Items where Subject is "T Technology > TJ Mechanical engineering and machinery > TJ1-162 Mechanical engineering and machinery"

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Creators | Item Type
Jump to: | A | D | E | G | H | I | J | K | L | M | N | O | R | S | T | Y | Z
Number of items at this level: 51.

Abdullah, Hasan Zuhudi (2004) Reformulation of hydroxyapatite with ZnO. In: 2n D Colloquium On Postgraduate Research, National Postgraduate Colloquium On Materials, Minerals And Polymer 2004 (MAMIP 2004), Hotel Vistana Penang.

Othman , Safiah and Nordin, Normayati and A. Wahab, Abas and R. Raghavan, Vijay (2011) Experimental study of flow in a plenum chamber of a swirling fluid bed. In: 2nd International Conference on Mechanical Engineering (ICME 2011) , 6-7 June 2011, Putrajaya.

A

Ahmad Zaidi , Ahmad Mujahid and Md Yusof, Mohammad Zainal and Ghazali, Mohd Imran and Mohammad, Mahmod Abd Hakim Simulation model for penetration of rigid body to 6061-T6511 alumintrm targets. Universiti Tun Hussein Onn Malaysia.

Alias, Maizam and M. Saleh, Hasanul H (2007) The effect of the blended Problem-Based Learning method on the acquisition of content-specific knowledge in mechanical engineering. World Transactions on Engineering and Technology Education, 6 (2). pp. 249-252. ISSN 1446-2257

Alimi, Zainal Abidin (2015) The auto assist bar system for disabled people. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Anggono, Agus Dwi and Siswanto, Waluyo Adi and Omar, Badrul (2012) Algorithm development and dpplication of spring back compensation for sheet metal forming. Research Journal of Applied Sciences, Engineering and Technology, 4 (14). pp. 2036-2045. ISSN 2040-7467

Anggono, Agus Dwi and Siswanto, Waluyo Adi and Omar, Badrul (2013) Springback prediction compensation and optimization for front side member in sheet metal forming using fem simulation. Advanced Materials Research, 789 . pp. 436-442. ISSN 1662-8985

Asmayou, Ali.H. (2014) Simulation of palm oil and methanol mixing in stirred tank by implement a normal and fractal baffles. Masters thesis, Universiti Tun Hussein Onn Malaysia.

D

Darmawan, Agung Setyo and Siswanto, Waluyo Adi and Sujitno, Tjipto (2013) Comparison of commercially pure titanium surface hardness improvement by plasma nitrocarburizing and ion implantation. Advanced Materials Research, 789 . pp. 347-351. ISSN 1662-8985

Darmawan, Agung Setyo and Siswanto, Waluyo Adi and Sujitno, Tjipto (2013) The influence of plasma nitrocarburizing process temperature to commercially pure titanium surface hardness. Applied Mechanics and Materials, 315 (4). pp. 700-704. ISSN 1660-9336

E

Edukali Shibani, Wanis Mustafa and Zulkafli, Mohd Fadhli and Basuno, Bambang and Abdul Wahab, Abas (2016) Numerical analysis of a moving object in the air tunnel. International Journal of Mechanical & Mechatronics Engineering IJMME, 16 (03). pp. 72-78. ISSN 162503-7474

G

Ghazali, Mohd Hafiz and Zaman @ Bujang, Izzuddin (2016) New design of tuned vibration absorber for wide frequency range application. ARPN Journal of Engineering and Applied Sciences, 11 (8). ISSN 18196608

Ghazali, Rozaimi and Md Sam, Yahaya and Rahmat, Mohd Fua'ad and Hanafi, Dirman and Zulfatman, Zulfatman (2012) Two-degree-of-freedom Robust Control for a Non-minimum Phase Electro-hydraulic System. In: 24th Chinese Control and Decision Conference (CCDC), 23 - 25 May 2012, Taiyuan, China.

H

Hariri , Azian and Nordin, Normayati and Ismail, Abd. Rahman (2010) Study of secondhand smoke pollutant concentration in car. In: World Engineering Congress 2010, 2 – 5 August 2010, Kuching, Sarawak.

Hasnan, Khalid and Saesar, Luhur Budi and Yudhistira, Prima Adhi (2012) A size-bed wheelchair design manufacture with scaled prototype and kinematic-virtual reality model simulation. Advanced Materials Research, 488 . pp. 1207-1212.

Hassan, N. H and Mohd. Zain , N. and Wahab, M. S. and Ibrahim , Mustafa Fabrication of MMC material for EDM electrode. Proceedings of 2009 Student Conference on Research and Development (SCOReD 2009) .

