Items where Subject is "T Technology > TA Engineering (General). Civil engineering (General) > TA630-695 Structural engineering (General)"

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Creators | Item Type
Jump to: A | B | C | E | F | G | H | I | J | K | L | M | O | Q | S | W | Y | Z
Number of items at this level: 126.

A

A. Altarhuni., Eyman Ab. (2011) Mechanical and physical properties of clay sand foamed concrete. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ab Rahman, Amera Ratia (2016) Performance of physical shell foundation model under axial loading. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abd Rahman, Norashidah and Tizani, Walid (2013) Fatigue performance of blind bolt in concrete-filled hollow section. Applied Mechanics and Materials , 421 (2013). ISSN 1660-9336

Abd. Ghafar, Nor Hayati (2015) Dynamic behaviour of LVL-concrete composite flooring system. PhD thesis, University of Canterbury, New Zealand.

Abd. Wahab, Izudinshah and Ismail, Lokman Hakim and Abd Kadir, Aslila (2016) Opening design and position effect on building natural stack effect and cross ventilation. International Journal of Engineering and Technical Research (IJETR), 5 (1). ISSN 24544698

Abdul Hamid, Noor Azlina and Ibrahim, Azmi and Thamrin, Rendy and Abdul Hamid, Hanizah (2012) Experimental investigation on the shear behaviour of concrete beams reinforced with GFRP reinforcement bars. In: International Conference on Advanced Material Engineering & Technology (ICAMET 2012) , 28-30 November 2012, Penang, Malaysia.

Abdul Hamid, Noor Azlina and Thamrin, Rendy and Ibrahim, Azmi and Abdul Hamid, Hanizah (2013) Strain distribution on reinforcement of concrete beams reinforced with glass fiber reinforced polymer (GFRP) bars. In: Advanced Materials Engineering and Technology (ICAMET 2013) , 28-29 November 2013, Bandung, Indonesia .

Abdul Rahim, Mustaqqim and Shahidan, Shahiron and Nik Zol, Nik Suharliza (2014) Properties of steel fiber reinforcement concrete with different characteristic of steel fiber. In: International Integrated Engineering Summit (IIES 2014), 1-4 December 2014, Universiti Tun Hussein Onn Malaysia, Johor.

Abdul Rahman, Ismail and Memon, Aftab Hameed and Abdul Azis, Ade Asmi and Abdullah, Nor Hazana (2013) Modeling causes of cost overrun in large construction projects with partial least square-SEM approach: contractor's perspective. Research Journal of Applied Sciences, Engineering and Technology, 5 (6). pp. 1963-1972. ISSN 2040-7467

Abdul Rahman, Ismail and Memon, Aftab Hameed and Abdul Karim, Ahmad Tarmizi (2013) Relationship between factors of construction resources affecting project cost. Modern Applied Science, 7 (1). ISSN 1913-1852

Abdul Rahman, Ismail and Memon, Aftab Hameed and Abdul Karim, Ahmad Tarmizi (2013) Significant factors causing cost overruns in large construction projects in Malaysia. Journal of Applied Science, 13 (2). pp. 286-293. ISSN 1812-5654 (print) / 1812-5662 (online)

Abdul Samad, Abdul Aziz and Mohamad, Noridah and Hail al-Qershi, Mohammed Anwar and Jayaprakash, J. and Mendis, Priyan (2016) Shear mechanism and shear strength prediction of reinforced concrete T-beams. Jurnal Teknologi (Sciences & Engineering), 78 (5). pp. 471-476. ISSN 21803722

Abdul Samad, Abdul Aziz and Siaw Chin, Pang and Trikha, DN and Abang Ali, Abang Abdullah Moment capacity of L-Connections in pcsp construction - An experimental study. Universiti Tun Hussein Onn Malaysia.

Abdul Samad, Abdul Aziz and Ali, Noorwirdawati and Mohamad, Noridah and Hadipramana, Josef and Mohd Bosro, Mohamad Zulkhairi (2016) Theoretical model contribution of CFRP laminates on shear strengthening and repair of RC beams. Jurnal Teknologi (Sciences & Engineering), 78 (5). pp. 79-83. ISSN 21803722

Abdullah, Muhammad A'imullah and Arjmandy, M. R. and Koloor, S. S. R. and K., J. Wong and Tamin, M. N. (2015) Interlaminar damage behavior of CFRP composite laminates under cyclic shear loading conditions. In: 2nd International Materials, Industrial & Manufacturing Engineering Conference (MIMEC 2015), 4-6 February 2015, Bali Nusa Dua Convention Center, Bali, Indonesia.

