Items where Subject is "T Technology > TK Electrical engineering. Electronics Nuclear engineering > TK2000-2891 Dynamoelectric machinery and auxiliaries"

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Creators | Item Type
Jump to: | A | B | C | D | G | H | I | J | K | M | N | O | P | R | S | U | W | Y | Z
Number of items at this level: 134.

Ali, Hassan and Sulaiman, Erwan and Omar, Mohd Fairoz and Jenal, Mahyuzie (2015) Design studies and performance of a novel 12S- 8P HEFSM with segmental rotor. International Conference on Advanced Mechanics, Power and Energy 2015 (AMPE2015) . pp. 44-52. ISSN 1112-5209

A

Ab Ghani, Mohd Khairul Akli (2014) Development of PID current control for DC motor using ARDUINO. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ab Rahman, Rosdi and Kaamin, Masiri and Suwandi, Amir Khan and Mohd Zan, Norah (2013) Kaedah meningkatkan minat pemelihara ikan akuarium dari sudut pengagihan makanan automatik. In: Proceeding of the International Conference on Social Science Research 2013, 4-6 Jun 2013, Pulau Pinang, Malaysia.

Ab. Hadi, Nik Aznan (2014) Air breakdown under lightning impulse with plane-plane electrode. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdul Latif, Noradila and Ramli, Rizauddin (2010) Pembangunan modul pembelajaran bagi sistem kawalan automasi PLC. In: Persidangan Kebangsaan Pendidikan Kejuruteraan dan Keusahawanan 2010, 25-26 September 2010, Kota Bahru, Kelantan.

Abdul Rahman, Azman (2011) Liquid mixture control system using PLC. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdull Patas, Nor Hasnati (2014) Design study of outer rotor field excitation flux switching motor for electric vehicles. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdullah, Abdul Hadi (2014) Development of P-resonant voltage control for DC motor using Arduino. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ahmad, Md Zarafi and Haron, Zainal Alam and Sulaiman, Erwan (2013) Design studies on 12S-10P outer-rotor HEFSM for in-wheel drive EV applications. In: 2013 IEEE Conference on Sustainable Utilization and Development in Engineering and Technology, 30 May - 01 Jun 2013, MMU Selangor, Malaysia.

Ahmad, Md Zarafi and Idris, N. R. N. and Ismail, Z. H. and Aizam, S. and Rohaiza, H. (2007) Performance evaluation of constant frequency torque controller-based and SVM-based of direct torque control of induction motor drives. In: 1st Engineering Conference (EnCon 2007), 28 December 2007, Universiti Malaysia Sarawak, Sarawak.

Ahmad, Md Zarafi and Sulaiman, Erwan and Haron, Zainal Alam and Khan, Faisal (2014) FEA-based design study of 12-Slot 14-pole outer-rotor dual excitation flux switching machine for direct drive electric vehicle applications. Applied Mechanics and Materials, 660 . pp. 836-840. ISSN 1662-7482

Ahmad, Md Zarafi and Sulaiman, Erwan and Haron, Zainal Alam and Kosaka, Takashi (2012) Design studies on a new outer-rotor permanent magnet flux switching machine with hybrid excitation flux for in-wheel drive EV applications. In: 5th International Conference on Postgraduate Education (ICPE-5 2012), Universiti Teknologi Malaysia, Skudai, 18-19 December 2012.

Ahmad, Md Zarafi and Sulaiman, Erwan and Khan, Faisal and Haron, Zainal Alam (2014) Electromagnetic flux analysis on a new outer-rotor hybrid excitation flux switching machine. In: 2014 IEEE Asia-Pacific Conference on Applied Electromagnetics, 8-10 December 2014, Johor Bahru, Johor.

Ahmad, Md Zarafi and Sulaiman, Erwan and Khan, Faisal and Haron, Zainal Alam (2014) Design and performance analysis of 12Slot-14Pole HEFSM with outer-rotor configuration. In: 2014 IEEE 8th International Power Engineering and Optimization Conference (PEOCO2014), 24-25 March 2014, Langkawi, Kedah, Malaysia..