I

Ibrahim, Mohd Norihan and Siswanto, Waluyo Adi and Ahmad Zaidi , Ahmad Mujahid (2013) Computational issues in the simulation of high speed ballistic impact: a review. Applied Mechanics and Materials , 315 (4). pp. 762-767. ISSN 1660-9336

J

Jaafar, Mohd Isa (2001) Amalan keselamatan di bengkel kerja kayu Kejuruteraan Awam (sat tinjauan di Politeknik Ungku Omar, Politeknik Port Dickson dan Politeknik Shah Alam. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

K

Kamarudin, Kamarul-Azhar and Mohamad Sazali, Nor Shahida Akma and Mohd Ali, Mas Fauzi and Alimin, Ahmad Jais and Abdullah Khir, Saffiah Performance of diesel engine using blended crude jatropha oil. In: 10th Asian International Conference On Fluid Machinery, 21-23 October 2009, Kuala Lumpur Malaysia.

Universiti Tun Hussein Onn Malaysia (2015) Turbine ventilator with an auxiliary wind-powered fan. MY - 155957 - A.

Khalid , Amir and Manshoor, Bukhari and Alimin, Ahmad Jais and Mustafa, Norrizal and Basharie , Siti Mariam and Sadikin, Azmahani (2014) Performance and Emission of a Diesel Engine Fuelled With Preheated Palm Oil Biodiesel under High Load Conditions. Advanced Materials and Research Vols. 845 (2014), 845 . pp. 61-65.

L

Lim , Boon Ping (2002) Mengenalpasti masalah dalam pembelajaran amali PLC (Programmable Logic Controller) di KUiTTHO. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

M

Md Salleh, Salihatun and Yahya, Musli Nizam and Ghazali, Mohd Imran and Low, Choi San (2007) A study on comfortness fiber car seat. In: Regional Conference on Engineering Mathematics, Mechanics, Manufacturing and Architechture , 27th-28th November 2007, Putrajaya.

Md Salleh, Salihatun and Tokhi, Osman Active vibration control on flexible plate structure using bio-inspired algorithm. 2011 Third International Conference on Computational Intelligence, Modelling & Simulation .

Mohamad, Mahmod Abd Hakim and Shebli, M. S. and Shah, A. S. M. and Hamdani, M. A. and Shamsulbahri, W. S. W. and Kaamin, Masiri and Aziz, A. R. A. (2015) Rekabentuk mesin pengering mee siput dual automatik. In: Prosiding Persidangan Antarabangsa Kelestarian Insan Kali Ke-2 2015, 19-20 October 2015, Seremban, Negeri Sembilan.

Mohamed Abdel Aziz, Omar Abdel Aziz (2011) Development of wireless mechanism to reduce wiring complexities of robot manipulator. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Ali, A.M. and Ismail, M.Y. and Abdul Jamil, M.M. (2011) Development of artificial hand gripper for rehabilitation process. In: The 9th International Conference on Modelling in Medicine and Biology, 26 - 28 July 2011, Riga, Latvia.

Mohd Ali, A.M. and Wahi, A.J.M. and Abdul Jamil , Muhammad Mahadi Development of Artificial Hand Gripper by using Microcontroller. International Journal of Integrated Engineering . ISSN 2229-838X

N

Nordin, Normayati (2016) Performance investigation of turning diffusers at various geometrical and operating parameters. PhD thesis, Universiti Teknologi PETRONAS (UTP).

Nordin, Normayati and Abdul Karim, Zainal Ambri and Othman, Safiah and R.Raghavan, Vijay and Md Seri, Suzairin and Shaari, Muhammad Farid and adzila, sharifah Validation by PIV of the numerical study of flow in the two-dimensional turning diffuser. In: 5th International Conference on Production, Energy and Reliability , 15 - 17 August 2016, Kuala Lumpur.

Nordin, Normayati and Abdul Karim, Zainal Ambri and R. Raghavan, Vijay and Md Seri, Suzairin and Othman, Safiah (2016) Turning diffuser: development of performance correlations via asymptotic computational fluid dynamics technique. In: Research and Innovation Festival 2016, 14 November - 15 November 2016, Universiti Tun Hussein Onn Malaysia. (Submitted)

Nordin , Normayati and Abdul Karim, Zainal Ambri and Othman, Safiah and Raghavan, Vijay R. and Mohideen Batcha, Mohd Faizal and Hariri, Azian and Basharie, Siti Mariam (2016) Flow characteristics of 3-D turning diffuser using particle image velocimetry. In: 7th International Conference on Mechanical and Manufacturing Engineering, 1 - 3 August 2016, Jogjakarta, Indonesia.

Nordin , Normayati and Othman, Safiah and R.Raghavan, Vijay and Mohideen Batcha, Mohd Faizal and Idris, Siti Mariam (2011) Experimental investigation of pressure losses and flow characteristics in bend-diffusers by means of installing turning baffles. In: 2nd International Conference on Mechanical Engineering (ICME 2011) , 6-7 June 2011, Putrajaya.

Nordin , Normayati and Abdul Karim , Zainal Ambri and Othman, Safiah and R. Raghavan, Vijay (2013) Effect of varying inflow reynolds number on pressure recovery and flow uniformity of 3-D turning diffuser. In: 3rd International Conference and Exhibition on Sustainable Energy and Advanced Material (ICE-SEAM 2013) , 30-31 October 2013, MITC, Malacca.

