Items where Subject is "T Technology > TJ Mechanical engineering and machinery > TJ1040-1119 Machinery exclusive of prime movers"

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Creators | Item Type
Jump to: A | D | I | K | M | O | S | T | Y
Number of items at this level: 24.

A

Abd Rahim, Erween and H. Dorairaju, Dhemarani and Asmuin, Norzelawati and Asril Rajo Mantari, Muhammad Hanafi (2014) Determination of mist flow characteristic for MQL technique using particle image velocimetry (PIV) and computer fluid dynamics (CFD). In: International Integrated Engineering Summit (IIES 2014), 1-4 December 2014, Universiti Tun Hussein Onn Malaysia, Johor.

Abd Rahim, Erween and Sasahara, Hiroyuki (2011) Investigation of tool wear and surface integrity on MQL machining of Ti-GAL-4V using biodegradable oil. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 225 (9). pp. 1505-1511. ISSN 0954-4054

Abd Rahim, Erween and Warap, Norazlan and Mohid, Zazuli (2015) Thermal-assisted machining of nickel-based alloy. In: Superalloys. Intech Open Access Journal. ISBN 978-953-51-2212-8

Abd Rahman, Norashidah (2012) Fatigue behaviour and reliability of extended hollobolt to concrete filled hollow section. PhD thesis, University of Nottingham.

Abd. Rahim , Erween and Samsudin, Z.H. and Abdul Rahim, Muhammad Arif and Mohid, Zazuli (2014) Performance investigation of modified turning tool holder for MQL application. Applied Mechanics and Materials , 465 . pp. 1114-1118. ISSN 1660-7482

Ali, M. H. and Azmir, Nor Azali and Ghazali, Mohd Imran and Yahya, Musli Nizam (2015) Predicting hand grip strength of hand held grass cutter workers : neural network vs regression. In: 2nd International Materials, Industrial & Manufacturing Engineering Conference (MIMEC 2015), 4-6 February 2015, Bali Nusa Dua Convention Center, Bali, Indonesia.

Awad, Mohammed and Tee , Kian Sek and Dehghani, Abbas (2011) Design of an efficient back-drivable semi-active above knee prosthesis. In: 14th International Conference on Climbing and Walking Robots and the Support Technologies for Mobile Machines, 6-8 September 2011, Paris, France.

D

Dorairaju, Hemarani (2015) Investigation of cutting temperature and cutting force from mist flow pattern in MQL technique. Masters thesis, Universiti Tun Hussein Onn Malaysia.

I

Ibrahim, Asriana and Ali, Ashikin (2013) A study of vegetable oils as a helical gear lubricant. In: Prosiding Seminar Kebangsaan Aplikasi Sains dan Matematik 2013 (SKASM 2013) , 29-30 Oktober 2013, Batu Pahat, Johor . (Unpublished)

Ibrahim, Mohd Halim Irwan and Mustafa, N. and Mohd Amin, Azriszul and Asmawi, Rosli (2015) Processability study of natural hydroxyapatite and SS316L via metal injection molding. In: 2015 International Symposium on Technology Management and Emerging Technologies (ISTMET), 25-27 August 2015, Langkawi, Kedah, Malaysia.

Isa, Khalid and Arshad, Mohd Rizal (2015) Development of a hybrid-driven autonomous underwater glider with a biologically inspired motion control system. In: 10th Asian Control Conference (ASCC 2015), 31 May - 3 June 2015, Sutera Harbour Resort, Kota Kinabalu, Sabah.

K

KSM Kader Ibrahim, Babul Salam and Tokhi, M. O. and Huq, M. S. and Gharooni, S. C. (2011) Fuzzy logic based cycle-to-cycle control of FES induced swinging motion. In: International Conference on Electrical, Control and Computer Engineering, 21-22 June 2011, Pahang, Malaysia.

KSM Kader Ibrahim, Babul Salam and Tokhi, M.O. and Huq, M.S. and Gharooni, S.C. (2011) Natural trajectory based FES-induced swinging motion control. In: 4th International Conference on Mechatronics (ICOM 2011), 17-19 May 2011, Kuala Lumpur, Malaysia.

M

Mahamad, Abd Kadir and Hiyama, Takashi (2010) Development of ANN for diagnosing induction motor bearing failure. IEEJ Transactions on Industry Applications, 130 .

Mahamad, Abd Kadir and Hiyama, Takashi and Ghazali, Mohd Imran Diagnosis and prognosis of bearing failure in rotating machinery using acoustic emission and artificial neural network. IEEJ Transactions on Industry Applications, 130 . pp. 443-449.

Mohamad Tahir, Abdul Fattah (2015) Experimental evaluation of Co2 laser cutting quality of ultra high strength steel (UHSS) using nitrogen as an assisted gas. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Amin, Azriszul and Mohd. Seri, Suzairin and Vijay, R. Raghavan (2007) Study of the temperature distribution in disc brakes by the method of order-of-magnitude analysis. In: Regional Conference on Engineering Mathematics, Mechanics, Manufacturing & Architecture (EM3arc) 2007, 2007.

Mohd Rasidi, Ibrahim and Abd Rahim, Erween and Ibrahim, A. and Maskam, N. A. and Ghani, S. C. (2014) The effect on the application of coolant and ultrasonic vibration assisted micro milling on machining performance. Applied Mechanics and Materials, 660 . pp. 65-69. ISSN 1662-7482

O

Othman, Razimah (2003) Penghasilan modul amalan keselamatan bagi meningkatkan tahap kesedaran pelajar di dalam makmal teknologi pembinaan (kerja kayu & perabot) di KUiTTHO). Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

S

Sadun, Amirul Syafiq and Jalani, Jamaludin and Abd Sukor, Jumadi (2015) Adaptive friction compensation for hand grasping and compliant control. In: IEEE International Conference on Advanced Intelligent Mechatronics (AIM) 2015 , 7-11 July 2015, Busan, Korea.

Sapian, Nik Fazli (2012) Design of pulse jet coolant delivery system for minimal quantity lubricant (IP MQL) operation. Masters thesis, Universiti Tun Hussein Onn Malaysia.

T

Talib, Norfazillah and Abd Rahim, Erween (2014) The performance of modified jatropha-oil based trimethylolpropane(TMP) ester on tribology characteristic for sustainable metalworking fluids (MWFs). Applied Mechanics and Materials, 660 . pp. 357-361. ISSN 1662-7482

Tee , Kian Sek and Dehgani-Sanij, A. A. and Moser, D. and Zahedi, M. S. (2009) An insole shear force monitoring system for optimum alignment in lower limb amputees. In: 12th International Conference on Climbing and Walking Robots and the Support Technologies for Mobile Machines, 9-11 September 2009, Istanbul, Turkey.

Y

Yusof, Yusri and Kassim, Noor Diana and Zamri Tan, Nurul Zakiah (2010) The development of a new STEP-NC code generator (GEN-MILL). International Journal of Computer Integrated Manufacturing, 24 (2). pp. 1-9. ISSN 0951-192X

This list was generated on Sat Sep 23 13:54:22 2017 MYT.