Ahmad, Md Zarafi and Sulaiman, Erwan and Kosaka, T. (2015) Analysis of high torque and power densities outer-rotor PMFSM with DC excitation coil for in-wheel direct drive. Journal of Magnetics, 20 (3). pp. 265-272. ISSN 12261750

Ahmad, Md Zarafi and Sulaiman, Erwan and Kosaka, Takashi (2015) Optimization of outer-rotor hybrid excitation FSM for in-wheel direct drive electric vehicle. In: 2015 IEEE International Conference on Mechatronics (ICM), 06 Mar - 08 Mar 2015, Nagoya Institute of Technology Gokiso, Showa Nagoya, Japan.

Ahmad, Md Zarafi and Sulaiman, Erwan and Romalan, G. M. and Othman, S. M. N. S. and Haron, Zainal Alam (2015) Optimizing of outer-rotor hybrid excitation flux switching motor for direct drive electric vehicle application. International Conference on Advanced Mechanics, Power and Energy 2015 “Special issue AMPE2015” . pp. 35-43. ISSN 1112-5209

Ahmad, Md Zarafi and Sulaiman, Erwan and Romalan, G.M. and Haron, Zainal Alam (2015) Optimal torque investigation of outer-rotor hybrid excitation flux switching machine for in-wheel drive EV. In: International Conference on Electrical and Electronic Engineering 2015 (IC3E 2015), 10-11 August 2015 , Melaka, Malaysia.

Ahmad , Md. Zarafi (2016) Design and optimisation of outer-rotor hybrid excitation flux switching motor. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Ahmad Mazlan, Nor Adillah (2014) Design improvements of 12 slot-14 pole hybrid excitation flux switching motor with 1.0kg permanent magnet for hybrid electric vehicles. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ali, Hassan and Sulaiman, Erwan and Khan, Faisal and Naufal, Syed Mohammad (2015) Magnetic flux analysis of various flux switching motors using segmental rotor for hybrid electric vehicles. International Conference on Advanced Mechanics, Power and Energy 2015 (AMPE2015) . pp. 53-61. ISSN 1112-5209

Alir, Afifah (2013) Simulation of speed tracking for brushless DC motor using fuzzy logic controller. Masters thesis, Universiti Tun Hussein Onn Malaysia.

B

Bahron, Zakria Ahmed S. (2014) Development of synchronverter control for induction motor connection. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Berahim, Nawi (2014) Development of PID voltage control for DC motor using arduino. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Bernard, Albinus (2013) Speed control of separately excited DC motor using artificial intelligent approach. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Bohari, Azuwien Aida (2016) Speed tracking of indirect field oriented control induction motor using neural network. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Bohari, Azuwien Aida and Utomo, Wahyu Mulyo and Haron, Zainal Alam (2015) Neural network based speed control of induction motor with IFOC technique. In: International Conference on Electrical and Electronic Engineering 2015 (IC3E 2015), 10-11 August 2015 , Melaka, Malaysia.

Bohari, Azuwien Aida and Utomo, Wahyu Mulyo and Haron, Zainal Alam and Sim, Sy Yi and Zin, N. M. and Ariff, R. M. (2012) Vector control of induction motor using neural network. In: 5th International Conference on Postgraduate Education (ICPE-5 2012), Universiti Teknologi Malaysia, Skudai, 18-19 December 2012.

Boharia, Azuwien Aida and Utomoa, Wahyu Mulyo and Harona, Zainal Alam and Muhd. Zina, Nooradzianie and Sy , Yi Sima and Mat Ariffa, Roslina (2013) Speed tracking of indirect field oriented control induction motor using neural network. In: 4th International Conference on Electrical Engineering and Informatics (ICEEI 2013), 24-25 June 2013, Universiti Kebangsaan Malaysia.

Bollah , Javadius (2013) Overspeed correction scheme for DC motor using artifical intelligent approach. Masters thesis, Universiti Tun Hussein Onn Malaysia.

