Items where Subject is "T Technology > TA Engineering (General). Civil engineering (General) > TA401-492 Materials of engineering and construction. Mechanics of materials"

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Creators | Item Type
Jump to: | A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | W | Y | Z
Number of items at this level: 387.

Ho, Meei-Hoan and Ahmad , Tarmizi and Chan, Chee-Ming and Ismail , Bakar (2010) Leachability and strength of kaolin stabilized with cement and rubber. International Journal of Sustainable Construction, 2 (1). pp. 1-16. ISSN 2180-3242

Mohamed Hatta, Mohamed Nasrul and Sani, Azlis and Nakazuru, Makoto and Nagata, Kenji and Takahashi, Kiyohisa (2007) Dynamic and mechanical properties of palm Fiber/pla biodegradable composites. In: World Engineering Congress 2007, 5-9 August 2007, Penang, Malaysia.

A

A Zamhari, Kemas and Hermadi, Madi and Choy Fun, Wai (2009) Characteristics of rejuvenated bitumen with used lubricating oil as rejuvenating agent. In: International Conference on Sustainable Infrastructure and Built Environment in Developing Countries, 2-3 November 2009, Bandung, West Java, Indonesia.

A. Faisal , Alshalif and Juki, Mohd Irwan and Othman, Norzila and Luis Hii, Anneza (2015) Isolation of sulphate reduction bacteria (SRB) to improve compress strength and water penetration of bio-concrete. In: IConCEES 2015, 01-02 December 2015, Melaka, Malaysia.

A. G., Mohd Khairul Zaimy and Mohd Rus, Anika Zafiah and Ab Latif, Najibah and S., Nurulsaidatulsyida (2013) Mechanical and thermal properties of waste bio-polymer compound by hot compression moulding technique. In: International Conference on Mechanical Engineering Research (ICMER2013), 1-3 July 2013, Kuantan, Pahang.

A. Khalid, Nur Hafizah and Hussin, Mohd W. and Mirza, Jahangir and Ariffin, Nur Farhayu and Ismail, Mohamed A. and Lee, Han-Seung and Mohamed, Azman and Putra Jaya, Ramadhansyah (2016) Palm oil fuel ash as potential green micro-filler in polymer concrete. Construction and Building Material, 102 . pp. 950-960. ISSN 0950-0618

Abd Ghani, Mohd Khairul Zaimy (2016) Relationship of moulding pressure and weight of granulate in improving the mechanical and characteristics of biopolymer from renewable resources. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abd Rahman, Hamimah and Muchtar, Andanastuti and Muhamad, Norhamidi and Abdullah, Huda (2010) Electrophoretic deposition of La0.6Sr0.4Co0.2Fe0.8O3-TM cathode film on stainless steel substrates. Advanced Materials Research, 139-14 . pp. 145-148. ISSN 1022-6680

Abd Rahman, Hamimah and Muchtar, Andanastuti and Muhamad, Norhamidi and Abdullah, Huda (2013) La0.6Sr0.4Co0.2Fe0.8O3−δ–SDC carbonate composite cathodes for low-temperature solid oxide fuel cells. Materials Chemistry and Physics, 141 (2-3). pp. 752-757. ISSN 0254-0584

Abd Rahman, Norashidah and Mohd Jaini, Zainorizuan (2014) An experimental study on the fracture energy of foamed concrete using v-notched beams. In: InCIEC 2014 International Civil and Infrastructure Engineering Conference, 28 September - 1 October 2014, Kota Kinabalu, Sabah, Malaysia.

Abd Shaib, Mohd Fadzli and Mohamad, Elmy Johana and Abdul Rahim, Ruzairi and Abd Jamil, Mahadi and Leow, Pei Ling (2011) An overview: effectiveness of different arrangement for electrode guard in electrical capacitance tomography. Sensors & Transducers Journal, 135 (12). pp. 20-26. ISSN 1726- 5479

Abdul Hamid, Noor Azlina (2005) The use of horizontal and inclined bars as shear reinforcement. Masters thesis, Universiti Teknologi Malaysia.

Abdul Hamid, Noor Azlina and Thamrin, Rendy and Ibrahim, Azmi (2013) Shear capacity of non-metallic (FRP) reinforced concrete beams with stirrups. In: 2nd International Conference on Civil Engineering and Materials (ICCEM 2013), 6-7 July 2013, Hong Kong, China.

Abdul Haq, Reazul Haq and Wahab, Md Saidin and Mat Uzir , Wahit (2013) Improvement of mechanical properties of polycaprolactone (PCL) by addition of nano-montmorillonite (MMT) and hydroxyapatite (HA). Applied Mechanics and Materials , 315 (1). pp. 815-819. ISSN 1660-7482

Abdul Haq, Reazul Haq and Wahab, Md Saidin and Wahit, Mat Uzir (2013) Impact test and bioactivity properties of polycaprolactone (PCL) by addition of nano-montmorillonite (MMT) and hydroxyapatite (HA). In: 2013 Asia Conference on Mechanical and Materials Engineering (ACMME), 8-9 October 2013, Wuhan, China.

Abdul Kadir, Aeslina (2015) The utilization of coffee waste into fired clay brick. In: Advanced Research in Material Sciences, Manufacturing, Mechanical and Mechatronic Engineering Technology International Conference (AR4MET 2015), 2-4 June 2015, Bali, Indonesia.

Abdul Kadir, Aeslina and Abdul Rahim, Ahmad Shayuti and Hassan, Mohd Ikhmal Hakeem (2015) Utilization of polishing sludge (PS) and body mill sludge (BS) incorporated into fired clay brick. ARPN Journal of Engineering and Applied Sciences, 10 (15). ISSN 1819-6608

Abdul Kadir, Aeslina and Hassan, Mohd Ikhmal Hakeem (2013) An overview of fly ash and bottom ash replacement in self compaction concrete. In: Advanced Materials Engineering and Technology (ICAMET 2013) , 28-29 November 2013, Bandung, Indonesia .

Abdul Kadir, Aeslina and Hassan, Mohd Ikhmal Hakeem and Abdullah, Mohd Mustafa Al Bakri (2016) Investigation on leaching behaviour of fly ash and bottom ash replacement in self-compacting concrete. In: International Conference on Innovative Research 2016 - ICIR Euroinvent 2016, 19th-20th May 2016, Iasi, Romania.

Abdul Kadir, Aeslina and Hassan, Mohd Ikhmal Haqeem and Jamaluddin, Norwati and Abdullah, Mohd Mustafa Al Bakri (2016) Properties and leachability of self-compacting concrete incorporated with fly ash and bottom ash. In: International Conference on Innovative Research 2016 - ICIR Euroinvent 2016, 19th-20th May 2016, Iasi, Romania.

Abdul Kadir, Aeslina and Jamil, H. H. and Abdul Rahim, A. S. (2014) Leachability of fired clay brick incorporating with sludge waste from mosaic industry. Materials Science Forum, 803 . pp. 233-238. ISSN 978303835

Abdul Kadir, Aeslina and Mohajerani, Abbas (2013) Physical and mechanical properties of fired clay bricks incorporated with cigarette butts: comparison between slow and fast heating rates. Applied Mechanics and Materials , 421 . pp. 201-204. ISSN 1660-9336

Abdul Kadir, Aeslina and Shahidan, Shahiron and Lau , Hai Yee and Hassan, Mohd Ikhmal Haqeem and Abdullah, Mohd Mustafa Al Bakri (2016) The effect on slurry water as a fresh water replacement in concrete properties. In: International Conference on Innovative Research 2016 - ICIR Euroinvent 2016, 19th-20th May 2016, Iasi, Romania.

Abdul Kadir, Aeslina and Abdul Rahim, Ahmad Shayuti and Hassan, Mohd Ikhmal Haqeem and Abdullah, Mohd Mustafa Al Bakri (2016) Physical and mechanical properties of bodymill sludge (BS) incorporated into fired clay brick. In: International Conference on Innovative Research 2016 - ICIR Euroinvent 2016, 19th-20th May 2016, Iasi, Romania.

Abdul Latif, Noradila (2015) Effect of strain rates on tensile properties and fracture toughness determination of extruded Mg-Al-Zn alloys. PhD thesis, Universiti Kebangsaan Malaysia.

Abdul Rahim, Ahmad Shayuti (2016) Properties and environmental impact from mosaic sludge industry incorporated into fired clay bricks. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdul Rahim, Erween and Mohid, Zazuli and Hamzah, M.R. and Yusuf, A.F. and Rahman, N.A. (2014) Performance of tools design when helical milling on carbon fiber reinforced plastics (CFRP) aluminum (Al) stack. Applied Mechanics and Materials , 465 . pp. 1075-1079. ISSN 1660-7482

Abdul Rahim, Mustaqqim and Md Ghazali, Zuhayr and Santiago, Ragunathan and Shahidan, Shahiron (2013) The behaviours of steel fiber as main reinfocement in high performance slurry infiltrated fiber reinforced concrete. In: Advanced Materials Engineering and Technology (ICAMET 2013) , 28-29 November 2013, Bandung, Indonesia .

Abdul Rahim, Mustaqqim and Shahidan, Shahiron and Nik Zol, Nik Suharliza (2014) Properties of steel fiber reinforcement concrete with different characteristic of steel fiber. In: International Integrated Engineering Summit (IIES 2014), 1-4 December 2014, Universiti Tun Hussein Onn Malaysia, Johor.

Abdul Rahman, Ismail and Adnan, Suraya Hani and Soejoso, Mia Wimala and Ahmad Zaidi, Ahmad Mujahid (2011) Water permeability of recycled aggregate concrete containing new pozzolan micronised biomass silica material. Project Report. Universiti Tun Hussein Onn Malaysia. (Unpublished)

Abdul Rashid, Azrin Hani and MS, Hashim and Lim, TY and M., Mariatti and R, Ahmad (2015) Impact behaviour of woven coir-epoxy composite: effects of woven density and woven fabric treatment. Journal of Materials - Design and Applications . pp. 1-12. ISSN 2041-3076

Abdul Rashid, Azrin Hani (2015) Low velocity impact response of laminated textile coir-aramids/epoxy hybrid composites subjected to transverse penetration loading. PhD thesis, Universiti Sains Malaysia.

Abdul Samad, Abdul Aziz and Jayaprakash, J. (2013) Development of a compatability model for the shear strengthening of reinforced concrete continuous beams using externally bonded bi-directional CFRP strips. Other thesis, Universiti Tun Hussein Onn Malaysia.

Abdul Samad, Abdul Aziz and Jayaprakash, J. (2009) Shear transfer mechanism of reinforced concrete push-off specimen using externally bonded fibre reinforced polymer (FRP) composites. Other thesis, Universiti Tun Hussein Onn Malaysia.

Abdul Samad, Abdul Aziz and Mohamad, Noridah and Hadipramana, Josef and Amiruddin, Mohamad Razi Ashaari (2016) Comparative study on theoretical models and design codes for the shear contribution of NSM FRP bars in RC beams. Jurnal Teknologi (Sciences & Engineering), 78 (5). pp. 115-119. ISSN 21803722

Abdul Samad, Abdul Aziz and Ali, Noorwirdawati and Mohamad, Noridah and Hadipramana, Josef and Mohd Bosro, Mohamad Zulkhairi (2016) Theoretical model contribution of CFRP laminates on shear strengthening and repair of RC beams. Jurnal Teknologi (Sciences & Engineering), 78 (5). pp. 79-83. ISSN 21803722

Abdulaziz Al-Shalif, Abdullah Faisal (2016) The used of ureolytic and sulphate reduction bacteria to improve properties and self-healing of concrete. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdullah, Hasan Zuhudi and Koshy, P. and Sorrell, C. C. (2013) Anodic oxidation of titanium in mixture of β-Glycerophosphate (β-GP) and Calcium Acetate (CA). In: Advanced Materials Engineering and Technology (ICAMET 2013) , 28-29 November 2013, Bandung, Indonesia .

Abdullah, Hasan Zuhudi and Lee, Te Chuan and Idris, Maizlinda Izwana and Charles, Christopher Sorrell (2014) Effect of current density on anodised titanium in mixture of pglycerophosphate (P-GP) and calcium acetate (CA). In: International Conference on X-Ray & Related Technique in Research and Industry (ICXRI2014), 11-13 August 2014 , Johor Bahru, Johor.

Abdullah, Mohd Ezree (2014) Performance of warm mix asphalt (WMA) mixture using nanoclay modified asphalt binder. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Abdullah, Mohd Ezree and Ahmad Zamhari, Kemas and Buhari, Rosnawati and Abu Bakar, Siti Khatijah and Mohd Kamaruddin, Nurul Hidayah and Nayan, Nafarizal and Hainin, Mohd Rosli and Abdul Hassan, Norhidayah and Hassan, Sitti Asmah and Md. Yusoff, Nur Izzi (2014) Warm mix asphalt technology: a review. Jurnal Teknologi, 71 (3). pp. 39-52. ISSN 2180-3722

Abu Bakar, B. H. and Wan Ibrahim, Mohd Haziman and Megat Johari, M. A. (2011) A review: durability of fired clay brick masonry wall due to salt attack. International Journal of Integrated Engineering, 1 (2). pp. 111-127. ISSN 1985-854X

Adnan, Suraya Hani and Rahman, Ismail and Mohd Saman, Hamidah (2014) Enhancement performance of recycled aggregate concrete by using micronized biomass silica. In: InCIEC 2014 International Civil and Infrastructure Engineering Conference, 28 September – 1 October 2014, Kota Kinabalu, Sabah, Malaysia.