Abdullah, N.A.Z. and Sani, M.S.M. and Rahman, M.M. and Zaman @ Bujang, Izzuddin (2015) A review on model updating in structural dynamics. In: International Conference on Mechanical Engineering Research (ICMER), 18-19 August 2015, Kuantan, Pahang.

Adnan, Nur Atikah (2015) Non-darcy mixed convection from a horizontal plate embedded in a nanofluld saturated porous medium in the presence of heat source/sink. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ahmad, Hilton @ Mohd Hilton (2016) Stress distribution of secondary ending in single-lap bolted joints with dissimilar joining plates and plate types. Jurnal Teknologi (Sciences & Engineering), 78 (5). pp. 1-7. ISSN 21803722

Ahmad, I. and Goh, W. I. and Samsuddin, Suriyani and Mohamad , Noridah and Rahman, M. H. A. and Abdul Samad, Abdul Aziz (2013) Structural behaviour of precast lightweight foamed concrete sandwich panel (PLFP) with double shear truss connectors under eccentric load: preliminary result. In: 2nd International Conference on Sustainable Materials (ICoSM 2013) , 26-27 March 2013, Penang, Malaysia .

Ahmad, I. and Mohamad , N. Structural behaviour of precast lightweight concrete sandwich panel under eccentric load: an overview. In: The International Conference on Civil and Environmental Engineering Sustainability (IConCEES 2011), 3-5 April 2012, Johor Bahru, Malaysia.

Ahmad, Mohd Hilton (2008) Analisis struktur menggunakan kaedah unsur terhingga. In: Seminar Kebangsaan Matematik dan Masyarakat 2008 , 12-14 Februari 2008, Kuala Terengganu .

Ahmad Puzi, Marliana Azura and Mohamad, Manisah (2007) A study on deformation characteristica of waste glass reinforced hot mix asphalt (HMA). In: Prosiding Kebangsaan Awam 2007, Langkawi Kedah.

Ahmad Zaidi , Ahmad Mujahid and Hadipramana, Josef and Abdul Samad, Abdul Aziz and Mohamad, Noridah (2013) Investigation on impact resistance foamed concrete reinforced by polypropylene fibre. In: Advanced Materials Engineering and Technology (ICAMET 2013) , 28-29 November 2013, Bandung, Indonesia .

Al. Mabrouk Khalifa, Hamza Masaud (2013) Structural behaviour of precast concrete sandwich panel using recycled aggregate concrete under transverse load. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ali, Noorwirdawati (2014) Shear strengthening of pre-cracked and non precracked reinforced concrete continuous beams using bidirectional CFRP strips. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Alnatit, Nabil Mohamed Emhdab (2011) Computational study on shear strengthening of RC continuous beams using CFRP sheet. Masters thesis, Universiti Tun Hussein Onn Malaysia.

B

Budiman, Herdi and Talib, Jamalludin (2010) Prolate spheroidal coordinate: an approximation to modeling Of ellipsoidal drops in rotating disc contractor column. Journal of Science and Technology, 3 (1). pp. 1-10. ISSN 2229-8460

Buhari, Rosnawati and Md Rohani, Munzilah and Abdullah, Mohd Ezree (2013) Dynamic load coefficient of tyre forces from truck axles. Applied Mechanics and Materials, 405 . pp. 1900-1911. ISSN 1662-7482

C

Chai , Teck Jung and Lee , Yee Loon and Tang , Hing Kwong and Koh , Heng Boon Strength behaviours of biomass fiber-reinforced concrete slab. In: The International Conference on Civil and Environmental Engineering Sustainability (IConCEES 2011), 3-5 April 2012, Johor Bahru, Malaysia.

Chan, Chee-Ming and Shamsuddin, Alina and Suratkon, Azeanita (2015) Geo-disasters in relation with climate change : student’s perspective via a course-embedded project. In: Proceedings of the 2015 International Conference on Industrial Engineering and Operations Management (IEOM 2015), 3-5 March 2015, Dubai, United Arab Emirates (UAE).

