Items where Subject is "T Technology > TA Engineering (General). Civil engineering (General) > TA349-359 Mechanics of engineering. Applied mechanics"

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Creators | Item Type
Jump to: A | B | G | H | I | J | K | M | N | O | R | S | T | W | Y | Z
Number of items at this level: 58.

A

Abdul Rahim, Suraya and Tengku Ibrahim, Tengku Nadzlin and Ma’Radzi, Ahmad Alabqari and Abdul Jamil , Muhammad Mahadi (2013) Design and development of oblique groove micromixer for laminar blood reagent mixing. IEEE International Conference on Control System, Computing and Engineering . pp. 547-550.

Abdul Rahim, Suraya (2013) Design and development of groove micromixer for laminar blood-reagent mixing. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdul Rahman, Abdul Halim (2015) CFD simulation of vortex-induced vibration of a bluff body structure by ANSYS fluent. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Aman, Fazlina (2013) Beberapa masalah aliran lapisan sempadan olakan dengan kesan gelinciran dan tanpa gelinciran pada permukaan. PhD thesis, Fakulti Sains dan Teknologi.

B

Balachandar, Vibhu Vignesh and Hasan, Sulaiman and Kandasamy, Ramasamy and Ashwinkumar, Ashwinkumar (2015) Thermal response of convective boundary layer stagnation flow of nanofluid over shrinking surface influencing suction and variable stream conditions. In: International Engineering Research and Innovation Symposium 2015 (IRIS), 12–13 September 2015, Putrajaya, Malaysia.

G

Ghazali, Mohd Hafiz (2015) New design of tuned vibration absorber for wide frequency range application. Masters thesis, Universiti Tun Hussein Onn Malaysia.

H

Hassan, Suhaimi and Abd Rahim, Erween and Mohid, Zazuli and Warap, N. M. (2014) Dynamic analysis of micro-milling machine. Applied Mechanics and Materials , 465 . pp. 699-703. ISSN 1660-9336

I

Idris, Maizlinda Izwana and Md. Ehsan, I. I. and Mohamed, S. H. (2013) Effect of organic space holder in fabrication of clocedcell aluminium foam. In: Advanced Materials Engineering and Technology (ICAMET 2013) , 28-29 November 2013, Bandung, Indonesia .

Idris, Mohd Azli (2015) Vibration simulation of a simply-supported beam with attached multiple absorbers. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ismail, Al Emran (2013) Development of J-integral prediction model for surface cracks in round bars under combined loadings. Applied Mechanics and Materials , 315 . pp. 665-669. ISSN 1662-748

Ismail, Al Emran (2014) Mode I stress intensity factors for slanted cracks in round bars. International Review of Mechanical Engineering, 8 (3). ISSN 1970-8734

Ismail, Al Emran and Ariffin, A. K. and Abdullah, S. and Ghazali, M. J. (2014) J-integral evaluation of surface cracks in round bar under Mode III loadings. Research Journal of Applied Sciences, Engineering and Technology, 7 (10). pp. 1985-1993. ISSN 2040-7467

Ismail, Al Emran and Ariffin, Ahmad Kamal and Ghazali, Mariyam Jameelah (2014) Ungkapan kamiran-J retak permukaan pada bar silinder padu kenaan beban ragam I. Jurnal Teknologi, 68 (1). pp. 7-17. ISSN 2180-3722

J

Jaini, Norhaslina (2014) Vibration analysis of a beam structure attached with two dynamic vibration absorbers. Masters thesis, Universiti Tun Hussein Onn Malaysia.

K

Kamardan, Muhamad Ghazali (2014) A mathematical model development for the quasi-static lateral collapse of the generalised geometric hollow shapes. PhD thesis, Universiti Pertahanan Nasional Malaysia.

Khalid, Amir and Andsaler, Adiba Rhaodah and Jaat, Norrizam (2015) Effect of high pressure on the flow characteristics of injector using computational fluid dynamics (CFD). In: International Engineering Research and Innovation Symposium 2015 (IRIS), 12–13 September 2015, Putrajaya, Malaysia.

M

Mahzan@Mohd Zin, Shahruddin and Azmi, Mohd Azham and Taib, Hariati and Mohammad, Nurul Emi Ain (2014) Vibration exposure analysis of the polysiloxane reinforced with rice husk silica. Applied Mechanics and Materials, 660 . pp. 531-535. ISSN 1662-7482

Manshoor, Bukhari and Md Saufi, Muhammad Faiq and Khalid, Amir and Izzuddin, Zaman (2014) CFD analysis of industrial multi-stage impeller in stirred tank with fractal pattern baffled and impeller. In: International Integrated Engineering Summit (IIES 2014), 1-4 December 2014, Universiti Tun Hussein Onn Malaysia, Johor.