C

Che Ab Aziz, Mohd Fahmi (2015) Design and optimization of hybrid excitation flux switching machine (Hefsm) 12slot-14pole. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Che Muhamad Khabali, Mohd Khazani (2014) Investigation of increasing fault gas in excitation transformers. Masters thesis, Universiti Tun Hussein Onn Malaysia.

D

Deraman, Farih (2014) Development of P resonant current control for DC motor by using Arduino. Masters thesis, Universiti Tun Hussein Onn Malaysia.

G

Goh , Hui Hwang and Kok , Boon Ching and Looi, Ming Sum (2010) A study of induction motor starting methods in terms of power quality. In: Engineering Conference 2010 (ENCON 2010) , 14-15 April 2010, Kuching, Sarawak.

Gorep , Nor Aizila (2013) Induction motor controller using fuzzy logic. Masters thesis, Universiti Tun Hussein Onn Malaysia.

H

Haron, Hartini Sharninayati (2013) Linear quadratic regulator (LQR) controller design for dc servo motor. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Hassan, Muhammad Kamaluddin and Sulaiman, Erwan and Romalan, Gaddafi M. and Omar, Mohd Fairoz and Husin, Zhafir Aizat (2015) Air gap analysis of a novel dual rotor hybrid excitation flux switching machine (DR-HEFSM). In: International Conference on Electrical and Electronic Engineering 2015 (IC3E 2015), 10-11 August 2015, Melaka, Malaysia.

Hassan, Muhammad Kamaluddin and Sulaiman, Erwan and Romalan, Gaddafi M. and Omar, Mohd Fairoz and Jenal, Mahyuzie (2015) Flux analysis of a novel dual rotor hybrid excitation flux switching machine (DRHEFSM). ARPN Journal of Engineering and Applied Sciences, 10 (16). pp. 7064-7069. ISSN 1819-6608

Hassan Suliman, Khaled Abubaker (2013) Simulation of AC-DC converter for DC motor application using fuzzy logic control. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Husain , Adnan and Leman, Abd Mutalib and Yusof, Mohamad Zainal and Che Wan Ismail, Che Wan Mohd Izuddin (2011) The simulation of brake and modelling of brake pad alert system for teaching and learning purposes based on current automotive brake pad design. Project Report. Universiti Tun Hussein Onn Malaysia. (Unpublished)

Husin, Zhafir Aizat (2015) Design and optimization of three field excitation flux switching motors for hybrid electric vehicles. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Husin, Zhafir Aizat and Sulaiman, Erwan and Mazlan, Mohamed Mubin Aizat and Syed Othman, Syed Muhammad Naufal (2014) Performances comparison of 12s-10p and 12s-14p of field excitation flux switching motor for hybrid electric vehicle. In: The 2nd Power and Energy Conversion Symposium (PECS 2014) , 12 May 2014, Universiti Teknikal Malaysia,Melaka .

Hussian, Ammar Husaini (2014) PID-hysteresis voltage control technique for three phase induction motor (MATLAB SIMULINK and ARDUINO). Masters thesis, Universiti Tun Hussein Onn Malaysia.

Hussin, Mohd Najib (2014) Three phase inverter for induction motor by using PI-repetitive controller with Arduino. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Hussin, Noraziah (2014) Frequency response on the effect of combine cycle load rejection test. Masters thesis, Universiti Tun Hussein Onn Malaysia.

I

Ibrahim, Ismail Ishaq (2014) Performance studies of HEFSM with 6 slot- 7 pole for HEV application. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ibrahim, Mohd Halim Irwan and Said, M. N. and Asmawi, Rosli (2014) Characterization of carbon brush from coconut shell for railway application. In: International Integrated Engineering Summit (IIES 2014), 1-4 December 2014, Universiti Tun Hussein Onn Malaysia, Johor.