Che Pa, Mohd Nasir (2015) Analisa tegasan bagi paip fungsi bahan bergred dikenakan bebanan haba. Masters thesis, Universiti Tun Hussein Onn Malaysia.

E

Elmaryami, Abdlmanam S. A. (2014) 1-dimensional transient heat transfer axi-symmetric mathematical modelling to determine lowest hardness point of quenched steel bar. PhD thesis, Universiti Tun Hussein Onn Malaysia.

F

Fragiacomo, Massimo and Deam, Bruce and Yeoh, David (2006) Preliminary test towards earthquake design approach for timber-concrete composite floor system. In: International Training Program for Seismic Design of Structures and Hazard Mitigation, 23 – 27 October 2006, National Center for Research on Earthquake Engineering, Taipei, Taiwan.

Fragiacomo, Massimo and Yeoh, David (2010) Design of timber-concrete composite beams with notched connections. In: Meeting forty-three of the Working Commission W18-Timber Structures, CIB. , 23-26 August 2010, Christchurch, New Zealand.

G

Ghaznavi Oskouei, Amin and Gerami, Mohsen (2010) Study of stiffness effect of panel zone on ductility of RBS joint. International Journal of Sustainable Construction Engineering & Technology, 1 (1). pp. 1-8. ISSN 2180-3242

Goh, Wan Inn (2015) Structural behaviour of precast lightweight foamed concrete sandwich panel (PLFP) with shear truss connectors. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Goh, Wan Inn and Mohamad, Noridah and Abdullah, R. and A. Samad, A. A. (2016) Finite element analysis of precast lightweight foamed concrete sandwich panel subjected to axial compression. Journal of Computer Science & Computational Mathematics, 6 (1).

Goh, Wan Inn and Mohamad, Noridah and Abdullah, R. and Abdul Samad, Abdul Aziz (2016) Overview of empirical equation prediction for ultimate axial load of precast lightweight foamed concrete sandwich panel (PLFP). ARPN Journal of Engineering and Applied Sciences, 11 (4). ISSN 18196608

Goh , Wan Inn and Mohamad, Noridah and Abdullah, R. and A. Samad, A. A. (2016) Overview of empirical equation prediction for ultimate axial load of precast lightweight foamed concrete sandwich panel (PLFP). ARPN Journal of Engineering and Applied Sciences, 11 (4). ISSN 18196608

Guan , Yap Tan and Arshad, Mohd Rizal and Abdul Kadir, Herdawatie (2012) Twin-hull URRG blimp control for low altitude surveillance application. In: International Conference on Intelligent Robotic, Automation and Manufacturing IRAM 2012, 28-30 November 2012, Kuala Lumpur.

H

Hadipramana, Josef and Abdul Samad, Abdul Aziz and Ahmad Zaidi , Ahmad Mujahid and Mohamad, Noridah and Riza, Fetra Venny (2013) Contribution of RHA granules as filler to improve the impact resistance of foamed concrete. In: Advanced Materials Engineering and Technology (ICAMET 2013) , 28-29 November 2013, Bandung, Indonesia .

Harun, Zawati and Gethin, D. T. and Lewis, R. W. (2008) Combined heat and mass transfer for drying ceramic (shell) body. International Journal of Multiphysics, 2 (1). ISSN 17509548

Harun, Zawati and Kamarudin, Ahmad Fahmy and Yunos, Muhamad Zaini (2013) Permeable rice husk fibre shell mould system. Applied Mechanics and Materials, 372 . pp. 331-335. ISSN 16627482

Harun, Zawati and Kamarudin, N. H. and Badarulzaman, Nur Azam and Wahab, Md Saidin (2011) Shell mould composite with rice husk. Key Engineering Materials, 471 . pp. 922-927. ISSN 1662-9795

Harun, Zawati and Kamarudin, N.H and Mohd Taib, Hariati (2013) Effect of rice husk on fired ceramic shell strength. In: 2nd International Conference on Sustainable Materials (ICoSM 2013) , 26-27 March 2013, Penang, Malaysia .

