UTHM Institutional Repository

Items where Subject is "T Technology > TK Electrical engineering. Electronics Nuclear engineering > TK2896-2986 Production of electricity by direct energy conversion"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type
Jump to: A | B | F | G | I | J | M | N | R | S | T | Y | Z
Number of items at this level: 32.


A. Malek, Mohammad Hadin and Mustafa Malek, Farahiyah and Mohd Asry, Anis Maisarah (2019) A battery-less power supply using supercapacitor as energy storage powered by solar. International Journal of Power Electronics and Drive System (IJPEDS), 10 (1). pp. 568-574. ISSN 2088-8694

Abd Rahman, Hamimah (2013) Komposit nano La0.6 Sr0.4 Co0.2 Fe0.8O3-8−SDC karbonat sebagai katod bagi sel fuel oksida pepejal bersuhu rendah. PhD thesis, Universiti Kebangsaan Malaysia.

Abdul Mutahar, Lidyanur (2014) Development of repetitive current control for lead acid battery using Arduino. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdul Talib, Yuraimy Yakimin (2014) Optimization of Pedot: PSS thin film for organic solar cell application. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdullah, Nur Munirah and Mohd Rus, Anika Zafiah and Abdullah, Mohammad Faiz Liew (2013) Influence of additive on the performance of energy conversion solar cell. In: Advanced Materials Engineering and Technology (ICAMET 2013) , 28-29 November 2013, Bandung, Indonesia .

Agun, Linda and Abd Rahman, Hamimah and Ahmad, Sufizar and Muchtar, Andanastuti (2014) Influence of binary carbonate on the properties of low temperature cathode composite SOFC. In: International Conference on X-Ray & Related Technique in Research and Industry (ICXRI2014), 11-13 August 2014 , Johor Bahru, Johor.

Ahmad, M.K. and Murakami, K. (2013) Rutile-phased TiO, nanorods and nanoflowers for rutile-based dye-sensitized solar cell. In: International Conference on Nanoscience and Nanotechnology 2013 (NANO-SciTech 2013), 1-4 March 2013, Shah Alam, Selangor. (Unpublished)

Ahmad, Mohd Khairul and Kenji, Murakami (2013) Effect of surface morphology of nanostructured rutile TiO2 nanorods/nanoflowers as photoelectrode on the performance of dye-sensitized solar cell. In: 2nd International Conference on Solar Energy Materials, Solar Cells and Solar Energy Applications , 22-24 Ogos 2013, Universiti Malaya.

Ahmad, Mohd Khairul and Mohan, V. M. and Murakami, K. (2015) Hydrothermal growth of bilayered rutile-phased TiO2 nanorods/micro-sizeTiOz flower in highly acidic solution for dye-sensitized solar cell. Joumal of Sol-gel Science and Technology, 73. pp. 655-659. ISSN 0928-0707

Ahmad, Mohd Khairul and Rasheid, N. A. and Wan Zaki , Wan Suhaimizan and Zain Ahmed, A. and Abdullah, S. and Rusop, M. Fabrication of transparent titanium dioxide thin film at low temperature by Sol-gel Spin Coating Method. In: The 3rd Malaysian Technical Universities Conference on Engineering and Technology (MUCEET2009), 20-22 June 2009, Kuantan, Pahang.

Azizan, Mohd Fikri (2017) A comprehensive fractal approach in determination of the effective thermal conductivity of gas diffusion layers in polymer electrolyte membrane fuel cells. Masters thesis, Universiti Tun Hussein Onn Malaysia.


Bakar, M. Subri A. and Ahmad, Sufizar and Abd Rahman, Hamimah and Basri, Hatijah and A., Muchtar (2014) EDS and TG analysis of composite cathode powders LSCF-SDCC for low temperature solid oxide fuel cells (LTSOFC). In: International Integrated Engineering Summit (IIES 2014), 1-4 December 2014, Universiti Tun Hussein Onn Malaysia, Johor.

Buhari, Mamman Hassan (2017) Optimization of low amplitude pulse electric field exposure on colon cancer cell for wound healing application. PhD thesis, Universiti Tun Hussein Onn Malaysia.


Feriyanto, Dafit (2014) Development of nanocrystalline Fe80Cr20 alloy using combination technique of ball milling and ultrasonic treatment for fuel cell interconnector. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Feriyanto, Dafit and Idris, Maizlinda Izwana and Sebayang, Darwin and Untoro, P. and Othman, Mohd Ashraf (2013) Microstructure study on Fe/Cr based alloys added with yttrium oxide (Y2o3) prepared via ultrasonic technique for solid oxide fuel cell (Sofc) application. In: 1st International Conference on Mechanical Engineering (iCOME 2013) , 12-14 September 2013, Lombok, Indonesia .


