Items where Subject is "T Technology > TL Motor vehicles. Aeronautics. Astronautics > TL1-484 Motor vehicles. Cycles"

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Creators | Item Type
Jump to: A | B | G | H | J | K | L | M | N | P | R | S | T | W | Y | Z
Number of items at this level: 58.

A

Ab Ghafar, Fauzi (2015) Driving cycle for small and medium duty engine: case study of Ipoh. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abd Khalid, Muhammad Syauqat (2012) Development of position control based on continuously variable transmission (CVT). Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdul, Mohd Rizan (2015) Performance study on the effect of different exhaust length for motorcycle engine. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdul Rahman, Abdul Rashid (2016) Friction material (metal reinforcement) analysis of brake pad for light rail train system. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdul Talib, Muzalwana and Muniasamy, Susila and Ahmed, Shamsuddin (2009) A multivariate control chart scheme for quality monitoring of automotive stamping process - an empirical study of a Malaysian plant. In: Advances in Quality Engineering and Management Reserch (2009), 27 July 2009, Universiti Teknologi Malaysia.

Adrian Bee Tiong , Soon (2013) Intelligent road recognition system for autonomous vehicle. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ambak, Kamarudin and David, Basil Daniel and Mamat, Zaharah and Prasetijo, Joewono and Md Rohani, Munzilah (2014) The effect locus of control on driving behaviour among Malaysian young drivers. In: International Integrated Engineering Summit (IIES 2014), 1-4 December 2014, Universiti Tun Hussein Onn Malaysia, Johor.

Ambak, Kamarudin and David Daniel, Basil and Diman, Khairul (2007) A study on compliance of safety belt usage among car drivers in district of Batu Pahat, Johor. In: National Seminar on Civil Engineering Research (SEPKA 2007), 11-12 December 2007, Universiti Teknologi Malaysia, Skudai.

Ambak, Kamarudin and Hashim, H. and Yusoff, I. and David , Basil Daniel (2010) An evaluation on the compliance to safety helmet usage among motorcyclists in Batu Pahat, johor. International Journal of Integrated Engineering , 2 (2). pp. 1-8. ISSN 2229-838X

Ambak, Kamarudin and Ismail, Rozmi and Abdullah, Riza Atiq and Borhan, Muhamad Nazri (2011) Using structural equation modeling and the behavioral sciences theories in predicting helmet use. In: International Conference on Advanced Science, Engineering and Information Technology 2011, 14-15, January 2011, Hotel Equatorial Bangi-Putrajaya.

Ambak, Kamarudin and Rosli, Naida and David, Basil Daniel and Prasetijo, Joewono (2015) Model penerimaan teknologi lanjutan bagi meramal keinginan menggunakan sistem peringatan topi keledar. Jurnal Teknologi, 77 (1). pp. 163-169. ISSN 2180-3722

Amir, Ahmad Irsyaduddin (2016) Pengaruh pemanduan bas rapid terhadap penggunaan bahan bakar. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Amirnordin, Shahrin Hisham (2009) Computational fluid dynamics (CFD) analysis for a catalytic converter design. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Amirnordin, Shahrin Hisham and Abd. Rahman, Hamimah and Ainuddin @ Nordin, Ainun Rahmahwati and Alimin, Ahmad Jais and Mohd Ali, Mas Fawzi and Rahmat, Norwahdah and Triwahyono, Sugeng (2012) Porous ceramic/zeolite in engine exhaust treatment. Other thesis, Universiti Tun Hussein Onn Malaysia.

Arhami, Arhami and Abdul Wahab, Abas and Hasnan, Khalid Towards the concept design of a personal air-land-water vehicle. In: The 3rd Malaysian Technical Universities Conference on Engineering and Technology (MUCEET2009), 20-22 June 2009, Kuantan, Pahang.

Awang, Muhammad Khairudin (2004) Prediction of noise radiation on cylinder head. Masters thesis, Universiti Teknologi Malaysia.