Iderus, Samat (2014) The field oriented control of a permanent magnet synchrounous motor (PMSM) by using fuzzy logic. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ismail @ Marzuki, Mohd Saiful Najib (2014) Hysteresis voltage control technique for three phase induction motor (Matlab Simulink and Arduino). Masters thesis, Universiti Tun Hussein Onn Malaysia.

J

Jafar, Nurul 'Ain (2016) A comparative study between PMFSM and HEFSM with iron flux bridges for HEV applications. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Jafar, Nurul ‘Ain and Sulaiman, Erwan and Rahimi, Siti Khalidah (2015) Parameter sensitivity of 12S-10P HEFSM with iron flux bridges for HEV applications. In: International Conference on Electrical and Electronic Engineering 2015 (IC3E 2015), 10-11 August 2015, Melaka, Malaysia.

Jafar, Nurul ‘Ain and Sulaiman, Erwan and Rahimi, Siti Khalidah (2014) Performance analysis of 12s-10p hefsm with various flux bridges. In: International Integrated Engineering Summit (IIES 2014), 1-4 December 2014, Universiti Tun Hussein Onn Malaysia, Johor.

Jenal, Mahyuzie and Sulaiman, Erwan (2015) Comparative study on a new permanent magnet flux switching machine configuration over segmental and salient rotor structure. In: International Conference on Electrical and Electronic Engineering 2015 (IC3E 2015), 10-11 August 2015 , Melaka, Malaysia.

Jenal, Mahyuzie and Sulaiman, Erwan and Khan, Faisal and Ahmad, Md Zarafi (2015) Preliminary design of salient rotor three-phase permanent magnet flux switching machine with concentrated winding. In: 9th International Power Engineering and Optimization Conference (PEOCO 2015), 18-19 March 2015, Hotel Equatorial, Melaka .

Jenal, Mahyuzie (2009) Performance characteristics of inverter driven synchronous motor. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Jenal, Mahyuzie and Sulaiman, Erwan (2015) Investigative study of a novel permanent magnet flux switching machine employing alternate circumferential and radial permanent magnet. ARPN Journal of Engineering and Applied Sciences, 10 (15). pp. 6513-6519. ISSN 18196608

Jenal, Mahyuzie and Sulaiman, Erwan and Ahmad, Md Zarafi and Zakaria, S. N. U. and Utomo, Wahyu Mulyo and Zulkifli, Shamsul Aizam and Abu Bakar, Afarulrazi (2013) Design study of single and three-phase synchronous generator using J-MAG designer. In: 2013 IEEE International Conference on Clean Energy and Technology (CEAT 2013), Bayview Hotel, Langkawi, 18-20 November 2013.

K

KSM Kader Ibrahim, Babul Salam and Hat, Mohd Kamal and M.A., N. Aziah and Hassan, M.K. (2015) Moga tuned pi-fuzzy logic control for 3 phase induction motor with energy efficiency for electric vehicle application. In: International Conference on Electrical and Electronic Engineering 2015 (IC3E 2015), 10-11 August 2015, Melaka, Malaysia.

Kamarudin, Muhammad Saufi (2013) Experimental investigation of cf3i-co2 gas mixtures on the breakdown characteristics in uniform and nonuniform field configurations. PhD thesis, Cardiff University.

Karthigesu, Nagarajoo and Kantan, P. Saminathan (2013) Corn thresher. In: Persidangan Penyelidikan dan Inovasi kali ke-2 (PePIN 2013), 5-7 Julai 2013, Seberang Prai, Pulau Pinang. (Unpublished)

Katim, Nurul Izzatul Akma (2013) Asset management decision making of power transformer with insulation agieng knowledge. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Khan, Faisal and Sulaiman, Erwan and Omar, M. F. (2015) Design and characteristic investigations of 12slot-8pole and 12slot-10pole wound field three-phase switched-flux machines. In: 3rd IET International Conference on Clean Energy and Technology (CEAT 2014), 24-26 November 2014, Merdeka Palace Hotel and Suites, Kuching, Sarawak.

