Items where Subject is "T Technology > TK Electrical engineering. Electronics Nuclear engineering > TK1001-1841 Production of electric energy or power. Powerplants. Central stations"

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Creators | Item Type
Jump to: | A | B | C | D | E | G | H | I | J | K | L | M | N | P | R | S | T | W | Y | Z
Number of items at this level: 110.

Abdul Rahim, Siti Rafidah and Azmi, Syahrul Ashikin and Sulaiman, Mohd Herwan and Hussain , Muhamad Hatta and Zawawi, Siti Nor Baizura (2009) A study on optimization techniques for the sizing of DG in distribution system. In: International Conference: Electrical Energy and Industrial Electronic Systems EEIES2009, 7-8 December 2009, Penang.

A

Ab Aziz, Aizuriza (2014) Topsis method for load shedding scheme in Johore system. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abd Hadi, Faezah (2012) The development of solar irradiation levelling system using colour contour approach. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abd Rashid, Wan Norhisyam (2013) Optimal load shedding for microgrids with limited DGs (application in Perwaja Steel Sdn Bhd). Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdul Hadi Kadim, Ilham (2015) Study the electrical stress withstand properties of heated refined bleached and deodorized palm oil dielectrics. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdul Rahim , Muhd Halalluddin (2012) Design and simulation of three phase rectifier with power factor correction. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdull Kadir, Junaini (2013) Development of a boost convertor for photovoltaic system MPPT using fuzzy logic control. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdullah, Mohd Noor and Bakar, A. H. A. and Mokhlis, Hazlie and Jamian, J. J. (2015) An efficient constraint handling approach for economic load dispatch problem with non-smooth cost function. In: 9th International Power Engineering and Optimization Conference (PEOCO 2015), 18-19 March 2015, Hotel Equatorial, Melaka.

Abdullah, Mohd Noor and Bakar, A. H. A. and Rahim, N. A. and Jamian, J. J. and Aman, M. M. (2012) Economic dispatch with valve point effect using iteration particle swarm optimization. In: 47th International Universities Power Engineering Conference (UPEC 2012), 4-7 September 2012, London.

Abu Bakar, Afarulrazi and Utomo, Wahyu Mulyo and Liew, K.L. and Zarafi, M. Solar tracker robot using microcontroller. Business, Engineering and Industrial Applications (ICBEIA), 2011 International Conference .

Abu Zarim, Mohamad Abu Ubaidah Amir and Mohd Sharip, Rina (2013) Control strategies to optimise power output in heave buoy energy convertors. In: International Conference on Mechanical Engineering Research (ICMER2013), 1-3 July 2013, Kuantan, Pahang.

Abubakar, Malala Abubakar (2016) Effects of voltage sag during starting of an induction motor. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ahmad, Md Zarafi and Sulaiman, Erwan and Haron, Zainal Alam and Kosaka, T. (2013) Design improvement of a new outer-rotor hybrid excitation flux switching motor for in-wheel drive EV. In: IEEE 7th International Power Engineering and Optimization Conference (PEOCO 2013), 3-4 June 2013, Langkawi, Malaysia.

Ahmad, Md Zarafi and Sulaiman, Erwan and Haron, Zainal Alam and Kosaka, T. (2013) Impact of rotor pole number on the characteristics of outer-rotor hybrid excitation flux switching motor for in-wheel drive EV. In: 4th International Conference on Electrical Engineering and Informatics (ICEEI 2013) , 24-25 June 2013, Universiti Kebangsaan Malaysia.

Ahmad, Md Zarafi and Sulaiman, Erwan and Jenal, Mahyuzie and Utomo, Wahyu Mulyo and Zulkifli, Shamsul Aizam and Abu Bakar, Afarulrazi (2013) Design investigation of three phase HEFSM with outer-rotor configuration. In: 2013 IEEE International Conference on Clean Energy and Technology (CEAT 2013), Bayview Hotel, Langkawi, 18-20 November 2013.

Ahmad, Mohd Khairul (2012) Improvement in performances of dye-sensitized solar cell based on nanostructured rutile-phased Ti02. PhD thesis, Shizuoka University.