Harun, Zawati and Mohd Nawi, Nazri and Batcha, Mohd Faizal and Gethin, D. T. (2012) Modeling of layering ceramic shell mould. Applied Mechanics and Materials, 232 . pp. 548-552. ISSN 16627482

I

Ibrahim, Izni Syahrizal and Wan Jusoh, Wan Amizah and Mohd Sam, Abdul Rahman and Mustapa, Nur Ain and Sk Abdul Razak, Sk Muiz (2014) The mechanical properties of steel-polypropylene fibre composites concrete (HyFRCC). In: International Integrated Engineering Summit (IIES 2014), 1-4 December 2014, Universiti Tun Hussein Onn Malaysia, Johor.

Ibrahim, Mohd Norihan and Siswanto, Waluyo Adi and Ahmad Zaidi, Ahmad Mujahid (2014) Numerical study of 2024 T3 aluminum plates subjected to impact and perforation. Journal of Mechanical Science and Technology, 28 (11). 4475-4482 . ISSN 1738-494X

Iesa, W. M. and Alferjani, M. B. S. and Ali, Noorwirdawati and Abdul Samad, Abdul Aziz (2010) Study on shear strengthening of RC continuous beams with different CFRP wrapping schemes. International Journal of Integrated Engineering , 2 (2). pp. 1-10. ISSN 2229-838X

Imran, Nik Farhanim (2011) Tensile force and bond stress of longitudinal reinforcemenet in heavily reinforced concrete beam. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ismail, Al Emran (2013) Development of J-integral prediction model for surface cracks in round bars under combined loadings. Applied Mechanics and Materials , 315 . pp. 665-669. ISSN 1662-748

Ismail, Al Emran (2013) Stress intensity factors of three parallel edge cracks under bending moments. In: International Conference on Mechanical Engineering Research (ICMER2013), 1-3 July 2013, Kuantan, Pahang.

Ismail, Ismaaini and Abdul Rahman, Ismail and Memon, Aftab Hameed (2013) Study of factors causing time and cost overrun throughout life cycle of construction project. In: Malaysian Technical Universities Conference on Engineering & Technology (MUCET) , 3-4 December 2013, Kuantan, Pahang.

J

J, Jayaprakash and Abdul Samad, Abdul Aziz and Mohamad, N. and Choong, K.K. and Megat Azmi, M.J. and Badorul, H.A.B. (2010) Effects of GFF bands on normal and high strength concrete cylinders. International Journal of Integrated Engineering, 2 (2). pp. 1-8. ISSN 2229-838X

Jamaluddin, Norwati and Lam, D. and Dai, X. H. and Ye, J. (2013) An experimental study on elliptical concrete filled columns under axial compression. Journal of Constructional Steel Research, 87 . pp. 6-16. ISSN 0143-974X

Jamaluddin, Norwati and Lam, D. and Ye, D. (2011) Finite element analysis of elliptical hollow and concrete filled tube columns. International Journal of Integrated Engineering, 1 (2). pp. 95-101. ISSN 1985-854X

Jayaprakash, J. and Abdul Samad, Abdul Aziz and Ashrabov, A. A and Choong, K.K. (2011) Experimental investigation on shear resistance behaviour of RC precracked and non-precracked T-beams using discrete CFRP strips. International Journal of Integrated Engineering, 1 (2). pp. 1-15. ISSN 1985-854X

Joret, Ariffuddin and Abd Ghani, Sumaiyah and Sulong, Muhammad Suhaimi and Cholan , Noran Azizan and Shafie, Mohd Syafizuddin Stress determination via amylase enzyme using photometer. In: International Conference On Instrumentation, Control & Automation Ica 2009, 20-22 October 2009, Bandung Indonesia.

Juki, Mohd Irwan (2012) Evaluation of shear capacities, behaviour and effects of variation of CFS strength on proposed innovative shear transfer enhancement, bent-up triangular tab shear transfer (BTTST) for CFS-concrete composite beams. Other thesis, Universiti Tun Hussein Onn Malaysia.

Juki, Mohd Irwan and Faisal, S.K. and Othman, Norzila and Wan Ibrahim, Mohd Haziman (2015) Pullout strength of ring-shaped waste bottle fiber concrete. In: International Conference on Civil, Architectural, Structural and Constructional Engineering (ICCASCE 2015), 21-23 August 2015, Dong-A University, South Korea.