B

Buhari, Rosnawati Pavement primary response using influence function and peak influence function. In: 2012 International Conference on Civil Engineering and Transportation, 27 - 28 Oktober 2012, Guilin China.

Buhari, Rosnawati and Collop, AC. (2012) Pavement primary response using influence function and peak influence function. In: 2012 International Conference on Civil Engineering and Transportation, 27-28 Oktober 2012, Guilin, China.

Bujang @ Zaman, Izzuddin and Rahman, R. A. (2007) Dynamic analysis, updating and modification of truck chassis. In: Regional Conference on Engineering Mathematics, Mechanics, Manufacturing & Architecture (EM3ARC) 2007, 2007.

G

Ghazali, Mohd Imran (2012) Condition monitoring on textile machine gearbox using oil debris analysis. Other thesis, Universiti Tun Hussein Onn Malaysia.

H

Hassan, Mohd Fahrul (2009) Design and development of an innovative apparatus for producing a spiral catalyst substrate for catalytic converter. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Hassan, M.K. and Azubir, N.A.M and H.M.I, Nizam and Toha, S.F and Ibrahim, B.S.K.K (2012) Optimal design of electric power assisted steering system (EPAS) using GA-PID method. In: International Symposium on Robotics and Intelligent Sensors 2012 (IRIS 2012), 4-6 September 2012, Kuching, Sarawak.

Hushim, Mohd Faisal and Alimin, Ahmad Jais (2010) A review and investigation framework on port-fuel injection for small 4-stroke single cylinder engine. In: Postgraduate Seminar 2010, 29th and 30th November 2010, Universiti Tun Hussein Onn Malaysia.

Hushim, Mohd Faisal and Alimin, Ahmad Jais and Mansor, Mohd Farris (2011) Effect of intake manifold angle of port-fuel injection retrofit-kit to the performances of an S.I. engine. In: Regional Conference on Automotive Research, 14th-15th December 2011, Kuala Lumpur.

Hushim, Mohd Faisal and Alimin, Ahmad Jais and Mohideen Batcha, Mohd Faizal and Mohd Ali, Mas Fawzi and Abdul Rashid, Lukman (2011) Port-fuel injection system for small 4-stroke single cylinder engine: an experimental framework. In: 2nd International Conference on Mechanical and Manufacturing Engineering (ICME 2011), 6th-7th June 2011, Putrajaya International Convention Centre, Putrajaya.

Hushim, Mohd Faisal and Osman, Shahrul Azmir and Alimin, Ahmad Jais and Mohamad, Akmal Nizam and Mustafa, Norrizal and Md Seri, Suzairin and Amirnordin, Shahrin Hisham and Wan Salim, Wan Saiful-Islam and Salleh, Hamidon and Azlan, Mohd Azwir (2011) Perodua Eco-Challenge 2010: ideas of modification from ARG UTHM. In: 2nd International Conference on Mechanical and Manufacturing Engineering (ICME 2011), 6th-7th June 2011, Putrajaya International Convention Centre, Putrajaya.

Husin, Zhafir Aizat and Sulaiman, Erwan and Khan, Faisal and Omar, Mohd Fairoz (2014) Performances comparison of 12S-14P field excitation flux switching motor with overlap and non-overlap windings for hybrid electric vehicles. In: 2014 IEEE Student Conference on Research and Development (SCOReD), 16-17 December 2014, Penang, Malaysia.

J

Jamaluddin, Mohd Fakrul Razi (2015) Characteristic studies on types of paint spray for automotive parts in small and medium industry. Masters thesis, Universiti Tun Hussein Onn Malaysia.

