Items where Subject is "T Technology > TJ Mechanical engineering and machinery > TJ1125-1345 Machine shops and machine shop practice"

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Creators | Item Type
Jump to: A | C | D | H | I | J | K | L | M | O | R | S | T | W | Y
Number of items at this level: 63.

A

Abbas, Abbas Allawi (2014) Optimization of parameters of laser non-linear inclined cutting on stainless steel metal. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abd Rahim, Erween and Warap, N. M. and Mohid, Zazuli and Ibrahim, R. (2014) Investigation on laser assisted micro ball milling of Inconel 718. Applied Mechanics and Materials, 660 . pp. 79-83. ISSN 1662-7482

Abd Rahim, Erween and Warap, N. M. and Mohid, Zazuli and Ibrahim, R. and Ismail, M. I. S. (2014) Numerical analysis of laser preheating for laser assisted micro milling of inconel 718. In: International Integrated Engineering Summit (IIES 2014), 1-4 December 2014, Universiti Tun Hussein Onn Malaysia, Johor.

Abdul Hamid, Faizul Ezmat and Wan Yusoff, Wan Zahari (2013) Investigation on different composition of powder metallurgy electrode (Cu-W) in high performance EDM (HPEDM) on AISI D2 hardened steel. Other thesis, Universiti Tun Hussein Onn Malaysia.

Abdul Rahim, Erween and Ibrahim, Rosziati and Mohid, Zazuli and Ahmad, M.F. and Shahrudin, M. (2014) Study on temperature, force and specific energy of AlSl 1020 under MQL grinding process. Applied Mechanics and Materials , 465 . pp. 1119-1123. ISSN 1660-7482

Ahmad, Said and Lajis, Mohd Amri (2013) Effect of higher peak current and pulse duration on EWR of copper electrode when electrical discharge machining (EDM) of inconel 718. Advanced Materials Research, 845 . pp. 945-949. ISSN 1662-8985

Ahmad, Said and Lajis, Mohd Amri (2013) Electrical discharge machining (EDM) of Inconel 718 by using copper electrode at higher peak current and pulse duration. IOP Conference Series: Materials Science and Engineering, 50 (1). ISSN 1757-899X

Ahmad Nurdin, N. and Harun, Dalila and Mohd Tobi, Abd Latif (2014) Characterization of Ti-6Al-4V reciprocating sliding wear test behaviour. In: International Integrated Engineering Summit (IIES 2014), 1-4 December 2014, Universiti Tun Hussein Onn Malaysia, Johor.

Ali, Ahmad Hadi and Bidin, Noriah (2007) Nd pulsed laser machining on photographic paper. In: 3rd Asian Symposium on Intense Laser Science (ASILS 2007), 1-6 Jun 2007, Cameron Highland.

Anggono, Agus Dwi and Siswanto, Waluyo Adi and Omar, Badrul (2012) Algorithm development and dpplication of spring back compensation for sheet metal forming. Research Journal of Applied Sciences, Engineering and Technology, 4 (14). pp. 2036-2045. ISSN 2040-7467

C

Che Juhan Negara, Roslena (2012) Tahap kesediaan pelajar kejuruteraan Politeknik terhadap keselamatan di dalam bengkel. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Chew , Yueh Seng (2014) Machining of Inconel 718 (difficult to cut materials) using cryogenic and non-cryogenic cutting tools. Masters thesis, Universiti Tun Hussein Onn Malaysia.

D

Daud, Mohd Elias (2014) Step-NC controller for 3-axis CNC milling machine. PhD thesis, Universiti Tun Hussein Onn Malaysia.

H

Hassan, Suhaimi and Hehsan, Haffidzudin and K., Khairu and Esa, Mohd Faizal and Sardan, Ain Syuhada and Abd. Salim, Nuraisyah and Kasmin, Ashari (2015) Development of automated control system for kuih penderam stamping machine. Applied Mechanics and Materials , 2015 . pp. 773-774. ISSN 1660-9336

Hosni, Nor Ain Jamil (2013) Wear behaviour of advanced multilayer coating pvd-tiaIn in dry machining of AISI D2 hardened steel. Masters thesis, Universiti Tun Hussein Onn Malaysia.