Goh, H. H. and Ling, C. W. and Chua, Q. S. and Goh, K. C. and Lee, S. S. (2016) Multilevel inverter for standalone application with selective harmonic elimination. In: International Symposium on Industrial Electronics (INDEL), 3-5 November 2016, Banja Luka, Bosnia Herzegovina .


Isa, Muzamir (2004) Investigation in fuel cells using hydro-genius teach. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.


Jumaat, Siti Amely and Mohamad, Firdaus and Zulkifli, Shamsul Aizam (2016) Development of portable case solar battery charger. Electrical and Electronic Engineering, 6 (4). pp. 55-61. ISSN 21628459


M. Idris, A. A. and Arsat, R. and Ahmad, M. K. and Sidek, F. (2017) Comparison of deposition methods of ZnO thin film on flexible substrate. Indonesian Journal of Electrical Engineering and Computer Science, 5 (3). pp. 536-541. ISSN 25024760

M. Jamail, N. A. and Zarujhan, N. A. A. N. and Muhamad, N. A. (2016) Breakdown characteristic of LLDPE-NR nanocomposite using high voltage direct current (HVDC) test. International Journal of Simulation Systems, Science & Technology, 17 (41). 38.1-38.5. ISSN 1473804x

Mohamed, F.N. and A. Rahim, M.S. and Nayan, Nafarizal and Ahmad, M.K. and Sahdan, Mohd Zainizan and Lias, Jais (2015) Influence of TiO2 thin film annealing temperature on electrical properties synthesized by CVD technique. In: International Conference on Electrical and Electronic Engineering 2015 (IC3E 2015), 10-11 August 2015, Melaka, Malaysia.

Mohamed, Mohd Rusllim (2004) Decision tree-based approach for online management of pem fuel cells for residential application. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Mohd Zain, Fadzly (2014) Limitation of lithium fluoride (LiF) properties for passivation layer in organic solar cells application. Masters thesis, Universiti Tun Hussein Onn Malaysia.


Ng, Kei Hoa (2018) Investigations of Ni-SDC carbonate (Ni-SDCC) as composite anode for low temperature solid oxide fuel cells. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Nordin, Normayati (2009) Limitations of commercializing fuel cell technologies. In: 10th Asian International Conference On Fluid Machinery, 21-23 October 2009, Kuala Lumpur Malaysia.


Riyaz Ahmad , Mohamed Ali and Ahmad Nasrull, M. and Nayan, Nafarizal (2010) Properties of TiO2 film with dragon fruit and blueberry fruit dyes for dye-sensitized solar cell application. In: Malaysian Technical Universities Conference on Engineering and Technology (MUCET 2010), 28-29 Jun 2010, Melaka, Malaysia .


Sahdan, Mohd Zainizan and Malek, M. F. and Alias, M. S. and Kamaruddin, S. A. and Norhidayah, C. A. and Sarip, N. and Nayan , Nafarizal and Rusop, M. (2015) Fabrication of inverted bulk heterojunction organic solar cells basedon conjugated P3HT:PCBM using various thicknesses of ZnO bufferlayer. Optik, 126. pp. 645-648. ISSN 0030-4026

Suhairi, Lidiyawati (2014) Komposit nano nikel oksida-samarium terdop seria karbonat-argentum (NiO-SDCC-Ag) sebagai anod bagi sel fuel oksida pepejal bersuhu rendah. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Sulistyo, Sulistyo (2015) Production of single cell anode-supported SOFC using NiO/YSZ-YSZ-LSM/YSZ powder materials. PhD thesis, Universiti Tun Hussein Onn Malaysia.


Tahan, Muliana and Nayan, Nafarizal and Bakri, Anis Suhaili and Rizan, Elfa Rizon (2019) Light emitting diode (LED) chip fabrication using low temperature processes. In: Current Advances in Microdevices and Nanotechnology. Penerbit UTHM, pp. 149-164. ISBN 978-967-2306-25-2


Yahaya, Jabbar A. F. and Mansor, Muhamad (2017) Switching speed improvements in multiphase buck converter via two-shunt voltage-sources. Journal of Applied Environmental and Biological Sciences, 7 (6S). pp. 1-6. ISSN 20904274


Zambri, Nor Aira (2014) Kawalan dan pengurusan optimum bagi penjana teragih berasaskan sel fuel menggunakan teknik logik kabur dan rangkaian neural. PhD thesis, Universiti Kebangsaan Malaysia.

This list was generated on Wed Aug 5 13:02:01 2020 +08.