Items where Subject is "T Technology > TJ Mechanical engineering and machinery > TJ255-265 Heat engines"

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Creators | Item Type
Jump to: A | B | D | E | H | I | K | M | N | O | R | S | T | W | Y
Number of items at this level: 56.

A

A. A. Emhemed, Abdulrahman and Mamat, Rosbi and Hanafi, Dirman (2012) Mathematical modeling of industrial heat exchanger system. Applied Mechanics and Materials, 229 . pp. 2122-2124. ISSN 1660-9336

Abdullah, Mohammad Kamil and Firdauz, Amon and Mohd Ali, Mas Fawzi (2014) Parametric study on geometrical arrangement of sister hole. In: International Integrated Engineering Summit (IIES 2014), 1-4 December 2014, Universiti Tun Hussein Onn Malaysia, Johor.

Alakashi, Abobaker Mohammed (2011) Numerical study on heat transfer and fluid flow characteristic of tube bank with integral wake splitters (Effect of wake splitter length). Masters thesis, Universiti Tun Hussein Onn Malaysia.

Alfan, Norman Hafizi (2013) Analysis of characteristic heat pipe as an efficient cooling heat transfer device. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ali, Firdaus (2015) Measuring misalignment of valve seats using eddy current inspection method. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Alimin, Ahmad Jais and Ismail, Muhammad Yusri and Osman, Shahrul Azmir (2014) Predicting the performance and emissions characteristics of a medium duty engine retrofitted with compressed natural gas system using 1-dimensional software. Applied Mechanics and Materials, 660 . pp. 468-473. ISSN 1662-7482

Amirnordin, Shahrin Hisham and Wan Salim, Wan Saiful-Islam and Mohideen Batcha, Mohd Faizal and Md Seri, Suzairin and Mohamad, Akmal Nizam and Alimin, Ahmad Jais and Rhagavan, Vijay R. (2010) Optimal flow parameters of louvered fin heat exchangers for automotive and air-conditioning applications. Other thesis, Universiti Tun Hussein Onn Malaysia.

B

Bakar, N. A. and Aman, Fazlina and Mohamad, Mahathir and Roslan, Rozaini (2014) Natural convection heat transfer in two-square duct annuli filled with a nanofluid. In: International Integrated Engineering Summit (IIES 2014), 1-4 December 2014, Universiti Tun Hussein Onn Malaysia, Johor.

D

Daud, Nur Atiqah (2014) Modeling and control of heat exchanger by using bio-inspired algorithm. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Daud, Nur Atiqah and Md Salleh, Salihatun (2014) Modeling of heat exchanger by using bio-inspired algorithm. Applied Mechanics and Materials, 660 . pp. 831-835. ISSN 1662-7482

Didane, DJamal Hissein and Woon, Qiu Yik and Md Seri, Suzairin and Amirnordin, Shahrin Hisham (2014) Effects of geometrical parameters to the performance of louvered fin heat exchangers. In: International Integrated Engineering Summit (IIES 2014), 1-4 December 2014, Universiti Tun Hussein Onn Malaysia, Johor.

E

Emhemed, A. A. Abdulrahman and Hanafi, Dirman Comparison of control modes focus on real heat exchanger system. In: Postgraduate Seminar 2010, 29th and 30th November 2010, Universiti Tun Hussein Onn Malaysia.

H

Hanafi, Dirman and Mohd Than, Mohd Nor and A.A. Emhemed, Abdulrahman and Mulyana, Tatang and Mohd Zaid, Amran and Johari, Ayob (2011) Heat exchanger’s shell and tube modeling for intelligent control design. In: International Conference on Computer and Communication Devices, 1-3, April 2011, Bali Island, Indonesia.

I

Ismail, Muhammad Yusri (2014) One-dimensional simulation of a retrofitted medium duty engine running using compressed natural gas. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ismoen, Muhaimin and Ishak , Hashim and Mohd, Noor Fadiya (2010) Heat-transfer analysis of mhd flow due to a permeable shrinking sheet embedded ina porous medium with internal heat generation. Journal of Porous Media, 3 (9). pp. 847-854. ISSN 1091028X

Ismoen, Muhaimin and Kandasamy, Ramasamy (2010) Lie group analysis for the effect of temperature-dependent fluid viscosity and thermophoresis particle deposition on free convective heat and mass transfer under variable stream conditions. Applied Mathematics and Mechanics , 31 (3). pp. 317-328. ISSN 02534827

Ismoen, Muhaimin and Kandasamy, Ramasamy and Abdul Kahar, Rosmila (2011) Scaling group transformation for boundary-layer flow of a nanofluid past a porous vertical stretching surface in the presence of chemical reaction with heat radiation. Computers and Fluids, 52 (1). pp. 15-21. ISSN 00457930

Ismoen, Muhaimin and Kandasamy, Ramasamy and Hashim, Ishak (2010) Effect of chemical reaction, heat and mass transfer on nonlinear boundary layer past a porous shrinking sheet in the presence of suction. Nuclear Engineering and Design, 240 (5). pp. 933-939.

