raduan, Rasyidah (2021) Pemetaan risiko gempa bumi di Sabah menggunakan sistem maklumat geografi. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Rahimi, Muhammad Imran (2020) Vibration behaviour of pre-stressed precast hollow core floor with concrete topping thickness and boundary condition. Masters thesis, Universiti Tun Hussein Malaysia.

Ramli, Liza Suhana (2003) Penghasilan modul pembelajaran bahan kejuruteraan awam bagi kursus Ijazah Sarjana Muda Kejuruteraan Awam, Kolej Universiti Teknologi Tun Hussein Onn. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Rashed Mohammed Alneyadi, Rashed Hamad (2022) The development of a structural Model for adoption references of M-government services. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Razali, Maryanti (2022) Simulation of GPR system operation using dipole antenna and AFW envelope detector technique for underground object detection application. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Razali, Muhammad Faiz (2018) High pressure processing (HPP) of kelulut honey (Sarawak): enhancement on the quality and alteration of prebiotic potential on lactobacillu. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Risal, Noreen Nabilla (2022) Forecasting the ionospheric. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Riwayat, Akhtar Izzaty (2018) Identification of surface water and groundwater relationship at Universiti Tun Hussein Onn Malaysia (UTHM) Campus. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Rudi, Nurul Nadia (2022) Banana blossom peels adsorbent for the removal of manganese in water. Masters thesis, Universiti Tun Hussein Onn Malaysia.

S.M Johan, Siti Farhanah (2021) Accelerated consolidation of reconstituted dredged marine soils with drainage control. Doctoral thesis, Universiti Tun Hussein Malaysia.

Sabtu @ Othman, Hilyati (2021) A new service life prediction of reinforced concrete structures due to chloride-induced cover cracking with the confinement effect. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Sadli, Noorazah (2022) Kaedah pengajaran keusahawanan melalui penerapan ciri-ciri keusahawanan di kolej vokasional. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Saedudin, Rd. Rohmat (2020) A relative tolerance relation of rough set with reduct and core approach, and application to incomplete information systems. Doctoral thesis, Universiti Tun Hussein Malaysia.

Saeedmusallam Moqbil, Alrashdi Hamdan (2022) An integrated model of e-service quality and public satisfaction for smart city initiatives in the Abu Dhabi local government. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Saif Murshed Almeqbaali, Salem Rashed (2022) Evaluating a relationship of factors affecting users’ satisfaction with mobile government services of Abu Dhabi Police. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Salem Al Neyadi, Ali Hamad (2021) Close circuit television camera applications in Abu Dhabi United Arab Emirates: surveillance system effectiveness assessment. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Samsubaha, Muhammad Fauzi (2020) Acoustic excitation on flame properties caused by two sound sources. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Sarif, Nira Mawangi (2021) A discrete-time fast terminal sliding mode for depth control of autonomous underwater vehicle. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Seah, Shi Jie (2021) Rain attenuation characterization for 5G network in Peninsular Malaysia. Masters thesis, Universiti Tun Hussein Malaysia.

Shaari, Abdul Muin (2022) Energy management study in indoor farming plant factory. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Shaharuddin, Nurul Aimi (2020) Development of detection system of kidney and non-kidney images for different ultrasound machines. Masters thesis, Universiti Tun Hussein Malaysia.

Shaikh, Haseeb Halim (2021) Construction claims in the fast track mega infrastructure projects of Saudi Arabian Construction Industry. Masters thesis, Universiti Tun Hussein Malaysia.

Sharif, Hafiz Zafar (2021) Optimal design of net zero energy residential buildings in tropical climate. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Sharif, Mohd Zamri (2022) Kesan model APMI terhadap tahap kemahiran berfikir secara kritis dan penyelesaian masalah pelajar dalam kursus teknologi elektrik 1. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Sharqawi, Mushtaq Abdulrazzaq (2021) Gender based variation in employing suggestion strategies by Iraqi EFL learners. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Shuaib, Nasir (2021) Relationship of zooplankton and environmental parameter with emphasis on copepods at Pulau Tinggi, Johor, Malaysia. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Sivanganam, Lalithambigai (2002) Communication skills: what do employers' expect? (workplace communication skills for engineering graduates). Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Subramaniam, Kamalleswaran (2022) Prediction of an electrically turbocharged engine and performance prediction in an actual drive cycle. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Subramaniam, Nisamini (2022) Development framework of qlassic to improve defects identification in residential project. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Suhaini, Nurul Ashikin (2021) Investigation on construction waste management at precast concrete plants in Johor: case study. Masters thesis, Universiti Tun Hussein Malaysia.