Adnan, Suraya Hani and Wan Ibrahim, Mohd Haziman and Jamaluddin, Norwati and Zakaria, Nurul Hazarine (2015) Performance of recycled aggregate containing POFA as additives for cement. In: AWAM International Conference on Civil Engineering 2015 (eco-AICCE 2015), 9-11 September 2015, Kuala Lumpur, Malaysia.

Adnan, Suraya Hani (2013) Performance of recycled aggregate concrete containing palm oil fuel ash. Other thesis, Universiti Tun Hussein Onn Malaysia.

Adnan, Suraya Hani and Abdul Rahman, Ismail and Lee, Yee Loon and Yusof , Hanita (2011) Compressive strength and water permeability performance of micronised biomass silica concrete. International Journal of Integrated Engineering, 1 (2). pp. 103-109. ISSN 1985-854X

Adnan, Suraya Hani and Lee , Yee Loon and Abdul Rahman, Ismail and Mohd Saman, Hamidah and Soejoso, Mia Wimala (2007) Compressive strength of recycled aggregate concrete with various percentage of recycled aggregate. In: National Seminar on Civil Engineering Research (SEPKA 2007), 11-12 December 2007, Universiti Teknologi Malaysia, Skudai.

Adnan, Suraya Hani and Lee , Yee Loon and Abdul Rahman , Ismail and Mohd Saman, Hamidah and Soejoso, Mia Wimala (2008) Water permeability of micronised biomass silica concrete. In: International Graduate on Engineering and Science (IGCES'08), 23-24 December, 2008, Universiti Teknologi Malaysia, Sekudai, Johor.

Agam, Mohd Arif (2006) An investigation of physical processes in nanosphere lithography. PhD thesis, University of Birmingham.

Ahmad, Hilton@Mohd Hilton (2013) Physically based finite element strength prediction in notched woven laminates under quasi-static loading. Plastics, Rubber and Composites, 42 (3). pp. 93-100. ISSN 1743-2898

Ahmad, Hilton@Mohd Hilton (2014) Strength prediction in CFRP woven laminate bolted double-lap joints under quasi-static loading using XFEM. Composites Part A: Applied Science and Manufacturing, 56 (-). pp. 192-202. ISSN 1359-835X

Ahmad, Hilton@Mohd Hilton and Crocombe, A. D. and Smith, P. A. (2013) Physically based finite element strength prediction in notched woven laminates under quasi-static loading. Plastics, Rubber and Composites, 42 (3). pp. 93-100.

Ahmad, Hilton@Mohd Hilton and Mohd , Sofian and Mohd Noor, Nurazuwa (2007) Mechanical properties of palm oil clinker concrete. In: 1st Engineering Conference on Energy and Environment, 27-28 December 2007, Kuching, Sarawak.

Ahmad, Hilton@Mohd Hilton and Mohd Noor, Nurazuwa (2007) Physical properties of local palm oil clinker and fly ash. In: 1st Engineering Conference on Energy and Environment, 27-28 December 2007, Kuching, Sarawak.

Ahmad, Mohd Hilton (2014) Strength prediction of double-lap woven CFRP bolted joint incorporating material softening. Applied Mechanics and Materials , 541 . pp. 234-238. ISSN 1660-7482

Ahmad, Mohd Hilton (2014) Stress distribution in composite double-lap bolted joints incorporating with clamp-up. Applied Mechanics and Materials, 660 . pp. 152-156. ISSN 1662-7482

Ahmad, Mohd Hilton (2015) Stress distribution of bolted joints with different lay-up types. In: International Conference on Mechanical Engineering Research (ICMER), 18-19 August 2015, Kuantan, Pahang.

Ahmad, Mohd Hilton and Abed, Mustafa Abbas (2015) Strength prediction of double-lap bolted joints of woven fabric CFRP composite plates using Hashin formulations. In: AWAM International Conference on Civil Engineering 2015 (eco-AICCE 2015), 9-11 September 2015, Kuala Lumpur, Malaysia.

Ahmad, Mohd Hilton and Crocombe, Andrew D. and Smith, Paul A. (2014) Strength prediction in CFRP woven laminate bolted single-lap joints under quasi-static loading using XFEM. Composites Part A: Applied Science and Manufacturing, 66 . pp. 82-93. ISSN 1359-835X

Ahmad, Mohd Hilton and Crocombe, Andrew D. and Smith, Paul A. (2014) Strength prediction of notched woven composite plates using a cohesive zone approach. Advanced Materials Research, 845 . pp. 199-203. ISSN 1662-8985

Ahmad, Mohd Hilton and Ismail, Al-Emran (2016) Fracture energy of woven fabric kenaf composite plates with different fiber orientations. In: 2016 7th International Conference on Manufacturing Science and Technology, 16-18 July 2016, Curtin University Sarawak.

Ahmad, Roslee and Asmael, M. B. A. and Sadeghi, R. and Mohamad, H. and Harun, Zawati and Sulaiman, Hasan (2013) The effect of metallic addition on mechanical property of aluminum (LM6) alloy. Applied Mechanics and Materials, 465 . pp. 958-961. ISSN 16627482

Ahmad, Roslee and Sadeghi, R. and Asmael, M. B. A. and Mohamad, H. and Harun, Zawati and Sulaiman, Hasan (2013) The influence of metallic addition on fluidity of aluminum (LM6) alloy. Applied Mechanics and Materials, 465 . pp. 954-957. ISSN 16627482

Ahmad, Rosli and Asmael, M. B. A. (2015) Effect of lanthanum addition on microstructure and hardness as cooling rate function of ADC12 eutectic cast alloy. In: 6th International Conference on Mechanical, Industrial, and Manufacturing Technologies (MIMT 2015), 6-7 March 2015, Melaka, Malaysia.

Ahmad, S. N. and Hashim, Jamaluddin and Ghazali, Mohd Imran (2005) The effects of porosity on mechanical properties of cast discontinuous reinforced metal-matrix composite. Journal of Composite Materials, 39 (5). pp. 451-466. ISSN 0021-9983 (Unpublished)

Ahmad, Sufizar and Bakar, M. S. A. and Rahman, H. A. and Basri, Hatijah and Mukhtar, Affidah Mardziah (2014) XRD and EDS analysis of composite cathode powders LSCF-SDCC-Ag for low temperature solid oxide fuel cells (LTSOFC). In: International Conference on X-Ray & Related Technique in Research and Industry (ICXRI2014), 11-13 August 2014, Johor Bahru, Johor.

Ahmad, Sufizar and Ismail, Al Emran (2005) Effect of empty fruit bunch (EFB) fibre reinfoced low density polyethylena epoxy (LDPE) composites on mechanical propeties. In: International Conference on Natural Resources and Environmental Management 2005 (NREM2005), 28-29 November 2005.

Ahmad, Sufizar and Muhamad, N. and Muchtar, Andanastuti and Sahari, J. and Jamaludin, K. R. and Ibrahim , Mohd Halim Irwan and Mohamad Nor, N. H. (2014) Influence of composition and sintering temperature on density for pure and titanium alloy foams. Jurnal Teknologi, 68 (4). pp. 83-86. ISSN 2180-3722

Ahmad, Sufizar and Abu Kassim, Mohamad Azizi Fabrication of titanium foam by using compaction method. In: 26th Regional Conference on solid state science & technology 2011, 22 - 24 Nov 2011, Negeri Sembilan Malaysia.

Ahmad Jeni, Mohamad Luthfi and Akasah , Zainal Abidin (2013) Implementation of lean construction concept among contractors in Malaysia. In: International Conference on Engineering and Built Environment 2013 (ICEBE 13'), 19-20 November 2013, Universiti Kebangsaan Malaysia, Bangi.

Ahmad Zaidi, A. M. and Abdul Hamid, H. and Ghazali, Mohd Imran and Abdul Rahman, Ismail and Mahzan, S. and Yusof, Mohd Sallehuddin (2009) Finite element simulation on damage and fracture properties of a ring cut from filament-wound pipes with and without delamination. International Journal of Integrated Engineering, 1 (1). pp. 61-66. ISSN 1985-854X

Ahmad Zaidi, Ahmad Mujahid and Abdul Hamid, H. and Ahmad Zaidi, N. H. and Ahmad Zaidi, A.F. and Yusof, M.S. (2008) Investigation of damage and fracture properties of a ring cut from filament-wound pipes with and without delamination. In: International Conference on Mechanical and Manufacturing Engineering 2008 (ICME 2008), 21-23 May 2008, Puteri Pacific Johor Bahru, Johor, Malaysia.

Ahmad Zaidi, Ahmad Mujahid and Md Asif, M.M. and Ahmad Zaidi, N.H. and Yusof, M.S. (2008) Analysis of cracked in thick-tube using finite element modelling. In: International Conference on Mechanical and Manufacturing Engineering 2008 (ICME 2008), 21-23 May 2008, Puteri Pacific Johor Bahru, Johor, Malaysia.

Ahmad Zaidi , Ahmad Mujahid and Hadipramana, Josef and Abdul Samad, Abdul Aziz and Mohamad, Noridah and Riza, Fetra Venny (2013) Potential of RHA in foamed concrete subjected to dynamic impact loading. In: Advanced Materials Engineering and Technology (ICAMET 2013) , 28-29 November 2013, Bandung, Indonesia .

Ahmad Zaidi , Ahmad Mujahid and Md Asif, M. M. and Abdul Rahman, Ismail and Rasool Mohideen, S. and Ahmad Zaidi, A. F. and Ahmad Zaidi, N. H. and Yusof, Mohd Sallehuddin (2009) Finite element simulation on crack analysis of a thick-tube. International Journal of Integrated Engineering, 1 (1). pp. 67-71. ISSN 1985-854X

Ahmad Zamhari, Kemas and Hermadi, Madi and Ali, Mohamed H. (2014) Comparing the performance of granular and extracted binder from buton rock asphalt. International Journal of Pavement Research and Technology, 7 (1). pp. 25-30. ISSN 1997-1400

Ainuddin, Ainun Rahmahwati and Hashim, M. F. (2015) Hydrothermal synthesis effect on growth of zinc oxide structure. In: 2nd International Materials, Industrial & Manufacturing Engineering Conference (MIMEC 2015), 4-6 February 2015, Bali Nusa Dua Convention Center, Bali, Indonesia.

Ainuddin, Ainun Rahmahwati and Mior Idris, Wan Nur Amalina (2015) Growth OF ZnO nanostructures with different alkaline precursor solution. ARPN Journal of Engineering and Applied Sciences, 11 (12). pp. 7612-7616. ISSN 18196608

Alfejani, Marwan (2014) Experimental investigation on shear strengthening of RC continuous T-beams with different layer of CFRP schemes. In: InCIEC 2014 International Civil and Infrastructure Engineering Conference, 28 September – 1 October 2014, Kota Kinabalu, Sabah, Malaysia.

Ali, Noorwirdawati and Abdul Samad, Abdul Aziz and Mohamad, Noridah and Jayaprakash, J. (2013) Shear behaviour of pre-cracked continuous beam repaired using externally bonded CFRP strips. Procedia Engineering, 53 . pp. 129-144. ISSN 1877-7058

Ali, Noorwirdawati and Yaacob, Kharina Yulistini and Burhanudin, Mohd. Khairy and Shahidan, Shahiron and Abdullah, Siti Radziah (2016) Investigation of compressed earth brick containing ceramic waste. ARPN Journal of Engineering and Applied Sciences, 11 (8). ISSN 18196608

Ali, Nurdin (2014) Analysis of corrosion fatigue for commercially pure titanium using nitrogen ion implantation. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Aliyu, Mohammed Kabir and Abd Karim, Ahmad Tarmizi (2016) The effect of cement and rice husk ash on the compressive strength and leachability of artificially contaminated stabilized sediment. ARPN Journal of Engineering and Applied Sciences, 11 (8). ISSN 18196608

Aman, Mohamad Yusri and Shahadan, Zulkurnain and Mat Noh, Mohd Zaime (2014) A comparative study of anti-stripping additives in porous asphalt mixtures. Jurnal Teknologi, 70 (7). pp. 139-145. ISSN 2180-3722

Aman, Mohamad Yusri and Shahadan, Zulkurnain and Md. Ruhani, Munzilah and Buhari, Rosnawati (2014) Effects of aging on the physical and rheological properties of asphalt binder incorporating rediset. Jurnal Teknologi, 70 (7). pp. 111-116. ISSN 2180-3722

Araby, Sherif and Zaman, Izzuddin and Meng, Qingshi and Kawashima, Nobuyuki and Michelmore, Andrew and Kuan, Hsu-Chiang and Majewski, Peter and Ma, Jun and Zhang, Liqun (2013) Melt compounding with graphene to develop functional, high performance elastomers. Nanotechnology, 24 . p. 165601. ISSN 0957-4484

Asmawi, Rosli and Ibrahim , Mohd Halim Irwan and Amin, A. M. and Sopyan, Iis (2014) Synthesis and characterization of nanocrystalline hydroxyapatite powder. In: International Conference on X-Ray & Related Technique in Research and Industry (ICXRI2014), 11-13 August 2014 , Johor Bahru, Johor.

Ayop, Sallehuddin Shah and John, J. Cairns (2014) The influence of impressed current on residual bond strength of corroded structure. In: International Integrated Engineering Summit (IIES 2014), 1-4 December 2014, Universiti Tun Hussein Onn Malaysia, Johor.

Azalan, Azril (2013) Penentuan ciri-ciri akustik bilik dengan kaedah rumus sabine secara simulasi. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Aziz, M. S. A. and Muhamad, N. A. and Mohd Jamail, Nor Akmal and Kamarudin, Qamarul Ezani (2013) Effect of surface tracking on LLDPE-NR/TiO2 nanocomposite conductivity using PDC technique. In: International Conference on Production Engineering (ICPE2013), 30-31 May 2013, Tokyo, Japan.