O

Othman, Aida Syariza (2003) Penghasilan modul pembelajaran kendiri pengajian Kejuruteraan Mekanikal: mekanik bagi pelajar Kejuruteraan Mekanikal, Sekolah Menengah Teknik Dato' Lela Maharaja Rembau. Masters thesis, Kolej Universiti Teknologi Tun Hussien Onn.

R

Rahim, Mohammad Zulafif and Li, Guangxian and Ding, Songlin and Mo, John and Brandt, Milan (2015) Electrical discharge grinding versus abrasive grinding in polycrystalline diamond machining-tool quality and performance analysis. International Journal of Advanced Manufacturing Technology, 81 . pp. 1-4. ISSN 0268-3768

S

Saliza Azlina, Osman (2009) The effect of immersion silver thickness on intermetallics formed in sn-3.8ag-0.7cu leadfree solders. In: 2nd Annual International Conference on Green Technology and Engineering, 1 5 - 1 7 April 2009, Universitas Malahayati, Lampung, Indonesia.

Sherwani, F. and KSM Kader Ibrahim, Babul Salam and Huq, Mohammad Saiful and Ahmad, M.K.I. and Mohamed Nasir, Noorhamizah and Rahman, K.A.A. (2015) Rehabilitation system for paraplegic patients using mind-machine interface; a conceptual framework. In: International Conference on Electrical and Electronic Engineering 2015 (IC3E 2015), 10-11 August 2015, Melaka, Malaysia.

Sidek, Shahrul Naim and Shamsudin, Abu Ubaidah and Ismail, Elliana (2012) A hybrid controller with Chedoke-McMaster stroke assessment for Robot-Assisted rehabilitation. In: International Symposium on Robotics and Intelligent Sensors 2012 (IRIS 2012), 4-6 September 2012, Kuching, Sarawak.

Siswanto, Waluyo Adi and Chong, Szu Hua (2012) Strength analysis of human skull on high speed impact. International Review of Mechanical Engineering, 6 (7). pp. 1508-1514. ISSN 1970-8734

Siswanto, Waluyo Adi and Nagentrau, M. and Mohd Tobi, Abd Latif and Tamin, M. N. (2015) Contact pressure prediction comparison using implicit and explicit finite element methods and the validation with hertzian theory. International Journal of Mechanical & Mechatronics Engineering, 15 (6). pp. 1-8. ISSN 2227-2771

Siswanto, Waluyo Adi and Nagentrau, M. and Mohd Tobi, Abdul Latif and Tamin, M. N. (2016) Prediction of plastic deformation under contact condition by quasi-static and dynamic simulations using explicit finite element analysis. Journal of Mechanical Science and Technology, 30 (11). pp. 5093-5101. ISSN 1738-494X

Subhi , Zaid Ali (2012) The effects of vortex gate design on mechanical strength of thin section casting of LM 25 (Al—7Si-0.3mg) aluminum casting alloy. Masters thesis, Universiti Tun Hussein Onn Malaysia.

T

Talibin, Md Najip (2003) Kesediaan guru pelatih KUiTTHO memantau keselamatan pelajar dalam proses pengajaran di bengkel kejuruteraan pembuatan politeknik Malaysia. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Y

Yahaya , Mohd Yurzie Nazierul and Nordin , Normayati (2010) The development of thermal conductivity measurement apparatus. In: National Advanced Materials and Manufacturing Engineering Conference (NAMME), 25-26 May 2010, Batu Pahat, Johor.

Yeoh, Poh See (2015) An ansys cfx simulation on the study of 2 different automotive spraying techniques modeled with reference to 2 different spray angle. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Yudhistira, Prima Adhi (2011) Kinematical analysis and simulation of transformable wheelchair mechanism. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Yusof, Yusri Exploring the application of new data sstandard for CNC machining. Advances in Electrical and Electronics Engineering - IAENG Special Edition of the World Congress on Engineering and Computer Science 2008 .

Z

Zaman, Izzuddin and Abdurasad, Mohd Rajim and Manshoor, Bukhari and Khalid , Amir and Mohd Sani, Mohd Shahrir (2015) Study on dynamic behaviour of grass trimmer using finite element analysis. In: International Conference on Applications and Design in Mechanical Engineering 2015, 30-31 March 2015, Georgetown, Penang.

Zaman, Izzuddin and Manshoor, Bukhari and Khalid , Amir (2015) Study of vibration absorbers using epoxy reinforced natural fibers. In: International Conference on Applications and Design in Mechanical Engineering 2015, 30-31 March 2015, Georgetown, Penang.

Zulkifli, Shamsul Aizam and Kok , Boon Ching and Ahmad, Md Zarafi and Hamdan, Rohaiza and Ibrahim, Nur Aliaa (2008) Study of poles and zeros arrangement method for PID controller on TCSC. In: International Conference on Harmonics and Quality of Power (ICHQP 2008), 28 September - 1 October 2008, New South Wales , Australia.

This list was generated on Sun Oct 22 21:03:43 2017 MYT.