Juki, Mohd Irwan and Hanizah, A. H. and Azmi, I. (2009) Test of shear transfer enhancement in symmetric cold-formed steel-concrete composite beams. Journal of Constructional Steel Research, 65 (12). pp. 2087-2098. ISSN 0143-974X (Unpublished)

Juki, Mohd Irwan and Roslan, Muhammad Asyraf and Othman, Norzila and Koh, Heng Boon and Abdul Kadir, Aeslina and M. M. K., Annas and Khalid, Faisal Sheikh (2014) Cracking propagation and pattern behaviour of irregular-shaped polyethylene terephthalate fibre reinforced concrete beam. In: International Integrated Engineering Summit (IIES 2014), 1-4 December 2014, Universiti Tun Hussein Onn Malaysia, Johor.

K

Kamarudin, Noor Hasliza (2012) Reinforcement of rice husk in ceramic shell mould system for investment casting process. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Koh , Heng Boon and Lee, Yee Loon and Yeoh, David (2006) Compressive strength and shrinkage of foamed concrete containing pulverized fly ash. In: 9th International Conference on Concrete Engineering and Technology. , 8-13 May 2006, Kuala Lumpur, Malaysia.

Koh , Heng Boon and Lee, Yee Loon and Yeoh, David (2010) Full-scale load test on reinforced concrete slab. In: World Engineering Congress 2010, 2 – 5 August 2010, Kuching, Sarawak.

Koh , Heng Boon and Mohamad Diah, A.B. and Lee, Yee Loon and Yeoh, David (2008) Experimental study on shear behaviours of timber- lightweight concrete composite shear connectors. In: Brunei International Conference on Engineering and Technology., 2008, Institut Teknologi Brunei, Brunei Darusalam.

L

Lee, Yen Fong (2015) Vibration behaviour of Malaysian rubberwood lvl-concrete composite floor system. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Lee, Yen Fong and Abd Ghafar, Nor Hayati and Abd Rahman, Norashidah and Yeoh, David (2014) Connection performance for LVL-concrete composite floor system. In: International Integrated Engineering Summit (IIES 2014), 1-4 December 2014, Universiti Tun Hussein Onn Malaysia, Johor.

M

Mahadi, Nur Shahreena (2013) Study on precast lighweight foamed concrete sandwich panel (PLFP) connection under flexural load. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Md Jaafar, Mohd Faizal and Mohd Saman, Hamidah and Muhd Sidek, Muhd Norhasri and Ismail, Noorli (2014) Chloride permeability of nanoclayed ultra-high performance concrete. In: InCIEC 2014 International Civil and Infrastructure Engineering Conference, 28 September – 1 October 2014, Kota Kinabalu, Sabah, Malaysia.

Md Noh, Mohammad Soffi and Ahmad, Zakiah and Ibrahim, Azmi (2014) Axial compression behaviour of wallettes constructed using wood-wool cement composite panel. Advanced Materials Research, 1051 . pp. 670-677. ISSN 1022-6680

Md Noor, Nurazuwa (2014) Physical performance and durability evaluation of rubberized concrete. PhD thesis, Kyushu University.

Md Nor, Noorsuhada and Ibrahim, Azmi and Muhamad Bunnori, Norazura and Mohd Saman, Hamidah and Mat Saliah, Soffian Noor and Shahidan, Shahiron (2014) Fatigue crack inspection and acoustic emission characteristics of precast RC beam under repetition. In: InCIEC 2014 International Civil and Infrastructure Engineering Conference, 28 September – 1 October 2014, Kota Kinabalu, Sabah, Malaysia.

Md Salleh, Salihatun (2011) Active intelligent control of vibration of flexible plate structures. PhD thesis, The University of Sheffield.

Memon, Aftab Hameed and Abdul Rahman, Ismail and Abdul Aziz, Ade Asmi (2014) The cause factors of large project's cost overrun: a survey in the southern part of Peninsular Malaysia. International Journal of Real Estate Studies (INTREST), 7 (2).

Memon, Aftab Hameed and Abdul Rahman, Ismail and Abdullah, Mohd Razaki and Abdul Aziz, Ade Asmi (2011) Time overrun in construction projects from the perspective of Project Management Consultant (PMC). Journal of Surveying, Construction and Property (JSCP), 2 (1). ISSN 1985-7527

Memon, Aftab Hameed and Abdul Rahman, Ismail and Zainun, Noor Yasmin and Abdul Karim, Ahmad Tarmizi (2013) Web-based risk assessment technique for time and cost overrun (WRATTCO) – a framework. In: 2nd International Conference on Innovation, Management and Technology Research (ICIMTR 2013) , 22-23 September 2013, Universiti Malaysia Kelantan .