Azlan , Mohd Azwir and Ismail, Al Emran (2014) Effect of mechanical mismatch on the stress intensity factors of inclined cracks under mode I tension loading. In: International Integrated Engineering Summit (IIES 2014), 1-4 December 2014, Universiti Tun Hussein Onn Malaysia, Johor.

Azmi, M. A. and Yusoff, M.F.C. and Abdullah, H.Z. and Idris, M. I. (2011) Rigid polyurethane foam reinforced coconut coir fiber properties. In: International Conference on Mechanical and Manufacturing Engineering 2011 (ICME 2011), 06-07 Jun 2011, Putrajaya.

Azmi, Mohd Azham and Abdullah, Hasan Zuhudi and Idris, Maizlinda Izwana (2011) Sandwich composites of glass fibre panel and polyurethane/coconut coir foam core (GFRP - PUC). Key Engineering Materials, 471 . pp. 391-396. ISSN 1662-9795

B

Badarulzaman, Nur Azam (2010) Pengaruh adukan dan kepekatan partikel silicon karbida sebagai penguat terhadap kelakuan salutan komposit matriks nikel. PhD thesis, Universiti Sains Malaysia.

Badarulzaman, Nur Azam and Hariyanti, Hariyanti and Mohamad, Ahmad Azmin and S. , Purwadaria and Ahmad, Zainal Arifin Co-deposition of Cu-Sn-Zn alloy from an alkaline cyanide solution. In: Proceeding of the International Conference on X-rays and Related Techniques in Research and Industry (ICXRI-2006), 29-30 November 2006, Putrajaya.

Buhari, Rosnawati and Chong , Ai Ling and Abdullah, Mohd Ezree and Abu Bakar, Siti Khatijah and Mohd Kamarudin, Nurul Hidayah and Shamsudin, Mustafa Kamal and Ahmad, Mohd Khairul and Puteh, Saifullizam (2016) The physical and rheological characteristics of modified asphalt binder with titanium dioxide R15. Jurnal Teknologi (Sciences & Engineering), 78 (7–5). pp. 21-26. ISSN 21803722

Buhari, Rosnawati and Puteh, Saifullizam (2013) Damage equivalent of the flexible pavement variation with load applied. Applied Mechanics and Materials , 405 . pp. 1917-1922. ISSN 1662-7482

C

Chai , Teck Jung and Lee , Yee Loon and Tang , Hing Kwong and Koh , Heng Boon Strength behaviours of biomass fiber-reinforced concrete slab. In: The International Conference on Civil and Environmental Engineering Sustainability (IConCEES 2011), 3-5 April 2012, Johor Bahru, Malaysia.

Chan, Boon Loong (2016) Cold compression in direct recycling of aluminium 6061. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Chan, Chee-Ming and Ch'ng, S. S. (2010) Preliminary study of s-wave velocity and unconfined compressive strength of cement- palf stabilised kaolin. International Journal of Integrated Engineering , 2 (2). pp. 1-8. ISSN 2229-838X

Che Abdul Aziz, Mohd Aswadi (2015) Fatigue strength of woven kenaf fibre reinforced polyester composites. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Chin, Fhong Soon and Zai, Peng Goh and Lee, Chin Ku and Ten, Ten Lee and Kian, Sek Tee (2014) A squeegee coating apparatus for producing a liquid crystal based bio-transducer. Applied Mechanics and Materials , 465 . pp. 759-763. ISSN 1660-9336

D

Daud, Zawawi and Mohd Hatta, Mohd Zainuri and Mohd Kassim, Angzzas Sari and Mohd Aripin, Ashuvila (2013) Suitability of Malaysia’s pineapple leaf and napier grass as a fiber substitution for paper making industry. In: 6th Engineering Conference: energy and environment (ENCON2013), 2-4 July 2013, Kuching, Sarawak.

E

Elewe, Adel Muhsin (2014) Feasibility study on producing functional parts using molding technology. Masters thesis, Universiti Tun Hussein Onn Malaysia.

F

Farzadnia, Nima and Abang Ali, Abang Abdullah and Demirboga, Ramazan (2011) Incorporation of mineral admixtures in sustainable high performance concrete. International Journal of Sustainable Construction, 2 (1). pp. 1-13. ISSN 21803242

Feriyanto, Dafit and Idris, Maizlinda Izwana and Sebayang, Darwin (2014) Effect of Cr to Fe on the solid solubility, lattice parameter and strain of Fe80Cr20 alloy powder. Applied Mechanics and Materials, 660 . pp. 280-284. ISSN 1662-7482

Feriyanto, Dafit and Idris, Maizlinda Izwana and Sebayang, Darwin (2014) Effect of Cr to Fe on the solid solubility, lattice parameter and strain fabrication of Fe80Cr20 alloy powder. In: International Conference on X-Ray & Related Technique in Research and Industry (ICXRI2014), 11-13 August 2014 , Johor Bahru, Johor.

Feriyanto, Dafit and Idris, Maizlinda Izwana and Sebayang, Darwin (2014) The effect of ultrasonic treatment on the oxidation resistance and microstructure of Fe80Cr20 alloy powder at high temperature oxidation process. In: International Conference on X-Ray & Related Technique in Research and Industry (ICXRI2014), 11-13 August 2014, Johor Bahru, Johor.

G

Goh, Wan Inn and Mohamad, Noridah and Abdullah, Redzuan (2012) Development of precast lightweight foamed concrete sandwich panel (PLFP) with double shear truss connectors. In: 5th International Conference on Postgraduate Education (ICPE-5 2012), Universiti Teknologi Malaysia, Skudai, 18-19 December 2012.

H

Hadipramana, Josef and Abdul Samad, Abdul Aziz and Ibrahim, Rosziati and Mohamad, Noridah and Venny Riza, Fetra (2015) The energy absorption of modified foamed concrete with rice husk ash subjected to impact loading. In: International Engineering Research and Innovation Symposium 2015 (IRIS), 12–13 September 2015, Putrajaya, Malaysia.

Hadipramana, Josef and Abdul Samad, Abdul Aziz and Ibrahim, Rosziati and Mohamad, Noridah and Riza, Fetra Venny (2016) The energy absorption of modified foamed concrete with rice husk ash subjected to impact loading. ARPN Journal of Engineering and Applied Sciences, 11 (12). ISSN 18196608

Hadipramana, Josef and Abdul Samad, Abdul Aziz and Ahmad Zaidi , Ahmad Mujahid and Mohammad, Noridah and Riza, Fetra Venny (2012) Effect of uncontrolled burning rice husk ash in foamed concrete. In: International Conference on Advanced Material Engineering & Technology (ICAMET 2012) , 28-30 November 2012, Penang, Malaysia.

Hadipramana, Josef and Abdul Samad, Abdul Aziz and Mohamad, Noridah and Mokhatar, Shahrul Niza and Riza, Fetra Venny (2016) Penetration depth study from previous empirical formula of modified foamed concrete slab under low impact load from a non-deformable impactor. Jurnal Teknologi (Sciences & Engineering), 78 (5). pp. 147-151. ISSN 21803722

Hamzah, Ahmad Farhan and Wan Ibrahim, Mohd Haziman and Jamaluddin, Norwati and Putra Jaya, Ramadhansyah and Zainal Abidin, Norul Ernida (2015) Fresh properties of self-compacting concrete integrating coal bottom ash as a replacement of fine aggregates. In: 2nd International Materials, Industrial & Manufacturing Engineering Conference (MIMEC 2015), 4-6 February 2015, Bali Nusa Dua Convention Center, Bali, Indonesia .

Hamzah, E. and Yong, Tze Mi and Mat Yajid, M. A. (2013) Surface morphology and bond characterization of nanocrystalline diamonds grown on tungsten carbide via hot filament chemical vapor deposition. Journal of Crystal Growth, 372 . pp. 109-115. ISSN 0022-0248

Haris, Nur Ismalina (2013) Failure analysis of conveyor chain links: a case study at Top Glove Sdn. Bhd. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Harun, Dalila and Mohd Tobi, Abd Latif and Singh Chaal, A. and Md. Nasir, R. (2014) Characterisation of plasticity response for reciprocating sliding wear test of Ti-6al-4v under variables normal load. In: International Conference on X-Ray & Related Technique in Research and Industry (ICXRI2014), 11-13 August 2014 , Johor Bahru, Johor.

Harun, Zawati and Gethin, D. T. (2012) Drying (consolidation) porous ceramic by considering the microscopic pore temperature gradient. Applied Mechanics and Materials, 147 . pp. 210-214. ISSN 1662-7482

Hasan, Zaki (2003) Penghasilan dan penilaian modul pengujian ke atas konkrit basah bagi pelajar kursus kejuruteraan awam. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Hasbullah, Meor and Kurniawan, Denni and M. Nor, Fethma (2015) Strain distribution in severe plastic deformation of using equal channel angular pressing at 90° and 120° channel angles. In: 2nd International Materials, Industrial & Manufacturing Engineering Conference (MIMEC 2015), 4-6 February 2015, Bali Nusa Dua Convention Center, Bali, Indonesia.

Hashim, Mohd Yussni (2016) Effect of alkali treatment conditions optimization on kenaf fiber polymer composite characterization. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Hashim, Mohd Yussni and Ahmad Zaidi , Ahmad Mujahid and Ariffin , Saparudin Plant fiber reinforced polymer matrix composite: a discussion on composite fabrication and characterization technique. In: The International Conference on Civil and Environmental Engineering Sustainability (IConCEES 2011), 3-5 April 2012, Johor Bahru, Malaysia.

Hashim, Mohd Yussni and Mohd Amin, Azriszul and Vijay, R. Raghavan (2007) Effects of runner diameter on the mechanical strength and porosity distribution of thin section castings. In: Regional Conference on Engineering Mathematics, Mechanics, Manufacturing & Architecture (EM3ARC) 2007, 2007.

Hashim, Mohd Yussni and Roslan, Mohd Nazrul (2014) Impact of alkali treatment conditions on kenaf fiber polyester composite tensile strength. Applied Mechanics and Materials, 660 . pp. 285-289. ISSN 1662-7482

Hashim, Mohd Yussni and Roslan, Mohd Nazrul. and Marwah@Omar, Omar Mohd Faizan and Mahzan@Mohd Zin, Shahruddin and Ariffin, Saparudin (2014) The impact of alkali treatment conditions on tensile strength of kenaf fiber. In: International Integrated Engineering Summit (IIES 2014), 1-4 December 2014, Universiti Tun Hussein Onn Malaysia, Johor.

Hassan , Hashimah Kho (2013) Kajian terhadap ketahanan hentaman ke atas konkrit berbusa yang diperkuat dengan serat kelapa sawit. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Hatta, Nasrul (2007) Preparation and mechanical properties of palm fiber/polylactic acid composites. Masters thesis, Nagoya Institute of Technology.

Hehsan, Haffidzudin and Ahmad, Roslee (2014) The effect of vortex well thickness on microstructure and mechanical properties of aluminium LM6. Applied Mechanics and Materials , 465 (2). pp. 1219-1223. ISSN 1660-9336

Hermadi, Madi (2013) Developing new chemical-rheological models and chemical-durability indices of bitumen. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Hilton Ahmad, Mohd and Mohd Noor, Nurazuwa (2009) Chemical attack of Malaysian pozzolans concrete. Journal of Science and Technology, 1 (1). pp. 11-24. ISSN 1985-8809

Hussin, Rosniza and Kwang-Leong, Choy and Xiang , Hui Hou (2014) The effect of substrate on Ti02 thin films deposited by atomic layer deposition (ALD). In: International Conference on X-Ray & Related Technique in Research and Industry (ICXRI2014), 11-13 August 2014, Johor Bahru, Johor.

I

Ibrahim, Mohd Halim Irwan and Abdul Razak, M.I. and Selamat, M.A. and Mustafa, N. (2015) Carbon-copper (C-Cu) composites using local carbon material through warm compaction process for potential electrical and electronic applications. In: International Engineering Research and Innovation Symposium 2015 (IRIS), 12–13 September 2015, Putrajaya, Malaysia.

Ibrahim, Mohd Halim Irwan and Manaf, M. H. A. and Othman, Mohd Hilmi and Mustafa, N. and Masrol, Shaiful Rizal and Rafai, Noor Hakim (2014) Optimisation of processing condition using Taguchi Method on warpage for HDPE- clay composite. Applied Mechanics and Materials , 660 . pp. 28-32. ISSN 1662-748

Ibrahim, Mohd Halim Irwan and Zainol, M. Z. R. and Othman, Mohd Hilmi and Mohd Amin, Azriszul and Asmawi, Rosli and Sa'ude, N. (2014) Optimisation of processing condition using Taguchi Method on strength of HDPE- natural fibres micro composite. Applied Mechanics and Materials, 660 . pp. 33-37. ISSN 1662-7482

Ibrahim, Mohd Rasidi and Abd Rahim, Erween and Ghazali, Mohd Imran and Chai, M. H. and Goh, Z. O. (2014) Experimental analysis on ultrasonic assisted turning (UAT) based on innovated tool holder in the scope of dry & wet machining. Applied Mechanics and Materials, 660 . pp. 104-108. ISSN 1662-7482

Ibrahim@Tamrin, Mohd Norihan (2008) Stiffness and vibrational characteristics of SMS/DER331 composites with shape memory alloy long fibers. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Idris, M. I. and T., C. Lee and Abdullah, Hasan Zuhudi (2015) Effect of uv light treatment condition on apatite formation of anodised titanium. In: 2nd International Materials, Industrial & Manufacturing Engineering Conference (MIMEC 2015), 4-6 February 2015, Bali Nusa Dua Convention Center, Bali, Indonesia.

