Items where Subject is "T Technology > TJ Mechanical engineering and machinery > TJ212-225 Control engineering systems. Automatic machinery (General)"

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Creators | Item Type
Jump to: A | B | C | G | H | I | J | K | L | M | N | O | P | R | S | T | W | Y | Z
Number of items at this level: 72.

A

Abd Aziz, Aizat (2013) PV boost converter conditioning using neural network. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abd Karim, Nurliana (2014) Simulation of speed control brushless dc motor using gaussian fuzzy logic controller. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abd Majid, Nor Ayuni (2014) Autonomous fire protection robot with notification. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abd Rahman, Ramhuzaini (2016) Dynamical adaptive backstepping-sliding mode control for servo-pneumatic positioning applications: controller design and experimental evaluation. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Abdul Kadir, Herdawatie (2005) Modelling and control of a balancing robot using digital state space approach. Masters thesis, Universiti Teknologi Malaysia.

Abdul Latif, Noradila and Ramli, Rizauddin (2010) Pembangunan modul pembelajaran bagi sistem kawalan automasi PLC. In: Persidangan Kebangsaan Pendidikan Kejuruteraan dan Keusahawanan 2010, 25-26 September 2010, Kota Bahru, Kelantan.

Abdul Shaib, Mohd Fadzli and Abdul Rahim, Ruzairi and Mohd. Muji, Siti Zarina and Mohd Fadzil, Naizatul Shima and Zawahir, Mohd Zikrillah (2013) Comparison between two different types of microcontroller in developing optical tomography controller unit. Jurnal Teknologi, 64 (5). pp. 13-17. ISSN 0127-9696

Abdullah, Mohamad Syah Rizal (2013) Neural network controller design for position control system improvement. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ahmad, Norhidayah (2013) Linear Quadratic Gaussian (LQG) controller for inverted pendulum. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ahmad , Afandi and Loo, K. K. and Cosmas, J. (2008) A survey of programmable and dedicated approaches in VLSI architecture design for real-time video processing. In: ICC'08: Proceedings of the 12th WSEAS International Conference on Circuits, 19-23 May 2008, Beijing, China. (Unpublished)

Ahmed Elshayeb , Said Abdo (2010) Multi-sensor fusion for automated guided vehicle positioning. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ali, Ashikin (2014) An improved multilayer perceptron based on wavelet approach for physical time series prediction. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ali, Nur Illyana (2013) Simulation for position control of DC motor using fuzzy logic controller. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Alias, Nor Akmal (2013) Linear quadratic regulator (LQR) controller design for inverted pendulum. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Azmi, Anita and Abdul Samad, Abdul Aziz (2011) Process description for PLC program design. International Journal of Integrated Engineering, 1 (3). pp. 15-08. ISSN 1985-854X

B

Bhagwan Das, Bhagwan Das and Abdullah, Mohammad Faiz Liew and Mohd Shah, Nor Shahida and M. Y. Siti Nurul Sharina, M. Y. Siti Nurul Sharina and Bakhsh, Qadir and Bishwajeet Pandey, Bishwajeet Pandey (2015) Temperature regulations of pseudo noise generator based optical transmitter using airflow and heat sink profile. In: 6th International Conference on Mechanical, Industrial, and Manufacturing Technologies (MIMT 2015), 6-7 March 2015, Melaka, Malaysia.

Bin Ambar, Radzi and Sagara, Shinichi and Yamaguchi, Takuya (2013) Development of a dual-shaft propeller thruster equipped with rotational speed sensor for UVMS control. In: The Eighteenth International Symposium on Artificial Life and Robotics 2013 (AROB 18th '13), 30 Jan - 01 Feb 2013, Daejeon Convention Center, Daejeon, Korea.

Bong , Siaw Wee and Abdullah, M.F.L. (2012) Fuzzy inference system based adaptive modulation scheme for optical wireless communication. In: Persidangan Kebangsaan Penyelidikan dan Inovasi Dalam Pendidikan dan Latihan Teknikal dan Vokasional CiE-TVET 2012, 25-26 September 2012, Politeknik Nilai, Negeri Sembilan.

Bong , Siaw Wee and Abdullah, Mohammad Faiz Liew (2012) Fuzzy inference system based adaptive modulation scheme for optical wireless communication. In: Persidangan Kebangsaan Penyelidikan dan Inovasi Dalam Sistem Pendidikan dan Latihan Teknikal dan Vokasional CiETVET 2012, 25-26 September 2012, Politeknik Nilai, Negeri Sembilan.

