Items where Subject is "T Technology > TH Building construction > TH845-895 Architectural engineering. Structural engineering of buildings"

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Creators | Item Type
Jump to: A | B | I | K | L | M | N | O | R | S | T | W | Y | Z
Number of items at this level: 34.

A

Abubakar, Musa Alkali (2015) Assessment of international students’ experience on attributes of physical facilities provision at UTHM residential colleges. Masters thesis, Universiti Tun Hussein Onn Malaysia.

B

Benayoune, A. and Abdul Samad, Abdul Aziz and Trikha, D.N. and Abang Ali, Abang Abdullah and Monayem Akhand, A. Precast reinforced concrete sandwich panel as an industrialised building system. In: 8th International Conference on Concrete Engineering and Technology (CONCET 2004), 19-21 April 2004, Pulau Langkawi, Kedah.

Buyung, Mohd Reduan and Shafii, Haryati and Yusoff, Noor Ain (2018) Transformasi ke arah konsep kolej kediaman lestari di universiti awam Malaysia. Journal of Advanced Research in Social and Behavioural Sciences, 11 (1). pp. 34-49. ISSN 24621951

I

Ibrahim, A. and Ibrahim, Z. and Kamarudin, Ahmad Fahmy and Daud, Mohd Effendi (2015) Empirical filtering method for natural frequencies evaluation of low rise reinforced concrete school building using ambient vibration approach. In: International Conference on Civil, Architectural, Structural and Constructional Engineering (ICCASCE 2015), 21-23 August 2015, Dong-A University, South Korea.

Ismail, Lokman Hakim and Sibley, Magda and Abdul Wahab, Zudinshah and Elgadi, Ahmed A. (2016) Layout design and users’ perception of different types of high-rise office buildings in Malaysia. Advanced Engineering Forum, 18 . pp. 80-93. ISSN 2234991X

K

Kamarudin, A. F. and Mokhatar, S. N. and Zainal Abidin, M. H. and Daud, M. E. and Rosli, M. S. and Ibrahim, A. and Ibrahim, Z. and Md Noh, M. S. (2017) Structural health monitoring on medium rise reinforced concrete building using ambient vibration method. In: 4th International Conference on Civil and Environmental Engineering for Sustainability (IConCEES 2017), 4–5 December 2017, Langkawi, Malaysia.

Kamarudin, A. F. and Zainal Abidin, M. H. and Mokhatar, S. N. and Daud, M. E. and Ibrahim, A. and Ibrahim, Z. and Md Noh, M. S. (2017) Identification of natural frequency of low rise building on soft ground profile using ambient vibration method. In: International Seminar on Mathematics and Physics in Sciences and Technology 2017 (ISMAP 2017), 28–29 October 2017, Hotel Katerina, Malaysia.

Kasim, Rozilah and Umar, Muhammad Akilu and Ishak, Mohd Hafizal and Md Ariffin, Khadijah (2018) Framework development to identify the impact of green building attributes on rental value of commercial properties in Malaysia. Advanced Materials Research, 24 (5). pp. 3229-3233. ISSN 19366612

Kasmin, Hartini and Baharuddin, Sitinurr Hidayu and Abd Aziz, Ahmad Afdhal and Sharif, Nur Durrah (2017) Evapotranspiration performance of green roof system using different types of local vegetation. In: Water and Environmetal Issues. Penerbit UTHM, pp. 90-106. ISBN 9789672110545

Khairi, Supar and Ahmad, H. (2018) Strength predictions of multi-bolted joints in woven fabric kenaf composite plates with different configurations using Xfem frameworks. Trends in Textile Engineering & Fashion Technology, 2 (3). pp. 1-10. ISSN 25780271

L

Lee, S. Y. and Ahmad, H. (2018) Woven fabric carbon fibre composites hybrid joints under quasi-static testing. Journal of Advanced Manufacturing Technology, 12 (1). pp. 13-24. ISSN 22898107

M

Mahmod, Ali Abdul-Wadoud and Mohd, Sabarudin and Mohd Masirin, Mohd Idrus and Ahmad Tajuddin, Saiful Azhar and Bakar, Ismail and Zainorabidin, Adnan and Kifli, Azrul Zulwali and Ling, Jen Hua (2016) Construction of buildings on peat: case studies and lessons learned. In: The 3rd International Conference on Civil and Environmental Engineering for Sustainability (IConCEES 2015) , 1-2 December 2015, Melaka, Malaysia.

Mohamad, Nur Suriya (2013) A study of energy efficiency opportunities in Putrajaya Maritime Centre towards green building. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Azaman, N. A. and Abd Ghafar, N. H. and Azhar, A.F. and Fauzi, A. A. and Ismail, H. A. and Syed Idrus, S. S. and Mokhjar, S. S. and Abd Hamid, F. F. (2018) Investigation of concrete floor vibration using heel-drop test. IOP Conference Series: Journal of Physics: Conference Series, 995 (012027). pp. 1-8. ISSN 17426596

Mohd Thahrir, Muhamad Hafizi (2016) Attibutes of green building rating tool (GBRT) for Malaysia. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Turan, Faiz (2013) A three-stage methodology for design evaluation in product development. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Mokhatar, S. N. and Sonoda, Y. and Kamarudin, A. F. and Md Noh, M. S. and Tokumaru, S. (2017) The effects of pressure dependent constitutive model to simulate concrete structures failure under impact loads. In: International Seminar on Mathematics and Physics in Sciences and Technology 2017 (ISMAP 2017), 28–29 October 2017, Hotel Katerina, Malaysia.