Isa, N. M. A. and Sa'ude, Nasuha and Ibrahim, Mustaffa and Hamid, S. M. and Kamarudin, K. (2014) A study on melt flow index on copper-abs for fused deposition modeling (FDM) feedstock. In: International Integrated Engineering Summit (IIES 2014), 1-4 December 2014, Universiti Tun Hussein Onn Malaysia, Johor.

Ismail, Al Emran (2012) Analisis mekanik patah pada retak dalam bar berbentuk silinder padu. PhD thesis, Universiti Kebangsaan Malaysia.

Ismail, Al Emran (2016) Crushing mechanisms of cylindrical winding kenaf fiber reinforced composites. Jurnal Teknologi (Sciences & Engineering), 78 (6). pp. 45-50. ISSN 21803722

Ismail, Al Emran (2012) Probabilistic analysis of surface crack in round bars under bending moments. In: 2012 IEEE Colloquium on Humanities, Science & Engineering Research (CHUSER 2012), 3-4 December 2012, Kota Kinabalu, Sabah.

Ismail, Al Emran (2013) Probabilistic analysis of surface crack in round bars under tension loading. Applied Mechanics and Materials , 315 . pp. 655-659. ISSN 1660-9336

Ismail, Al Emran (2015) Retak pada silinder padu. Penerbit UTHM. ISBN 978-967-0764-23-8

Ismail, Al Emran and Ariffin, A. K. and Abdullah, S. (2012) Stress intensity factors for surface cracks in round bar under single and combined loadings. Meccanica, 47 (5). pp. 1141-1156. ISSN 0025-6455

Ismail, Al Emran and Ariffin, A. K. and Abdullah, S. and Ghazali, M. J. (2011) Off-set crack propagation analysis under mixed mode loadings. International Journal of Automotive Technology, 12 (2). pp. 225-232. ISSN 1229-9138

Ismail, Al Emran and Ariffin, Ahmad Kamal and Abdullah, Shahrum and Ghazali, Mariyam Jameelah and Abdulrazzaq, Mohammed and Daud, Ruslizam (2012) Stress intensity factors under combined bending and torsion moments. Journal of Zhejiang University - Science A, 13 (1). pp. 1-8. ISSN 1673-565X

Ismail, Al Emran and Che Abdul Aziz, M.A. (2015) Fatigue strength of woven kenaf fiber reinforced composites. In: International Conference on Mechanical Engineering Research (ICMER), 18-19 August 2015, Kuantan, Pahang.

Ismail, Al Emran and Hassan, M. A. and Kamaruddin, K. A. (2014) Perforated impact strength of woven kenaf fiber reinforced composites. In: International Integrated Engineering Summit (IIES 2014), 1-4 December 2014, Universiti Tun Hussein Onn Malaysia, Johor.

Ismail, Azzura (2014) Corrosion behavior of WC-Co in high sulphate content. In: 4th International Conference on Key Engineering Materials (ICKEM 2014) , 22-23 March 2014, Bali, Indonesia .

Ismail, Azzura (2014) Corrosion behavior of austenitic stainless steel in high sulphate content. Advanced Materials Research, 893 . pp. 397-401. ISSN 1022-6680

Ismail, Azzura (2014) The corrosion attack on stainless steel 316L and WC-Co in high sulphate-chloride ratio. In: International Conference on X-Ray & Related Technique in Research and Industry (ICXRI2014), 11-13 August 2014, Johor Bahru, Johor.

Ismail, Azzura and Ahmad Fuad, M. F. (2014) Effect of immersion and green inhibitor to corrosion rate of carbon steel. In: International Conference on X-Ray & Related Technique in Research and Industry (ICXRI2014), 11-13 August 2014 , Johor Bahru, Johor.

Ismail, Azzura and Mat Nawi, A. N. (2014) Banana trunk as green corrosion inhibitor for carbon steel in subsea applications. In: International Conference on X-Ray & Related Technique in Research and Industry (ICXRI2014), 11-13 August 2014 , Johor Bahru, Johor.

Ismail, Azzura and Mohd Tajuddin, M. A. (2014) Banana peel as green corrosion inhibitor for stainless steel 304. In: International Conference on X-Ray & Related Technique in Research and Industry (ICXRI2014), 11-13 August 2014 , Johor Bahru, Johor.

Ismail, Isham and Jamaluddin, Norwati and Shahidan, Shahiron (2015) A review on performance of waste materials in self compacting concrete (SCC). Jurnal Teknologi, 78 (5). pp. 29-35. ISSN 2180-3722

Ismail, M. A. and Ismail, Al Emran (2014) Crushing behaviour of empty steel tubes under eccentric loading. In: International Conference on X-Ray & Related Technique in Research and Industry (ICXRI2014), 11-13 August 2014 , Johor Bahru, Johor.

Ismail, Mohd. Azizan (2016) Permodelan keupayaan tenaga serapan bagi tiub pelindung laga menggunakan kaedah unsur terhingga. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ismail, Noorli and Mohd Saman, Hamidah (2014) Microstructure examination and strength characteristics of effective microbed cement. In: International Conference on Biological, Civil and Environmental Engineering (BCEE-2014) , 17-18 March 2014, Dubai (UAE) .

Ismail, Sushilawati (2014) Water absorption and salt attack resistance of coal ash brick made of different percentage of foam content. Masters thesis, Universiti Teknologi Mara.

Ismon, Maznan (2013) Condition monitoring of variable speed worm gearbox lubricated with contaminated gear oil. Masters thesis, Universiti Tun Hussein Onn Malaysia.

J

J, Jayaprakash and Abdul Samad, Abdul Aziz and Mohamad, N. and Choong, K.K. and Megat Azmi, M.J. and Badorul, H.A.B. (2010) Effects of GFF bands on normal and high strength concrete cylinders. International Journal of Integrated Engineering, 2 (2). pp. 1-8. ISSN 2229-838X

Jaafar, Azman and Mat Seman, Ahmad Shakri (2009) Kajian sifat mekanikal papan serpai berlapis yang mengandungi habuk kayu gergaji. Journal of Science and Technology, 1 (1). pp. 73-83. ISSN 1985-8809

Jamaluddin, Norwati (2011) Behaviour of elliptical concrete-filled steel tube (CFT) columns under axial compression load. PhD thesis, University of Leeds.

Jamian, Saifulnizan and Yutiman, Safwan and Hehsan, Haffidzudin (2015) AI LM6 hollow cylinder fabricated using centrifugal casting. In: International Engineering Research and Innovation Symposium 2015 (IRIS 2015), 12–13 September 2015, Putrajaya, Malaysia.

Jamian, Saifulnizan and Zainal Abidin, M. R. and Muda, A. M. (2014) Crashworthiness behavior of hollow al-based functionally graded material (FGM) box under quasi-static loading. In: International Integrated Engineering Summit (IIES 2014), 1-4 December 2014, Universiti Tun Hussein Onn Malaysia, Johor.

Jamo, H. U. and Noh, Mohamad Zaky and Ahmad, Zainal Arifin (2013) Structural analysis and surface morphology of a treated palm oil fuel ash. In: Prosiding Seminar Kebangsaan Aplikasi Sains dan Matematik 2013 (SKASM 2013) , 29-30 Oktober 2013, Batu Pahat, Johor .

Juki, Mohd Irwan and A. Faisal Alshalif, A. Faisal Alshalif and N. Othman, N. Othman and L. H. Anneza, L. H. Anneza (2015) Effect of ureolytic bacteria on compressive strength and water permeability on bio-concrete. In: The 1st International Conference on Civil, Architectural, Structural and Constructional Engineering (ICCASCE 2015), 21-23 August 2015, Dong-A University, Busan, Korea.

Juki, Mohd Irwan and Luis Hii, Anneza and Othman , Norzila and A. Faisal , Alshalif (2016) Compressive strength and water penetration of concrete with enterococcus faecalis and calcium lactate. In: Key Engineering Materials.

Juki, Mohd Irwan and Muhamad, Khairunnisa and Mahamad, Mohd Khairil Annas and Kok , Boon Ching and Othman, Norzila and Abdul Kadir, Aeslina and Roslan, Muhammad Asyraf and Khalid, Faisal Sheikh (2013) Development of concrete mix design nomograph containing polyethylene terephtalate (PET) as fine aggregate. Advanced Materials Research, 701 . pp. 12-16. ISSN 1022-6680

Juki, Mohd Irwan and Othman, Norzila (2013) An overview of bioconcrete for structural repair. In: 2013 International Conference on Mechatronic Systems and Materials Application (ICMSMA 2013) , 26-27 June 2013, Guangzhou, China.

Juki, Mohd Irwan and R. M., Faisal and Othman, Norzila and Wan Ibrahim, Mohd Haziman and Asyraf, R. M. and M. M. K., Annas (2013) Performance of concrete using light waste PET fibre. In: 2nd International Conference on Sustainable Materials (ICoSM 2013) , 26-27 March 2013, Penang, Malaysia .

Juki, Mohd Irwan and Roslan, Muhammad Asyraf and Koh , Heng Boon and Abdul Kadir, Aeslina and M. M. K., Annas and Khalid, Faisal Sheikh and Othman, Norzila (2014) Deflection behaviour of irregular-shaped polyethylene terephthalate fibre reinforced concrete beam. In: 4th International Conference on Key Engineering Materials (ICKEM 2014) , 22-23 March 2014, Bali, Indonesia .

Juki, Mohd Irwan and Zamer, M. M. and Othman, Norzila (2015) A Review on interlocking compressed earth blocks (ICEB) with addition of bacteria. In: IConCEES 2015, 01-02 December 2015, Melaka, Malaysia.

K

Kamardan, M. Ghazali and A. Zaidi, N. Hidayah and Dalimin, M. Noh and A. Zaidi, A. Mujahid and Jamaludin, S. Bahrin and Abdul Jamil , Muhammad Mahadi (2010) The sintering temperature effect on the shrinkage behavior of cobalt chromium alloy. American Journal of Applied Sciences, 7 (11). pp. 1443-1448. ISSN 15469239

Kamarudin, Ahmad Fahmy and Daud, Mohd Effendi and Koh , Heng Boon and Ibrahim, Zainah and Ibrahim, Azmi (2013) Dynamic characteristics and seismic performance evaluation of low rise existing RC moment resisting frame using microtremor technique and standard code of practice. In: Proceedings of the 4th European Conference of Civil Engineering (ECCIE '13) , 8-10 Oktober 2013, Antalya, Turkey . (Unpublished)

Kamarudin, Ahmad Fahmy and Mohd Ghazali, Aruan Efendy and Abdul Hamid, Hanizah and Gurdip Singh, Paldip Singh (2009) Bonding strength of near surface mounted glass fibre reinforced polymer. In: Persidangan Kebangsaan Kejuruteraan Awam ke-5 (AWAM 09), 27-29 October 2009, Kuala Lumpur.

Kamarudin, Kamarul-Azhar and Ismail, Al Emran (2014) Prediction of elastic properties for unidirectional carbon composites: periodic boundary condition approach. In: International Integrated Engineering Summit (IIES 2014), 1-4 December 2014, Universiti Tun Hussein Onn Malaysia, Johor.

Kamarudin, Khairu and Wahab, Md Saidin and Ramli, M. H. (2015) Characteristic of cobalt chromium by Nd:Yag laser sintering process. In: 9th International Conference on Advanced Computational Engineering and Experimenting (ACEX 2015), 29 June - 2 July 2015, Munich, Germany.

Kamdani, Kamaruddin (2005) Influence of preheating on chatter and machinability of titanium alloy-Ti6A14V. Masters thesis, International Islamic University Malaysia.

Kamdi, Zakiah and Voisey, K. T. (2014) Characterization of WC-Co coatings corrosion product by raman spectroscopy. In: International Conference on X-Ray & Related Technique in Research and Industry (ICXRI2014), 11-13 August 2014 , Johor Bahru, Johor.

Kasim, Narimah (2008) Improving materials management on construction projects. PhD thesis, Loughborough University.

Khaerudini, Deni Shidqi (2011) Development of nanocrystalline iron-chromium alloy by means of sintering and ion implantation for interconnect application in high-temperature solid oxide fuel cells. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Khaerudini, Deni Shidqi (2011) Development of nanocrystalline iron-chromium alloy by means of sintering and ion implantation for interconnect application in high-temperature solid oxide fuel cells. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Khairu, K. and Raman, I. and Mohamed, M. A. S. and Ibrahim , Mustafa and Wahab, Md Saidin (2012) Parameter optimerization for photo polymerization of microstereolithography. In: International Conference on Advanced Material Engineering & Technology (ICAMET 2012) , 28-30 November 2012, Penang, Malaysia.

Khalid , Siti Nor Azila (2013) Mechanical strength of as-compacted aluminium alloy waste chips. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Khamis, Siti Salwa (2015) Effect of hot press forging process on different chip size, pre-compaction cycle, and holding time in direct recycling of aluminium alloy AA6061. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Khirotdin, Rd. Khairilhijra (2004) Manufacture of cylinders with axial imperfections. Masters thesis, The University of Liverpool.

Koh, Ching Theng and Michelle L. , Oyen (2013) Defect tolerance of fibrous networks. In: Twenty First Annual International Conference on Composites/Nano Engineering (ICCE-21) , 21-27 July 2013, Tenerife, Spain.