C

Chia Woon, Liew (2014) Obstacle avoidance robot applying fuzzy control system. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Chin, Ken Leong (2013) Programmable logic controller based variable speed drives for educational trainer. Masters thesis, Universiti Tun Hussein Onn Malaysia.

G

Ghazali, Rozaimi and Sam, Y. M. and Hanafi, Dirman and Ngadengon@Ngadungon , Rafidah and Zulfatman, (2011) Point-to-Point trajectory tracking with discrete sliding mode control of an electro-hydraulic actuator system. In: Student Conference on Research and Development (SCOReD 2011), 19th-20th Disember 2011, Cyberjaya.

H

Hamid, Nor Baizura and Sanik, Mohd Erwan and Kaamin, Masiri and Amir Khan, Suwandi and Mokhtar, Mardiha (2013) Sistem penggera keselamatan banjir domestik (D 'FESAS). In: Prosiding Seminar Kebangsaan Aplikasi Sains dan Matematik 2013 (SKASM 2013) , 29-30 Oktober 2013, Batu Pahat, Johor .

Hamzah, Norhazimi and Aripin, M Khairi and Md Sam, Yahaya and Selamat, Hazlina and Ghazali, Rozaimi (2012) Second order sliding mode controller for longitudinal wheel slip control. In: IEEE 8th International Colloquium on Signal Processing and its Applications (CSPA), 23-25 March 2012, Melaka, Malaysia.

Hanafi, Dirman and Sidik, Mohd Azkar and Zoni, Mirza and Hidayat, Hidayat (2015) Time base firing pulse delay control for improving single phase induction motor speed performance using fuzzy logic control. In: International Engineering Research and Innovation Symposium 2015 (IRIS), 12–13 September 2015, Putrajaya, Malaysia.

Hanafi, Dirman (2010) PID controller design for semi-active car suspension based on model from intelligent system identification. In: 2nd International Conference on Computer Engineering and Applications (ICCEA2010), 19-21 March 2010, Bali Island.

Hanafi, Dirman and Mohd Zaid, Amran and Johari, Ayob and Shahbudin, Izaidah (2010) Development of dryer system for laundry business. In: Persidangan Kebangsaan Pendidikan Kejuruteraan dan Keusahawanan , 25-26 September 2010, Kelantan, Malaysia.

Hanafi, Dirman and Sidik, Mohd Azkar and Zoni, Mirza and Hidayat, Hidayat (2016) Time base firing pulse delay control for improving single phase induction motor speed performance using fuzzy logic control. ARPN Journal of Engineering and Applied Sciences, 11 (12). ISSN 18196608

Hashim, Hairulazwan and Abdullah, Jiwa and Lee, Boon Yong (2011) Campus traffic light control system using PIC 18F4550 microcontroller. In: Malaysian Technical Universities International Conference on Engineering and Technology (MUiCET'11), 13-15 November 2011, Batu Pahat, Malaysia.

Hashim, Mohd Nasri (2013) Induction motor modelling using fuzzy logic. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Hasnan, Khalid and Saesar, Luhur Budi and Yudhistira, Prima Adhi (2012) Extend the utilization of joystick for visualization, telemetry and control on unmanned vehicle development. Applied Mechanics and Materials , 148 . pp. 442-445. ISSN 1660-9336

Husaini , Noor Aida and Ghazali, Rozaida and Ismail, Lokman Hakim and Abdul Hamid , Norhamreeza and Mat Deris, Mustafa and Mohd Nawi, Nazri (2011) Temperature forecasting with a dynamic higher-order neural network model. In: iiWAS '11: Proceedings of the 13th International Conference on Information Integration and Web-based Applications and Services, 5–7 December 2011, Ho Chi Minh City, Vietnam.

Hussain, Khashif and Mohd Salleh, Mohd Najib (2015) Analysis of techniques for anfis rule-base minimization and accuracy maximization. In: International Conference on Electrical and Electronic Engineering 2015 (IC3E 2015), 10-11 August 2015 , Melaka, Malaysia.

I

Isa, Khalid and Arshad, Mohd Rizal (2013) An analysis of homeostatic motion control system for a hybrid-driven underwater glider. In: 2013 IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM 2013), 9-12 July 2013, Wollongong, Australia.

Ismail, Nurfakhirah (2013) Fuzzy logic controller design for inverted pendulum system. Masters thesis, Universiti Tun Hussein Onn Malaysia.