Ahmad , Afandi and Krill, Benjamin and Rabah, Abbes (2010) Efficient architectures for 3D HWT using dynamic partial reconfiguration. Journal of Systems Architecture, 56 (8). pp. 305-316. ISSN 1383-7621

Ahmed Hendi Gareh , Saleh Ali (2012) Voltage stability assessment for distributed generation in islanded microgrid system. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Alzalet, Abdusalam Rajb (2014) Dynamic load forecasting for commercial power network. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Anak Selat, Mark (2013) Prototype modeling and mathematical approach for the evaluation and measurement of a parabolic trough reflector. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Asad, Muhammad Mujtaba (2014) Matlab based modeling and simulink package for dc-dc boost convertor to enhance learning process of power electronics. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Azizan, Abdul Rahman (2013) Simulation of dynamic load effect on power system frequency. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Azizan, Mohd Syukur (2015) Development of differential evolution based power system stabilizer (pss) with hvdc in small signal stability analysis using matlab. Masters thesis, Universiti Tun Hussein Onn Malaysia.

B

Bachok @ Tunderang, Sallehuddin (2016) Development of time delay current controller using raspberry pi for 3 phase active power filter for nonlinear load improvement. Masters thesis, Universiti Tun Hussein Onn Malaysia.

C

C.F. , Soon and M. , Youseffi and R.F. , Berends and N. , Blagden and M.C.T. , Denyer (2013) Development of a novel liquid crystal based cell traction force transducer system. Biosensors and Bioelectronics, 39 . ISSN 09565663

Charles, Udechukwu Chukwuemeka (2011) Power quality analysis and mitigation. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Che Ros, Ziana (2013) Optimal location of capacitor bank for power losses minimization. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Chua, H. G. and Kok, Boon Ching and Goh, Hui Hwang (2012) Solar insolation forecast using artificial neural network for Malaysian weather. In: 3rd International Conference on Engineering and ICT (ICEI 2012), 4 - 6 April 2012, Melaka, Malaysia.

Chua, Hock Guan (2013) Power dispatch of hybrid photovoltaic-genset system using heuristic bio-inspired approach. Masters thesis, Universiti Tun Hussein Onn Malaysia.

D

Dawood, Mohammed Ahmed (2016) Improvement of power quality using unified power quality conditioner. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Diaw, King Eh Sut (2014) FPGA based maximum power point tracking of photovoltaic system. Masters thesis, Universiti Tun Hussein Onn Malaysia.

E

E, Sulaiman and T, Kosaka and N, Matsui and M, Z. Ahmad (2011) Design improvement and performance analysis of 12slot-10pole permanent magnet flux switching machine with field excitation coils. In: The 5th International Power Engineering and Optimization Conference (PEOCO2011), 6-7 June 2011, Shah Alam, Selangor, Malaysia.

Eh Kan, Chessda Uttraphan and Kok , Boon Ching and Zulkifli, Shamsul Aizam and Lai , K.H. (2007) Development of a microcontroller-based power factory corrector. In: 1st Engineering Conference on Energy and Environment, 27-28 December 2007, Kuching, Sarawak.

Eldagdag , Nabil Musbah (2013) Constant DC output boost converter for solar system sourace model. Masters thesis, Universiti Tun Hussein Onn Malaysia.

G

Goh, Hui Hwang and Chua, Q. S. and Lee, S. W. and Kok, Boon Ching and Goh, Kai Chen and Teo, K. T. K. (2015) Comparative study of line voltage stability indices for voltage collapse forecasting in power transmission system. In: World Academy of Science, Engineering and Technology (WASET 2015), 11-12 February 2015, Rio De Janeiro, Brazil.

Goh, Hui Hwang and Chua, Q. S. and Lee, S. W. and Kok, Boon Ching and Goh, Kai Chen and Teo, K. T. K. (2014) Line voltage stability indices based on precautionary measure approximation in smart grid. In: Proceedings of the 11th International Conference of Innovation and Management (ICIM 2014), 17-19 November 2014, Vaasa, Finland.

Goh , Hui Hwang and Kok , Boon Ching (2010) Application of analytic hierarchy process (AHP) in load shedding scheme for electrical power system. In: 2010 9th International Conference on Environment and Electrical Engineering (EEEIC), 16-19 May 2010, Prague, Czech Republic.

Goh , Hui Hwang and Kok , Boon Ching (2011) A unique load shedding application in a large pulp mill electrical system. In: 9th International Conference on Environment and Electrical Engineering (EEEIC2009), 16-19 May 2010, Prague, Czech Republic.