I

Ibrahim, Mohd Halim Irwan and Mohd Amin, Azriszul and Wahab, Md Saidin and Asmawi, Rosli and Mustafa, N. (2015) Solvent debinding variables on leaching fat, oil and grease (FOG) derivatives of green part stainless steel SS316L metal injection moulding. In: 2015 International Symposium on Technology Management and Emerging Technologies (ISTMET), 25-27 August 2015, Langkawi, Kedah, Malaysia.

Ibrahim, Mohd Rasidi (2010) Vibration assisted machining: modelling, simulation, optimization, control and applications. PhD thesis, Brunel University.

Ibrahim, Mohd Rasidi and Rafai, Noor Hakim and Kamaruddin, S.A. and Ding, H. and Cheng, K. (2015) An investigation of cutting mechanics in 2 dimensional ultrasonic vibration assisted milling toward chip thickness and chip formation. In: International Conference on Mechanical Engineering Research (ICMER), 18-19 August 2015, Kuantan, Pahang.

Ibrahim, Rasidi and Rafai, Noor Hakim and Abd Rahim, Erween and Kai, Cheng and Hui, Ding (2015) A performance of 2 dimensional ultrasonic vibration assisted milling in cutting force reduction, on aluminium AL6061. In: International Engineering Research and Innovation Symposium 2015 (IRIS), 12–13 September 2015, Putrajaya, Malaysia.

Idris, Muhammad Ridzuan (2015) Effects of chromium powder mixed in electrical discharge machining of AISI D2 hardened steels. Masters thesis, Universiti Tun Hussein Onn Malaysia.

J

Jasni, Nur Akmal Hakim (2013) Cutting performance of advanced multilayer coated (TiAlN/ AlCrN) in machining of AISI D2 hardened steel. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Jasni, Nur Akmal Hakim and Lajis, Mohd Amri (2013) Cutting performance of advanced multilayer coated (TiAlN/ AlCrN) in machining of AISI D2 hardened steel. Other thesis, Universiti Tun Hussein Onn Malaysia.

K

Kamdi, Zakiah and Shipway, P.H. and Voisey, K.T. (2013) A modified micro-scale abrasion for large hard phase cermet. Applied Mechanics and Materials, 393 . pp. 888-892. ISSN 978-3-03785-823-3 (ISBN)

Kasim@Kassim, Noordiana and Yusof, Yusri and Bahrudin, Ida Aryanie and Mohd Hanifa, Rafizah and Mohamed Nor, Mohd Hadri and Abd Aziz, Azizul Rahman and Othman, Zahrul Hisham (2014) Information structure of STEP convertor of STEP-CNC mapping system. In: International Integrated Engineering Summit (IIES 2014), 1-4 December 2014, Universiti Tun Hussein Onn Malaysia, Johor.

Kassim@Kasim, Noordiana (2015) The development of new step-NC mapping system for step-NC integration. PhD thesis, Universiti Tun Hussein Onn Malaysia.

L

Laily, Suraya (2016) Performance evaluation of copper and graphite electrode in electrical discharge machine (EDM) of aluminium alloy LM6. Masters thesis, Universiti Tun Hussein Onn Malaysia.

M

M., Hafiz Helmi and M., Azuddin and Wagiman , Abdullah (2009) Investigation of surface roughness and material removal rate (MRR) on tool steel using brass and copper electrode for electrical discharge grinding (EDG) process. International Journal of Integrated Engineering, 1 (1). pp. 31-39. ISSN 1985-854X

M.Elkamel, Hasan Taher and Basuno, Bambang and Asmuin, Norzelawati (2013) Investigation the behaviour of cell centered finite volume scheme to the convergent divergent nozzle flow problems. In: Prosiding Seminar Kebangsaan Aplikasi Sains dan Matematik 2013 (SKASM 2013) , 29-30 Oktober 2013, Batu Pahat, Johor .

M.Nor, Fethma and Lee , Yee Loon and Lim, Joong Yeon and Tamin , M.N. and Idris, M.H. (2013) Effect of starter defect to GIIC of unidirectional CFRP composite. In: 1st International Conference on Mechanical Engineering (iCOME 2013), 12-14 September 2013, Lombok, Indonesia.