J

Jalani, Noor Hisham (2008) Position control for linear motion servo system via nominal characteristic trajectory following controller. Masters thesis, Universiti Teknologi Tun Hussein Onn Malaysia.

Jalani , Jamaludin and Mahyuddin, Nasiruddin and Herrmann, Guido and Chris, Melhuish (2013) Active robot hand compliance using operational space and integral sliding mode control. In: 2013 IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM 2013), 9-12 July 2013, Wollongong, Australia.

Jumaat, Siti Amely and Musirin, Ismail and Othman, M. M. and Mokhlis, Hazlie (2013) Cluster identification for optimal placement of static var compensator. In: 2013 IEEE 7th International Power Engineering and Optimization Conference (PEOCO2013), 3-4 June 2013, Langkawi, Malaysia.

Jumaat, Siti Amely and Musirin, Ismail and Othman, Muhammad Murtadha and Mokhlis, Hazlie (2011) Transmission loss minimization using SVC based on particle swarm optimization. In: 2011 IEEE Symposium on Industrial Electronics and Applications (ISIEA2011), 25 - 28 September 2011, Bayview Hotel Langkawi Malaysia.

K

Kok , Mun Ng and Haron, Zainal Alam (2010) Visual microcontroller programming using extended S-system Petri nets. WSEAS Transactions on Computers, 9 (6). pp. 573-582. ISSN 1109-2750

L

Lorothy Morrison Buah, Lorothy Morrison Buah (2012) Supervisory control for conventional unitary air conditioning system. Masters thesis, Universiti Tun Hussein Onn Malaysia.

M

M. Alsharif, Ali Omar (2014) Neutral point inverter controller using h infinity techniques. Masters thesis, Universiti Tun Hussein Onn Malaysia.

M. J, Mohd Fairuz and Ma'radzi, Ahmad Alabqari and Ahmad, Muhammad Shukri (2009) Development of interfacing system for PIC based datalogger. In: Proceedings of MUCEET 2009 Malaysian Technical Universities Conference on Engineering and Technology , 20 - 22 June 2009, MS Garden,Kuantan, Pahang, Malaysia.

Masdar, Aizan (2016) Development of a wireless current controlled stimulator for individuals with spinal cord injury. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mat Ali, Mazita (2013) Development of self balancing platform on mobile robot using PID controller. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Md Jamal, Muhammad Hazwan (2013) Modeling and control of the fish feeder system. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Md Salleh, Salihatun and Md Zain, Badrul Aisham and Yahya, Mohd Shahir and Wahab, Md Saidin and Che Ghazali, C. H. I. and Yusof, M. S. (2014) Implementation of PLC system in fish feeding rate determination. Applied Mechanics and Materials, 660 . pp. 841-845. ISSN 1662-7482

Md Salleh, Salihatun and Jafferi, Noormaziah and Md Zain, Badrul Aisham and lbrahim, Mohd Halim Irwan and Abd. Rahim , Erween and Wahab, Md Saidin and Mazlan, M. S. and Yong, M. H. and Samat, S. N. A. and Yusoff, M. F. M. (2013) Cabaran pembangunan sistem pemberi makanan ikan. In: Persidangan Kebangsaan Pertama Program Pemindahan Ilmu (KTP01), 21-23 Ogos 2013, Bangi. (Unpublished)

Md Zain, Badrul Aisham and Khasim, Muhammad Farhan and Md Salleh, Salihatun and Wahab, Md Saidin (2014) Design concept of two tank reservoirs to maintain pH value for tiger prawn. Applied Mechanics and Materials, 660 . pp. 851-856. ISSN 1662-7482

Mohamed Nasir, Noorhamizah (2011) Real time implementation of PID and fuzzy logic controller for single tank system using LABVIEW. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Fairuz , M. J. and Ahmad Alabqari , Ma'radzi and Muhammad Shukri , Ahmad Development of interfacing system for PIC based datalogger. In: Malaysian Technical Universities Conference on Engineering and Technology (MUCEET2009), 20-22 June 2009, Kuantan, Pahang.

Mohd Muji, Siti Zarina and Che Mohd. Salleh, Wan Ahmad Shukry (2007) Panduan asas mikropengawal PIC 16F84. Penerbit UTHM. ISBN 978-983-2963-48-6

Mohd Yusoff, Suhairiyanti (2013) PID current control technique for three phase induction motor using Matlab Simulink and Arduino. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Muhaiyiddin, Faisal and Sanudin, Rahmat and Abd Wahab, Mohd Helmy and Johari, Ayob Development of digital vehicle distance monitoring system. Compilation of Papers - VOLUME 1 .