Manshoor, Bukhari and Rosidee, N. F. and Amir, Khalid (2013) An effect of fractal flow conditioner thickness on turbulent swirling flow. Applied Mechanics and Materials , 315 (2013). pp. 93-97. ISSN 1660-9336

Manshoor, Bukhari and Yusof, Afifah and Suraya Laily, Suraya Laily and Zaman @ Bujang, Izzuddin and Khalid, Amir (2014) An effect of fractal baffles and impellers with double stage 4-blade rushton turbine to fluid flow behaviour in stirred tank. Applied Mechanics and Materials, 660 . pp. 816-822. ISSN 1662-7482

Manshoor, Bukhari and Zaman, Izzuddin and Othman, M. F. and Khalid , Amir (2013) Experimental study of circle grid fractal pattern on turbulent intensity in pipe now. In: International Conference on Mechanical Engineering Research (ICMER2013), 1-3 July 2013, Kuantan, Pahang.

Mat Ali, Asrudin (2003) Pembangunan prototaip modul pengajaran dan pembelajaran berbantu komputer bagi mata pelajaran Mekanik pepejal (tegasan dan terikan). Masters thesis, Fakulti Teknologi Kejuruteraan.

Mat Jusoh, Noor Aslamiah (2015) Finite element analysis of a beam structure attached with tuned vibration absorbers. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Md Hasan, Sazali (2015) Cfd simulation of the dynamic flow behavior in a bubble column reactor. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Md Salleh, Salihatun and Abd. Rahim , Erween and Ghazali, Imran and Azmi, Khairull and Jelani, Abdul Razak and Ismail, Mohd Fauzi and Ahmad, Mohd Rizal (2013) Hand-arm vibration analysis of palm oil fruit harvester machine. Applied Mechanics and Materials, 315 . pp. 621-625. ISSN 1662-7482

Mohamad, Mahmod Abd Hakim and Abd Aziz, Azizul Rahman and Mohamed Nor, Mohd Hadri and Basuno, Bambang (2013) A third-order shock capturing scheme for inviscid flows. In: Prosiding Seminar Kebangsaan Aplikasi Sains dan Matematik 2013 (SKASM 2013) , 29-30 Oktober 2013, Batu Pahat, Johor . (Unpublished)

Mohamad, Mahmod Abd Hakim and Basri, S. and Basuno, Bambang (2011) One-dimensional high-order compact method for solving Euler’s equations. In: 4th International Meeting on Advances in Thermofluids, 3rd-4th October 2011 , Melaka. (Submitted)

Mohamed Salleh, Mohammad (2016) Vibration control of thin plate structure with attached dynamic vibration absorbers. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohammad, Nurul Emi Nor Ain (2014) Comparative study on vibration performance and mechanical properties between natural and synthetic silica based polysiloxane. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohammed Alakashi, Abobaker and Salleh, Hamidon and Basuno, Bambang (2013) The implementation of cell-centred finite volume method over five nozzle models. In: 3rd International Conference on Advanced in Mechanical Engineering (ICAME2013) , 27-29 August 2013, Melaka, Malaysia .

Mohd Noh, Mohd Firdaus (2015) Vibroacoustic modelling of enclosure coupled to a flexible wall with attached spring-mass-damper system. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Noor, Nazihah (2015) Analysis of vortex shedding in a various body shapes. Masters thesis, Universiti Tun Hussein Onn Malaysia.

N

Nalathambi, Deenesh Kumar (2014) Air flow profile evaluation around moving vehicle. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ngali, Mohd Zamani and Zakaria, Nazri Huzaimi and Osman, Kahar and Khalid, Amir and Manshoor, Bukhari and Zaman @ Bujang, Izzuddin (2014) Gravitational effect formulation on in-house air-particle flow solver. Applied Mechanics and Materials, 660 . pp. 699-703. ISSN 1662-7482

O

Othman, Mohd Fahmi and Manshoor, Bukhari and Khalid , Amir (2013) Circle grid fractal plate as a turbulent generator for premixed flame: an overview. In: International Conference on Mechanical Engineering Research (ICMER2013), 1-3 July 2013, Kuantan, Pahang.

Othman , Safiah (2005) A numerical study of transient natural convection of water near its density extremum. Masters thesis, University of Strathclyde.

R

Rahamat, Lily Afizah (2015) Effect of double stratification on boundary layer flow and heat of nanofluid over a vertical plate in the presence of chemical reaction. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Razali, Mohd Azahari and Mori, Masayuki and Suzuki, Masataro and Masuda, Wataru (2012) Effects of gas species on pressure dependence of thermophoretic velocity. Journal of Aerosol Science, 54 . ISSN 0021-8502

Roslan, Rozaini and Saleh, H. and Hashim, I. and Bataineh, A.S. (2013) Natural convection in an enclosure containing a sinusoidally heated cylindrical source. International Journal of Heat and Mass Transfer, 70 . pp. 119-127. ISSN 00179310

S

Sadikin, Azmahani and Md Noor, Md Iskandar and Mat Isa, Norasikin and Basharie, Siti Mariam and Khalid, Amir (2014) Pressure distribution around mixing blades in biodiesel reactor using computational fluid dynamics (GFD). Applied Mechanics and Materials , 554 . pp. 381-385. ISSN 1660-9336

Salleh, Mariam (2013) Comparison of rhombic type micromixer to improve mixing efficiency in biomems application. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Salleh, Muhammad Mohamed and Zaman @ Bujang, Izzuddin (2015) Modification of vibrating thin walled structure using dynamic vibration absorber. In: International Engineering Research and Innovation Symposium 2015 (IRIS), 12–13 September 2015, Putrajaya, Malaysia.