Sulaiman, Nazrah Ilyana (2022) Unclad plastic optical fiber temperature sensor with a balloon-like structure. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Sulaiman, Shafiza Eliza (2018) Kaedah pengajaran yang diamalkan oleh tenaga pengajar di institut memandu. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Syed Nordin, Siti Zarida (2003) Kajian kesesuaian cd rom interaktif yang dibina bagi menghasilkan bahan pengajaran teknik dan vokasional. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Talib, Nihad Hasan (2020) Optimization of RFID network planning for monitoring railway mechanical defects based on gradient-based Cuckoo search algorithm. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Talib, Salleh (2021) A corpus-based lexical and grammatical error identification: L2 learners academic writing. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Tan, Kian Meng (2021) Identification of polystyrene degrading bacteria and potential enzyme action from zophobas morio for improvement and sustainable biodegradation of waste. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Tarique, Muhammad (2021) Relationship between significant construction safety parameters and on site safety performance of high rise building in Karachi, Sindh Province, Pakistan. Masters thesis, Universiti Tun Hussein Malaysia.

Teng, Howe Cheng (2020) Modelling of pandanus amaryllifolius plant-microbial fuel cell as low power generation source with energy yield enhancement. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Teo, Wei She (2022) Social return on investment (SROI) for “New Permanent Housing” (RKB) project in Kuala Krai, Kelantan. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Tham, Cheong Sheng (2022) People, process and system design of smart office solution. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Thana Singam, Rupashinii (2021) Effect of superhydrophobic coating on the mechanical properties and colourfastness of lawsonia inermis, azadirachta indica and curcuma longa dyed cotton fabrics. Masters thesis, Universiti Tun Hussein Malaysia.

Tiau, See Ping (2020) Prototype evaluation of a novel selective leverage gear system. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Tsai, Kai Len (2022) Web-based bim project execution plan management system (WeB-MaS) for public works department Malaysia. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Tuama, Alaa Nihad (2022) Thermally deposited silver-doped cuprous oxide solar cell on textured silicon and its devices modelling. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Tuan Mohd Yasin, Sharifah Nurulhuda (2017) Kerangka penambahbaikan pelaksanaan Program Diploma Kejuruteraan Mekatronik Politeknik di Malaysia. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Ullah, Arif (2021) An improved dynamic load balancing for virtualmachines in cloud computing using hybrid bat and bee colony algorithms. Doctoral thesis, Universiti Tun Hussein Malaysia.

Usman, Hamza (2021) Modelling of commercial property market segmentation to improve price prediction accuracy in Malaysia. Doctoral thesis, Universiti Tun Hussein Malaysia.

Ustadi, Muna Norkhairunnisak (2022) Halal supply chain: mediating role of intention on manufacturer’s behaviour to utilize halal transportation services. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Utomo, Hadi Prasetyo (2021) Modeling of substitution augmentation modification redefinition in academic information system education 3.0: a case study of sistem informasi akademik, Universitas Langlangbuana. Doctoral thesis, Universiti Tun Hussein Malaysia.

Wa Ays, Mohamed Mahad (2021) Economic feasibilty of solar powered street lighting system in Somalia. Masters thesis, Universiti Tun Hussein Malaysia.

Wai, Mars Hong Xuan (2020) Nondestructive investigation of soil moisture level using optical system. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Wan Azlan, Wan Norliyana (2022) Development of gesture-controlled robotic arm for upper limb hemiplegia therapy. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Wan Hassan, Wan Azrul Shafuan (2021) Pembangunan laman web solveme berkonsepkan pembelajaran berasaskan masalah bagi kursus asas pengaturcaraan di politeknik. Masters thesis, Universiti Tun Hussein Malaysia.

Wan Jamaludin, Wan Akashah (2021) Evaluation of a passive cooling system for embedded thermoelectric generator in concrete shingles for Renewable energy. Masters thesis, Universiti Tun Hussein Malaysia.

Wan Mahmud, Wan Mahzhir (2003) Penghasilan panduan keselamatan industri bagi kegunaan bakal graduan kejuruteraan elektrik politeknik. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Wan Marzuki, Wan Nur Ain Syukriah (2021) Effect of nitrogen fertilization and harvesting period on phytochemical content and antioxidant activity of cymbopogon citratus. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Wei May, Lim (2021) The development of online checklist system for traffic impact assessment (e.c-tia) report submission in Malaysia. Masters thesis, Universiti Tun Hussein Malaysia.