K

Kamaruddin, Muhamad Khiri (2015) Influence of passenger car air conditioner system thermostat level setting to fuel consumption and thermal comfort. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Khalid , Amir and Sapit, Azwan and M. N., Anuar and HIM, Ramsy and Manshoor, Bukhari and Zaman, Izzuddin and Ngali, Mohd Zamani (2014) Analysis of fuel injection parameter on biodiesel and diesel spray characteristics using common rail system. In: 5th International Conference on Mechanical, Industrial and Manufacturing Technologies (MIMT2014), 10-11 Mac 2014, The Gumey Resort hotel & Residence, Pulau Pinang.

L

Lau, Ong Yee (2014) Preliminary design of new concept compact continuously variable transmission. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Leman, Abd Mutalib and Feriyanto, Dafit and Sebayang, Darwin (2015) Catalytic converter material treated by ultrasonic approach. In: Engineering Technology International Conference 2015, 10-11 August 2015, Kuta, Bali, Indonesia.

M

Mazlan, Mohamed Mubin Aizat and Sulaiman, Erwan and Ahmad, Md Zarafi and Syed Othman, Syed Muhammad Naufal (2014) Design optimization of single-phase outer-rotor hybrid excitation flux switching motor for electric vehicles. In: IEEE Student Conference on Research and Development (SCOReD), 16-17 December 2014, Penang, Malaysia.

Md Esa, Muhamad Matta (2013) Mitigating blind spot collision utilizing ultrasonic gap perimeter sensor. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Md Jalil, Mohd Azlis Sani (2005) Development of Al-Cu-SiCp metal matrix composite for automotive applications. Masters thesis, Universiti Malaya.

Md Rohani, Munzilah and Daniel, Basil David and Aman, Mohamad Yusri and Prasetijo, J. and Mustafa, A. A. (2014) The effect of speed camera warning sign on vehicle speed in school zones. Research Journal of Applied Sciences, Engineering and Technology, 8 (23). pp. 2315-2319. ISSN 2040-7467

Md Rohani, Munzilah and David Daniel, Basil and Aman, M. Y. and Prasetijo, J. and Mustafa, A. A. and Rahman, R. (2016) Business hours vs non-business hours in business zone : impact on speed and acceleration. Jurnal Teknologi (Sciences & Engineering), 78 (4). pp. 71-77. ISSN 21803722

Mohd Ariffin , Maslina (2013) Enhancing fuel burning efficiency by regulate spark plug voltage supply. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Nor, Mohd Khir and Dol Baharin, M. Z. (2014) Rollover analysis of heavy vehicle bus. Applied Mechanics and Materials, 660 . pp. 633-636. ISSN 1662-7482

Mohd Rus, Anika Zafiah Penukar katalis (CC)n. In: Inovasi di persada Institut Pengajian Tinggi Malaysia 2011/2012. Universiti Kebangsaan Malaysia, p. 210.

Morsin, Marlia and Lim, Hwei Hwa and Zulkipli , Abdul Majeed and Ab Rahman, Tasiransurini (2010) Smart parking guidance system. In: 3rd Engineering Conference on Advancement in Mechanical and Manufacturing for Sustainable Environment, 14-16 April 2010, Kuching, Sarawak.

N

Ngadiman, Yunos and Abdul Hamid, Nor Aziati and Bon, Abdul Talib and Ahmad, Mohd Fauzi and Raja Mohd Rasi, Raja Zuraidah and Yaw, Martin Yaw Swee Hock (2015) Identification of public awareness in preventive maintenance for personal automobile. In: 2nd International Conference on Industrial Engineering, Management Science and Applications (ICIMSA 2015), 26-28 May 2015, Tokyo, Japan.

P

Pandak Jabo , Nurul Izzati (2013) Safety distance awareness system for Malaysian driver. Masters thesis, Universiti Tun Hussein Onn Malaysia.

R

Ramly, Edly Ferdin and Yusof, Sha'ri Mohd and Abu Bakar, Kamarudin (2009) Effectiveness of quality auditing in the automotive industries - Case study. In: Advances in Quality Engineqing ttd Mmagement, 27 July 2009, Universiti Teknologi Malaysia.