Koh, Ching Theng and Strange , D. G. and Tonsomboon , K. and Oyen , M. L. (2013) Failure mechanisms fibrous scaffolids. Acta Biomaterialia, 9 (7). pp. 7326-7334. ISSN 1742-7061

Koh , Heng Boon and Lee, Yee Loon and Yeoh, David (2004) Medium lightweight concrete containing palm oil clinker (POC) and palm oil fuel ash (POFA). In: Civil Engineering Conference. , July 2004, Universiti Sains Malaysia, Malaysia.

Koh , Heng Boon and Lee, Yee Loon and Yeoh, David and Noor Mohamad, Rosli (2003) The use of palm oil clinker in self compacting lightweight concrete. In: Conference IPTA. , 2003, PWTC, Kuala Lumpur.

L

Le, Quyen-Huyen and Kuan, Hsu-Chiang and Dai, Jia-Bin and Zaman, Izzuddin and Luong, Lee and Ma, Jun (2010) Structure-property relations of 55 nm particle-toughened epoxy. Polymer, 51 . pp. 4867-4879. ISSN 0032-3861

Lee, Yee Loon Teknologi konkrit ringan berudara berbentuk blok dan tuangan insitu. In: Inovasi di persada Institut Pengajian Tinggi Malaysia 2011/2012. Universiti Kebangsaan Malaysia, p. 219.

Lee, Yee Loon and Ahmad Zaidi, Ahmad Mujahid and Koh , Heng Boon and Sulaiman, Suhaizad and Adnan, Suraya Hani and Abdul Rahman, Ismail (2010) Carbonation and water permeability of foamed concrete. International Journal of Sustainable Construction Engineering & Technology, 1 (1). pp. 1-14. ISSN 2180-3242

Lee, Yee Loon and Koh , Heng Boon and Yeoh, David and Mustapha, Shahabudin and Pang, Che Fong and Hung, Yung-Tse (2004) Exploitation of solid wastes in construction – challenges ahead. Jurnal Sains dan Teknologi . pp. 57-66.

Lim , Alvin John Meng Sung (2014) Development of a new sand particle clustering method with respect to its static and dynamic morphological and structural characteristics. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Lim , Yee Kai (2014) Microstructure and mechanical properties of dissimiliar aluminum alloy/stainless steel joints prepared by friction stir spot welding (FSSW). Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ling , Felix Ngee Leh and Kassim, Khairul Anuar and Abdul Karim, Ahmad Tarmizi (2012) Size distribution analysis of Kaolin using laser diffraction technique. Advanced Materials Research, 341 . pp. 108-112. ISSN 1022-6680

Luis Hii, Anneza and Juki, Mohd Irwan and Othman, Norzila and A. Faisal , Alshalif (2015) Identification of bacteria and the effect on compressive strength of concrete. In: IConCEES 2015, 01-02 December 2015, Melaka, Malaysia.

Luis Hii, Anneza and Juki, Mohd Irwan and Othman , Norzila and A. Faisal, Alshalif (2015) Identification of bacteria and the effect on compressive strength of concrete. In: IConCEES 2015, 01-02 December 2015, Melaka, Malaysia.

M

M. Gelim , Khalid. Ali. (2011) Mechanical and physical properties of fly ash foamed concrete. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ma, Jun and La, Ly Truc Bao and Zaman, Izzuddin and Meng, Qingshi and Luong, Lee and Ogilvie, Denise and Kuan, Hsu-Chiang (2011) Fabrication, structure and properties of epoxy/metal nanocomposites. Macromolecular Materials and Engineering, 296 . pp. 465-474. ISSN 1439-2054

Ma, Jun and Meng, Qingshi and Michelmore, Andrew and Kawashima, Nobuyuki and Zaman, Izzuddin and Bengtsson, Carl and Kuan, Hsu-Chiang (2013) Covalently bonded interfaces for polymer/graphene composites. Journal of Materials Chemistry A, 1 . pp. 4255-4264. ISSN 0959-9428

Mad Rosip, N. I. and Ahmad, Sufizar and Jamaludin, K. R. and Mat Noor, Fazimah (2013) Producing of 316L stainless steel (SS316L) foam via slurry method. In: International Conference on Mechanical Engineering Research (ICMER2013), 1-3 July 2013, Kuantan, Pahang.

Madun, Aziman and Kamarudin, Ahmad Fahmy (2013) Investigation of dynamic characteristics and vulnerability assessment of site and existing reinforced concrete building. Other thesis, Universiti Tun Hussein Onn Malaysia.

Mahamad, Mohd Khairil Annas (2014) Shear behaviour of reinforced concrete using polyethyelene terephathalate (PET) bottles as fine aggregate. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mahzan @ Mohd Zin, Shahruddin and M. Bahtiar, Wahieda and Mohamad, Zaleha (2014) Investigation on the tensile strength of treated and untreated woven sugar palm fibre reinforced composites. Applied Mechanics and Materials, 660 . pp. 588-592. ISSN 1662-7482

Masrol, Shaiful Rizal and Ibrahim, Mohd Halim Irwan and Adnan, Sharmiza and Ahmad Tajudin, Muhammad Syauqi Asyraf and Abdul Raub, Radhi and Abdul Razak, Siti Nurul Aqma and Md Zain, Siti Nur Faeza (2017) Effects of total chlorine free (TCF) bleaching on the characteristics of chemi mechanical (CMP) pulp and paper from Malaysian durian (DURIO ZIBETHINUS MURR.) rind. Jurnal Teknologi, 79 (4). pp. 55-64. ISSN 2180–3722

Masrol, Shaiful Rizal and Ibrahim, Mohd Halim Irwan and Adnan, Sharmiza and Amir Shah, Muhammad Safiuddin Syah and Main, Nor Mazlana and Esa, Mohd Faizal and Othman, Mohd Hilmi (2014) Effect of beating process to soda anthraquinone pulp of oil palm male flower spikes fibre. In: International Integrated Engineering Summit (IIES 2014), 1-4 December 2014, Universiti Tun Hussein Onn Malaysia, Johor.

Masrol, Shaiful Rizal and Rosdin, M. K. R. and Ibrahim, M. N. (2013) Sound absorption characteristics of palm oil male flower spikes fiber reinforced composite. In: International Conference on Mechanical Engineering Research (ICMER2013), 1-3 July 2013, Kuantan, Pahang.

Masrol, Shaiful Rizal and Sudin, S. A. and Ibrahim, M. H. I. (2013) Mechanical and physical behaviour of short and randomly oriented banana pseudo-stem fiber reinforced epoxy composite. In: International Conference on Mechanical Engineering Research (ICMER2013), 1-3 July 2013, Kuantan, Pahang.

Masrom, Abdul Kadir and Md. Diah, Noraizam and Mustapha, Mazli and Harun, Zawati Monitoring alloy formation during mechanical alloying process by X-ray diffraction techniques. Malaysian Journal of Science, 21 . ISSN 13943065

Mat Nawi, Abdullah (2016) Effect of waste plaster of paris on physical and mechanical properties of ceramic pottery body. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mat Noor, Fazimah (2009) Development of powder metallurgy route for production of novel fe-al intermetallics for high temperature applications. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mat Noor, Fazimah and Mat Rosip, N. I. and Jamaludin, Khairur Rijal and Ahmad, Sufizar (2014) Effects of sintering temperature on the properties of stainless steel foam. In: International Conference on X-Ray & Related Technique in Research and Industry (ICXRI2014), 11-13 August 2014 , Johor Bahru, Johor.

Mat Nor, Ahmad Hakimi and Yahuda, Aklil Hamdee and Pakir, Faizal (2014) Analysis of lightweight concrete “cakar ayam” foundation for road construction using plaxis 3D foundation software. Applied Mechanics and Materials , 695 . ISSN 1660-9336

Mat Rosip, Noor Idayu and Ahmad, Sufizar and Jamaluddin, K. R. and Mat Noor, Fazimah and Mohd Taib, Hariati (2014) Morphological analysis of SS316L foam produced by using slurry method. In: International Conference on X-Ray & Related Technique in Research and Industry (ICXRI2014), 11-13 August 2014 , Johor Bahru, Johor.

Mat Taib, Noor Hayati (2003) Penghasilan modul pembelajaran kendiri berasaskan cakera padat dalam pengajaran dan pembelajaran bagi subjek Teknologi Bahan 1 (J 3022) Kursus Kejuruteraan Mekanikal. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Mayzan, Mohd Zul Hilmi (2015) Graphite immobilisation in glass composite materials. PhD thesis, The University of Sheffield.

Mayzan, Mohd Zul Hilmi and Stennett, M. C. and Hyatt, N. C. and Hand, R. J. (2015) Graphite immobilisation in iron phosphate glass composite materials produced by microwave and conventional sintering routes. Journal of Nuclear Materials, 454 (2014). pp. 343-351. ISSN 0022-3115

Md Janis, Mohd Azim (2015) A study of multiple cracks on dynamic characteristic and stress intensity factor in cantilever beams. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Md Noor, Nurazuwa (2010) Drying shinkage of Gunny Fabric Fiber (GFC) concrete. In: 3rd Conference on Southeast Asia Natural Resources & Environment Management (SANREM2010) , 3-5 August 2010 , Kota Kinabalu, Sabah.

Md Noor, Nurazuwa and Ahmad, Mohd Hilton and Abd Hamid, Noor Azlina and Shahidan, Shahiron (2010) Drying shrinkage of gunny fabric fiber (GFF) concrete. In: 3rd Conference on Southeast Asia Natural Resources & Environment Management (SANREM 2010) , 3-5 August 2010 , Kota Kinabalu, Sabah.

Md Nor, Noorsuhada and Muhamad Bunnori , Norazura and Ibrahim, Azmi and Shahidan, Shahiron and Mat Saliah, Soffian Noor Relationship between acoustic emission signal strength and damage evaluation of reinforced concrete structure: Case studies. In: 2011 IEEE Symposium on Industrial Electronics and Applications (ISIEA2011), 25 - 28 September 2011, Bayview Hotel Langkawi Malaysia.

Md Salleh, Salihatun and Abd Kadir, M. S. and Ramlee, M. P. and Abd Rahim, Erween and Jelani, A. R. and Ahmad, M. R. and Kasron, Md Zainorin (2014) The effect carbon fiber pole on hand-arm vibration of palm fruit motorised cutter. Applied Mechanics and Materials, 660 . pp. 521-525. ISSN 1662-7482

Md Salleh, Salihatun and Yahya, Musli Nizam and Ghazali, Mohd Imran and Low, Chooi San (2007) A study on comfortness of fiber car seat. In: Regional Conference on Engineering Mathematics, Mechanics, Manufacturing & Architecture (EM3ARC) 2007, 2007.

Md Zain, Mohd Zahiruddin (2005) Influence of electrical parameters and optimization of EDM performance measures on Ti-6A1-4V using DOE/TAGUCHI method. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Meng, Qingshi and Zaman, Izzuddin and Hannam, Joshua R. and Kapota, Shepherd and Luong, Lee and Youssf, Osama and Ma, Jun (2011) Improvement of adhesive toughness measurement. Polymer Testing, 30 . pp. 243-250. ISSN 0142-9418

Mior Idris, Wan Nur Amalina (2015) Characterization of nanostructures ZnO synthesized through hydrothermal method. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohamad, Noridah (2010) The structural behaviour of precast lightweight foamed concrete sandwich panel as a load bearing wall. PhD thesis, Universiti Teknologi Malaysia.

Mohamad, Noridah and A. Samad, A. A. and Goh, Wan Inn and Matias Peralta, Hazel Monica and Hasbullah, Fahmi (2016) Nutrient leach from concrete artificial reef incorporating with organic material. Jurnal Teknologi (Sciences & Engineering), 78 (5). pp. 23-27. ISSN 21803722

Mohamad, Noridah and Abdul Samad, Abdul Aziz and Goh, W. I. and Suffian, S. and Hizami, M.T. (2014) The use of recycled aggregate in a development of reinforced concrete container as a retaining wall: preliminary study. Advanced Materials Research, 831 . pp. 153-157. ISSN 1022-6680

Mohamad, Noridah and Abdul Samad, Abdul Aziz and A. , Nadjua and Goh, Wan Inn and A. , Anas (2016) Fresh state and mechanical properties of self compacting concrete incorporating POFA. Jurnal Teknologi (Sciences & Engineering), 78 (5). pp. 437-441. ISSN 21803722

Mohamad, Noridah and Hassan, Najmuddin (2013) The structural performance of precast lightweight foam concrete sandwich panel with single and double shear truss connectors subjected to axial load. Advanced Materials Research, 634 . pp. 2746-2751. ISSN 1022-6680

Mohamad, Noridah and Mahdi, Muhammad Hilmi (2011) Testing of precast lightweight foamed concrete sandwich panel with single and double symmetrical shear truss connectors under eccentric loading. Advanced Materials Research, 335 . pp. 1107-1116. ISSN 1022-6680

Mohamad, Noridah and Khalifa, Hamza and Abdul Samad, Abdul Aziz and Mendis, Priyan and Goh, Wan Inn (2016) Structural performance of recycled aggregate in CSP slab subjected to flexure load. Construction and Building Materials, 115 . pp. 669-680.

Mohamad, Zaleha (2016) Intelligent signal processing system to investigate damage severity in kenaf fibre composite. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Mohamad, Zaleha and Ariffin, A.K. and Muchtar, A. (2007) Prediction of crack propagation direction for holes under quasi-static loading. In: Proceeding of Computational and Experimental Mechanics (CEM 2007), 27-28 November 2007, Putrajaya, Malaysia.

Mohamad, Zaleha and Mahzan, Shahruddin and Idris, Maizlinda Izwana (2014) Damage size classification of natural fibre reinforced composites using neural network. In: International Conference on Key Engineering Materials (ICKEM 2014), 22-23 March 2014, Bali, Indonesia.