Ismoen, Muhaimin and Kandasamy, Ramasamy and Hashim, Ishak (2010) Scaling transformation for the effects of chemical reaction on free convective heat and mass transfer in the presence of variable stream conditions. Chemical Engineering Research and Design, 88 (10). pp. 1320-1328.

Ismoen, Muhaimin and Kandasamy, Ramasamy and Ishak, Hashim (2009) Thermophoresis and chemical reaction effects on MHD mixed convective heat and mass transfer past a porous wedge with variable viscosity in the presence of viscous dissipation. International Journal of Computational Methods in Engineering Science and Mechanics, 10 (3). pp. 231-240. ISSN 15502287

Ismoen, Muhaimin and Kandasamy, Ramasamy and Ishak , Hashim (2009) Thermophoresis and chemical reaction effects on non-Darcy MHD mixed convective heat and mass transfer past a porous wedge in the presence of variable stream condition. Chemical Engineering Research and Design, 87 (11). pp. 1527-1535. ISSN 02638762

Ismoen, Muhaimin and Kandasamy, Ramasamy and Ishak , Hashim (2009) Thermophoresis and variable viscosity effects on MHD mixed convective heat and mass transfer past a porous wedge in the presence of chemical reaction. Heat and Mass Transfer/Waerme- und Stoffuebertragung, 45 (6). pp. 703-712. ISSN 09477411

Ismoen, Muhaimin and Kandasamy, Ramasamy and Ishak , Hashim and Kasmani, Ruhaila (2008) Thermophoresis and chemical reaction effects on non-Darcy mixed convective heat and mass transfer past a porous wedge with variable viscosity in the presence of suction or injection. Nuclear Engineering and Design, 238 (10). pp. 2699-2705. ISSN 00295493

Ismoen, Muhaimin and Kandasamy, Ramasamy and Khamis, Azme (2009) Numerical investigation of variable viscosities and thermal stratification effects on MHD mixed convective heat and mass transfer past a porous wedge in the presence of a chemical reaction. Applied Mathematics and Mechanics (English Edition), 30 (11). pp. 1353-1364. ISSN 02534827

Ismoen, Muhaimin and R., Kandasamy and L., Loganathan and Puvi, Arasu (2011) Lie group analysis for thermal-diffusion and diffusion-thermo effects on free convective flow over a porous stretching surface with variable stream conditions in the presence of thermophoresis particle deposition. Nonlinear Analysis: Hybrid Systems, 5 (1). pp. 20-31. ISSN 1751570X

K

Kandasamy, Ramasamy and Ismoen, Muhaimin and Saim, Hashim (2010) Lie group analysis for the effects of temperature-dependent fluid viscosity and chemical reaction on MHD free convective heat and mass transfer with variable stream conditions. Nuclear Engineering and Design, 240 (1). pp. 39-46.

Khalid , Amir and Jaat, Norrizam (2016) Effects of ambient density on flow characteristics of biodiesel spray injection using computational fluid dynamics. ARPN Journal of Engineering and Applied Sciences, 11 (8). pp. 1-7. ISSN 1819-6608

Khalid , Amir and Zaman, Izzuddin and Mohd Tobi, Abd Latif and Manshoor, Bukhari (2016) New approach of dynamic vibration absorber made from natural fibres composite. ARPN Journal of Engineering and Applied Sciences, 11 (4). pp. 1-6. ISSN 1819-6608

M

Md Seri, Suzairin and Mohideen Batcha, Mohd Faizal and Raghavan, Vijay R. (2009) Heat transfer studies in tube banks with integral wake splitters. International Journal of Integrated Engineering, 1 (1). pp. 23-29. ISSN 1985-854X

Mohammed, Akmal Nizam and Ismail, Farzad (2015) Entropy consistent methods for the Navier-Stokes Equations. Journal of Scientific Computing, 63 (2). pp. 612-631. ISSN 0885-7474

Mohammed Hayder, Ali (2014) Numerical study of jet impingement cooling on a smooth curve surface. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Atan, Mohd Nazrul Ikram (2015) Experimental investigation on ethanol-petrol blends operating with a petrol engine. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Yunos, Siti Nur Mariani and Abdul Ghafir, Mohammad Fahmi and Ab Wahab, Abas (2015) Emission prediction model for multidisciplinary assessment framework. In: International Conference on Advances in Mechanical, Aeronautical and Production technique (MAPT 2015), 11-12 April 2015, G Tower Hotel, Kuala Lumpur, Malaysia.

Mokhtar, Azizul and Atan, Nazrul and Rahman, Najib and Khalid, Amir (2014) Review of performance and emmissions characteristics of bio-additive fuel on SI engine fuelled by biopetrol. In: International Integrated Engineering Summit (IIES 2014), 1-4 December 2014, Universiti Tun Hussein Onn Malaysia, Johor.