Rashid, L.A and Alimin, Ahmad Jais and Hushim, Mohd Faisal AN OVERVIEW ON DURABILITY STUDY ON A RETROFIT FUEL INJECTION KIT DURING ON-ROAD TESTING. In: Postgraduate Seminar 2010, 29 & 30 November 2010, UTHM.

S

Salleh, Hamidon and Yee, Jingzu and Azahari, Razali (2014) Experimental study on film cooling effectiveness of shallow hole with upstream sister holes. In: International Integrated Engineering Summit (IIES 2014), 1-4 December 2014, Universiti Tun Hussein Onn Malaysia, Johor.

Sanik, Mohd Erwan and Prasetijo, Joewono and Mat Nor, Ahmad Hakimi and Hamid, Nor Baizura and Yusof, Ismail and Putra Jaya, Ramadhansyah (2016) Analysis of car following headway along multilane highway. Jurnal Teknologi, 78 (4). pp. 59-64. ISSN 0127-9696

Sanik, Mohd Erwan and Prasetijo, Joewono and Mustakim, Fajaruddin and Hamid, Nor Baizura and Mat Nor, Ahmad Hakimi and Che Ani, Mohd Safberi (2014) Drivers lane changing behaviour at urban intersection by using gap acceptance approach. In: International Integrated Engineering Summit (IIES 2014), 1-4 December 2014, Universiti Tun Hussein Onn Malaysia, Johor.

Sulaiman, Erwan and Kosaka, T. and Matsui, N. (2011) FEA-based design and parameter optimization study of 6-slot 5-pole PMFSM with field excitation for hybrid electric vehicle. In: IEEE International Conference on Power and Energy (PECon2010), 29 Nov-1 Dec 2010, Kuala Lumpur, Malaysia.

Sulaiman, Erwan and Kosaka, T. and Matsui, N. (2011) High power density design of 6s-16P permanent magnet flux switching machine with field excitation for hybrid electric vehicles. In: 8" International Mini Workshop on Power Electronics & Motion Control, February 2011.

Sulaiman, Erwan and Kosaka, Takashi and Matsui, Nobuyuki (2014) Design and analysis of high-power/high-torque density dual excitation switched-flux machine for traction drive in HEVs. Renewable and Sustainable Energy Reviews, 34 (1). pp. 517-524. ISSN 1364-0321

Sulaiman, Erwan and Kosaka, Takashi and Matsui, Nobuyuki (2011) Parameter optimization study and performance analysis of 6S-8P permanent magnet flux switching machine with field excitation for high speed hybrid electric vehicles. In: 14th European Conference on Power Electronics and Applications (EPE 2011), 30 August - 11 September 2011, Birmingham.

T

Tengku Ahmad , Tengku Marissa (2013) Climate control utilizing solar powered ventilation system for parked car. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Tuan Ameri, Tengku Suzi Mas Ayu (2014) Design study of field excitation flux switching machine for electric vehicles. Masters thesis, Universiti Tun Hussein Onn Malaysia.

W

Wibowo, Ignatius Agung and Ahmad Zamhari, Kemas and Johari, Ayob and Mohd Than, Mohd Nor and Abdul Sukor, Nor Sabahiah and KSM Kader Ibrahim, Babul Salam and Abdullah, Mohd Ezree and Mohd, Mohd Norzali and David , Basil Daniel and Md Nor, Danial and Abd Wahab, Mohd Helmy (2011) Development of high speed multiple sensor weigh in motion system. Project Report. Universiti Tun Hussein Onn Malaysia. (Unpublished)

Y

Yahya, Mohd Shahir (2005) Designing of public vehicle driver's seat. Masters thesis, Universiti Putra Malaysia.

Z

Zaman, Izzuddin (2005) Study of dynamic behaviour of truck chassis. Masters thesis, Universiti Teknologi Malaysia.

This list was generated on Thu Sep 21 16:50:57 2017 MYT.