Mohamad Bahtiar , Wahieda (2012) Investigation on the mechanical and physical properties of treated and untreated woven sugar-palm fibre reinforced composite. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohamad Rani, Mohamad Zulfadli (2014) Investigation of stress analysis on coating-substrate interfacial with pre-cracked model. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohamad Yatim, Jamaludin and Tapsir, Siti Hamisah and Mohamed, Zainai Effects of tropical weather on the compression properties of Pultruded GFRP composites. In: Proceedings of the 6th Asia Pacific Structural Engineering and Construction Conference (APSEC 2006), 5-6 September 2006, Kuala Lumpur.

Mohamed, Othman and Yahya, Imran Ariff and Hanid, Mahanim and Mohd Danuri, Mohd Suhaimi and Mohd Nor, Fadhilah and Abd Karim, Saipol Bari (2017) Pengurusan prapembinaan ukur bahan. Penerbit UTHM, Universiti Tun Hussein Onn Malaysia. ISBN 9789670764788

Mohamed Yunus, Mohd Radzi (2009) Discrete element modelling of particulate flow in die filling and powder transfer. PhD thesis, Swansea University.

Mohammad, Noor Shuhada and Adnan, Suraya Hani and Jamellodin, Zalipah and Wan Yusof, Yuslinda (2014) Performance of rice husk ash as a partial cement replacement in fine grained mortar. In: International Integrated Engineering Summit (IIES 2014), 1-4 December 2014, Universiti Tun Hussein Onn Malaysia, Johor.

Mohammad@Chong Mung Hwa, Nona (2012) Mengkaji terma dan sifat-sifat mekanikal siling berpenebat fiber sabut kelapa. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd, Sofian and Bhuiyan, Md. Shahnewaz and Nie, Defu and Otsuka, Yuichi and Mutoh, Yoshiharu (2015) Fatigue strength scatter characteristics of JIS SUS630 stainless steel with duplex S-N curve. International Journal of fatigue . ISSN 0142-1123

Mohd Ali, Ahmad Zurisman (2015) Performance of geopolymer concrete in fire. PhD thesis, Swinburne University of Technology.

Mohd Amin, Azriszul (2007) Analysis of temperature distribution in disc brakes. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Ariff, Azmah Hanim and Ourdjini, Ali and Idris, Siti Rabiatull Aisha and Osman, Saliza Azlina (2015) Thermal cyclic test for Sn-4Ag-0.5Cu solders on high P Ni/Au and Ni/Pd/Au surface finishes. In: International Conference on Mechanical Engineering Research (ICMER), 18-19 August 2015, Kuantan, Pahang.

Mohd Jaini, Zainorizuan and Mokhatar, Shahrul Niza (2014) 2D multi-scale simulation and homogenization of foamed concrete containing rubber bars. In: InCIEC 2014 International Civil and Infrastructure Engineering Conference, 28 September - 1 October 2014, Kota Kinabalu, Sabah, Malaysia.

Mohd Jamail, Nor Akmal and Mohamed Piah, Mohamed Afendi and Muhamad, Nor Asiah and Zainir, R.A. and Kasri, Nur Faizal and Kamarudin, Qamarul Ezani (2013) DC conductivity of polymer nanocomposites for different types and amount of nanofiller. International Journal on Electrical Engineering and Informatics, 5 (2). ISSN 2087-5886

Mohd Jamail, Nor Akmal and Piah, M. A. M. and Muhammad, N. A. and Zainir, R. A. and Kasri, N. F. and Kamarudin, Qamarul Ezani (2013) Polarization and depolarization current measurement of polymer added with nano-particles of silicon oxide for HV insulation. Jurnal Teknologi, 64 (4). ISSN 0127-9696

Mohd Jamail , Nor Akmal and Mohamed Piah , Mohamed Afendi and Muhamad , Nor Asiah and Zainir , Rubiatul Addawiyah and Kasri , Nur Faizal (2013) Effects of SiO2 and TiO2 nanofillers on conductivity level of LLDPE-NR nanocomposite HV insulator. Applied Mechanics and Materials , 284 . pp. 305-309. ISSN 2180-3722

Mohd Nawi, Nazri and Harun, Zawati and Wahid, Noorhaniza (2012) Defective casting diagnosing via an enhanced knowledge hyper-surface method. Applied Mechanics and Materials, 229 . pp. 684-689. ISSN 16627482

Mohd Nor, Mohd Khir and Mohamad Suhaimi, Ibrahim (2014) Effects of temperature and strain rate on commercial aluminum alloy AA5083. Applied Mechanics and Materials, 660 . pp. 332-336. ISSN 1662-7482

Mohd Nor , Mohd Khir (2012) Modelling rate dependent behaviour of orthotropic metals. PhD thesis, Cranfield University.

Mohd Razali, Siti Nooraiin (2013) Instrumented physical model studies of the peat soil engineering structure interaction. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Rosli, Zulkifli and Kwan, Wai Loon and Mohamad Juoi, Jariah and Nayan, Nafarizal and Mahamud, Zainab and Yusuf, Yusliza (2012) Characterization of TiAlBN nanocomposite coating deposited via radio frequency magnetron sputtering using single hot-pressed target. In: International Conference on Advanced Material Engineering & Technology (ICAMET 2012) , 28-30 November 2012, Penang, Malaysia.

Mohd Rosli, Zulkifli and Mahamud, Zainab and Mohamad Juoi, Jariah and Nayan, Nafarizal and Kwan, Wai Loon and Yusuf, Yusliza and Ab Maulod, Hairul Effendy (2012) Corrosion behavior of AZ91 Mg-Alloy coated with AlN and TiN in NaCl and Hank’s solution. In: International Conference on Advanced Material Engineering & Technology (ICAMET 2012) , 28-30 November 2012, Penang, Malaysia.

Mohd Rus, Anika Zafiah and Abdullah, Nur Munirah and Abdullah, Mohammad Faiz Liew (2015) Interconnected interface enhanced electrical properties of graphite in bio-based epoxy from insulating to conductor composites. In: International conference on Green Computing and Engineering Technology (ICGCET) 2015, 25-26 July 2015, Dubai, UAE.

Mohd Rus, Anika Zafiah and Sebayang, Darwin and Abdullah, Khir and Ahmad Zaidi, Ahmad Mujahid and Mohamed Hatta, Mohamed Nasrul (2012) Bio-degradation of polyurethane based on bio-epoxy. Other thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Rus, Shaiqah (2015) Effects of ultra violet irradiation on waste biopolymer based on vibration characterisation, mechanical and physical properties. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Tobi, Abd Latif and Harimon, Mohd Azhar and Ismail, Al Emran and Saad, A. A. and Azalan, A. A. (2013) Investigation on the fretting wear of a coated substrate: interlayer stress behaviour. In: 3rd International Conference and Exhibition on Sustainable Energy and Advanced Material, 30 October 2013, MITC, Melaka. (Unpublished)

Mohd Tobi, Abd Latif and Harimon, Mohd Azhar and Saad, A. A. and Md. Karim, R. (2013) Investigation on the fretting wear of a coated substrate with interlayer. Applied Mechanics and Materials , 315 . ISSN 1660-9336

Mohd Tobi, Abdul Latif and Zaman @ Bujang, Izzuddin and Ismail, Al Emran (2015) A review on carbon nanotubes reinforced ceramic composite. In: International Engineering Research and Innovation Symposium 2015 (IRIS), 12–13 September 2015, Putrajaya, Malaysia.

Mohd Yusak, Mohd Ibrahim and Putra Jaya, Ramadhansyah and Hainin, Mohd Rosli and Wan Ibrahim, Mohd Haziman (2014) A review of microstructure properties of porous concrete pavement incorporating nano silica. In: International Integrated Engineering Summit (IIES 2014), 1-4 December 2014, Universiti Tun Hussein Onn Malaysia, Johor.

Mohd Zaid, Amran and Tei, Wei Xian and Jalani, Jamaludin (2015) Mini robot fingers using shape memory alloy. In: Engineering Technology International Conference 2015, 10-11 August 2015, Kuta, Bali, Indonesia.

Mokhatar, Shahrul Niza and Mohd Jaini, Zainorizuan (2014) An experimental study of reinforced concrete beam with artificial aggregate concrete infill under impact loads. In: InCIEC 2014 International Civil and Infrastructure Engineering Conference, 28 September - 1 October 2014, Kota Kinabalu, Sabah, Malaysia.

Mokhatar, Shahrul Niza and Sonoda, Yoshimi and Fukazawa, Jin (2015) Application of orthotropic constitutive model incorporated with SPH to simulate tensile failure of RC beam. In: 9th Malaysian Technical Universities Conference on Engineering and Technology 2015 (MUCET 2015), 11 – 13 October 2015, Johor Baharu, Malaysia.

Mokhtar, Mardiha (2011) Mechanical properties of soft clay stabilized with cement-rice husks (RH). Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mokhtar, Mardiha and Sahat, Suhaila and Hamid, Baizura and Kaamin, Masiri and Kesot, Mohd Jahaya and Law, Chia Wen and Loo, Yong Xin and Ng, Pei Ling and Sim, Vivian Jia Lei (2015) Application of plastic bottle as a wall structure for green house. In: International Engineering Research and Innovation Symposium 2015 (IRIS), 12–13 September 2015, Putrajaya, Malaysia.

Mokhtar, Mardiha and Sahat, Suhaila and Hamid, Baizura and Kaamin, Masiri and Kesot, M. Jahaya and Law , Chia Wen and Loo , Yong Xin and Ng , Pei Ling and Sim, Vivian Jia Lei (2016) Application of plastic bottle as a wall structure for green house. ARPN Journal of Engineering and Applied Sciences, 11 (12). ISSN 18196608

Mustafa, Mohamed Muftah and Mokhatar, Shahrul Niza and Mohd Jaini, Zainorizuan (2015) Properties of different artificial lightweight aggregates and their effect on concrete strength. In: 9th Malaysian Technical Universities Conference on Engineering and Technology 2015 (MUCET 2015), 11 – 13 October 2015, Johor Baharu, Malaysia.

Mustapa, Mohammad Sukri (2010) Effect of second phase particle on fatigue crack growth behavior in microstructure controlled steels. PhD thesis, Nagaoka University of Technology.

Mustapa, Mohammad Sukri and Sabdin, Saiful Din and Abd Rahim, Erween and Wahab, Md Saidin and Yusof, Yusri (2014) Effect of heat compression on the tensile strength of PALF/sugarcane bagasse for disposable plate. Applied Mechanics and Materials, 660 . pp. 362-366. ISSN 1662-7482

Mustapa, Mohammad Sukri and Sabdin, Saiful Din and Mohd Tobi, Abdul Latif and Wahab, Md Saidin and Mohamed Yunus, Mohd Radzi and Yusof, Yusri (2014) The effects of heat and compression on moisture content and water absorption of PALF/sugarcane bagasse composition in disposable plate production. In: International Integrated Engineering Summit (IIES 2014), 1-4 December 2014, Universiti Tun Hussein Onn Malaysia, Johor.

N

Nagentrau, M. and Siswanto, Waluyo Adi and Mohd Tobi, Abd Latif (2014) Investigation on the effect of linear kinematic hardening model on plasticity prediction of reciprocating sliding contact. In: International Integrated Engineering Summit (IIES 2014), 1-4 December 2014, Universiti Tun Hussein Onn Malaysia, Johor.

Nagentrau, M. and Siswanto, Waluyo Adi and Mohd Tobi, Abd Latif (2014) Investigation on the effect of sliding on plasticity prediction of reciprocating sliding contact with linear kinematic hardening model. In: International Integrated Engineering Summit (IIES 2014), 1-4 December 2014, Universiti Tun Hussein Onn Malaysia, Johor.

Naji, Tammam S. and Othman , Safiah and Raghavan, Vijay R. (2011) Asymptotic CFD study of a plenum chamber in swirling fluid bed. In: International Conference on Mechanical and Manufacturing Engineering 2011 (ICME 2011), 06-07 Jun 2011, Putrajaya.

Narendra Raut, Ashwin and Pathrose Gomez, Christy (2016) Thermal and mechanical performance of oil palm fiber reinforced mortar utilizing palm oil fly ash as a complementary binder. Construction and Building Material, 126 . pp. 476-483. ISSN 0950-0618

Nezere, N. and Ismail, Al Emran (2014) Crushing behaviour of empty steel tubes under oblique. In: International Conference on X-Ray & Related Technique in Research and Industry (ICXRI2014), 11-13 August 2014 , Johor Bahru, Johor.

Nezere, Norhafizan (2016) Analisis penyerapan pembebanan serong terhadap tiub hibrid menggunakan kaedah unsur terhingga. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Nik Ismail, Nik Ainun (2014) Stress intensity factors of edge cracks in dissimilar joint plates. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Nik Yusuf, Nik Alnur Auli (2011) Bio, thermal and photo degradation of polymer thin films from renewable resources. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Noh, Mohamad Zaky and Hussain, Luay Bakir and Ahmad, Zainal Arifin A microstructure study on the Al2O3-Al and Al-Steel Interfaces for Ceramic-Metal Joints via Friction Welding. In: Proceeding of the International Conference on X-rays and Related Techniques in Research and Industry (ICXRI-2006), 29-30 November 2006, Putrajaya.