Goh , Hui Hwang and Kok , Boon Ching and Alias, M. F. Embedded power generation studies in a large scale local power system. In: 3rd International Power Engineering and Optimization Conference (PEOCO 2009) , 3-4 June 2009, Shah Alam, Selangor.

Goh , Hui Hwang and Kok , Boon Ching and Looi , Ming Sum (2010) A study of induction motor starting methods in terms of power quality. In: 3rd Engineering Conference on Advancement in Mechanical and Manufacturing for Sustainable Environment, 14-16 April 2010, Kuching, Sarawak.

Goh , Hui Hwang and Kok , Boon Ching and Pang, Che Fong and Haron, Zainal Alam and Abdul Shukor, Mohd Azlan (2012) Analytic hierarchy approach of load shedding (LS) scheme in an islanded power system. Other thesis, Universiti Tun Hussein Onn Malaysia.

Goh , Hui Hwang and Lee, S. W. and Goh, Kai Chen and Seow , Ta Wee and Teo, K. T.K. T. (2013) Load shedding scheme in large pulp mill by using analytic hierarchy process and fuzzy analytic hierarchy process. In: Seminar Hasil Penyelidikan Sektor Pengajian Tinggi Kementerian Pendidikan 2013, 2-3 July 2013, Universiti Utara Malaysia, Kedah.

H

H., H. Goh and B., C. Kok and S., W. Lee and A. A., Mohd Zin Load shedding scheme in large pulp mill by using analytic hierarchy process. In: Global Conference on Power Control and Optimization, 2-4 December 2010, Kuching, Malaysia.

Hamzah, Ahmad Azlan (2014) Effect of gap lenghts of sphere-sphere electrodes on air breakdown level under lightning impulse. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Hanzah, Nurulhuda (2013) Intelligent power system protection data management. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Hashim, Mokhtar (2013) Optimization of stand-alone photovoltaic system by implementing fuzzy logic MPPT controller. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Hashim, Nurul ‘Izzati (2013) Investigation of numerical technique to evaluate frequency response analysis (FRA) data measurement of auto power transformer. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Hwang, Goh Hui and Ching, Kok Boon and Samsuddin, M. Z. Economic dispatch studies for IEEE 14-bus distribution. In: 3rd International Power Engineering and Optimization Conference (PEOCO 2009) , 3-4 June 2009, Shah Alam, Selangor.

I

Ibrahim, Noor Azliza (2012) Modeling of micro hydroelectric system design. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ibrahim, Zarina (2014) A comparative study of the AHP and Topsis methods for implementing load shedding scheme in a pulp mill system. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Isrihetty, S. and Nayan, Nafarizal and Saim, Hashim (2010) Analysis and characterisation of TiO2 thin film derived from titanium butoxide. In: 3rd International Conference on Functional Material and Devices 2010 (ICFMD2010), 13-17 June 2010 , Terengganu, Malaysia .

Izazu, Nur Zuriani (2013) Decision-making on pv modules for very large scale photovoltaic systems using improved analytic hierarchy process. Masters thesis, Universiti Tun Hussein Onn Malaysia.

J

Jafar, Nurul ‘Ain and Rahimi, Siti Khalidah and Zakaria, Siti Nur Umira and Sulaiman, Erwan (2014) Performance analysis of 12S-10P hybrid-excitation flux switching machines for HEV. In: The 2nd Power and Energy Conversion Symposium (PECS 2014) , 12th May 2014 , Universiti Teknikal Malaysia,Melaka.

Jakuil, Alester G (2013) Multi criteria decision making on load shedding scheme in an islanded system. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Jamal, Noor Zaihah (2013) Multi-criteria selection for load shedding scheme using analytical hierarchy process (AHP) in electrical power system. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Jamaludin, Mohd Nor Aidi (2013) Off grid PICO hydro power generator utilizing household water supply. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Jamian, J. J. and Aman, M. M. and Mustafa, M. W. and Jasmon, G. B. and Mokhlis, Hazlie and bakar, A. H. A. and Abdullah, Mohd Noor (2011) Optimum multi DG units placement and sizing based on voltage stability index and PSO. In: 2012 47th International Universities Power Engineering Conference (UPEC).

Jamian, J.J and Mustafa, Mohd Wazir and Mokhlis, Hazlie and Abdullah, Mohd Noor (2012) Comparative study on distributed generator sizing using three types of particle swarm optimization. In: Third International Conference on Intelligent Systems, Modelling and Simulation (ISMS 2012), 8-10 February 2012, Kota Kinabalu.