Md Salleh, Salihatun and Abd. Rahim , Erween and Roslan, M. N. and Ismoen, Muhaimin and Madlan, M. A. and Masrol, Shaiful Rizal and Jelani, A. R. and Ahmad, M. R. (2013) Hand-arm vibration of unskilled oil palm motorised cutter operator. Applied Mechanics and Materials, 315 (2013). pp. 695-699. ISSN 1662-7482

Mohammed Saif, Yazid Abdulsameea (2014) Modelling and simulation of surface roughness obtain from micro milling by using artificial neural network. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Zukeri , Mohd Zaim (2010) Study on cutting operation in turning process by 3d simulation using deform 3D. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohid, Zazuli and Warap, N. M. and Abd Rahim, Erween (2015) Machining performance of laser assisted micro milling (LAuM) on Ti6A14V. In: 4th International Conference on Advanced Manufacturing Technology (ICAMT 2015), 20-22 September 2015, Johor Bahru, Malaysia.

Mohid, Zazuli and Warap, N. M. and Ibrahim, R. and Abd Rahim, Erween (2014) Laser assisted micro-groove ball milling of Ti6Al4V. Applied Mechanics and Materials, 660 . pp. 55-59. ISSN 1662-7482

Mohmd Arifin, Nabila Afif (2012) Finite element simulation of machining aisi 1045 steel using uncoated carbide tool. Masters thesis, Universiti Tun Hussein Onn Malaysia.

O

Osman, Saliza Azlina and Kamarul Ariffin, C.M. and Kurniawan, Denni and Ibrahim , Mohd Halim Irwan (2015) Effect of cutting speed on bio-corrosion of AISI 316L stainless steel. ARPN Journal of Engineering and Applied Sciences, 11 (4). pp. 2496-2500. ISSN 18196608

R

Rafai, Noor Hakim and Lajis, Mohd Amri and Hosni, Nor Ain Jamil (2014) The effect of machining parameters on surface integrity when milling hardened steel. Applied Mechanics and Materials, 660 . pp. 70-73. ISSN 1662-7482

Rafai, Noor Hakim and Lajis, Mohd Amri and Hosni, N. A. J. (2013) Performance of TiAlN-PVD coated carbide tools in milling AISI D2 hardened steels. In: International Conference on Production Engineering (ICPE2013), 30-31 May 2013, Tokyo, Japan.

Rahim, Mohammad Zulafif (2015) Research on electrical discharge machining of polycrystalline diamond. PhD thesis, RMIT University.

S

Sabudin , Sulastri and Iu, Ching Lie and Mohamad, Eddy Ezwan (2012) Multi-cutting passes for a fine-cut wire electro discharge machining of stainless steel. Advanced Materials Research, 418 . pp. 1288-1293. ISSN 1022-6680

Saher, Mohd Najib (2015) Amalan pengurusan keselamatan Bengkel Kemahiran Hidup (KHB) sekolah menengah harian Daerah Batu Pahat. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Sallehuddin, Nur Fazreen (2013) Kesedaran terhadap amalan keselamatan dalam kalangan pelajar di Makmal Kejuruteraan UTHM. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Sapian, Nik Fazli and Omar, Badrul and Abd Shukor, Mohd Hamdi (2010) Integrated mechanical pulse jet coolant delivery system performance for minimal quantity lubrication. International Journal of Integrated Engineering, 2 (1). pp. 1-16. ISSN 1985-854X

T

Tahir, A.F.M. and Abd Rahim, Erween (2015) Study on the laser cutting quality of ultra high strength steel. In: International Conference on Mechanical Engineering Research (ICMER), 18-19 August 2015, Kuantan, Pahang.

Talib, Mohd Fairuz (2014) Keprihatinan pensyarah terhadap amalan keselamatan bengkel di ADTEC Batu Pahat. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Tan, W.C. and Jamian, Saifulnizan and Ghazali, Mohd Imran and Mohamed, N.A.N. (2007) Fundamental frequency of hybrid composite plate embedded with shape memory alloy wire. In: Proceeding of Computational and Experimental Mechanics (CEM 2007), 27-28 November 2007, Putrajaya, Malaysia.