Noh, Mohamad Zaky and Jamo, Hassan Usman and Ahmad, Zainal Arifin (2014) Effect of temperature and composition of palm oil fuel ash on compressive strength of porcelain. Applied Mechanics and Materials, 660 . pp. 173-177. ISSN 1662-7482

O

Om Balkou , Mhimed Ramadan (2011) Computational study of shear strengthened of RC continuous beam using CFRP sheet with different wrapping scheme. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Osman, Mohamad Hairi and Tami, Hannifah and Abdul Rahman, Nor Azira (2016) A comparison of construction joint ability on concrete slab applied at construction site. ARPN Journal of Engineering and Applied Sciences, 11 (4). ISSN 18196608

P

P.J., Ramadhansyah and M.Y., Mohd Ibrahim and Hainin, Mohd Rosli and M. Warid, M. Naqiuddin and Mohd Haziman , Wan Ibrahim (2014) Porous concrete pavement containing nano-silica: pre-review. In: 4th International Conference on Key Engineering Materials (ICKEM 2014) , 22-23 March 2014, Bali, Indonesia .

Q

Qadir Bux @ Imran Latif, Qadir Bux @ Imran Latif (2012) Critical impact energy for local impact damage of hard projectile on concrete slab. PhD thesis, Universiti Tun Hussein Onn Malaysia.

R

Rafter, M. F. M. and Ahmad, Sufizar and Ibrahim, R. and Hussin, R. (2014) Development of stainless steel (SS316L) foam with different composition using compaction method. In: International Conference on X-Ray & Related Technique in Research and Industry (ICXRI2014), 11-13 August 2014 , Johor Bahru, Johor.

Raut, Ashwin Narendra and Gomez, Christy Pathrose (2017) Development of thermally efficient fibre-based eco-friendly brick reusing locally available waste materials. Construction and Building Materials, 133 . pp. 275-284. ISSN 09500618

Raut, Ashwin Narendra and Pathrose Gomez, Christy (2016) Optimization of mix design of thermally efficient blocks using the process parameter approach. Journal of Materials in Civil Engineering . ISSN 08991561

Raut, Ashwin Narendra and Pathrose Gomez, Christy (2016) Utilization of waste as a constituent ingredient for enhancing thermal performance of bricks – a review paper. Indian Journal of Science and Technology, 9 (37). ISSN 09746846

Razman, Ruzaimah (2012) Thermal performance of residential house using interlocking compressed earth brick (ICEB) as an alternative wall material. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Rejab, Muhammad Nazri (2013) Finite element analysis of mechanical properties for 2D woven Kenaf composite. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Riza, Fetra Venny and Abdul Rahman, Ismail and Ahmad Zaidi , Ahmad Mujahid and Lee, Yee Loon (2012) Effect of soil type in compressed earth brick (CEB) with uncontrolled burnt rice husk ash (RHA). In: International Conference on Advanced Material Engineering & Technology (ICAMET 2012) , 28-30 November 2012, Penang, Malaysia.

Romayne, Anders Hans (2016) A study on single-lap notched woven kenaf reinforced polymer bolted joint under temperature action. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Roslan, Mohd Nazrul and Ismail, Al Emran and Hashim, Mohd Yussni and Zainulabidin, Mohd Hafeez and Khalid, Siti Nor Azila (2014) Modelling analysis on mechanical damage of kenaf reinforced composite plates under oblique impact loadings. Applied Mechanics and Materials , 465 . pp. 1324-1328. ISSN 1660-9336

Roslan, Muhammad Asyraf (2014) Flexural behaviour of fibre reinforced concrete beams containing polyethylene terephthalate (PET) wastes. Masters thesis, Universiti Tun Hussein Onn Malaysia.

S

S.M, Tamizi and A.M. , Mustafa Al Bakri and Kamarudin, H. and C.M. , Ruzaidi and J. , Liyana and Abdul Kadir, Aeslina (2013) Feasibility study on composition and mechanical properties of marine clay based geopolymer brick. In: Advanced Materials Engineering and Technology (ICAMET 2013) , 28-29 November 2013, Bandung, Indonesia .

Sa'ude, Nasuha (2016) Layered manufacturing of polymer matrix composites (PMC) materials via fused deposition modeling (FDM). PhD thesis, Universiti Tun Hussein Onn Malaysia.

Sa'ude, Nasuha and Ibrahim, M. and Ibrahim, M. H. I. (2016) Melt flow rate (MFR) of abs-copper composite filament by fused deposition modeling (FDM). ARPN Journal of Engineering and Applied Sciences, 11 (10). pp. 6562-6567. ISSN 18196608

Sa'ude, Nasuha and Ibrahim, Mustaffa and Ibrahim, Mohd Halim Irwan (2013) Mechanical properties of highly filled iron-ABS composites in injection molding for FDM wire filament. Materials Science Forum, 773 . pp. 448-453. ISSN 0255-5476

Sa'ude, Nasuha and Ibrahim, Mustaffa and Ibrahim, Mohd Halim Irwan and Mohd Amin, Azriszul (2015) Layered manufacturing (LM) of PMC filament by fused deposition modeling (FDM). In: 4th International Conference on Advanced Manufacturing Technology (ICAMT 2015), 20-22 September 2015, Johor Bahru, Malaysia.

Sa'ude, Nasuha and Kamarudin, Khairu and Ibrahim, Mustaffa and Ibrahim, Mohd Halim Irwan (2014) Melt flow index of recycle abs for fused deposition modeling (FDM) filament. In: International Integrated Engineering Summit (IIES 2014), 1-4 December 2014, Universiti Tun Hussein Onn Malaysia, Johor.

Saad, Mohamad Jani and Jalaludin, Zaihan and Kamal, Izran (2010) Effect of dricon in kenaf core particleboard towards on fire performance. Journal of Science and Technology, 3 (1). pp. 1-12. ISSN 1985-8809

Saiman, M. P. and Wahab, Md Saidin and Wahit, Mat Uzir (2014) The effect of fabric weave on tensile strength of woven kenaf reinforced unsaturated polyester composite. In: AAGBS International Conference on Business Management (AiCoBM 2014), 7-8 April 2014, Bayview Beach Resort, Penang Malaysia .

Saiman, Mohd Pahmi (2014) 2 dimenson woven kenaf unsaturated polyester composite. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Saleh, Aslinda and Idris, Mohd Hasbullah (2015) Oxidation of pure aluminium granules during in-situ melting. In: 2nd International Materials, Industrial & Manufacturing Engineering Conference (MIMEC 2015), 4-6 February 2015, Bali Nusa Dua Convention Center, Bali, Indonesia.

Salleh, Ismail (2012) Study on properties of clay brick and CB brick under different heating rates. Other thesis, Universiti Tun Hussein Onn Malaysia.

Sarani, Noor Amira (2014) Properties and environmental impact of recycling cigarette butts (CBs) in fired clay brick. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Saryanto, Hendi (2011) High temperature oxidation behaviour of nanocrystalline Fe80Cr20 alloys and ferritic steel implanted with lanthanum and titanium. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Sebayang, Darwin and Deni S., Khaerudini and Saryanto, H. and Othman, M. A. and Sujitno, T. and Untoro, P. (2011) Effect of nanocrystalline and ti implantation on the oxidation behaviour of Fe80Cr20 alloy and commercial ferritic steel. In: International Conference on Advanced Materials and Computer Science (ICAMCS 2011), 1-2 May 2011, Chengdu, China.

Sebayang, Darwin and Izwana, Maizlinda and Othman, Asraf and Feriyanto, Dafit and Khaerudini, Deni Shidqi and Saryanto, Hendi (2013) New process of developing nanocrytalline fecr for fuel cell application. In: Seminar Hasil Penyelidikan Sektor Pengajian Tinggi Kementerian Pendidikan 2013, 2-3 July 2013, Universiti Utara Malaysia, Kedah.

Shafiq, Nasir and Nuruddin, M Fadhil (2010) Degree of hydration of OPC and OPC/Fly ash paste samples conditioned at different relative humidity. International Journal of Sustainable Construction Engineering & Technology, 1 (1). pp. 47-56. ISSN 2180-3242

Shafiq, Nasir and Nuruddin, Muhd Fadhil and Beddu, Salmia (2010) Properties of concrete containing used engine oil. International Journal of Sustainable Construction Engineering & Technology, 2 (1). pp. 1-11. ISSN 2180-3242

Shahidan, Shahiron and Md Nor, Noorsuhada and Ibrahim, Azmi and Muhamad Bunnori , Norazura and Mat Saliah, Soffian Noor (2011) Relationship between acoustic emission signal strength and damage evaluation of reinforced concrete structure: Case studies. In: 2011 IEEE Symposium on Industrial Electronics and Applications (ISIEA2011), 25 - 28 September 2011, Bayview Hotel Langkawi Malaysia.

Shahidan, Shahiron and Pullin, R. and Holford, K. M. and Muhamad Bunnori , Norazura and Md Nor, Noorsuhada (2013) Quantitative evaluation of the relationship between tensile crack and shear movement in concrete beams. Advanced Materials Research, 626 . pp. 355-359. ISSN 1662-8985

Shahidan, Shahiron and Rhys, Pulin and Muhamad Bunnori , Norazura and Karen, M. Holford (2013) Damage classification in reinforced concrete beam by acoustic emission signal analysis. Construction and Building Material, 45 (2013). pp. 78-86. ISSN 0950-0618

Sheikh Khalid, Faisal (2015) Engineering properties of ring shaped polytheylene terephthalate (RPET) fiber self-compacting concrete. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Sheikh Khalid, Faisal and Juki, Mohd Irwan and Othman, Norzila and Wan Ibrahim, Mohd Haziman (2015) Flexural toughness of ring-shaped waste bottle fiber concrete. In: IConCEES 2015, 01-02 December 2015, Melaka, Malaysia.

Siswanto, W. A. and Nagentrau, M. and Mohd Tobi, A. L. and Tamin, M. N. (2016) Prediction of plastic deformation under contact condition by quasi-static and dynamic simulations using explicit finite element analysis. Journal of Mechanical Science and Technology, 30 (11). pp. 5093-5101. ISSN 1738-494X

Siswanto, Waluyo Adi and Nagentrau, M. and Mohd Tobi, Abd Latif and Tamin, M. N. (2015) Contact pressure prediction comparison using implicit and explicit finite element methods and the validation with hertzian theory. International Journal of Mechanical & Mechatronics Engineering, 15 (6). pp. 1-8. ISSN 2227-2771

Sorrell, Charles (2014) ICXRI '14: advance in quantitative x-ray diffraction analysis of anhydrous and hydrated portland cement. [Video]

Subramaniyan, S Kanna (2013) Mechanical behaviour and energy absorption performances of composite foam-filled circular tubes under axial loadings. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Subramaniyan, S. Kanna and Mahzan, Shahruddin and Ghazali, Mohd Imran and Ahmad Zaidi , Ahmad Mujahid and Prabagaran, Prasath Kesavan (2013) Energy absorption characteristics of polyurethane composite foam-filled tubes subjected to quasi-static axial loading. Applied Mechanics and Materials , 315 . pp. 872-878. ISSN 1660-9336

Sulaeman, Agus and Bakar, Ismail and Suwandi, Amir Khan (2010) The performance evaluation of lightweight concrete piles on UTHM’s soft soil under static and dynamic loading tests. International Journal of Integrated Engineering , 2 (2). pp. 1-13. ISSN 2229-838X

Sulaiman, Suhaizad and Lee, Yee Loon and Koh , Heng Boon and Leong Wu, Ting Water permeability of lightweight aggregate concrete. In: 8th International Conference on Concrete Engineering and Technology (CONCET 2004), 19-21 April 2004, Pulau Langkawi, Kedah.

Sulaiman, Suhaizad (2011) Water permeability and carbonation on foamed concrete. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Sulaiman, Zulkifli (2013) The influence of slag and PSAC on the wear resistance of composite aluminium. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Sulong, Nurulsaidatulsyida and Mohd Rus, Anika Zafiah (2013) Biopolymer-based thermoplastic mixture for producing solid biodegradable shaped bodies and it’s photo degradation stability. In: International Conference on Mechanical Engineering Research (ICMER2013), 1-3 July 2013, Kuantan, Pahang.

Syed Ahmad, Syarifah Nur Aqida (2004) Porosity study and effects on mechanical properties of discontinuous reinforced metal matrix composite (DRMMC). Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Syed Mohamad, Syed Burhanuddin Hilmi (2005) Corrosion assessment on reinforced concrete and its service life prediction. Masters thesis, Universiti Putra Malaysia.

T

T. I., Tuan Noor Hasanah and Wijeyesekera, Devapriya Chitral and Ismail, Bakar and Wahab, Saidin (2013) New lightweight construction material: cellular mat using recycled plastic. In: Advanced Materials Engineering and Technology (ICAMET 2013) , 28-29 November 2013, Bandung, Indonesia .

Taib, Hariati (2009) Synthesis and electrophoretic deposition of tin oxide (Sn02). PhD thesis, University of New South Wales.

Tan, Wee Choon (2008) Characteristics of plates embedded with shape memory alloy wires. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Tan, K. J. and Mahmod, A. and Wahab, M. A. A. and Idris, Maizlinda Izwana and Abdullah, Hasan Zuhudi (2015) Effect of heat treatment on surface morphology of titanium. In: 2nd International Materials, Industrial & Manufacturing Engineering Conference (MIMEC 2015), 4-6 February 2015, Bali Nusa Dua Convention Center, Bali, Indonesia.

Thamizhmanii, Sivaprakasam and Hasan, Sulaiman (2011) Machinability of hard martensitic stainless steel and hard alloy steel by CBN and PCBN tools by turning process. Proceedings of the world Congress on Engineering, 1 (1). pp. 554-559. ISSN 2078-0958

Thamizhmanii, Sivaprakasam and Hasan, Sulaiman (2013) Surface roughness and tool wear on cryogenic treated CBN insert on titanium and Inconel 718 alloy steel. In: International Conference on Production Engineering (ICPE2013), 30-31 May 2013, Tokyo, Japan.