Khan, Faisal and Sulaiman, Erwan and Omar, Mohd Fairoz (2015) Low cost and robust rotor three-phase wound-field switched-flux machines for HEV applications. In: International Conference on Electrical and Electronic Engineering 2015 (IC3E 2015), 10-11 August 2015, Melaka, Malaysia.

Khan, Faisal and Sulaiman, Erwan and Ahmad, Md Zarafi (2014) Performance comparison of 24slot-10pole and 12slot-8pole wound field three-phase switched-flux machine. In: The 2nd Power and Energy Conversion Symposium (PECS 2014) , 12 May 2014, Universiti Teknikal Malaysia, Melaka .

Khan, Faisal and Sulaiman, Erwan and Ahmad, Md Zarafi and Husin, Zhafir Aizat (2015) Design and analysis of wound field three-phase flux switching machine with non-overlap windings and salient rotor. International Journal on Electrical Engineering and Informatics, 7 (2). pp. 323-333. ISSN 20875886

M

M. Romalan, Gadafi (2016) Design and development of a small scale 12S-14P outer rotor HEFSM. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Masdar, Aizan and KSM Kader Ibrahim, Babul Salam and Abdul Jamil , Muhammad Mahadi (2012) Development of low-cost current controlled stimulator for paraplegics. International Journal of Integrated Engineering , 4 (3). pp. 40-47. ISSN 2229-838X

Masri, Muhammad Zakhwan (2017) Investigation on air + CO2 gas mixtures under lightning impulse. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mat Ariff, Roslina and Hanafi, Dirman and Utomo, Wahyu Mulyo and Kok , Boon Ching and Zin, N. M. and Sim, Sy Yi and Bohari, Azuwien Aida (2012) Fuzzy logic control design for field oriented control to improve induction motor drive system. In: 5th International Conference on Postgraduate Education (ICPE-5 2012), Universiti Teknologi Malaysia, Skudai, 18-19 December 2012.

Mat Hussin, Azman (2014) Direct torque control induction motor drives. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mat Jubadi, Warsuzarina (2015) Modelling of advanced submicron Gate InGaAs/InAlAs pHEMTS and RTD devices for very high frequency applications. PhD thesis, University of Manchester.

Mat Zain, Mohd Kamal (2015) Performance investigation OF 6s-4P, 6s-5P, 6s-7P and 6s-8P HEFSM. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mazlan, Mohamed Mubin Aizat (2016) Design optimization of single-phase inner-rotor and outer-rotor hybrid excitation flux switching machine for EV applications. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mod Arifin, Ahmad Izzat (2014) Hysteresis current control technique for three phase induction motor (MATLAB Simulink & ARDUINO). Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohamad Zawahid, Sakinah (2016) Fabrication of carbon brush by using palm oil shell for railway application. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohamed, Mohamed Hashi (2014) Design of defected ground structure (DGS) for mutual coupling reduction of microstrip antenna array. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohamed , Hazizul (2013) Smart torque control for overloaded motor using artificial intelligence approach. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohamed Tazudin, Faizul Rizal (2014) PI hysteresis current control technique for three phase induction motor by using Matlab and Arduino. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohamud Arab, Abdifatah (2016) Fundamental study and optimization of outer-rotor hybrid excitation flux switching generator for grid connected wind turbine applications. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Ariff, Mohd Hisyam (2008) Field estimation of induction motor performance using dynamometer method and equivalent circuit method. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Kasim , Ct Valkyis (2013) Analysis of existing effectiveness and method to enhance the lightning, shielding and earthing protection schemes applied on the Parit Raja’s telecommunication tower system. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Khalid, Maizahtulakma (2014) Design improvement and performance analysis of a 6 slot 7 poles outer rotor HEFSM for direct drive electric vehicles. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Shaari, Mohd Syahmi (2016) Reducing magnetic flux leakage of linear induction motor by chamfering method. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Muftah Saad , Ferass A. (2011) Predicting transformer end of life using transformer thermal life simulation technique. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Muhammad Zin, Nooradzianie (2016) Speed control of permanent magnet synchronous motor using artificial neural network. Masters thesis, Universiti Tun Hussein Onn Malaysia.