Jumaat, Siti Amely and Musirin, Ismail and Othman, M. M. and Mokhlis, Hazlie (2013) MOPSO approach for FACTS device installation in power system. In: 2013 IEEE 7th International Power Engineering and Optimization Conference (PEOCO2013), 3-4 June 2013, Langkawi, Malaysia.

Jumaat, Siti Amely and Musirin, Ismail and Othman, Muhammad Murtadha and Mokhlis, Hazlie Transmission loss minimization using SVC based on particle swarm optimization. Industrial Electronics and Applications (ISIEA), 2011 IEEE .

K

Kamarudin, Mohd Khairul Shazril (2013) Two way power flow in advance distributions and micro grid. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Kamaruzaman, Ahmad Khairul Radhi (2013) Optimal combined load forecast based on multi-criteria decision making methods. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Kandasamy, Ramasamy and Muhaimin, Ismoen (2015) Impact of thermal stratification on unsteady hiemenz non- darcy copper nanofluid flow over a porous wedge in the presence of magnetic field due to solar radiation (green) energy. Chemical and Process Engineering Research, 36 . pp. 31-46. ISSN 22247467

Kok, Boon Ching and Goh, Hui Hwang and Chua, H. G. (2012) Optimal power tracker for stand-alone photovoltaic system using Artificial Neural Network (ANN) and Particle Swarm Optimisation (PSO). In: International Conference on Renewable Energies and Power Quality (ICREPQ’12), 28-30 March 2012, Spain.

Kok, Boon Ching and Haron, Zainal Alam and Pang, Che Fong and Goh , Hui Hwang and Ponniran, Asmarashid and Eh Kan, Chessda Uttraphan and Ismail, Muhammad Nafis and Chua, Hock Guan (2012) Optimal power dispatch of hybrid PV/diesel systems using heuristic bio-inspired algorithms. Other thesis, Universiti Tun Hussein Onn Malaysia.

L

Liau, Agnes Siau Wei (2014) Stability assessment of 132kV Sabah grid-connected solar PV system. Masters thesis, Universiti Tun Hussein Onn Malaysia.

M

Mahmood, Haslina (2014) Analytical hierarchy approach for load shedding scheme: a case study based on the Johor system. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mahmood Almuhaya, Mukarram Abduljalil (2013) FPGA based maximum power point tracking controller for photovoltaic system. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Masdar, Aizan and KSM Kader Ibrahim, Babul Salam and Abdul Jamil, M. Mahadi and Hanafi, Dirman and Ahmad, M. K. I. and Rahman, K.A.A (2013) Current source with low voltage controlled for surface electrical stimulation. In: IEEE 9th International Colloquium on Signal Processing and its Applications (CSPA 2013) , 8-10 March 2013, Kuala Lumpur.

Mazlan, Mohamed Mubin Aizat and Husin , Zhafir Aizat and Syed Othman , Syed Muhammad Naufal and Sulaiman, Erwan (2014) Design study of single phaseinner-rotor hybrid excitation flux switching motor for hybrid electric vehicles. In: The 2nd Power and Energy Conversion Symposium (PECS 2014) , 12 May 2014, Universiti Teknikal Malaysia,Melaka .

Mohamad Amin, Nur Aqilah (2013) Power system transient stability analysis using matlab software. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohammad Radzi, Nur Hanis and Bansal, R. C. and Dong, Z. Y. and Hassan, M. Y. (2011) A modified postage-stamp coverage method for local load case of transmission service charges. In: 4th International Conference on Electric Utility Deregulation and Restructuring and Power Technologies (DRPT 2011), 6-9 July 2011, Weihai, Shandong.

Mohammad Radzi, Nur Hanis and Bansal, R. C. and Dong, Z. Y. and Lu, Z. Novel transmission pricing methodologies with integration of renewable generation for Australian NEM. In: Talent Management Symposium (TMS 2012) , 11-12 July 2012, Australia.

Mohd Hanif, Asyikin Sasha and Mohamad, Fariza and Zakaria, Razmi Zafiruddin (2015) Cyclic voltammetry measurement for n-type Cu2O thin film using copper acetate-based solution. In: International Conference on Electrical and Electronic Engineering 2015 (IC3E 2015), 10-11 August 2015, Melaka, Malaysia.