Yaacob, Afiqah (2022) Direct detection of low concentration uric acid in the visible light spectrum utilizing spectroscopy method. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Yahaya, Abdul Ahmed (2021) The effects of natural landscape elements in combating emerging desertification in Northern Nigeria. Doctoral thesis, Universiti Tun Hussein Malaysia.

Yahya, Mohd Shahir (2021) A contingency-based decision support instrument for selecting lean production tools and techniques. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Yeo, Kevin Jit Tong (2021) The stiffness and strength degradation of timber concrete composite slab deck under repeated loading. Masters thesis, Universiti Tun Hussein Malaysia.

Yeo, Shi Wei (2018) Physical and chemical properties of artificial soil with humified and non-humified organic matters. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Yusuf, Nur Kamilah (2017) Effects of hot press forging parameter and life cycle assessment in direct recycling of AA6061 aluminium. Doctoral thesis, UTHM.

Zahari, Fatin Nur Atikah (2022) Assessment on different animal preservation techniques based on systematic decision tree for the development of natural history gallery in Pulau Tinggi Malaysia. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Zainal, Zaffan Farhana (2018) Identification of hazardous road location based on design consistency and accident prediction model federal road in Johor. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Zainal Abidin, Ahmad Noor Ariff (2015) Non-invasive early diagnosis of deep vein thrombosis. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Zaman, Gohar (2021) An ontological framework for information extraction using fuzzy rule-based system and word sense disambiguation. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Zulkefli, Aina Syazwana (2021) Effect of operating parameter on membrane distillation performance using kapok fibre for humic acid treatment. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Zulkefli, Zainordin Firdaus (2004) Penghasilan dan penilaian modul cd pembelajaran kejuruteraan awam tingkatan 4. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Zulqarnain, Muhammad (2020) An enhanced gated recurrent unit with auto-encoder for solving text classification problems. Doctoral thesis, Universiti Tun Hussein Malaysia.

Other

Abd Latif, Siti Nadirah and Omar, Nurul Aswa (2021) Sistem pengurusan Pusat Latihan Memandu Spim Hi Tech. Penerbit UTHM, UTHM.

Ahmad Riduan, Nuraqilah Haidah and Mohd Foozy, Cik Feresa and A. Hamid, Isredza Rahmi Binti and Shamala, Palaniappan and Othman, Nur Fadzilah (2021) Data wiping tool: ByteEditor Technique. IEEE.

Che Mohd Zainudin, Wan Azra Balqis and Saringat, Mohd Zainuri (2021) Sistem pengurusan syukor batik menggunakan aplikasi mudah alih. Penerbit UTHM, UTHM.

Ismail, Lisa Mariam Syawal and Zakariah, Siti Hajar and Tukiran, Nor Anis Intan Aqiah and Md Sahak, Adibah Aishah and Husin, Ainina Mastura (2021) Food handler’s perception on food handling course. Penerbit UTHM, UTHM.

Lim Jun Jie, Nicholas and Mohamad Sukri, Khairul Amin (2021) Personal home network intrusion checking tool (PacAN). Penerbit UTHM, UTHM.

Mohamad, Ahmad Syukrie and Afif, Zehan Afizah and Abdul Hamid, Norhamreeza (2021) Sistem pengambilan tanah (perbicaraan) land acquisition system (trial). Penerbit UTHM, UTHM.

Mohd Adzaharee, Muhammad Sallehuddin and Ahmad, Afandi and Mohd Nadzri, Muhammad Muzakkir (2021) IoT-Based Reverse Vending Machine (RVM) for recycle station. Penerbit UTHM, UTHM.

Razali, Nur Amirah Ilyana and Bareduan, Salleh Ahmad (2021) Arena simulation training guide for simple call center. Penerbit UTHM, UTHM.

Sukarno, Siti Nurzulaika and Saringat, Mohd Zainuri and Mustapha, Aida and Razali, Nazim (2021) Comparative study of football team rating system using elo rating and pi-rating for Switzerland Super League. Penerbit UTHM, UTHM.

Sulaiman, Amelia and Salamat, Mohamad Aizi (2021) Sistem e-PnP Fakulti Teknologi Kejuruteraan (FTK), UTHM. Penerbit UTHM, UTHM.

Zanalabidin, Nur Ain Shahira and Abd Aziz, Ruhaya (2021) Sistem pengurusan maklumat Ko-kurikulum SK To’ Uban. Penerbit UTHM, UTHM.

This list was generated on Sun Jul 30 13:00:13 2023 +08.

Export as	Atom RSS 1.0 RSS 2.0