Shahrul Azmir, Osman and Azwadi, C. S. N. and Izual, N. I. N. (2010) Numerical investigation of fluid and thermal flow in a differentially heated side enclosure walls at various inclination angles. In: EMESEG'10: Proceedings of the 3rd WSEAS International Conference on Engineering Mechanics, Structures, Engineering Geology.

Siswanto, Waluyo Adi and Darmawan, Agung Setyo (2012) Teaching finite element method of structural line elements assisted by open source freeMat. Research Journal of Applied Sciences, Engineering and Technology, 4 (10). pp. 1277-1286. ISSN 2040-7467

Soo , Poey Lam (2012) Analysis of the flow characteristic inside a heated and unheated horizontal rifled tube. Masters thesis, Universiti Tun Hussein Onn Malaysia.

T

Tuan Chik, Tuan Norhayati and Ahyer, Muhammad Zarrin and Yusoff, Nor Azizi and Illias, Mohd. Ezwan and Wan Ibrahim, Mohd Haziman and Ghazali, Mohd Imran (2014) Vibration response on MiNT-SRC building due to ground borne vibrations from humans using finite element modeling. Applied Mechanics and Materials, 660 . pp. 536-540. ISSN 1662-7482

Tuan Chik, Tuan Norhayati and Yabi, Shurl and Wan Ibrahim, Mohd Haziman and Yusoff, Nor Azizi and A Majid, Taksiah and Alexius, Rachel Asiew (2015) Influence of people walking on floor performance due to low level vibration. In: AWAM International Conference on Civil Engineering 2015 (eco-AICCE 2015), 9-11 September 2015, Kuala Lumpur, Malaysia.

Tumiran, Mohamad Taufik (2015) Analysis on vibration monitoring at mrt infrastructure construction site. Masters thesis, Universiti Tun Hussein Onn Malaysia.

W

Wan Salim, Wan Saiful-Islam and Raghavan, Vijay R. Numerical simulation of high sub-critical reynolds number flow past a circular cylinder. In: Proceeding of International Conference BAIL 2006 Boundary and Interior Layers, 24-28 July 2006, Gottingen, Germany.

Y

Yang Ghazali, Zalika (2014) Feasibility study of polysiloxane filled silica as a heat insulator application. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Yusop, Fatimah and Basuno, Bambang and Omar, Zamri (2013) Application of total variation diminishing for 1D nozzle problem. In: 3rd International Conference on Advanced in Mechanical Engineering (ICAME2013) , 27-29 August 2013, Melaka, Malaysia .

Z

Zainulabidin, Mohd Hafeez and Jaini, N. (2013) Vibration analysis of a beam structure attached wlth a dynamic vibration absorber. Applied Mechanics and Materials , 315 . pp. 315-319. ISSN 1660-7482

Zakaria, Nazri Huzaimi and Ngali, Mohd Zamani and Rivai, Ahmad (2014) Review on fluid structure interaction solution method for biomechanical application. Applied Mechanics and Materials, 660 . pp. 927-931. ISSN 1662-7482

Zaman, Izzuddin and Khalid , Amir and Manshoor, Bukhari and Araby, Sherif and Ghazali, Mohd Imran (2013) The effects of bolted joints on dynamic response of structures. IOP Conf. Series: Materials Science and Engineering, 50 . 012018. ISSN 1757-8981

Zaman, Izzuddin and Manshoor, Bukhari and Khalid , Amir and Araby, Sherif and Ghazali, Mohd Imran (2013) Vibration characteristics of composite plate embedded with shape memory alloy at elevated temperature. Applied Mechanics and Materials , 393 . pp. 655-660. ISSN 1660-9336

Zaman, Izzuddin and Hasnan, Khalid and Rahman, Roslan Abdul (2007) Dynamic analysis on off-road vehicle chassis using 3-d finite element model. Journal of Science and Technology, 4 (1). pp. 1-16. ISSN 1823-2698

Zaman @ Bujang, Izzuddin and Ali, Yaacub Zaki and Nasoha, Mahyan (2012) Vibration control of structure using multiple passive vibration absorbers. Other thesis, Universiti Tun Hussein Onn Malaysia.

Zulkarnain, Maizul Haffin (2013) Design and simulation study of obstacle based passive micromixer. Masters thesis, Universiti Tun Hussein Onn Malaysia.

This list was generated on Sat May 27 23:52:53 2017 MYT.