Mohd Radzi, Mohd Zulhisham (2013) Optimal allocation and sizing of distributed generation using particle swarm optimization in distribution system. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Moris, Alexsteir (2014) Critical point study in the Sabah power grid for cascading failure blackouts. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mustapha, Nik Mohd. Zaitul Akmal (2013) Optimal load shedding for microgrids with unlimited DGs. Masters thesis, Universiti Tun Hussein Onn Malaysia.

N

Ngadiron, Zuraidah and Mohammad Radzi, Nur Hanis and Yassin, Zaris (2014) Generation revenue assessment in Malaysia electricity supply industry. In: International Integrated Engineering Summit (IIES 2014), 1-4 December 2014, Universiti Tun Hussein Onn Malaysia, Johor.

Ngadiron, Zuraidah and Mohammad Radzi, Nur Hanis and Yassin, Zaris and Amin, Izzati (2014) Review on restructuring of Malaysia electricity supply industry. In: International Integrated Engineering Summit (IIES 2014), 1-4 December 2014, Universiti Tun Hussein Onn Malaysia, Johor.

P

Ponniran, Asmarashid (2012) A reability study on stand-alone electric solar system for domestic usage. Other thesis, Universiti Tun Hussein Onn Malaysia.

R

Radzi, Nur Hanis and Bansal, R.C. and Dong, Z.Y. and Hasan, K.N. and Lu, Z. Overview of the Australian national electricity market transmission use of system charges for integrating renewable generation to existing grid. Generation, Transmission & Distribution, IET .

Rahimi, Siti Khalidah and Jafar, Nurul ‘Ain and Sulaiman, Erwan and Zakaria, Siti Nur Umira (2014) Design investigation of hybrid excitation flux switching machine for high-speed electric vehicles. In: The 2nd Power and Energy Conversion Symposium (PECS 2014) , 12 May 2014, Universiti Teknikal Malaysia,Melaka .

Ramlee, Nor Asrina (2012) Detection of voltage disturbances in power quality using wavelet transforms. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Rasdi, Normalina (2013) A novel technique for non-interuppted replacement ups system with the integration of portable transfer switch (PTS). Masters thesis, Universiti Tun Hussein Onn Malaysia.

Rasmin, Kasmawati (2014) Planning and impact of distributed generation in SESB existing system. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Razali, Maimunah (2011) Classification and identification of power quality events using ANOVA and wavelet transform. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Riyaz Ahmad , Mohamed Ali and Nayan, Nafarizal (2010) Growth of TiO2 thin film on various substrates using RF magnetron sputtering. Universiti Tun Hussein Onn Malaysia. (Unpublished)

Rosly, Nurhayati and Mohd, Sofian (2014) The application of the micro-siting technique in Tioman Island, Malaysia using the RIAM-COMPACT software. Applied Mechanics and Materials, 660 . pp. 745-749. ISSN 1662-7482

S

Salimin, Surian (2014) Low order harmonics mitigation in grid connected, parallel PV inverters. PhD thesis, Newcastle University.

Senain, Isrihetty and Nayan, Nafarizal and Saim, Hashim Effect of poltethylene glycol on structural and electrical properties of TiO2 thin film derived from sol-gel technique. In: International Conference on Enabling Science and Nanotechnology (ESciNano 2010), 8-10 Disember 2010, Kuala Lumpur.

Siagian, Caroline Dame (2013) Risk assessment in power system using multi-criteria decision making (MCDM) methods. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Soomro, Dur Muhammad and Omran, M. A. and Alswed, S. K. (2015) Design of a shunt active caused by nonlinear loads power filter to mitigate the harmonics caused by nonlinear loads. In: International Conference on Electrical and Electronic Engineering 2015 (IC3E 2015), 10-11 August 2015 , Melaka, Malaysia.

Soomro, Irfan Ali and Baharom, Md Nor Ramdon (2013) Comparison between partial discharge in paper and impregnated paper insulators used in power transformer winding based on ultra-high frequency (UHF) detection method. In: International Research Conference, 26-27 September 2013, Kuala Lumpur .

Soon , Ching Chun (2015) Development of a hybrid solar wind turbine for sustainable energy storage. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Sulaiman, Erwan (2012) Design studies on less rare-earth and high power density flux switching motors with hybrid excitation/ wound field excitation for HEV drives. PhD thesis, Nagoya Institute of Technology.