Mokhatar, S. N. and Sonoda, Y. and Zuki, S. S. M. and Kamarudin, A. F. and Md Noh, M. S. (2017) Simulation of shear and bending cracking in RC beam: material model and its application to impact. In: 4th International Conference on Civil and Environmental Engineering for Sustainability (IConCEES 2017), 4–5 December 2017, Langkawi, Malaysia.

Musa, Mohd Kamaruzaman and Abdul Rahman, Mohammad Ashraf and Akasah , Zainal Abidin and Ahmad Jeni, Mohamad Luthfi and Sanik, Mohd Erwan (2013) The demographic trends of maintenance personnel of heritage buildings in Malaysia: an analysis. In: International Conference on Engineering and Built Environment 2013 (ICEBE13'), 19-20 November 2013, Universiti Kebangsaan Malaysia, Bangi.

N

Ng, Ban-Huat and Akasah, Zainal Abidin (2013) Post occupancy evaluation of energy-efficient buildings in tropical climates – Malaysia. International Journal of Architectural Research, 7 (2). pp. 8-21. ISSN 19387806

O

Osman, Mohamad Hairi and Abd Shukor, Mohamad Nur Mustaqim and Adnan, Suraya Hani and Ahmad Jeni, Mohamad Luthfi and Abdullah, Mohd Sufyan and Salim, Salman and Tami, Hannifah and Abdul Rahman, Nor Azira (2017) Comparison of pigtail with J anchor bolt in normal concrete. In: Malaysia Technical Universities Conference on Engineering and Technology (MUCET 2017), 6-7 December 2017, Park Royal Hotel, Penang, Malaysia.

R

Russell, Stanley (2010) Evolution of the American Zero Energy House. International Journal of Sustainable Construction Engineering & Technology, 1 (1). pp. 1-10. ISSN 2180-3242

S

Sarpin, Norliana and Mat Ali, Nurul Hafizah (2017) Perlaksanaan kuarters pekerja berpusat (CLQ) di projek Mass Rapid Transit (MRT). In: Impak Pengurusan Pembinaan Terhadap Persekitaran. Dewan Bahasa dan Pustaka, pp. 1-25. ISBN 9835203598

Sarpin, Norliana and Yang, Jay The promotion of sustainability agenda for facilities management through people capabilities. In: Talent Management Symposium (TMS 2012) , 11-12 July 2012, Australia.

Supar, Khairi and Ahmad, Hilton (2016) XFEM modelling of multi-holes plate with single-row and staggered holes configurations. In: International Symposium on Civil and Environmental Engineering 2016, 5-6 December 2016, Novotel Melaka.

Suratkon, Azeanita and Chan, Chee-Ming and Jusoh, Safuan (2016) Indicators for measuring satisfaction towards design quality of buildings. International Journal of GEOMATE, 11 (24). pp. 2348-2355. ISSN 21862990

T

T. Chik, T. N. and Kamil, M. R. H. and Yusoff, N. A. (2017) Vibration analysis of beam and block precast slab system due to human vibrations. In: International Seminar on Mathematics and Physics in Sciences and Technology 2017 (ISMAP 2017), 28–29 October 2017, Hotel Katerina, Malaysia.

T. Chik, T. N. and Kamil, M. R. H. and Yusoff, N. A. (2017) Vibration analysis of beam and block precast slab system due to human vibrations. In: International Seminar on Mathematics and Physics in Sciences and Technology 2017 (ISMAP 2017), 28–29 October 2017, Hotel Katerina, Malaysia.

T. Chik, T. N. and Kamil, M. R. H. and Yusoff, N. A. and Ibrahim, M. H. W. (2017) Dynamic analysis of an office building due to vibration from road construction activities. In: International Seminar on Mathematics and Physics in Sciences and Technology 2017 (ISMAP 2017), 28–29 October 2017, Hotel Katerina, Malaysia.

W

Wan Nazri, W. M. H. and Guntor, N. Anting and Lim, A. J. M. S. and Prasetijo, J. and Shahidan, S. and Md Din, M. F. and Mohd Anuar, M. A. (2017) Alternative design of pipe sleeve for liquid removal mechanism in mortar slab layer. In: Global Congress on Construction, Material and Structural Engineering 2017 (GCoMSE2017), 28–29 August 2017, Johor Bahru, Malaysia.

Wijeyesekera, Devapriya Chitral and Wooi, Eric Kee Loh and Lim, Alvin John Meng Siang (2017) Sustainable hydraulic barrier design technologies for effective infrastructure engineering. MATEC Web of Conferences, 103 (04022). pp. 1-9. ISSN 2261236X

Wijeyesekera, Devapriya Chitral and Wooi , Eric Kee Loh and Lim, Alvin John Meng Siang (2016) Sustainable hydraulic barrier design technologies for effective infrastructure engineering. In: International Symposium on Civil and Environmental Engineering 2016 (ISCEE 2016), 5-6 December 2016, Melaka, Malaysia.

Y

Yasin, Mohd Norazam and Abdullah, Abd Halid and Yunus, Riduan and Abdul Khalid, Hafizah and Wahab, Nur Shahirah Nadhilah (2016) Potential retrofit of Universiti Tun Hussein Onn Malaysia existing building towards green building. The Social Sciences, 11 (11). pp. 2726-2731. ISSN 18185800

Z

Zulkiffli, Noorul Adharina and Ahmad Latiffi, Aryani (2016) Theoretical review on sustainable leadership (SL). MATEC Web of Conferences, 66 (00045).

This list was generated on Mon Sep 16 11:59:25 2019 MYT.