Muhalhal, Hasan Abduallatif (2014) Experimental study of heat transfer characteristics of round air jet impinging on convex surface. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Muhsin Al-Juhaishi, Lafta Flayih (2014) Numerical analysis of a fin-tube plate heat exchanger with winglets. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mulyana, Tatang (2014) Parametric and nonparametric identification of shell and tube heat exchanger mathematical model. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Mulyana, Tatang and Mohd Than, Mohd Nor (2010) Modelling and simulation of co-current shell and tube heat exchanger model HE158c. In: Proceeding on Post Graduate Seminar, UTHM Johor, Malaysia.

Mulyana, Tatang and Mohd Than, Mohd Nor and Mustapha, Noor Adzmira (2011) Identification of heat exchanger qad model BDT 921 based on hammerstein-wiener model. In: International Seminar on the Application of Science and Mathematics 2011, 1 - 3 November 2011, Putra World Trade Centre, Kuala Lumpur.

Mulyana, Tatang and Suhaimi, Farah Najaa and Hanafi, Dirman and Mohamad Nor, Mohd Than (2011) ARX Model of four types heat exchanger identification. In: Malaysian Technical Universities International Conference on Engineering and Technology (MUiCET'11), 13-15 November 2011, Batu Pahat, Malaysia.

N

Noranai, Zamri (2016) Development of thermal energy storage simulation and modelling for high capacity building. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Noranai, Zamri and Salleh, Hamidon and Md Yusof, Mohammad Zainal (2011) Energy cost reduction by partially operation of thermal energy storage based on building load profile. In: International Conference on Environment Science and Engineering (ICESE 2011), 1-3, April 2011, Bali Island, Indonesia.

O

Osman, Shahrul Azmir (2014) Characterization of A C.I. engine operated using retrofit monogas fuelling concept. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Othman, Nurul Hasanah (2014) System identification of heat exchanger using generalized poisson moment functional (GPMF). Masters thesis, Universiti Tun Hussein Onn Malaysia.

R

Rahman, Mohd Najib and Atan, Nazrul and Mokhtar, Azizul and Khalid, Amir (2014) Influences of intake temperature and bio-petrol fuel temperature on SI engine: an overview. In: International Integrated Engineering Summit (IIES 2014), 1-4 December 2014, Universiti Tun Hussein Onn Malaysia, Johor.

Ramsy, Him and Ahmad, Thahir and Jaat, M. and Khalid, Amir (2014) Influences of cylinder wall temperature on heat release during compression period. Applied Mechanics and Materials, 660 . pp. 431-435. ISSN 1662-7482

Roslan, Rozaini and Saleh, H. and Hashim, I. (2014) Natural convection in a differentially heated square enclosure with a solid polygon. The Scientific World Journal, 2014 . ISSN 1537-744X

S

Sadikin, Azmahani and Asmuin, Norzelawati (2013) Two-phase flow pressure drop model for a shell side of a shell of heat exchanger. Applied Mechanics and Materials , 465 . pp. 613-616. ISSN 1660-9336

Salleh, Hamidon and Yee, Jingzu and Azahari, Razali (2014) Experimental study on film cooling effectiveness of shallow hole with upstream sister holes. In: International Integrated Engineering Summit (IIES 2014), 1-4 December 2014, Universiti Tun Hussein Onn Malaysia, Johor.

Sasi Koshad , Rabia Abrahim (2011) CFD simulation of heat transfer in vertical ribbed tube. Masters thesis, Universiti Tun Hussein Onn Malaysia.

T

Tajaldin Moner, Mawahwab Abdalhamid (2013) Experimental study of heat transfer distribution between an obliquely smooth flat plate and impinging air jet from circular nozzle. Masters thesis, Universiti Tun Hussein Onn Malaysia.

W

Wee, Yong Kok (2007) Analysis of flow and heat transfer over louvered fins in compact geometries. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Y

Yahaya, Mohd Zubir (2013) Evaluation of heat exchanger on thermoacoustic performance. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Yii, Ronny Shi Chin and Amirnordin, Shahrin Hisham and Khalid, Amir (2014) Effects of nozzle shape on the flow characteristics of premix injector using computational fluid dynamics (CFD). In: International Integrated Engineering Summit (IIES 2014), 1-4 December 2014, Universiti Tun Hussein Onn Malaysia, Johor.

Yii, Ronny Shi Chin and Khalid, Amir and Abd Ghani, Abd Malek and Mohamed Issak, Mahad and Amirnordin, Shahrin Hisham (2015) A comparison between the fractal and swirl injector of diesel spray characteristics in the burner system. In: International Engineering Research and Innovation Symposium 2015 (IRIS), 12–13 September 2015, Putrajaya, Malaysia.

Yusof, Humairak and Tamaldin, Noreffendy and M. F. B, Abdollah and Khalid , Amir (2015) Evaluation of the storage effect on the fuel properties for variety biodiesel blends. ARPN Journal of Engineering and Applied Sciences, 10 (17). pp. 1-5. ISSN 1819-6608

This list was generated on Sun Oct 22 21:54:26 2017 MYT.