Thamizhmanii, Sivaprakasam and Rajendran, K. and Rasool Mohideen, S. and Sulaiman, Hasan (2012) Investigation on surface integrity on STAVAX ESR AISI 420 martensitic stainless steel by cryogenically treated steel balls with low plastic burnishing tool. Key Engineering Materials, 504 . pp. 1347-1352. ISSN 1662-9795

Thamizhmanii, Sivaprakasam and Rajendran, Punitha and Mohideen, Rasool and Sulaimana, Sulaimana (2012) Performance evaluation of cryogenically treated worn CBN insert by turning process. Key Engineering Materials, 504 . pp. 1323-1328. ISSN 1662-9795

U

Usman Jamo, Hassan (2015) Mechanical properties of ceramics tiles by replacement of quartz by RHA and POFA. PhD thesis, Universiti Tun Hussein Onn Malaysia.

W

Wahab, Md Saidin (2008) Selective laser sintering of polymer nanocomposites. PhD thesis, The University of Leeds.

Wahab, Md Saidin and Dalgarno, K.W. and Cochrane, R. F. (2008) Processing and properties of PA6/MMT clay nanocomposites produced using selective laser sintering. In: International Conference on Mechanical and Manufacturing Engineering 2008 (ICME 2008), 21-23 May 2008, Puteri Pacific Johor Bahru, Johor, Malaysia.

Wahab, Md Saidin and Rahman, N. A. and Mohamed, M. A. S. and Abd Rahim, Erween (2014) Optimization of laser cutting parameters on the laminated carbon fibre reinforced plastics (CFRP) composites using DOE Technique. Applied Mechanics and Materials, 660 . pp. 60-64. ISSN 1662-7482

Wahab, Md Saidin and Rejab, Muhammad Nazri and Saiman, Mohd Pahmi (2014) Analysis of mechanical properties for 2D woven kenaf composite. Applied Mechanics and Materials, 660 . pp. 125-129. ISSN 1662-7482

Wahab, Md Saidin and Wahid, M. U. and Abdul Haq, Reazul Haq (2015) Fused deposition modeling of PCL/HA/MMT biocompatible polymer nano-composites. In: International Conference on Advanced Computational Engineering and Experimenting (ACEX 2015)g, 29 June - 2 July 2015, Munich, Germany.

Wan Ibrahim, Mohd Haziman and Zainal Abidin, Norul Ernida and Jamaluddin, Norwati and Kamaruddin, Kartini and Hamzah, Ahmad Farhan (2015) Bottom ash – potential use in self-compacting concrete as fine aggregate. In: 9th Malaysian Technical Universities Conference on Engineering and Technology 2015 (MUCET 2015), 11 – 13 October 2015, Johor Baharu, Malaysia.

Wan Ibrahim, Mohd Haziman (2004) Water permeability of foamed concrete. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Wan Ibrahim, Mohd Haziman and Hamzah, Ahmad Farhan and Jamaluddin, Norwati and Putra Jaya, Ramadhansyah and Arshad, Mohd Fadzil (2015) Split tensile strength of self-compacting concrete containing coal bottom ash. In: Istanbul University World Conference on Technology, Innovation and Entrepreneurship, 28-30 May 2015, Istanbul, Turki.

Wan Ibrahim, Mohd Haziman and Jamaluddin, Norwati and Juki, Mohd Irwan and P.J., Ramadhansyah and Adnan, Suraya Hani (2014) Compressive and flexural strength of foamed concrete containing polyolefin fibers. In: 4th International Conference on Key Engineering Materials (ICKEM 2014) , 22-23 March 2014, Bali, Indonesia .

Wan Ibrahim, Mohd Haziman and Zainal Abidin, Norul Ernida and Jamaluddin, Norwati and Kamaruddin, Kartini and Hamzah, Ahmad Farhan (2016) Bottom ash – potential use in self-compacting concrete as fine aggregate. ARPN Journal of Engineering and Applied Sciences, 11 (4). ISSN 18196608

Wan Muda, Wan Shaiful Hasrizam (2015) Effect of welding heat input on the microstructure and mechanical properties of abs grade a steel at coarse grain heat affected zone (CGHAZ). Masters thesis, Universiti Tun Hussein Onn Malaysia.

Wan Muhammad, Wan Nur Azrina and Sajuri, Zainuddin and Mutoh, Yoshiharu and Miyashita, Yukio (2011) Microstructure and mechanical properties of magnesium composites prepared by spark plasma sintering technology. Journal of Alloys and Compounds, 509 . ISSN 09258388

Wan Yaakob, Wan Noor Azira and Ismail, Al Emran (2007) Tensile behavior of hybrid natural/glass fibers reinforced composites at different temperatures. In: 1st Engineering Conference on Energy and Environment, 27-28 December 2007, Kuching, Sarawak.

Wan Yusof, Wan Yuslinda and Adnan, Suraya Hani and Jamellodin, Zalipah and Mohammad, Noor Shuhada (2014) Strength development of fine grained mortar containing palm oil fuel ash as a partial cement replacement. In: International Integrated Engineering Summit (IIES 2014), 1-4 December 2014, Universiti Tun Hussein Onn Malaysia, Johor.

Widyastuti, Widyastuti and Kharismawati, Endah and Zainuri, Mochamad and Ardhyananta, Hosta (2013) Microstructure and magnetic properties of barium hexaferrite produced by sol gel auto combustion for radar absorber material (RAM) application. In: 1st International Conference on Mechanical Engineering (iCOME 2013) , 12-14 September 2013, Lombok, Indonesia .

Wong, Kah Leong (2010) Structural behaviour of pre-fabricated composite pad footing foundation using cold-formed steel lipped channel sections. Masters thesis, Universiti Teknologi Malaysia.

Y

Yahya, Siti Asia (2016) Characterizations of Malaysia palf properties between hand scrapping and palf M1. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Yee, See Khee and Sia, Chee Kiong and Mohd Jenu, Mohd Zarar (2013) An exploration to develop concrete walls using MnxZn1-xFe2O4 ferrite as absorbing material to provide defense against electromagnetic pollution. Applied Mechanics and Materials , 315 . pp. 924-928. ISSN 1660-9336

Yeoh, David and Mohamed, Zainai (2002) Strength of structural timber members with finger-joints and metal plate connectors. In: 7th World Conference on Timber Engineering, 2002, Shah Alam Malaysia.

Yong, Tze Mi and Hamzah, E. and Mat Yajid, M. A. (2015) Characterisation of nanocrystalline diamond coating deposited via hot filament chemical vapour deposition method with various seeding methods. Jurnal Teknologi, 75 (7). pp. 51-59. ISSN 2180-3722

Yusof, Yusri and Adam, Anbia (2013) Review on PALF extraction machines for natural fibers. Advanced Materials Research, 781 . pp. 2699-2703. ISSN 1662-8985

Yusof, Yusri and Mat Nawi, Nazuandi and Alias, Muhammad Shazni Hilmi and Adam, Anbia (2015) Pineapple leaf fiber and pineapple peduncle fiber analyzing and characterization for yarn production. ARPN Journal of Engineering and Applied Sciences, 11 (6). pp. 4197-4202. ISSN 18196608

Yusoff, Rosni (2003) Penghasilan e-modul dalam pembangunan kurikulum Kajidaya Bahan di politeknik. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Yusuf, Nur Kamilah and Lajis, Mohd Amri (2013) A new approach of direct recycling of aluminium alloy chips (AA6061) in hot press forging process. Other thesis, Universiti Tun Hussein Onn Malaysia.

Z

Zahari, S.N. and Zakaria, A.A.R. and Sani, M.S.M. and Bujang @ Zaman, Izzuddin (2015) A review on model updating of joint structure for dynamic analysis purpose. In: International Conference on Mechanical Engineering Research (ICMER), 18-19 August 2015, Kuantan, Pahang.

Zahari, W. Z. W. and Badri, R. N. R. L. and M. Nor, Fethma and Kurniawan, D. (2015) Improvement in mechanical properties of ijuk fiber composite by using silane treatment. In: 2nd International Materials, Industrial & Manufacturing Engineering Conference (MIMEC 2015), 4-6 February 2015, Bali Nusa Dua Convention Center, Bali, Indonesia..

Zainal Abidin, M. R. and Jamian, Saifulnizan and Muhd Nor, Nik Hisyamudin (2014) Prediction of energy absorption of Al-based FGM crash box under quasi-static and dynamic loading. Applied Mechanics and Materials, 660 . pp. 557-561. ISSN 1662-7482

Zainal Abidin, Mohamad Rusydi (2014) Pemodelan kotak perlanggaran fungsi bahan bergred berasaskan aluminium untuk rekabentuk perlindung laga. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Zainal Abidin, Norul Ernida and Wan Ibrahim, Mohd Haziman and Jamaluddin, Norwati and Kamaruddin, Kartini and Hamzah, Ahmad Farhan (2014) The effect of bottom ash on fresh characteristic, compressive strength and water absorption of self-compacting concrete. Applied Mechanics and Materials, 660 . pp. 145-151. ISSN 1662-7482

Zainal Abidin, Norul Ernida and Wan Ibrahim, Mohd Haziman and Jamaluddin, Norwati and Kamaruddin, Kartini and Hamzah, Ahmad Farhan (2014) The strength behavior of self-compacting concrete incorporating bottom ash as partial replacement to fine aggregate. In: International Integrated Engineering Summit (IIES 2014), 1-4 December 2014, Universiti Tun Hussein Onn Malaysia, Johor.

Zakaria, M. and Karim, S. R. and Badarulzaman, Nur Azam (2014) XRD analysis of AL-6vol%SnPb composites fabricated by cold forging process with various sintering temperatures. In: International Conference on X-Ray & Related Technique in Research and Industry (ICXRI2014), 11-13 August 2014, Johor Bahru, Johor.

Zakaria, Mohd Zaim (2004) Pembangunan video dokumentari pendidikan bagi mata pelajaran teknologi konkrit. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Zaman, Izzuddin and Araby, Sherif and Khalid , Amir and Manshoor, Bukhari (2014) Moisture absorption and diffusivity of epoxy filled layered-structure nanocomposite. Advances in Environmental Biology, 8 (8). pp. 2626-2631. ISSN 1995-0756

Zaman, Izzuddin and Hsu-Chiang, Kuan and Qingsi, Meng and Andrew , Michelmore and Nobuyuki , Kawashima and Terry , Pitt and Liqun , Zhang and Sherif, Couda and Luong, Lee and Ma, Jun (2012) A facile approach to chemically modified graphene and its polymer nanocomposites. Advanced Function Materials, 22 (13). pp. 2735-3743.

Zaman, Izzuddin and Ismail, Al Emran and Awang, Muhamad Khairudin (2009) Influence of fiber volume fraction on the tensile properties and dynamic characteristics of coconut fiber reinforced composite. Journal of Science and Technology, 1 (1). pp. 55-71. ISSN 1985-8809

Zaman, Izzuddin and Kuan, Hsu-Chiang and Dai, Jingfei and Kawashima, Nobuyuki and Michelmore, Andrew and Sovi, Alex and Dong, Songyi and Luong, Lee and Ma, Jun (2012) From carbon nanotubes and silicate layers to graphene platelets for polymer nanocomposites. Nanoscale, 4 . pp. 4578-4586. ISSN 2040-3364

Zaman, Izzuddin and Le, Quyen-Huyen and Kuan, Hsu-Chiang and Kawashima, Nobuyuki and Luong, Lee and Gerson, Andrea and Ma, Jun (2011) Interface-tuned epoxy/clay nanocomposites. Polymer, 52 (2). pp. 497-504. ISSN 0032-3861

Zaman, Izzuddin and M. Nor, Fethma and Manshoor, Bukhari and Khalid , Amir and Araby, Sherif (2015) Influence of interface on epoxy/clay nanocomposites: 1. Morphology structure. In: International Materials, Industrial, and Manufacturing Engineering Conference (MIMEC), 4-6 February 2015, Bali, Indonesia.

Zaman, Izzuddin and M. Nor, Fethma and Manshoor, Bukhari and Khalid , Amir and Araby, Sherif (2015) Influence of interface on epoxy/clay nanocomposites: 2. Mechanical and thermal dynamic properties. In: International Materials, Industrial, and Manufacturing Engineering Conference (MIMEC), 4-6 February 2015, Bali, Indonesia.

Zaman, Izzuddin and Manshoor, Bukhari and Khalid, Amir and Qingshi, Meng and Araby, Sherif (2014) Interface modification of clay and graphene platelets reinforced epoxy nanocomposites: a comparative study. Journal of Materials Science, 49 (17). pp. 5856-5865. ISSN 1573-4803

Zaman, Izzuddin and Manshoor, Bukhari and Khalid , Amir (2015) Study of vibration absorbers using epoxy reinforced natural fibers. In: International Conference on Applications and Design in Mechanical Engineering 2015, 30-31 March 2015, Georgetown, Penang.

Zaman, Izzuddin and Manshoor, Bukhari and Khalid , Amir and Araby, Sherif (2014) From clay to graphene for polymer nanocomposites-a survey. Journal of Polymer Research, 21 (5). ISSN 1572-8935

Zaman, Izzuddin and Phan, Tam Thanh and Kuan, Hsu-Chiang and Meng, Qingshi and La, Ly Truc Bao and Luong, Lee and Youssf, Osama and Ma, Jun (2011) Epoxy/graphene platelets nanocomposites with two levels of interface strength. Polymer, 52 (7). pp. 1603-1611. ISSN 0032-3861

This list was generated on Sun Aug 20 22:54:40 2017 MYT.