Memon, Aftab Hameed and Rahman, I. A. and Abdul Azis, Ade Asmi (2014) Assessing causal relationships between construction resources and cost overrun using PLS path modelling focusing in southern and central region of Malaysia. Journal of Engineering and Technology, 4 (1). ISSN 2180-3811

Mohamad, Noridah (2010) The structural behaviour of precast lightweight foamed concrete sandwich panel as a load bearing wall. PhD thesis, Universiti Teknologi Malaysia.

Mohamad, Noridah and Khalifa, Hamza and Abdul Samad, Abdul Aziz and Mendis, Priyan and Goh, Wan Inn (2016) Structural performance of recycled aggregate in CSP slab subjected to flexure load. Construction and Building Materials, 115 . pp. 669-680.

Mohamad Noor , Noraishah (2011) Prediction of springback in the forming of advanced high strength steel: simulation and experimental study. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd, Sabarudin (2015) IConCEES 2015: sustainability in built environment: green building index (GBI) platinum certification - UCTS experience. [Video]

Mohd Ali, Ahmad Zurisman (2005) The effect of eccentricity at beam support to beam stiffness. Masters thesis, Universiti Teknologi Malaysia.

Mohd Ali, Ahmad Zurisman and Jay Sanjayan, Jay Sanjayan and Maurice Guerrieri, Maurice Guerrieri Spalling of full-scale high strength concrete wall panels with difference aggregate sizes. In: Talent Management Symposium (TMS 2012) , 11-12 July 2012, Australia.

Mohd Bukari, Saifullizan and Subramani, Devraj Kenneth (2007) Landslide prediction by determine the potential hazardous location using GPS mapping. In: Persidangan Kebangsaan AWAM '07, 29-31 Mei 2007, Langkawi, Kedah.

Mohd Irwan, Juki and Hanizah, A. H. and Azmi, I. and Koh , Heng Boon (2011) Large-scale test of symmetric cold-formed steel (CFS)-concrete composite beams with BTTST enhancement. Journal of Constructional Steel Research, 67 (4). pp. 720-726. ISSN 0143-974X (Unpublished)

Mohd Rus, Anika Zafiah and Mohid, S.R. and Nurulsaidatulsyida, S. and Marsi, N. (2013) Biopolymer doped with titanium dioxide superhydrophobic photocatalysis as self-clean coating for lightweight composite. Journal of Advanced of Materials and Engineering, 2013 . ISSN 1687-8442

Mohd Yusof, Khairul Nizar and Arsyad, Abdul Kaharudin Effects of electro osmotic consolidation on South West of Johor: small laboratory scale. In: The International Conference on Civil and Environmental Engineering Sustainability (IConCEES 2011), 3-5 April 2012, Johor Bahru, Malaysia.

Mohd Zahari, Nooraini and Abdul Rahman, Ismail and Ahmad Zaidi, Ahmad Mujahid (2009) Foamed concrete: potential application in thermal insulation. In: Malaysian Technical Universities Conference on Engineering and Technology (MUCEET 2009), 20-22 June 2009, Kuantan, Pahang.

Mohd Zuki, Sharifah S. and K., K. Choong and Jayaprakash, J. and Shahidan, Shahiron (2014) Behavior of fire exposed concrete-filled double skin steel tubular (CFDST) columns under concentric axial loads. In: International Integrated Engineering Summit (IIES 2014), 1-4 December 2014, Universiti Tun Hussein Onn Malaysia, Johor.

Mohd Zuki, Sharifah Salwa and Choong, Kok Keong and Jayaprakash, J. and Shahidan, Shahiron (2015) Effect of diameter on fire exposed concrete-filled double skin steel tubular (CFDST) columns under concentric axial loads. In: AWAM International Conference on Civil Engineering 2015 (eco-AICCE 2015), 9-11 September 2015, Kuala Lumpur, Malaysia.

Mokhtar, Norfaniza (2011) Shear strength analysis of concrete beams reinforced with GFRP bars using strut and tie model. Masters thesis, Universiti Tun Hussein Onn Malaysia.