N

Nayan, Nafarizal and Sunya, Kikuchi and Koichi, Sasaki (2015) Sticking probabilities of Cu, Zn, Sn, and S atoms in magnetron sputtering plasmas employing a Cu2ZnSnS4 stoichiometric target. Vacuum, 121 (2015). pp. 26-31. ISSN 0042-207X

Nik Supian, Nik Mohd Azri (2013) Sensitivity study on influencing parameters of transformer thermal model with directed oil flow. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Nor Azmuddin, Hafizah (2014) Air breakdown characteristics in rod-plane and sphere-plane electrode configuration under lightning impulse. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Nusrat, Ahmed Ibrahem (2014) Inverter controller using synchronous generator mathematical model. Masters thesis, Universiti Tun Hussein Onn Malaysia.

O

Omar, Mohd Fairoz (2016) Development of a new single-phase field excitation flux switching motor topology with segmental rotor. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Omar, Mohd Fairoz and Sulaiman, Erwan and Khan, Faisal and M Romalan, Gadafi and Husin, Zhafir Aizat (2015) Comparison between single-phase and three-phase FEFSM with non-overlap windings and salient rotor. In: International Conference on Electrical and Electronic Engineering 2015 (IC3E 2015), 10-11 August 2015, Melaka, Malaysia.

Omar, Mohd Fairoz and Sulaiman, Erwan and Khan, Faisal and Jenal, Mahyuzie and M Romalan, Gadafi (2015) Prototype development of a new single-phase FEFSM segmented rotor for high density air conditioner. ARPN Journal of Engineering and Applied Sciences, 10 (16). pp. 7080-7085. ISSN 18196608

Oon, Syahira Raihan (2013) Lifetime prediction and estimation of power transformer. Masters thesis, Universiti Tun Hussein Onn Malaysia.

P

Ponniran, Asmarashid and Orikawa, Koji and Matsuura, Koichi and Itoh, Jun-ichi (2014) Size reduction of DC-DC converter using flying capacitor topology with small capacitance. IEEJ Journal of Industry Applications, 3 (6). pp. 446-454. ISSN 2187-1108

R

Radzi, Mohd Fhaizal (2014) Effect of various rotor pole number of field excitation flux switching motor. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Rahimi, Siti Khalidah and Sulaiman, Erwan and Jafar, Nurul ‘Ain (2015) Design and optimization of hybrid excitation flux switching machine with FEC in radial direction. In: 9th International Power Engineering and Optimization Conference (PEOCO 2015), 18-19 March 2015, Hotel Equatorial, Melaka .

Rahimi, Siti Khalidah and Sulaiman, Erwan and Jenal, Mahyuzie and Ahmad, M.Z. and Jafar, Nurul ‘Ain (2015) Demagnetization analysis of a new HEFSM with 12-slot 10-pole and 12-slot 14-pole configurations. In: International Conference on Electrical and Electronic Engineering 2015 (IC3E 2015), 10-11 August 2015, Melaka, Malaysia.

Ramadan Dofan , Jamal Ali (2011) Study on thermal model for calculating transformer hot spot temperature. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ramli, Sofwan (2013) Design and simulation by using Smart Power Module (SPM) to increase efficiency in motor drive application. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Rosdi, Hairierosniza (2014) Air breakdown characteristics in plane-plane and sphere gap electrode configuration under lightning impulse. Masters thesis, Universiti Tun Hussein Onn Malaysia.