Thamizhmanii, Sivaprakasam and Hasan, Sulaiman (2011) Performance of CBN and PCBN tools on the machining of hard ALSl 440C marpensitic stainless steel. Advanced Materials Research, 264 . pp. 1137-1147. ISSN 1022-6680

Thamizhmanii, Sivaprakasam and Hasan, Sulaiman (2010) Relationship between flank wear and cutting force on the machining of hard martensitis stainless steel by super hard tools. Proceedings of the World Congress on Engineering, 3 . pp. 2185-2190. ISSN 2078-0958

Thamizhmanii, Sivaprakasam and Kamarudin, K. and Rahim, E. A. and Omar, Badrul and Hasan, Sulaiman (2007) An investigation of multi-roller burnishing process on mild steel and copper metal. In: World Engineering Congress 2007, 5-9 August 2007, Penang, Malaysia.

Thamizhmanii, Sivaprakasam and Mohideen, Rasool and Zaidi, A.M.A. and Hasan, Sulaiman (2015) Surface roughness and tool wear on cryogenic treated CBN insert on titanium and inconel 718 alloy steel. In: International Conference on Mechanical Engineering Research (ICMER), 18-19 August 2015, Kuantan, Pahang.

Thamizhmanii, Sivaprakasam and Sulaiman, Hasan (2012) Machinability study using chip thickness ratio on difficult to cut metals by CBN cutting tool. Key Engineering Materials, 504 . pp. 1317-1322. ISSN 1662-9795

W

Wan Ismail , Wan Sabri (2012) Kesedaran keselamatan dalam kalangan pelajar Kolej Kemahiran Tinggi MARA di Lembah Kelang. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Wong, F.R. and Sharif, S. and Kamdani, Kamaruddin and Abd. Rahim , Erween (2008) The effect of drill point geometry and drilling technique on tool life when drilling titanium alloy, Ti-6Al-4V. In: International Conference on Mechanical and Manufacturing Engineering 2008 (ICME 2008), 21-23 May 2008, Puteri Pacific Johor Bahru, Johor, Malaysia.

Y

Yahya, Musli Nizam and Azmir, Nor Azali and Razlan, Mohd Rafi' (2014) Whole body vibration risk among grass cutter operator: a preliminary study. In: 2nd World Conference on Islamic and Civilization 2014 (WCIT 2014), 18-19 August 2014, Ipoh, Perak.

Yusof, Mohd Khairul Azhar (2014) Amalan keselamatan bengkel dalam kalangan pelajar Kolej Vokasional Temerloh. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Yusof, Yusri (2013) Pengenalan kepada STEP-NC. Penerbit UTHM. ISBN 978-967-0468-11-2

Yusof, Yusri and Latif, Kamran (2014) A new ISO 14649 translation module for open architecture CNC systems. Applied Mechanics and Materials, 660 . pp. 878-882. ISSN 1662-7482

Yusof, Yusri and Latif, Kamran (2015) A novel ISO 6983 interpreter for open architecture CNC systems. International Journal of Advance Manufacturing Technology . ISSN 0268-3768

Yusof, Yusri and Latiff, Kamran (2015) New technique for the interpretation of ISO 14649 and 6983 based on open CNC technology. International Journal of Computer Integrated Manufacturing . ISSN 0951-192X

Yusof, Yusri (2010) ISO 14649 (STEP-NC): new standards for CNC machining. International Journal of Integrated Engineering, 2 (1). pp. 1-8. ISSN 1985-854X

Yusof, Yusri and Elias, D. M. (2013) CNC machine controller using STEP-NC data model for milling operation. In: Proceedings of the 2nd International Conference on Advanced Manufacturing (ICAM 2013) , 12-13 December 2013, Ayodya Resort Bali, Indonesia .

Yusof, Yusri and Latif, Kamran (2013) Frame work of LV-UTHM: AN IS0 14649 based open control system for CNC milling machine. Applied Mechanics and Materials , 330 . pp. 619-623. ISSN 1662-7482

Yusof, Yusri and Mohd Nor, Mohd Fahrurazi (2011) Review of STEP-NC compliant system for turn-mill operations. Advanced Materials Research, 383 . pp. 2827-2831. ISSN 1022-6680

This list was generated on Mon Apr 24 16:18:54 2017 MYT.