O

Osman, Mohamad Hairi (2012) Performance of reinforced concrete beam-column joint subjected to repeated reversed load. Other thesis, Universiti Tun Hussein Onn Malaysia.

Q

Qadir Bux @ Imran Latif, Qadir Bux @ Imran Latif (2012) Critical impact energy for local impact damage of hard projectile on concrete slab. PhD thesis, Universiti Tun Hussein Onn Malaysia.

S

Sabtu, Hilyati and Stewart, Mark G. Reliability analysis and life cycle costing of rehabilitation strategies for RC structures exposed to marine environment. In: Talent Management Symposium (TMS 2012) , 11-12 July 2012, Australia.

Saleh, Abd Latif and Abu Bakar, Suhaimi and Mohamed, Zainai and Khin , Maung Zaw Ultimate strength prediction of DRM timber beams by plastic approach: experimental results and discussions. In: Proceedings of the 6th Asia Pacific Structural Engineering and Construction Conference (APSEC 2006), 5-6 September 2006, Kuala Lumpur.

Samsuddin, Suriyani and Mohamad, Noridah Structural behaviour of precast lightweight foamed concrete sandwich panel under axial load: an overview. In: The International Conference on Civil and Environmental Engineering Sustainability (IConCEES 2011), 3-5 April 2012, Johor Bahru, Malaysia.

Samsuddin, Suryani (2015) The structural performance of precast lightweight foamed concrete panel (PLFP) with double shear connectors. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Shahidan, Shahiron and Bunnori, N. Muhamad and Md Nor, N. and Abd Rahim, M. and Abdullah, S. R. and Mohd Zuki, S. S. (2014) Analysis improvements of acoustic emission data in evaluation of concrete beam. In: International Integrated Engineering Summit (IIES 2014), 1-4 December 2014, Universiti Tun Hussein Onn Malaysia, Johor.

Shahidan, Shahiron (2009) Behavior of steel fiber reinforced concrete slab due to volume fraction of fiber. Masters thesis, Universiti Putra Malaysia.

Suki , Nauwal (2011) Flexural analysis of concrete beams longitudinally reinforced with GFRP bars using discrete element model. Masters thesis, Universiti Tun Hussein Onn Malaysia.

W

Wan Ibrahim , M.H and Abu Bakar , B. H and Megat Johari , M. A and Ramadhansyah , P. J and Mohd Fadzil , A Elasticity and moisture movement of calcium silicate brick under sulphate environment. In: The International Conference on Civil and Environmental Engineering Sustainability (IConCEES 2011), 3-5 April 2012, Johor Bahru, Malaysia.

Y

Yabi, Shurl (2016) Analysis of vibration criteria on reinforced concrete floor due to footfalls and passing vehicles. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Yeoh, David (2008) Timber-concrete composite connections and beams. In: 7th FIB Ph.D. Symposium. , 11-13 September 2008, Stuttgart, Germany.

Yeoh, David and Fragiacomo, M. and Deam, B. (2011) Experimental behaviour of LVL-concrete composite floor beams at strength limit state. Engineering Structures, 33 (9). pp. 2697-2707. ISSN 0141-0296 (Unpublished)

Yeoh, David and Fragiacomo, Massimo (2012) Long-term behaviour of LVL-concrete composite floor beams. In: 12th World Conference on Timber Engineering. , July 15-19, 2012, Auckland, New Zealand.

Yeoh, David and Fragiacomo, Massimo (2012) The design of a semi-prefabricated LVL-concrete composite floor. Advances in Civil Engineering . ISSN 1687-8086

Yeoh, David and Fragiacomo, Massimo and Abd Ghafar, Nor Hayati and Buchanan, Andy and Deam, Bruce and Crews, Keith (2008) LVL-concrete composite floor systems: an effective solution for multi-storey timber buildings. In: Australasian Structural Engineering Conference. , 26-27 June 2008, Melbourne, Australia.

Yeoh, David and Fragiacomo, Massimo and Aldi, Pietro and Mazzilli, Marta and Kuhlmann, Ulrike (2008) Performance of notched coach screw connection for timber-concrete composite floor system. In: 10th World Conference on Timber Engineering. , 2-5 June 2008, Miyazaki, Japan.