S

Saad, Abdul Salam (2014) Three phase inverter for induction motor control using fuzzy-pi controller with Arduino. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Said, Salmiza (2014) Design study of hybrid excitation flux switching motor for electric vehicles. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Saidin, Syahfitri (2013) Design and simulation of leakage current in Smart Power Module (SPM) motor drive application. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Sidik, Mohd Azkar (2015) AC motor speed performance improvement using fuzzy logic control. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Sim, Sy Yi (2016) Efficiency optimization of a direct torque control (DTC) induction motor drive. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Sim, Sy Yi and Utomo, Wahyu Mulyo and Haron, Zainal Alam and Bohari, Azuwien Aida and Zin, N. M. and Ariff, R. M. (2012) Direct torque control induction motor drive using neural network controller. In: 5th International Conference on Postgraduate Education (ICPE-5 2012), Universiti Teknologi Malaysia, Skudai, 18-19 December 2012.

Soomro, Hassan Ali (2016) A new structure of 12sS-8P hybrid excitation flux switching motor using segmental rotor. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Soomro, Hassan Ali and Sulaiman, Erwan and Khan, Faisal (2014) Comparative performance of FE-FSM, PM-FSM and HE-FSM with segmental rotor. In: International Integrated Engineering Summit (IIES 2014), 1-4 December 2014, Universiti Tun Hussein Onn Malaysia, Johor.

Sulaiman, Erwan and Ahmad, Md Zarafi and Haron, Zainal Alam and Kosaka, T. (2012) Design studies and performance of HEFSM with various slot-pole combinations for HEV applications. In: 2012 IEEE International Conference on Power and Energy (PECon), 2-5 December 2012, Kota Kinabalu Sabah, Malaysia.

Sulaiman, Erwan and Ali, Hassan and Aizat, Mubin and Aizat, Zhafir (2015) Improved design of three phase hybrid excitation flux switching motor (HEFSM) with segmental rotor. In: 9th International Power Engineering and Optimization Conference (PEOCO 2015), 18-19 March 2015, Hotel Equatorial, Melaka.

Sulaiman, Erwan and Md Teridi, Muhammad Fadhil and Ahmad, Md Zarafi and Haron, Zainal Alam (2012) Development of low cost field excitation flux switching machine with single direction of DC field current. In: 5th International Conference on Postgraduate Education (ICPE-5 2012), Universiti Teknologi Malaysia, Skudai, 18-19 December 2012.

Sulaiman, Erwan and Omar, M. F. and Khan, F. and Husin, Zhafir Aizat (2014) New structure of single-phase field excitation flux switching machine for high density air conditioner with segmental rotor. In: 3rd IET International Conference on Clean Energy and Technology (CEAT 2014), 24-26 November 2014, Merdeka Palace Hotel and Suites, Kuching, Sarawak.

Sy , Yi Sima and Haron, Zainal Alam and Muhd. Zina, Nooradzianie and Utomo, Wahyu Mulyo and Bohari, Azuwien Aida and Mat Ariff, Roslina (2014) Speed controller of induction motor using neural network. In: The 2nd Power and Energy Conversion Symposium (PECS 2014) , 12 May 2014, Universiti Teknikal Malaysia,Melaka .

Syed Othman, Syed Muhammad Naufal (2016) Design of outer rotor field excitation flux switching motor for direct-drive application. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Syed Othman, Syed Muhammad Naufal and Sulaiman, Erwan and Khan, Faisal and Husin, Zhafir Aizat and Mazlan, Mohamed Mubin Aizat (2014) Performance comparison of 12s-14p inner and outer rotor field excitation flux switching motor. In: International Integrated Engineering Summit (IIES 2014), 1-4 December 2014, Universiti Tun Hussein Onn Malaysia, Johor.

U

Umar, Mohd Khairul Adzhar (2014) Design of fuzzy controller of IPMSM for electric vehicle application. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Utomo, Wahyu Mulyo and Muhammad Zin, Nooradzianie and Haron, Zainal Alam and Sy , Yi Sim and Bohari, Azuwien Aida and Mat Ariff, Roslina and Hanafi, Dirman (2014) Speed tracking of field oriented control permanent magnet synchronous motor using neural network. International Journal of Power Electronics and Drive System (IJPEDS), 4 (3). pp. 290-298. ISSN 2088-8694

Utomo, Wahyu Mulyo and Sim, Sy Yi and Haron, Zainal Alam and Zin, N. M. (2015) Online adaptive flux control for space vector PWM-DTC IM drives towards optimum efficiency design. In: International Conference on Electrical and Electronic Engineering 2015 (IC3E 2015), 10-11 August 2015 , Melaka, Malaysia.