Mulyana, Tatang and Mohd Than, Mohd Nor and Hanafi, Dirman (2010) A discrete time model of four heat exchanger types HE 158c. In: 7th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics HEFAT2010, 19-21 July 2010, Antalya, Turkey.

N

Ngadengon@Ngadungon , Rafidah and Md Sam, Yahaya (2010) Discrete time sliding mode control using multirate output feedback to reduce chattering. In: Student Conference on Research and Development (SCOReD 2010), 13-14 December 2010, Putrajaya, Malaysia.

Noh, Muhamed Fauzie (2014) Design of fuzzy controller of induction motor for electric vehicle application. Masters thesis, Universiti Tun Hussein Onn Malaysia.

O

Omar, Zamri (2015) Control system engineering: Principles and Design. Penerbit UTHM. ISBN 978-967-0468-96-9

Ong , Joo Hun (2008) Development of a genetic algorithm controller for cartesian robot. Masters thesis, Universiti Tun Hussein Onn Malaysia.

P

P. Saminathan, Kantan (2008) Computational intelligence method for optimal rotary design system. Masters thesis, Universiti Tun HUssein Onn Malaysia.

R

Ramli, Nur Mardiana (2015) Improvement of power factor in renewable energy system. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Rosly, Muhammad Aliff and Samad, Zahurin and Shaari, Muhammad Farid (2014) Feasibility studies of arduino microcontroller usage for IPMC Actuator Control. In: 4th IEEE International Conference on Control System, Computing and Engineering (ICCSCE 2014), 28-30 November 2014, Penang, Malaysia.

Ruslee, Ruslinda (2008) Anti - swing control strategy for automatic 3 DOR crane system using FLC. Masters thesis, Universiti Tun Hussein Onn Malaysia.

S

Sabudin, Elia Nadira (2012) Development of position tracking of BLDC motor using adaptive fuzzy logic controller. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Sadun, Amirul Syafiq and Jalani, Jamaludin and Abdul Sukor, Jumadi (2015) A comparative study on the position control method of dc servo motor with position feedback by using arduino. In: Engineering Technology International Conference 2015, 10-11 August 2015, Kuta, Bali, Indonesia.

Shamsulkamar, Syaban (2014) Modeling and control of 6-dof of industrial robot by using neuro-fuzzy controller. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Sulong, Muhammad Suhaimi and Vijaya Kumar, Ratana Vellu and Ponniran, Asmarashid and Joret, Ariffuddin 1-ARMBOT: a single DOF Robot Arm using PIC Microcontroller. In: The 3rd Malaysian Technical Universities Conference on Engineering and Technology (MUCEET2009), 20-22 June 2009, Kuantan, Pahang.

T

Tatang, Mulyana and Mohd Than, Mohd Nor and Hanafi, Dirman (2009) A discrete time model of boiler drum and heat exchanger QAD model BDT 921. In: International Conference on Instrumentation, Control & Automation, 20-22 Oktober 2009, Bandung, Indonesia.

W

Wahyudi, Wahyudi and Jalani , Jamaludin Design and implementation of fuzzy logic controller for intelligent gantry crane system. In: The 2nd International Conference on Mechatronics (ICOM 05), 10-12 May 2005, Gombak, Kuala Lumpur.

Wan Kadir, Wan Muhamad hanif and Samin , Reza Ezuan and KSM Kader Ibrahim, Babul Salam Internet controlled arobotic arm. In: International Symposium on Robotics and Intelligent Sensors 2012 (IRIS 2012), 4-6 September 2012, Kuching, Sarawak.

Y

Yusof, Ahmad Muhyiddin (2013) Comparative study of conventional PID and fuzzy-PID for DC motor speed control. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Z

Zulkifli, Shamsul Aizam and Ahmad, Md Zarafi and Hamdan, Rohaiza and Jalaludin, Nor Anija and Nurul-Aliaa, Nurul-Aliaa (2007) Performance comparison of PID controller on SVC and TCSC to the transmission line. In: 1st Engineering Conference (EnCon 2007), 28 December 2007, Universiti Malaysia Sarawak, Sabah.

This list was generated on Thu Sep 21 16:52:25 2017 MYT.