Yeoh, David and Fragiacomo, Massimo and Buchanan, Andy and Crews , Keith and Haskell, Jenny and Deam, Bruce (2008) Development of semi-prefabricated timber-concrete composite floors in Australasia. In: 10th World Conference on Timber Engineering. , 2-5 June 2008, Miyazaki, Japan.

Yeoh, David and Fragiacomo, Massimo and Buchanan, Andy and Deam, Bruce (2009) Experimental behaviour at ultimate limit state of a semi-prefabricated timber-concrete composite floor system. In: Timber Structures from Antiquity to the Present International Symposium. , June 2009, Istanbul, Turkey.

Yeoh, David and Fragiacomo, Massimo and Buchanan, Andy and Deam, Bruce (2010) Experimental performance of LVL-concrete composite floor beams. In: 11th World Conference on Timber Engineering., 20-24 June 2010, Riva del Garda, Trentino, Italy.

Yeoh, David and Fragiacomo, Massimo and Buchanan, Andy and Gerber, Christopher (2009) Preliminary research towards a semi-prefabricated LVL-concrete composite floor system for the Australasian market. Australasian Journal Structural Engineering, 9 (3). pp. 225-240. ISSN 1328-7982

Yeoh, David and Fragiacomo, Massimo and Carradine, David (2013) Fatigue behaviour of timber-concrete composite connections and floor beams. Engineering Structures, 56 . pp. 2240-2248.

Yeoh, David and Fragiacomo, Massimo and De Franceschi, Mary and Buchanan, Andy (2011) Experimental tests of notched and plate connectors for LVL-concrete composite beams. Journal Structural Engineering ASCE, 137 (2). pp. 261-269. ISSN 0733-9445

Yeoh, David and Fragiacomo, Massimo and De Francheschi, Mary and Koh , Heng Boon (2011) The state-of-the-art on timber-concrete composite structures – a literature review. Journal of Structural Engineering . ISSN 0733-9445/2011/10-1085–1095

Yeoh, David and Fragiacomo, Massimo and Deam, Bruce (2011) Experimental behavior of LVL-concrete composite floor beams at strength limit state. Engineering Structures Elsevier, 33 (9). pp. 2697-2707.

Yeoh, David and Koh , Heng Boon and Lee, Yee Loon (2005) Reinforced concrete design: a problem and solution approach. McGrawHill Education Asia.

Yeoh, David and Koh , Heng Boon and M Noor, Wahida (2003) Development of basic working loads for metal plate connected timber joints. In: Conference IPTA, September 2003, PWTC, Kuala Lumpur.

Yeoh, David and Koh , Heng Boon and Malini, Diana (2005) Derivation of mechanical properties of rubberwood laminated veneer lumber. In: National Civil Engineering Conference, December 2005, Johor Malaysia.

Yeoh, David and Koh , Heng Boon and Zamzuri, Fazaliana (2005) Flexural strength of timber-lightweight concrete composite beam. In: Brunei international Conference on Engineering and Technology 20Q5 (BICET 2005), 15-17 August 2005, Brunei.

Yeoh, David and M Sani, Abdul Rahim and Tan, Yu Eng (2002) Load displacement parameters of metal plate connection in Kempas and Meranti. In: 7th World Conference on Timber Engineering, 2002, Shah Alam Malaysia.

Yeoh, David and Mohamed, Zainai (2002) Strength of structural timber members with finger-joints and metal plate connectors. In: 7th World Conference on Timber Engineering, 2002, Shah Alam Malaysia.

Yeoh, David and Shakri, Ahmad and Tan, Yu Eng (2004) Effect of metal plate connected joints on strength properties of rubberwood laminated veneer lumber. In: 8th World Conference on Timber Engineering. , June 2004, Lahti, Finland.

Yeoh, David Eng Chuan (2012) Experimental-numerical comparisons of timber-concrete composite floors tested under short-term loading. Other thesis, Universiti Tun Hussein Onn Malaysia.

Z

Zakaria, Muhammad Nizam and H., Obiya and K., Ijima and Ahmad Tajuddin, Saiful Azhar (2014) A comparison for the simulation of frictionless contact problem with large displacement. In: International Integrated Engineering Summit (IIES 2014), 1-4 December 2014, Universiti Tun Hussein Onn Malaysia, Johor.

This list was generated on Thu Sep 21 16:58:37 2017 MYT.