W

Wan Abas, Wan Hamidah (2014) Online position control system using incremental fuzzy control. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Wan Chek, Wan Ahmad Khusairi (2014) PI voltage control technique for 3 phase induction motor using Simulink and Arduino. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Wan Husin, Wan Norhashimah (2014) Design improvement of outer-rotor hybrid excitation flux switching motor for in-wheel drive electric vehicle. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Y

Yaqoob, Mansoor Taha (2013) Transformer thermal model of the disk coils with non directed oil flow. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Yaziz, Nor Hidayah (2014) Digital speed and position control system incorporating an incremental encoder. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Yunus, Nazira (2014) Design study of the proposed 12slot-14pole field excitation flux switching machine (FEFSM) for hybrid electric vehicles. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Yusoff, Noor Ain (2015) Effect of field utilization factor on air breakdown level under lightning impulse. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Z

Zainalabidin, Mohd Hazreek and Saad, Rosli and Wijeyesekera, Devapriya Chitral and Ahmad, Fauziah (2013) Soil resistivity influence due to the different utilization of electrical resistivity array. Electronic Journal of Geotechnical Engineering, 18 (X). ISSN 1089-3032

Zakaria, Siti Nur Umira (2015) Performance investigation of three-phase and single-phase e-core hybrid excitation flux switching motor for hybrid electric vehicle applications. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Zakaria, Siti Nur Umira and Sulaiman, Erwan (2014) Magnetic flux analysis of E-core hybrid excitation flux switching motor with various topologies. In: IEEE Asia-Pacific Conference on Applied Electromagnetics (APACE 2014), 8 - 10 December 2014, Johor Bahru, Johor, Malaysia.

Zakaria, Siti Nur Umira and Sulaiman, Erwan (2014) Magnetic flux analysis of e-core hybrid excitation flux switching motor with various topologies. In: IEEE Asia-Pacific Conference on Applied Electromagnetics (APACE 2014), 8 - 10 December 2014, Johor Bahru, Johor, Malaysia.

Zakaria, Siti Nur Umira and Sulaiman, Erwan and Aizat, Mohamed Mubin (2014) Optimization of single phase e-core hybrid excitation flux switching machine. In: International Integrated Engineering Summit (IIES 2014), 1-4 December 2014, Universiti Tun Hussein Onn Malaysia, Johor.

Zin, N. M. and Utomo, Wahyu Mulyo and Haron, Zainal Alam and Bohari, Azuwien Aida and Sim, Sy Yi and Ariff, R. M. (2012) Speed control of permanent magnet synchronous motor using neural network. In: 5th International Conference on Postgraduate Education (ICPE-5 2012), Universiti Teknologi Malaysia, Skudai, 18-19 December 2012.

Zin, N.M. and Utomo, Wahyu Mulyo and Haron, Zainal Alam (2015) The implementation of permanent magnet synchronous motor speed tracking based on linear artificial neural network. In: International Conference on Electrical and Electronic Engineering 2015 (IC3E 2015), 10-11 August 2015 , Melaka, Malaysia.

Zulkifli, Shamsul Aizam and Ahmad, Md Zarafi (2011) Linear generator models in simulink block. In: IEEE International Conference on Power and Energy (PECon2010), 29 Nov-1 Dec 2010, Kuala Lumpur, Malaysia.

Zulkifli, Shamsul Aizam and Hussin, Mohd Najib and Saad, Abdul Salam (2014) MATLAB-Arduino as a low cost microcontroller for 3 phase inverter. In: 2014 IEEE Student Conference on Research and Development (SCOReD), 16-17 December 2014, Penang, Malaysia.

This list was generated on Sat Nov 18 06:31:59 2017 MYT.