Sulaiman, Erwan and Amin, N. S. M. and Husin, Z. A. and Ahmad, Md Zarafi and Kosaka, T. (2013) Design study and analysis of hybrid excitation flux switching motor with DC excitation in radial direction. In: IEEE 7th International Power Engineering and Optimization Conference (PEOCO 2013), 3-4 June 2013, Langkawi, Malaysia.

Sulaiman, Erwan and Khan, F. and Ahmad, Md Zarafi and Jenal, Mahyuzie and Utomo, Wahyu Mulyo and Zulkifli, Shamsul Aizam and Abu Bakar, Afarulrazi (2013) Investigation of field excitation switched flux motor with segmental rotor. In: 2013 IEEE International Conference on Clean Energy and Technology (CEAT 2013), Bayview Hotel, Langkawi, 18-20 November 2013.

Sulaiman, Erwan and Kosaka, T. and Matsui, N. Design optimization of 12Slot-10Pole hybrid excitation flux switching synchronous machine with 0.4kg permanent magnet for hybrid electric vehicles. 8th International Conference on Power Electronics - ECCE Asia .

Sulaiman, Erwan and Kosaka, Takashi and Nobuyuki, Matsui (2011) A new structure of 12Slot-10Pole field-excitation flux switching synchronous machine for hybrid electric vehicles. In: 14th European Conference on Power Electronics and Applications (EPE 2011), 30 August - 11 September 2011, Birmingham.

Sulaiman, Erwan and Teridi, M. F. M. and Husin, Z. A. and Ahmad, Md Zarafi and Kosaka, T. (2013) Investigation on flux characteristics of field excitation flux switching machine with single FEC polarity. In: 4th International Conference on Electrical Engineering and Informatics (ICEEI 2013), 24-25 June 2013, Universiti Kebangsaan Malaysia.

Sulaiman, Erwan and Teridi, M. F. M. and Husin, Z. A. and Ahmad, Md Zarafi and Kosaka, T. (2013) Performance comparison of 24S-10P and 24S-14P field excitation flux switching machine with single DC-Coil polarity. In: IEEE 7th International Power Engineering and Optimization Conference (PEOCO 2013), 3-4 June 2013, Langkawi, Malaysia.

Syed Jamalil, Syed Akhmal (2013) Solving economic dispatch problem using particle swarm optimization. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Syed Othman, Syed Muhammad Naufal and Sulaiman, Erwan and Mazlan, Mohamed Mubin Aizat and Husin, Zhafir Aizat (2014) Initial design of 12s-10p and 12s-14p with outer-rotor field-excitation flux switching machine. In: The 2nd Power and Energy Conversion Symposium (PECS 2014) , 12 May 2014, Universiti Teknikal Malaysia,Melaka .

T

Tasuki, Norazleen (2014) An optimal load shedding scheme based on the analytical hierarchy approach: a case study of the Selangor Electrical System. Masters thesis, Universiti Tun Hussein Onn Malaysia.

W

Wakiman, Nur Farhanah (2012) Modeling of photovoltaic (PV) module temperature based on ambient factor in Malaysia using ANFIS. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Y

Yap, Aaron Boon Kian and Goh, Kai Chen (2013) Challenges of BIPV application in Malaysian construction industry: a case study in Batu Pahat. In: 1st FPTP Postgraduate Seminar 2013, 23 December 2013, Fakulti Pengurusan Teknologi dan Perniagaan, UTHM .

Z

Zainal, Nurfarina (2014) Rapid melt growth of crystalline germanium for solar energy harvesting applications. PhD thesis, Queen's University of Belfast.

Zakaria, Siti Nur Umira and Rahimi, Siti Khalidah and Jaafar, Nurul Ain and Sulaiman, Erwan (2014) Performances analysis of 6Slot-14Pole e-core hybrid excitation flux switching machine for hybrid electric vehicle. In: The 2nd Power and Energy Conversion Symposium (PECS 2014) , 12 May 2014, Universiti Teknikal Malaysia,Melaka .

Zaratang , Lucian (2013) Load flow studies on stand alone microgrid system in Ranau, Sabah. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Zulkifli, Shamsul Aizam (2015) Voltage oriented controller using dual loops control for power flow in distributed generation network. In: 10th Asian Control Conference (ASCC 2015), 31 May - 3 June 2015, Sutera Harbour Resort, Kota Kinabalu, Sabah.

This list was generated on Thu Apr 27 17:38:14 2017 MYT.